14 best undercoat paint for car

Product description

Dupli-Color UC101 Paintable Rubberized Undercoat (16 oz) - 6 Pack

• Paintable

User questions & answers

Question:	does it dry black or dark brown
Answer:	Yes it dries like a flat black
Question:	Direct to metal
Answer:	No I use this product as a interior coating on hardwood planters. Easy application and I am able to coat more planters with spray verses brush on product 5 stars and more time for me
Question:	does this product dry black or dark brown
Answer:	Flat black
Question:	Doe's it dry black
Answer:	A flat black

Product description

3M PPS Mini Lids and Liners Kit contains 50 disposable lids, 50 disposable liners and 20 sealing plugs for use with the original PPS spray gun system, an all-in-one solution for measuring, mixing, filtering and spraying paint materials. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. Simply place a liner in the reusable paint cup, mix the paint, snap on the lid, attach the locking collar and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. Each lid strains paint material with a built-in 125-micron filter, commonly used for waterborne paint materials. Specially designed PPS stainless steel metal adapters let you use the PPS system with virtually any spray gun.

• USE WITH ORIGINAL PPS SPRAY GUN CUP – Includes 50 disposable lids and liners for the mini 3M PPS paint cup. Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more
• VERSATILE USES – Mini 6-ounce size ideal for applying smaller amounts of paint for projects including cars, boats, furniture, equipment, home, arts and crafts
• PART OF AN ALL-IN-ONE SOLUTION – Use with the original ­PPS paint cup and collar (sold separately) and virtually any handheld spray gun with adapter to enjoy the efficiency of all-in-one measuring, mixing, filtering and spraying of paint materials­
• LESS WASTE, MORE EFFICIENCY – Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems
• 360 DEGREE PAINT RANGE – System design allows you to consistently spray at any angle, even upside down
• 125-micron FILTER – Each lid has a built-in fine-mesh 125-micron filter, commonly used for waterborne paint
• SEALING PLUG PROTECTS PAINT – Includes 20 sealing plugs to temporarily cap and protect paint for reuse

User questions & answers

Question:	The 3M kit #16325 is for 28oz cups and lids, but the description on the product details says these are 3oz capacity. Are these the 28oz capacity
Answer:	There are errors in the listing. The description is wrong and so is the photo. 3M 16325 is a kit of 28 oz. lids and liners (25 each) plus 10 sealing plugs. The lids will be blue for water borne paint and will have the full diameter filter embedded.
Question:	Does this come with a cup & collar like usual
Answer:	Thank you for your question! No, the 3M 16314 PPS Minii Size Kit with 125 Micros Filters includes; 50 lids, 50 liners, and 20 sealing plugs. You may wish to consider the 3M 16115 PPS Mini Cup and Collar. https://www.amazon.com/16115-PPS-Mini-Cup-Collar/dp/B000RHWLUI/ref=sr_1_1?keywords=B000RHWLUI&qid=1566227642&s=gateway&sr=8-1
Question:	anyone had these lids leak? first i thought it was the adapter, had two lids in a row leak. went back to an old lid i had laying around...was ok
Answer:	I had one leak with some very thin enamel paint, but I'm pretty sure it was user error. I didn't get the lid pushed down into the liner all the way before putting the lock ring on (lid or lock ring slightly cocked or something.) Haven't noticed any issues leaking around the lid to spray gun connection using a PPS spray gun (re-using tips a lot.) . Wonder if the box has a date / batch number? Might be worth a call to 3M for some replacements.
Question:	Which is best for spraying clear cabinet finishes, 125 or 200 micron? Thanks
Answer:	125 micron is for water-borne and 200 is for solvent-based coatings. I hope this answers your question.

Product description

Specifications:

Model: SG10

Rated pressure: 0.4-0.7Mpa

Maximum pressure: ≤9kg/cm squared

Material: metal

Nozzle diameter: 9mm/0.36"

Length of feeding tube: 240mm/9.45"

Function: allow chassis armor underbody coating to be evenly sprayed on car chassis for rust proofing



Package Included:

1 X Car Undercoating Spray Gun



1 X 750ML Bottle





Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.

2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.

