13 best pentair pool sand filters
Pentair is a well-known manufacturer of pool and spa equipment, including pool sand filters. These filters are essential components of swimming pool filtration systems, helping to keep the pool water clean and clear.Here's what you should know about Pentair pool sand filters:
Filtration Process: Pentair pool sand filters use a sand-based filtration process to remove impurities and particles from the pool water. The sand inside the filter acts as the filtering medium.
Operation: Pool water is pumped into the sand filter, where it passes through the sand bed. As water flows through the sand, the sand traps and removes contaminants and debris, leaving behind clean water. The cleaned water is then returned to the pool.
Multiport Valve: Pentair pool sand filters are often equipped with a multiport valve that allows you to control the flow of water through the filter. This valve typically has several settings, including filtration, backwashing, rinsing, recirculating, and more. Each setting serves a specific purpose in the filtration and maintenance process.
Maintenance: Regular maintenance is essential to ensure the effective operation of Pentair pool sand filters. This includes periodic backwashing to flush out accumulated debris from the sand bed. Over time, the sand may need to be replaced, but this is not a frequent requirement.
Size and Capacity: Pentair offers a range of pool sand filters in different sizes and capacities to suit various pool sizes and filtration needs. It's important to choose the right size filter for your pool to ensure efficient filtration.
Durability: Pentair is known for producing durable and high-quality pool equipment, including sand filters. Their products are designed to withstand the harsh pool environment and provide reliable performance over the years.
Compatibility: Pentair pool sand filters are compatible with Pentair pumps and other pool equipment. It's important to ensure that your filtration system components are compatible for optimal performance.
Warranty: Pentair typically offers warranties on their pool equipment, including sand filters. Be sure to check the specific warranty details when purchasing a Pentair pool sand filter.
Overall, Pentair pool sand filters are trusted and widely used in the pool and spa industry for their effective filtration capabilities and durability. Proper maintenance and sizing are key factors in ensuring that your pool water remains clean and clear with the help of a Pentair sand filter.
Below you can find our editor's choice of the best pentair pool sand filters on the market
Pentair 145241 Tagelus Top Mount Pool Filter - Almond
Pentair
Product description
Pentair 145241 Tagelus TA60D Top Mount Pool Filter - Almond
From the Manufacturer
Start with Tagelus, a sand filter that's been a leader for years. Combine it with the proven, efficient, and durable Dynamo pump. The result is a filtration and circulation system engineered to provide superior performance, and longevity.
- Special lateral design provides superior flow characteristics and long filter cycles for economical operation
- Maximum Operating Pressure 50 psi
- Combination water and sand drain makes servicing and winterizing fast and easy
- 40, 50, and 60D models standard with plastic clamp
User questions & answers
| Question: | Where can i purchase just the top multi port for this particular sand filter as a replacement part |
| Answer: | Yes parts are available. Voted top in parts, service and support. Thank you for your interest. FamilyPoolFun 800-950-2210 |
| Question: | I lost some sand. That issue is fixed. How far from the top do i fill the filter |
| Answer: | The measurement of the freeboard for the TA60 is 10 1/4". Freeboard is the space between the top of the sand to the top of the filter. See the manual for other models or more information. Amazon has a link to download the manual in PDF on this page. |
| Question: | does this have the 1.5" or 2" outlet / inlets |
| Answer: | The valve included with this item is 1.5" If you have any other questions, you can also call 320-695-2899. FamilyPoolFun |
| Question: | How many pounds sand Pentair |
| Answer: | I used about 350-400 pounds |
Pentair Triton II Side Mount Filter TR60 Fiberglass Sand Filter without Valve
Product description
The Triton II Side mount Filter is the original and still industry standard. Pentair's unique process creates a one piece, fiberglass reinforced tank with UV resistant surface finish for years of unequaled stength and durability. This unique method locks in fiberglass, preventing fibers from "blooming" under harsh conditions. The TR60 has 3.14 Sq Ft of effective filtration area and a flow rate of 63 GPM. Turn over Capacity in Gallons : 8 hour (30,240) , 10 Hour (37,800) , and 12 Hour (45,360). (Valve NOT included)
From the Manufacturer
The Triton II Filter is the result of over 40 years of product evolution and refinement. It has set the industry standard for effectiveness, efficiency, long runs between service and providing years of dependable, low maintenance operation. The Triton II filter features a special internal design that keeps the sand bed level, ensuring even water flow and resulting in the most efficient filtration possible. Time proven internal design ensures that all water receives maximum filtration for crystal clear results. Glaslok process creates one-piece, fiberglass-reinforced tank with a UV-resistant coating for years of dependable, corrosion-resistant service. Flow system design controls filtration quality and ensures maximum run times between backwashing to save time.
