13 best power cable terminals

• HEAVY-DUTY AMERICAN DESIGN: Unlike all those cheaply-made battery cables, the Spartan Power Made-in-USA 4 gauge battery cables are PVC insulated and professionally cut, crimped & heat shrunk in Reno, NV!
• FOR A LIFETIME OF SERVICE: Your inverter 4 AWG battery cables are not only sturdy & flexible, but they also feature 420 strands of 100% pure copper cable and 5/16" lugs pre-assembled on both ends.
• ONE SET OF BATTERY WIRES, UNLIMITED USES: The Spartan Power 2ft positive and negative cables are ideal for car automotive, solar, marine, RV, motorcycle, lawn/garden equipment or power inverter batteries.
• FIND A CUSTOM SOLUTION: Don't need two cables? Need only a positive or ground wire? Find exactly what you need in our huge collection of premium-quality automotive battery cables and accessories.
• LIFETIME CRIMP WARRANTY: We believe these are the best 4 AWG battery cables on the market today, if you ever experience a crimp failure, Spartan Power will gladly repair or replace your cables for free!

User questions & answers

Question:	Will these work to replace the cables on a 2007 h-d fxd super glide
Answer:	Yes, these would be a good replacement battery cable for a harley davidson super glide motorcycle.
Question:	Can i just bolt these to my existing ones to extend them, instead of slicing
Answer:	Yes, it is possible but not recommended. Better to just have the correct length cables. You don't want an openly expose positive cable connection that may accidentally grounded causing a electrical short.
Question:	I’d it 2 ft each or 1 ft each
Answer:	the 2 foot 4 AWG cable set would be QTY 1 2ft red and QTY 1 2ft black.
Question:	My powerpole connectors are 10 guage for my goal zero 400. How can i get these connectors in 10 guage wire ? If not, what guage would work properly
Answer:	In wire sizes the smaller the wire number the larger the size of the wire. Any size wire # 10, 3 8, # 6, # 4 wire size will work fine in your application. The larger the wire, the more current it will carry.

Product features

Congratulations, you've finally found great battery cables!

Spartan Power 1 foot 4 AWG battery cable sets come professionally assembled with 5/16" ring terminals or alligator clamps and are perfect for connecting up to a 1500 watt power inverter to a battery bank or tieing batteries together. You can also use Spartan Power battery cables for replacement automotive, motorcycle, RV, camper, travel trailer & other vehicle wiring applications, grounding cables, golf carts, car audio stereo amplifiers, solar and many other DC applications. These 100% pure copper cable sets come with adhesive lined irradiated polyolefin (PO) heat shrink, which is exceptionally resistant to water, fungus, and UV light.

All Spartan Power battery cables are Made in America by workers who take pride in their work every day.

Need a different size or just a single red or black cable?

Great battery cables start & end with great materials! Do your homework before you buy, you get what you pay for!

Battery Cable & Wire Features:

• Made in the USA
• Polyvinyl-chloride (PVC) insulation
• 90°C MTW - UL & CSA 105°C
• Voltage rating: 600 volts
• VW-1 & moisture resistant

 

Product description

iGreely Dual Positive/Negative ATC Style Fuse Holder 10AWG Wire with Ring Terminals and 45A Connectors 2ft/60cm

Dual Positive/Negative ATC Style Fuse Holder with 2pcs extra 30A fuses.

The cable is made of heavy duty 10AWG wire. Very thick and durable.

Total length:0.6m/2ft, cable length:0.5m/1.6ft.

Tin plated ring terminals on one end and 45 amp connectors on the other.

The cable with fuse holders is ideal for connecting to a Power Supply or Battery for automotive.

• Dual Positive/Negative ATC Style Fuse Holder with 2pcs extra 30A fuses.
• The cable is made of heavy duty 10AWG wire. Very thick and durable.
• Total length:0.6m/2ft, cable length:0.5m/1.6ft.
• Tin plated ring terminals on one end and 45 amp connectors on the other.
• The cable is ideal for connecting to a Power Supply or Battery.

