12 best tool rests for wood lathes

Product description

Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results; Upper support rod will not nick or scratch. Post on all four toolrests is 5/8" diameter (15.875mm). S-curve toolrest has 11" span with 3" long post with overall vertical length of 4". 1-1/2" radius J-curve toolrest has 8" span with 2-3/4" post and overall vertical length of 4-1/4". 2-1/2" radius toolrest has 6-1/2" span with 3" post and overall vertical length of 4-1/4". 2" radius toolrest has 6-3/4" span with 2-1/2" post and overall vertical length of 3-1/2". Reach far into the interior of bowls with ease; Use for bowl exterior, interior hollowing, deep penetration, and sharp corners.

• Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results; Upper support rod will not nick or scratch
• Post on all four toolrests is 5/8" diameter (15.875mm)
• S-curve toolrest has 11" span with 3" long post with overall vertical length of 4"; 1-1/2" radius J-curve toolrest has 8" span with 2-3/4" post and overall vertical length of 4-1/4"
• 2-1/2" radius toolrest has 6-1/2" span with 3" post and overall vertical length of 4-1/4"; 2" radius toolrest has 6-3/4" span with 2-1/2" post and overall vertical length of 3-1/2"
• Reach far into the interior of bowls with ease; Use for bowl exterior, interior hollowing, deep penetration, and sharp corners

User questions & answers

Question:	Can I use this to turn small bowls,on a nove 2. the the one that came with it is all chewed up
Answer:	The overall length is 26". The handle including the ferrule is 17".
Question:	Psi website shows this in stock, but amazon says it takes a month to ship?! which is correct
Answer:	It’s a U shape. Very nice tool. Holds an edge wonderfully.
Question:	I have a laguna revo 12|16 lathe will these fit
Answer:	Buying the sanding pads is easy but I will suggest you try to buy extra Velcro heads. The foam backing does ware out after a while and they are difficult to find on their own.
Question:	Will these work with my harbor freight central machinery lathe
Answer:	Just search Flocking Sandpaper on Amazon.

Product description

3-Piece 5/8-Inch diameter post Tool Rest set. Includes 6-Inch, 9-Inch and 12-Inch long steel rests. Made with a 5/8-Inch diameter tool post Constructed from solid steel bars. Fits into most MIDI lathe tool rest mounts. Three convenient widths for vibration free turning.

• Heavy duty, solid round bar 3pc tool rest set provides ultimate chisel control for lots of different woodturning projects
• Smooth, dense steel surface allows the tool to glide over the bar for vibration-free turning
• Post on all tool rests is 5/8" diameter (15. 875mm) and 2-3/4" long
• The included toolrests have top bar lengths of 6", 9", and 12"
• Round top bar is also 5/8" diameter

User questions & answers

Question:	Does it fits rigid w
Answer:	They are the standard diameter to fit most wood lathes. Ed
Question:	Why do you not make this tool rest in a 1" diameter post
Answer:	I agree that this might be a good idea; however, since PSI has a clientele that primarily focuses on pen turning, a 1" post would be overkill. I actually made a 1" collar about 2" long with a below flush sets crew that I can tighten up on the tool rest. Then the tool rest with the collar attached will fit in and tighten up like it should. I know this didn't actually answer your question, but I do hope it helps!
Question:	Anyone know if this fits in the HF Item#34706 wood lathe with the 33" bed
Answer:	I don't know if they will fit, these are 5/8", so I would suggest you measure your current post size. Also, these are definitely not worthless. I abandoned my Jet tool rest and use only these now. I guess it's personal preference, but I like the round bars. They tend not to pit because the pressure is spread across a larger area.
Question:	How long is the post
Answer:	The post is just long enough for my Jet 1221VS lathe. These are kind of cheap and you would be better off to spend more money and buy the 2 piece rests.

Product description

Description:

Brand New And High Quality.

Features:

Made Of Cast Iron,Rod Will Not Nick Or Scratch Giving.

Wear-Resistant, Anti-Rust, High Hardness, Has A Long Service Life.

The Shank Diameter Is 16MM.

Tool Rest Is Suitable For 16MM Diameter Tool Rest Base.

