13 best kidde smoke detectors

Product description

The Kidde i12060 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology.

• Front battery pull tab allows battery activation without removing alarm from mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easyoff cap does not require stripper tool.
• Interconnectable with up to 24 devices (of which 18 can be initiating including smoke, CO and heat alarms.
• Battery backup provides protection in case of power failure
• UL Listed, 10 Year Warranty
• Front battery door makes replacing the battery easy for anyone.

User questions & answers

Question:	what's the difference between generation 1 and generation
Answer:	Not sure. We have a 5600 and it fits perfectly
Question:	I need to replace a kiddie 1276. Is this compatible with connection and mounting plate
Answer:	I don't know if it fits the 5400. I have a pool frog and it fit perfectly. Sorry wish I knew what the 5400 was.
Question:	Are all Kidde i12060 alarms interchangable, or do I need to replace with my original model number (408-21006376) as well
Answer:	This tool contains a 9/16 inch and 7/8 inch socket, which should cover most of the more popular filter tanks.
Question:	What is the mfr date of this unit
Answer:	Not sure on gauge, but used it to repair large triangle rip in pool liner (12” by 14”) formed over winter where an old small patch gave way and with extra put bigger patches over other small ones, it has stood up to my dog scratching over new patch and elements so far, so as a pool liner fix, the gauge is sufficent

Product features

Kidde AC Hardwired Smoke Alarm

• Provides a Hush feature to quickly silence nuisance alarms
• Tamper resist locking feature deters alarm theft
• Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system
• Battery backup provides protection in case of power failure
• Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms.

Fewer Callbacks

• Front battery door makes replacing the battery easy for anyone.
• One button design for easy operation and less confusion. Operates Hush and alarm test.
• Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp.
• Dust cover protects sensor from contaminates during construction reducing nuisance alarms.

Product description

The Kidde i12040 contractor 6 pack is sold as one master pack that contains 6 individual units. These alarms are 120-Volt hardwired ionization smoke alarm with 9-Volt battery backup and Hush feature. Smoke alarms have the ability to function as single units or in an interconnected system.



Test button, tests unit's electronic circuitry, horn, and battery function

9-Volt battery back up (21025830)

Quick connector - makes installation fast and easy

Tamper resist locking pin - helps deter alarm tampering and theft

Hush feature - temporarily silences nuisance alarms



Voltage (volts): 120

Connector/Contact Type: 3-Wire

Alarm/Detector Features: Battery Back-Up,Hush Feature,Interconnected,Value Pack

Pack Size: 6

Alarm Type: Smoke

Commercial / Residential: Commercial / Residential

Power Source: Hardwired

Included: Batteries

Alarm Sensor Type: Ionization

Certifications and Listings: 1-UL Listed





Product Width (in.): 6.6

Product Height (in.): 6.5

Product Depth (in.): 10.7

Ship Width: 8

Ship Height: 10

Ship Length: 12

• Hush feature temporarily silences nuisance alarms
• One touch test button tests unit's electronic circuitry
• Battery backup 9V battery included
• Tamper resist locking pin helps deter alarm tampering and theft
• UL Approved

User questions & answers

Question:	is it photoelectrict? Can it be connected to a fire alarm system
Answer:	Your warranty starts at the date of purchase. Keep your receipt. Your 5 year shelf life starts the day you power it up. The expiration date is hard coded into the software and only starts the day you plug it in..... This is from BRK WEBSITE
Question:	Have u noticed high electric bill
Answer:	It doesnt matter. If you have a device alarming, you, family and pets need to remove yourself from the house and possibly call fire department. Both sources will kill you.
Question:	is this detector one that is disposed off when battery is down
Answer:	According to the National Fire Protection Association: Choose smoke alarms that have the label of a recognized testing laboratory.Install smoke alarms inside each bedroom, outside each sleeping area and on every level of the home, including the basement.On levels without bedrooms, install alarms in the living room (or den or family room) or near the stairway to the upper level, or in both locations.Smoke alarms installed in the basement should be installed on the ceiling at the bottom of the stairs leading to the next level.Smoke alarms should be installed at least 10 feet (3 meters) from a cooking appliance to minimize false alarms when cooking.Mount smoke alarms high on walls or ceilings (remember, smoke rises). Wall-mounted alarms should be installed not more than 12 inches away from the ceiling (to the top of the alarm). If you have ceilings that are pitched, install the alarm within 3 feet of the peak but not within the apex of the peak (four inches down from the peak).
Question:	I am looking at replacing my kidde 1275 smoke alarms, which should I replace with as mine were made
Answer:	The "radioactive part" is how it works. Don't like it? Don't buy it. Simple. As for false alarms, this unit with its "radioactive part" is actually much more likely to give false alarms that condition people to ignore them. It is also much less sensitive to the smoldering, smoke-producing fires that are more common in homes. That's why ionization detectors are no longer recommended in residential settings. Experts now recommend only photoelectric devices in homes, so if you have these, you should replace all of them with the SC7010B.