User questions & answers

Question:	do i have to remove the anderson connectors when charging my batteries seperately ? These work great with the GZ
Answer:	We suggest not to remove the connectors, you can connect 2 cables as an extension cable for charging.
Question:	Does this work with Goalzero Yeti 400, to chain another another battery
Answer:	The Goalzero does have Anderson connectors, so this cable will plug right into it. You need to be sure you are connecting the end with the ring terminals to an AGM Lead Acid type battery, which is the same type battery the Goalzero contains.
Question:	Does this also have the option of a 40amp fuse
Answer:	It's not recommended at all. The 10AWG wire is not rated over 30A. So, that's why only 30A fuses are used. Higher fuses should not be used.
Question:	What size ring is it
Answer:	Not sure exactly, but it fits fine on my 75AH AGM battery with screw in terminals.

Product description

Features:

Female Jack Description:

No electrical tap, No splicing, no crimping, but only a small screw driver.

Easier for camera installation, save time and more securer cable connection.

5.5mm x 2.1mm Female power plug connector.

External diameter of the plug: 5.5mm.

Internal diameter of the plug: 2.1mm.

Dimension: 38mm(L) x 14mm(W) x 13mm(H).



Male jack Description:

2.1 x 5.5mm CCTV Camera DC Power Plug Connector.

DC Power Plug with plastic construction and strain relief.

This 2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal for CCTV camera connected.

It is a perfect solution for those who want to make custom power cable.

This CCTV Camera DC Power Connector will provide a great connection.

Internal diameter of the plug: 2.1mm

External diameter of the plug: 5.5mm

It measures approx. 1.5" long, 0.55" wide, 0.5" thick.



Condition

1.We sell the latest models of DC Power Jack

2.High quality, best choice for CCTV camera.

3.Each item is tested before shipping and are 100% working



Package included:

10 PAIRS DC Power Jack Plug Adapter Connector for CCTV

User questions & answers

Question:	anyone know where I can get these in 16 awg and 24 awg
Answer:	Max Height: 18.1"
Question:	Can this handle 120v 98W power supply
Answer:	Hi A very good question. I have all three (3) ATD T-handle sets - SAE, Metric, and Torx. And all are designed with the same length that the metal shaft extends beyond the plastic molded T-handle. = 100mm...or....3.94 " inches. Due to the manufacturing processes used to make this price-range product, the lengths of a few in each set, vary by up to 2.5 mm ( 0.1 " inches) longer or short than the standard 100mm. Hope that helps. Scott
Question:	Can this work with a 48v battery Ebike charger
Answer:	5 to 6 inches. Perfect length for faucet screw removal that I needed to get behind a handle for.Solid material takes pretty good torque and doesn't break.
Question:	can I wire female plug to female plug to make both work
Answer:	This ram replaced the ram that came with my engine hoist, the old ram leaked and drifted after many years. This ram worked great. I did not try wobbling the ram in its fully extended position, but I did not notice any instability at all. We were installing a V6 engine with the transmission and transfer case as a unit into my truck . There was an engine leveler on the hook and a second small chain hoist attached to the hook and transmission to guide the assembly into the truck. I can't say the ram was at full extension, but it was close to it when we pushed the hoist in to lower the engine/trans/transfer assembly into the engine compartment.

Product description

**Igreeman only manufactures and provides the most upgraded, the high-end quality connectors / adapters / cabling with detail-focus for CCTV HD security surveillance system**.

With this Igreeman's 10 Pairs Brand New Male & Female DC Pigtail for your video security Camera Power Connection, You can easily integrate these connectors and CCTV coaxial cables, enabling you to send power from compatible cameras to your DVR. This pack comes with 10 male 2.1 mm and 10 female 5.5mm connectors, they are a great addition to any electronic project you might have, from a CCTV camera system to a light up Halloween costume

Seller Warranty Description

All purchases include Igreeman's One Year Domestic Warranty plus Lifetime Support. Enjoy peace of mind knowing that if your IGM-DC2020-MF-T ever stops working within a year of purchase, it will be replaced promptly from our US based operation.