Specifications:

Material:Cast Iron

Size:300MMX75MMX16MM(11.8"X2.95"X0.63")

Color:Black+Silver

Package Include:

1PCS X Tool Rest

Note:

1. Please Allow 1-3 CM Error Due To Manual Measurement.

2. As Different Computers Display Colors Differently, The Color Of The Actual Item May Vary Slightly From The Above Images, Thanks For Your Understanding.

• Made Of Cast Iron,Rod Will Not Nick Or Scratch Giving
• Wear-Resistant, Anti-Rust, High Hardness, Has A Long Service Life
• The Shank Diameter Is 16MM
• Tool Rest Is Suitable For 16MM Diameter Tool Rest Base
• Material:Cast Iron

Product description

Turn and support your long slender spindles while eliminating bowing and vibration. The Stead-Fast Steady Rest adapts to any split bed or double rail midi lathe for ultimate control of delicate spindles. Easy installation. Mounts in the channel of any split bed or double rail lathe. When mounted, it sits 12. 75" high from top of lathe bed. Includes all necessary hardware and wrench. non-marking wheels apply multi-point ball bearing spindle support. Adjustable wheel placement allows for spindle support for workpieces down to 1/2" diameter. Great for lots of woodturning projects like baseball bats, table and chair legs, and other long spindles.

• Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2".
• 3-point ball bearing spindle support.
• Non marring soft wheels.
• Mounts in the channel of any split bed or double rail lathe.
• Compatible with Jet, Delta, and Turncrafter Pro Midi lathes with extension beds.

User questions & answers

Question:	Horizontal thickness. Yes, normally goes on the top of the bed. My bed is round, so it would have to go under the bed with 0.5" clearance
Answer:	Yes, it's a one piece unit
Question:	Will this fit my Rikon mini lathe
Answer:	No, it has a #1 tapered shank. Good only for drill press or lathe.
Question:	Will this work on a Delta
Answer:	Yes, the drill chuck has JT 6 mount (Jacobs Taper 6) on the back and the shank is MT2 to JT6.
Question:	What is maximum? I'll guess and say 6 inches
Answer:	If it is MT2 the dia of the spindle hole of the drill press shall be 0.70".

Product description

Midi inboard French curl tool support.

• Midi inboard french curl tool support
• Port Size: 5/8 in.

User questions & answers

Question:	what size is the post
Answer:	It fits my Jet 1014vs I can't seem to find the size and I am not home to measure, I want to say 5/8". It was a tight fit when I first got it so I polished up the post with varying grades of sandpaper and now it is shiny and fits perfect.
Question:	Is it a 5/8" post
Answer:	Yes, post is 5/8". I would not purchase this support though. I had one that fractured at the top of the post during turning and it was a miracle that I was not injured. The piece is made of cast iron and is very brittle. Any catch on the lathe while turning risks the chance of breaking just like mine did.

Product description

Robust 9" Small "J" Curved Curved Tool Rest, Long Post

Robust Curved Tool Rests help you follow the curve of a conventional open bowl. Both and Interior and Exterior style if available. Sizes are available to fit most 16-25" lathes. The straight-line overhang of the interior rest is about 9.5". Straight line overhang of the exterior rest is about 5.5". The radius of both rests is the same, about 8".

Features:

• Small "J" Curved Rest - 9" Wide - 1" Diameter - Long Post
• Robust Tool Rest are made from solid steel. Each Tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Sold as tool rest only, lathe banjo not included.
• Fits Oneway 2436, 2416 | Powermatic 3520C, 3520B, 3520A, 4224 | Robust AB25 | General 20" Lathes

Robust tool rests are the finest tool rests ever designed for woodturning. In our opinion, there is no better and more economical way to upgrade your lathe's performance than to purchase a set of Robust tool rests. Robust tool rests have a proprietary hardened steel rod as the tool rest surface that provides a smooth surface which will never ding, nick or need filing. Your tools will glide effortlessly across the rod whether it is a straight style, curved style or the unique "J" style. Robust tool rests are offered in dozens of variations to accommodate just about every lathe on the market as well as your own turning style.

