12 best co2 regulator grows

• DURABLE MATERIAL: Long-lasting durable brass components that will function for many years without rusting
• SPECIFICATIONS: 1.58" high pressure gauge: 0-4000 PSI. Flowmeter: 0-15 scfh. Inlet connection: cga-320
• APPLICATION: Perfect for indoor grow rooms, grow tents, green houses, and hydroponics to enhance the amount of carbon dioxide to the growing environment and speed up growth rates and yields by up to 40%.
• COMPONENTS :A precision regulator, flow gauge, and industrial solenoid valve, 5 meters free plastic dispensing tubing and USA standard 3-prong plug (Hose tail suit for 4.2 mm inside diameter hose. )
• MULTIPLE OPTIONS: This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth

User questions & answers

Question:	I set the flow that 7 for my indoor veggies. the 20 lb co2 tank was empty after 36 hours. is this normal
Answer:	Return it. I got 2 defective units back to back.
Question:	How do you read the chart? It seems backwards. For example if you need 1 cfph set flow meter to 7, but if you need 5 cfph set the flow meter to
Answer:	Mine looks the same.
Question:	Do these units act as a back flow preventive device
Answer:	Oval-shaped w temp display in front
Question:	How do i adjust the co2 flow. The ball goes all the way to the top when my controller opens the solenoid. I did not get a operation manual with the co
Answer:	The thermostat on my heater is very sensitive too. I just set it a bit lower than I need and it usually stays where I want it. It has to do with the outside temp of the tank.

Product features

VIVOSUN Hydroponics CO2 Regulator

This VIVOSUN CO2 regulator can be specially used in grow rooms, grow tents, green houses, aquariums, and other places. CO2 is essential to photosynthesis and is often the most overlooked element limiting plant growing. Growing plants with hydroponics requires up to 5 times the amount of CO2 than naturally occurs in the air. Fertilizing the air with CO2 will shorten your growing time and double your harvest yield if done correctly.

Parameters:

Flowmeter: 0-15 scfh

Inlet connection: cga-320

Plastic Tubing: 5 Meters

Hose tail: suit for 4.2 mm inside diameter hose

Solenoid valve

1.58" high pressure gauge

Volts: 110 Volts

USA standard plug

Pressure Gauge

Measure the amount of CO2 being pushed through your system

Easy to Control

Turn the CO2 tank valve to "OFF" when attaching or detaching the CO2 regulator

High-Quality Solenoid Valve

Attach your hose here and thread it throughout your system

• ✔ HIGH QUALITY : CO2 regulator made from precision instruments, Note : This is not for Aquarium CO2. We have one for CO2 aquarium
• ✔ BRASS CONSTRUCTION : for long-lasting dependability and durability and combines a precision regulator, flow gauge, and industrial solenoid valve
• ✔ DESIGNED FOR : indoor gardening, grow rooms and green houses to enhance carbon dioxide to the growing environment. will allow you to maintain ideal CO2 levels for optimum growth.
• ✔ INCREASE METABOLIC RATE : Speeding up growth rates and yields by up to 40%
• ✔ VOLTS : 110 Volts Standard U.S.A electric power : PLASTIC TUBING : 5 Meter Long

User questions & answers

Question:	Is this compatible with titan
Answer:	It weighs about 18 ounces.
Question:	How.long is the power cord
Answer:	No, only fits one. Still a great little case though.
Question:	is it made in USA
Answer:	Hello, Out of the box you will be good for the standard 32% and 36% mixes, but not higher than 40%. Hope this helps, Happy Diving, Instructor Bill OnlineScuba 1 866 728 2293
Question:	Does the tubing have multiple holes in it to dispense the CO
Answer:	Hi, Thanks for your question., It is a yoke. Thanks Onlinescuba 866-728-2293

Product features

MANATEE Hydroponics (CO2) Carbon Dioxide Regulator Emitter System. The Solution for Plant Growth Stimulation.

• Are you looking for Carbon Dioxide Regulator?
• Have a grow room or a growing environment or indoor gardening?
• Want ti have a bigger yields, faster growth or produce bigger plants and enhance your yields?

Our MANATEE CO2 Regulator is the answer.

