13 best 12 3 wire home depot

The term "12 3 wire" typically refers to a specific type of electrical wire used for various wiring applications in residential and commercial settings. Here's what you need to know about 12-3 wire, and you can find this product at Home Depot or similar hardware stores:

  1. Wire Gauge: The "12" in 12-3 wire signifies the wire gauge, which is an important factor in determining the wire's current-carrying capacity. In this case, it refers to 12-gauge wire. This gauge is commonly used for general household electrical applications.

  2. Number of Conductors: The "3" in 12-3 wire indicates that there are three insulated conductors within the cable. These conductors are typically color-coded: black, red, and white. There may also be a bare or green conductor for grounding.

  3. Applications: 12-3 wire is often used for wiring circuits that require both hot and neutral conductors, along with a ground wire. It's commonly used in residential electrical wiring for applications like 240-volt circuits, 20-amp circuits, and for connecting three-way and four-way switches in lighting systems.

  4. Three-Way and Four-Way Switches: One common application for 12-3 wire is in three-way and four-way switch setups for lighting. These setups allow you to control a single light or group of lights from multiple switch locations. The additional conductor (usually red) is used to create the necessary connections.

  5. Color Coding: In most cases, the color-coding of 12-3 wire follows a standard convention: black and red are hot conductors, white is the neutral conductor, and green or bare is the grounding conductor. However, you should always check the markings on the wire and follow local electrical codes for proper installation.

  6. Voltage Rating: 12-3 wire is typically rated for 600 volts, making it suitable for a wide range of residential and some commercial electrical applications.

  7. Buying at Home Depot: Home Depot and similar home improvement stores offer a variety of electrical wires, including 12-3 wire. You can purchase it by the foot or in spools, depending on your project's requirements.

  8. Installation: When working with electrical wiring, it's crucial to follow local electrical codes and safety guidelines. If you are not experienced with electrical work, it's advisable to consult a licensed electrician to ensure safe and compliant installation.

  9. Circuit Breaker Selection: When using 12-3 wire, it's important to pair it with the appropriate circuit breaker to protect the circuit from overloading. A 20-amp circuit breaker is often used for 12-gauge wire in residential applications.

In summary, 12-3 wire is a type of electrical cable commonly used in residential wiring for specific applications that require multiple conductors.It's important to use it in compliance with local electrical codes and guidelines to ensure safety and proper functionality in your electrical circuits. You can find 12-3 wire at home improvement stores like Home Depot for your wiring projects.

Below you can find our editor's choice of the best 12 3 wire home depot on the market
  

Southwire 63947622 50' 12/3 with ground Romex brand SIMpull residential indoor electrial wire type NM-B, Yellow

Southwire

Based on 308 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 12 gauge, 3 conductors with ground, 50' per coil
  • Made in America

User questions & answers

Question: Can this wire be used outside to connect a sub-panel to the main panel if enclosed within a waterproof conduit
Answer: Yes Come as a pair. Good quality racks. Very versatile and easy to mount & dismount..
Question: Is it made in the usa or china, the information contradicts its self
Answer: About 30"
Question: Can this be run inside the emt conduit
Answer: Yes. I mounted it to a Dodge 2005 Ram and it included everything needed.
Question: How many amps can this carry
Answer: I bought it and installed on aluminium cap and worked fine

Southwire 13055926 12/2WG UF Wire 100-Foot, Approved for Direct Burial Wiring

Southwire

Based on 954 reviews Check latest price

Product description

Permitted for use in direct Burial applications such as exposed or concealed wiring in damp, moist, wet, dry and corrosive locations as specified by the NEC. Southwire underground Feeder cable can be used in applications such as general branch wiring, new wiring, and replacement wiring. Southwire type UF is a thermoplastic Non-Metallic sheathed cable. Solid copper conductor. Type TW conductor insulation color coded with thermoplastic overall jacket. Uf thermoplastic insulated 60˚ c wet or dry locations. Ufb thermoplastic insulated with conductors rated at 90˚ c.

