13 best ge motion sensor lights

Product description

Save energy and money with the ultra brite motion-activated LED light from GE. This motion-sensing night light automatically turns on when motion is sensed, up to 25 feet away, and turns off after 90 seconds of no activity. The light's motion-sensing and light-sensing technology means no wasted light, helping to keep your energy bills low by using just pennies worth of electricity per year. The energy-efficient GE ultra brite motion-activated LED light features 40-lumen, long-life LED bulbs that stay white and bright, while always being cool to the touch. This light is intended for indoor use and will only operate in low-light conditions. This product is UL listed and backed by a limited-lifetime warranty.

• Motion Activated – Night light automatically turns on when motion is sensed from up to 25 ft. away and turns off after 90 seconds of no activity
• Cost Saving – Long-life LED is cool to the touch, greatly reduces energy consumption and there’s no need to replace a bulb
• Compact Design – Night light plugs into any standard outlet and leaves the 2nd outlet free for use
• Home Decor – Stylish design and colors will compliment your existing home decor; great for any room in the house!
• Safe and Dependable – This reliable night light is UL Listed, designed in the USA for your peace of mind

User questions & answers

Question:	Does it make a clicking noise when it turns on
Answer:	I can't prove 180 because you would have to walk in the wall where it hangs but probably about 160 degrees when you slink along the edge of the wall, the light will go on.
Question:	Description says that it has motion sensing and light sensing technology. Does it stay on in the dark
Answer:	Hello johnofsocal, thank you for your question. These lights have a Dusk-to-Dawn Sensor – Light sensor automatically comes on at dusk with soft white light, and off at dawn.
Question:	our bathrooms have no windows and are dark, so does the light stay on all day or only when someone goes into the room
Answer:	We found the “beam spread” for this light to be broader than a regular nightlight - the light is not concentrated into a tiny area. We have one in the lower level family room (have blinds here), hallway that connects this room to another area of the basement, and at the bottom of the steps going into the lower level of our home. Previously all areas were very, very dark at night and to safely see you had to turn on a light. Our experience has been that these night lights allowed us to move into these spaces safely without turning on another light.
Question:	How wide does the sensor pick up? Does it cover a full 180 degrees to activate whenever someone is walking down a hallway
Answer:	Hello C. Harne, thank you for your question. Kelvin is a unit of measure for light temperature. This particular item won't have different temps but there are different temps available in under cabinet fixtures.

Product features

GE UltraBrite Motion-Activated LED Night Lights

With motion activated technology, these night lights are the perfect addition to your home lighting. No need to worry about turning the light off when leaving the room! When motion is detected from up to 25 feet away, the night light will turn on, emitting light at 40 lumens. After 90 seconds of no motion detected, the night light automatically turns off. It's a simple as that!

1-Pack

Choose a single pack in your favorite color: Bronze, White, Silver, or Brushed Nickel

2-Pack

Choose a 2-Pack in your favorite color: Bronze, White, Silver or Brushed Nickel

4-Pack

Choose a 4-Pack in either Bronze or Silver.

Great for any room in the house!

Product description

GE LED+ Motion bulb turns any fixture into a motion detector so your lights or outdoor security work automatically and hands-free From off to on you get the light you need One easy addition lots more control over your home.

• UPGRADE YOUR HOME WITH MOTION SENSOR LIGHT BULBS: Get next-level motion light bulbs for outdoor flood lights. The LED+ motion sensor light (outdoor) stays off when no motion is detected and switches on for 3 minutes once motion is detected.
• SECURITY LIGHTS, MOTION OUTDOOR DETECTION: The outdoor LED flood lights allow you to not worry about finding the light switch when your hands are full. The outdoor lights offer a long lasting shine and energy efficient light automatically.
• ENERGY SAVING MOTION LIGHTS: Outdoor motion sensor lights that reduce energy costs and bulb lifetime. The outdoor flood lights will last 15,000 hours with a 1.8 estimated energy cost per year.
• RELIABLE MOTION FLOOD LIGHT SYSTEM: Brighten up dark areas of your outdoor space. When triggered by motion, the motion sensor outdoor lights will illuminate walkways, garages and dark porches.
• EASY ADDITION, LASTING BENEFITS: The GE LED+ motion sensor light bulbs are the same size and shape as PAR38 Halogen Floodlight bulbs. They can easily replace existing outdoor LED flood lights while offering motion-detecting benefits that will last for several years.