• ▶Durable pneumatic air application gun that's excellent for applying automotive rust proofing, rubberized undercoating, chip guard, truck bed liner and other general purpose coatings. Gun can be used with oil, solvent and water-based materials.
• ▶Precisely machined light weight well-balanced gun that can be used for applying different viscosity coatings and various textures.
• ▶Applicator gun has a die-cast aluminum alloy body with an easy grip trigger handle.
• ▶Function: allow chassis armor underbody coating to be evenly sprayed on car chassis for rust proofing
• ▶All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution.

Product description

Al's Liner rubberized undercoating is a paintable, rubber-based undercoat for undercarriages. Al's Liner rubberized undercoating is designed to protect undercarriages from the harsh abuse of day to day operations. Our formula dries quickly and protects against rust. Another great quality is the sound deadening properties. Not only will this product protect undercarriages from damage, but it will also significantly reduce road noise.

• Rust preventative formula protects against rust on cars, trucks, trailers, ATVs, and more
• Excellent sound deadening properties
• Will not dry out, crack, or peel; never becomes brittle
• Paintable, quick dry formula (30 minute dry time)
• Heavy duty

User questions & answers

Question:	I need to undercoat the underneath of my trailer and it is a wood. Will this product stick to wood
Answer:	I think it will stick to wood
Question:	Anyone used a gun? I spray often with a gun but curious what needle is best for this stuff
Answer:	I used the TCP undercoating spray gun, stuff is thick not sure it would work in a standard spray gun.
Question:	Can you apply it with a brush
Answer:	Yes, we applied with a brush to underside of truck fenders and bed.
Question:	What color is it
Answer:	It is Black. It is paintable once dried.

Product description

POR-15 Gloss Black Top Coat is a direct-to-metal (DTM) paint designed to work incredibly well in all applications where there is a need to help preserve substrates susceptible to corrosion. Under exterior exposure POR-15 Top Coat has exceptional long-term sheen and color retention. POR-15 Top Coat can be applied directly to cleaned bare metal substrates or previously painted surfaces, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long-lasting protection. POR-15 Top Coat provides excellent adhesion and when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier to corrosion.

• Direct to Metal (DTM) Rust Preventive Paint
• No Need for Primer or Undercoat
• Use over POR-15 Rust Preventive
• UV resistant
• Fit Type: Vehicle Specific

User questions & answers

Question:	can you use on engine block
Answer:	We found that the bright red becomes a light pink within a year or so. I am not sure how it would react in a high heat application like an engine block.
Question:	Do I need to paint over this with the por 15 rust prevention paint or is a few coats of this stuff sufficient? going on the underside of a chevy truck
Answer:	POR 15 rust prevention goes on first. Top Coat provides UV protection on exposed surfaces. I doubt you'd need it on the underside if it isn't exposed to much light.
Question:	How do I apply this over por15? Can I coat this on top of por15 as additional layers(up to 4-5) or wait til the por15 sets, sand and then top coat
Answer:	"Top Coat over POR-15 when dry to the touch with slight finger drag usually 2 to 6 hours. Topcoating over cured POR-15 Rust Preventative Paint or any painted surface requires lightly sanding before applying. Top Coat can take 3-4 days to reach max hardness, and longer in temperatures below 55 degrees F." - label directions
Question:	Can top coat be sanded
Answer:	I'm using gloss black and when it is dry it is hard as paint. I'm sure sanding will be fine.

Product features

POR-15 Top Coat DTM Paint

POR-15 Top Coat paint is a DTM ( direct-to-metal ) coating designed to work on prepped bare metal and work incredibly well in all applications where there is a need to help preserve substrates susceptible to corrosion. POR-15 Top Coat safety colors comply with OSHA required/recommended color codes for marking physical hazards and designating caution, to include protective equipment. Under exterior exposure POR-15 Top Coat has exceptional long-term sheen and color retention. POR-15 Top Coat can be applied directly to metal substrates or previously painted surfaces, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long-lasting protection. POR-15 Top Coat provides excellent adhesion and when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier to corrosion.

Product description

BlackTop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. BlackTop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. BlackTop may be used alone as a resilient coating but it will not offer the ultimate rust protection unless it is used in combination with RustSeal. For the best stop rust & ultraviolet protection, first apply RustSeal to permanently seal the surface and then topcoat with BlackTop for an incredibly tough and professional looking finish. Available in Gloss Black, OEM Satin Black & Flat Black. Like RustSeal, BlackTop dries to a rock hard yet flexible coating that can be readily applied to chassis, coil springs and light weight panels. BlackTop also has high heat resistance and can be applied to almost all automotive applications except exhaust systems.

