12 best cordless impact wrench dewalt

Product description

The DEWALT DCF880HM2 20v MAX* Lithium Ion 1/2-inch Impact Wrench Kit features a compact (5. 70" front to back), lightweight (3. 4 lbs) design that fits into all kinds of tight areas. It has three LED lights with 20 second delay after trigger release, that helps to provide visibility without shadows. Also features a hog ring anvil to easily change sockets. Drive size = 1/2-inch square drive. The textured anti-slip comfort grip provides maximum comfort and control for the user. Powered by a XR Li-Ion battery with fuel gauge which provides 33% more capacity over standard packs. Applications include: Driving and removing fasteners in wood, metal or concrete/ Fastening and removing nuts and bolts/and Primarily for use with impact sockets . Includes: Fast Charger, DCB204 20V* MAX XR Premium Li-Ion Batteries (4. 0 Ah) and Kitbox. (*Maximum initial battery voltage - measured without a workload - is 20 volts. Nominal voltage is 18. ).

• Compact (5. 70" front to back), lightweight (3. 4 lbs) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Hog ring anvil to easily change sockets
• XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs

User questions & answers

Question:	What is the torque output
Answer:	There are 2 versions of dewalt 1/2 drive impacts I think I read this model is about 200 or 210 ft lb at lowes. The bigger version I read was 680 ft lb but amazon says it is 700 ft lb.
Question:	is it comes with 2 battery yes
Answer:	yes it comes with 2 battery's great little gun . JimBo
Question:	Can this strong to work on a semi tire
Answer:	Hi there, I'm not sure about that, but, I've been using this on a 2001 Ford Expedition, and I only use the Mid-Level 2 (for power strength); and it takes away very easy the wheel-bolts. This unit comes with 3 Levels, so, that may give you a hint of how strong this guy is. I hope this may help. Thank you
Question:	I want the 1/2 " hog ring impact, tool only
Answer:	I have seen both the 1/2 inch impacts 20volt on Amazon, not sure wich one your looking for.If you go on the dewalt website they list alot of bare tools there.I found the part number on the one I wanted and then searched Amazon again and found it quickly.I love the new tools,battery life is amazing and the short bodied driver fits almost anywhere.

Product description

The DEWALT DCF899M1 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil (4.0 Ah) features up to 700 ftpounds of MAX Torque and 1200 ftpounds of MAX breakaway torque. This tool has a compact design of 8 13/16" in length and weighs only 7.2pounds for ease of use. It also has multi speed control for a variety of applications (0 400/1,200/1,900 RPM). A heavy duty 1/2" Anvil with detent pin. An LED light with 20 second delay allows for increased visibility in dark or tight workspaces. Includes: DCF899 20v MAX XR Brushless High Torque 1/2" Impact Wrench with Dentent Pin Anvil, 20V XR Lith Ion battery (4.0 Ah), Fast Charger, Tool bag.

• Compact design and lightweight at only 7.2 pounds
• Heavy Duty 1/2 inch Anvil with detent pin
• Up to 700 feet pounds of MAX Torque
• LED light with 20 second delay for increased visibility
• Maximum Speed (RPM):1900