From the Manufacturer

For applications of direct burial, dwellings not exceeding 3 floors above grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry, and corrosive locations, general branch circuit wiring and new wiring or replacement wiring. Flame retardant, moisture, fungus, and corrosion resistant. Sunlight resistant jacket. JC-30B Federal specification, ASTM B-3, ASTM B-8 and NY state DOS 16120-880923-2002. U.L. Listed. /2 = 2 insulated wires with bare ground. /3 = 3 insulated wires with bare ground.

  • Coated in a sunlight resistant jacket that is flame retardant, moisture, fungus, and corrosion resistant
  • Primarily used in direct burial applications, such as underground feeder to outdoor Lighting in apparatus, exposed or Concealed wiring in Damp, moist, wet, dry, and Corrosive locations
  • UL listed
  • 12 gauge, 2 conductors with ground, 100' per coil
  • Made in America

User questions & answers

Question: The description says "without ground" and the photo of the package says "with ground". Which is it
Answer: Fit perfect on our Ford Ranger
Question: Will this product support 20 amps through its entire 100' run
Answer: This would fit on the topper of a full size truck.
Question: Would this work to run a 50 amp circuit to my outbuilding
Answer: You will need help to install. 2 people can do it in a couple of hours.
Question: Wil this work for wiring up a series of shop lights all with on 40' of each other
Answer: No . ram box will be in the way of mounting rail

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 28828222 50' 12/2 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Yellow

Southwire

Based on 2 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 12 gauge, 2 conductors with ground, 50' per coil
  • Made in America

User questions & answers

Question: would this work to run a plug for a 8ooo btu air cond
Answer: I would use outdoor wire for that even though it's enclosed in conduit. Check your codes in your area
Question: Will this wire pull through a 1/2 inch PVC conduit
Answer: S Jersey,
Question: Im running a 30a hook up for my camper this will work right
Answer: Theoretically, I guess you could. My question would be, why? This kind of wire doesn't need conduit - this version is for "out of ground" areas, there is a direct burial version too. So back to your question, yes you can (NEC doesn't specifically say you can't) but you can save a bunch of $$ by either running it without conduit or by purchasing THHN wire if you must run conduit. Hope this helps!
Question: Can I use this wire with a 40amp 240v breaker for a 240v 2000w wallheater
Answer: Did some research and found gauge #12 is for 20 amps, gauge # 10 is for 30 amps, gauge #8 is for 40 amps. Hope that helps.

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 63946822 50' 14/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, White

Southwire

Based on 322 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 14 gauge, 3 conductors with ground, 50' per coil
  • Made in America

User questions & answers

Question: Which is the heaver guage wire 12/3 or
Answer: Whne it says WG in the 12-2WG it most deffinately has three total wires, one being the bare copper ground.
Question: Can a 14/3 guage romex be used in a motion sensor to control 4 100 watt CFL bulbs
Answer: Yes
Question: Is this a 4 conductor cable
Answer: I wouldn't run 50 amp 30 amp should be ok it depends on what equipment you are using.
Question: I knew the purpose of the black/white/copper wires. Would you please share the purpose of the red wire? Thanks
Answer: Yes this should work ok!

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 63947621 25' 12/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Yellow

Southwire

Based on 163 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 12 gauge, 3 conductors with ground, 25' per coil
  • Made in America

