13 best ceiling fan remote control

Product description

HOW TO USE?

Just set the DIP switch pattern of this remote control to be the same as the DIP switch pattern of the original remote control. If you don’t know the original DIP switch pattern, you need to try these 16 possibilities: (0 is down and 1 is up) 0000, 0001, 0010, 0100, 0110, 0101, 0011, 0111, 1111, 1110, 1101, 1011, 1001, 1010, 1100, 1000



The manufacturer of this remote has provided remote control and receiver technical support for many well-known brands of ceiling fans in the past. Therefore, the quality and performance of this original OEM remote control is reliable.



Specification

Material: ABS

Require: 9V battery (not included)

Effective Distance: 50 ft (Without thick obstacles)

Speed Regulation: 3 gears to change



Package Includes(9V battery is not included)

1* Remote Control

1* Wall mount

2* Screw

1* Paper description

• 53T Ceiling Fan Remote Control is a perfect replacement of Hampton Bay and Harbor Breeze FAN-53T, FAN-35T, L3HFAN35T, L3HFAN35T1, FAN-HD5, FAN-11T, KUJCE9103. It is manufactured by the original OEM and approved by the FCC.
• MAKE SURE - Your original remote the same as the picture shows. Your original remote control has the same DIP switches as the remote control in the picture. Their DIP switches are hidden in the battery slot. This remote control has no programming function. It cannot replace the remote which has a programming function, unless you can make sure that the receiver in your fan has such a DIP switch.
• This remote control controls the 3-speeds of your ceiling fan (low, medium, high), The Light on/off, Dimming (As long as your original remote can dim light). This remote control cannot reverse the fan. Just set the DIP switch pattern of new remote control to be the same as the DIP switch pattern of the original remote control.
• This is only a transmitter, the package does not include a receiver or 9V battery. Easy to operate and safe. It only takes less than half a second from when you press this remote control button to when your ceiling fan receives a signal and reacts.
• We are very willing to provide customers with 100% satisfactory service. Whenever you have any questions, our customer service will answer them for you. We provide our customers with 24/7 service.

User questions & answers

Question:	will this work with a UC7067rc receiver
Answer:	Seeing as the UC7067rc has a 4 switch coding function, I would say yes.
Question:	Does this remote have adjustable dips to match the receiver
Answer:	Yes, There are dip switches under the battery cover.
Question:	Can i control this ceiling fan remote control with my phone
Answer:	Sorry, but there is not bluetooth with this remote - so no you will not be able to control the receiver with your phone.
Question:	I bought this for my harbor breeze bdb52lw5n but i do not see any dip switches in the fan itself
Answer:	The switches will not be in the fan itself. They will be in the remote or wall remote switch.
Question:	How do you reverse the rotation of the fan blades with the remote
Answer:	The only way to reverse the fan is to flip the switch on the fan itself. The remote can’t change the direction of the blades.
Question:	Is it possible to get the wall mount only for this remote
Answer:	When you purchased the remote it comes with all the wall mounting parts. Hope this helps.
Question:	My remote only turns the light on /off. Can't dim the lights anymore. What can I do
Answer:	If you have led light bulbs , they have to be dimmable. Ours dims by holding the light button down.
Question:	Will this work with Home Decorators collection fans
Answer:	Yes, but I haven’t be able to install it bc an electrician is charging me 150 $$ just for a home visit.

Product description

What can we do?

Convert the traditional ceiling fan light to remote controllable one

Scope of Application: Home, Restaurant, Office, Hotel, Club, Display Hall, Garage

Why Choose Our Item?

1, UNIVERSAL APPLICATION and WIDE REPLACEMENT

YUKIHALU Universal Ceiling Fan Remote Control Kit works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands.

2, NO MECHANICAL RELAY INSIDE, No time delay, No switch electric arc, No lifetime limit

3, SUPER SMALL SIZE, It is possible to install this unit into your mini-ceiling fan which just have narrow space in canopy

4, Multi-functions

* FAN control: 3 fan speeds (HIGH / MEDIUM / LOW) and off button(stop fan)

* Timing control: 1H, 2H, 4H, 8H

* Light control: lamp ON/OFF

key parameter

Input voltage: AC 80~264V 50/60HZ

Max power for FAN:100W

Max power for Light: 200W(incandescent) / 100W(LED)

Wireless Transmission: RF 433MHz

Remote distance: 30m in open air

Battery: 2XAAA battery (NOT INCLUDE)

# There is a one-to-one correspondence between the remote control and the receiver

# Include 5 pcs Screw connector, you do not need another tools or accessories to connect the wires

IMPORTANT TIPS

1, Check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size

2, If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together

3,The receiver does not have the function of Reverse

4, Battery not include

• 【WIDE REPLACEMENT】YUKIHALU Universal Ceiling Fan Remote Controls Kit works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one. Scope of Application: Home, Restaurant, Office, Hotel, The Club, Garage. Please note that the receiver does not have the function of Reverse.
• 【SUPER SMALL SIZE】: Super Small Size as no relay inside. You just need very small space to install the receiver unit into fan canopy. However, please also check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size.
• 【ADVANCED TECHNOLOGY】: Soft switch and Zero cross detection technology. No time delay, No switch electric arc, No inrush current. Large improve the reliability. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory. New technology make the ceiling fan remote controller kits to be more safe and long lifetime.
• 【3-IN-1 Multi-FUNCTIONS】: Include 4 separate buttons for Fan control :3-speeds (High/Medium/Low) and OFF; 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H; 1 button for light ON/OFF control (no dimming). NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
• 【12 MONTH QUALITY WARRANTY】: 30 days full refund, 12-months warranty and 365 days technical support. Your purchase today is completely RISK-FREE. If you are not completely satisfied for our controller, let us know for a full refund. Simple as that. Why wait? Get it today and change your ceiling fan and light to Remote control one!

