13 best corded circular saw

Product description

For the more experienced user who needs a powerful circular saw with advanced features, the SKIL 5280 7-1/4 inch circular saw is the saw for the job. The 15-Amp motor has the power and performance you need to quickly cut lumber and sheet goods for a room addition, deck and more. The single-beam laser guides cuts with increased accuracy, while the integrated dust blower keeps the line of cut sawdust free. The 51 degree bevel, with positive stop at 45 degrees, gives a variety of cut options, while blades changes are easier with spindle lock and on-tool wrench.

• Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts
• 7-1/4-inch carbide-tipped blade included. Spindle lock for easy blade changes.
• 51 degree bevel capacity for a wide variety of cuts. Arbor size: 5/8 inches, cord length: 6 feet
• Lightweight 6.95-pounds design reduces fatigue
• Dust blower keeps line-of-cut free of sawdust for improved visibility. Anti-snag lower guard reduces snags when making narrow cut-offs

User questions & answers

Question:	I am building a panel saw and need a circular saw with an auto on switch. Does this saw have that ability
Answer:	use the switch at the power plug and zip tie it the trigger.
Question:	What is the wattage
Answer:	With an AC motor you can't calculate the wattage by multiplying the voltage by the current (amperage). I won't get into a technical explanation but the peaks in the AC current are delayed from the peaks in the AC voltage. The wattage is equal to the volts X amps X a power factor, which is always less than one. That said, the wattage is really only of interest with respect to how much electricity your're billed for. You need to consider the current to determine whether you are overloading your wiring. The 15 amp specification would be when it reaches it's maximum load. I haven't measured this saw but my 15-amp rated table saw draws 8 amps with no load. I don't really have the means to measure it safely at full load.
Question:	Can the laser be adjusted by the user if it doesn't line up out of the box
Answer:	There is an adjuster toward the back of the laser- a 3/32 allen key can adjust it left or right. Mine moved a bit, probably from the vibration of the saw. I was able to easily adjust it back to straight.
Question:	Does this cut accurately? I bought a cheaper Skil and the cut was off by 1/4" at the base. The laser was off the same too
Answer:	I made some straight cuts in 2" x 4" s and the laser was right on.

Product features

Single Beam Laser

Use laser to guide straight cuts.

Indicator Light

Know when the saw is powered on.

Dust Blower

Keeps line of cut free of sawdust for accurate cuts.

Guarded Trigger

Minimizes accidental start up.

More About This Product

• Includes a 24-tooth carbide blade and carrying bag.
• 15 Amps, 5,300 RPM
• Depth of cut at 2-3/8 in.
• 51 degree bevel with positive stops at 45 degrees.
• Spindle lock for easy blade changes using the on-tool wrench.

Product description

• Imported from: China
• POWER TOOLS
• Commercial Brand: DEWALT
• Lightweight and compact 8.8-Pound
• Electric Brake
• Patented 15-Amp motor
• 57-Degree beveling capacity with positive stops at 45-Degree and 22.5-Degree
• Integrated Dust blower

User questions & answers

Question:	Is there a cut depth adjustment? No mention of one
Answer:	It has an adjustable depth of up to 2-9/16 inches. This saw is also a lot quieter than I expected.
Question:	Will it wash the dishes
Answer:	Does help make quick work of my honey-do list. I'm in the shop, cutting trim for new cabinets. Grateful spouse is in the kitchen, scrubbing the plates and the skillet. So, yes?
Question:	For those who have used this with a speed square or homemade fence on the left side of the handle, does the motor get in the way
Answer:	Late answer but I have to correct the previous answer. A speed square does not get in the way if you put the fat side of the square on the top of the board you are cutting. This let's the saw finish cutting before the motor reaches the top of the square.
Question:	What material is the blade made of
Answer:	100% gluten-free steel with carbide tip teeth. And 0.1% yellow paint.

Product features

DEWALT 7-1/4-Inch Circular Saw with Electric Brake

With just 8.8 lbs weight, the Dewalt 7-1/4-Inch Circular Saw is light and hence, easy to hold and use. As the saw weighs so less, it gives you the flexibility to maneuver it the way you want getting the toughest job done within minutes. Use it as long as you want, your hands won’t feel a thing and the ergonomic design also makes sure that you get the best finishing post cut.