User questions & answers

Question:	using 1 of the 3 speeds ,is there anyway to set the torque to 100 ft-lbs
Answer:	The manual states that the maximum torque values for each speed are 100/300/700. So if you set it to Speed 1 then the maximum torque it will deliver is 100 ft-lbs.
Question:	Dofference between dcf899m1 and dcf899b
Answer:	Dewalt codes are as follows B = bare tool. No battery. C = Compact (1.5Ah) battery. D = 2Ah compact battery. L = 3Ah battery. M = 4Ah battery. P = 5Ah battery. T = 6Ah Flexvolt battery. X = 9Ah Flexvolt battery. DCF899 = Detent pin version. DCF899H = Hog ring version. So, DCF899M1 is detent pin with 1 4Ah battery. If you see something like DCF899HP2, that means hog ring version with 2 5Ah battery. Otherwise, whether it's DCF899B or DCF899M1 or DCF899P1, the tool itself is EXACTLY the same.
Question:	Is this a kit, or just the lone drill
Answer:	DCF899B is the DCF899 impact with a detent anvil sold as a (B) bare tool. DCF899HB is the DCF899H impact with a (H) hog ring anvil* sold as a (B) bare tool. DCF899M1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 4Ah battery, and a bag. DCF899P1 is the DCF899 impact with detent anvil sold as a kit with charger, one (1) 5Ah battery, and a bag. DCF899P2 is the DCF899 impact with detent anvil sold as a kit with charger, two (2) 5Ah batteries, and a bag. DCF899HP2 is the DCF899H impact with hog ring anvil* sold as a kit with charger, two (2) 5Ah batteries, and a bag *Difference between detent and hog ring: Detent holds socket more securely but must be put on so pin lines up with hole in impact socket & will need a small screwdriver or the like to release. Hog ring allows one to put on and pull off impact sockets by hand, though usually pretty difficult at first until broken in. Of course you should only use impact sockets/extensions If you put a hand socket (usually chrome) on a hog ring it will lock on and you will need a tool to get it off because the indentations are different. That's also a good way to break the hog ring, but if that happens they are cheap and easy to replace. Detents are usually more suited for situations where socket changes are infrequent like in a factory setting & hog rings for where frequent changes are needed like automotive work.
Question:	My boyfriend mentioned briefly he wanted a dewalt gun that apparently is so strong that he can change tires within minutes with it. could this be it
Answer:	Yes. This could be it. This is currently Dewalts newest and strongest cordless impact wrench. You might want to look for the one that comes with batteries and a charger if he doesn't have that already. Be mindful that this model comes with two variations: hog ring and detent anvil. Detent anvil holds the socket tighter but uses a tool (which is probably included)to change the sockets while hog ring holds the socket on with a split washer but doesn't require a tool. Great tool though with either option.

Product features

DEWALT DCF899M1 20V MAX XR Brushless High Torque Impact Wrench with Dentent Pin Anvil

The DCF899B 20V MAX* XR Brushless High Torque 1/2" Impact Wrench w. Detent Pin Anvil is powerful and versatile for fastening various applications. Designed for comfort, speed control, and working in dark spaces.

Features:

• Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torque
• Compact design of 8-13/16" in length
• Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM)
• 1/2" Anvil with detent pin (also available with hog ring)
• LED light with 20-second delay for increased visibility

Product description

The DEWALT 20V Max 1/2 Inch High Torque Impact Wrenches are designed for mechanical contractors, plumbers, automotive users, maintenance and repair professionals and remodelers. They are designed for professionals who demand a tool for difficult fastening applications, such as driving and removing fasteners, nuts and bolts in wood, metal and concrete. These impact wrenches deliver the power, durability and control they need to tackle the toughest tasks on the jobsite. They have 400 Feet/Pound of torque to perform a wide range of heavy duty fastening applications.

• 400-Feet Pound of maximum torque to perform a wide range of heavy-duty fastening applications
• Ergonomic handle provides user superior comfort and control
• Variable speed trigger with electric brake provides user improved control
• Durable magnesium gear case and all metal transmission for extended durability
• Bare tool, batteries and charger sold separately

User questions & answers

Question:	Is there a 18volt tool similar in torque value in the dewalt line
Answer:	no stay with 20v
Question:	How easy is it to remove a socket? Do you have to press the pin, or can you just pull it off? The hog ring version doesn't seem to be available
Answer:	I honestly think the hog ring is a solution to a problem that doesn't exist. Detente is better. Not hard to use at all. It won't wear out. The hog ring will be good for about a year.
Question:	can you use the battery 20v max lithium ion 1.5ah with this tool
Answer:	Yes 20V is all that matters. You can use any 20V Dewalt battery with any 20V Dewalt tool. Still the amp rating directly determines how long the battery will last. So using 1.5AH battery will only drive half as many screws/bolts compared to a 3AH battery before the battery is dead but it will still work.
Question:	Amazon lists the torque at 300 ft lbs while the DeWalt site lists it at 400 ft lbs. Which is it
Answer:	I'm not going to bulls#!t anyone. I never used this product, BUT typically the max torque of Impact Wrenches is in reverse. So maybe it's 400 ft.-lbs. in reverse and 300 ft.-lbs. foward? I don't know.