Why use CO2 :

• To sustain the rate of the plant growth.
• To increase the rate of the plant growth.
• To eliminate pests such as whiteflies and spider mites because at very high concentrations carbon dioxide is toxic to animal life.
• To substantially increase yields.

Plants can use up to 5x more CO2 than naturally occurs in air. CO2 is essential to photosynthesis and is often the most overlooked element limiting the plant growth. Fertilizing air with CO2 can shorten growing time and double your harvest.

SPECIFICATIONS

• Main Power Voltage : 110 Volts
• Temperature COntrol Range : 50 - 115
• Humidity Control Range : 20 - 80% with 5% differential
• Relay Operating Life : 100,000 Electrical
• Maximum Amperage : 15 amps
• Temperature Operating Range : 32 - 120
• Humidity Operating Range : O - 99%
• Feet : 10 feet of 1/4" Airline
• 0 - 4000 PSI Gauge
• The precision flow-gauge can release between 1/2 and 15 SCFH of CO2 per hours (Standard Cubic Feet per house) allow you to maintain ideal CO2 levels for optimum growth.

High Quality

CO2 regulator made from precision instruments. Made from 100% solid brass. For long-lasting dependability and combines a precision regulator, flow gauge and industrial solenoid valve.

Designed FOR

Indoor gardening, grow rooms and green houses to enhance carbon dioxide to the growing environment. It will allow you to maintain ideal CO2 levels for optimum growth.

Fits USA Standard CO2 Tank

The MANATEE CO2 regulator used in this application contains a solenoid (electronic) which allows it to be triggered by programmable electronic timers or controllers. That means you can set your CO2 output to occur steadily over the course of the light hours, then shut off during the dark ones. This way, you can maximum your plant's exposure to CO2 and minimize the waste.

Product description

Items specifics: Connects directly to 20# or 50# CO2 Tank 110V AC with 6' grounded cord 10' of 1/4" airline 0 to 4000PSI Gauge The precision flow-gauge can release between 1/2 and 15 SCFH of CO 2 per hour (Standard Cubic Feet per Hour)

• High quality CO2 regulator made from precision instruments. Designed for grow rooms and green houses to enhance CO2 to the growing environment. Combines a precision regulator, flow gauge, and industrial solenoid valve
• Complete with 6 foot power cable and 10 foot of 1/4 inch air line
• Increases the plants metabolic rate; speeding up growth rates and yields by up to 40%
• Use with a timer or 120V environmental control devices
• A must for optimum plant production in high light intensity gardens.

User questions & answers

Question:	Does it have a bubble counter? How does it work
Answer:	Sure, it will fit on any picatinny or weaver rail.
Question:	Does this come with a CO2 safe hose and if so how long is it
Answer:	Mount the optic over or just behind the ejection port!
Question:	What 2 or 3 way splitter would work with this to go to 2 different fish tanks
Answer:	There is a power switch that controls the brightness and you can turn it off by turning the knob to level "0".
Question:	Can this be plugged into an outlet timer to regulate when CO2 flow is on/off
Answer:	Yes, it can compatible with iron sights.

Product description

The Carbon Accelerator CO2 Regulator has all the features ever hydroponics grower needs including flow rate modulation, pressure gauge, 6' power cord, and easy to follow instructions. Whether you're connecting it to a simple timer or a more sophisticated CO2 PPM meter, the Carbon Accelerator CO2 Regulator will increase your plants yields by 15-30% when used properly. CO2 Regulator w/ Flow Meter - REG-1 features an accurate, easy to adjust CO2 flow meter that supports from 0.5 to 15 cubic feet per hour, a pre-set regulator that never needs adjusting, and an electronic solenoid valve. Each CO2 regulator also comes with a tank pressure gauge, an easy to read flow meter, and a 6′ foot power cord. This regulator also works with any 120V device for easy installation. Once the CO2 regulator is installed, simply add the tubing needed to disperse the CO2 evenly throughout your room by attaching the tubing to the back of an oscillating fan for even dispersion. If you are using this without a digital CO2 controller, you will need to use a timer. This regulator is backed by a 3-year full exchange warranty as well. This CO2 Regulator NOT UL Listed and CE Approved. Flow Rate Range: 0.5 to 15 Square Feet Per Hour.