• Small "J" Curved Rest - 9" Wide - 1" Diameter - Long Post
• Robust Tool Rest are made from solid steel. Each Tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Sold as tool rest only, lathe banjo not included.
• Fits Oneway 2436, 2416 | Powermatic 3520C, 3520B, 3520A, 4224 | Robust AB25 | General 20" Lathes

User questions & answers

Question:	Will this item work on a Nova 1624 lathe? Which post length is appropriate
Answer:	I have a Nova DVR/XP. The height from top of lathe bed to center line on my lathe is 7-7/8 inches. I ordered the "long" 9 inch J-Rest ... overall height of this long J-rest is 6-5/8" from bottom of post to top of rest, which is just right for my lathe. Here are the Robust specs on their tool rests, including the 9 inch J-rest ... http://www.thewoodturningstore.com/images/Robust_Tool_Rest_Dimensions.pdf
Question:	Is there any reason this couldn't be used on the outside also
Answer:	no reason whatsoever.....But TAKE NOTE ....... it will NOT fit on a "metric" banjo..............
Question:	Hi, Is the post actually 1in diameter as indicated in the description or is it 5/8? When I go to the wood turning store website they indicate 5/8in
Answer:	The post on mine is 1", but it is probably also available in 5/8". Fine piece of equipment BTW. Bill
Question:	My grizzly g0642z stock tool rest is 6" tall....from the bottom of the 1" post to the very top of the rest. which size do i need? thanks in advance
Answer:	The 9” J curve tool rest is 6 1/2” from top to bottom. When you say stock to rest are you referring to the banjo? That’s the part that holds the tool rest?

• Designed specifically to reach the material inside a hollow form vessel that cannot be reached with straight shaft tools.
• The Simple Swan Neck Hollower can be used with a the interchangable handle, the hollowing system or your custom made handle.
• American made in Ramsey, Minnesota by Harrison Specialties, a family owned and operated CNC Machine shop
• Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor (not possible with round shaft tools)
• Both beginners and experts alike will appreciate how simple it is to complete hollow forms with this tool.

User questions & answers

Question:	will this tool hold a Ci0 size cutter tip? which I believe is 0.65 x 0.3 x 0.65 inches. Will the same screw work...or is this tapped differently
Answer:	We do not have a Ci0 cutter here to try on it, however I believe that cutter will be too large for this tool. We machine this tool to accept a 9/16" OD round cutter. I don't believe the Ci0 cutter will seat properly or line up with the screw hole, as it appears to be too large. Thanks!
Question:	What is the diameter of the carbide cutter? Does it use the same diameter as the simple shear finisher
Answer:	The diameter of the cutter on this tool is 9/16". It is not the same cutter as the Simple Shear Cutting Finisher, nor will that cutter work on this tool. The cutter for the Simple Shear Cutting Finisher needs to be presented to the work at an angle, which is why that tool has a round shaft. This tool has a square shaft and is machined to only will accept the 9/16" round flat top cutter that comes on it.
Question:	Will this font in my rikon handle
Answer:	This tool has a 1/2" dia x 2.5" length round handle tang. If your Rikon handle accepts 1/2" round then it should work. We are not familiar with Rikon handles so we do not know for sure.
Question:	what is the shaft diameter
Answer:	This tool is 1/2" square. The handle tang is 2.5" long x 1/2" round so it fits into a handle that accepts 1/2" round tang.

Product features

Using the Simple Swan Neck Hollower with a Handle (handle sold separately):

1. Position the tool rest so the curved portion of the tool will not contact the tool rest when the tool is inside the vessel. In other words the curved portion of the tool should be hanging over the tool rest. This positions the tool rest farther away from the vessel then would be normal with other tools. The reason for this is to prevent rotational, or twisting force on the tool as would be the case if the curved portion is in contact with the tool rest. Notice the center of the cutter is inline with the center of the straight portion of the tool. If the tool is positioned properly on the tool rest it will work just like straight shaft tools with no more twisting felt in the handle then when cutting with the side of a cutter on a straight shaft tool. However, since the tool is always extended over the tool rest we recommend only light cuts be made with this tool. Also this tool is designed for the final hollowing only and should not be used for the entire hollowing process. Straight shaft tool should be used for as much of the hollowing process as possible because the tool rest can be positioned close to the work with those tools.
2. Adjust the tool rest height so the cutter is at the lathe vertical center line.
3. Place the tool on the tool rest with the tool shaft parallel with the floor.
4. While securely holding the tool handle carefully move the tool into the vessel and carefully hollow out the portion that can not be reached with your straight shaft tools.

Simple Swan Neck Hollower technical details:

• Overall tool length: 12"
• Tool Shaft: Solid stainless steel 1/2" square
• Handle tang: ½" diameter x 2½" length

Ready to Begin Right Away

• Super sharp carbide cutter: 9/16 diameter - Flat top cutter
• Multiple Sharp Edges
• Cutter comes installed on each tool.
• T20 Torx star tip wrench included.