User questions & answers

Question: Does it work for 240V breakers
Answer: If its 110 volt yes, if it is 220 volt you will need 12/3. As long as it doesn't draw more than 20 amps, I would think an 8000 but air conditioner word be 110 volt and draw less than 20 amps.
Question: Would running this wire to an 50 amp RV receptacle do the trick? Aka work to power a tiny house
Answer: You probably can, but if you have to make a lot of turns it might get tight. I just did a run with 3/4 with no problems.
Question: Can this be used in exterior locations
Answer: 12 gauge is 20 amp cable. If you are desiring a 30 amp circuit you require 10 gauge as a minimum. There are a lot of great books for a low price on wiring available that cover these matters in detail for the average person with no electrical training. You might look around for the Black and Decker text used for cheap. Just remember that for a camper you will be looking at the rough weather and exterior methods and material as well.
Question: solid or stranded
Answer: Yes, it is possible to carry a 2000w 240V load on a 12/2 NM-B cable like this one. No, it will not pass an electrical inspection. The breaker must protect the wire, and if someone comes along and adds load to your heater circuit they could easily overheat the 12/2 and the 40A breaker would just let it fry as long as it never pulls 40 amps. Neither #12 nor #10 is good for 40 amps - both would overhead on a 35A load. You can drop down the breaker to a 240V 20A circuit breaker and both the cable and the load would be protected. It still would not pass inspection because of the improper color coding of this 12/2 cable. If the next owner of your home calls an electrician to rewire the house, he will think that your wall heater is 120V because standard household color coding is : black = +120 volts (Bus A) white = 0 volts (neutral wire) red =-120V bare = equipment ground (no current flow in during normal operation) That is why people are advising you to use 12/3 or 14/3 cable - 3-conductor Romex-type cables have a red jacketed wire in the bundle which is the proper color to use alongside the black cable for the two "hot" wires in a 240-volt circuit. This NM-B cable has an insulation rating of 600V, so it can tolerate 240V operation. I have used 12/2 to feed a 240V circuit - I fed the cable from a 240V 20A circuit breaker and used a red felt-tip permanent marker to color the white wire. This still would not pass an electrical inspection but it addresses the safety issues associated with serving your heater with 12/2 cable as long as the wire remains dry. I don't know the National Electrical Code well enough to say whether or not a black electrical tape on the white wire would pass an electrical inspection - that is also a obvious signal that the white wire is not a neutral wire. The calculations of 8.3 amperes drawn by your 2000-watt heater are correct. Using a 15A 240V breaker instead of 20A would introduce no further safety issues. Please do not use 12/2 to serve this load unless you mark the circuit as 240V in a can't-miss-it fashion, or the next person who tries to work on your wiring may assume that the white wire had 0 volts on it when it actually has 240 volts relative to the black wire - you may forget about it yourself and hurt yourself or your property sometime in the future. Misidentified wire is a cruel wiring mistake to leave behind. Happy wiring!

Southwire 28827422 50' 14/2 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, White

Southwire

Based on 1 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (non-metallic sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 14 gauge, 2 conductor with ground, 50' per coil
  • Made in America

User questions & answers

Question: Is this copper wire
Answer: 12/3 is the larger
Question: is this safe for basement recess lighting? i have no flooding issues
Answer: Yes
Question: can i use this to wire plugs and light switches
Answer: Yes. 3 insulated wires (Red, Black, White) plus ground wire
Question: what is the diameter of this wire, I'm looking to cover this with a raceway to hid the wires running along the ceiling
Answer: This wire is typically used for single-phase 120/240 volt wiring for powering appliances requiring 240 volts AC like electric cloths driers, central air conditioners, etc. For standard single-phase wiring, the voltage between the neutral white wire and the black or red wire is 120 volts AC. The voltage between the black and red wire is 240 volts AC. The wiring identified in your post (14/3) can be used to power an appliance requiring 240 volts AC and no more than 15 amps or for 2 separate 120 volt 15 amp AC circuits.