• BlackTop is very easy to apply to apply by brush, roller or sprayer. BlackTop provides Permanent UV stability with No chalking or fading
• BlackTop is a Rock hard permanent topcoat and also a Flexible coating which expands & contracts
• BlackTop features High temp resistance: 500F
• BlackTop features superior flow and leveling. When brushing, the brush marks flow out beautifully making it looked like a sprayed surface
• BlackTop may be used alone as a resilient coating but it will not offer the ultimate rust protection unless it is used in combination with KBS RustSeal

User questions & answers

Question:	what reducer do you use for spraying
Answer:	KBS #1 Thinner or Xylene.
Question:	Do I have to use any rust seal or anything else to have a good coating
Answer:	It is ideal to put down RustSeal first as a primer nut that is NOT necessary. BlackTop will stick really well to a properly cleaned (KBS Klean) and etched (RustBlast) surface and provide a very durable and flexible finish.
Question:	I was thinking about using this to undercoat my cab and bed as well as paint firewall/inner fenders. Can I put this coating over bare metal
Answer:	Hello Nicole, Yes you can but If you are painting on a bare metal surface I would scuff up the surface with a very fine grit sandpaper first or you can purchase a chemical product that will prepare the surface before painting. This company makes good products but please follow instructions carefully. Best Wishes.
Question:	what reducer do you use to spay on
Answer:	KBS #1 Thinner or Xylene.

• SOUND DEADENING SPRAY: Spectrum liquid sound dampening material is a high heat, water based viscoelastic polymer, formulated and tested by Second Skin to adhere to metal and stop it from vibrating. Stop the vibrations, stop the noise!
• CAR SOUND DEADENING & INSULATION: Used to dampen vibrations and stop thermal transfer on metal surfaces in all types of vehicles (cars, boats, trucks). Spectrum also works well on metal warehouse carts, sub-woofer boxes, and HVAC ducts. Spectrum works by stopping vibrations. It will NOT block or absorb airborne sound waves.
• ADVANTAGES OF LIQUID SPRAY: Spray Spectrum into hard to reach places that sound deadening mats have trouble, such as the undercarriage of the car and the wheel wells. Spectrum is temperature rated to 400 F, so you can even use it on the firewall!
• PAINT OR SPRAY ON SOUND DEADENING: Applied with a paint brush/roller or spray gun and air compressor. We recommend applying two layers of Spectrum Liquid Deadener to a total thickness of 2-3mm (thicker than a quarter). Max: 5mm
• PROUDLY MADE IN THE USA

User questions & answers

Question:	I live in Arizona...Will this product help keep the internal temperature of the car lower during summer months, much like a windshield shade
Answer:	This product does resist heat transfer and will help keep the heat out, but I wouldn't compare its effectiveness to a windshield shade (Probably much less effective? Have not tested one vs the other... good idea though!). Most people use it to resist heat transfer on a car's firewall or undercarriage. If I wanted to insulate a vehicle's roof, my first priority would be an insulating foam (like Second Skin's Mega Zorbe) or jute insulation (like Second Skin's Heat Wave Pro). You can combine with Spectrum for additional benefit, but one of those materials would be priority #1.
Question:	How tuff is this product
Answer:	Its pretty tough, we have it sprayed onto our sprinter van conversion floor, its holding up great.
Question:	If I use this in my wheel well and it gets wet would that be a problem
Answer:	Its water based but once it dries its waterproof. Just like water based paint, when dried it won't come off with water!
Question:	I'm looking to apply this to the inside of a Jeep Wrangler roof. How will it apply to the fiberglass top
Answer:	Spectrum needs a self etching fiber glass primer to bond to the fiber glass surface. Once the primer is cured Spectrum will bond very well, apply your (3) 1 mm coats to achieve recommended thickness. 30-60 minutes between coats above 50 degrees F. You can find this primer at your local paint or body shop, just ask for "self etching fiberglass primer for a water based acrylic polymer paint."

Product features

Stop unwanted noise with the right sound deadening materials.

