8 best kobalt mitre saw

Product description

Stand supports provide convenient vertical storage Miter saw quick release mounting brackets allows easy and secure mounting of miter saw to stand Heavy duty 8-in wheels for easy mobility to and from the jobsite

• Durable steel structure supports up to 400-lbs
• Compact folding design for easy storage and portability
• Telescoping work supports extend up to 8-ft for added support

User questions & answers

Question:	Is this a full case or just 1 pk
Answer:	I don't think that's needed. Anything more than a week or two I would
Question:	How many square feet in cottonelle ultra cleancare toilet paper, strong bath tissue, septic-safe, 36 family+ rolls? deceptive not to put on package
Answer:	If you're looking at the battery head-on, yes it is.
Question:	i hate the skinnier rolls. Are these thinner than the old-size rolls
Answer:	Yes it will. We strongly advise our customers to have a certified technician to perform the product installation.
Question:	Is this cheaper than Costco's Kirkland brand
Answer:	This battery would not replaced the battery for your 2002, Yamaha YZF-R6, R6S. Instead, please check this https://www.amazon.com/dp/B01F5LSIPC?ref=myi_title_dp We strongly advise our customers to have a certified technician to perform the product installation.

Product description

Includes: 40 tooth carbide tipped saw blade, blade wrench, dust bag, safety clamp, retractable die-cast aluminum extensions, manual.

• Maximum crosscut up to 2 in x 8 in (nominal) at 90 degrees and 2 in x 6 in at 45, idea for molding and framing cuts
• Lightweight (under 23 lbs) for easy transport from storage to work location
• Miter cuts up to 50 degrees left and right with 9 positive stops at the most used degrees. Tool-less adjustable upfront mounted laser guide system projects accurate pre-cutting line for precise alignment. Tall, die-cast aluminum fence gives support during setup and cutting
• Powerful 10.0 Amp ball bearing motor, delivers up to 5,000 RPM for accurate cuts. Large, die-cast aluminum base and table for increased work support
• Bevel cutting up to 47 degrees to the left, positive stops at 0 and 45 degrees. Dual slide rail system with linear bearings allows for smooth and accurate operation

User questions & answers

Question:	Will it cut a 1x
Answer:	I think you have to ask
Question:	Is it battery operated
Answer:	That’s odd. We purchased two packs and they’ve been great. I’m not sure what the issue is. Amazon should take them back. Maybe switch to another torch?
Question:	What's the tallest cut it can take? Will it cut a 4x
Answer:	You fill this lighter with butane. Turn the lighter upside down. You will need to "burp" the lighter. Push the pin in on the bottom of the lighter. You will hear the air come out. The when you fill the lighter, it will fill much easier.
Question:	Will this cut a 4X
Answer:	They come full

Product description

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

• 10" Compound Miter Saw
• MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
• LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
• MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
• BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
• LARGE TABLE: Offers better material support with vice clamping system to secure work piece
• THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

User questions & answers

Question:	Does this take any 10” blade
Answer:	Yes, it will take any 10" blade with a 5/8" arbor.
Question:	does this come ready to use or is assembly required
Answer:	Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps!
Question:	Is the depth of cut adjustable
Answer:	Depth can't be adjusted on this model number. You will need a sliding compound miter saw.
Question:	According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too
Answer:	Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one.

Product features

45 Degree Bevel Range

To the left to provide clean and accurate bevel cuts

Horizontal handle

For a secure hold

15 Amp motor

Delivers high power for the toughest cutting jobs

Large table

for better material support with vice clamping system to secure work piece

Product description

Introducing the Deluxe Portable Miter Saw Stand by POWERTEC. This heavy duty workstation was designed to provide you with seamless and mobile integration with your miter saws and bench-top tools. From the compact size, to the high quality construction, and onto any of the many unique features this miter saw stand was made for optimal convenience for every professional contractor or DIY enthusiast. Heavy Duty Construction – Made with industrial strength round steel tubing for durability, and flaunts a 330 lbs maximum weight capacity to support your benchtop power-tools. Built-In 110V Power Outlet – Eliminates the inconvenience of having to place your bench top power tools in a location near a power supply. Spring-Loaded Locking Legs – Allows you to quickly set up or collapse the foldable miter saw stand, without complicated or lengthy instructions. Rolling Mobility – Equipped with eight-inch super grip rubber wheels that deliver optimal traction that won’t bog down into the soil. Compact Portability – Possesses a manageable 40lb weight and foldable design that allows you to efficiently store this cost effective unit at home or take it with you on the road. Universal Compatibility – Utilizing quick release adjustable mounting brackets, our miter saw stand accepts most 10” and 12” miter saws from all of the major brands. Additional Product Specs• Height: 31-7/8"• Width (extended): 79-1/4"• Outlet Input Voltage: 125V AC• Input Ampere: 15 Amps• Net Weight: 40 lbs. (18 kg) POWERTEC MT4000 can safely be stored, with or without a saw attached, in the horizontal position. A foot or bracket is not provided that would allow for vertical storage. However, with the saw removed, the stand can be stored vertically if supported or lashed.