• ✓ VERSATILE - Indoor growing, brewing, hydroponic setups, and more. Connects perfectly to standard 20lb and 50lb CO2 tanks, among others.
• ✓ ALLOW YOUR PLANTS TO THRIVE - For indoor gardeners, using a CO2 regulator can increase your yields by 15-30% when used properly. Recommended PPM 1000-1500. Only emit carbon dioxide (CO2) while lights are on.
• ✓ EVERYTHING YOU NEED - Two plastic tank washers, 15' of CO2 dispensing tubing, high quality oil-less pressure gauge, heavy duty solenoid valve (120v), flow meter (0.5 - 15 SCF/hour), detailed instructions with chart showing how how to calculate your CO2 concentration in your room with a simple timer.
• ✓ SIMPLE INSTALLATION - Screw the thread into your CO2 tank with one of the white washers supplied. Adjust the flow adjustment knob to your desired setting. Then plug in the 120v power cord into your CO2 monitor or timer. Lastly open the CO2 tank by rotating the valve 2 or 3 rotations.
• ✓ BUILT TO LAST - We believe in the quality of our products and include a 1-Year Warranty on all parts

Product description

Items specifics: Connects directly to 20# or 50# CO2 Tank 110V AC with 6' grounded cord 10' of 1/4" airline 0 to 4000PSI Gauge The precision flow-gauge can release between 1/2 and 15 SCFH of CO 2 per hour (Standard Cubic Feet per Hour)

• High quality CO2 regulator made from precision instruments. Designed for grow rooms and green houses to enhance CO2 to the growing environment. Combines a precision regulator, flow gauge, and industrial solenoid valve
• Complete with 6 foot power cable and 10 foot of 1/4 inch air line
• Increases the plants metabolic rate; speeding up growth rates and yields by up to 40%
• Use with a timer or 120V environmental control devices
• A must for optimum plant production in high light intensity gardens.

Product description

Our Gro1 CO2 Regulator is the perfect tool to help you control and maintain your optimum CO2 levels for your plants. It has an easy-to-adjust flow meter (adjustable to 0.5 - 15 cubit feet per hour), a pre-set regulator, and a solenoid valve. Easily attach the included tubing to a fan for even CO2 distribution throughout your grow room. Includes a 6 ft long 120V power cord, 5 meters of 1/4” black tubing, and 2 white washers. Case quantity is 8.



Download user's manual here

• 2 Plastic White Washers
• 6 FT Long 13-prong Grounded Power Cord and Plug to 120V.60hz Household Outlet
• 5 Meter Long Black 1/4" Tubing
• Solenoid Valve
• Pressure Gauge, Brass Alloy Body, Tank Pressure Gauge

User questions & answers

Question:	I know this isn’t a question about the product shown but i need to know what equipment to buy to defuse the co2 over the plants once i get it there
Answer:	I built a square tubing (Halo) rack from 1/2 in electrical conduit I bought and cut with a hack saw and using fittings I also bought at Home depot and made the dimensions of the halo so it was 1 foot shorter and 1 ft less width than the area of my grow area. I hung the halo up high over my grow area with hooks and light chain I also obtained at home depot. I ran the non perforated tube (Delivery tube)that came with the CO2 system to the halo. I bought a 20 meter length of 1/4 in perforated tubing and Tee'd it onto the end of the non perforated delivery tube with a brass splice piece also bought at Home depot. This way the Delivery tube goes into the perforated tube at both ends of the perforated tube. Cut to length and secured the perforated tube to the metal Halo rack with tie wraps. I used S hooks on my chain for hanging the halo so it could be adjusted up or down easily but a couple feet minimum above the tops of your plants will work fine. If this link allowed pictures I would share that with you but it doesn't. Good luck.
Question:	Does this regulator show how much Co2 is left in the tank (shows Co2 tank levels
Answer:	No. It shows tank pressure. CO2 tank pressure runs around 750 to 800 PSI. That pressure is the same for a full tank or an almost empty tank. Disregard if you already know this but you'll need to minimize exhaust fan effects from your grow room. Keep fan inlets up high. CO2 is heavy and drops down but a powerful exhaust fan can still pull it out. Also go very light or easy on your CO2 adjustments. If you're CO2 seems to be flowing alot, dial it down a bit.The CO2 monitor should be read upon very first entry into the grow room after being closed and out of it for a good amount of time for most accurate actual reading of your rooms CO2 levels too. It will rise or drop irratically shortly after your entry into the room. If the CO2 flow starts to run on while your working in the room shut it off while working in the room and turn it back on as you prepare to leave for some time. These are things I've learned about using CO2. It is also a long process before you see actual results from the CO2. A good sampling is to grow a strain from start to finish without CO2 and then the next grow with the same strain seeds with CO2 and observe your final yield. Have your nutrient and trimming procedure down pat too and keep all activities like that equal in the 2 comparison grows to see what value CO2 actually does for you. Good luck.
Question:	Will this thread onto my nitrogen tank
Answer:	Works on my regular tanks . I think this one is better quality than the titan series regulators I have.
Question:	How fine can the needle valve be adjusted for flow control? My application would be a planted aquarium where small incremental adjustments are key
Answer:	you can turn it to increase and decrease the co2 as much as you like...this item would work great for you...I've been using mine for 2 years now with not one problem....I would recommend it