Product features

Small Size, Universal and High Reliability

• Advanced technology, soft switch and zero cross detection technology limit the surge current, Large improve the reliability.
• RF technology. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory before delivery. It works individually.
• Universal version. Works well with most of ceiling fans in market. Well compatible with Hunter, Hampton Bay, Harbor Breeze, Westinghouse, Honeywell and other well-known ceiling fan brands.

Super Small Size, Mini receiver

• Choose this kit If your fan is mini size and just have narrow room in canopy.
• Mini receiver fit for your mini fan

Speed, Timing and Light wireless control

• 4 Fan Speeds: HIGH/MED/LOW/OFF
• 4 Countdown Timing: 1H/2H/4H/8H
• Light control: ON/OFF, No dimming.

Beep ON / Beep OFF Setting

• Press and hold 'STOP' button in remote to turn ON or turn OFF the beep.
• Once the beep off, it will not affect other person even your dog when you operate your fans.

Easy to Install

• Very easy and fast for installation.
• Blue to Blue, Black to Black, White to White.
• Install carefully if colors or number of wires do not match your fan,

• Plastic
• ☞Easy Installation - Installation of the Universal Ceiling Fan Remote Controls Kit is a breeze and the looks of the remote are second to none. No need to take off the light kit and blades. only 5 wire hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires out of the ceiling connect the remote to electricity, and three wires into the fan control the fan.
• ☞Universal Fit Ceiling Fan Add On Remote - No more getting up to turn the lights/fan off after reading in bed/sleeping! It adds remote control compatibility to any fan. LPHUMEX Universal Ceiling Fan Remote Controls Kit works well with 95 percent of ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one.
• ☞Good Signal - No problem with signal, you can adjust the fan from another room, or even downstairs.
• ☞Multi-Fuctions - Includes separate buttons for 3 fan speeds,designed to separately ceiling fan remote control speed and light; Includes wall cradle for handheld remote control,This kit converts regular ceiling fan into a remote controllable one.
• ☞Buy with Confidence ! - Strong Signal and timely tech support.

User questions & answers

Question:	Will this ceiling fan remote control kit work with any fan
Answer:	This is a universal one. This fan remote kit will work with any fan & light combination. So long as there is enough room within the dome at the ceiling to contain the unit.(Please make sure of this before buy)
Question:	Can I use 2 of these remotes kits with different fans close togehter without 1 remote activating both fans
Answer:	these are fixed code fan light controls. Each remote can only control the corresponding receiver(fan light), they will not mutual interference each other.
Question:	Will it work on a fans with 4 level fan settings
Answer:	Even if the fan has 4 level settings it must be placed on high for the remote to work properly. The remote will then give you 3 speed options.
Question:	What is the RF frequency of this remote & receiver
Answer:	443

Product features

So easy to install!

Installation is a breeze and the looks of the remote are second to none. Just make sure you have room in ceiling fan for the remote box. only 5 wire hook up. The most challenging part was placing the receiver in the canopy. Connecting the receiver to the fan was child's play and the receiver to the house wiring was even easier.

Lazy Man Choice!

This ceiling fan remote comes with a fan remote holder for the wall switch or which can be mounted by the bed , so that you can leave it over the wall switch or take it out like a remote. It is so nice to not get out of bed to turn the fan on or change a setting. You will love it!

Fan Remote Control Kit Function!

• 3 Fan Speed Control: High/Medium/Low
• 4 Timing Control:1H / 2H / 4H / 8H]
• Fan Lamp/Fan: ON/OFF
• Voltage:85V-260V/60HZ
• Max Power:(Fan:120W,Lamp in total:300W)
• Please do not overload!!

• Collection Name - LIGHT WAVE
• Finish Color - COAL
• Remote Included - RCS213
• Compatible Wall Controls - WCS213
• Bulbs are ARE included

User questions & answers

Question:	are the Minka-Aire downrods that you order separately fit all models of Minka-Aire fans
Answer:	Yes, the Minka Downrods will fit all of their fans.
Question:	Does this fan sold without a light kitl
Answer:	This one has a light, but they do sell the same model without a light. Search: Minka-Aire F843-CL Wave 52 Inch 3 Blade Ceiling Fan here on Amazon or on google.
Question:	Is this fan OK on a covered porch outdoor
Answer:	Sorry, no--this fan is designed for use indoors only.
Question:	What country are they made in
Answer:	Nothing is made here. High priced Chinese. Don’t worry, they are checked for bats before they are shipped. There are simply no longer any ceiling fans that are made in the USA. So almost all of the ceiling fans which are sold in America or US are either completely or partially manufactured in Taiwan or China.

Product features

Remote Control

This 3-Speed Remote Control puts the power in your hands and gives you full control over your lighting & cooling level.

Optional Downrods

The Light Wave's design allows you to customize the look of your fan, whether you desire a low profile or prefer to explore the potential of installing your fan in larger rooms. Downrods are available in 60, 48, 36, 24, 12 & 3.5" configurations. (6" Downrod included)

Uniqueness & Style That You've Come To Expect

This fan has a look that can define a room or space. It adds a flare and style that will have your guests asking where they can find one.