User questions & answers

Question:	How many light bulbs do you get with this purchase? One review said two pieces. I’m not sure if that has changed. One light bulb to two light bulbs
Answer:	I don’t know for sure but, any other bulb would also be subject to the humidity
Question:	Will this turn on in daylight
Answer:	I can help you find out. Go to Amazon, search for led lights of standard size, find one that produces 75 watt equivalent, then look at the product description and it will tell you the led wattage. For example my 100 watt equivalent bulbs used a 14 watt leds.
Question:	How do I set the bulb to just go on with motion and not dusk to dawn
Answer:	CRI listed on the package is 80; they look very good to me
Question:	My porch light is 60w, 120v. can the 90w bulb be used and, if not, is there a 60w bulb available
Answer:	These aren’t rechargeable. They are LED light bulbs. Use them as you would any other light bulb. They last longer than incandescent, but when they are done, you will need to throw them away and use a new one.

Product features

Timer

Determines how long you would like your bulbs to stay on at full brightness after motion is detected (feature included in fixtures only)

Brightness

The amount of light that will illuminate from your fixture at all times when the motion sensor is not activated (feature included in fixtures only)

Sensitivity

Determines the approximate distance at which motion will be detected (feature included in fixtures only)

Dusk to Dawn

Sensor that detects ambient light to turn light on at night and off during the day (feature included in fixtures and PAR38)

Product description

Save energy and money with the UltraBrite Motion-Activated LED Light from GE. This motion-sensing night light automatically turns on when motion is sensed, up to 25 feet away, and turns off after 90 seconds of no activity. The motion-sensing and light-sensing technology means no wasted light, helping to keep your energy bills low by using just pennies worth of electricity per year. The energy-efficient GE UltraBrite Motion-Activated LED Light features 40-lumen, long-life LED bulbs that stay white and bright, while always being cool to the touch. Intended for indoor use and will only operate in low-light conditions. UL Listed. Limited lifetime warranty.

• Motion Activated – Night light automatically turns on when motion is sensed from up to 25 feet away and turns off after 90 seconds of no activity
• Cost Saving – Long-life LED is cool to the touch, greatly reduces energy consumption and there’s no need to replace a bulb
• Compact Design – Night light plugs into any standard outlet and leaves the 2nd outlet free for use
• Home Decor – Stylish design and colors will compliment your existing home decor; great for any room in the house
• Safe and Dependable – This reliable night light is UL Listed, designed in the USA for your peace of mind

User questions & answers

Question:	The light stays on and doesn't turn off , now how do I get a replacement
Answer:	It only comes on when there is motion. Mine is working correctly. It is off except when someone walks near it - day or night. Once it senses motion, it comes on. I love it as it comes on when I get up in the dark and goes off automatically in about a minute.
Question:	is there any 220v version of this product
Answer:	The metal light fixture itself serves as a junction box for internal wiring using Romex.
Question:	What does "40 lumens" mean? How much is that in ordinary Watts
Answer:	Pop off the plastic diffuser, then gently pry off the entire led panel. You will see very small tabs to slide a screwdriver into. Be gentle as to not distort the fixture.
Question:	MIne isn't turning on at night? Is anyone else having this problem? It turns on in a well lit room in the middle of the day
Answer:	Yes

Product features

GE UltraBrite Motion-Activated LED Night Lights

With motion activated technology, these night lights are the perfect addition to your home lighting. No need to worry about turning the light off when leaving the room! When motion is detected from up to 25 feet away, the night light will turn on, emitting light at 40 lumens. After 90 seconds of no motion detected, the night light automatically turns off. It's a simple as that!

1-Pack

Choose a single pack in your favorite color: Bronze, White, Silver, or Brushed Nickel

2-Pack

Choose a 2-Pack in your favorite color: Bronze, White, Silver or Brushed Nickel

4-Pack

Choose a 4-Pack in either Bronze or Silver.

Great for any room in the house!

Product description

Cover unsightly outlets while providing a soft glow with the GE Motion-Boost Coverlite LED Night Light. This LED night light is designed to fully cover two outlets when one is not in use, though it can be positioned to keep the second outlet free for use (light sensing may not function properly when used this way). It features light sensing technology which automatically turns the night light on at dusk and when motion is detected it automatically brightens to 40 lumens. The long-life LEDs mean there will be no bulbs to replace and it's energy efficient, using just pennies worth of electricity per year. The GE Motion-Boost Coverlite LED night light's stylish finish, modern design and always cool-to-the-touch bulbs make it perfect for any room in your home. Intended for indoor use only. This product is UL listed and comes with a limited-lifetime warranty.