- Heavy-duty closure provides easy inspection, and features an easy-to-read pressure gauge with air relief valve. (Valve NOT included)
- Swing-away diffuser allows instant access to sand and all internal parts.
- All internal parts are threaded for ease of service.
- Internal air bleed.
- Combination sand and water drain makes servicing and winterizing fast and easy.
- Heavy-duty closure provides easy inspection, and features an easy-to-read pressure gauge with air relief valve
- Swing-away diffuser allows instant access to sand and all internal parts
User questions & answers
| Question: | Hi, can you please advise the exactly package dimension and weight for my reference |
| Answer: | I am very sorry but I no longer have the packaging to answer your question. Here is the customer service number for Pentair, 800.831.7133. They should be able to provide you with that information. I bave been very pleased with their product. |
| Question: | How much sand does it take |
| Answer: | The one that I have uses 300 lbs. |
| Question: | Does this item actually ship prime? I am just wondering as I am a commercial property and need the sand filter fast |
| Answer: | Mine came within days |
| Question: | flow rate |
| Answer: | It's probably dependent on your pump |
Pentair 261050 2-Inch HiFlow Valve with Plumbing for Pool/Spa D.E. and Sand Filter
Pentair
Product description
Pentair 261050 2-Inch HiFlow Valve with Plumbing Replacement Pool/Spa D.E. and Sand Filter
- Solid, injection-molded PVC housing permits leak-free solvent welds to PVC piping.
- Large, reinforced one-piece handle for years of trouble-free operation.
- High efficiency, center intake diverter is made of heavy-duty, glass-filled PPO Resin for strength and heat resistance.
- Full two-inch inlet and outlet ports for unrestricted water flow during all cycles.
- Engineered to accommodate up to 125 gpm flow rates with proper system plumbing and compatible pump/filter combinations.
User questions & answers
| Question: | Is the spider valve inside glued? what shappens when it comes time to repair replace this gasket |
| Answer: | Negative |
| Question: | My pool has a gas heater next to the filter, does this valve has heater inlet and outlet |
| Answer: | No idea. We have an older Clearwater. |
| Question: | does this valve work with the pentair pac fab fns48 de filter |
| Answer: | Yes. |
| Question: | If my filter has no back flush feature, is this the part I need to make it have one |
| Answer: | I use them on my endless pool R200. I got the part number off my original ones to compare. |
Pentair 145386 SD 80 Sand Dollar Filter 26-Inch with a 2-Inch Top Mount Valve
Product description
This SD 80 sand dollar filter with top mount valve is the perfect high performance filter. It's incredibly simple to operate and maintain and it's built with long-term reliability in mind. Plus, its highly efficient design provides all the clean, crystal clear water your pool requires year after year. Pool water is routed through the sand-filled pressure vessel. The sand traps particles so small they are undetectable to the naked eye. Overtime, dirt accumulates in the spaces between the sand particles, causing the pressure in the vessel to rise. This signals you to "backwash" the filter. Simply reverse the water flow and "knock out" the dirt. One-piece thermoplastic tank for exceptional strength, corrosion resistance and long life. Combination water and sand drain makes servicing and winterizing fast and easy. Special internal design maintains sand bed level for consistent performance and extended time between cleaning cycles. Attractive almond color blends with any outdoor decor. Measures 26-inch by 2-inch.