Product description

The DEWALT DCF880B 20-volt MAX Li-Ion 1/2-Inch Impact Wrench Kit with Detent Pin (Tool Only) is a compact tool that fits into tight areas. A part of the lightweight, yet powerful line of DEWALT 20-volt MAX products, this would be a great addition to any toolbox. Battery not included.

• Compact (5.70-Inch front to back), lightweight (3.4-Pound ) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Textured anti-slip comfort grip provides maximum comfort and control
• Battery & Charger Sold Separately

User questions & answers

Question:	Can the impact feature be turned off and on (i.e. to be used as just a drill for use in fine cabinetry work
Answer:	No it can not. It has a 1/2 impact socket tip on it that isn't removable. This tool was strictly designed to be used with 1/2 sockets.
Question:	What’s the difference between an impact driver and an impact wrench? I see Dewalt has both
Answer:	Impact drivers are usually smaller (using 1/4" hex drive) for driving in smaller screws. Impact wrenches are larger and deliver more power, and are usually 3/8" square drive and larger. Impact wrenches are usually for loosening and fastening large nuts and bolts. They both operate in a similar manner- they use rotational hammering action to twist the fastener. Compared to a traditional drill or ratchet that applies continuous force, impact drivers and wrenches are able to exert much more force by "pulsing" the force in a twisting fashion, in several short, but powerful blows. This results in less reactionary torque (tool trying to pull out of your hands), less stripped screwheads and much higher power- useful for driving long, or stuck screws/bolts.
Question:	Anyone know the max torque for this one? I'm tryna decide which one to get
Answer:	DCF880 has a max torque rating of 150 ft-lbs according to Dewalt.
Question:	whats the difference between hog ring and detent pin
Answer:	The ring offers spring tension to sockets to retain it on the drive and the pin offers another means of retaining socket on drive by locking into the hole on drive side of sockets. The pin works great to keep impact swivel sockects from flying off. However, they are harder to remove from drive of impact. You actually have to push the pin down to remove socket. Unlike the retaining ring, you would simply pull off.

Product features

DEWALT DCF880B 20-volt Li-Ion 1/2-Inch Impact Wrench Kit with Detent Pin

Comfortable to grip with a compact and lightweight design to reach tight spaces and increase productivity.

About DEWALT

DEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories, and more. DEWALT tools can be found nationally and internationally wherever tools are sold. With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.

Product description

The DEWALT DCF894B 20V MAX* XR ½ in. Mid-Range Cordless Impact Wrench with Detent Pin Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space. This is a bare tool; battery sold separately. 3 Year Limited Warranty, 1 Year Free Service Contract, 90 Day Money Back Guarantee.

• Up to 330 ft lbs max of fastening torque at only 3.48lbs
• Features precision wrench control. In forward the tool will pause before impacting to help prevent overtightening. In reverse the tool lowers speed when fastener is loose to help prevent run off
• 3 mode settings to complete a variety of applications
• Dewalt built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894B 20V max* XR 1/2 in. Mid range cordless impact wrench with detent pin anvil (tool only)
• Variable speed trigger helps to provide speed control

User questions & answers

Question:	Can I use a 20v 6.0ah flex volt battery with this
Answer:	Too heavy? That's like saying steel toed boots are a lot heavier than non-steel toed boots. There's only ounces of difference even over a long amount of time.
Question:	How does the detent pin feel on this model? I had an older 18v model and the detent pin made it such a pain to get the sockets off
Answer:	The detent pin is the one flaw of this impact. Mine started sticking so it wouldn’t hold a socket very well after a week. I replaced the anvil with a hog ring. Super easy to do and it cost less than $20. Great deal considering the difference in price for the tool with the detent vs hog ring was $80
Question:	Is this item good enough for replace the car tires SUV
Answer:	Yes. I easily replace all the tires on my old Dodge Ram with it. It has plenty of power even for old rusty bolts. It doesn't take a lot of power so you can use small batteries to keep the gun lighter.
Question:	Does this model hold sockets or is that the other model with the hog ring
Answer:	This model is with the pin which is great. If you want the socket to hold very strongly because you will do a lot of the same size bolts, you align the pin of the gun with the hole in your socket (only one side out of the 4). If you have a job to do where you must change sockets size often, then you don't align the pin of the gun with the hole of the socket (the other 3 sides) which makes the sockets a lot easier to take off because the pin doesn't snap in place. You have the best of both worlds.

