10 best johnson gas furnaces

Product description

This is a Brand New Replacement Gas Furnace Water Heater Thermocouple

• This is a Brand New Replacement Gas Furnace Water Heater Thermocouple
• Top Quality Replacement Part!
• Upgraded Replacement for
• 48"
• Thermocouple

Product description

This is a Brand New Replacement Gas Furnace Water Heater Thermocouple

• This is a Brand New Replacement Gas Furnace Water Heater Thermocouple
• Top Quality Replacement Part!
• Upgraded Replacement for
• 36"
• Thermocouple

Product description

A gas furnace igniter allows certain furnace models to start or heat up. When this part fails or begins to fail the gas furnace will fail to start or fail to heat. This flat-style gas furnace igniter is compatible with a wide variety of models and brands. Handle with care: The igniter element is extremely fragile. Always take appropriate safety precautions when performing troubleshooting or repairs.



⚠️ Verify compatibility with your model or ask a question before ordering



⚠️ Unbox and handle with care: The igniter element is extremely fragile

• ✫ Model Number 025-32625-000 S1-025-32625-000 Norton-271N S1-02532625000 S1-02535325000 025-32626-000 025-31801-000 025-30277-700 025-31802-000 025-30385-700 41501 DS016KX IGN70 IG1124 gas furnace igniter for many gas furnace models from top brands such as York, Luxaire, Coleman, Air Pro, Coleman-Evcon, Fraser/Johnson, and Unitary Products Group
• ✫ May be needed to address issues with gas furnace failing to start or failing to heat up during operation
• ⚠️ Verify compatibility with your model or ask a question before ordering
• ⚠️ Unbox and handle with care: The igniter element is extremely fragile

User questions & answers

Question:	My current igniter says norton 271n 81401018s it’s from a coleman evcon. will your igniter fit
Answer:	What size filter are you looking for? This listing has 3 choices - both of the choices that have a description of mpr 1550 are actually called allergen reduction filters & clearly state that they are mpr 1550. I use one of these sizes & always get the 1550. If you need 16X25X4 it's called allergen defense filter mpr 1000. I couldn't find any other statement in the description that listed the mpr - so to me it's unclear. You might want to contact amazon customer support to verify the mpr, but also, the product can be returned if it's not what you were looking for.
Question:	Is this compatible with York diamond
Answer:	The one I purchased was 20x25x4. If you only have option for 1 inch thick, then it sounds like they are out of the 4 inch version.
Question:	Is this compatible with amana gcic090cx30? My current ignitor says 10735002 and has 271n
Answer:	When it gets dirty on the air intake side. Don't wait for it to get caked with dust as this will cut down on air flow and make your furnace/air conditioner work harder to reach your desired temperature. Filter vendors often recommend changing 4 times per year, but your mileage may vary depending on how much you heat and cool and the cleanliness of the air being moved. I change about 3 times per year, but I could go to twice. Do you change your car filter? How dirty does that get? Be sure the actual size of the filter is correct for your blower. Filtrete nominal sizes and actual sizes differ. I got stuck with 4 filters I can not use. I bought the size 16x25x4, but the end of the filter has the actual size: 16 x 24 1/2 x 4 1/2. the 4 1/2" dimension is too large to fit.
Question:	Can i get a confirmation if this is the part i need. my model number is 271m and then following this shows lh33zs
Answer:	While I am not sure the Filtrete Allergen Reduction Filter is exactly the same as the Filtrete filter shown in the following commercial website, the table shows a MERV of 11 for a MPR of 1500. All the products seem to be 1" rather than 4." I don't know if that affects the MERV. http://www.iallergy.com/filtrete-air-filter-comparison.phpThe bottom of this commercial website page also describes the relationship of MERV, MPR, and FPR ratings for AC and furnace filters:http://www.bestfilters.com/AC-Furnace-Filters_c_605.htmlBased on my reading of the table, a MERV of 11 seems consistent with MPR of 1550.