- This SD 80 sand dollar filter with top mount valve is the perfect high performance filter
- It's incredibly simple to operate and maintain and it's built with long-term reliability in mind
- Its highly efficient design provides all the clean, crystal clear water your pool requires year after year
- One-piece thermoplastic tank for exceptional strength, corrosion resistance and long life
- Measures 26-inch by 2-inch
User questions & answers
| Question: | would this filter be ideal for a 42,000 gallon pool |
| Answer: | Per the Spic & Span website regarding Antiviral and Antibacterial: DISINFECTION/*VIRUCIDAL/FUNGICIDAL/MOLD & MILDEW CONTROL DIRECTIONS: Spray 6 - 8 inches from surface, until surfaces are thoroughly wet. Do not breathe spray. Treated surfaces must remain wet for 10 minutes. Note to reviewer: For Influenza Virus Type A] treated surfaces must remain wet for 1 minute. Wipe dry with a clean cloth, sponge, or mop or allow to air dry. For heavily soiled areas, a preliminary cleaning is recommended. *Influenza Type A/Brazil (Influenza), Rotavirus and Escherichia coli (E. Coli)." |
| Question: | Is the drain molded or a add in seal |
| Answer: | Excellent question! I had been trying to figure out what to use on the rubber soles of my slippers to cut through the gunk. It worked amazing! Thank you! |
| Question: | The valve is |
| Answer: | I use it periodically on granite counters. Have had no problem. I actually like this product quite a bit. I would caution - but not because I've had a problem -- that you might want to use a milder product designed for granite on a regular basis and use this product when you want to make sure you disinfect (like after you cut up chicken or something) . |
| Question: | Are the valves on top, 2 inch or |
| Answer: | Yes they do. |
Pentair SD 60
Pentair
Product description
The Pentair Sand Dollar SD60 Sand Filter has a 22-1/2" tank diameter that requires 250 lbs of sand for operation used on in ground or above ground pools. The Pentair SD60 Sand Filter includes all the laterals inside the tank, filter tank base, lid closure, air relief valve, pressure gauge, and 1-1/2" Multiport Valve. The Sand Dollar SD60 has a durable fiberglass-reinforced tank with one-piece construction. This feature enhances durability and product life. The Pentair SD60, like other sand
- Valve included
- Compatible with valve 272531
- One-piece thermoplastic tank for exceptional strength, corrosion resistance, and long life.
- Combination water and sand drain makes servicing and winterizing fast and easy.
- Special internal design keeps sand bed level for consistent performance and extended time between cleaning cycles.
Pentair 272599 Top Mount Valve Label Replacement Tagelus Pool and Spa Sand Filter
Pentair
Product description
This top mount valve label is designed to use with Pentair Tagelus pool and spa sand filters models TA 30, TA 30D, TA 35, TA 35D, TA 40, TA 40D, TA 50, TA 50D, TA 60, TA 60D, TA 100, TA 100D. Measures 4-3/4-inch length by 4-3/4-inch height by 1/4-inch width.
- Brand: Pentair
- Top mount valve label replacement
- Measures 4-3/4-inch length by 4-3/4-inch height by 1/4-inch width
- Top mount valve label replacement
User questions & answers
| Question: | Will this fit 272526? SD40 Pentair Sand Dollar |
| Answer: | Does this work with Pentair Pac Fab FNS 48 DE filter? |
| Question: | Could someone please tell me the inner and outer diameter |
| Answer: | Depends on the filter. Pentair also makes a FullFlowXF back flush valve that is sweet. |
Pentair 150119 Union Replacement Kit Sta-Rite Cristal-Flo II High-Rate Pool and Spa Sand Filter, Set of 3
Product description
Pentair 150119 Union Replacement Kit Sta-Rite Cristal-Flo II High-Rate Pool and Spa Sand Filter, Set of 3
- Union kit replacement
- Fits Pentair Sta-Rite Cristal-Flo II high-rate pool and spa sand filters
- Set of 3 per pack
- Measures 8-inch length by 2-inch height by 8-inch width
User questions & answers
| Question: | I have a pentair 6way 1 1/2 valve the inside female threads are 1 1/2 npt will these thread onto the larger male threads of the valve |
| Answer: | Yes its glued. Remove old gasket AND MUST CLEAN ALL OLD GLUE OUT OF ALL GROVES! Than reglue new one back in let dry 24hr before turning equipment back on😀👍 |
| Question: | Do these fit the sand dollar sd 80 with pentair 272526 multi valve |
| Answer: | No special ports just in and out. If you have the existing setup plumbed correctly the heater receives the filtered water from the out side of the valve at the filter. There should also be a bypass inline to allow filtered water to the pool without having to go through the heater. This also allows heater maintenece without pool downtime. the bypass would allow maint, it is why it is recommended besides not having to have all water through a heater when it isnt running |
Pentair 155711 Pump to Filter Assembly Replacement Pool and Spa Sand Filter
Pentair
Product description
This pump to filter assembly is designed to use with Pentair Sand Dollar, Sta-Rite Cristal-Flo II pool and spa sand filters.