Power through the toughest tasks like a pro

DEWALT Circular Saw has a 15amp motor that helps you power through the tough wood work task without demanding much manual effort. As the cutting and sawing wood requires a lot of strength, with such a saw you can focus on the finishing rather than worrying about how much time and strength would the job require.

Once the job is done, you do not have to worry about manually switching off the saw. The electric brake stops the blade once the trigger is released.

Perfect Cut, everytime

To ensure that you do not spend much time in getting that perfect cut, the saw comes with an Aluminum smooth base that keeps the saw levelled, minimizing the disturbance during movement.

Integrated parts to ensure ease of usage and durability

It also comes with a specially designed Ball bearing lower guard that provides protection to the equipment and is constructed to withstand harsh conditions. Also, the saw has an inbuilt dust blower that ensures clear line of sight by blowing off dust particles away while cutting.

The On-board blade Wrench Storage provides the much needed storage solution of the blades. When the blades are stacked in specific sections it doesn’t only de-clutters the workspace where the cutting is happening, but also provides ease of locating specific blades at the time of need.

Product description

The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts. The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; As well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting. The 5007MG includes a Makita 7-1/4” Premium Ultra-Coated Framing Blade with Advance Tooth Design. The "M" shaped tooth design features a two-pointed tip and two 10 degree bevel face to maximize cutting performance for a faster, cleaner and longer lasting cut. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is also ultra-coated to reduce heat and pitch build-up for faster, smoother cutting, with special Makita heat vents strategically set to dissipate heat and increase performance.

The Makita 7-1/4-Inch Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market.

• Magnesium components create a lightweight saw (10.6 pounds) that is well balanced and jobsite tough
• Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability
• Two built in L.E.D lights illuminate the line of cut for increased accuracy
• Large cutting capacity (2 to 1/2 inches at 90 degree) and bevel capacity (0 degree to 56 degree) with positive stops at 22.5 degree and 45 degree
• 1 year warranty

User questions & answers

Question:	Has anyone found a way to hook up a shop vac/dust collector to this
Answer:	This was the only disappointing aspect of buying this saw. I can't believe the way the exit for the dust is blocked by the guard handle. Really frustrating.
Question:	What is the cylindrical object that slides along the power cord for
Answer:	It supports the power cord from sharp bending and cracking of insulation around the wire and it also keeps the cord from pulling out of the saw!
Question:	Does it come with a case
Answer:	how can i get just the case for a makita 5007mg saw. if i can send a part no. an i will order it. send me a gmail back at robert. [email protected] thanks
Question:	Magnesium is flammable. It scares me that this circular saw is made of a flammable material. Has this circular saw caught fire on anyone
Answer:	Solid magnesium ignites at around 950°F. If the temperature in the vicinity of your saw is approaching a thousand degrees, you have bigger problems than worrying about your saw housing catching fire.

Product features

Makita 5007MG 7-1/4" Magnesium Circular Saw

The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.

Well-Balanced and Jobsite Tough

The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting.

Magnesium

Framers and carpenters need cutting solutions with power and performance - not extra weight. Makita circular saws with Magnesium components are engineered for less weight with superior balance and durability. Magnesium circular saws deliver consistent performance with less weight for cutting sheet and dimensional lumber.

Product description

This CRAFTSMAN 15 amp corded saw delivers the power needed to complete everyday tasks. The high performance 5, 500 RPM motor Is ideal for fast and aggressive cutting. Make accurate angled cuts with the 55 degree bevel capacity. This saw has a Spindle Lock mechanism for easy blade changes. With a premium grade magnesium shoe, metal upper and lower guard, This saw is made to withstand harsh jobsite conditions. The compact and lightweight design helps reduced fatigue while the contoured overmolded handle is optimized for comfort.

