10 best tire valve extension

Product description

Brass valve extensions have a dust cover design which allows pressure check and inflation/deflation without removing cap. Threaded for valve caps and/or wheel cover locks. Tire valve extensions measure at 3/4" effective length and have a thread size of .

• 3/4" total effective length
• Thread size of .305-32
• Simply thread valve extension onto existing valve core
• Made in USA

User questions & answers

Question:	How many comes in package? I assume the 4/card means 4 each
Answer:	These extenders do not work with TST tire monitoring system 507 with the sensor with air flows through sensors. Only screw on about 2 threads and stops this is not satisfactory your monitor caps will fall off . Either sensors have different threads or extenders do .
Question:	What is the real answer is this made in us or china (see below conflicting answers
Answer:	First, these extensions are GREAT. Very durable in construction. Be careful though as they can loosen and fall off but not often. I've been using these for 4-5 years and lost only one. I do check them often for tightness. I'm not sure on exactly what your asking so I'll do my best to explain on what I use them for. These only extend the length of the tire valve. For me, they extend the tire valve past the hub cap so I can fill/check the tire pressure without any prying or digging or having to remove the hub cap. The way you use them is you screw off the little plastic valve cap then screw this on (strong finger tight) then screw the plastic cap, you removed from the existing tire valve, onto the valve extension. The valve extension has a plunger inside that pushes into the below tire valve to release or add the compressed air. Seals back tight once the pressure force is removed. In summary, your new longer tire valve functions exactly the same as when it was shorter. You can check the tire pressure and add air to the tire as you did before. If you need a longer tire valve then buy these. You won't be disappointed. I hope this helps. Happy 2017 New Year
Question:	Can this milton s-441 3/4 in valve extension be used to attache an external tpms
Answer:	Yes, the Work Sharp Culinary E5 Kitchen Knife Sharpener does come with the ceramic honing rod. It is a complete sharpening solution.
Question:	Can you screw an air compressor or air pressure gauge on these extensions
Answer:	I do not know anything about the ken onion edition you mentioned, but the Work Sharp E5 Kitchen Knife Sharpener is the best knife sharpener I have had. I used the Chef's Choice (triple phase) for years, and it never quite got my knives as sharp as I wanted. This one does. I think it is the combination of the sharpening angle (17 degrees and you can buy an add on that take knives to 15 degrees if you prefer) and the ceramic honing tool. It brought my older knives back to a great blade for use in the kitchen. Honing them once a week keeps them sharp. I am in the kitchen and cook a lot, and sharp knives are very important to me.

Product description

'Four Hose Kit, Automotive and Light-Duty Trucks, Used For Air Inflation, For Use With Most Dual Wheels with Lug Nut Hex of 1 1/16 In. and Smaller, Includes Brackets for Most Dual Wheels with Lug Nut Hex of 1 1/16 In. and Smaller'

• Air Max braided stainless valve stem extensions for inner and outer rear wheels.
• Air Max extensions mount using Phoenix USA Inc. DOT Liner hardware.
• Outer has 120 degree bend.
• Kit includes 4 brackets, 2 inner extensions, and 2 outer extensions.

User questions & answers

Question:	Do you have extenders kits of 2 with the 135° ends and the 7" hose for dually
Answer:	Yes, they are stamped Stainless Steel.
Question:	Will they fit onto lt225/75r16 on a class c rv
Answer:	I spoke with someone else at the factory this morning and apparently there is a kit. Prt # AP6. The hoses are 7.75" long. The price is $32.10. Shipping would be $12.00 because it would ship direct from the factory and they charge a minimum of $12.00.
Question:	Are the brackets stainless steel too
Answer:	4 in the package I recently ordered.
Question:	I only need 2- 7" hoses plus I need the bracket to hold them in place do they have a kit with this setup
Answer:	Both sides of the cardboard package say, 'MADE IN USA' and to confirm, the part is stamped with, 'CHICAGO 60630'.

Product description

Double Seal High Pressure Inflate through Valve cap designed for heavy duty and high efficiency use. Gauge and inflate valve extensions directly through the cap. Replaces any standard valve stem cap as well as Alligator V2B and Haltec DS-1.

• (Set of FOUR caps) Muzzys Inflate Through High Pressure Valve Stem Caps
• Made in the USA! Commonly used for Commercial trucks, RV's, Trailers and Semi's but can used on anything with a valve stem.
• Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails.
• Double Seal High Pressure Inflate through Valve cap designed for heavy duty and high efficiency use. Gauge and inflate valve extensions directly through the cap.
• Replaces any standard valve stem cap as well as Alligator V2B and Haltec DS-1.