- Pump to filter assembly replacement
- Fits Pentair Sand Dollar, Sta-Rite Cristal-Flo II pool and spa sand filters
- Brand: Pentair
- Country of Origin: UNITED STATES
User questions & answers
| Question: | i have this same pump. only the hose is 38inches long. why dont you make this |
| Answer: | On the website you can find the sizing chart |
| Question: | is the nut size the same on both ends? If so, is it 2 1/2 inch |
| Answer: | I had this filter and discovered that it is huge! I did notice an area at the bottom to unscrew to drain. I didn't notice if it was molded. This is a very large sand filter. |
| Question: | Does it come with orings |
| Answer: | Yes it is a 2 ln |
| Question: | Is this hose 36 inches long |
| Answer: | I believe they are 2 inch. |
Pentair 155710 Pump to Filter Assembly Replacement Pool and Spa Sand Filter
Pentair
Product description
This pump to filter assembly is designed to use with Pentair Sand Dollar, Sta-Rite Cristal-Flo II pool and spa sand filters.
- Pump to filter assembly replacement
- Fits Pentair Sand Dollar and Sta-Rite Cristal-Flo II pool and spa sand filters
- Brand: Pentair
- Country of Origin: UNITED STATES
User questions & answers
| Question: | What is the diameter of the hose |
| Answer: | Yes. It's 1 1/2 union |
| Question: | How long is this |
| Answer: | Yes. That's what I put it on. |
| Question: | What do I get just the o rings at any Pool Store |
| Answer: | I still have my top valve. I checked it and it is the same. It will work. |
| Question: | The product spec says 29" but someone here answered 3'.... I need 3' but it's not sold on amazon that I can see... wondering if this wil work |
| Answer: | Inner is 6" and Outer is 6 5/8". |
Pentair 261185 2-Inch 6-Way Clamp Style Valve Replacement Tagelus Pool and Spa Sand Filter
Pentair
Product description
Pentair 261185 2-Inch 6-Way Clamp Style Valve Replacement Tagelus Pool and Spa Sand Filter
- Brand: Pentair
- 6-Way clamp style valve replacement
- Measures 2-Inch
- 6-Way clamp style valve replacement
User questions & answers
| Question: | My old valve has a rinse position, the image of this valve shows winterize in the same position, will this valve work with my pentair tagelus ta 100d |
| Answer: | There is no hex on the adapter it is a round screw on connector. |
| Question: | Does this come with the adaptor (part #15-4521) and o-ring valve adaptor (part |
| Answer: | Yes, mine had the O rings. |
| Question: | What Measures 2 inch |
| Answer: | Yes, the hose is 36 inches long. |
Pentair 261152 2-Inch Threaded Multiport Valve Replacement Pool and Spa D.E. Filter
Pentair
Product description
This threaded multiport valve is designed to use with Pentair FNS, FNS Plus, Nautilus Plus pool and spa D.E. filters. Measures 2-inch.
