9 best dewalt 15 gauge finish nailers

Product description

The DEWALT DWFP72155 15 GA PrecisionPoint™ "DA" Style Angle Finish Nailer drives 15 Gauge DA style nails from 1-1/4 in. to 2-1/2 in. making it ideal for interior trim, baseboards, crown molding and more. With its 16 in. On-center gauge to measure exactly 16 in. from end to nose, and PrecisionPoint™ technology for precise nail placement, this tool is ready to work.

• Precision Point™ Technology: Precise nail placement due to a smaller nose, compared to current DEWALT nailers, and no need to compress the contact trip to actuate the tool
• Long-life, maintenance-free motor helps to keep from staining the work surface
• Tool-free jam release mechanism for easy nail removal
• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is the nail recommended for this tool easy to find, is there troble in finding nails for this tool
Answer:	"DA" angled finish nails are 35 degrees.
Question:	Is it a pneumatic tool
Answer:	Yes, because these nails are DA-style (34° angle), just like the Bostitch btfp72155.
Question:	Is the dewalt dwfp72155 15 gauge a 34 degree nailer
Answer:	Traditional Bostitch's FN style (25 degrees) is unique to its brand. However, the newer Bostitch DA style (34 degrees) of finish nailer will work with the corresponding angled finish nails.
Question:	What about recoil
Answer:	I would call a local tool repair shop. Unless you acsess the parts detailed list online at Hitachi website.

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Diagnostics with LED indicator Communicates battery charge status: charged
• Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
• Automatic shut-off protects excessive discharge of vehicle's battery
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Can I use this for trim
Answer:	I plan to use mine for trim shortly (shorter nail). Used longer nail for 3/4" pine tongue and groove wall. Love the product.
Question:	How many finish nails does one battery fire? I know the battery size will influence the number significantly but is it closer to 150 or
Answer:	I use mine all day and on a fresh battery it will go the distance. I have never felt like the batteries were an issue vs amount of nails shoot
Question:	Will this gun shoot staples also
Answer:	no 1 1/4'' to 2 1/2 15ga finish nails only.
Question:	Does this include the battery, charger and bag
Answer:	Yes, It includes both

Product description

This product features a 20-Degree finish nailer, bump operating mode, and integrated LED lights as well. It is convenient and works effectively. It is definitely a great quality product.

• Integrated LED lights
• Bump operating mode
• 20-degree finish nailer
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is it brushless
Answer:	I believe that it is brushless. I have 2 of the nail guns and they are great. Works fast and sets the nails ever time. Battery lasts a long time as well.
Question:	Just got the nail gun. somehow it jammed as soon as placed brads in it. it seems to flip the brad. how is that possible? not happy i'm wasting brads
Answer:	Ummm, yes, this is a finish nailer, big difference from a brad nailer. Make sure you are using 16 gauge 20 degree nails, not 15 gauge, and definitely not 18 gauge brads. This is a great nailer, but I'm not tossing out my Bostitch air nailers to replace it! This is a great supplement to the air nailers for small jobs that only last a day or so.
Question:	Have they sorted out the Low nail depth issue yet? After some use my contractors say it wont Drive 2-1/2 nails
Answer:	This is my second Dewalt finish nailer and I have never had any issues with it not driving 2 1/2" nails. That being said, if you are driving several 2 1/2 nails then you need to make sure you are working with a fully charged battery. I have noticed that if the battery gets to a 1/3 charge it will not drive 2 1/2" nails as deep. It also depends on the type of wood (hard or soft).
Question:	Can this be used for blind nailing tounge and groove paneling
Answer:	Yes but don't waste your money if you plan on using this gun a lot. I've had mine in the shop 3 times in the year I've owned it. Buy the 18 volt version is more powerful and breaks way less. I've used mine for the last 6 years at least. This new gun will not even drive 2 1/2" nails consistently through soft wood let alone any hard wood.

Product description

The NT65MA4 15-Gauge Angled Finish Nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. The NT65MA4 nailer has a compact body and angled magazine making for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

• 15 Gauge Finish Nailer
• Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required
• Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
• 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece
• At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability

User questions & answers

Question:	will bostich FN type nails work in this gun
Answer:	No, you must use DA-type nails. The good news is that 95% of nail brands are DA-type: Hitachi, Senco, Nail Pro, Fastener USA, and so on.
Question:	Is this similar to Makita nailer and does use other brands of nails
Answer:	Good morning, This tool accepts the following. It doesn't have to be Hitachi nails. Have a wonderful day. It accepts 15-gauge nails from 1-1/4" long to 2-1/2" long.
Question:	Can I purchase a nose cap for this nailer.. mine didn’t come with one
Answer:	Look carefully at your gun. The nose cap is mounted, for transport, on the bottom end of the magazine. It's black, and easy to miss. I returned my first gun, thinking that it was missing the nose cap, as well.....
Question:	Nails for this item
Answer:	Use only DA-type nails (i.e., NOT Bostitch FN-style).