• High performance motor runs at 5, 500 RPM's for aggressive fast cutting
• 71/4inches 18T Carbide tipped blade with up to 21/8inches Capacity for 2x material
• Tool-free BEVELING shoe pivots up to 55 deg. For angled cuts with detents at 22.5 and 45 Degree for ease of use
• Magnesium shoe for durability and reduced weight
• Metal upper and lower guard for added durability
• Metal rafter hook for convenience
• Contoured overmolded handle for added comfort during use
• 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	I just purchased it on Sep 17th, 2020. I am trying to loose the bevel adjustment level but it does not move at all. Is there a lock on the lever
Answer:	Yes it has a lever you pull up to loosen then when you have it where you want it push it down to lock
Question:	Does this saw come with an edge guide
Answer:	The unit CMES510 does not come with an edge guide
Question:	How long is the power cord
Answer:	Cord Length (Feet) = 8
Question:	Where is it made at
Answer:	This is made in China

Product description

Makita’s 7-1/4-Inch Hypoid Saw (model 5477NB), combines a powerful 15 AMP motor and Makita’s efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts. The 5477NB is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a best-in-class 7-1/4-Inch hypoid saw. The 5477NB has a powerful 15 AMP motor with ball bearing construction for increased productivity. Makita’s efficient hypoid gears have greater surface contact and deliver more constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high quality heat treated hypoid gears for long lasting performance. The 5477NB includes a Makita 7-1/4-Inch General Contractor Framing Blade with Advanced Tooth Design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance.

Makita's 7-1/4-Inch Hypoid Saw, Model 5477NB, combines a powerful 15 AMP motor and Makita's efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts.

Hypoid Gears Deliver More Constant Power

The 5477NB has a powerful 15 AMP motor with ball bearing construction for increased productivity. Makita's efficient hypoid gears have greater surface contact and deliver more constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high-quality heat-treated hypoid gears for long lasting performance. The 5477NB has a large cutting capacity (2-3/8 inches at 90°, 1-3/4 inches at 45°, 1-9/16 inches at 50°) with a maximum bevel capacity of 0°-51.5° and positive stops at 45° and 51.5°, ideal for truss and rafter cut-outs. The large levers are designed for fast bevel and depth adjustments. In addition, the lower guard design improves performance when making bevel and narrow cuts.

Ease-of-Use Features

Ease-of-use features were also engineered into the saw. An over-sized handle and ergonomically designed rubberized grip provide improved control and comfort. The push button spindle lock and on-board blade wrench are designed for easy blade changes. The reinforced 10-foot cord is made for job site use, with externally accessible brushes for easy replacement and extended tool life. The base plate is chemically treated to resist rust and warping for superior cuts. The 5477NB includes a Makita 7-1/4-Inch General Contractor Framing Blade with Advanced Tooth Design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance. The 5477NB also includes a blade wrench attached to the saw for fast and convenient blade changing.

Engineered for a Range of Applications

The 5477NB is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a best-in-class 7-1/4-Inch hypoid saw. The 5477NB is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita's Power Tools

Cut after cut, Makita saws deliver power, performance and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.

About Makita

Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

Whats in the Box

Makita 5477NB 7-1/4-Inch Hypoid Saw, carbide tipped blade and wrench.

From the Manufacturer

The new Makita 5477NB Hypoid gear saw delivers more torque and power than traditional worm gear type saws. This allows the user to power through treated or wet wood because of its efficient technology. The ergonomically designed rubberized grip allows for better control. The oil bath technology and sealed gear housing provides a

• Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears.
• Powerful 15 AMP motor for increased productivity.
• Oil bath technology and sealed gear housing for less maintenance.
• 0º - 51.5º bevel capacity with positive stops at 45º and 51.5º is ideal for truss and rafter cut-outs.
• High quality, heat treated hypoid gears are engineered for long lasting performance.

User questions & answers

Question:	where is this made
Answer:	This pruning saw blade has very sharp and durable teeth, it cut pine tree like butter, very fast and easy!
Question:	How many pounds is the saw? I have to use it over my head for hours at a time
Answer:	It should fit all sawzalls
Question:	Can anyone tell me the HP on the saw
Answer:	It should
Question:	Has anyone tried this saw on concrete? If not, anyone have an opinion on using this saw to score a concrete slab? Thanks
Answer:	Should work just fine

Product features

Makita 5477NB 7-1/4" Hypoid Saw

Makita’s 7-1/4-Inch Hypoid Saw (model 5477NB), combines a powerful 15 AMP motor and Makita’s efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts. The 5477NB is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a 7-1/4-Inch hypoid saw.