Feel free to contact us for a prompt service if you have any question or concerns..

For the BNC Male Connectors for video cable extension, please search at Amazon with Asain: B071XG8CKN or B071XFQBNP

• 〖EASY DC CONNECTION〗:Upgraded 18 AWG fine copper wires well- constructed pigtails pre-made DC jack power socket terminal provides a simple and secure DIY solution for DC power supply connectivity, work with a power adapter or a power box
• 〖UPGRADED & REPLACEMENT〗: These upgraded and new version pigtail power sockets are designed to replace the old dc twist cap or barrel pigtail for easier and securer power connection/ extension
• 〖RELIABLE CONNECTION〗: Upgraded heavy-duty very high quality connectors and socket hardware with fine copper wires brings the reliable peace of mind connection
• 〖WIDELY-USE〗: This new version pigtail socket is widely-use and compatible with all CCTV security surveillance camera systems and all 2.1mm x 5.5mm Max. 5A DC power supply application
• 〖Prompt Service〗: 100% QC with 7/24 Technical support from Igreeman engineering

User questions & answers

Question:	how long is the cord
Answer:	Each half is 12" long, for an overall connected length of 24".
Question:	Will this work with an intel bean canyon nuc
Answer:	I’m not sure what that item is but those pigtails or for 12 V or 24 V low-voltage power
Question:	my camera has a female phoenix connector i need the male with a dc wall adapter attached to it
Answer:	How many circuits? What voltage?

• 10ft of 5 gauge inverter cable set
• Pure OFC copper wiring - for maximum power transfer
• Includes: 3/8" and 5/16" ring terminals (only 1 end has been crimped to allow adjustments)
• Each cable end is sealed with heat shrink tubing to minimize corosion (only 1 end has tubing applied to allow adjustments)
• These cables are true spec with a rugged PVC jacket for ultimate protection

User questions & answers

Question:	Would this be ok for a small riding mower
Answer:	Yes, extra heavy duty. I used it on a large ATV
Question:	How many strands in each cable and what gague are the strands? Is it stiff or flexible
Answer:	I’ve already used the wiring but I believe there was 100 strands. It’s fine wire which makes it flexible. I found it easy to use. I installed it to power my downriggers. No issues so far.
Question:	Can I get 5/16 lugs for both ends? I can crimp all terminals
Answer:	Hi, it won't come with 5/16" on both sides, but contact us after purchase and we will gladly send an additional 5/16" terminal.
Question:	Can i use these to run in parallel between 2 12v rv marine batteries on my travel trailer or should i get a thicker gauge
Answer:	Yes, but It depends on how much power your RV draws, but I would go with a 2 awg or 4 awg wire.

Product features

Perfect for Automotive Battery Use

• Car
• SUV
• Truck
• RV
• Golf Carts

Perfect for Marine Battery Use

• Fishing Boats
• Bass Boats
• Bowrider Boats
• Catamaran Boats
• Dinghy Boats

Perfect for Solar Battery Use

• Perfect for Most Solar Panel Setups

Product description

Cable: 10AWG.

Total length: 60CM.

O terminal:

Inner diameter: 8 mm.

Outer diameter: 14 mm.

45A to O-ring terminal connector Ideal for connecting to a Power Supply or Battery



What's in the Box:

1 x 45A to O Ring Terminal Connectors Harness.

3 x 30A fuses

• 45A to O-ring terminal connector harness total length 60cm, cable 10AWG.
• Dual Positive/Negative ATC Style Fuse Holder with 3pcs extra 30A fuses.
• Mounted with 45amp connectors on one end and 3/8 inch Tin plated ring terminals on the other
• O Ring terminal connectors it is a ring lug cable that screw mounts onto a battery and provides an interface for plugging into a charger, dc socket, etc. Convenient for hard-to-access batteries.
• The cable with fuse holders is ideal for connecting to a Power Supply or Battery for automotive.