Features:

• Coal Finish
• 52" Blades
• Remote Control Included
• Voice-Activated

• Plastic
• Imported
• ☞Fan Remote Control Kit Small - If your fan's mounting bonnet is not so large, please choose this fan remote kit. But if it is smile line fan, you still need to check the dimension of receiver carefully before order to make sure there is enough space in the canopy.
• ☞Universal Fit- This small ceiling fan remote control kit fits for almost 95 percent regular ceiling fan lights, such as Harbor breeze, Hunter, Hampton Bay, Lichler and other Ceiling fan Lights. This ceiling fan remote can convert traditional ceiling fan lights into wireless control ones.
• ☞Easy Install - Installation of the celling fan remote kit is very easy and fast. Wire nuts, install guide and fan remote holder are included.
• ☞Multi-Functions- This fan remote control kit small converts regular ceiling fan into a remote controllable one. 3-speeds (High/Medium/Low) and OFF; 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H; 1 button for light ON/OFF control (no dimming).
• ☞RF Tech- Strong Signal. This remote control kit use RF wireless Support. Can remote far away.

User questions & answers

Question:	Can I put the receiver above the ceiling? Trying to control a fan blow into attic, power ideally from attic so no wire be seen. can signal be rec'd
Answer:	It is controlled by radio frequency and the reciever has a small antenna wire so it may be able to penetrate sheetrock if the distance is not to great.
Question:	Is there a way to adjust the fan speed settings for this remote? The high setting is not very high at all
Answer:	Please set your pull chain at the max and the high speed will be fine. Our Prime day promotion will be started in a short while. welcome save our store and buy at a big sale then. this fan remote control kit can not work with alexaBut we have new pattern wifi fan remote can work with alexa well,please check this link https://www.amazon.com/Ceiling-Control-Universal-Controller-Enabled/dp/B08H4JDWF5/ref=sr_1_28?crid=1WSX0GRAAIBAC&dchild=1&keywords=wifi+fan+remote&qid=1602499184&s=hi&sprefix=wifi+fan+remote%2Ctools%2C441&sr=1-28
Question:	What type of battery is used in remote
Answer:	Our Prime day promotion will be started in a short while. welcome save our store and buy at a big sale then. this fan remote control kit can not work with alexaBut we have new pattern wifi fan remote can work with alexa well,please check this link https://www.amazon.com/Ceiling-Control-Universal-Controller-Enabled/dp/B08H4JDWF5/ref=sr_1_28?crid=1WSX0GRAAIBAC&dchild=1&keywords=wifi+fan+remote&qid=1602499184&s=hi&sprefix=wifi+fan+remote%2Ctools%2C441&sr=1-28
Question:	Funciona con alexa
Answer:	No se no la he puesto

Product features

So easy to install!

Installation is a breeze and the looks of the remote are second to none. Just make sure you have room in ceiling fan for the remote box. only 5 wire hook up. The most challenging part was placing the receiver in the canopy. Connecting the receiver to the fan was child's play and the receiver to the house wiring was even easier.

Lazy Man Choice!

It comes with a fan remote holder for the wall switch or which can be mounted by the bed , so that you can leave it over the wall switch or take it out like a remote. It is so nice to not get out of bed to turn the fan on or change a setting. You will love it!

Fan Remote Control Kit Function!

• Fan Lamp/Fan: ON/OFF
• Voltage:85V-260V/60HZ
• Max Power:(Fan:145W,Lamp in total:500W)
• Please do not overload!!

• ♥This universal remote control is designed to separately control your ceiling fan speed and light brightness. There are 4 buttons (HI,MED,LOW,OFF) to control the speed of the fan and off.
• ♥Our receiver uses thyristor, an upgraded component, which is different from ordinary products on the market.The thyristor is superior to the relay in dimming function.Our receiver is safer and has better carrying power for fans and incandescent lamps, and the size is smaller than that of receivers which use 2 relays. Our product is the safest.
• ♥FAN-18R is an OEM product of a designated receiver model of some well-known brands such as Harbor Breeze. Its high-cost and exquisite manufacturing process has been tested by the market. The 18R receiver's rated power is 190W, and its excellent stability and economical output are particularly suitable for all LED bulbs and energy-saving bulbs. The most economical power consumption is used to release the maximum efficiency.
• ♥The light button will control the light on and off. Dimmer controls light brightness when pressed. The red indicator on the transmitter will light when one of the 5 buttons is pressed. Use a 9V size battery in transmitter.
• ♥Our Total Customer Satisfaction Guarantee - Thank you for making us the PIKEMAN ceiling fan remote control kit. If you are not 100% completely satisfied, simply contact us to request a refund or exchange! 1 year warranty ! (Please note that after the sale is not contact Amazon official customer service)

User questions & answers

Question:	Can these parts be used in Casablanca Fans
Answer:	Sorry I do not , I have 2 like the one shown that are brand new for I never have used them . Good luck !
Question:	Does this remote change the fan direction
Answer:	Yes, they do. Go to website to order
Question:	How many volts are supplied at the light output on the receiver
Answer:	Worked with my Hampton Bay fan that I got at Home Depot
Question:	The lights don't go off completely. They are dim or bright but no way to turn them off with the remote. Does anyone have any ideas
Answer:	Yes it does but if you ordered a new remote don't buy the holder.The new remote comes with one.