• Motion Select – Save money and energy with Motion-Select technology. Use the switch, located on the backside of the night light, to choose between Motion-Boost or Motion-Activated
• Motion-Activated – Detected motion activates the 40-lumen night light up to 25 feet away in low light conditions and the light turns off automatically after 90 seconds of no motion
• Motion-Boost – Night light automatically turns on at dusk at a low 3 lumens, boosts to 40 lumens when motion is detected from up to 25ft. away, and automatically dims back to 3 lumens after 90 seconds of no motion
• Dusk-to-Dawn Sensor – The LED night light automatically turns ON at 3 lumens at dusk and turns OFF at dawn (This only occurs while in the Motion-Boost setting)
• Safe and Dependable – This reliable night light is UL Listed, designed in the USA for your peace of mind
• Material Type: Plastic

User questions & answers

Question:	When in motion sensor mode only (eg. dark until you trigger the motion), how much energy does it draw
Answer:	We ordered two.
Question:	Hi! Do these come in cool white light at all please
Answer:	Any binder clip, chip clip, clothespin will work... But I do see some on Amazon for 11.39 for 24 pack...
Question:	When in motion sensor mode, during the day or artificial light, if I walk by does it turn on when is not necessary
Answer:	1
Question:	are any parts replaceable if it stops working? Thanks
Answer:	I think you need the inside, inner edge of the window frame to attach the top (sticky part) of the blind (flat) to.... You could try attaching to the wall but I’m not sure how the blind would stick and how it would go up and down.

Product features

Motion-Activated Mode

In Motion-Activated Mode, the high-level night light turns on whenever motion is detected in low-light conditions. The light turns off after 90 seconds without motion.

Motion-Boost Mode

In Motion-Boost Mode, the light turns on at dusk (or low light conditions) and off at dawn. Additionally, the light boosts to a higher level of brightness when motion is detected. The light dims after 90 seconds without motion.

Product description

The C by GE Smart Switch-Motion Sensing and Dimmer adds smart bulb functionality to traditional bulbs and keeps smart bulbs smart. The smart Wi-Fi switch works as dimmer switch and enhances traditional bulb functionality with motion sensing, out-of-home control, scheduling and scene setting. With motion sensing and ambient light detection, set lights to turn on or off based on natural light and motion in the room. When C by GE Smart Bulbs are installed, the smart switch allows app or voice control even when power is turned off at the switch. Pair the Smart Switch with C by GE Smart Bulbs in other fixtures like table lamps and control your all your lights in the room from one wall switch. C by GE Smart Switch wirelessly connects with other C by GE Smart Switches so you can control the same light fixture from multiple switches without a travel wire, even if the switches are on different circuits. Simple DIY set up. The Smart Switch connects directly with Google Home and Alexa devices without a hub required. Neutral wire--usually a white or gray wire--is required. Power Capacity: Max 450W, Wi-Fi: 802.11 b/g/n, AC: 60Hz, Grade: Residential

• A SMART DIMMER SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE smart switch dimmer allows you to control your lights through touch, C by GE mobile app, or voice assistant. With Google Home or Alexa, dimmer switches from C by GE make light control easy.
• SAVE MONEY AND ENERGY WITH THE C BY GE MOTION SENSOR LIGHT SWITCH: Motion and ambient light detection turn light bulbs on or off based on the amount of natural light or motion in the room providing hands-free control and energy savings.
• BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/GOOGLE HOME: C by GE smart bulbs and the smart switch dimmer work with voice and app control at all times, even when the wall switch is turned off.
• MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE smart dimmer allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices.
• A SMART DIMMER SWITCH FOR LED LIGHTS AND MORE: Set scenes to match your mood by controlling the dimmer switch with mobile app, touch, or voice assistant to control brightness level. Works with LED, incandescent, halogen, and CFL bulbs.
• WIRELESS CONTROL OF 3-WAY SMART SWITCHES: Add any two C by GE Smart Switches and group them in the C by GE iOS/Android app for 3-way control of any large space.