Product description

The Kidde I9010 is a 10-year, sealed battery operated smoke alarm featuring hush, alarm memory, and a self-activation mechanism that makes installation simple and easy. The alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches-everything is automatic. The sealed-in board-mounted battery will power the unit for its complete 10-year life. No replacement battery will ever be needed, and an end of life alert indicates when it is time to replace the alarm. At the end of the alarm's 10-year life, deactivation of the alarm is just as easy. Using a tool such as a small screwdriver, a deactivation switch removes power from the alarm and renders the battery safe for disposal. As an added safety mechanism, The alarm lockout feature prevents a deactivated unit from being mounted back on the mounting bracket. This alarm also features hush technology, allowing consumers to temporarily silence nuisance alarms, and an alarm memory feature that alerts the user via rapidly flashing LED lights if the alarm has sounded since the last time The test/Reset button was used. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home.

No need to worry about faulty batteries with the Kidde i0910 10-Year Sealed Lithium Battery-Operated Smoke Alarm. This worry-free alarm contains a sealed-in lithium power supply that lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and battery costs over its lifetime. Save up to $60 in Battery Replacement Costs This worry-free smoke alarm can save you a lot of time and money over its lifetime (an estimated $60 over the 10 year life of the alarm). This alarm can save you--and the local landfill--from the cost, hassle, and waste of lots of batteries. This smoke alarm is also a great choice for hallways and high ceilings, where changing batteries can be especially difficult. Never Replace a Battery Again. View the 10-year worry-free smoke alarm. i4618 Never change a battery again. The Kidde Sealed Lithium Smoke Alarm saves you up to $60 and eliminates battery replacement hassles. Product Highlights No battery replacement for the lifetime of the alarm Powered by a tamper-free sealed lithium power supply Self-Activation automatically activates unit when attached to bracket Smart Hush silences alarm in non emergencies Money-saving alarm is great for homes and rental properties This alarm uses ionization sensing technology for the smoke alarm. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Great for Homes and Rental Properties This tamper-free alarm prevents battery or alarm removal, eliminating worry about unauthorized battery removal or unauthorized deactivation of the alarm. Also, this alarm is a good choice for rental properties and high-density dwellings, as its sealed tamper-free design prevents theft, while also reducing labor and material costs. This helps to ensure that the property and inhabitants are protected by a fully operational alarm. Easy to Install with Self Activation The innovative automatic activation of this alarm is unlike any other smoke alarm design. The alarm will automatically activate when it is attached to the mounting bracket; there are no pull tabs and no switches--everything is automatic. At the end of the alarm life, the unit will chirp, indicating the alarm is in need of replacement. You can use a simple tool, such as a screwdriver, to deactivate the unit, stopping the low-battery chirp and making the alarm safe for disposal. The sealed-in board-mounted batteries will power the unit for its complete 10-year life. No replacement batteries will ever be needed. Trademarked Hush Feature for Convenience By pressing the smoke alarm's Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to eight minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every eight seconds while in Hush mode. This indicates that the alarm is in a temporarily desensitized condition. Additionally, the smoke alarm will automatically reset after approximately eight minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period. Power Outage Protection, Indicator LED, and Test Feature A 10-year sealed lithium battery powers this alarm, providing continuous protection against smoke and fire hazards even during power outages. Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 40 to 45 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a Test/Reset button that enables you to periodically test its circuitry and horn. The unit measures just 5.6 inches in diameter and 1.5 inches in depth, and it features a neutral, white finish. This smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty. About Kidde: A UTC Fire & Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls, such as flame detection and explosion-suppression systems. Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004. What's in the Box Kidde i0910 10-Year Sealed Lithium Battery-Operated Smoke Alarm with mounting bracket and hardware, 10-year limited warranty, and bilingual user's manual.

• Sealed-in lithium battery – Sealed-in lithium power supply; No battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm
• Self-activation – Alarm automatically activates when attached to the mounting bracket, HushTM – Will temporarily silence nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode
• Alarm memory – Rapidly flashing LED alerts user if the alarm has sounded since the last time the test/reset button was used. Temperature Range-40˚F (4.4˚C) to 100˚F (37.8˚C)
• End of life warning – Alarm chirps every 40-45 seconds indicating the alarm is in need of replacement, tamper resist – (when activated upon installation) effective in preventing someone from removing the unit from the mounting bracket
• Test/reset button – Tests unit’s circuit operation and resets memory after an alarm condition occurs, LED – A flashing red indicator light with four modes of operation: Standby, alarm mode, hush mode, and memory set
• Sealed-in lithium battery never replace battery over the ten-year life of the alarm
• Smart hush temporarily silences nuisance alarms and will not allow hush mode to be activated unless the unit is in alarm mode

User questions & answers

Question:	How many alarms are in the "pack
Answer:	The warranty is in the manual and typically on the back of the unit.
Question:	Does the led light blink during normal use--if it is in the bedroom, this may be an issue for me
Answer:	This is a battery operated unit only
Question:	how do u mount this to ceiling? can i use self stick instead of screws etc
Answer:	I don't know but it fit perfectly into a 20+year mounted kiddie plate when the old one died if that helps, it means it has remained unchanged.
Question:	Is this a photoelectric smoke alarm
Answer:	Once the battery died, I was no longer able to insert a new battery bc it no longer works :( they lasted approximately 2-3 years.