- Threaded multiport valve replacement
- Fits Pentair FNS, FNS Plus, Nautilus Plus pool and spa D.E. filters
- Measures 2-inch
User questions & answers
| Question: | Is the Pentair 261152 the same as the sm2-pp |
| Answer: | Product Dimensions 24 x 3 x 3 inches |
| Question: | Can i replace part 263064 push pull valve, 7.5 in. center? i have pentair fns plus 60 filter |
| Answer: | If u r just looking for the outings, u may b able to match them up at your local hardware store?? |
| Question: | Will this fit a nautilus 48 de filter with a push pull valve |
| Answer: | Mine is 29" but the distance from the 2 connecting ends leaves me with a bow in the center if you stretch it out it would probably reach 3' |
| Question: | We have a praher model sm-20-1 will this unit replace it? does it have all the backwash features, etc |
| Answer: | I was concerned about my hose not fitting my SD60 filter but it did. Its just long enough |
Pentair 262506 6-Way Clamp Style Valve Replacement Pool or Spa Sand Filter
Pentair
Product description
Pentair 262506 1.5" Backwash Valve For Top Mount Sand Filter is designed for maximum sand filter backwash performance and precise water flow. All top mount multiport valves are constructed of molded ABS material with heavy-duty plastic handles and are 100 percent factory tested. Universal Configuration has threads on both the inside and outside of the inlets and outlets.
Features:- Works with Top Mount Sand Filters
- Wear Resistant Rotor
- ABS Body
- Large, 1-Piece Durable Lever Handle for Trouble-Free Operation
- 6-Position Clamp, Positive-Lock Operation
- Heavy-Duty Diverter
- Special Winterizing Position
- Works with Top Mount Sand Filters
- Wear Resistant Rotor
- ABS Body
- Large, 1-Piece Durable Lever Handle for Trouble-Free Operation
- 6-Position Clamp, Positive-Lock Operation
User questions & answers
| Question: | does it fit pentex |
| Answer: | It comes with everything you see in the picture. |
| Question: | Does this include spider gasket, presure gauge and sight glass |
| Answer: | Where the plumbing hooked to the valve it takes 2 inch male adapters |
| Question: | will it fit my Tagelus TA-60/60D, it looks like what I need and mine is a 6 way |
| Answer: | 1 1/2” |
Pentair 160316 Clean & Clear Fiberglass Reinforced Polypropylene Tank Cartridge Pool Filter, 100 Square Feet, 100 GPM (Residential),Almond
Product description
Pentair 160316 Clean & Clear Fiberglass Reinforced Polypropylene Tank Cartridge Pool Filter, 100 Square Feet, 100 GPM (Residential),Almond
- Clean & Clear Plus pool and spa cartridge filter
- Integrated continuous high flow internal air relief; NSF listed and unionized connections
- Chemical resistant tank body and lock ring with spring-loaded safety latches
- Coreless cartridge for easy cleaning and single piece base and body design; 1-inch drain and wash out
- It has effective filtration area 100-square feet and flow rate is 100-GPM; available in almond color; measures 14-inch length by 34-1/2-inch height by 15-1/2-inch width
User questions & answers
| Question: | Does this come with a filter inside or do I have to buy one separately? If so, what filter do I need with model number |
| Answer: | Check out pentair 263064 on YouTube. There are videos |
| Question: | what is the intake and outlet pipe size |
| Answer: | that's what I bought mine for. It replaces the push pull valve. So much better!! |
| Question: | To seller- Can this be used for above ground 12 x 24 pool? Does it need additional parts for it to work |
| Answer: | Yes It does have the backwash features....And was an exact replacement for my PAC-FAB 48 DNS filter system....( not sure about praher model though ) |
| Question: | How many gallons is your pool and what is the HP of your motor |
| Answer: | On my valve the winterize is in between valve openings. It’s used to keep the selector off of the gasket in winter. |
Latest Reviews
View all
Yamaha Violins
- Updated: 30.01.2023
- Read reviews
Arama Two Way Radios
- Updated: 15.04.2023
- Read reviews
Upg Wheelchairs
- Updated: 01.06.2023
- Read reviews
Toughsty Ip Cameras
- Updated: 08.06.2023
- Read reviews
Bluetooth Beacons
- Updated: 11.01.2023
- Read reviews