Product description

The DEWALT DCF889M2 20v MAX* Lithium Ion 1/2-inch Impact Wrench features 400 ft.-lbs of maximum torque to perform a wide range of heavy-duty fastening applications. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This unit has a variable speed trigger with electric brake that provides user improved control. Also, the LED light provides user greater visibility when working in dark environments. It is enhanced with a durable magnesium gear case and all metal transmission for extended durability. Drive size = 1/2" Square drive/Anvil type = Detent Pin. Applications include: Driving and removing fasteners in wood, metal or concrete along with fastening and removing nuts and bolts. Includes a Fast Charger, DCB204: 20V* MAX SR Premium Li-Ion Batteries (4. 0 Ah) and Kit Bag. (*Maximum initial battery voltage - measured without a workload - is 20 volts. Nominal voltage is 18. ) and it includes 2 batteries

• 400 feet pounds of maximum torque to perform a wide range of heavy duty fastening applications
• XR Li Ion batteries with fuel gauge provide 33 percent more capacity over standard packs
• Variable speed trigger with electric brake provides user improved control
• Anvil Type: Detent Pin. Impacts per minute is 0 2300

User questions & answers

Question:	Wnat is the backwards torque
Answer:	Same torque rating backwards and forward.
Question:	The wattage of the charger? 50W or 60W
Answer:	Neither. If you mean is the required input 50 Hertz or 60 Hertz--the answer is 60 Hertz.The given input specs are 120 volts x 1.5 amps = 180 wattsIf you want to know the charger output, that rating is measured in amps and it is 4.0 amps.If by some chance you really want to know how many watts the charger consumes, the formula is volts x amps=watts....so 120 volts x 1.5 amps = 180 watts
Question:	Could this be used for an oil change
Answer:	it would depend on what you are talking about. if you are considering using it to remove and install the drain nut i highly recommend that you stay with a trusty wrench, to tighten and loosen the drain nut.
Question:	Did the unit come with one or two Ion Batteries?. The page displays two baterries
Answer:	Two batteries. We love this tool.

Product description

The DEWALT DCF894P2 20V MAX* XR ½ in. Mid-Range Cordless Impact Wrench with Detent Pin Anvil delivers up to 330 ft-lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control, which helps to prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space.

• Up to 330 ft-lbs max of fastening torque at only 3.48lbs
• Features precision wrench control. In forward, the tool will pause before impacting to help prevent overtightening. In reverse, the tool lowers speed when fastener is loose to help prevent run-off
• 3 mode settings to complete a variety of applications
• Dewalt-built Brushless motor for increased efficiency and runtime vs. Brushed DEWALT DCF894P2 20V max* XR 1/2 in. Mid-range cordless impact wrench with detent pin anvil kit
• Variable speed trigger helps to provide speed control. Impacts/Minute: 0-3100 IPM

User questions & answers

Question:	Hi good night! comes with 2 batteries and charger
Answer:	Great saw. Not a toy like the 18 volt ones. Definitely a great tool for the quiver. The battery does run down pretty fast. If you are framing and ripping all day long you will need three batteries and two chargers. I'm not sure about the 9 amp hr battery. Perhaps one of each will be enough or 2 9s would be the answer. My remodeling co is doing fine with one grinder, one saw and two 6 amp hr batteries. Don't even stock my corded saw in the truck any more.
Question:	interchangeable battery with other dewalt products
Answer:	made in china
Question:	Can you adjust the torque on this? Is this adjustable torque
Answer:	I love all my DeWalt Tools: drills, saws, and nailers. But, if you want a fantastic saw with the blade on the left without compromising on power and accuracy on your cuts, check out DeWalt's "wormdrive" saw. It's very powerful, accurate, and smooth cutting. You can easily keep your cut line in view throughout each cut. For that power it does require the cord. You have to decide what you want to trade off on; power or convenience of cordless. On a side note, Skilsaw makes a great lightweight magnesium high quality worm drive saw with plenty of power. It costs a little more than the deWalt. Please note I have not owned or used the Skilsaw, but it has a diehard following of contractors and framers.
Question:	What all does this kit come with
Answer:	Pen Name answered the best. This is most certainly a right hand saw-a two hand saw like any corded right blade sidewinder. I grew up working in construction on the west coast doing framing, trim work but mostly siding. We used the right side blade circular saws for everything. For siding we used them for ripping, some crosscut and general cutouts around windows and doors. I could rip a 16 foot piece of siding from end to end without looking at the material other than to start the rip. You just use your left hand holding the base plate and your finger against the material as a guide. You can't do that with a left side blade saw. Since then I have used cordless left side circular saws for more than 20 years. I'm used to them and prefer them but they are mostly a one hand saw. This 7 1/4" saw is just a cordless version of the corded right side sidewinder. And Dewalt makes a left side blade circular saw that is basically a cordless worm drive if you need that bid of a saw to have the blade on the left side.