Product features

10 Year Life

Easy Installation

Peace of Mind

Product description

Kidde 21026043 battery-operated (not hardwired) combination smoke/carbon monoxide alarm with voice warning KN-COSM-BA. Interconnects - No.

• Voice Alarm – Announces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces “Fire” when a smoke or fire hazard is detected and announces “Warning, Carbon Monoxide” when a CO hazard is detected
• Combined Carbon Monoxide and Smoke Alarm – A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home decor attractive.
• Audio alarm: 85 dB at 10 feet. Test/Reset Button and LEDs – Tests alarm circuitry and triggers the voice announcement. Flashing green for normal operation and flashing red for alarm condition. Humidity Range: 10 percent to 95 percent relative humidity non-condensing
• Battery - Provides protection even during power outages when many fire and carbon monoxide incidents occur. The unit warns of a low battery condition by announcing “low battery” and by initiating an alarm chirp and activating a flashing red LED. The battery door will not close unless the batteries are properly installed. Note: The date printed on the item is manufacturing date, not the expiration date. Refer to the PDF attached below in the technical specification for manual.
• Voice Announcements - Hush Feature temporarily silences nuisance alarms with “Hush Mode Activated” and “Hush Mode Cancelled” voice announcement. If the alarm had detected a CO level of 100 ppm or higher, the unit will announce “Carbon Monoxide Previously Detected” to warn of the CO incident, when the Test/ Reset button is pressed. Temperature range: 40˚F (4.4˚C) to 100˚F (37.8˚C). Voltage (volts): 4.5

User questions & answers

Question:	How frequently do we need to change the batteries
Answer:	They don’t connect or require wiring, place them wherever needed
Question:	Can this unit be used to replace the hard wired smoke detector in my home
Answer:	I received the energizer E522 max 9 V new batteries
Question:	Need to replace a kn-cosm-b. is the mount the same on the much newer kn-cosm-ba
Answer:	I don't understand your question. All batteries will burn if you put them in a fire.
Question:	Does the smoke detector have both photoelectric and ionization sensors
Answer:	Malaysia

Product features

Easy Access Front-loading Battery Door

Easily replace the 2 AA batteries without disconnecting from mounting bracket. This alarm model also includes a safety feature in the battery safeguard – The battery door will not close unless the batteries are properly installed.

Giving You Peace Of Mind

There’s nothing more important than keeping your family and home safe, and when fires are a very common type of emergency a homeowner can face, you want to be prepared. The Kidde KN-COSM-BA combination Fire Detector and Carbon Monoxide Detector pairs two life saving devices into one unit. It uses an ionization sensor and electrochemical sensor to monitor your home for potential hazards, so you will always feel safe and confident.

Comprehensive Alerts

Voice alarms along with chirps indicate the hazard that has been detected for fast response. Alarms include:

> Fire: The red LED will flash along with three long beeps, followed by the message “Fire!”

> Carbon Monoxide: Four short beeps followed by the message “Warning! Carbon Monoxide!”

Product description

Kidde Monoxide Alarm.

From the Manufacturer

The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This unit combines a Carbon Monoxide and Ionization Smoke Alarm, providing two important safety devices in a single unit. This alarm includes a voice warning system that announces "Fire, Carbon Monoxide, Low Battery or Smart Hush Activation." The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This unit is hardwired and will work with many interconnected systems. This combination alarm has battery backup, protecting you and your family even during a power outage when many incidences occur. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO and Smoke alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades. Ionization sensing alarms may detect invisible fire particles associated with fast flaming fires sooner than Photoelectric alarms. Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home.

• Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating), Battery Backup (2-AA batteries included)-Provides protection during power outages. Front Loading Battery Door-Replace the backup batteries without disconnecting from mounting bracket
• Humidity range: 10%-95% relative humidity, non-condensing. Battery Lockout System-The battery door will not close unless the batteries are properly installed, Alarm Tamper Resist-Helps deter from tampering and theft, Adjustable Mounting Bracket-Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
• Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected a CO level of 100ppm or higher since it was last reset, HushTM Feature-Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before HushTM is activated)
• Ionization Sensor Technology-Ideal for detecting fast flaming and other types of fires, est Button Functions: – Tests the unit for proper operation - Peak Level memory - Resets the Carbon Monoxide alarm
• Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSHTM mode
• Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds
• Talking alarm announces the hazard type detected, helping to speed up reaction time

Product features

Immediate Protection for Your Home

When fires are a very common type of emergency a family can face in their home, it’s important to do everything you can to be prepared. The Kidde KN-COSM-IBA interconnected combination smoke and CO alarm combines an ionization smoke sensor, which can detect smaller, less visible fire particles, with an electrochemical sensor, which detects CO, into a single, superior device. This interconnectable smoke and carbon monoxide detector provides constant, reliable protection to your home.

Install in Minutes

Complete with an adjustable mounting bracket, mounting hardware, a quick-connecting wire harness, two AA batteries and a user’s manual, this smoke and carbon monoxide alarm is easily set up in any room of your home for instant protection. It has a battery safeguard so it can’t accidentally be mounted without batteries. It meets the safety standards set by Underwriters Laboratories (UL) so that you can be confident of its quality.