The 5477NB has a powerful 15 AMP motor with ball bearing construction for increased productivity. Makita’s efficient hypoid gears have greater surface contact and deliver more constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high quality heat treated hypoid gears for long lasting performance.

The 5477NB includes a Makita 7-1/4-Inch General Contractor Framing Blade with Advanced Tooth Design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance.

Product description

The Bosch CS5 120-volt 7-1/4-inch circular saw is a tool for value-conscious professionals focusing on core user needs. The lightweight CS5 delivers 15 amps of power and a left-blade design for the clearest line of sight while cutting. The anti-snag lower guard lets you make cuts without having to advance the guard, even while making bevel cuts.

• Features enhanced line of sight, power, and durability
• Left-blade design
• Anti-snag lower guard
• Powerful 15 amp motor

User questions & answers

Question:	do any of the dewalt saws come with a laser
Answer:	The Ax is a great blade that is fantastic at cutting everything. I haven’t tried it on metal! It should have no problem with bamboo and it will last a long time.
Question:	Does this saw have a safety toggle switch
Answer:	At least 50, more if you don’t press too hard
Question:	the base on my cs5 is a 1/4 " off. does anyone know how to fix this
Answer:	EZARC wood pruning blade are made of Chrome vanadium with sharp teeth, which is great for trees and bushes pruning, it is definitely a very helpful wood sawing blade for your gardening works.
Question:	How does the left side design differ from a regular circular saw
Answer:	I think they are , good blades.

Product features

Bosch CS5 120-Volt 7-1/4-Inch Circular Saw,Bosch Blue

The Bosch CS5 left bade design saw is the fast cutting saw. Bosch quality for all jobsite environments and the best product at the right point. Featuring a powerful 15 Amp, high output motor, Bosch's CS5 7-1/4 In. circular saw offers fast, smooth cutting at a variety of different angles. Weighing in at just 10 Lbs., the Bosch CS5 is easy to handle and comfortable to use. An unobstructed view of the cut line means better visibility for more exact cuts.

Product description

Makita engineered the 7-1/4" Circular Saw (model HS7600) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, less weight, and job site durability. The HS7600 is a more compact saw that is ideal for a range of framing and cutting applications. The HS7600 has a powerful 10.5 AMP motor and weighs only 8.6 lbs. for a high power-to-weight ratio. It has a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The large cutting capacity (2-1/2" at 90Degree, 1-5/84" at 45Degree) with a maximum bevel capacity of 0Degree-45Degree is ideal for most common angles. Ease of use features include easy-to-read markings on the depth and bevel scales, on-board blade wrench, and a flat motor housing design for stability when changing the blade. The lower guard design improves performance when making bevel and narrow cuts. The HR7600 includes a Makita 7-1/4" 24T Framing Blade delivers faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The HR7600 is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4" circular saw with less weight and superior balance.

• Powerful 10.5 AMP motor deliver 5,200 RPM for performance and job site durability
• Large cutting capacity (2-1/2" at 90Degree, 1-5/8" at 45Degree)
• Well-balanced and lightweight (8.6 lbs.) for superior handling and performance
• Lower guard design improves performance when making bevel and narrow cuts
• Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts

User questions & answers

Question:	It is 50/60 hz
Answer:	I think so. I have a Ryobi and Sears saw and they work for both.
Question:	Does it come with case
Answer:	Go to the Milwaukee web site for this tool. Read the specifications. They are very clear. Accepts all Hackzall and Sawzall blades.
Question:	what is rip fence
Answer:	So its a saw blade! Just use it! It ain't cheese
Question:	Does this saw come with a case
Answer:	Yes they should fit as even in the description it states "1/2-inch tang fits all Sawzalls". And if you look at both brands the tang is exactly the same.

Product features

Makita HS7600 7-1/4” Circular Saw

Makita engineered the 7-1/4” Circular Saw (model HS7600) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, less weight, and job site durability. The HS7600 is a more compact saw that is ideal for a range of framing and cutting applications.

