Product description

Lanzar Model : OPTI6MI

6.5'' -inch Pro Car Audio Sub Speaker

6.5’’ Opti-Drive Car Mid-Bass Speaker - Pro Audio SVC Midbass Car Speaker (500 Watt)

Features:

High-Powered Mid-Bass Speaker

Lab Tested Pro Audio Performance

SVC: Single Voice Coil Car Sub Speaker Design

Recommended for Sealed Enclosure Speaker Box Mounting

Impressive Bass Response, Low-Resonance Frequency Output

Black Pressed Speaker Cone with Rigid Foam Surround

Quick Connect Speaker Spade Terminals

Rugged Die-Cast Aluminum Frame

Includes Custom Molded Speaker Grill, Mounting Template & Wiring

Size/Dimensions:

Mounting Depth: 3.03'' -inches

Overall Diameter: 6.97'' -inches

Technical Specs:

Power Output: 500 Watt MAX / 250 Watt RMS

1.5'' -inch High-Temp CCAR Voice Coil, TIL

Bobbin

Impedance: 4 Ohm

Frequency Response: 105Hz - 12kHz

Sensitivity: 94dB (1w/1m)

Magnet Structure: 30 oz.

Vas: 9.46 Liter

The Lanzar Opti-Drive Car Sub Speakers provide lab tested, high-powered audio performance. Mid-Bass sound drive unit provides the sub speaker with impressive bass response and low-resonance frequency output. Optimal pro audio reproduction style creates clean, high-sensitivity and distortion-free sound -- perfect for mounting in car & truck backseats and trunk panels. Speaker design features high-power output handling, SVC: single voice coil and 4 ohm impedance. The desired audio reproduction of Lanzar’s Opti-Drive Midbass series are perfect for custom car enclosure speaker box and panel mounting that allows audiophiles to fine-tune and tailor their sound via controlled installation. Create the ultimate listening experience and add pro audio sound power with the Lanzar Opti-Drive Car Mid-Bass Sub Speaker.

• 105Hz - 12 kHz FREQUENCY RESPONSE: Lanzar, 6.5” high power performance speaker has 30 oz magnet structure, vas at 9.46 liter and frequency response that complete the package. Also, pack with exceptional 94dB (1w/1m) decibel sensitivity
• POWERFUL 500 WATTs: This 6.5” full range speaker provide up to 500 watts peak power because it is equipped with 30 oz. housed structure. It's all housed in durable die-cast aluminum frames
• 4-OHM MIN IMPEDANCE: This midbass car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. Includes custom molded grill and hardware for easy setup
• CCAR VOICE COIL: Lanzar speakers are capable of 1.5” higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures
• OPTI6MI TEMPLATE: Lanzar upgraded car speaker measures 6.97'' in overall diameter with a mounting depth of 3.03''. The high-quality black paper cone accordion cloth surround with resin coated provides a strong foundation

User questions & answers

Question:	I wonder if they come good both halves or just one for the price posted
Answer:	Hi, I'm Martin and I work for Pyleaudio, parent company of Lanzar. This unit has 250 watts RMS at 4 ohm load. If you have other questions, please let me know. You can reach me at martint@pyleusa.com. Thank you for choosing Lanzar.
Question:	friend that is price per pair of Lanzar OPTI6MI Opti Pro 500 Watts 6.5" High Power Midbass Speaker (single
Answer:	The price listed is for one speaker only!!
Question:	What is the rms
Answer:	Yes by a kicker or Rockford or alpine or MTX or poke audio just be careful of what you bye make sure it’s off of Amazon prime so you can at least return it
Question:	This price is for the pair or just come one
Answer:	A Punch-1000 from Rockford fosgate can only put out 150amps at 14.4 (average) about 2,160 watts of power so technically yes they can handle it but your amp is gonna go for a workout.

Product features

High Power MidBass

The Lanzar Opti-Drive Car Sub Speakers provide high-powered audio performance. Mid-Bass sound drive unit provides the sub speaker with impressive bass response and low-resonance frequency output. Optimal pro audio reproduction style creates clean, high-sensitivity, and distortion-free sound - perfect for mounting in car & truck backseats and trunk panels.