User questions & answers

Question:	what are the dimensions of these stems
Answer:	You get a utility track adapter kit that comes with the cover
Question:	how long are these
Answer:	I have the vinyl leather grain and I absolutely love it! I didn’t have the choice of the canvas, so didn’t have to make a decision about it. I did have my bike in the back and the handle bar wanted to poke through, so maybe the canvas wouldn’t do that or it would have less of a chance to.
Question:	What is the over all length
Answer:	Yes. This product comes with brackets that slide into the rail system on a Tacoma.

Product description

Brass valve extensions have a dust cover design which allows pressure check and inflation/deflation without removing cap. Threaded for valve caps and/or wheel cover locks. Tire valve extensions measure at 1 1/4" effective length and have a thread size of .

• 1 1/4" total effective length
• Thread size of .305-32
• Simply thread valve extension onto existing valve core
• Made in USA

User questions & answers

Question:	What is the outside diameter of the cylindrical part
Answer:	A Dill valve is a Dill valve is a Dill valve. If yours works, so will this.
Question:	Can you use these with rubber valve stems
Answer:	china
Question:	Will this work up to 170 psi? Need extension to inflate air shock on bike. Others show 60psi limit. Is this rated to higher pressure
Answer:	I had a problem with these also...….it's not your air chuck on the compressor hose....it's the little washer on the extension that seals between the extension and the original Schrader valve. Return them and get a different brand.
Question:	Where are these made
Answer:	Not designed to be stacked.
Question:	I purchaaed a viair air compessor and the inflation end of the hose will not depress the center of the valve because it is to big. Any ideas
Answer:	1.25" long - worked for me - used to put nitrogen in my kia 2010 vehicle - used them just for filling
Question:	Can these be stacked? in other words if I need a 2" extension can I screw two of these together and still inflate a tire
Answer:	Yes, I purchased about 1 year ago and they are schrader valves.
Question:	how long is this
Answer:	Ford dually 19".5 550
Question:	Is this a Schrader valve
Answer:	It will fit if you are using Phoenix wheel simulators. It will probably fit if you have something else, but we can't guarantee it because we have no way of checking.

Product features

Slime 2045-A Metal Valve Extenders

Description:

Sometimes, getting to your tire valve stems is just too hard. They could be recessed into the wheel well, covered in gunk, or simply too tough to get to. That's why Slime came up with tire valve extenders!. These solid metal tire valve extenders are 1.25" long and easily screw onto your tire valves, making things far more accessible for inflation and of course, filling with Slime sealant!

• 4) metal tire valve extenders
• Length: 1.25"
• Solid metal construction
• Perfect for hard to reach valve stems

Product description

Pacific Dualies Valve Stem

• Made of nickle plated brass, with swivel base
• Made for Trucks, RV's, and Trailers
• Does not fit all motorcyle wheels or bicycles
• Install on top of steel valve stems only. Not for use with rubber valve stems
• This product does not replace OEM valve stems
• Note: Please refer safety information to prevent incorrect use.

User questions & answers

Question:	How tight do you make them.and do they move when checking pressure
Answer:	They did work on my Forest River FR3 (which has an F53 dually chassis. I got them because the simulators (chrome wheel covers) holes would not allow me to put an air chuck on them. The inner dually wheels on the rear axle came with extensions for the inner tires. Only used this product on the outside rear tires and the front wheels. they are great.
Question:	How tight do you make them.and do they move when checking pressure
Answer:	As long as you have standard tire stems I can't imagine why they wouldn't. I used mine on my RV which uses a Ford E450 chassis including the duallies in the back
Question:	will these work on a Ford f53 dually
Answer:	O.D. = 1cm
Question:	can this fit a 94 ford E350 dually
Answer:	Yes, but beware that they will leak. So IMHO they are junk, stay away

Product description

Pacific Dualies Valve Stem

• Made of nickle plated brass, with swivel base
• Made for Trucks, RV's, and Trailers
• Does not fit all motorcyle wheels or bicycles
• Install on top of steel valve stems only. Not for use with rubber valve stems
• This product does not replace OEM valve stems

User questions & answers

Question:	Is it necessary to have the tire re-balanced after installation
Answer:	No. But it does have an o-ring, so finger tightening is sufficient.
Question:	is the item durable
Answer:	I used these on my 36 ft motorhome, Rubber valve stems, I did not remove them and had no problems.
Question:	can you tell me if the female end of these 180 degree valve extenders have a nut to use a wrench on to tighten
Answer:	I have a valve extension for both with a stainless steel wire as a bracket because nothing moves and I can both mature air check or fill
Question:	Do I need steel valve stems if I remove them before driving
Answer:	I make them very tight so they are air tight and do not move when checking pressure.