Product description

4-Gauge Ring Terminal, 2 Red/2 Black

• Gold-Plated 4-Gauge
• .312-inch Ring Terminals
• 2 Red and 2 Black

User questions & answers

Question:	They look somewhat flimsy. Are these terminals capable of handling upwards of 150amp currents or will the insulation start to melt
Answer:	Those type of connectors and I have had a lot of experience in using these won't handle much more than 50 amps. The wire gauge diameter needed to handle 150 would be bigger than those connectors and you'll need a much heavier connector like what's used on a lawn tractor starter terminal.
Question:	What's the difference in the gauge like 4 gauge is 5 gauge and thicker wire
Answer:	If there was a 5 gauge it would definitely be smaller.
Question:	Why does the picture show 3 red 2 black
Answer:	Mine came 2 of each.
Question:	what crimper tool sjould i get
Answer:	I used a $20 one I got from autozone

• 25-FEET (7.62m) [ 25FT RED + 25FT BLACK 1/0 GAUGE POWER/GROUND WIRE ] - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow.
• COPPER CLAD ALUMINUM (CCA) - CCA wiring provides a good conductor for power transfer. This is the most economical option when choosing power or ground wire. Systems that require more power should consider OFC wiring.
• RUGGED PVC JACKET - Allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance.
• EASY POLARITY IDENTIFICATION - This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment.
• SOFT TOUCH JACKET - The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

User questions & answers

Question:	Can i used it on 220 electric power
Answer:	I am you can. The cost would be a concern, as well as the inability to confine the wires as you would need 4 wires 2 to carry load 1 neutral and one ground. I would think a 8 gage 3 with ground shielded cable would ge better. The only advantage I can see is it is very flexable
Question:	which wire is the best ofc or cca
Answer:	Ofc (oxygen free copper) is best for all electronics! Don't buy this stuff...it corrodes fast in normal air and carries 40% less current than same awg copper wire! If you need power...go copper!
Question:	What is the cable diameter in millimeters on the 8 guage wire
Answer:	The number one answer is; you should go to the AWG website and you will find the diameter , weight and rating for any wire size. In this case your looking at aluminum wire, not copper, which is more important then size. This wire states "Soft Touch" and this company uses aluminum to make this so. Be Careful of using aluminum wire; it can be dangerous.
Question:	how many amps can this take
Answer:	30 amps dc @13.8 volts MAX it gets hot at anything over 30 amps continuous for this 8awg wire....been there done that!

Product description

Tinned copper 3/8" lug terminals to Anderson Powerpole adapter cable. Semi-permanently connect a Goal Zero Yeti 1250 to a 100 Ah (or similar) 12V battery for longer run times. Made with 4 gauge Red/Black Bonded Cable, a genuine Anderson Powerpole connector and tinned copper, marine grade lug terminals. 24 inches long.

• Marine grade tinned copper 3/8” lug terminals to Anderson Powerpole SB175 connector, Rated for 100 Ah
• Made with 4 gauge red/black bonded cable – 24 inches long
• Designed for use in many applications including most Goal Zero / Yeti applications
• Allows quick access to connect and disconnect storage battery power for solar generator applications

Product description

KICKER brass hardware uses Versa-Gauge connection points with oversized convex screws for rock-solid connections. Use multiple gauge wires with no adapters needed. You get a clean, sharp install that lasts for years. BT4 Pos/Neg Battery Terminal. 1/0-8AWG, 4-8AWG The KICKER BT4 battery terminal works with 1/0 to 8 Gauge wire. This battery terminal uses Versa-Gauge connection points with oversized convex screws for rock-solid connections. The wire receptacles work perfectly for clean, sharp install and a negative-post adapter collar that locks into place.

• The KICKER BT4 battery terminal works with 1/0 to 8 Gauge wire.
• This battery terminal uses Versa-Gauge connection points with oversized convex screws for rock-solid connections.
• The wire receptacles work perfectly for clean, sharp install and a negative-post adapter collar that locks into place.