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 55213443 100-Feet 12-Gauge 2 Conductor 12/2 Low-Voltage Underground Direct Burial Landscape Lighting Cable, Black

Southwire

Based on 468 reviews Check latest price

Product description

For use with outdoor low voltage lighting systems operating at 30 volts or less. 12-Gauge, 2 Conductor, Low-Voltage Underground Direct Burial Landscape Lighting Wire. Rated 150-Volt. Rated -20-Degree C to 60-Degree C. Listed for Outdoor Use Sunlight Resistant. Suitable for Direct Burial. Stranded Copper Conductors. Black PVC Insulation/Jacket. Southwire's Low-Voltage Underground Landscape Lighting Cable is manufactured with two bare annealed flexible stranded copper conductors and premium-grade PVC insulation/jacket material. The insulated conductors are duplexed in a flat construction to promote easy teardown during installation. Standard color is black. White and brown colors are available, but may be subject to minimum order quantity. Southwire's Low-Voltage Low Energy Underground Landscape Lighting Cable is suitable for outdoor accent lighting, landscape lighting and security lighting applications not exceeding 150-Volt. This product can be installed outdoors exposed to sunlight. Low-Voltage Underground Landscape Lighting Cable is suitable for use at temperatures not exceeding minimum -20-Degree C or maximum 60-Degree C. Southwire Low-Voltage Low Energy Underground Landscape Lighting Cable adheres to the following specifications: UL 1493, CSA, Requirements of the NEC, RoHS Compliant. Southwire provides a full line of products, in both copper and aluminum, for a wide range of applications. The company leads the industry in new and innovative products that help simplify installation, saving time and money. In addition to its standard product line, Southwire can also make custom products offering its customers the most complete line of products for almost any requirement or situation. No matter what the residential, commercial, or industrial application requires, you need look no farther. Southwire has just the right wire and cable product you're looking for.

From the Manufacturer

12-Gauge, 2 Conductor, Low-Voltage Underground Direct Burial Landscape Lighting Wire. Rated 150-Volt. Rated -20-Degree C to 60-Degree C. Listed for Outdoor Use Sunlight Resistant. Suitable for Direct Burial. Stranded Copper Conductors. Black PVC Insulation/Jacket. Southwire's Low-Voltage Underground Landscape Lighting Cable is manufactured with two bare annealed flexible stranded copper conductors and premium-grade PVC insulation/jacket material. The insulated conductors are duplexed in a flat construction to promote easy teardown during installation. Standard color is black. White and brown colors are available, but may be subject to minimum order quantity. Southwire's Low-Voltage Low Energy Underground Landscape Lighting Cable is suitable for outdoor accent lighting, landscape lighting and security lighting applications not exceeding 150-Volt. This product can be installed outdoors exposed to sunlight. Low-Voltage Underground Landscape Lighting Cable is suitable for use at temperatures not exceeding minimum -20-Degree C or maximum 60-Degree C. Southwire Low-Voltage Low Energy Underground Landscape Lighting Cable adheres to the following specifications: UL 1493, CSA, Requirements of the NEC, RoHS Compliant. Southwire provides a full line of products, in both copper and aluminum, for a wide range of applications. The company leads the industry in new and innovative products that help simplify installation, saving time and money. In addition to its standard product line, Southwire can also make custom products offering its customers the most complete line of products for almost any requirement or situation. No matter what the residential, commercial, or industrial application requires, you need look no farther. Southwire has just the right wire and cable product you're looking for.

  • VERSATILE OUTDOOR LIGHT CABLE FOR LOW VOLTAGE USES: Suitable for low voltage outdoor uses like accent lights, path lights or spotlights, beautifully-lit garden
  • DURABLE OUTDOOR CABLE: having a water, dust and dirt resistant vinyl jacket. Withstands prolonged sun exposure, offers long-lasting durability
  • TANGLE-FREE LOW VOLTAGE OUTDOOR CABLE: Doesn’t crack under high heat or turn hard in the cold. Remains tangle-free for ease of use
  • INDUSTRIAL-GRADE QUALITY LIGHT CABLE FOR OUTDOOR USE SPECIFICATIONS: 100 ft, 12 gauge, rated for direct burial for low voltage garden lights
  • TEMPERATURE RATING: Rated for temperatures from -40˚F to 140˚F
  • UL listed, CSA certified, RoHS compliant, Greenspec approved