Product description

Product description Ceiling Fan Remote Control Replacement for Hampton Bay Hunter FAN-HD UC7078T CHQ7078T FAN-HD5 Standard-RR7079T L3H2010 Our products are regular original OEM products, which have reliable quality and complete certification. Please certify icoolLink Brand. Features  Replaces for Hampton bay ceiling fan remotes including FAN-HD, UC7078T, HD5, CHQ7078T. Also include Standard-RR7079T. Works with the following receivers: FAN28R, UC7067FMRX Light dimming function may not fit the LED and Compact Fluorescent Lamp light. Easy to operate. Take off the battery cover, and slide the series of "Dip”switches with  a pen to match the same pattern as the old remote. Replace the battery in the new remote and it should work.  Package Includes(9V battery is not included)  1* Remote Control  1* Wall mount  2* Screw  1* Manual HOW TO USE  This is the remote control for the ceiling fan. Make sure your original remote the same as the picture shows. It can control your ceiling fan speed and light brightness. There are 4 buttons (Low/Medium/High/Off) to control the speed of the fan. Please remember to set the 4 dip switches inside the battery compartment(they are hidden behind the battery slot). Combination of the remote control dip switch should match that of the receiver inside the ceiling fan. Check the old remote with the battery cover off, there is a series of "DIP" switches. Slide dip switches of the new remote with a pen, and set the combination the same as the old  remote.Replace the battery in the new remote and things should work. There are 16 different frequencies for the Hampton Bay fans, so you may have to play with the combinations, if you don’t have the old remote to compare. Here are the frequency list:(0 is down and 1 is up) 0000, 0001, 0010, 0100, 0110, 0101, 0011, 0111, 1111, 1110, 1101, 1011, 1001, 1010

• ➜IT IS ONLY A TRANSMITTER. This package does not include a receiver. 9V battery is not included.includes wall mount.(Works with the following receivers: FAN28R, UC7067FMRX).
• ➜Replaces for Hampton bay remotes including FAN-HD, UC7078T, HD5, CHQ7078T. Also include Standard-RR7079T.
• ➜Make sure your original remote the same as the picture shows. It can control your ceiling fan speed and light brightness.
• ➜Easy to operate. Just need to set frequency combination of transmitter & receiver at the same pattern. Long Control distance up to 75 feet.
• ➜1 Year Warranty from purchase date.

User questions & answers

Question:	I set the switches like the old remote and installed battery. And nothing. What is wrong
Answer:	If the remote does not work in the default “all up” position, then the only way is to remove the fan and check the dip switch positions on the remote box inside. Both units should match. Change the remote to match the fan.
Question:	I lost my original remote so I don’t recall the settings on it to match the fan, what’s a good combination code that has worked for a Hampton
Answer:	I'm not sure...I'm using it on a Hampton Bay ceiling fan and light, and it works percectly. If you still have your old remote open the battery compartment and take note of the dip switch settings, you will need to make the same settings on the new remote.
Question:	Will this work on a Hampton bay south wind model number
Answer:	We have two and they have been working flawlessly. I checked carefully inside and out and there is no indication where manufactured.
Question:	will this work with a hampton bay premier receiver
Answer:	No, But I pulled the number off the back and plugged it in to my search and that is how I found the one I needed.

Product description

compatible with harbor breeze universal ceiling fan remote control kit 53t universal ceiling fan remote control kit compatible with hampton bay ceiling fan control kit replacement control receiver control with light dimmer hunter ,

• 💛This universal Ceiling Fan Remote Control kit is specifically made for Hampton Bay and Harbor Breeze fans,hunter etc,but works with almost all regular ceiling fans.
• 💛THE RATED POWER OF THE RECEIVER IS 250W, which far beyond the market's carrying power capacity, the superior rated power capacity carrying allows you to access more light bulbs, greatly increase the time of use
• 💛SELF-DEVELOPED RECEIVER WITH OUR OWN BRAND - Which is different from ordinary products on the market. Uses 2 relays and is an upgraded component. The upgraded dimming function of the relay is better than the thyristor. Our receiver is safer and has better carrying power for fans and incandescent lamps. The upgraded receiver size is smaller than the receiver using thyristors. However, our products are the safest.
• 💛Fan button controls 3-speeds (high/medium/low).Please note that the receiver does not have the function of Reverse.Light dimmer button just controls the brightness of the incandescent lights,if your light is LED, only control the LED’ on/off.
• 💛NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.

User questions & answers

Question:	Will this remote work with hunter receiver model
Answer:	Dont know model numbers
Question:	I have a home built in the 70s - no neutral wires. can i install this even though i have single wall switch to turn on fan? i use pull chains forlight
Answer:	This product needs to connect the neutral wire and the live wire.
Question:	does this work with the allen & roth eastview ceiling fan
Answer:	Not sure but it’s a universal remote and it’s smaller than most units
Question:	Do you sell just the remote holder
Answer:	Sorry, we did not sell the remote holder separately.

Product features

Eogifee Remote Control with Original OEM, FCC approved

• The rated power of the receiver is 250W, which far beyond the market's carrying power capacity, the superior rated power capacity carrying allows you to access more light bulbs, greatly increase the time of use.
• Our products are regular original OEM products with reliable quality. PLEASE look for Eogifee.

Set different PIN code if control multiple ceiling fans

NOTE: If you control multiple ceiling fans in the house, please check the PIN code settings are different between these, or it may let transmitter next door or your neibourhood's remote activates this ceiling fan in your other rooms. This may cause the fan turning on strangely while you are not at home.

Specification

• Maximum Power of Applied Light: Less than 250W
• Input voltage:100-140V
• AC Frequency:50/60Hz
• Relative Humidity: Less than 85%
• Maximum Power of applied Motor: Less than 0.6A
• Controller Output Gear: According to material object
• Properties of Lights in Controller: Relay contact on/off
• Wireless Transmission Mode:Radio Frequency (RF)
• Radio Frequency Band: 303.9MHz
• Remote Control Range:30m

Package Includes(9V battery is not included)

• 1* Remote Control
• 1* Receiver
• 6* Wire nuts
• 1* Wall mount
• 2* Screw
• 1* Paper description

Product description

The contemporary universal fan/light remote control comes in an elegant white finish. It has separate buttons for three fan speeds plus "Instant on/off" option. It also features full range light dimming and manual light operation with the included wall switch access plate and cradle. This lightweight remote control works with a variety of fans and is the perfect solution for control in the palm of your hand.