User questions & answers

Question:	Does it support any dimmable leds? i have bbounder leds from amazon which work fine with wemo but not dimming with this one
Answer:	Thanks for reaching out! We have a list of known compatible bulbs that have been tested with these switches you can find that information at https://www.gelighting.com/compatibility. We also sell our own dimmable LED bulbs that work with these switches, you will just have to set the bulb type in the switch settings. Please reach out to our support team if you need further assistance. -C by GE Support
Question:	Can one of these be use as a 2-switch system. I have one switch that act as 2 switch for thr living room and another one for the kitchen
Answer:	If your intent is to use these switches as a 3-way (2 switches controlling 1 set of lights) then yes, our switches can do that. However, both switches will need to be C by GE switches. Please contact our support staff for more information regarding the switches, thank you!
Question:	Can this switch connect to and control C by GE smart plugs? and/or third party smart plugs
Answer:	It will work with the C by GE Smart Plug by adding them to the same room within the C by GE app. It will not work with 3rd party products.
Question:	I have ge smart lights, if i buy this and turn the switch off will the light bulb still work properly
Answer:	This took me a while to figure out but as long as all the bulbs being powered of this switch are C by GE light bulbs and you tell the switch that through the C by GE app on your phone, then yes, they will remain always connected. However, if just one bulb off the switch isn't a C by GE smart bulb this setting won't work right.

Product features

Works With Any Bulb

Turns ordinary incandescent, halogen, and LED bulbs into smart bulbs and keeps C by GE smart bulbs connected even when the switch is turned off.

Set Schedules

Schedule lights to turn on and off automatically

Control Away From Home

Turn lights on or off from your phone when you’re not home.

Group Together

Group multiple switches and bulbs together and control all your lights from one switch.

Motion Detection

Automatically turn lights on and off based on natural light and motion in the room. App setting disables motion sensing during hours you won’t want to be disturbed.

Smooth Dimming

Dim traditional or dimmable LED light bulbs to create the perfect mood.

No Hub Required for Out of Home and Voice Control

Connect directly to Google Home and Amazon Alexa devices without a standalone bridge or hub.

Simple Do-It-Yourself Set Up

Takes about 30 minutes and a screwdriver to install the switch. Pliers and a voltage tester optional.

Compatible with Single Pole and 3-Way Switch Applications

Fits in existing electrical boxes. Neutral wire required. Works with 3way applications by replacing both switches with C by GE Smart Switches

One Touch Wireless Whole Room Control

Install C by GE Smart Bulbs in other fixtures and set them up in the C by GE app to wirelessly control all your lights from one smart switch.

Group Switches Without Travel Wires

Connect multiple switches without a travel wire. Control lights that aren’t wired on the same circuit, like controlling a kitchen light from your hallway.

Requires Neutral Wire & Wifi

Check your wiring to make sure you have a neutral wire—often a gray or white wire inside the electrical box—and WiFi connectivity before starting installation. 2.4 GHZ WiFi required.

Product description

Put home automation into motion with the GE-branded Unfrighten Z-Wave In-Wall Smart Motion Switch. When paired with a compatible hub, the hardwired motion-detecting smart switch operates ceiling lights, wall fixtures and more through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, Home Seer, Vera, Nexia and more.

• VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more.
• SELECTABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub.
• 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.Voltage:120 volt
• FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit.
• Please refer user guide below for better use

User questions & answers

Question:	Works with smartthings app on samsung note
Answer:	Yes, all of the GE/Enbrighten Z-Wave lighting controls will work with SmartThings on any smart device that supports the SmartThings app.
Question:	Can this device function as a normal, manual switch, but then use the motion feature to trigger other events/automations
Answer:	Yes, however to clarify this and another answer already posted, you must have a hub that supports this functionality. The GE 26931 is utilizing the Z-Wave Multi-Channel Command class to be able to address both the motion and the switch function seperately. At this time, only the Lowes Iris and SmartThings (using a community created device handler) can achieve this. It is necessary for the hubs to allow this command class and functionality before it can be taken advantage of. If you are using the Lowes Iris system, you would need to manually use button presses to put the GE 26931 into Manual mode, and then you can set rules to perform actions when motion is detected. For SmartThings, it would be necessary to locate a community device handler to properly take advantage of setting the functions of the GE 26931. We continue to work with other hub manufacturers, however at this time, those are the only devices we are aware of that can utilize the features we have created to perform as you have requested.
Question:	Is this switch smart enough to not turn on the lights when it is daylight? (i.e. does it have an ambient light sensor
Answer:	Yes, it can judge if it is daytime and respond by not automatically turning on the light. You just have to set it up that way. There are several options available. You just need to hold one of three certain buttons down on the switch to program it the way you want it. You can NOT connect the sensor independently to the HUB though, only the actual switch.
Question:	I want to use motion switches in a 3-way setup on a staircase. Can this switch be paired with another motion sensor
Answer:	Unfortunately at this time we do not have an Add-On Switch with a built in motion sensor, and you cannot use 2 Smart Motion Switches together.