The HS7600 has a powerful 10.5 AMP motor and weighs only 8.6 lbs. for a high power-to-weight ratio. It has a heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. The large cutting capacity (2-1/2” at 90°, 1-5/84” at 45°) with a maximum bevel capacity of 0°-45° is ideal for most common angles. Ease of use features include easy-to-read markings on the depth and bevel scales, on-board blade wrench, and a flat motor housing design for stability when changing the blade. The lower guard design improves performance when making bevel and narrow cuts.

The HR7600 includes a Makita 7-1/4" 24T Framing Blade delivers faster, cleaner cuts. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood.

The HR7600 is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw with less weight and superior balance.

• Efficient and powerful motor: 12 Amps powerful pure copper motor windings, this circular saw can deliver full-size performance at 5,500 rpm to cut through tile, wood, metal panels, plastics and flooring in a single pass with accurate blade
• Adjusting depth of cutting and bevel angel: A depth fast and accurate adjustment lever allows for adjustment of the saw's base plate. Maximum cutting depth at 90 degrees is 62mm and at 45 degrees it is 46mm. 0-45° bevel tilt function
• Laser and rip fence: An adjustable fence for thinner cuts, with graduated ruler markings on the base and fence. The integrated adjustable laser allows following the line along the length; Circular saw equipped with a hex nut for blade replacement
• Integrated dust extraction: Powerful integral blower keeps the line of cut sawdust free; Dust extraction facility for maintaining a clean work area and keeps the cut line free of dust for improved visibility; Only 7.1 lbs. and reduce your fatigue
• What you get: Circular saw, 24-teeth TCT circular saw blade, rip guide, Hex key, dust blower, warranty Card

Product features

Powerful Cutting

This circular saw equipped with a pure copper 12Amp motor running at 5500 RPM delivers fast and powerful cutting on a wide range of materials.

GALAX PRO-A team specializing in the production of power tools, such as circular saw, mini circular saw, and so on. If you are a DIY lover, GALAX PRO is your right choice.

Flexible Adjustment

At 90 degrees the cutting depth can be adjusted from 0-62mm (2.45 inches), at 45 degrees from 0-46mm (1.81inches). Adjusts to any angle or depth within this range. This circular saw is more convenient for the user to cut materials with different depth. 0-45° bevel tilt function, perfect for mitre cuts, bevels, framing and edging.

Laser Guided

The integrated laser allows following the line along the length so novice and expert alike can saw perfect lines. More accurate and precision, do the perfect job!

Product description

For improved blade and cut line visibility the SKILSAW SPT67M8-01 left blade sidewinder, southpaw is ready for the job. With this 7-1/4 in. Circular saw users can see it all with the blade located on the left for improved accuracy. The 15-Amp saw features the best-in-class Dual-Field motor that provides reliability and with all-magnesium construction it keeps the motor cooler. The left blade saw can bevel up to 56 degrees with bevel stops at 0 and 45 degrees. Included with the SPT67M8-01 is a 24-Tooth carbide blade and multi-functional wrench.

• Left blade sidewinder improves blade and cut line accuracy and visibility
• All-magnesium construction reduces user fatigue and adds durability
• Powerful Dual-Field motor increases cooling and extends tool life
• Best-in-class torque improves productivity and increases speed of cut
• Motor Housing Material: Resin

User questions & answers

Question:	Does this saw use oil
Answer:	Probably, the mounting points are pretty standard across a wide range of reciprocal saws.
Question:	is it made in USA
Answer:	You would just flip the 1/4 round 180 degrees to make the opposing 45deg cut. It's a lot easier with a miter saw, but it can be done with this tool.
Question:	Does it really take 1 to 2 months to get it
Answer:	It did them just fine. The fence tightens down so that it doesn't move. I found that cutting the boards for length was a little less accurate and you had to adjust it a bit. But no problems with ripping. I didn't use the ripstick I just kept my hands on the edge of the fence and slid them through.
Question:	is blade included
Answer:	There is a dust bag that has a tube, not sure if is designed to hook a vacum up to it. The mess is probably depends on what you are cutting.