• MODERN FAN REMOTE: The universal remote matches any decor and keeps home interior current and inspired; Measures 4.75 x 3 x 0.75 Inch
• MULTI-SPEED CONTROL: The ceiling fan remote comes with three separate buttons of wind speeds and an "Instant on/off" option for quick fan control
• FULL-RANGE LIGHT OPERATION: Features wall switch access plate and lets you adjust the ambiance of your space with full-range light dimming option or manual operation
• COMPATIBILITY: This remote works with all brands of ceiling fans (as long as receiver fits in the canopy of the fan)
• FREQUENCY RANGE: The hunter ceiling fan remote control offers a range of up to 75 feet

User questions & answers

Question:	I'm on my second unit, I installed the fan and remote at the same time. about two or three weeks later the remote stops working. Any answers
Answer:	I presume that you did check to make sure that the wall switch was in the "ON" position when the failure occurred. You basically have two switches in series. Both must be in the "CLOSED" or "ON" position for proper functioning. If the wall switch was "ON" and the battery was good as indicated by the LED then it could be a defective receiver. If there are solid state components in the receiver then a failure in the first few weeks is almost more likely than after 5 years since the tiniest spec of dirt migrating on the solid-state devices can cause failure. This kind of dirt migration usually happens in the first 90 days after warm up and cool down cycles.
Question:	They write the receiver must fit in the canopy but they don`t provide receiver dimension. Very bad! Does anyone have a photo of the receiver with size
Answer:	The average receiver is approximately 3 1/2" long, 2 1/4" wide, and 1/2" thick. I have installed 15-20 of them and never encountered a receiver that would not fir within the fan canopy. Some flush mount ceiling fan canopies are tight but newer model fans accommodate most receivers.
Question:	does it work with hunter
Answer:	Yes, it works with any Hunter fan. I bought 2 different Hunter fans and it works perfectly with both!
Question:	Can this be used right away to replace my damaged one, or do you need to take the fan apart
Answer:	It cannot be used right away out of the box. You have to take the fan apart. This remote comes with a specific receiver that you have to use and replace your old receiver with. If your fan has the receiver in the main manifold of the fan, the big part the blades are actually attached to, then I would recommend just getting another fan. Taking apart the main motor housing is a pain. If the receiver is in the base part of the fan, where the support/mounting pole meets the ceiling, in the little dome, you can pop off the molding and rewire the new receiver in place.I bought 2 of these remotes as replacements hoping I could just reprogram them via frequency dip switches (like a lot of other fan remotes have) and not have to replace the old receiver in the fan and go through the hassle of rewiring it, but that ins't possible with this remote. The receiver unit must be replaced with the one that comes in the packaging. I hope this helps.

Product features

Universal Remote Control

The included handheld remote allows you to control your ceiling fan speed and dim the light from wherever you are in the room. Wall mounted cradle included so you always know where the remote is.

Why Hunter?

Since inventing the ceiling fan in 1886, we’ve put years of research into new designs, ground-breaking innovation, and technological advances while continually delivering the Hunter brand promise. From our high velocity SureSpeed fans to the color-controlled Tunable White LED, we continually reinvent the wheel in ways that satisfy our customers.

Product description

2 Pack Aubric Universal Ceiling Fan Remote Control Kits

Say goodbye to single control to your ceiling fan and light via pull chain or wall switch! Let our Aubric fan remote control kit help you to convert your traditional ceiling fan with light into a remote controllable one. It’s easy to control your fan and light from anywhere at any time!



Aubric universal fan and light remote control is suitable for most three speed ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. Upgrade your pull chain ceiling fan or wall switch ceiling fan light with this wireless controller in few steps.



RF technology. Not require selecting pin codes in multi-fans application, remote and receiver had been paired in factory before delivery. It works individually.



Universal version. Works well with most of ceiling fans in market. Well compatible with Hunter, Hampton Bay, Harbor Breeze, Westinghouse, Honeywell and other well-known ceiling fan brands.



Beep ON/OFF settings. Press and hold "STOP" button in remote can turn on or turn off the beep. The default setting is beep on. You can turn on or off the beep in anytime.



NOTE: If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.



Package includes:

2 X Fan Lamp Receiver

2 X Remote Control

10 X Wire Connectors

• Universal Fit Ceiling Fan Add On Remote - No more getting up to turn the lights/fan off after reading in bed/sleeping! It adds remote control compatibility to any fan. Aubric Universal Ceiling Fan Remote Controls Kit works well with 95 percent of ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. This wireless controller kit converts traditional ceiling fan with lights into a remote controllable one.
• Multi Fuction Remote Control Kits for Celing Fan Lights - 3 in 1 function, includes 4 buttons for Fan speeds control (High/ Medium/ Low) and OFF; separate light on and off control (no dimming); and 4 buttons for countdown timing remote setting and control (1H/ 2H/ 4H/ 8H).
• Easy Installation - The ceiling fan remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light.
• RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan lights in one room without interaction. There is a one-to-one correspondence between the remote control and the receiver.And no problem with signal, you can adjust the fan from another room, or even downstairs.
• Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on. PLEASE CHECK THE DIMENSION OF RECEIVER CAREFULLY TO MAKE SURE THERE IS ENOUGH SPACE IN THE CANOPY OF YOUR FAN. AND PLEASE NOTE THAT THE RECEIVER DOES NOT HAVE THE FUNCTION OF REVERSE.