Product description

This hot surface ignitor is the replacement for many York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro furnaces made by Unitary Products Group. This ignitor has insulated wires that are 5-1/4" long. The wires are terminated with the proper OEM plug (see photos) and requires no splicing or modifications. This part will also replace the spiral ignitor used on models P1UK, P9MP, P2MP, P2DP, PAKU, PBKM, PBKD, XEUO2, XEMO2, and XEDO2. This part replaces part numbers 025-32626-000, 025-31801-000, 025-30277-700, 025-31802-000, 025-30385-700 and 025-32625-000. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a "hot spot" and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

• Duralight Two Year Warranty
• Made In USA
• Correct OEM Plug Requires No Modifications
• 5-1/4" Long Insulated Wires - Includes Two High Temperature Ceramic Wire Nuts
• Replaces Unitary Products Group York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro Part Numbers S1-02535325000, 025-32626-000, 025-31801-000, 025-30277-700, 025-31802-000, 025-30385-700 and 025-32625-000

User questions & answers

Question:	Will this fit a rheem criterion ii model: Fgpj-10nbrjr
Answer:	Yes, they have metal wires I have used them for years. Good price and filter. I change out every 3 months but if extreme hot weather with AC on a lot change out 2 month
Question:	Is this compatible with york furnace model #g1fa036s17a? i have searched google and cannot find the answer
Answer:	I could only guess most likely in USA I bought these filters at a liquidation sale
Question:	will this ignitor replace a norton 271n
Answer:	For my household it captured dog hair, dirt, and an unbelievable amount of dust.
Question:	what should i do if my replacmeant igniter doesnt work
Answer:	The filters hard on systems are those mesh metal. Hard for the air to get through. This type is very good and seem to last longer that the cheap blue no pleated filters.I am pleased with mine and only use this type in my unit that works 12 months ..AC and then Heat. Just make sure the size is correct for your unit.

Product description

Bgn891-1C, Baso Bgn891-1C Module For Lennox 60J00 Lennox Pulse Furnaces, Baso, BASO BGN891-1C Module for Lennox 60J00 Lennox Pulse Furnaces. Made in United States. Manufactured by Baso Gas Products LLC.

User questions & answers

Question:	Will this module replace johnson control g891tca
Answer:	I can tell you they’re not as listed there’s no way this thing is 4 inches
Question:	I purchased this baso bgn891-1c 5 months ago and it is now not working. is there any warranty on the product
Answer:	The 16x20 runs half an inch short in length and width. Likely the same for the 16x25.
Question:	Can I return this if it does not work
Answer:	The FilterBuy 16x25x4 MERV 8 Pleated AC Furnace Air Filter has an actual size of 15 3/8" x 24 3/8" x 3 5/8". If this is the exact size of the filters you need, then this should fit. Otherwise, please check the 16x25x5: https://www.amazon.com/FilterBuy-16x25x5-Honeywell-Pleated-Filters/dp/B00NVF4U1G?ref_=w_bl_hsx_s_hi_web_13109929011. Please call us at 855-345-8289 or email me directly at [email protected]
Question:	where is the green light located on the outside of the unit
Answer:	Throw it as far as you can. See what happens.

Product description

ICM2902 IPI Gas Ignition Control - replacement for popular models, including Lennox 30W33 and JCI G776RGD-14 series controls.

Product features

ICM Controls OEM Replacement

ICM282A Furnace Control - with software for enhanced controls operation in counter flow and down flow furnace applications. Replacement for OEM models including Carrier HK42FZ0-xx series control boards.

Delay on Break Timer

Compressor lockout/Anti-Short cycle timer helps to protect compressors from damage caused by rapid short cycling simple, 2-wire hookup adjustable timing universal voltage. made in United States. Manufactured by ICM Controls.

Compressor lockout/anti-short cycle timer, Helps to protect compressors from damage caused by rapid short cycling. Simple, 2-wire hookup. Adjustable timing. Universal voltage.

Furnace Control Replacement

Furnace Control - Replacement For Oem Models Including Carrier Ces0110057-Xx Series Control Boards. Low Cost Form, Fit And Functional Replacement Board For Carrier Ceso11005700/01/02. Controls Gas Valve, Ignitor, Blower Motor, Inducer, Humidifier And Air Cleaner. Secondary Brownout Voltage Protection.

Diagnostic Fault Codes (Blinking Led) For Simple Troubleshooting. Made in United States. Manufactured by Icm Controls.

Fan Blower Control OEM Replacement

Fan Blower Control - replacement for OEM models including Carrier CES0110017/18 and HH84AA-x series control boards. Specifically designed to replace popular gas furnace centers, Pin selectable blower delays. High power, relay output, Dual function fan delay timer, Controls the circulating fan in heat pump, A/C and forced air systems.