Voice and Alarm Notifications

A verbal warning system reduces confusion and helps get occupants to safety.

Alarm warnings include:

> Fire: The red LED will flash with three long beeps, followed by the message “Fire! Fire!”

> Carbon Monoxide: Four short alarm beeps followed by the message “Warning! Carbon Monoxide!”

Alarms will repeat until hazard is cleared.

Product description

There are only minutes to escape a house fire. The sooner you hear the smoke alarm, the sooner you can get out safely. Kidde interconnected ionization smoke alarms provide early warning against fire by linking together the smoke alarms in your home, dramatically increasing your ability to hear an alarm anywhere, regardless of where the fire starts. This alarm is a 120V AC powered ionization smoke alarm with 9V battery back-up and hush feature. This smoke alarm has the ability to function as a single unit or in an interconnected system. Install UL listed smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas and replace smoke alarms every 10 years. Ionization sensing alarms may detect invisible fire particles sooner than photoelectric alarms. Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home.

• Kidde Direct Wire Ionization Smoke Detector, Ac/Dc
• Fire safety starts with this AC/DC smoke detector from Kidde
• This is manufactured in China
• Temperature range: 40˚F (4. 4˚C) to 100˚F (37. 8˚C)
• Battery Backup - 9V Battery Backup (included).

User questions & answers

Question:	Would it fit in kidde kn-cosm-ib base? (man in
Answer:	All I12060 model Kidde alarms are interchangeable.
Question:	What color should the light blink
Answer:	The only date I see on the label attached to the unit states: 2020 May 29. I ASSUME this is the manufactured date. Unit was made in China.

Product features

Hardwire 120-Volt Inter-Connectable Smoke Alarm with Battery Backup

The Kidde i12040 contractor 6 pack is sold as one master pack that contains 6 individual units. These alarms are 120-Volt hardwired ionization smoke alarm with 9-Volt battery backup and Hush feature. Smoke alarms have the ability to function as single units or in an interconnected system.

All interconnected alarms will sound when one alarm goes off

Quick connector - makes installation fast and easy

Smoke detector requires hardwire installation

Product description

The Kidde Front-Loading Smoke and Carbon Monoxide alarm (part 21007624) offers protection from two hazards – fire and CO – in one unit. This AC-wire with battery backup alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, “Fire, Fire” or “Warning, Carbon Monoxide. ” The uniquely designed front loading battery compartment makes battery replacement quick and easy, and ensures proper installation. Manufactured with photoelectric sensors for detecting smoke and fire, this alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers. Architectural and Engineering Specifications - The combination smoke and carbon monoxide alarm shall be Kidde Unit Number KN-COPE-I (part number 900-0213) or approved equal. It shall be powered by 120VAC, 60Hz source with a 9V battery backup. The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operating range shall be 5% - 85% relative humidity. The unit shall incorporate a photoelectric smoke sensor with nominal sensitivity of 2.05%/ft. The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL2034 Single and Multiple Station Carbon Monoxide Detectors. The unit shall qualify for UL-approved wording on the package: “World’s Most Accurate Carbon Monoxide Alarm”. The combination alarm can be installed on the surface of any wall or ceiling following the UL/NFPA/Manufacturer’s recommended placement guidelines. The alarm can be installed on any standard single gang electrical box, up to a 4”octagon junction box. The electrical connection (to the alarm) shall be made with a plug-in connector. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling. No additional pieces shall be required to activate this feature. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. The alarm shall include a test button that will electronically simulate the presence of smoke and CO and cause the unit to go into both modes of alarm. This sequence tests the unit’s electronics to ensure proper operation. The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding levels of CO. 70 ppm CO Concentration 60 – 240 minutes 150 ppm CO Concentration 10 – 50 minutes 400 ppm CO Concentration 4 – 15 minutes The combination alarm shall have two methods of warning for danger: a piezoelectric horn that is rated at 85 decibels at 10 feet and a voice warning that identifies the danger. For a CO incident, the horn will sound in the repetitive manner – four fast beeps, a short pause, four fast beeps, a short pause. In between, the unit will announce “Warning Carbon Monoxide ” In a Smoke incident, the horn will sound in the repetitive manner – three beeps, a pause, three beeps, a pause. In between, the unit will announce “Fire! Fire! ” The unit shall incorporate 2 LED’s. A green LED will be steady on when AC power is present, flash every 30 seconds when in the battery only mode, every 16 seconds to indicate alarm memory, and every 2 seconds to indicate the Hush“ mode is active. A red LED will flash in unison with the sounder pattern. The unit shall include the Smart Hush feature that silences the unit for approximately 8 minutes if a nuisance alarm condition occurs. The Green LED on the alarm will flash every 2 seconds while in Smart Hush and will automatically reset itself. It also provides voice annunciation of “Hush Activated” when Smart Hush is activated and “Hush Cancelled” when the Hush cycle ends. The unit shall also indicate a low battery warning utilizing each of the following methods: a brief alarm chirp, the voice announcement of “Low Battery! ” The unit shall at a minimum meet the requirements of UL 2034, UL217, NFPA72, (chapter 11 2002 edition) The State of California Fire Marshall, NFPA101 (One and two family dwellings) Federal Housing Authority (FHA), Housing and Urban Development (HUD). It shall also include a 10-year manufacturer’s limited. Claim approved by UL, based on manufacturer’s reported testing.