User questions & answers

Question:	How do I make one remote control 3 receivers
Answer:	Sorry you can have 3 remotes to control 1 receiver, but we do not suggest you to have 1 remote to control more receivers. It may not work properly.

Product features

2 Pack Aubric Universal Ceiling Fan and Light Remote Control Kits

• Say goodbye to single control to your ceiling fan and light via pull chain or wall switch! Let our Aubric fan remote control kit help you to convert your traditional ceiling fan with light into a remote controllable one. It’s easy to control your fan and light from anywhere at any time!
• Aubric universal fan and light remote control is suitable for most three speed ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. Upgrade your pull chain ceiling fan or wall switch ceiling fan light with this wireless controller in few steps.
• Package includes 2 Pack Universal Fan Remote Control Kits

RF Remote Control

Simply adds this fan controller to your ceiling fan to make it remote controllable. Change your fan speed or turn on/off light from anywhere! Please note the receiver does not have the function of reverse.

3 Speed Control & Timer Function

The wireless ceiling fan control enables you to adjust the fan 3 speed, turn on/off light (no dimming), and time schedule settings. Make your life easier and more convenient.

Wall Moutable Remote Control

The remote control is wall mountable with the included holder. Make it work just like a wall switch. No need to look for remote control everywhere.

Easy Installation

1. Remove your fan canopy.

2. Wire the receiver to fan and light correctly.

3. Fix the receiver in the canopy.

4. Close your fan canopy.

Option for Beep ON or OFF

It is designed with a beep sound for confirmation of each operation. To turn it on or off, re-power the receiver and within 5 seconds, long press the "STOP" button until you get 3 beeps.

Universal Fit

Aubric universal ceiling fan remote control kit works well with most of ceiling fan with light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and others well-known brands.

Universal Ceiling Fan Remote Control Kit

The remote control has been paired to the receiver when sealed in factory. You just need to power on the receiver with correct wire connection and install batteries to the remote control. That's it!

2. To Pair With Multi Remote Controls

Each receiver can be paired up to 5 remote controls.

Simply power off the receiver and then power it back on. Within 5 seconds, press the "Hi" & "Light" buttons until you get 3 beeps from the receiver. The new pairing is complete.

3. To Unpair A Remote Control

Simply press the "Stop" and "2H" buttons until you get 3 beeps from the receiver, the remote control is removed from the receiver.

Product description

Want to add remote function to your pull Chain fan light or Fan?

This universal fan remote control kit converts regular ceiling fan into a remote controllable one. It is a great add on item when you want a remote control to turn your ceiling fan on/off, as well as turn the light on/off.



Fan Light Remote Control:

Lamp/Fan ON/OFF Control

3 modes Fan Speed Control [Hi/Med/Low]

4 Timing Control [1/2/4/8 H]



Fan Remote Control Installation:

Remove your ceiling fan and work with the wires and holding bracket to find the right amount of space to install the ceiling fan remote unit.

To be aware how much space you have in the fan.

Some "slimline" fans may not be as easy to hide the controller unit.(Please calculate before buy or you have to install the receiver outside the canopy which is not not beautiful)



Remote control for ceiling fan Main Technical Parameters

Input voltage:110V

AC Frequency:50/60Hz

Lights Controller:on/off

Wireless Transmission: RF wireless digital transmission technology is adopted to realize the one-to-one control

Remote Control Range:100ft

Battery:2 AAA battery needed( not include)



Please double check the size of the receiver carefully to make sure there is enough space in the canopy of your fan.

• Universal Remote Control - This remote fan control kit converts your traditional ceiling fan with light into a remote controllable one. It's easy to control your fan and light from anywhere at any time.
• Wide Replacement - This wireless fan control works well with most of ceiling fan light, compatible with Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known ceiling fans. Please note that the receiver does not have the function of Reverse.
• Multi Function - The remote includes 4 separate buttons for Fan control: High/ Medium/ Low speed and OFF; 4 separate buttons for Timing remote setting and control: 1H, 2H, 4H, 8H; 1 button for light ON/OFF control (no dimming).
• Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on.
• Easy Installation - The ceiling fan universal remote receiver can be installed over pull chain switch or wall switch ceiling fan. It is a higher quality and more stable remote control with rubber textured buttons that are easy to press and it comes with a holster you can mount to the wall. Please check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan.

User questions & answers

Question:	Is there anyway to turn off the beep when pressing a button
Answer:	The updated new version is able to turn off the beep. Within 5 seconds when power on the receiver, long press the STOP button on the remote until you get 3 short beep sound from the receiver. The beep was turned off. If you have any questions, please contact us at [email protected].
Question:	I want to install multiple kits in my house. there is no rf pins. will turning the light on in one room also happen in the room with the other kit
Answer:	The kits only works with paired remotes. So if you do not want one remote to control serval kits, install each kit and pair with each remote one by one seperately. If any further question, feel free to contact us at [email protected].
Question:	Works with led light
Answer:	I’m not certain but if if the voltage is 120, I don’t see why not. This is simply a relay that is triggered by the remote. So if you need to pass the 120 voltage through, it should work
Question:	Did anyone else notice that the remote has an off/no timer? what about off/on
Answer:	Hi dear customer, The on/off button on the remote is for turn on or off light. If you want to set timer, you just need to press the four hour buttons. Hope this is helpful to you. If you have any further question, please contact us at [email protected]. Thanks.
Question:	Is there a delay when turning on the light from the wall switch
Answer:	No delay, I like this remote. You can have the remote on my nightstand like I do and and flip the wall switch off and when you turn it back on the light turns on fast.
Question:	Does this receiver work on a hugger type ceiling fan
Answer:	Yes
Question:	How do I turn on light without turning on fan
Answer:	Most fan wiring has a black, blue, white wire at the canopy. On the controller black is power, white is the return, those connect to the house power. Three wires out of controller, black to fan wire, blue to light wire, white to white wire. If you have only a black & white on the fan. You will need a wire to feed through the wiring tube to the light kit below the motor.
Question:	What is the warranty on this fan/light controller
Answer:	one year. No worries, we cover this unit with 12 months warranty. Please don't hesitate to contact us via link below by detailing your order number. https://www.amazon.com/ss/help/contact/?_encoding=UTF8&marketplaceID=ATVPDKIKX0DER&ref_=v_sp_contact_seller&sellerID=A29X8ZO4JDNWZ9