• INCLUDES: Portable Miter Saw/ Planer Table
• FUNCTION: A hassle-free and practical workstation stand for miter saws, planers, chop saws and other bench top-tools
• FEATURES: Portable design with super-grip 8-inch rubber wheels, spring-loaded locking legs for easy set-up and break down, universal quick-release mounting brackets that work with most miter saw
• SELF POWER SUPPLY: Flaunts a convenient 110V 3-3 prong power strip along the lower base to eliminate the need of a nearby outlet for your power tools
• PREMIUM BUILD: Miter saw work station is made with high quality round steel tubing for superior industrial strength that supports a 330 lbs maximum weight capacity

User questions & answers

Question:	My miter saws leg bolts are 14.5 inches apart. Anyone know if my saw will work
Answer:	David L. Miller answered correctly. The slots on the arm accepts a 15 inch span. So measure the distance between the bolt holes from front to back on your saw and make sure they are 15" or smaller and you're good. I have used this stand extensively this year. Its well worth the money. Very sturdy.
Question:	I have a Makita 12 inch slide. Will this stand fit my saw
Answer:	It should there is a lot of adjustment on the clamp bars that bolt to the saw.
Question:	Will my Dewalt 10" and 12" miter saws work with the supplied adapters
Answer:	Yes it seems to fit just fine with my 10" Dewalt Miter that I have. I would guess the 12" would be fine as well.
Question:	What is the approximate width inside curve to inside curve of the clamping area? Ie. what width of stand will these clamps work on
Answer:	12" with adjustable clamp to 1". I use 3 different portahorse stands Black and Decker is a great stand for these clamps also Home Depot brand fold and travel, Menards also sells their own brand also I made my own stand for my work station. These clamps are great the handles on the sides make portability a major plus, they are a great value. I had purchased 4 sets to fit on my equipment.

Product features

The Deluxe Portable Miter Saw Stand by POWERTEC

This heavy duty workstation was designed to provide you with seamless and mobile integration with your miter saws and bench-top tools. From the compact size, to the high quality construction, and onto any of the many unique features this miter saw stand was made for optimal convenience for every professional contractor or DIY enthusiast.

Heavy Duty Construction

Made with industrial strength round steel tubing for durability, and flaunts a 330 lbs maximum weight capacity to support your benchtop power-tools.

Utilizing quick release adjustable mounting brackets, our miter saw stand accepts most 10” and 12” miter saws from all of the major brands.

Universal Compatibility

Possesses a manageable 40lb weight and foldable design that allows you to efficiently store this cost effective unit at home or take it with you on the road.

POWERTEC MT4000 can safely be stored, with or without a saw attached, in the horizontal position. A foot or bracket is not provided that would allow for vertical storage. However, with the saw removed, the stand can be stored vertically if supported or lashed.

Built-In 110V Power Outlet

Eliminates the inconvenience of having to place your bench top power tools in a location near a power supply.

Input Voltage: 125V AC

Input Ampere: 15 Amps

Spring-Loaded Locking Legs

Allows you to quickly set up or collapse the foldable miter saw stand, without complicated or lengthy instructions.

Rolling Mobility

Equipped with eight-inch super grip rubber wheels that deliver optimal traction that won’t bog down into the soil.

Product description

The DEWALT DWS779 12" Sliding compound Miter saw features a powerful 15 amp, 3,800 RPM motor that delivers extended power and durability. It has a super-efficient dust collection system that captures over 75 percent of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2x14 dimensional lumber at 90° and 2x12 at 45°.

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

Universal dust bag fits all Dewalt miter saws.

Keep your work area clean and clear for improved accuracy using the DeWalt DW7053 universal dust bag. This dust-collection bag is designed to work with all DeWalt miter saws to help you keep sawdust and other debris out of the air and your eyes while you work, along with keeping the kerf clearer so you can see what you're doing as you cut. It's tough to imagine, but this little accessory makes working safer and more enjoyable.