• Provides protection from fire and carbon monoxide in one unit with Photoelectric sensor.
• Fire Warning: The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message “FIRE FIRE ”. The alarm will repeat pattern until unit is reset or smoke is eliminated.
• Carbon Monoxide Warning: Four short alarm beeps followed by a verbal warning “Warning carbon monoxide ” This continues until the unit is reset or the CO is eliminated.
• Low Battery Warning: One chirp followed by warning “LOW BATTERY”. The red LED light will flash. This pattern will continue every minute for the first hour. After the first hour the red LED light will flash once every minute accompanied by the chirp sound. The “LOW BATTERY” warning will only sound once every fifteen minutes. Voice Hush Indication: “HUSH ACTIVATED” and “HUSH CANCELLED” voice announcement
• Alarm Memory: The green LED will blink once every 16 seconds to alert a user when the unit has alarmed for smoke or has detected a concentration of CO. If the alarm has detected a CO level of 100ppm or greater, when the Test/Reset button is pressed the unit will announce “CO PREVIOUSLY DETECTED”. If the alarm has detected abnormal levels of smoke since its last test, it will produce three rapid beeps.

User questions & answers

Question:	When these are interconnected with other units, can hushing one of them hush all of them? Some of mine are in places that are hard to get to
Answer:	This RF-SM-ACDC alarm will interconnect wirelessly to other RF-SM-ACDC alarms and will interconnect through a 3 wired circuit to other Kidde hardwired alarms.
Question:	does it come with the hardwire connector
Answer:	The unit is not designed for temperatures below 60F or above 100F.
Question:	Do you have to hardwire it in? Can it run on just the battery
Answer:	I have one hardwired and two battery powered. I just followed the instructions and it all worked out. easy.
Question:	How do you tell if it is working properly. Is it supposed to have a constant light
Answer:	The rf-sm-ac is the hard wired model with battery backup, the rf-sm-dc is the battery powered unit which is not hard wired.

Product features

Always Alert

In order to monitor your home even if you are away, this detector includes an Alarm Memory feature. If the green LED is blinking once every 16 seconds, the unit has detected CO levels of 100PPM or higher, or detected smoke and then ceased its alarm. Pressing the Test/Reset will reset the memory and inform you of the hazard detected.

Easy to Install

Ensure the safety of your family and home with the combination smoke and carbon monoxide alarm from Kidde. This is a hardwired alarm that can be used in an interconnected system, and it features a battery backup, in addition to voice alerts. Using an advanced photoelectric sensor, capable of detecting visible fire particles associated with smoldering fires, and an electrochemical sensor for CO detection, you can rest easy and feel protected.

Easy Access

If the low battery warning sounds, there is a convenient front-loading battery door so that you don’t have to remove the alarm from its mounting bracket to replace the alarm. Additionally, to ensure that there is always a properly functioning battery, the battery compartment will not close if the battery is not installed correctly.

Product description

The Kidde i9050 basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm, includes a test button to verify the unit’s electronic circuitry, horn and battery function are work properly. The i9050 also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Temperature Range: 40˚F to 100˚F (4˚C to 38˚C).

The battery-powered Kidde i9050 ionization smoke alarm is designed to protect you and your family from the dangers of smoke and fire. This basic smoke alarm is easy to install throughout your home, and it's powered by a 9-volt battery (included). This version comes as a single, but it's also available as a twin pack. Kidde i9050 Includes 9-volt battery. At a Glance i9050 Battery-Operated Basic Smoke Alarm At a Glance: Easy installation--no wiring required Powered by 9-volt battery for continuous protection even during power failures Flashing LED shows alarm is receiving power Low-battery indicator 10-year limited warranty At a Glance Features This basic battery-operated smoke alarm is powered by a 9-volt battery (included), providing continuous protection even during power outages. It includes a flashing red LED to indicate the alarm is receiving power as well as a test button to verify the unit's electronic circuitry, horn, and battery functions are working properly. During a smoke incident, a piezo-electric horn (rated at 85 decibels at 10 feet) will sound in a repetitive manner--three beeps, a pause, three beeps, a pause. It also offers a low-battery warning and a tamper-resistant feature that deters removal of the unit from the wall or ceiling. It's backed by a 10-year limited warranty. The Kidde i9050 smoke alarm uses ionization sensing technology, which generally detects invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde recommends that both ionization and photoelectric smoke alarms be installed to insure maximum detection. What's in the Box One Kidde i9050 Battery-Operated Basic Smoke Alarm, one 9-volt battery, and operating instructions. Kidde i9050

• Easy installation – No wiring required
• Battery operated (9V battery included) – Provides continuous protection even during power failures
• Flashing LED – Indicates alarm is receiving power
• Test button – Verifies battery and alarm operation
• Low battery indicator – Chirps when battery needs replacement