• Compact (5.70" front to back), lightweight (3.4 lbs) design fits into tight areas
• Three LED lights with 20 second delay after trigger release, provide visibility without shadows
• Hog ring anvil to easily change sockets
• Same runtime and power in a lighter, shorter Package compared to DCB200
• No memory and virtually no self-discharge for maximum productivity and less Downtime
• 3 LED fuel gauge to quickly check state of charger on battery

User questions & answers

Question:	Wat is the torque
Answer:	FlexVolt means that the batteries and chargers are interchangeable with Dewalt 20V. However, it does not work both ways. You can use a FlexVolt battery on a 20V tool and charger, but you cannot use a 20V battery on a FlexVolt tool. Be advised that using a 60V FlexVolt battery on a 20V will not allow it to run at 60V, but the AH will triple, so it will have a longer run-time. A 2AH 60V FlexVolt battery will perform like a 6AH 20V battery.
Question:	What is tork or foot pounds of force
Answer:	Weight- Saw: 10.87 lbs DCB606: 2.25 lbs DCB609: 3.45 lbs DCB612: 3.4 lbs
Question:	How much ft/lb torque does this have
Answer:	LOOKS LIKE AROUND NOVEMBER 1, 2017, IF WE ARE LUCKY!
Question:	what country is this made from
Answer:	Metal

Product description

The DEWALT DCF890M2 20V MAX* XR 3/8" Compact Impact Wrench Kit features a DEWALT built brushless motor for increased efficiency and runtime. It is compact and ergonomic with only 5.5" head length and 2 lbs (tool only), and has a variable speed trigger which provides additional control. This Impact wrench offers 3 LEDs which illuminate your work area, along with a belt clip to keep your tool handy for additional ease of use. Backed by DEWALT's 3 year limited warranty. Includes: DCF890 - 20V MAX* XR 3/8" Compact Impact Wrench Tool, DCB204 - 20V MAX* XR Lith Ion Batteries, DCB115 - Fast Charger, Belt Clip, Tool Bag.

• DEWALT built brushless motor for increased efficiency and runtime
• Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)
• Variable speed trigger for added control
• Compact and ergonomic
• 3 LEDs provide visibility in darks areas of jobsite

Product description

This cordless kit includes one 3/8 in. impact wrench, two 12V MAX* 2Ah batteries, charger, and tool bag. This cordless impact wrench is designed for hard to reach applications requiring fighting or loosening of nuts and bolts. At only 5. 1 in. long it is packed to perform with 1, 500 in-lbs. of fastening torque and 2, 400 in-lbs. of breakaway torque. It also features 3 LED lights positioned on the nosecone to illuminate work areas. This impact wrench is equipped with a 3-mode switch with Precision Wrench trade; to help prevent overtightening and run off.

• Dcf902 12V max* Brushless 3/8 in. Impact wrench is 30% shorter**
• Brushless motor for maximum runtime and durability
• 3/8 in. Square drive
• 3 mode settings including Precision Wrench trade; for control in a variety of applications
• 3 LED lights for illumination onto work surface

User questions & answers

Question:	is this have 2 3.0 ah batteries
Answer:	2ah batteries The 3ah batteries are sold separately
Question:	This is good for remove wheels
Answer:	It is generally recommended to have at least 100 FT-LBS of torque in order to remove most lug nuts for a tire. This unit has 200 FT-LBS of torque so removing lug nuts on wheels should not be an issue.
Question:	Are this special (smaller) batteries
Answer:	This is our 12v Max set and impact. These are only comptable with other 12v Max products. The 2.0 Ah batteries are not the compact models, and are the new 12v Max standard size.
Question:	Would I be able to use one of my 20v battery on this tool if i had to
Answer:	While it may physically clip in (but I haven’t tried), I’m sure the 20v battery will cause damage to the 12v motor/circuits. I wouldn’t recommend it.