Product description

Pacific Dualies Valve Stem

• Made of nickle plated brass, with swivel base
• Made for Trucks, RV's, and Trailers
• Does not fit all motorcyle wheels or bicycles
• Install on top of steel valve stems only. Not for use with rubber valve stems
• This product does not replace OEM valve stems

User questions & answers

Question:	it appears to be package dimensions quoted .. what is actual valve length overall
Answer:	You do not want to remove your original valve, this is an extender, you remove the protective cap, screw this adapter to the old valve stem, and replace the protective cap. You may loose a little pressure when you do this, as it opens the inside valve before you are finished tightening the adapter. It would not hurt to verify your correct pressure after they are installed. They must be tightened snugly as they are flying around at tire speed.
Question:	is the valve stem extension , pacific dualies part no. 18099, compatable with a "TST model no. 507se" tire monitoring system
Answer:	No. Just install and check/adjust tire pressure.
Question:	Do you have to remove valves to install
Answer:	They seem to be holding up just fine. We installed them on our 30' RV and have put over 2500 miles on them and they still work fine. Our RV is under a partial cover, so not exposed to the elements continuously.

Product description

Milton 440 - Truck Valve Extension 1-3/8". Nickel plated brass, long skirt, hi-heat cap, thread size:.305-32. Truck valve extension, For use with trucks or buses to extend existing tire valve. 1 3/8" effective length, Thread size.305-32, Hi-heat cap, Nickel plated Brass.

• Nickel plated brass, long skirt, hi-heat cap, thread size:.305-32
• Truck valve extension, For use with trucks or buses to extend existing tire valve
• 1 3/8" effective length, Thread size.305-32, Hi-heat cap, Nickel plated Brass
• Nickel plated brass, long skirt, hi-heat cap, thread size: .305-32
• Truck valve extension, For use with trucks or buses to extend existing tire valve
• 1 3/8" effective length, Thread size .305-32, Hi-heat cap, Nickel plated Brass

Product description

Pacific Dualies MAX EZ air braided valve stem extension kits come with 2-braided stainless steel hoses and EZ stainless steel wire spring mounting clips; ideal use for RVs, Motorhomes, trailers, campers, and dually trucks with hard to access dual inner wheels. All of Pacific Dualies braided hoses are 100 percent manufactured in the United States and as always are backed by Pacific Dualies limited lifetime warranty.

• Not Made For Aluminum Wheels
• Designed to fit 16" E350 / E450 Ford only, with or without wheel simulators
• All hardware included with detailed instructions
• Do not install this product on top of rubber valve stems. Use with steel valve stems only
• Easy Do It Yourself Installation

User questions & answers

Question:	Can these be used on tires that take up to 120 lbs pressure
Answer:	It's been a few years but I believe they where solid. You have to turn the entire hose to screw them onto your valve stems. Then you have a little spring clip to hold them onto your rim. I did'nt use them too cheesy I used the metal bolt on clips I had.
Question:	Do these replace the existing valve stem or connect to it
Answer:	The overall length is 7" they worked great for my application which was a Ford E350 motor home. Just enough hose and the metal clips to hold them on your rims. You have to do a serch for your vehicle remember so the right part number comes up
Question:	Is the end that screws onto the valve stem stationary (solid) or do they turn? Want to screw on to add air only so want solid ends
Answer:	Vehicle is in storage & not available - Try asking the manufacturer or distributor.
Question:	Is the length from the bottom to the top of the extension actually
Answer:	I bought them to use with a TPMS and have had no problems. They should be fine.

• 250mm/9.84inch
• The lugnut is flat (Flange)
• The bracket fastens under the lug nut
• Easy installation
• One year limited warranty

User questions & answers

Question:	will they fit a 2017 F350 DRW
Answer:	Have not seen the bracket sold separately.
Question:	will they fit a 2017 F350 DRW
Answer:	The extension will fit any valve stem however you are most likely asking about the "L" bracket. The bracket is a taper or flat with a 15/16 hole for mounting on the lug.
Question:	where can i buy just the bracket
Answer:	I don't know for sure, my tires are at 70 psi
Question:	Will it fit a 2012 Mercedes Sprinter
Answer:	They connect to the existing stem. But you should not use them with a rubber stem unless you anchor the air valve part to a wheel nut.