Tool Engraving Simplifies Cutter Selection

Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple!

• Authentic Simple Woodturning Tools - replacement cutter for Simple Swan Neck Hollower OR Simple Turner & Hollower (fits tools engraved with SSNH & STH)

Using the Simple Swan Neck Hollower with the Simple Hollowing System:

1. Mount the tool in the hollowing system tool holder.
2. Position the tool rest as close to the work as possible.*
3. Adjust the tool rest height so the cutter is at the vertical center line of the lathe.
4. Adjust the rear support on the hollowing system so the tool is parallel with the lathe bed. Recheck the position of the cutter to make sure it's the vertical center line of the lathe.
5. Carefully move the tool into the vessel and hollow out the portion that can not be reached with your straight shaft tools.

*With this tool mounted in the hollowing system the curved portion of the tool can be in contact with the tool rest. Rotational forces are absorbed by the hollowing system so that's not a concern as it is when this tool is used in a handle.

Product description

4" Tool Rest 1" Post.

• Designed for 70-220VSR
• 1" Post
• Length 4"

Product description

NOVA large bowl rest, 8.5" diameter the rest is radius on the top and bottom edges for smooth movement of the chisels and it can be used in either orientation for greater versatility.

• Part of the NOVA modular tool rest system, the 9090 bowl rest with 8.5" diameter curve is for turning the interior of bowls
• Radius edges to allow the chisel to glide smoothly along the rest
• Part of nova's modular tool rest system which offers 5/8" and 1" posts in various lengths

User questions & answers

Question:	I have this tool rest but I need a new post. Existing post is 1" in diameter w/ 1/2"-13 pitch male end to screw into the tool rest itself. Fit
Answer:	It will fit a 1" post
Question:	Are both curves the same diameter
Answer:	No. One is a 5.5” curve and works well for a bowl interior.
Question:	Will this fit the jet 1220vs
Answer:	The 9092 bowl rest would have to be accompanied by our modular tool post which will fit diameter of 1" or 5/8" in your tool slide.
Question:	What is the size and thread count for the hole that attaches the tool rest to the post
Answer:	I DON'T KNOW THE EXACT SPEC'S. WHAT I DO KNOW IS IT BITS THE NOVA 1" POST. MOST OF THERE TOOL REST ARE UNIVERSAL. THE SIZE WILL BE IN THE PRODUCT DESCRIPTION. JUST TALE NOTE THE 1 " POST IS USUALLY FOR THE 16" LATHE. THE 5/8" TOOL REST POST FOR 12". i DON'T OWN A NOVA 12 LATHE ONLY 16" i DO OWN A RIKON 12 1/2" LATHE AND THAT POST IS ALSO 5/8"..

Product description

The Irons Tool Gate Holder is a tool which any Woodturner, especially Hollowers, find invaluable. Once you are using it, it will be hard to remember turning without it! The Irons Tool Gate reduces the, usually, unsupported length of your hollowing tool. It can be pivoted so your tool is supported even inside your vessel. Safe and easy to use for all skill levels it prevents your tool slipping sideways. The Tool Rest is designed with two different sized tool rests 1/2" to 1" allowing it to support a large range of tool sizes, from the shaft to larger handles. There is a choice of six different gate positions to enable hollowing from many different angles. The Tool Holder smoothly pivots within the tool gate body and can be quickly and easily moved along the six different positions for versatile hollowing. Designed by professional woodturner, Phil Irons, who is an award winning turner especially known for his hollow forms. Manufactured and zinc coated for durability and long lasting finish.

TOOL POST REQUIRED, SOLD SEPARATELY - Simply purchase a 1/2" UNF tool post which is suitable for your lathe. Woodcut Tools sell a range of tool post size options on Amazon which are suitable.