Product features

Caution

• Important Note before Buy: Although this receiver is very small but if it is smile line fan, you still need to check the dimension of receiver carefully before order to make sure there is enough space in the canopy. Or this remote control kit can not use.
• If you know little electric knowledge, Please do find an electrician. Connect the wrong wire may cause a Short circuit.
• Please do make sure the name of each wire before connecting them together.
• Please check the max load of your fan light before buy. Please never overload.
• Please read the trouble shooting page if there any problems.

So easy to install!

If the regular (common) sized receivers were too big for your fan housing and this one is perfectly sized. Just make sure you have room in ceiling fan for the remote box. only 5 wire hook up. The most challenging part was placing the receiver in the canopy. Connecting the receiver to the fan was child's play and the receiver to the house wiring was even easier.

Fit Most Ceiling Fan Remote Kit

This small ceiling fan remote kit comes with a fan remote holder for the wall switch.

Mounted the remote holder by the bed. Controls lights and fan speed.

No more argue about who has to shut off the light. Just press the button to shut it or set it on a timer.

Small Receiver Fan Remote Control Kit Function!

Fan Lamp/Fan: ON/OFF

Voltage: 85V-120V/60HZ

Max Power:(Fan:145W,Lamp in total:500W)

Please do not overload!! (Please do check your fan light load before buy, or it will reduce the life of the fan remote control kit badly.)

Aubric Universal Ceiling Fan and Light Remote Control Kit

• Say goodbye to single control to your ceiling fan and light via pull chain or wall switch! Let our Aubric fan remote control kit help you to convert your traditional ceiling fan with light into a remote controllable one. It’s easy to control your fan and light from anywhere at any time!

• Aubric universal fan and light remote control is suitable for most three speed ceiling fan light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and Others well-known brands. Upgrade your pull chain ceiling fan or wall switch ceiling fan light with this wireless controller in few steps.

RF Remote Control

Simply adds this fan controller to your ceiling fan to make it remote controllable. Change your fan speed or turn on/off light from anywhere! Please note the receiver does not have the function of reverse.

3 Speed Control & Timer Function

The wireless ceiling fan control enables you to adjust the fan 3 speed, turn on/off light (no dimming), and time schedule settings. Make your life easier and more convenient.

Wall Moutable Remote Control

The remote control is wall mountable with the included holder. Make it work just like a wall switch. No need to look for remote control everywhere.

Easy Installation

1. Remove your fan canopy.

2. Wire the receiver to fan and light correctly.

3. Fix the receiver in the canopy.

4. Close your fan canopy.

Option for Beep ON or OFF

It is designed with a beep sound for confirmation of each operation. To turn it on or off, re-power the receiver and within 5 seconds, long press the "STOP" button until you get 3 beeps.

Universal Fit

Aubric universal ceiling fan remote control kit works well with most of ceiling fan with light, like Hunter, Harbor Breeze, Westinghouse, Honeywell and others well-known brands.

Universal Ceiling Fan Remote Control Kit

The remote control has been paired to the receiver when sealed in factory. You just need to power on the receiver with correct wire connection and install batteries to the remote control. That's it!

2. To Pair With Multi Remote Controls

Each receiver can be paired up to 5 remote controls.

Simply power off the receiver and then power it back on. Within 5 seconds, press the "Hi" & "Light" buttons until you get 3 beeps from the receiver. The new pairing is complete.

3. To Unpair A Remote Control

Simply press the "Stop" and "2H" buttons until you get 3 beeps from the receiver, the remote control is removed from the receiver.

Product description

smart wifi wi-fi ceiling fan remote control kit Hampton Bay Hunter Harbor Breeze Receiver wireless wifi device wor k with Alexa Echo Google Assistant replacement remote fan controller kit hampton bay ceiling fan remote harbor breeze ceiling fan remote hampton bay ceiling fan remote kit hunter ceiling fan remote kit Smart Life App, No Hub required