User questions & answers

Question: are the polarity markings easy to see? thx
Answer: It all depends on what you are running, so the short answer is yes, however as far as I am aware it is only rated for 20 amps therefore you need to check the amount of continuous amps whatever device you are powering requires. Hope this helps..
Question: Are they water resistant? Must I bury them or may they lay on the dirt
Answer: The short answer is NO. It is only good for 20 amps. If you are drawing all the power through one cable Ie: from the main to a secondary breaker box in the "Tiny House" use at least an 8/3 assuming that you will be installing a 220 volt outlet somewhere. If it is all 110 volt then 8/2 will do the job. As I said this is the short answer, I hope it helps good luck, Dave...
Question: Copper coated
Answer: No this is for internal use only and where there is no water ingress. You need the grey coated cable for outdoor use and if you shop round ( Big Box Store ) you can find it for a similar price. Hope this is of some use to you. Best of luck. Dave
Question: speaker use
Answer: Solid

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 28827423 100' 14/2 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, White

Southwire

Based on 1 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 14 gauge, 2 conductors with ground, 100' per coil
  • Made in America

User questions & answers

Question: bought Costco dusk to dawn LED light plan to install on each side of garage door, would this work? hook up to existing outlet for garage door
Answer: Yes. Mine was copper wire.
Question: Wat wire do u have for 220v
Answer: I am not a professional but I used it to wire florecent lighting in my own basement.Per the other posters, I think you would want to make sure the product meets local. code
Question: Can i use this outside, inside a shed
Answer: Yes. This is for 15 amp circuits. If you have 20 amp circuits, use 12/2. Don't wire anything unless you thoroughly understand what you're doing. If in doubt, use a licensed electrician.
Question: Can I use wire to power a commercial automatic gate opener
Answer: This is 14 gauge wire. If you are asking for the diameter of both strands and the casing, it would be about 1.25 inches. I hope this helps.

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 63948426 100' 10/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Orange

Southwire

Based on 370 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 10 gauge, 3 conductors with ground, 100' per coil
  • Made in America

User questions & answers

Question: Have a house in the philippines. contracter used wiring i wouldn't use for a christmas tree. if i were to replace. replace with what? 220volts
Answer: You don’t need polarity markings on wire like this AFAIK. I used this to install 10 lights and they all work great. I’ve also done 10 in my backyard without regards to polarity and working great with same wire
Question: Have a house in the philippines. contracter used wiring i wouldn't use for a christmas tree. if i were to replace. replace with what? 220volts
Answer: Either is acceptable
Question: is this copper wire
Answer: No copper wire.stranded
Question: will this handle 50 amp
Answer: 12/2 speaker wire is less than half the price of this outdoor wire.

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 28828255 250' 12-2 NMW/G WIRE, 12 AWG, Yellow

Southwire

Based on 455 reviews Check latest price

Product description

Type NM-B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600 volts. PVC (polyvinyl chloride) jacket and PVC insulated, nylon jacketed conductors with ground (WG). Flame-retardant and crush-resistant. UL (Underwriter's Laboratories) listed.

From the Manufacturer

For general wiring of homes; farm buildings; stores and shops. It is flame and moisture resistant; but should not be used in wet locations. Type NM-B is primarily used in residential wiring as branch circuits' for outlets; switches; and other loads. NM-B may be used for both exposed and concealed work in dry locations at conductor temperatures not to exceed 90oC. Ampacity limited to 60oC for conductors

  • Type NM-B cable is designed specifically for use in residential and commercial wiring of branch circuits. Installation above ground and in dry locations only. Approved for service to 600 volts. PVC (polyvinyl chloride) jacket and PVC insulated, nylon jacketed conductors with ground (WG). Flame-retardant and crush-resistant. UL (Underwriter's Laboratories) listed.