Product description

3-Way Electronic Crossover Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channels X10 Frequency Multiplier For Front Channel Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel 18dB Per Octave Crossover Slope Variable Bass Frequency: 40Hz-120kHz Boost Level: 0-12dB Parallel Input Switch, Mixed In/Out Switch Remote Subwoofer Level Control Power On LED Indicator Dimensions: 7.5H x 7W x 1.4D

• AUDIO CROSSOVER: Lanzar Vibe 3 way electronic crossover network features hi-pass and low-pass crossover. Hi-pass crossover has 32Hz - 800 kHz frequency response for front and rear channels. Low-pass crossover has 50Hz - 160 kHz for subwoofer channel
• POWER LED INDICATOR: This indicator will light up when switching power supply is activated, and the unit is operational. Also, pack with remote subwoofer level control and parallel input switch, mixed in/out switch
• SUBWOOFER FREQUENCY CONTROL: The Vibe X6 crossover network series gives you complete control of your sound with the stereo or mono switch. The subwoofer channel between 50 hz and 160 hz is for the selection of the low-pass crossover frequency
• 12dB OCTAVE SLOPE: Your amplifier needs to be in order to make your speakers work their best. Lanzar Vibe X6 series has an exceptional 12dB per octave crossover slope to complete the package
• SIZE: Lanzar upgraded audio crossover that measures 7.5''H x 7''W x 1.4''D. The X10 frequency multiplier for front channel, 40Hz - 120 kHz variable bass frequency provides full range and control of the speakers’ performance

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

Upgrade your audio system with Lanzar's next-generation power handling and distribution amplifier technology. New for 2014, Lanzar introduces the innovative Heritage Series Bluetooth Amps that combine high-performance audio processing power with Bluetooth wireless streaming capability!. Engineered to perform and packed with versatile sound specialization, the Heritage Series Amps also feature MOSFET efficient power processing, bass boost circuitry, 2 Ohm stereo stability, bridge-ability and plenty more features to amplify and satisfy. Join the trend of Bluetooth and sound amplifying power with Lanzar Heritage (HTG) amps.

Features:

• 4 X 250W + 1 X 650W RMS @ 4 Ohms
• 4 X 350W + 1 X 1,500W RMS @ 2 Ohms
• 2 X 1,000W MAX @ 4 Ohms Bridged
• 4 X 500W + 1 X 2,000W MAX @ 4 Ohms
• Wireless Bluetooth Audio Interface
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Chrome RCA inputs
• Stereo Line Outputs for Left and Right Channel
• Low Pass Filter Controls
• LPF Freq. Response: 40Hz-250Hz
• High Pass Filter Controls
• HPF Freq. Response: 40Hz-250Hz
• Band Pass Filter Controls
• BPF Freq. Response: 40Hz-3KHz
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%
• S/N Ratio: >90dB
• Channel Separation: >65dB
• Freq. Response: 10Hz-45KHz
• Fuse: 30A X 3
• Dimensions: 19.29''(L) X 2.24''(H) X 8.81''(W)
• Sold as : 1

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 5 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• BLUETOOTH: With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device. Instantly stream your favorite tracks from your smartphone or tablet, or favorite internet radio providers like Pandora, Spotify, iHeart.

User questions & answers

Question:	Can I run a chuchero and a subwoofer
Answer:	BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all.
Question:	Can I run 2 midrange speakers and a subwoofer
Answer:	Hi, it is a class D amplifier. Thank you.
Question:	Bluetooth version? AptX features
Answer:	yes. it comes with an external microphone.
Question:	Is it monoblock? Class d? Class a? class a/b? Class b
Answer:	please select shipping from JOINLGO not amazon, then we will send the kit to you from China via DHL fast shipping. please leave order message "needs 9" screen", then we will send the kit with a 9" monitor. thanks,

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, nickel-plated RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• 2 x 500W RMS @ 4 OHMS
• 2 x 1000W Max @ 4 OHMS
• 1 x 2000W Max @ 4 OHMS Bridged
• 2 x 650W RMS @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls
• High Pass Filter Controls
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: < 0.01%.
• S/N Ratio: > 90dB
• Channel Separation: > 65dB
• Freq. Response: 10Hz~45KHz
• HPF Freq. Response: 80KHz
• LPF Freq. Response: 50Hz-250Hz
• Subwoofer Level Control
• Fuse: 40A x 1
• Dimensions: 12.99''(L) x 2.24''(H) x 8.81''(W)
• Sold as : Unit

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.