Product features

GE Z-Wave Plus In-Wall Smart Motion Switch

Wirelessly schedule a timed event, create custom scenes and control on/off function from anywhere from your smartphones, tablets, PCs and Z-Wave enabled remotes.

Ultimate Flexibility

Wirelessly schedule a timed event, create custom scenes and control on/off function from anywhere from your smartphones, tablets, PCs and Z-Wave enabled remotes.

3 Operational Modes

Occupancy mode turns on when motion is detected and off automatically. Vacancy mode requires the light to be manually turned on and will turn off automatically when motion is not detected. Manual mode for manual On and Off control of the lights.

Detection Zone

Sensor covers a 180 degree range up to 45 ft. away in order to be effective in small or large rooms.

Requires Neutral Wire

Replaces your current light switch and is easy to install using your home's existing wiring. 'Please ensure your home has a neutral wire before purchasing.

Product description

Light up the night with the GE ultrabrite motion-boost LED light. This motion-sensing night light turns on automatically at dusk and off at dawn. Light automatically brightens from 3 lumens to 100 lumens when motion is detected and dims to 3 lumens after 90 seconds without motion. The GE ultrabrite motion-boost LED night light features long-life LEDs that stay white and bright, while always being cool to the touch. This light is intended for indoor use and Will only operate in low-light conditions. This product is UL listed and backed by a limited-lifetime warranty.

• Dusk-to-dawn sensor – The light sensor automatically turns the night light on at dusk and off at dawn
• Safe LED – a cool-to-the-touch, long-life LED provides lasting Light with no bulbs to replace and is safe for use as a kids night light
• GE motion boost – the motion-activated night light boosts to 100 lumens when motion is detected and returns to 3 lumens after 90 seconds of inactivity
• One outlet night light – This LED motion-sensing night light has a space-saving design that only uses one outlet, leaving the second outlet free for other electronics
• Peace of mind – night light is UL listed for safety and comes with a limited-lifetime warranty

User questions & answers

Question:	I want my cat to trigger this. It would be plugged in above a litter box. Can a cat trigger it
Answer:	Yes the cat would trigger light. It is very sensitive to the slightest motion. Also its "resting light" is bright enough to light area, while the "activated" light" is extremely bright. Great light, would highly recommend !
Question:	Distance for motion detection? Feet
Answer:	Hello Diane, thank you for the question. This device can sense motion from 25 feet away.
Question:	What's the distance for motion detected from the sides
Answer:	Thank you for your question. This night light can sense motion from up to 25ft in perfect conditions.

Product description

Smart Switch Motion Sensing Dimmer (Button with light ring) - 3 Wire No Neutral

• A SMART DIMMER SWITCH FOR EVERYBODY IN THE HOUSE: The C by GE smart switch dimmer allows you to control your lights through touch, C by GE mobile app, or voice assistant. With Google Home or Alexa, dimmer switches from C by GE make light control easy.
• SAVE MONEY AND ENERGY WITH THE C BY GE MOTION SENSOR LIGHT SWITCH: Motion and ambient light detection turn light bulbs on or off based on the amount of natural light or motion in the room providing hands-free control and energy savings.
• BUILD YOUR SMART HOME WITH SMART BULBS THAT WORK WITH ALEXA/GOOGLE HOME: C by GE smart bulbs and the smart switch dimmer work with voice and app control at all times, even when the wall switch is turned off.
• MAKE TRADITIONAL LIGHT BULBS SMART BULBS: The C by GE smart dimmer allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices.
• EASY TO USE IN ANY HOME: This smart dimmer switch works with most common residential wiring, and no neutral wire is required. DIY installation takes about 30 minutes for this smart switch dimmer for incandescent, halogen, and LED lights.
• WIRELESS CONTROL OF 3-WAY SMART SWITCHES: Add any two C by GE Smart Switches and group them in the C by GE iOS/Android app for 3-way control of any large space.