From the Manufacturer

DEWALT DW7053 Universal Dust Bag All DEWALT Miter Saws

• Universal dust bag fits all DEWALT miter saws
• Captures Sawdust to keep your shop and your work surface cleaner
• Prevents dust from catching in your eyes or collecting in the kerf

User questions & answers

Question:	does the dust bag for 704 & 705 does it work on a 703 miter saw
Answer:	Approximately one and one half inches (1 1/2") is the diameter of the dust discharge on my saw.
Question:	Dcs 571 Dust bag portable circular saw
Answer:	1 stand, if you want 2 you must purchase 2
Question:	I have a Craftman mitre saw (#234811) will it fit that
Answer:	I have a DW713 and use the DWX725B stand and it fits perfectly.
Question:	What is the inner diameter of the opening
Answer:	The saw attaches to the two arms that attach to the main beam. This stand is great; I am a dyi person and I use a roller stands to support the moldings. It folds up for easy storage.

Product description

Kobalt 24-volt max cordless combo kit includes 1/2-in drill/driver, 1/4-in impact driver, 24-volt max high-capacity Li-ion battery and charger.

1/2- in drill/driver features a long-lasting brushless motor that delivers up to 650-in-lbs of torque, 2-speed gearbox, variable-speed trigger and a keyless all-metal chuck

1/4-in impact driver features a brushless motor that delivers up to 1,800-in-lbs of torque, and electronic speed control with 3 speed settings (0-850, 0-2,000 and 0-2,700 RPM)

Accessories include 1 double-ended driver bit, 1 single-ended driver bit, 2 bit holders, 2 belt clips, auxiliary handle and contractor bag

Built-in LEDs on both tools illuminate your work space and increase accuracy

• Kobalt 24-volt max cordless combo kit includes 1/2-in drill/driver, 1/4-in impact driver, 24-volt max high-capacity Li-ion battery and charger
• 1/4-in impact driver features a brushless motor that delivers up to 1,800-in-lbs of torque, and electronic speed control with 3 speed settings (0-850, 0-2,000 and 0-2,700 RPM)
• 1/2- in drill/driver features a long-lasting brushless motor that delivers up to 650-in-lbs of torque, 2-speed gearbox, variable-speed trigger and a keyless all-metal chuck
• 1/4-in quick-release collet allows for fast bit changes
• Built-in LEDs on both tools illuminate your work space and increase accuracy
• 24-volt max 2.0-Ah Li-ion battery provides 50% more power and 3.6 times more runtime than Kobalt 18-volt tools

User questions & answers

Question:	Where are these made usa or china ? thanks
Answer:	These tools, battery and charger are all designed to operate with 120V.
Question:	Where is the led light located? in the base or the head of the drill
Answer:	Hello Juan Pablo Garcia Urdiales, The battery that comes in this kit is 1.2AH. Thank you for your inquiry!
Question:	Is this a refurb
Answer:	No, I don't remember a carry bag coming with the saw.
Question:	Is this for the 1/2 cordless impact 650lbs torque wrench?whats the warranty cover
Answer:	Yes.. the charger is incluid

Product description

Kobalt 24-volt max cordless reciprocating saw offers heavy-duty performance for pros and DIYers Brushless motor provides longer life, more power and extended runtime on a variety of applications Variable-speed trigger offers increased control and accuracy, and features a lock-off switch for added safety 1-1/8-in blade stroke and 0-3,100-SPM allow you to cut through materials quickly Tool-free blade change is quick and efficient LED work light provides visibility in low-light conditions

• Brushless motor provides longer life, more power and extended runtime on a variety of applications
• Variable-speed trigger offers increased control and accuracy, and features a lock-off switch for added safety
• 1-1/8-in blade stroke and 0-3,100-SPM allow you to cut through materials quickly
• Tool-free blade change is quick and efficient
• LED work light provides visibility in low-light conditions

User questions & answers

Question:	Do they make a carrying case for the Kobalt Reciprocating saw cordless 24v
Answer:	I don't think they do for the reciprocating saw. We used a zippered tool bag that we already had and it worked nicely plus it allowed us to add a couple of things.
Question:	Wat is included in the manuf warranty
Answer:	Unfortunately I cannot answer this one. Look up on mfr website. I purchased as a gift for my son. Have never had any issues with their power tools.
Question:	Does this come with any blades
Answer:	I don't remember there being any. Bought blades at Lowes.
Question:	does kobolt make a 80 volt sawsall
Answer:	No the 80v line is more for outdoor power equipment. Mowers, trimmers, leaf blowers etc.