• 🎁Ideal Gifts for your Family🎁
• 🎁Great Circular Saw for DIY lovers and woodworking lovers.
• POWERFUL 12.5Amp SAW ▶ TECCPO 12.5A 1500W fine copper motor achieves 5500 RPM（revolutions per minute）in seconds, faster 130% than other circular saws. Low resistance feature of copper motor delivers less heat than general copper-clad aluminum motor, which will drastically extend your saw’s lifetime.Slice through laminate flooring, wood, plastics, PVC pipe and plaster board at ease.
• ADJUSTABLE CUTTING WITH LASER ▶ Legible laser beam assists you to cut a optimal straight line. Large cutting capacity ( 2-1/2”at 90°, 1-4/5”at 45° ) with a maximum bevel capacity of 0°- 45° is ideal for multi-angle cutting. Before using, you can set the angle knob and depth knob according to your requirements.
• SAFE & ECO-FRIENDLY ▶ Pressing power switch and guarded trigger together will minimize accidental start up. Meanwhile, this saw has a heavy gauge iron wraparound base and thickened aluminum upper cover for improved safety. The round dust blower allows connection to a vacuum, preventing you from the inhalation of dust and maintain a clean work area for you.
• VALUABLE ACCESSARIES ▶ The extra 7-1/4" 24T & 40T carbide tips are specifically set to withstand the harshest conditions and save your money. The teeth of blades is made of alloy TCT material that featured with high efficiency and low abrasion. Spindle lock for easy blade changes. The Scale Ruler helps you to carry out much more accurate craftwork.
• 100% CUSTOMER SATISFACTION SERVICE ▶ Buy with confidence! TECCPO offers 2-year Quality Promise. If you have any questions, please feel free to contact us. We will reply your message as soon as possible.

Product features

TECCPO TACS01P 7-1/4" 12A 5500 RPM Circular Saw

For experienced user who needs a powerful circular saw with advanced features，TECCPO TACS01P 7-1/4" 5500RPM circular saw is the right choice for craftwork. The 12.5A motor has forceful power and superior performance you need to cut lumber and sheet goods for a room decoration, deck and more. 2 pro-level anti-slip handles are specially designed to users for easy holding and steady operation. The 45 degree bevel gives a variety of cut options, please adjust angle and depth knob as your demands.

Fully Outlet of Sawdust

The round outlet of sawdust allows to hook up with a vacuum, sucking away all sawdust coming from the cutting. Keep you away from flying sawdust into eyes and clothes.

Reliable 360° Protection

Thickened all-aluminum upper cover and steel blade guard protect appearance and prevent accidents, which gives you reliability and security.

Economical Accessories

1* scale ruler corporate with laser guide for perfect precision. 2* carbide blades (7-1/4" 24T & 40T) for withstanding the harshest conditions.

Product description

The C7SB3 7-1/4" circular saw cuts quickly and smoothly through OSB 2x4's LVL plywood and other typical framing materials. This circular saw is lightweight at only 9 5 lbs but has a powerful 15 amp motor that produces 6, 000 no-load RPMs. The heavy-duty one-piece aluminum die-cast base features large easy-to-read scales on the front and side for accurate cuts. An integrated dust blower ensures a clear line of site and a clean work surface while cutting The non-slip soft comfort handle combined with all other features delivers a saw that is designed for comfortable use even over extended periods.

• INCLUDED: 7-1/4-in 24-tooth framing/ripping blade, carrying bag and hex bar wrench
• MOTOR: Powerful 15 Amp motor produces 6000 no-load RPM for smoother, faster, burn-free cuts
• AWARD: Named Best Corded Budget Circular Saw for Pros in 2020 by Pro Tool Reviews
• APPLICATIONS: Ideal for cutting OSB, 2 x 4k's, LVL, plywood and other typical Framing materials
• LIGHTWEIGHT: Weighing only 9.5 lbs for ease of use and less fatigue
• CUT CAPACITY: 1-7/8-in at 45 degrees and 2-7/16-in at 90 degrees
• DUST BLOWER: Clears work area for clearer line of sight