User questions & answers

Question:	If this is switched to the off position, will my automations still work? Or will that disconnect it like a regular household switch does
Answer:	Running
Question:	Does the Paddle rest in the middle. So press up on the paddle to turn on and press down to turn off
Answer:	If you live in California there should be a ground rod into the earth. White and green are attached to the grounding bar on the electrical panel add a double 30amp breaker to your panel. Use an external plug wired directly to your panel.
Question:	Will a pet set the motion detection sensor
Answer:	The cord is received is as pictured L14-30 with 4 prongs at one end and 4 slot socket at other end. It fits perfectly in my 220V generator and receptacle inlet next to my electric meter.
Question:	I have a ceiling fan, can this work with that as well? It has bulbs too
Answer:	Dear Joanne,The diameter of the cord is 16.5mm.

Product features

Make Traditional Bulbs Smart

Turns ordinary incandescent, halogen, and LED bulbs into smart bulbs and keeps smart control even when the switch is off.

Set Schedules

Schedule lights to turn on and off automatically.

Control Away From Home

Turn lights on or off from your phone when you’re not home.

Group Together

Group multiple switches and bulbs together and control all your lights from one switch.

Motion Detection

Automatically turn lights on and off based on natural light and motion in the room. App setting disables motion sensing during hours you won’t want to be disturbed.

Smooth Dimming

Dim traditional or dimmable LED light bulbs to create the perfect mood.

No Hub Required for Out of Home and Voice Control

Connect directly to Google Home/Nest Hub and Amazon Alexa devices without a standalone bridge or hub.

Simple Do-It-Yourself Set Up

Easy to install with a few tools and about 30 minutes.

One Touch Wireless Whole Room Control

Install C by GE Smart Bulbs in other fixtures and set them up in the C by GE app to wirelessly control all your lights from one smart switch.

Works with Most Residential Wiring

Works in most homes, including older houses, with no neutral wire required.

Group Switches Without Travel Wires

Connect multiple switches without a travel wire. Control lights that aren’t wired on the same circuit, like controlling a kitchen light from your hallway.

Compatible with Single Pole and 3-Way Switch Applications

Fits in existing electrical boxes. Works with 3-way applications by replacing both switches with C by GE Smart Switches.

Product description

"GE Wireless Motion-Sensing Light Control Transmitter with 1 Grounded Outlet ReceiverAutomatically turn lights ON when motion is detected and OFF after 10 minutes of no motion. Ideal for plug-in lamps and lighting in hallways, laundry rooms, entrance ways, and more. Receiver has 1 grounded outlet and plugs into any standard household outlet up to 100ft. range from motion sensor. Motion Sensor has 30ft motion detection range3 AAA Batteries (Included)Electrical Ratings 12A, 120VAC, 60HZ, 360W Max Tungsten, 1440W Max Resistive, UL Listed"

• Automatically turn lights ON when motion is detected and OFF after 10 minutes of no motion.
• Ideal for plug-in lamps and lighting in hallways, laundry rooms, entrance ways, and more.
• Receiver has 1 grounded outlet and plugs into any standard household outlet – up to 100ft. range from motion sensor.
• Motion Sensor has 30ft motion detection range and is battery powered – 3 AAA Batteries (Included)
• Electrical Ratings – 12A, 120VAC, 60HZ, 360W Max Tungsten, 1440W Max Resistive, UL Listed

User questions & answers

Question:	What's the shortest time you can set for the light to be on
Answer:	Not yet
Question:	Where can I buy motion sensors that work with this receiver
Answer:	Sounds like it's broken.
Question:	Can the receiver be plugged into an extension cord that will allow the receiver to face the motion sensor more directly
Answer:	each set has a unique code. check the code identification on each box. if the codes are different you are good to go. if any are the same those will talk to eachother.
Question:	Anyone find one that has an adjustable timer? (Working just like this one
Answer:	No, it doesn't need to be pointed. It just needs to be in proximity of the receiver. I use this item with the receiving outside to control patio lights, and the remote inside on the window sill.

Product features

1 Grounded Outlet

The receiver has 1 side-access grounded outlet and plugs into any standard household outlet for tool-free installation.

30ft. Detection Range

The 30ft. motion-detection range covers large rooms, offering convenience and peace of mind.

100ft. Signal Range

The 100ft. signal range easily connects to the receiver and makes lighting control ideal for multiple areas in your home.

Battery Operated Sensor

Three AAA batteries are included to power the sensor anywhere to provide wireless lighting control.

Motion-Sensing Control Versatility and Uses

With touchless lighting, you can automatically turn on your lights with movement. Automate your lighting at home with hands-free operation, conserving electricity and energy.

Compatible with LED, CFL and incandescent lights, this wireless lighting control supports a wide range of lighting.