Product features

Selective Actuation Switch

Allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required

Tool-less, Easy to Clear Nose

For quick nail extraction should a nail jam during use

360-degree Fully Adjustable Exhaust Portal

Directs air exhaust away from the user or work piece

Factory Installed Air Fitting

Angled upwards to keep the compressor hose conveniently out of the way of the user and work piece

Product description

Precision point technology: easy nail placement as a result of a smaller nose compared to current DeWalt nailers and No need to compress the contact trip to actuate the tool. Kit includes: nailer, 1/4" swivel fitting, sample finish nails, carrying case and extra no-mar tips.

• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Rear exhaust to keep contaminates away from work
• Drives straight 16ga finish nails from 1-1/4" to 2-1/2" length
• Tool-free jam release mechanism for easy nail removal
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is this gun supposed to prevent dry-firing when you run out of nails? If so, mine does not work
Answer:	Yes it comes with 1 battery and a charger
Question:	Where can you buy the yellow plastic bumper tips
Answer:	Yep
Question:	Description states it's "corded - electric," but the picture shows a pneumatic fitting. So, is it electric or pneumatic
Answer:	It needs both but don’t buy its100% trash it struggled to fire the 2 1/2 inch nails it lasted maybe 60 nails cleaned it but never came back to work trash trash trash don’t buy buy the paslode guns
Question:	Can you buy tips
Answer:	Yes, the nails are within the range to be compatible. The nail collation of a "DA" angle is 34 degrees.

Product description

Innovative DEWALT technology allows you to use the D51257K with or without oil, offering you the versatility to complete a wide range of jobs quickly and efficiently. With its operating pressure of 70-120 PSI, this versatile nailer takes one- to 2-1/2-inch 16 gauge straight collated nails, and provides the freedom of tool-less perks including a 360 degree rotating exhaust cap, nail depth adjustment, and a front opening that releases any jams for smooth, reliable performance. The D51257K comes with a carrying case; 1000 two-inch finish nails; a low-profile, no-mar pad; a pre-installed sequential action trigger; and a trigger lock off. (Safety Glasses are not included).

From the Manufacturer

The D51257K ushers in the next generation of DEWALT finish nailers. Making use of Sealed Lube Dual Technology, allows the unit's motor to work as either an oil free or an oil lubricated unit. Tool-free features include: an adjustable belt hook, nail depth adjustment, jam clearing, and a 360° rotating exhaust cap. Uses 1" to 2-1/2" (25.4 mm - 65 mm) 16 gauge straight collated nails and includes carrying case, 1000 of 2" finish nails, a low profile no-mar pad, a pre-installed sequential action trigger, as well a trigger lock off. (Safety Glasses are not included).

• Sealed lube dual tech: motor works as an oil free and oil lube unit.
• Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust
• Uses 1-inch to 2-1/2-inch (25.4 milimeter-65 milimeter) 16 gauge straight collated nails,
• Includes carrying case and sample finish nails ( safety glasses are not included.)
• Low profile no-mar pad; Sequential action trigger installed

User questions & answers

Question:	I am trying to decide between this and the 15 gaug angled one for light use (base, crown installation). Can anyone recommend one over the other
Answer:	I do not have any trouble, Home Depot caries them.
Question:	Do I have to use Dewalt finish nails? Can I use other brand? e.g. Porter-Cable finish nails
Answer:	Yes it is a pneumatic tool. I use this air nailer to install hardwood, and I love it. I especially like the precision point, it’s not bulky like most other guns. Easy to place the nail right where you want it.
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Yes
Question:	What is the PSI range required for this nail gun to operate properly
Answer:	Recoil- the gun absorbs the recoilloudness- its a nail gun it makes noise. I real hear it with my earplugs in.balance- its top heavy but that helps with the recoilweight- 4.2lbsnails- 34 Degree 1-1/4 to 2-1/2 in will work

Product features

DEWALT D51257K 1-Inch to 2-1/2-inch 16 Gauge Finish Nailer

Product description

This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box

• AirStrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose
• Toolless depth-of-drive adjustment helps protect work surface and allows proper setting of finish nails
• Dual chemistry charger charges 18V ONE+ batteries in as little as 1 hour
• Indicator lights show status as batteries are charged and maintained
• This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box

User questions & answers

Question:	Will my 16-guage finish nailer shoot 18-guage brads
Answer:	No, just a fully charged battery and lots of 16-gauge finish nails.
Question:	will this shoot staples
Answer:	There are a few numbers on it. Most likely the part# is P102. But there’s also a 130429135 that could help.
Question:	Does this product require any other items to make it work -- i.e. cartridges of any kind
Answer:	Yes on the amperage but I have no idea about the warranty.