At Second Skin, we pride ourselves in offering best-in-class solutions to help you eliminate unwanted noise and soundproof your car. Everything we sell has been tested in the field and in the lab to ensure you get the best possible results. We offer a comprehensive line of the best car insulation solutions for your vehicle. Whether you have rattling metal distorting your speakers, a car restoration side-gig, or just want to create a bubble of comfort for yourself as you drive down the highway, we have the high quality materials that will get you to your destination.

Why do cars make so much noise?

Noise inside the passenger compartment of a car comes from one of three sources:

1. Wind Noise: Noise that enters through gaps, holes, and open windows.
2. Structural Noise: Noise that is generated by vehicle mechanical systems and travels through the vehicle structure before radiating into the passenger compartment.
3. Airborne Noise: Noise that is generated by vehicle systems or an external source and enters the passenger compartment by first traveling through air, then passing through a body panel, and finally reradiating into the passenger compartment.

To fix wind noise, you need to plug the holes. To stop structure borne noise, you have to damp the metal. To eliminate airborne noise, you need to block it with a noise barrier.

Quality materials matter. You’ll only make that mistake once.

Spectrum Liquid Sound Deadener is a water-based, viscoelastic polymer formulated by Second Skin Audio for top-of-the-line vibration damping and adhesion. The acrylic polymers in Spectrum have been selected to reduce sheet metal resonance, stick to just about anything, and meet transportation safety standards. Spectrum is odorless, rustproof, waterproof, flame resistant, chemical resistant, non-toxic, and dries with a seamless, black finish. Spectrum can be applied with a spray gun, brush, or roller. For large surfaces or hard to reach areas (like the undercarriage and inside the wheel wells), spraying on Spectrum can be much easier than applying sound deadening mats.

• Apply Spectrum in 1mm layers to a recommended total thickness of 2mm.
• Easy to clean up with water within 30 minutes. Do not get on clothes or upholstery.
• Spectrum is designed to adhere to metal, but will stick to just about any cleaned surface besides plastic or a high gloss surface without a primer.
• Wait 24-36 hours before reinstalling upholstery, and one week before covering Spectrum with a bed liner or painting it.
• Spectrum is not a bed liner and can be damaged by heavy impact.
• Do not freeze! If frozen, do not move or mix until it has completely thawed.

Vibration Damper

• Stop vibrations and deaden structural noise
• Significantly outperforms asphalt and tar mats

Thermal Insulation

• Viscoelastic polymer resists heat transfer
• Temperature rated to 400 F

Reduce Road Noise

• Substantially reduce noise level in your car cabin
• Increase speaker performance

Health & Safety Tested

• Non-toxic and easy to clean up with water
• Meets all transportation safety standards

Decide

Decide what parts of the car you want to insulate first: roof, floor, doors, trunk, firewall, hood, wheel wells, or undercarriage. Insulating each part of the vehicle has its benefits. You likely need to do a little detective work to identify the noisiest parts of your car or truck. For the best results, you’ll need to soundproof all of your vehicle’s metal surfaces. Before installing any material though, step #1 is always to expose the sheet metal. For any metal surfaces behind plastic panels or upholstery, you’ll need to research how to remove them. Be careful to avoid breaking plastic trim parts or any fasteners. Detailed step-by-step guides can be found on our website or the one of the many automotive forums.

Remove

Remove all factory insulation to expose bare sheet metal. You can choose to mask off the insulation if it’s in good shape and you want to leave it. Ensure all debris, rust, and waxy oils are removed from the application surface. Clean the surface with denatured alcohol and a dry, clean rag. We do not recommend using a solvent or degreaser, as they can leave behind a film that will prevent the best bond from forming. Allow the metal to dry.

Prepare

Measure the cleaned surface to ensure you have enough Spectrum to cover the application area (1 gallon = 20 sq ft). Prep the surface for your chosen application method. The most effective way to apply Spectrum is to spray it on with a spray gun or airless sprayer. Before starting application, the panel should be masked off for overspray protection. If you use wire tape with plastic masking wrap, removing the plastic masking will be extremely easy and give you a clean cut edge. You don’t need to wear a paint mask, but it is recommended to spray in a well-ventilated area. If you’d rather paint or brush on your sound deadening, you can do that with a paint brush or roller.