Product description

Specifications:

Color: Golden

Material：Brass

Pressure Range：0-28000kpa/0-4000psi

Connection：CGA320

Hose Length：5m

Package Included: Just like the picture

Condition: Brand New

• Pressure Range：0-28000kpa/0-4000psi
• Material：Brass
• Connection：CGA320
• Hose Length：5m

• Made, Inspected & Approved by MOD Complete Manufacturing and As Always Designed & Assembled in The USA.
• HIGH QUALITY: CO2 Regulator Made From Precision Instruments.
• BRASS CONSTRUCTION: For Long-Lasting Dependability & Durability Which Combines a Precision Regulator, Flow Gauge, and An Industrial Solenoid Valve.
• DESIGNED FOR: Indoor Gardening, Grow Rooms & Green Houses to enhance carbon dioxide to the growing environment. Will Allow You to Maintain Ideal CO2 Levels for Optimum Growth.
• INCREASE THE PLANT METABOLIC RATE: Speeding up growth rates and yields by up to 40% VOLTS : 110 Volts Standard U.S.A electric power : PLASTIC TUBING : 5 Meter Long

User questions & answers

Question:	i have 2 o rings one red and one clear both or allmost same size both will fit inside brass fitting only see one place to put one o ring which one go
Answer:	SET THE BIG KNOB TO ABOUT 45PSI ON THE WORKING PRESSURE GAUGE, THEN USE THE SIDE KNOB TO ADJUST YOUR BUBBLE COUNTER. LOTS OF YOUTUBE VIDEOS ON SET UP. THEY ARE ALL PRETTY MUCH THE SAME.
Question:	What is the slowest rate of bps? i have a 30, 40, 50, and a 150 gallon aquariums. i am wanting to set them all up with co2 for aquatic plants
Answer:	Please message me With your order# I Will send you part replacement
Question:	What are the dimensions of pockets? What size book can fit
Answer:	i believe it may require an adapter, but those are readily available, even at your local home improvement store.
Question:	Will this regulator fit a nitrogen tank
Answer:	Mini is single stage, 1 spring in regulater to reducing the output pressure, And output pressure not adjustable. Dual stage piece have 2 set spring in regulater, 1 used for output pressure adjustment.

Product features

ALL THE GROWTH NONE OF THE SHRINKAGE

• DESIGNED FOR: Indoor Gardening, Grow Rooms & Green Houses to Enhance Carbon Levels for Optimum Growth.
• INCREASE THE PLANT METABOLIC RATE: Speeds up Growth Rates and Yields By Up To 40% By Using The MDC99003 To Enhance Carbon Dioxide To The Growing Environment.
• Your New MOD Complete CO2 Regulator Will Allow You to Maintain Ideal CO2 Levels for Optimum Growth.
• UNLIKE OTHERS That Require a Lengthy Setup, And Require an ElectricIan For Installation, THE MOD Complete CO2 Regulator & Valve Uses a Normal Electrical Socket at 110 Volts Standard U.S.A Electric Power. Just Plug Into a Normal Socket And Your On Line.
• INCLUDES: Extended 10 FT Long, Durable, Plastic Tubing. Compare Our Item To Similar, Yet Subpar, CO2 Regulator & Valve And I Am Sure You’ll Be Back After A Heart-Felt Disappointment. Our Item Is Simply Superior.