User questions & answers

Question:	Can you operate this with one hand? Or do you need both hands
Answer:	I have this saw at my cabin and it is about 4 hrs away, (so I can't tell you for sure, but likely Taiwan or China) BUT, when we were building the cabin, I had two Skil 77's and this Makita and everyone (real carpenters) went for the Makita. It's a good saw and does what you want it to do. Time will tell if it lasts as long as a 77, but it's great for bench work and trimming rafter tails 20' in the air. I would recommend buying this saw...
Question:	Is there voltage 220 V
Answer:	Its a heavy framing saw. Using it over your head is not recommended. Better off using a sidwinder for this. 6 1/2" skill is nice or a porta-cable 4" trim saw.Good luck!
Question:	Does this saw capable to cut metal and concrete as well. Are there blades that fit this saw to perform this task
Answer:	Volts x amps = watts. 745 watts = 1 HP. So 120 x 15 = 1,800 / 745 = 2.4 HP.
Question:	Does this saw have a laser
Answer:	I have not tried the saw on concrete partly because I love my Makita Hypoid Saw too much. I like to keep the sole plate in good condition. To score concrete, and by that I assume the asker is say score lines to encourage the concrete to crack in a score line not an uncontrolled place in the middle of the slab, I use a Ryobi Wet/Dry Saw with a 4" Diamond Blade. See http://smile.amazon.com/Factory-Reconditioned-4-Inch-Handheld-ZRTC400/dp/B0062M1HFC/ref=sr_1_2?ie=UTF8&qid=1396046393&sr=8-2&keywords=ryobi+wet+dry+tile+saw

Product features

MOTOR

Powerful 15 Amp motor produces 6000 no-load RPM for smoother, faster, burn-free cuts

LIGHTWEIGHT

Weighing only 9.5 lbs for ease of use and less fatigue

CUT CAPACITY

Makes the cuts you need to get the job done.

• 1-7/8-in at 45 degrees
• 2-7/16-in at 90 degrees

AWARD

Metabo HPT C7SB3 was named Best Corded Budget Circular Saw for Pros in 2020 by Pro Tool Reviews

DUST BLOWER

Clears line of sight and clean work surface while cutting

BEVEL ADJUSTMENT

Single handed bevel adjustment with small set screw to set the saw perfectly square

CORD HOLDER

Equipped with a cord holder to help reduce accidental cord cutting

DEPTH ADJUSTMENT

Single handed depth of cut lever for quick and simple adjustments

Product description

The award winning rip max 7-1/4 In. circular saw, model C7UR was designed for power and speed. It is 40% faster than previous models delivering an impressive 6,800 RPM! The rip max features a powerful 15 Amp motor, and is made with an all-metal body, stamped aluminum base and levers for added durability. No detail was overlooked; even the grip is designed using valuable input from end users on the jobsite. Professional angles are easily accessible with a bevel adjustment lever, which allows 0° to 55° bevel cuts.

• INCLUDES: C7UR circular saw, 7-1/4" 24T premium framing vpr blade, hex bar wrench, carrying bag
• POWER: Powerful 15 AMP motor with an impressive 6800 RPM no load speed for up to 40% faster cutting speed
• BEVEL: Capacity of 0 - 55 degrees, with positive stop at 0, 45, and 55 degree
• AWARD: Metabo HPT C7UR/C7URM RipMax Pro was named the Best Corded Circular Saw Overall in 2020 by Pro Tool Reviews
• CUT CAPACITY: 1-27/32-In at 45 degree and 2-3/8-In at 90 degree
• LOW VIBRATION: Innovative anti-vibration system for increased comfort and total control
• ERGONIC DESIGN: Handle designed closer to the blade for a more balanced and ergonomic feel