User questions & answers

Question:	Is this the unit that was recalled for not detecting smoke
Answer:	so after fighting with it, i believe the answer might be smoke alarms? the octagonal shape with sides that are parallel to the battery case appear to fit into smoke alarms while the hexagonal (also on Energizer) do not. particularly First Alert/Intertek model SC9120B
Question:	how long do the batteries last
Answer:	Duracell components and batteries are produced at several locations in the U.S. and abroad, including Europe and China. If you have additional questions please contact our Customer Relations team at 800-551-2355 between the hours of 9am and 6pm EST.
Question:	Why can't this be shipped to area code
Answer:	Usually a 2 year lifespan from the date of manufacture. I have always had good luck with Duracell lasting the longest, more than the bunny claims!
Question:	does it have a siliene button
Answer:	It's the date usually found on the btry. On my last purchase of Duracell 9v coppertop btry's MAR 2015 is printed on the btry. The package, while it has no good to date on it says it is guaranteed fresh for 5 years. On this packaging you can not see a good to date on it until you open it and look at the btry. Therefore since it is gtd for 5 years I believe the manufacture date was 2010. Using a top rated btry like Duracell we change smoke alarm btrys every 2 years contrary to the suggested 1 year time frame of replacement. We also check the alarm function every month. We also use these 9v btry's in our garage door openers. Hope this answers your question. LR

Product features

Easy Installation: No wiring required

This smoke detector is battery-powered, easy to install and uses an advanced ionization sensor to detect invisible fire particles so that you can react quickly and get to safety if any hazard is detected.

Protect What Matters Most

Keeping your family safe and prepared for anything is an essential part of your life - and with the Kidde smoke and fire alarm, you will be confident that you are protecting your home in case of emergencies.

Quality Design

The Kidde i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed.

Product description

Kidde 21010161 10 Year Bedroom Smoke Alarm

• Sealed-in 10-year lithium battery
• Voice alarm
• Photoelectric Sensor
• Automatically activates when attached to bracket
• End of life warning

User questions & answers

Question:	kidde has some labeled for hall, bedroom, kitchen, living area. hall has a light, kitchen also looks for CO, whats diff between bedroom, living area
Answer:	No
Question:	How many in this package (amazon implies 3) Price: $33.84 ($11.28 / Piece
Answer:	No it does not come with batteries. Each unit will require 2 AA batteries.
Question:	Do these smoke detectors talk to one another? I want to order 4 of them
Answer:	Yes that's why it's called a combination smoke and carbon monoxide detector alarm.

Product features

Bedroom Sealed Lithium Battery Operated Smoke Alarm

Kidde Alarm is powered by sealed, long-life lithium batteries, meaning the alarm is always on. This alarm is ideal for the bedroom with voice feature improves warning during sleep. With a sealed, long-life lithium battery smoke alarm, with voice feature installed in your bedroom, you can enjoy peace of mind knowing your bedroom smoke alarm is always on; 24 hours/day, seven days a week for a decade.

Equipped with a piezoelectric horn rated at 85 dB at 10 feet

Lithium battery

Protection during power outages and no low battery chirps

Product description

The P4010DCS-W is a 10-year, sealed battery smoke alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event, and helps reduce confusion with verbal announcements such as “Replace alarm” at end of alarm life, and “Hush mode activated” when a nuisance alarm is silenced. The three color LED ring helps users quickly determine standby, alarm, or error mode of the alarm. Kidde P4010 Series Alarms contain 10-year tamper proof batteries that eliminate the need for battery replacement, and ends worry over unauthorized removal. Users are further shielded from late night battery chirps by the unit’s Ambient Light Sensing feature, which establishes a day/night cycle and prevents alarm chirping in dark conditions. Wire-Free Interconnect triggers each connected alarm in the home to sound once smoke is detected, which can provide more time to react. The National Fire Alarm and Signaling Code (NFPA 72) has required smoke alarms in new homes to be interconnected since 1989, which traditionally involves running wiring to each alarm. Older and remodeled homes can now be updated to current standards without having to run any wiring to each alarm. Existing networks of interconnected alarms can be expanded with use of a single AC Wire-Free Alarm and additional compatible DC Wire-Free alarms.

• Sealed-in Lithium Battery: No battery replacement required
• Voice Notifications: Unit verbally announces “Fire! ” and other alerts such as “Replace Alarm, ” which helps the user better understand current status of the unit.
• Flashing LED Status Ring allows easy identification of current state of alarm
• Bug Screen: Protects alarm from insect ingression
• Wire-free interconnect compatible only with other P4010 Wire-Free models

User questions & answers

Question:	how many units can be connected to each other
Answer:	None
Question:	When they all go off, how do I tell which one caused the alarm
Answer:	6 inches
Question:	can they be used without interconnecting
Answer:	According to the instruction manual, a 9V battery should last for a year in this unit.
Question:	Do they make this same product as a dual photoelectric and ionization unit...with 10 year batter and interconnecting
Answer:	Battery operated. I am returning them because they are carbon monoxide detectors only... Not combination smoke/CO detectors.