Product description

EXPAND YOUR SYSTEM with the 20V MAX XR 2-Tool Combo Kit including a 1/2 in. Mid-Range Impact Wrench and 3/8 in. Compact Impact Wrench. This kit also includes one 20V MAX XR 5Ah battery and an 8 Amp Fast Charger with 2X the charge rate (vs. DCB115).

• Premium XR 2-kit includes a DCF894 1/2 in. Mid-Range Impact Wrench and DCF890 3/8 in. Compact Impact Wrench
• DCF894: Up to 330 ft-lbs max of fastening torque and 600 ft-lbs of break away torque at only 3.48lbs
• DCF894: Compact and lightweight design for comfort when working in tight spaces
• DCF894: Prevent over-tightening and run-off with Precision Wrench Control
• DCF890: Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)

User questions & answers

Question:	Do they make an adapter that will fit on my 1/2" impact wrench and take me down to a 3/8" drive that I can use with my bolt extractor kit
Answer:	There is not a 1/2 to 3/8th adapter for the impact wrench DCF894
Question:	Manejan sistema de escobillas o son de última tecnología que ya no las tienen
Answer:	Both the mid range impact wrench and the compact impact wrench have brushless motors.
Question:	What is the foot pound of toque
Answer:	The foot pound torque DCF894 330 ft-lbs and DCF890B 150 ft-lbs
Question:	Is it a hog ring or anvil
Answer:	Model DCF894 is a anvil

Product features

About Us

Raymond E. DEWALT followed in his father's steps, and worked in plants and construction after leaving school. In all fields of work he encountered the issue of high labour costs. To help reduce these costs, whenever possible he installed a machine to handle specific needs.

One fine day, M. DEWALT was hired to head a wood mill, manufacturing numerous products, from basic boxes to complete houses. The amount of work exceeded the company's capacity by far, but its owner could not afford to increase the headcount. The only solution was to ensure his men produced more work. M. DEWALT built a yoke, which he connected directly to a motor and a saw. He then fitted it onto a standard arm. The saw could be raised, lowered, moved forward and backward, and adapted to all types of angles. With this system, he could handle the same amount of work as four men, reducing labor costs beyond his wildest imagination.

Product description

The DEWALT DCF890B 20V MAX* XR 3/8" Compact Impact Wrench (Baretool) features a DEWALT built brushless motor for increased efficiency and runtime. It is compact and ergonomic with only 5.5" head length and 2 lbs (tool only), and has a variable speed trigger which provides additional control. This Impact wrench offers 3 LEDs which illuminate your work area, along with a belt clip to keep your tool handy for additional ease of use. Torque = 150 lbs - Ft. This is a baretool item - battery sold separately. Backed by DEWALT's 3 year limited warranty. Includes: DCF890 - 20V MAX* XR 3/8" Compact Impact Wrench Tool, Belt Clip.

• DEWALT built brushless motor for increased efficiency and runtime
• Compact and ergonomic with only 5.5" head length and 2 lbs (tool only)
• Variable speed trigger for added control
• Power Tool Type : Cordless
• 3 LEDs provide visibility in darks areas of jobsite
• Battery & Charger Sold Separately

User questions & answers

Question:	Does dewalt make this brushless version with a 1/4 anvil
Answer:	I would say a legitimate torque that this tool can reach is 100ft.lbs. maybe 105-110 at a full charge... maybe
Question:	Is this impact made in the USA
Answer:	Yes
Question:	Does it come with battery & charger
Answer:	Like max fiveish pounds
Question:	Does this model have the pin anvil or hog ring anvil
Answer:	Hi! The GDR18V-1400B12 Impact Driver Kit comes with one 18V Lithium-ion 2.0 Ah SlimPack battery, model number BAT612. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.