This motion sensor is perfect for plug-in lamps, indoor seasonal lighting and lighting in hallways, laundry rooms, entryway and more, rated for 120VAC/12A, and UL Listed.

Sensor Mounts Anywhere

To mount the wireless motion sensing transmitter, screws are provided to install mounting device where desired.

The keyhole slots are from center to center. The distance is 1 and 7/16th of an inch center to center.

To achieve the maximum coverage, mount 6 to 8 feet.

General Application

The motion sensor is more sensitive to motion across the front of the sensor than motion towards the sensor. The detector senses heat in motion and other possible heat sources.

To avoid false triggering, avoid placing sensor where it will be aimed at air conditioners, heaters, laundry equipment and other sources of heat or cold.

Product description

Save energy and money with the GE automatic LED night light. This convenient plug-in night light complements any decor with its neutral color and its soft glow, and there are never any bulbs to replace. Equipped with light-sensing technology, the energy-efficient light turns on automatically at dusk and off at dawn while staying cool to the touch. The GE automatic LED night light provides a cool white light, which stays white and bright, and it uses just pennies worth of electricity per year! This light is great for hallways, laundry rooms, kitchens and more. This product is intended for indoor use only and is backed by a 90-day limited .

• Light When You Need It – With light-sensing technology, this night light automatically turns ON at dusk and OFF at dawn
• Extended Life – Long-lasting, energy efficient LED means no bulbs to replace and the light source feels cool to the touch, even after extensive use
• Compact Night Light – The modern night light design plugs into any standard unused indoor outlet while leaving the 2nd outlet free for use
• Home Decor – Compliment your home with this night light’s stylish, glossy white finish
• Safe and Dependable – This reliable night light is UL listed, designed in the USA for your peace of mind

User questions & answers

Question:	Why does it say ge in the title description, but then in the product information section it lists the manufacturer as jasco? authentic ge products
Answer:	Hello Ellis Isaacs, thank you for your question. Yes, the products are authentic. We are the manufacturer of GE night lights.
Question:	will these work if the power goes out
Answer:	Hello Laura J. Schultz, thank you for your question. No, you would need to look at our power failure night lights. For example item 46473 is one of our best sellers.
Question:	How many watts does it use? Just curious
Answer:	Hello John Larson, thank you for your question. These nightlights use .5 watts
Question:	does it work with 220 v
Answer:	Hello Pedro, thank you for your question. No, these were not designed to work with 220v.

Product features

GE Automatic LED Night Lights

Light When You Need It

Dusk to dawn technology automatically turns the night light off when the room is lit, and on when the room is dark.

Leaves 2nd Outlet Free

Compact size leaves the 2nd outlet free for use, or plug it in to the bottom receptacle to cover unsightly outlets.

Safe and Dependable

Great for bedroom, bathroom, nursery, hallway, kitchen and more!

Product description

Go confidently through the night with a GE-branded LED Motion-Boost Night Light. Featuring bright, energy-efficient LEDs, the plug-in night light is perfect for bedrooms, staircases, bathrooms and more. Whenever motion is detected within a range of up to 25 feet, the night light automatically brightens from 3 lumens to 60 lumens, creating enough illumination to safely move about a dim room or hallway. After 90 seconds without sensing motion, the night light will return to 3 lumens. The light boosts up to 60 lumens and is perfect for nighttime mobility while the low light level of 3 lumens won’t disrupt sleep. There’s no need to unplug the motion-boost light during the day – the night light includes unique LED light‑sensing technology, which helps keep energy costs down by automatically turning on at dusk and off at dawn. Transition your household from day to night with the GE-branded LED Motion-Boost Night Light.

• Motion-Boost – Night light automatically turns on at dusk at a low 3 lumens, boosts to 60 lumens when motion is detected from up to 25ft. away, and automatically dims back to 3 lumens after 90 seconds of no motion
• Dusk-to-Dawn Sensor – The LED night light automatically turns ON at 3 lumens at dusk and turns OFF at dawn
• Cover Lite – Unique design covers unsightly outlets and is a great addition to your existing decor
• Long-life LED – LED light is energy efficient and there’s no need to replace a bulb
• Safe and Dependable – This reliable night light is UL Listed and designed in the USA for your peace of mind

User questions & answers

Question:	Can I use this light with 220 V
Answer:	When the shade is fully raised, the drop length is approximately 7" to 8" long.
Question:	Your description lists the wattage as 60 watts. Is this accurate
Answer:	Sorry, we only have the sizes you see listed. You can break that up and order two smaller shades to fit side by side in your window recess.