Product description

This flame sensor is the direct replacement for many York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro furnaces made by Unitary Products Group. This flame sensor is straight and measures 2-7/8" from mounting flange to tip. The exposed portion of the sensor tip is 2-1/2" long. The wire termination is a 1/4" quick connect terminal. This part replaces 025-25434-000, 025-25434-700, 025-27773-700, S1-02527773000 and S1-02527773700. Do not clean flame sensors with sandpaper- the grit will melt into glass and the sensor will not work. Clean with steel wool or a Scotchbrite pad. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

• Duralight Two Year Replacement Warranty
• Straight Flame Sensor
• Overall Length 3-3/4" (Not Including Electrical Terminal)
• Ceramic Length 1" - Flame Rod Length 2-1/2" - 1/4" Male Quick Connect Terminal
• Replaces York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro Part Numbers 024-27773-000, 025-25434-000, 025-25434-700, 025-27773-700, S1-02527773000 and S1-02527773700

User questions & answers

Question:	Will this fit york diamond furnace model g1fa036s17a
Answer:	My gut feeling would be yes but I would consult with a GC or the manufacturer to confirm. Of note htis product is normally used for fire barriers to obtain the desired fire rating. I do not know if it is for outdooruse. Please consult the manufacturer.
Question:	Does this come with the small screw to hold it in place
Answer:	No once fully cured it will not dissolve when water gets on it water based means it cleans off your tools and hands with warm soapy water no need for pain thinner.
Question:	Will this for coleman evcon model 7681-8191/a
Answer:	According to 3M's website, it can withstand with to four hours of fire protection, when properly installed. I don't know how this converts to a specific temperature. http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Products/~/3M-Fire-Barrier-Sealant-CP-25WB-10-1-fl-oz-Cartridge-12-case?N=8710080+4294921555&rt=rud

Product description

Furnace Flue Exhaust Blower 1/20 hp, 1.8 amps, 115V Shade Pole Motor 1-Speed, 3400 RPM Includes foam gasket Ball Bearings motor has 2 leads with plastic 2-pin connector 1 Year Manufacture Warranty

User questions & answers

Question:	Will this work for an Armstrong Ultra SX 90, Ametek model
Answer:	Thank you for your inquiry. Good news: This part is fully compatible with your model!
Question:	Will this blower replace Armstrong ultra 5 advantage
Answer:	Thank you for your inquiry. Good news: This part is fully compatible with your model!
Question:	Will this replace fasco
Answer:	Thank you for your inquiry. Good news: This part is fully compatible with your model!
Question:	will this motor(Fasco fb-rfb547) replace Lennox 68k
Answer:	No it is a fire barrier not a high temp sealant which is what you need.

Product description

This is a genuine replacement part. The model number and name for the following item is: Honeywell S8610U3009 Module.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Honeywell S8610U3009 Module

• Manufacturer Model S8610U3009
• Genuine Replacement Part
• Honeywell item
• Country of Origin: China

User questions & answers

Question:	Will this replace my johnson controls board 63k
Answer:	Hi Debbie,The model number you have is for a cased cooling coil that is connected to your furnace. This would be the correct ignitor for a furnace that was built around the same time as that coil. If you look at the detailed photos on Amazon and compare them to your existing part you could verify this. Thanks for your inquiry.
Question:	Can i use this item on a honeywell furnace s86f
Answer:	I'm sorry but I don't knpw
Question:	How do I return this item
Answer:	Return it for a refund if you believe it is defective. If there is no voltage to it then the problem is elsewhere.
Question:	Will this replace ut electronics 1003-600a series
Answer:	Thank you for your inquiry. Good news: This part is fully compatible with your model!

Product description

This ignitor is the "wide" style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion if the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004.

• Model Number: CECOMINOD002711
• Item Package Length: 6.099999993778"
• Item Package Width: 3.099999996838"
• Item Package Height: 3.099999996838"

User questions & answers

Question:	Will this work in a gas oven (Peerless Premier
Answer:	Afraid I don't know about your warranty. But you can use the Link below the product information on the Amazon product page to ask the seller about the Manuf. Warranty. I bought mine in 2014 and it is still working. Good luck.
Question:	Is this Ignitor made of silicon nitride
Answer:	i can return part not works
Question:	will it work withcomfortmaker
Answer:	If you are looking at the control and the wires are on the left side. Straight across from the spark and sensor connections, there is a small off set in the cover. There is a LED that is mounted on the board, that comes on when there is a call for heat.
Question:	Checkout gave me an error. the shipping address that i put in won’t accept.are you not shipping to edmonton,alberta, canada
Answer:	I'm sorry I don't know, in our furnace the piece had the model number we needed that's how I was able to order it