Install

A primer is not needed except for plastic or high-gloss surfaces. You will need a spray gun designed to shoot a high viscosity, water-based acrylic polymer. Hook it up to a compressor with 50-80 PSI and a 6 gallon tank (reduce fill up time). Hold the spray gun 4 to 8 inches away from the panel and apply Spectrum with a slow, sweeping motion. The goal is a 1mm layer about as thick as a credit card. Always clean the spray gun immediately after applying a coat of Spectrum or it will cure in the gun. Allow 30 to 60 minutes between application layers, depending on temperature and humidity. We recommend 2mm of total thickness, but you can go up to 5mm.

Spectrum

Sound deadening is the hidden secret behind the upholstery of any car project. To reduce road noise, use Spectrum to stop the structural noise generated by vibrating metal. Stop the vibrations, stop the noise.

Sound Blocking

After you’ve damped the structural noise, stop airborne noise with a sound blocking layer covering the entire floor and inside the doors. Luxury Liner Pro has a high r-value and STC rating, making it an ideal insulating noise barrier for engine, exhaust, and road noise.

Sound Absorption

Further quiet things down inside your vehicle with sound absorption materials. Mega Zorbe has a high r-value, making it excellent for the car roof, and a high sound absorption coefficient to reduce interior echoes and improve acoustics in door cavities.

Product description

Protects against moisture, dust, heat & cold;An excellent moisture barrier for application over auto body repairs;Effective sound barrier;Provides superior adhesion;May also be used on inside of house gutters & over flashings

• Protects against moisture, dust, heat & cold
• An excellent moisture barrier for application over auto body repairs
• Effective sound barrier

User questions & answers

Question:	Can i use this for plastic
Answer:	The label says it contains Toluene and Acetone. I suspect this will melt plastic. Acetone is a pretty strong solvent.
Question:	Would this work on the bottom of Truck bed with surface rust
Answer:	Yes but you need to prime any bare metal before application per the directions on the can. POR-15 rust coating would be great to use first after removing loose rust and cleaning.
Question:	Will this be durable enough to paint the axel housing and rear diff on my f
Answer:	Yes. This is the equivalent of what modern cars are coated with in the underbody.
Question:	Can you spray this right over rust
Answer:	It is recommended that you clean and prepare the surface with a product like MetalReady prior to spraying it with POR to get the best result. Read up on how to use this product effectively and safely. If you get it on your skin, you will wear it for a week or more. It cures in humid conditions; wear a respirator prior to spraying to avoid breathing in particulates.

Product description

Spaz Stix Ultimate Black Backer is SAFE to use behind Spaz Stix Ultimate Mirror Chrome. Ultimate Black Backer seals and protects the Mirror Chrome without taking away the reflective properties. May also be used to back Spaz Stix Color Change Paints. Specially formulated for use with Lexan plastic, the unique colors of Spaz Stix Paints make your hobby project stand out. Customize your body. For Interior applications where Lexan plastic serves as the clear coat, use Spaz Stix Surface Prep (SZX90509) to keep jobs swirl and fingerprint free. Use Spaz Stix Ultra Shine Clear Acrylic Enamel (SZX90109) to seal and protect from nitro fuel. For exterior applications, seal and protect your project with Spaz Stix Ultimate Clear Coat (SZX10909).

• Includes vivid colors
• Includes flexible formula
• Includes premium hobby paint
• Made in USA
• Ready to Spray

User questions & answers

Question:	can this be used on headlight bezels
Answer:	Yes but not last
Question:	would this give a mirror effect to matte silver metal
Answer:	I don’t think so. I used it to spray a wine bottle and you can see through it but no reflection at all.
Question:	Will this work on my rc car body
Answer:	Yes it works great on RC Lexan bodies. We used the Ultimate Mirror Chrome Aerosol Paint 3.5oz without the backer. Just tape off what you don't want chrome, spray the inside of the body in several light coats until you get good even coverage. Back it with black, and then paint everything else. Best chrome finish you can get for a lexan body at this time. Paint the colors darkest to lightest. The chrome can be saved for last if the body color is dark. If it is light do the chrome, back it with black, and go to the next lighter color to prevent color contamination.
Question:	Can this be used as a backer for regular polycarbonate paint...or is it just for mirror chrome
Answer:	It is a lacquer based primer so I would say you can overcoat with any lacquer based paint.