Product features

Monitor Your Whole Home

For easy installation, this smoke alarm has a supervised, wire-free interconnect. It uses radio signals to connect up to 24 compatible devices, including CO detectors, ensuring that if one unit detects an incident in your home, all the connected units will also sound an alarm. This prompts immediate, safe reactions.

Expertly Protected

Keep your family and home safe with this pack of 2 interconnectable smoke detectors from Kidde. These wire-free alarms use a 10-year, sealed lithium battery, and photoelectric sensors to detect visible fire particles associated with smoldering fires. They are protected from insect ingression via a bug screen and are compatible with RemoteLync Bridge. You will be able to connect to the Kidde app for additional features and benefits for dependable protection.

Clear Indicators

This smoke detector features an LED ring, which will flash to indicate its current mode. A green LED will flash every 60 seconds during standby. If an incident has been detected, the red LED will flash while 3 long chirps will repeat, and the voice alarm announces “Fire!” The red and amber LED alternate if there is a memory event.

Product description

Kidde i12010S Hardwired Smoke Alarm

• Ionization sensing technology
• Sealed in 10 year lithium battery backup
• 360 degree mounting plate with tamper resist feature
• Single test/hush button
• UL 217 listed

User questions & answers

Question:	Can these units be used in a system with First Alert hardwired detectors
Answer:	Hello. No. This alarm does not interconnect or communicate at all. You will want the P4010DCS-W alarm.
Question:	Does this model have the hush button
Answer:	I am pretty sure it can be reset. By pushing the center Bosch button it should reset. Hope this helps

Product features

Hardwired Inter-Connectable Smoke Alarm with 10-Year Battery Backup

Kidde Hardwired 120 Volt 10 Year Smoke Alarms protect your family for 10 years with a 'sealed in' Lithium Ion Battery back up. 10 year smoke alarms protect against tampering with a sealed in battery. 10 Year alarms provide an 'End of Life' indicator at end of the product life alerting you to replace your smoke alarm.

Protection during power outages and no low battery chirps

Smoke detector requires hardwired installation

10-year lithium battery backup lasts the life of the alarm

Product description

Kidde RF-SM-DC wireless interconnect battery-operated smoke alarm.

What's in the Box One 0919-9999 smoke alarm with mounting bracket and mounting hardware, 3- AA batteries, a 10-year limited warranty and a bilingual user's manual. The Kidde 0919-9999 Battery-Operated Wireless Smoke Alarm allows for the easy installation of an interconnected smoke alarm system without the high cost and hassle of rewiring your home. The alarms are wirelessly linked so that when one alarm is triggered, all alarms will sound. This alarm can also be placed in a detached workshop or shed and linked into the home's interconnected system. Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. Newer homes are required by code to have interconnected alarms. Wireless technology now enables any home to have an interconnected system. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home. Choose the Right Wireless Alarms for Your Home Kidde offers two wireless product options: a Battery Powered Smoke Alarm, and an AC Powered Smoke Alarm. These products enable you to customize your system based on your specific needs. Read below to see which Kidde wireless smoke alarms are best for your home. Why Wireless? When one alarm sounds they all do Ability to interconnect without wires Install in minutes, anywhere in the home Less cost, and less hassle than re-wiring An interconnected system provides more warnings in more places in case of smoke or fire in your home. The Kidde Wireless System alarms have a hush button to silence nuisance alarms. View larger. Getting Started with Wireless Interconnect in Three Easy Steps Step 1 - Determine the type of smoke alarms currently installed in your house. 1. Battery Powered No wires; runs only on batteries. Most older homes have battery-powered smoke alarms. These alarms have no protruding wires and are battery powered. 2. Hardwired Runs on your home's electricity and may have battery backup. Only one alarm sounds when test button is pressed. If your home was built in the last 20 years, you probably have hardwired smoke alarms. If only the alarm that you test sounds, then you do not have an interconnected system. 3. Interconnected Runs on your home's electricity and may have battery backup. All alarms sound when one test button is pressed. Homes built in the last 15 years may have an interconnected smoke alarm system. If all alarms sound when you test, you have an interconnected system. Step 2 - Decide how many alarms you need in your home. The NFPA recommends at least one smoke alarm on every level of the home and in every sleeping area. Step 3 - Based on your home's current alarm set-up, decide which Kidde Wireless alarms to purchase. 1. If your home has only battery powered alarms: Purchase enough Kidde Wireless Battery Powered Smoke Alarms (0919-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage. 2. If your home has only hardwired smoke alarms: Purchase enough Kidde Wireless AC Powered Smoke Alarms (1279-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage. 3. If your home has interconnected smoke alarms: Purchase one Kidde Wireless AC Powered Smoke Alarms to replace one current smoke alarm. Kidde Wireless Battery Powered Alarms can then be installed in additional rooms. Interconnectable for Improved Safety Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes. You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system. Trademarked Hush Feature for Convenience By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every 8 seconds while in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset after approximately 8 minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period. 3-AA Batteries, Indicator LED, and Test Feature Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 10 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn. The alarm's 3-AA batteries provide continuous protection against smoke and fire hazards, even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know that it's time to change the battery. This alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty that lasts the life of the alarm. About Kidde: A UTC Fire & Security Brand Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004. What's in the Box One 0919-9999 smoke alarm with mounting bracket and mounting hardware, 3- AA batteries, a 10-year limited warranty and a bilingual user's manual.