User questions & answers

Question:	Would this particular amp b ideal for 2 6.5s and 2 4x6s
Answer:	Would be more than enough, I use the 1000 watt version to run my 4 6x8's.
Question:	will this be good for 2 12 mtx termenior 400 rms
Answer:	This amp is almost 150 w rms. It is poor in power. I sold mine. In less money than the amount that I pay. Becouse it is poor.
Question:	Is this amp enough for 2 12 kicker cvr
Answer:	I highly doubt youll get 400w out of this amp let alone what it clams. I recommend an apcl15001d if you want real power for cheap. This isnt worth it
Question:	hi, i am looking an amplifier to conect 2 coaxials speakers, two tweeters and a subwoofer ¿how many channels should the amp have
Answer:	Seperate your amps for better sound comtrol the four channel will run your coaxial speaker and run your tweeters then run a mono block single sub amp

Product description

Lanzar Model : HTG888. 55000 Watt 8-Channel Mosfet Amplifier 8 X 250W RMS @ 4 Ohms8 X 350W RMS @ 2 Ohms4 X 1, 000W MAX @ 4 Ohms Bridged8 X 500W MAX @ 4 OhmsBass Boost CircuitBridgeable at 4ohms2 Ohm Stereo StableChrome RCA InputsStereo Line Outputs for Left and Right ChannelLow Pass Filter ControlsLPF Freq. Response: 40Hz-250HzHigh Pass Filter ControlsHPF Freq. Response: 40Hz-250HzBand Pass Filter ControlsBPF Freq. Response: 40Hz-3KHzPower and Protection LED IndicatorsSoft Turn-on/Turn-offTHD: S/N Ratio: 90dBChannel Separation: 65dBFreq. Response: 10Hz-45KHzFuse: 100ADimensions: 22. 83''(L) X 2. 24''(H) X 8. 81''(W)

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• INTELLIGENT DESIGN: The car audio amplifier 8 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.

User questions & answers

Question:	This Amp seems like a good deal, but the reviews are saying it craps out just after the warranty. How would I protect myself from getting scammed
Answer:	Who knows what the heck the true rating of this amp is. I did previously have a hifonics 5000 watt 5 channel amp and power does seem comparable.
Question:	this model has bluetooth
Answer:	Hi, our sincere apologies. There is no Line Output port for this model because that is supposedly for our HTG258BT model. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box HTG888 for more details. Thank you.
Question:	How can this be a 5000 watt amp with a 100 amp fuse and 4 gauge wiring . Does'nt make since
Answer:	Look at the fuses.. example two 60a fuses 1200 including voltage, may see 1300 total power RMS in good soild electrical.
Question:	Where is Line out it advertised
Answer:	yes without any problem

Product features

Lanzar Amplifier Car Audio

• 8 X 250W RMS 4 Ohms
• 8 X 350W RMS 2 Ohms
• 4 X 1,000W MAX 4 Ohms Bridged
• 8 X 500W MAX 4 Ohms
• Bass Boost Circuit, Bridgeable at 4ohms
• 2 Ohm Stereo Stable, Chrome RCA Inputs
• Stereo Line Outputs for Left and Right Channel
• Low Pass Filter Controls, LPF Freq. Response: 40Hz-250Hz
• High Pass Filter Controls, HPF Freq. Response: 40Hz-250Hz

Features:

• Band Pass Filter Controls
• BPF Freq. Response: 40Hz-3KHz
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%
• S/N Ratio: >90dB
• Channel Separation: >65dB
• Freq. Response: 10Hz-45KHz
• Fuse: 100A
• Dimensions: 22.83''(L) X 2.24''(H) X 8.81''(W)

Product description

Lanzar Model : HTG157

3000 Watt 2 Ohm Stable Mono Block Mosfet Amplifier

1 x 650W RMS @ 4 OHMS

1 x 1250W Peak @ 4OHMS

1 x 1500W RMS @ 2 OHMS

1 x 3000W Max @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

2 Ohm Stable

Nickel RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Freq. Response:10Hz~45KHz

LPF Freq. Response: 50Hz-250Hz

HPF Freq Response:80HZ

Fuse: 40A x1

Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp
• GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels

User questions & answers

Question:	Can I use this for my
Answer:	Yes, 2 fuse
Question:	Will this push 2 12" kicker comp r at 2 ohm
Answer:	Bought it a year ago and it sat in my closet. Never opened and went to install it. It didnt work. This is crap
Question:	do it have any fuse
Answer:	Yes
Question:	i have no sound.how do you get it to work
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio

• 1 x 650W RMS @ 4 OHMS
• 1 x 1250W Peak @ 4OHMS
• 1 x 1500W RMS @ 2 OHMS
• 1 x 3000W Max @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• 2 Ohm Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls

• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%.
• S/N Ratio: >90dB
• Freq. Response:10Hz~45KHz
• LPF Freq. Response: 50Hz-250Hz
• HPF Freq Response:80HZ
• Fuse: 40A x1