• TOTAL CONTROL & VERSATILITY - Preventing your tool slipping sideways and allowing the turner to guide the tool into the turning smoothly and accurately for more controlled cutting. Designed to securely hold tools from 1/2" to 1". There is a choice of six different gate positions.
• DEEPER HOLLOWING - Hollow even larger and deeper vessels when using the Irons Tool Gate. This rest can even be rotated and positioned into your vessel enabling deeper hollowing and reducing the, usually, unsupported length of your hollowing tool inside your hollow form. Hollowing of forms up to 19" deep have been achieved with the Irons Tool Gate.
• TOOL POST REQUIRED - A tool post is required for use of the Irons Tool Gate. This is sold separately as each lathe has a different size tool post. Woodcut Tools has a range of tool post sizes available sold separately on Amazon. Please note we have been informed the Nova tool post in "frequently bought together" does not work with this.
• USER GUIDES & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Irons Tool Gate. User guide and demonstration videos are available on our You Tube channel.
• OUR MONEY BACK GUARANTEE - We consistently get feedback from customers who have found the quality and performance of our products have exceeded expectations, but in case you don't agree, we offer a no questions asked 30 Day Money Back Guarantee. Give our Irons Tool Gate a go today, absolutely risk free!

User questions & answers

Question:	I need a tool post for my rikon 12-100 lathe. is there one available in the us that is 5/8's of an inch diameter? if so... what is the length
Answer:	Thank you for your question. On Amazon we do regularly offer a 5/8" x 3 1/4" tool post however we are currently out of stock, hence why you cant see it. They are currently on a ship and will be back in stock at the end of this month.
Question:	Will a nova modular tool post work with this? also, the link for your 1 inch tool post goes to the 30mmx180mm tool post page
Answer:	Thank you for your question. Double check if the Nova tool post has a 1/2” UNF thread, if so then yes it will. Apologies our 1” tool posts have been out of stock, therefore you can’t see them, however they are now back in stock so when you go to the tool post page you will see different size tool post options you can select. I hope this is of help and please do not hesitate to contact us further if you require any other assistance.
Question:	How come i can't find a 1"x5" post for this tool rest? i have looked everywhere! there is only one post available. please advise
Answer:	Our apologies these are currently out of stock on Amazon, due within the next few weeks. I currently have stock of the 1” tool post in another warehouse in USA which I could supply you one from right away. Apologies for the inconvenience.
Question:	What is the tool post size
Answer:	Thank you for your question. Our sincere apologies, your question has highlighted a major error within our listing as this product is not supplied with a tool post (which we are fixing immediately). Our Tool Gate can be simply screwed onto any size tool post which has a 1/2 inch UNF thread.

Product description

Run your finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless-steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour for your fingers to slide in as you work. This medium size tool rest allows you to sneak in closer, even if other parts of the workpiece are wider, while having the ability to provide more sliding surface without having to readjust. 5/8" diameter mounting post fits most mini and midi lathes.

• This high-quality 6-inch tool rest is made to precision standards and will increase the quality of your work.
• 5/8" diameter mounting post fits most mini and midi lathes
• 5/16" round stainless steel tool rest
• Cast steel body with black epoxy finish
• Integrated mounting post (not threaded) so it won't loosen with vibration or impact

User questions & answers

Question:	Will it fit a sears craftsman 12 inch by 36 inch lathe
Answer:	You would have to determine what size shaft your tool rest requires. Mine is a 5/8 and I think Sears is a 7/8, but I don’t know for sure.
Question:	Does the Rockler 6" tool rest have a 1" diameter stem
Answer:	Go to Rockler web page and check it out . There is at least 2 sizes and it tells you when you look it up what size the stem is
Question:	What is the shaft size of this tool rest
Answer:	It’s supposed to be 5/8” or .625”. Mine is actually .605”, kind of a sloppy fit.
Question:	Can you tell me if this will fit in a Habor freight 12" wood lathe, I think the hole is 15/16 or do you have one like this that will fit my lathe
Answer:	it was to small for my busy bee lathe

Product description

Run your finger along the edge of this premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour for your fingers to slide in as you work. This short rest allow you to sneak in closer, even if other parts of the workpiece are wider. 5/8" diameter mounting post fits most mini and midi lathes.

User questions & answers

Question:	how long is the 5/8 " shaft
Answer:	2.1/4 " o 60 mm
Question:	What is the total height of this tool rest
Answer:	The total height is 4 1/8 inches
Question:	How big around is the post? Mine
Answer:	On the box it says that it is 5/8" or 0.625", measured with digital calipers, mine came in at 0.607".
Question:	where can I buy a toolpost base for a tool post hoder of One incg chank
Answer:	Not sure I understand what you are asking ( incg chank) ?