User questions & answers

Question:	Where can I find the rip fence for this saw
Answer:	Thank you for your question. The CS5 Circular Saw is Bosch's Product. It doesn't come with a laser though. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does this work with the metabo guide rail? guide rail fs
Answer:	Thank you for your question. The CS5 does not have a safety release button. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Is there a dust port attachment available
Answer:	Bosch has a good warranty and return policy. So does Amazon. If it is that far off, you need to send it back for warranty repair or replacement. If that's not practical or possible, I would really like to help you. I love this saw and use it every day. When you say it's a 1/4" off, you need to be more specific about it. For example, the left edge of the "base" or "shoe" as it's called, is parallel to, and exactly 1.5 inches from the left side of the saw blade. Using that dimension as a reference, in what way is the base of your saw a quarter inch off? Is the blade perpendicular to the bottom of the "base", and is it parallel to both left and right edges. I've dropped my saw many times with no damage or bad effect on the performance, but I suppose a really hard drop could cause that kind of mis-alignment. I am only speculating. It would be helpful if you could describe the problem in more detail.
Question:	Does this saw really weigh 16.22 pounds, as listed in the technical specifications? That is twice the weight of my previous saw
Answer:	Skilsaw designed the “Left” side blade saw back in the 1920’s. It was the first commercially successful saw so wouldn’t that make it the “Regular Circular Saw” ??? There is no such thing. Secondly NO the left side design is NOT for left handed users. Third NO it is NOT more dangerous in the event of kickback. This saw EXCELS for multiple reasons. First is it’s blade speed, it’s higher RPM produces cleaner cuts. The left side design is far more accurate to use for right handed users. The Construction Industry has used the Left Side Design as the mainstay in the form of the “Worm Drive” 7 1/4” saw for decades. If you are looking for a Top Quality Saw look NO further. This is the best finish Saw we have ever used and will never switch until they improve this one. I am sorry AZ540 but you are completely and utterly wrong !!!

Product features

POWERFUL MOTOR

15 Amp motor produces an impressive 6,800 RPM no-load speed.

BEVEL CAPACITY

0-55 degrees with positive stops at 0, 45 and 55 degrees.

DUST BLOWER

Clears the cutting path of dust and debris.

AWARDS

Metabo HPT C7UR/C7URM RipMax Pro was named the Best Corded Circular Saw Overall in 2020 by Pro Tool Reviews

SAW BASE

Stamped aluminum base includes scale and has a reinforced ribbing for durability and accurate cuts

HEX BAR WRENCH STORAGE

On-tool hex bar wrench storage for quick and easy blade changes.

CORD HOOK

Reposition the cord off to the side for cutting convenience

GRIP

Easy to grasp slim handle provides for comfort during extended use.

• Powerful saw: 10 A powerful motor generates no load speed 5800RPM to slice through laminate flooring, wood, plastics, PVC pipe and plaster board at ease
• Bevel and miter cuts: Not limited to making 0-degree cuts, the GALAX circular saw has multiple bevel and miter angles (0-45°), affording you the option of making your desired joint-forming cuts
• Adjustable cutting depth: This circular saw has a depth adjustment lever that releases to allow for adjustment of the saw's base plate, perfect for plumbing applications such as taking up old floorboards. Max cutting depth is 2-1/2" at 90°and max cutting depth is 1-5/8" at 45°
• Work safety: If you want to start up this circular saw, you need to press the lock-off button first, then press the on/off switch trigger; Double trigger strengthen the safety of operation and prevent accidental activation; And the plastic lower guard can be prevent users from accident danger
• Accurate cuts and dust blower: Parallel guide assist you for precise and accurate cutting; Dust blower exhausts the saw dust away from the operator and keeps the cut line free of dust for improved visibility; Hex key for quick and easy blade change

Product features

GALAX PRO 10A 5800RPM Hand-Held Circular Saw

Specification:

Amps: 10 amps;

Max Watts Out: 1200 watts;

Voltage: 120V/60HZ;

No Load Speed: 5800 rpm;

Bevel Capacity: 45 degrees;

Blade Diameter: 7-1/4 inches;

Depth of Cut at 90 degrees: 2-1/2'';

Depth of Cut at 45 degrees: 1-5/8";

Tool Weight: 8.74 pounds

Depth and Bevel Adjustment

The compact circular saw's base can be adjusted for depth of cut and can tilt up to 45°. Adjusting the depth of cut helps minimize kickback.

Application

In woodworking the term circular saw is most commonly used to refer to a hand-held, electric circular saw designed for cutting wood, PVC pipe, plaster board and MDF, but may be used for cutting other materials with different blades. We only provide wood blade.