Product description

• Power Supply Cable - 6 feet of 10 gauge Red/Black Zip Cord
• Mounted with 45amp Anderson Powerpole connectors on one end and 3/8 inch Gold Plated ring terminals on the other
• Ideal for connecting to a Power Supply or Battery

• Power Supply Cable - 6 feet of 10AWG Red/Black Zip Cord
• Mounted with 45amp Anderson Powerpole connectors on one end and 3/8 inch Gold Plated ring terminals on the other (Genuine Anderson Powerpole Connectors)
• Ideal for connecting to a Power Supply or Battery

User questions & answers

Question:	Can you disconnect dovetail power pole
Answer:	The Powerpoles are glued together. With a little effort you can pull them apart.
Question:	Will this connect to my goal zero
Answer:	Yes, in order to use an external battery.
Question:	does this plugged in to the side of the goal zero, yeti 400, allowing me to run a 12 v utility
Answer:	Yes, it plugs into "Anderson" plugin on side of yeti 400. I use it to chain link an additional 12 v battery to the yeti 400 and get more power reserve
Question:	Does this cable comes with a warranty
Answer:	No, there is no warranty. This cable is well made with quality components and should last a very long time with proper treatment. I bought this cable to make it easy to connect a 1000W voltage inverter to my car's battery.

Product description

Description



This package comes with 10 pairs of crimp terminals and connectors. High quality fork terminal, superior electrical contact. Gold plated to protect against corrosion and to ensure increased power flow and the highest quality audio without distortion. 4 gauge power wire/ ground wire fork terminals. Alternative for banana plugs. Safer than connecting bare wires.



Feature



- Color: Red and black

- Material: Copper

- Size: 5/16"(about 8mm) stud ring diameter.

Warm tip: The picture is for reference, and please allow 0.1-0.2 inch difference due to manual measurement.(1 inch=2.54cm)

- This package comes with 10pairs of crimp terminals and connectors. 10 red boots and 10 black boots of crimpable fork terminals.

- High quality fork terminal, superior electrical contact.

- Premium copper heat tested, gold plated to protect against corrosion and to ensure increased power flow and the highest quality audio without distortion.

- 4 gauge power wire/ ground wire fork terminals.

- Alternative for banana plugs. Safer than connecting bare wires.



Package Including



10 x Red Boot

n10 x Black Boot

• High quality insulated crimp fork terminals connectors, superior electrical contact
• 4 gauge power wire/ ground wire fork terminals；Alternative for banana plugs. Safer than connecting bare wires.
• Premium copper heat tested, gold plated to protect against corrosion.
• To ensure increased power flow and the highest quality audio without distortion.
• 10 pairs of crimp terminals and connectors；10 red boots and 10 black boots of crimpable fork terminals.

User questions & answers

Question:	What size is "4 guage"? awg, swg, or what
Answer:	Size: 5/16"(about 8mm) stud ring diameter.

Product description

MAXSELL Wire Twisting Tools,Wire Stripper and Twister,Wire Terminals Power Tools for Stripping and Twisting Wire Cable.

Feature:

-Improve work efficiency

-Durable material

-Good for Electrician wiring,quick peeling and wire winding

-Automatic peeling thread and connect tools

Specifications:

Material: metal

Color: silver

Package Includes:

2 x Wire twisting tools

1 x Pliers

1 x Extension Adapter

• Package Includes: 2 pieces wire terminals power tools,1 piece Pliers,1 piece Extension Adapter.
• Specifications: Our tools is a universal cable quick connector, with 2.5-4 square 3 Way 5 Way two specifications for your choice.
• Easy To Operate: Wire stripping and twisting tools can be used in conjunction with electric drills, and steel wire twisting tools can simultaneously twist and wind.With Pliers,it can help increase productivity, prevent sore fingers and reduce fatigue.
• Durable Material:Our tools made of high-quality metal, not easy to break; can withstand good performance even under harsh conditions.
• Note: To ensure your safety, the circuit breaker must always be turned off before operating the electrical system.