User questions & answers

Question: Can this wire be used in a crawl space attached to joists
Answer: Would be an amperage question. Don’t want to overload the circuit. Probably easier to put it on it’s own 15amp breaker
Question: How much does it weigh
Answer: Hello, Thank you for your interest. We have many different gauge wires available, 14 through 6. We have 2 wire plus ground and 3 wire plus ground varieties. Different appliances use different wires for 220v. It will depend on what you're using the wire for. A licensed electrician can tell you what wire you'll need. If you'd like to get back to me when you find out which wire you need, I can get you prices. Thank you.
Question: Is this a 3 wire cable
Answer: Yes it can be used to wire a shed, however it is not intended to be buried to run power to the shed.
Question: the wire is used inside can I use it underground as out side under ground
Answer: It all depends on how much current the gate opener draws, as long as it's less than 15 amps, this wire is perfect to run power to the gate opener.

Southwire 63948422 50' 10/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Orange

Southwire

Based on 905 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 10 gauge, 3 conductors with ground, 50' per coil
  • Made in America

User questions & answers

Question: what size waterproof conduit needed
Answer: Hi, I'm not really sure. I bought this for my son who is using it in a new garage he's having built. If I were you I would contact a contractor who knows this stuff...but I would definitely change the wiring if it's as bad as you say. For safety reasons..
Question: can I use this for electric stove
Answer: This will work well. Good quality wire. Good luck. Dave
Question: can this run underground
Answer: yes
Question: Solid or stranded wire
Answer: No. 10 gauge is for 30 Amps. 6 gauge is for 50 amps

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 28829022 50' 10/2 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Orange

Southwire

Based on 813 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 10 gauge, 2 conductors with ground, 50' per coil
  • Made in America

User questions & answers

Question: Is this made by southwire? real southwire has a part number of 28829022. this has a 22070t number and slightly different packaging
Answer: As long as your application does not call for plenum.
Question: What gauge would I put a 60A/220v welding machine on
Answer: About 9 pounds, I am thinking. Go down to Lowes or Home Depot and lift one off the rack and see what you think.
Question: Is this wire ok to use in a bathroom
Answer: 2 wire w ground
Question: Can I use this wire on a 20 amp breaker
Answer: No, not up to code even in conduit, you need UF (Underground Feeder) cable. http://www.amazon.com/SouthWire-Company-13055955-Wire-250-Foot/dp/B001D4A9EO/ref=sr_1_12?ie=UTF8&qid=1446989592&sr=8-12&keywords=underground+feeder+wire

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Southwire 63948421 25' 10/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Orange

Southwire

Based on 217 reviews Check latest price

Product description

For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

  • Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
  • Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
  • UL Listed type NM-B
  • 10 gauge, 3 conductors with ground, 25' per coil
  • Made in America

User questions & answers

Question: is this wire stranded or solid conductor? i would assume the ground is solid, but i am asking about the ofher three wires
Answer: I would suggest 1” minimum if you want to be able to move this any distance, especially through any sweeps. This is heavy, stiff wire.
Question: can i pull this wire through 3/4" pipe
Answer: Hi David, I'm not an electrician and I dont play one on TV. 10/3 wire is typically rated for a max load of 30 apps, so depending on what you electric stove requires, may or may not be applicable. I used this to connect my genny to the transfer switch/panel which only supports 30 amps.
Question: Is this the correct wire for running a 220 line to an air compreesor in a shop
Answer: Only in conduit. This is not direct burial rates cable.
Question: Is this wire solid or stranded
Answer: Solid

Product features

Southwire’s Wire and Cable: A Constant Innovator For Your Installation Needs

Southwire continues to innovate to bring solutions to the electrical industry as one of the leading manufactures of wire and cable. With nearly 70 years of experience, our wire and cable products are designed to help simplify installation, reduce labor and material costs, while assisting to create a safer work environment.

Latest Reviews

View all