• 💛UNIVERSAL EDITION - Eogifee Smart WI-FI Ceiling Fan Remote Control Kit compatible with most ceiling light fans, well adapted to Hampton Bay and Harbor Breeze fans, Hunter etc. This wireless Wifi controller kit converts traditional ceiling fan into a smart wifi controllable one. Multiple devices can be installed separately in a house, and the devices can be controlled by setting different names. If you wanna control by voice, you must have smart speakers, such as Amazon Echo, Google Assistant.
• 💛INTELLIGENT CONTROL - Can be used at the same time: Remote control, APP, Voice. Compatible with Alexa and Google Assistant. No matter where you are, you can monitor and control your fan through your Smartphone using the SMART LIFE App. App is free, No additional fees. Just support 2.4 GHz frequency WiFi network. Remember convert your wifi to 2.4Ghz when you wanna install your device.
• 💛SMALL SIZE - Just need a super small space to install the receiver unit into most fans. This provides greater convenience for upgrades. Please check the size of mini receiver to ensure that there is enough space in the fan roof.(Receiver's L*W*D: 2.75*2.08*0.87 inch)
• 💛NEW TECHNOLOGY & MULTIFUNCTIONS - 4 Speeds for fan: High/Medium/Low/OFF. 12 Hours timing by APP, from 1H to 12H. 4 Timing by remote, 1H/2H/4H/8H. Light control: ON/OFF (not dimming,no reverse function). Beep ON/OFF setting. Optimized receiver has zero delay response, overload protection, no switch electric arc, zero cross switch technology.
• 💛NOTE & WARRANTY - If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together. 30 days full refund, 12-months warranty and 24 hours technical customer support.

Product features

Eogifee Smart Universal Ceiling Fan&Light Remote Control Kit

NOTE

• Timing function cannot be controlled by voice.
• Support 2.4GHz WiFi(not 5GHz). Remember to convert the frequencyof your wifi to 2.4GHz. If it can't work,please check if the name of your 2.4GHZ NET is the same as your 5GHz net.
• Please measure the space size of your fan to ensure that the fan has enough internal controls to accommodate our small receiver.
• Before wiring, please check the instruction or check the label on the line to avoid wrong wiring.
• The product does not contain batteries.

Controlled by Remote Control, Voice, Phone App

• Compatible with smart life APP, Alexa, Google Assistant, Tmall Genie
• Only Support 2.4GHz Wifi
• Connections: Radio Frequency
• Batteries: 2 AAA batteries required

Multi-Function

• From 1-12 Hours Timing by App
• 4 Timing by remote,1H/2H/4H/8H
• Turn on/off Fan, adjust the speed of fan with App, Voice, Remote control
• Turn on/ off Light, not dimmable
• Turn on/off the beep prompt tone

Small Size Receiver

• If you have mini ceiling fan size, the space is not very large, please choose Eogifee's small size receiver
• Please review the imgae of the dimension of receiver carefully to make sure there is enough space in the canopy of your fan before order
• If you wanna use the dimming function of the Incandescent, or wantna switch the settings of 1 to many or 1 to 1 at any time.Please choose Eogifee 53T small receiver kit

How to connect the fan to APP(Free App)?

1. Connect the fan receiver according to the instructions, turn on the power, Go to next step if the fan can be controlled by remote successfully.
2. Download SMART LIFE App, then Login in.
3. Tap the icon "+" on the top right corner of home page, select "Small Home Appliances", then select "fan", and then connect to 2.4G WIFI network. Enter accurate WiFi name and password, then next step.
4. Turn on the ceiling fan power. Press and hold "8H" button in remote for more than 3 seconds and wait. You will hear a single beep " B....." from receiver.
5. Select "EZ mode"(default mode) , tap "Confirm indicator rapidly blink", and tap "Next".
6. Adding device, please wait for connection. After the connection is successful, you can use the phone to control.

There are 2 network pairing modes: EZ and AP. If you failed to connect fan to APP with default mode, please try to select "AP mode". Please follow the steps in instruction.

Step One

Login Smart Life APP, click on the added device on the homepage. Enter the device control interface.

Step Two

Click the icon(Like a Pen) in the upper right corner of the device control interface.

Step Three

Click "third-party control", you can choose alexa or Google Assistant, etc.

Step Four

Choose your control device and login to complete the pairing.(Please confirm Alexa or Google Assistant app has been downloaded)

Product description

(Remote Only) -Pikeman

• It is only a transmitter. This Package does not include a receiver. If your original transmitter looks different from this product, Please purchase a complete kit with a receiver in the store. Note: seasonal changes of forward and reverse cannot be changed with remote
• This transmitter is to be purchased only to replace the remote your Fan was originally installed with. You cannot simply add this unit to any Fan that does not already have a receiver pre-installed
• Look inside the old remote with the battery cover off. There is a series of "dip" switches . with a pen, slide the switches in the new remote to match the same pattern as the old remote. Replace the battery in the new remote and things should work
• This is the remote control for the Ceiling Fan. As long as the Fan has the receiver in it this remote will work with your Harbor breeze Ceiling fans, just remember to set the 4 dip switches inside the battery compartment(they are kinda hidden behind the slot for the battery itself)
• Make sure the original remote control model is KUJCE9103、FAN-11T or FAN-53T, or make sure your original remote control model is FAN-HD5 or FAN-35T, otherwise the remote control may not match your receiver.

User questions & answers

Question:	Does this work with harbor breeze monte carlo fan 5di44rbd
Answer:	I’m not sure if it would work or not. I googled broken harbor breeze remote and first thing that popped up was an amazon link with a picture of a remote that looked exactly like my broken remote so I took a chance and happened to get lucky and find a remote that worked for me. Good luck!
Question:	I have a wall mounted 3 speed fan control and light dimmer. Can I install the receiver in the wall box
Answer:	No, this module is too big to fit in a wall box. Theoretically it could perform the function from there if there were 2 "load" wires to the fan, but it wouldn't fit there. Fan must be wired for constant power, and this goes in the gap of the fan's mounting bracket under the ceiling cover.
Question:	Made in usa
Answer:	Since when has anything been made in usa
Question:	Why would you onclude the fcc id in the description for a frequency that is not supported? kujce
Answer:	Because the frequency it use is well below Aeronautical Frequencies...looking at the cart its not even in an Audible range!! 0 to 10 HZ