Product description

These 15-gauge angled finish nails for use in finishing applications. These steel nails feature galvanized finishes which are glued collated. The convenient 2500-piece Pack allows you to always keep your nailer loaded.

• 2-1/2-inch length
• Galvanized angled finish
• Suited for outdoor use
• Quantity: 2, 500 per box

User questions & answers

Question:	what is the angle of these nails
Answer:	ereplacement.com
Question:	Are these nails suitable for dewalt model dcn650 angled finish nailer
Answer:	Pneumatic, I don't recommend this gun it lacks the power to drive the nails all the way in. Even operating at max operating pressure.
Question:	What angle are they
Answer:	If you are referring to the no mar nose piece, yes they are available at most online parts stores.

Product description

The Zenith trim puller is a revolutionary, patented tool that does all the work of a pry bar and claw without damage. The Trim Puller is designed specifically to safely and easily remove baseboards, molding, door casings and decorative panels without damage to the trim or to the wall and without the need for a shim or small board spacer. It has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall. Ideal for repair and remodel projects where care and precision are needed including cabinets, countertops, Trim, flooring and many more. An impact absorbing EDPM rubber handle provides increased user comfort and its robust 48 Rockwell c heat treated steel construction provides durability. If demolition and Trim removal for remodeling is your aim well the Trim Puller will make fast work. Save Time, Save Trim, Save Cash and Stop Damaging Walls. Switch to the Trim Puller Today for all your remodeling and demolition projects.

• IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing baseboards, molding, door casings, decorative panel and even nailed or glued countertops; IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!
• WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
• REVOLUTIONARY, PATENTED TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or small board spacer.
• COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
• DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.

User questions & answers

Question:	can this be used with gypsum board
Answer:	Yes, it can be used on gypsum board. It will work well because has a large contact area and wedge, that will help extracting a board. This tool has a sharp blade and is very rigid, what will help inserting it, and removing board easier.
Question:	What is the functional difference between this and the Zenith Trim Puller
Answer:	This has an additional pry bar on the handle, the center wedge part is closed instead of open, and it's a few inches longer and also about an inch wider. The trim puller was designed to be used with side to side torque ("pulling the puller"), whereas you would be mostly whacking this with a hammer on the back.
Question:	I need to remove about 4' x 4' engineer wood flooring glued to concrete slab. Would this tool be helpful? Was going to buy some standard chisels
Answer:	Absolutely yes, the unique design and strength of the tool is great for prying loose anything. I watched the demonstration on YouTube and knew I needed it for flooring and walls.
Question:	Why is it cheaper for one that's $29 but when you buy two it's $115 it would be cheaper to buy one at a time
Answer:	That would be seller setting that price, and not like can't up quantity on single tool.

Product features

Trim Puller by Zenith Industries

The Trim Puller by Zenith is a revolutionary, patented new tool for quickly and safely removing baseboards, trim, molding (or moulding), tile, wood panels and floors, chair railing, carpet tack strip and more, without damaging the materials you are removing so you can reuse them and, more importantly, without damaging your drywall.

How many times have you had to go back and repair holes in the drywall caused by other tools that weren't made for these tasks? The Trim Puller will save you time and money on your DIY and professional home improvement projects time and time again.

Made from durable, heat-treated steel, it is sure to last a long time and the handle absorbs any vibration and will not hurt your hand. Try it today! You will be glad you did.

15 degree integrated center wedge

Automatically begins the removal of trim, baseboard, tile, wood floor or other materials with ease. It does the work for you!

3 contact points

Large, flat contact area distributes the force and prevents damage to drywall, sheetrock or other materials.

EPDM handle absorbs vibrations

EPDM handle absorbs vibrations from hammering on the metal. Won't hurt your hand like a crow bar. EPDM stands up great to all weather, heat, ozone and is insulating also.

Step 1

Use a utility knife or painters 5-in-1 tool to score the top of seam where the trim meets the wall. This will prevent tearing the paint from the wall.

Step 2

Position the Trim Puller's front face against the wall with the sharp edge on the seam where trim meets the wall. For best results start at the end of baseboard strip.

Step 3

Strike the top of the Trim Puller with a hammer or hard mallet, driving the Trim Puller between the trim and the wall. The wedge will begin to separate the trim from the wall automatically.

Step 4

Once the Trim Puller is wedged between the trim and wall, gently pry the trim away from the wall in a twisting motion creating a gap of approximately 4 to 8 inches. Repeat steps 2-4, moving the Trim Puller along the wall in 12 inch increments or as needed. The gap will increase with each pull until removed.