Product description

3M PPS Mini Lids and Liners Kit contains 50 disposable lids, 50 disposable liners and 20 sealing plugs for use with the original PPS spray gun system, an all-in-one solution for measuring, mixing, filtering and spraying paint materials. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. Simply place a liner in the reusable paint cup, mix the paint, snap on the lid, attach the locking collar and you’re ready to spray. With a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. Each lid strains paint material with a built-in 200-micron filter, commonly used for solvent-based paint materials. Specially designed PPS stainless steel metal adapters let you use the PPS system with virtually any spray gun.

• USE WITH ORIGINAL PPS SPRAY GUN CUP – Includes 50 disposable lids and liners for the mini 3M PPS paint cup. Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more
• VERSATILE USES – Mini 6-ounce size ideal for applying smaller amounts of paint for projects including cars, boats, furniture, equipment, home, arts and crafts
• PART OF AN ALL-IN-ONE SOLUTION – Use with the original ­PPS paint cup and collar (sold separately) and virtually any handheld spray gun with adapter to enjoy the efficiency of all-in-one measuring, mixing, filtering and spraying of paint materials­
• LESS WASTE, MORE EFFICIENCY – Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems
• 360 DEGREE PAINT RANGE – System design allows you to consistently spray at any angle, even upside down
• 200-micron FILTER – Each lid has a built-in fine-mesh 200-micron filter, commonly used for solvent-based paint
• SEALING PLUG PROTECTS PAINT – Includes 20 sealing plugs to temporarily cap and protect paint for reuse

User questions & answers

Question:	Can I just get 1 lid and 1 cup
Answer:	they are usually sold in 1/2 boxes of 25 or full boxes of 50
Question:	How many of each: cups, liners and filters in the Mini - 6 fl. oz. (180 mL) set kit? Thank you
Answer:	50 liners 50 lids, the lids have the filter built in, the cups are the holder for the liners. You may want the graduated inserts for proper measurement, be sure it is the correct one. The 3 oz. and 6 oz. fit in the mini cup but have a different insert measure.
Question:	Does this work with the 3M 26580? The 3m site says it is series 2.0...but I don't see series 2.0 liners anywhere
Answer:	Thank you for your question! No, the 3M 16000 Standard 22 fl. Oz. Lids and Liners would not be compatible with the 2.0 PPS System. You may wish to consider 3M 26000 Spray Cup System Kit. Each kit contains 50 disposable lids, 50 disposable liners, 1 reusable hard cup, and 32 sealing plugs. https://www.amazon.com/3M-Spray-System-Micron-Filter/dp/B0070FK92W/ref=sr_1_1?keywords=3M+26000&qid=1571059498&sr=8-1
Question:	which micron filter is best used for primer sealer, basecoat and clear coat
Answer:	It depends on whether your using water base or oil base. I use 200 micron because I spray Lacquer clear coat on my projects. I get perfect results every time.

Product description

POR-15 Gloss Black Top Coat aerosol is a direct-to-metal (DTM) paint designed to work incredibly well in all applications where there is a need to help preserve substrates susceptible to corrosion. Under exterior exposure POR-15 Top Coat has exceptional long-term sheen and color retention. POR-15 Top Coat can be applied directly to metal substrates or previously painted surfaces, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long-lasting protection. POR-15 Top Coat provides excellent adhesion and when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier to corrosion.

• Direct to Metal (DTM) Rust Preventive Paint
• No Need for Primer or Undercoat
• Use over POR-15 Rust Preventive
• UV resistant

User questions & answers

Question:	Would 1 can be enough for an F-150 driveshaft & rear axle
Answer:	I would think so. I did the bottom of a pickup truck bed which was about 4' by 6 1/2' (1 coat). It covered very nice
Question:	Is this product Moisture-cure li
Answer:	Moisture speeds cure but overnight is always required. The volatiles have to gas-out.
Question:	What kind of coverage can be expected from one can
Answer:	I would estimate 30 to 40 square feet per 14oz can
Question:	Is this a spay can application? How much space will it cover
Answer:	This is a spray application. For me it did around 8-12 square feet two times. It is recommended to do two coats.