• Wireless technology uses radio frequency to transmit and receive messages
• Battery power enables homeowners to install interconnected alarms without rewiring; Humidity Range: Up to 85% relative humidity (RH)
• Smart touch button quickly and temporarily silences nuisance alarms. Temperature Range-40F (4.4C) to 100F (37.8C)
• Wireless alarm can be installed in a detached workshop or shed
• Kidde wireless smoke alarms meet UL requirements. Interconnects up to 24 devices (of which 18 can be initiating). With 18 initiating devices (smoke, heat, CO, etc.) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules

User questions & answers

Question:	Can this be installed on the wall as well as the ceiling
Answer:	Sure but perhaps you could save some money by picking a model that in only has the features you need.
Question:	Will this unit sync with a Piper
Answer:	Can anyone give a model? This is what I'm looking for but can't find anywhere.
Question:	Does it connect to An existing alarm system
Answer:	Hello. The bedroom alarm has a voice as well as the beeps to wake you up in case of a fire. The living area does not have the special features the other alarms of this series do.
Question:	Can i install rf-sm-dc wireless in detached furnace room w/ oil burner? room is small -- @ 8' x 8 ' and can reach 85 or more degrees
Answer:	I don't see 3 referenced in advertisement. I do see: ITEM PACKAGE QUANTITY 1. It is only 1.

Product features

Wire-free Interconnect

This unit includes a Test/Reset button, which can be pressed periodically to check the alarm horn and circuitry, ensuring proper operation and constant safety. When connected to other alarms, pressing the Test/Reset button on one will check all interconnected systems. We recommend testing the alarm weekly for peace of mind.

Protect What’s Most Important

Always keep your family and home safe and prepared for any emergency with the Kidde wireless smoke detector. Using an ionization sensor, which can detect invisible fire particles associated with flaming fires, this is a battery-operated smoke alarm that can be interconnected to other Kidde alarms. It can be quickly installed in your home without worry, providing peace of mind for what’s most important to you.

Reliable Security

To deter children or others from removing the alarm from its mounting bracket, it includes a tamper resist tab. Simply snap off the four posts in the square holes on the bracket, and rotate the unit onto the bracket until you hear a click. To remove the alarm when tamper resist is engaged, press down on the tamper resist tab.

Product description

The Kidde i12040 is a 120-Volt AC hardwired powered ionization smoke alarm with 9-Volt battery back-up and Hush feature. This smoke alarm has the ability to function as a single unit or in an interconnected system. Install UL listed smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. Replace smoke alarms every 10 years. Ionization sensing alarms may detect invisible fire particles sooner than Photoelectric alarms. Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home. This smoke detector has a Quick Connect wiring system that makes it simple to install the unit and easy upgrade to a new detector when the time comes. The multi-station Interconnect system allows you to easily connect multiple detectors together so that when one alarm triggers in an area of the house, condo or apartment, the others sound at the same time. Units must all be Kidde compatible.

• Hush feature temporally silences nuisance alarms
• One touch test button tests units electronic circuitry
• Battery backup provides continuous protection even during power outages, 9-Volt battery included
• Tamper resist locking pin helps deter alarm tampering and theft
• Kidde’s smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards

User questions & answers

Question:	Is this a camera? Does it work just like a smoke detector? Will the middle button beep and or turn red if I press it where it says test weekly
Answer:	Refer to the Kidde website
Question:	What is the manufactured date
Answer:	Hello Pam O . The answer to your question is yes and no ! All mounts up on the ceiling or wall can accept different smoke detectors, but you would have to change the backing plate (ring) that is attached to the housing in the ceiling or wall to mount the new detector. Also the 120-1128B uses a different plug that plugs into the smoke detector’s back than others on the market now. There is a adapter that will allow you to connect the old plug into the new smoke detector, but honestly you should remove the old plug that is connected to the wiring in the house by removing the wiring nuts and installing the new plug with wires to the house wires in the ceiling or wall. It really isn’t that hard.... but most importantly.... SHUT DOWN THE POWER FROM THE CIRCUIT BREAKER !!!! If you like there is a YouTube video that shows it and might me helpful to you . The title to put in the search window is, “ replacing the fire x 220-1182 smoke detector with the kiddie i4618”. I know that the kiddie model is different but you will get a better idea by watching. Best of luck !
Question:	Does this really take 1 to 2 "months" to ship? Or do you mean 1 to 2 "days
Answer:	Hello. There is no direct replacement for your alarms. That being said, you can use any of our current alarms to replace your older alarms. You will have to take down all of the older alarms before putting up any new alarms. You will have to change out the mounting brackets at each location but that will just take a screwdriver to change out. You will either have to change out and rewire the wiring harness plugs at each location or you can choose to use the KA-F2 adaptors to adapt the old plugs to our new alarms. The adaptors would plug into the old plugs and the new alarms would plug into the adaptors.
Question:	Does this product satisfy Maryland’s requirements for smoke alarms
Answer:	yes, this is the direct replacement.