Product description

Sleep soundly with the LED GE Sleep Lite with Motion-Select Technology. The soft, warm LEDs distribute a tranquil candlelight glow without the blue wavelengths that disturb your body’s natural sleep cycle. The blue light emitted by our electronic screens – including tablets, phones, computers and televisions – can suppress the body’s production of melatonin (or the “sleep hormone”), meaning exposure to excessive LED blue light at night can disrupt our natural internal clocks. The amber hue of the Sleep Lite yields virtually no blue light, supporting healthy melatonin levels that tell our bodies it’s time for rest. The Sleep Lite features two illumination modes: In Motion-Boost Mode, the light turns on at dusk (or low light conditions) and off at dawn; additionally, the light boosts to a higher level of brightness when motion is detected. The light dims after 90 seconds without motion. In Motion-Activated Mode, the high-level night light turns on whenever motion is detected in low-light conditions. The light turns off after 90 seconds without motion. To select your preferred mode, use the switch located on the back of the night light. By promoting a natural sleep cycle, the LED GE Sleep Lite works to improve your overall sleep quality.

• Motion-Select Technology – Use the switch on the back of the night light to choose between MOTION-ACTIVATED or MOTION BOOST operation
• MOTION-BOOST – Light turns on (low level) at dusk and turns off at dawn. Light boosts to high level when motion is detected up to 25ft. away. Light dims after 90 seconds without motion.
• MOTION-ACTIVATED – Detected motion activates the high-level night light up to 25ft. away in low-light conditions. Light turns off after 90 seconds without motion
• Natural Sleep Aid – Warmer amber light provides illumination with virtually no blue light emission that naturally supports healthy melatonin levels without harming your sleep cycle
• Safe and Dependable – This reliable night light is UL Listed, designed in the USA for your peace of mind

User questions & answers

Question:	How many lumens
Answer:	You use the bar at the bottom and just pull them down. When you want to lift you sort of pull them in an upward motion and the pulley system catches and hoists it up. 1 of my 3 is uneven and I’m still trying to figure out how to adjust or fix it.
Question:	Is it always on? I am looking for total dark until motion
Answer:	Our materials are imported from overseas. These are finished and shipped from our facility here in the United States in Georgia.
Question:	What is the motion sensor detection angle
Answer:	No, these are not top down.

Product description

Add some light where you need it most with a GE LED motion-sensing LED light bar. Automatically activated by motion up to three feet away, the light bar is ideal for designer kitchen, home offices and studios. The 12-inch motion-sensing fixture features three light levels of evenly distributed light, allowing you to select a task level or accent light level and is linkable with up to 20 fixtures while still using only one outlet. The long-life LED provides a cool, bright white light for your home's needs and stays cool to the touch for added safety in any room. The 12-inch GE LED motion-sensing light bar comes fully assembled, ready to install and includes all installation hardware. This product is UL listed and is backed by a limited-lifetime .

• 12in. LED Light Bar – Add light where you need it with this 12” LED under cabinet light bar. Ideal for kitchen, home office, office lighting, studio lighting and more
• Automatic Lighting – The under-cabinet motion-activated LED will automatically turn on with motion up to 3 feet away
• Dimmable Light Fixture – High/Off/Low lighting modes allows you to have bright task lighting or dim accent lighting for ultimate flexibility for any situation
• Bright LED – A 450 lumen, high-powered and energy-efficient LED lights up dark spaces to bring light to your home or office and is UL listed for safety and Energy Star rated
• Easy Install – All mounting hardware is included for quick, easy under cabinet mount lighting and is linkable with up to 20 fixtures off of one plug for a great, efficient under cabinet lighting setup

User questions & answers

Question:	when linked, will one panel control all linked panels
Answer:	no
Question:	can i connect a GE 38940 to it and will the motion sensor turn off the downstream light
Answer:	If you push the shade all the way up and then pull down using both hands in an even motion, it should level out the shade.
Question:	Do these lights also turn off after a certain period of time if no further motion is detected
Answer:	Thank you for your interest in our beautiful Tuscan cordless bamboo shades. We do not have an exact date as to when this product will be back available. We anticipate updating inventory at the end of September. Please continue to check back for updates.
Question:	Can I control these lights without having to use the motion to turn them on and off? Can I just control them with a switch
Answer:	You'd have to address that question to the seller.