Product features

POR-15 Top Coat DTM Paint

POR-15 Top Coat paint is a DTM ( direct-to-metal ) coating designed to work on prepped bare metal and work incredibly well in all applications where there is a need to help preserve substrates susceptible to corrosion. POR-15 Top Coat safety colors comply with OSHA required/recommended color codes for marking physical hazards and designating caution, to include protective equipment. Under exterior exposure POR-15 Top Coat has exceptional long-term sheen and color retention. POR-15 Top Coat can be applied directly to metal substrates or previously painted surfaces, with no need for a primer or undercoat, and is formulated to form a robust barrier that sheds moisture to provide long-lasting protection. POR-15 Top Coat provides excellent adhesion and when used over POR-15 Rust Preventive Coating, works to provide a permanent barrier to corrosion.

Product description

Economical protection plus paintability. Flexible, rubberized coating that creates an effective sound barrier and reduces vibration. Protects metal surfaces from corrosion and moisture. Features a textured finish that dries to a black, paintable finish.

• Flash point: -17 degrees_celsius

User questions & answers

Question:	how much heat can the coating handle? Like if i spray under my car.. and the exhaust is hot and I'm sitting at a stoplight
Answer:	Not really a heat resistant spray I did my truck and got over spray on exhaust and I could smell it burning off
Question:	Does it have a texture
Answer:	Bumpy, not smooth.
Question:	How well does this sound deaden
Answer:	It helps a little but it's more for protection on the under side of the car,for sound deaden I would use a sound deaden mat of some sort.
Question:	As far as looks for painting the underside of a lifted truck that shows from the side does it have a shiny black look ? Like a can of black spray pain
Answer:	No, it dries to a matte finish.

Product features

Automotive Undercoating

Dupli-Color Undercoating products are ideal for protecting wheel wells, gas tanks, frames and supports, weld joints, floor pans, doors, and quarter panels. Dupli-Color Undercoat (UC101) offers economical protection plus paintablity, moisture resistance, corrosion resistance, and a durable rubberized finish. Dupli-Color Professional Undercoat with Sound Eliminator (UC102) provides superior protection by also reducing road vibrations and road noise.

Product description

3M™ Professional Grade Rubberized Undercoating is an easy to use black protective coating that does not run when applied, provides anti corrosive protection, sound deadening and insulation to cars, trucks and recreational vehicles. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Use on cars, trucks, and recreational vehicles
• Coating helps prevent damage corrosion
• Helps reduce road noise
• Clean application

User questions & answers

Question:	Hi. if i spray this product under all 4 wheel wells, will it reduce the tire noise while i’m driving? thanks
Answer:	It will help some, the ticker undercoating is better for noise reduction

Product description

248657 Features: -Spray paint. -Black. -Protects metal surfaces from corrosion and moisture. -Rust preventive formula provides a barrier from rust on cars, trucks, trailers and other recreational vehicles. Product Type: -Rust Preventative. Size: -11 oz - 15 oz. Generic Dimensions: -0.96'' H x 0.17'' W x 1.4'' D, 1.45 lbs. Dimensions: Overall Height - Top to Bottom: -0.96 Inches. Overall Width - Side to Side: -0.17 Inches. Overall Depth - Front to Back: -1.4 Inches. Overall Product Weight: -1.45 Pounds.

• Spray paint
• Protects metal surfaces from corrosion and moisture
• Rust preventive formula provides a barrier from rust on cars, trucks, trailers and other recreational
• Rubberized
• Paintable

User questions & answers

Question:	What's the difference between this and the "professional" version, and is this good for suspension parts, or non-structural parts
Answer:	dont waste your money its junk an only get a 1/3 of it sprayed before it just runs out like water no matther how much you shake it
Question:	Will this adhere to wood? I want to spray the underside of my pop up camper. The pull out beds are wood platforms too
Answer:	Yes Spray undercoat is perfect for this. We do underneath Eva with this undercoat. It’s awesome. Use rubber gloves and crappy clothes to wear. Safety glasses and long sleeves. Spray at arms length. Let dry. Add another coat.
Question:	Can i use it for my avalanche to paint the faded plastic
Answer:	You could... but this dries with a texture , it doesn't dry flat like paint would , I would get some plastic paint for your bumper , or plasti dip the whole thing
Question:	Do i have to treat the rust first
Answer:	yes, You have to remove and treat the rust then apply this.