SOLID BRASS CONSTRUCTION

• SOLID BRASS CONSTRUCTION: For Long-Lasting Dependability & Durability
• Combines a Precision Regulator, Flow Gauge, and an Industrial Solenoid Valve.
• The Absolute Best Threading of All CO2 Regulators.
• WE LIKE TO KEEP THINGS SIMPLE. LET THE REVIEWS SPEAK FOR THEMSELVES.

Product description

Control eight lights from one time-clock or controller device. Power is wired directly into the eight-outlet timer box and all of the outlets are controlled by one 120V trigger cable. Rated for 50 amps at 120/240 volts. The trigger cable can be plugged into a standard 24-hour timer or environmental controller.

This premium quality industrial grade relay has eight 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords. Please read the entire instructions before attempting to install and operate this unit. If you are unfamiliar with electrical wiring and circuits, we strongly recommend that you consult with a licensed electrician and/or have the unit professionally installed so that it meets local & national codes.

Specifications:

Size = 9.5”H x 7.5”W x 4”D

Weight = 0.55 lbs

Voltage: 120/240

Frequency: 50/60Hz

Rated Amperage: 50Amps

Maximum Lighting Wattage: 8000 watts / 1000 watts per outlet

Operating temperature range: 32-110° F

Operating humidity range: 0-99% RH non condensing

Minimum relay operations: 100,000 at full load

The trigger cable can be plugged into a standard 24-hour timer or environmental controller

Premium quality industrial grade relay

Package includes:

1× Lighting Relay Controller

• Maximum Lighting Wattage: 8000 watts / 1000 watts per outlet
• Outlets are controlled by one 120 volt trigger cable
• Delay starting times via an external wall timer
• Premium quality industrial grade rela
• Dual trigger cord sets that give you the flexibility to stagger lighting schedules

Product description

High quality CO2 regulator made from precision instruments. Designed for grow rooms and green houses to enhance CO2 to the growing environment. Combines a precision regulator, flow gauge, and industrial solenoid valve



Features:

Pre-set regulator

A solenoid valve with a 6 ft long 120V power cord

work with any 120 volt control device/Timer

Adjustable to 0.5 - 15 cubic feet per hour

Complete with 6 foot power cable and 15 foot of 1/4 inch air line

Increases the plants metabolic rate; speeding up growth rates and yields by up to 40%

A must for optimum plant production in high light intensity gardens.



Specifications:

Connects directly to 20# or 50# CO2 Tank

120V AC with 6' grounded cord

15' of 1/4" airline

The precision flow-gauge can release between 1/2 and 15 SCFH of CO2 per hour (Standard Cubic Feet per Hour)



Package Contents:

1x CO2 Regulator

1x15 feet black tubing CO2 line

• MATERIAL: Made from precision instruments, with flow gauge and industrial solenoid valve and high quality brass construction.
• SPECIFICATION: 1.58" high pressure gauge: 0-4000 PSI. Flowmeter: 0-15 scfh. Inlet connection: cga-320.
• COMPONENT : With 5 meters free plastic tubing and USA standard plug. Hose tail suit for 4.2 mm inside diameter hose.
• GREAT OPTIONS: This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth.
• BENEFITS: It can be used for grow rooms, grow tent and green houses to enhance carbon dioxide to the growing environment,speed up growth rates and yields by up to 40%, it can also be used for aquarium

Product description

connect your aquarium's lighting system and cuts off the CO2 supply depending on light. keeping your aquatic plants healthy, more convenient and save energy.

SUITABLE FOR: G1/8 interface trim valve fits for the single head solenoid valve. If not the G1/8 interface, fits for the 4*6mm air (inner diameter 4mm and outer diameter 6mm). Nuts locking design for CO2 connection, anti-shedding and good sealing. No leaking.