Product description

Lanzar Model : VCT2610

6000 Watt 2 Channel High Power MOSFET Amplifier

3000W x 2 Output at 4 Ohms

6000W x 1 Bridged Output at 2 Ohms2 Ohm Stable

MOSFET Power Supply

Variable Hi-Pass : 40 Hz-250 Hz

Variable Low-Pass : 40 Hz-250 Hz

Variable Input Level (Gain) Control : 6V-200mV

Variable Bass Boost : 0-18dB

Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave

Sub Sonic Switch

Thermal / Overload / Short Circuit Protection

Soft Turn On/Off

Power & Protection LED Indicator

Low Level RCA Input : 10K Ohms

Line Level RCA Output

Frequency Response : 15 Hz-30K Hz

Signal to Noise Ratio: >95dB

THD:0.1 %

2x60 Amp Maxi Type Fuse

Slim Size Amplifier Design For Easy Installation

Dimensions: 10.63''W x1.78''H x 21.97''L

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63''W x1.78''H x 21.97''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	What wattage do these actually do
Answer:	4 ga is the biggest to fit, the amp has the crummy tab plates and is NOT 1 ohm stable. 4 15's will kill this amp
Question:	Will this amp run 2 1200 watt (10”) audiobahn downfire subs
Answer:	This amp over heats to much. Get yourself a class D amp
Question:	What wire gauge for this amp i pushin
Answer:	Hi, you may use a 6.5 sub or speaker as long as it is a below the wattage of this amp ( 3000 watts) at 2 to 8 ohms.
Question:	Can this amp power 2 12-inch Power Acoustik 2500W subwoofers
Answer:	I wouldn't recommend it because the app doesn't like to put out its peak power or even when measured it gave about 3000 Watts peak and when that's converted into RMS it's approximately 1767w rms add two speakers I have a peak of 1200 watts and RMS of about 1696.8w you'll be pushing max power transfer. Which is good unless your subs are rated more then that. What ever peek is x .707 gives you RMS so take that and work it in

Product features

2-Channel High Power MOSFET Amplifier

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service.

• 3000W x 2 Output at 4 Ohms, 6000W x 1 Bridged Output at 2 Ohms 2 Ohm Stable
• MOSFET Power Supply, Variable Hi-Pass : 40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz, Variable Input Level (Gain) Control : 6V-200mV
• Variable Bass Boost : 0-18dB, Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave
• Sub Sonic Switch, Thermal / Overload / Short Circuit Protection, Power & Protection LED Indicator, Low Level RCA Input : 10K Ohms
• Line Level RCA Output, Frequency Response : 15 Hz-30K Hz
• Signal to Noise Ratio: >95dB, THD:0.1 %
• 2x60 Amp Maxi Type Fuse, Slim Size Amplifier Design For Easy Installation

Product description

6 5'' High Power Subwoofer Non-Press paper Cone Specially Treated Foam Edge Suspension 1 5'' High-Temperature Aluminum Voice Coil Magnet Weight 40 Oz Impedance 4 Ohm Fs 80Hz Qms 4 05 Qes 1 3 Qts 1 2 SPL 87(dB) Vas 6 8(Cuft) Mounting Depth 3" Rubber magnet Boot Cover Sold as Unit Weight 3 87 lbs

From the Manufacturer

• 600 WATT POWER This car subwoofer has 600 Watt peak power that will produce high sound resonance It also has a frequency of 80Hz and 4 Ohm impedance
• FOAM EDGE SUSPENSION Made with a specially treated foam edge suspension to keep equipment safe Designed with bumped and vented motor structure for durability and easy installation
• NON-PRESSED PAPER CONE It is a clean-cut car subwoofer that boasts a black non-pressed paper cone It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time
• ALUMINUM VOICE COIL The speaker subwoofer comes with a 1 5” high-temperature aluminum voice coil to resist corrosion It has a sensitivity of 87dB and a special designed rubber magnet boot
• 3” MOUNTING DEPTH Easy to install with its 3” mounting depth and fits most audio system for cars boats or RVs Included are the necessary cables installation template and manual

User questions & answers

Question:	Should an amp be installed with these or would a factory amp suffice? 2000 gmc yukon xl
Answer:	Hi, the sub has 300 RMS. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box MAXP64 for more details. Thank you.
Question:	the price is 2 pieces
Answer:	Yes, mine are installed in a low space box inverted and sound better then when mounted in the box. If mounted without a box they should work as well without any issue
Question:	Whats the RMS watts of these subs
Answer:	Had the same speakers and the didn't last a week and I had 3 of them and they blew out so if I was u look for another brand..... (junk)
Question:	Will this sub work in a free air installation
Answer:	if you have a fosgate p1000,you should consider a subwoofer from an equally good manufacturer. you could get 1 soundqubed hds3 12'' 2ohm dual voice coil sub that would make your brain jiggle like jello.like, these lanzars dont even have the RMS watts listed on the product spec sheet. Thats terrible business ethics and have probably caused many unaware customers to blow their subs within days of plugging them in.