DURABLE AND EASY TO INSTALL: Be made of aluminum alloy material, b and sturdy. Low temperature design, temperature below 30°, low heat and low noise. According to user's need to control the outlet time, convenient, stable and easy to install.

SAFETY: High-quality power cord 2*0.5mm2 (the total length of the power cord is 1.4 meters with long plug), with "anti-shock" , safety and no safety hazards. 

WORRY FREE WARRANTY: Any problem, please contact our store without hesitation. Honor to serve you!



Specification: 

Name: Solenoid valve

Color: Silver

Material: Aluminum alloy

Power: 1.6W

Voltage: 100V-240V input, 12V stable low voltage output

Optional type: Single head/double head

Single head: Can connect to the trim valve, G1/8 interface only

Double head: Connect to the 6*4mm(inner diameter 4mm,outer diameter 6mm) air

Size: 7.2*7.1*1.5cm

Power cord: 1.4m



Note:

Only suitable for valve's output pressures below 6KG.

Trim valve interface(if not the G1/8 interface) can not be connected to the single head, can only buy a double-headed solenoid valve and 4*6mm air .

If you have a small leak when it's off, pls try flipping the inlet/outlet.



Package Information:

Package size: 13*13*5.1cm

Package weight: Single head: 172g; Double head: 241g

Gift Box Packaging



Package List:

1* Solenoid valve

• NOISELESS: 100-240V wide voltage input, DC 12V output, the solenoid valve is UPGRADED 12V noiseless version.
• SETTABLE: Turn on and off automatically when used with a timer. Thanks to this CO2 magnetic solenoid valve, timer can connect your aquarium's lighting system and cuts off the CO2 supply depending on light. keeping your aquatic plants healthy, more convenient and save energy.
• SUITABLE FOR: G1/8 interface trim valve fits for the single head solenoid valve. If not the G1/8 interface, fits for the 4*6mm air (inner diameter 4mm and outer diameter 6mm). Nuts locking design for CO2 connection, anti-shedding and good sealing. No leaking.
• DURABLE AND EASY TO INSTALL: Be made of aluminum alloy material, strong and sturdy. Low temperature design, temperature below 30°, low heat and low noise. According to user's need to control the outlet time, convenient, stable and easy to install.
• SAFETY: High-quality power cord 2*0.5mm2 (the total length of the power cord is 1.4 meters with long plug), with "anti-shock" , safety and no safety hazards.

Product description

Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter - 0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High quality oil-less pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 Volts/60Hz.

• Compatible with Titan Controls CO2 Controller or other 120 volt controllers and timers
• Precision accuracy flow meter - 0.5 to 15 SCF/hour
• Features heavy-duty solenoid valve
• High quality oil-less pressure gauge
• Includes two plastic tank washers and 12 ft of CO2 dispensing line

User questions & answers

Question:	Can multiple tanks run off a single regulator
Answer:	3/16” to 1/4”
Question:	Can I use the co2 rain tubing which is 1/8 " diameter
Answer:	It is CGA-320, THANKS!
Question:	Is there a solenoid cap replacement I can purchase or can I use something else such as a washer
Answer:	I don't recall a detailed one, but its operation is pretty basic. Right hand side fitting on picture attaches to CO2 tank. You need the right size hose to fit bottom fitting, two clamps are included as pictured to secure. Middle dial valve sets desired pressure amount, and bottom dial valve is open/closed. Amount of pressure is dependent to your personal need. I am carbonating green tea at about 30 PSI, and use the locking ring on middle dial valve to lock it to ensure it stays at 30 until tank starts running dry. Happy Carbonating!!!
Question:	You your gage always say low i got a 50lb tank and never been off the low in the green? Of is mine not working right
Answer:	Use a screw driver. This pressure relief valve will automatically discharge the pressure when it is higher than the valve can hold for safety. You can screw down it with a screwdriver If you want a higher pressure volume. Some people may think that this is a kind of gas leakage caused by a defective product, well it's not...

Product features

Titan Controls HGC702710 CO2 Regulator 1 Amp, 120 Volt

Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter—0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High-quality oilless pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 V/ 60 Hz.