14 best propane wall heaters
Product description
Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. These heaters are great for use in your garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Blue Flame Garage Heaters burn with 99. 9% efficiency, and operates on Liquid Propane or Natural Gas. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 100-lb. tank or larger with two-stage adjustable regulator available from local gas company. INNOVATIVE – Can be operated with Propane OR Natural Gas DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas Comfort – Heater automatically adjusts to your desired temperature; just like your home thermostat SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected & Wrong Fuel Shut-Off CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.
- Dual fuel technology allows the unit to be operated with Liquid Propane or Natural Gas
- Blue Flame Technology works by convecting heat to warm the air the same way as a central heating system
- Up to 30, 000 BTU's/hr heats up to 1, 000 sq. ft.
- Thermostat control knob automatically maintains your room's ideal heat level
- No electricity required allows for reliable back-up heating incase of an emergency situation
User questions & answers
Question: | Does this unit operate at higher elevations |
Answer: | Not that I can see |
Question: | How long would a 100lbs Propane tank last with this gas heater |
Answer: | It has a thermostat on the bottom so if its set to 3 when it hits room temp it kicks it down |
Question: | Is it listed as "garage" just because of the color? as far as i can tell it is the same as the bf30pmdg for the exception of the color |
Answer: | 8.75" (8 3/4) |
Question: | Can you use a 20 pound tank |
Answer: | The question "how high is the vent from the bottom of the heater" doesn't make sense to me. I installed mine according to the instructions with the exhaust/intake vent per the specs in the instructions. Maybe you could clarify you question more. Thanks |
Product features
Blue Flame Technology
Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.
Improved Circulation
Upgrade your unit with the optional fan (sold separately) for improved circulation in rooms up to 1000 sq. ft.
Built-in Oxygen Depletion Sensor (ODS)
Immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
Thermostatic Control System
Heater automatically adjusts to your desired temperature.
Product description
This Radiant 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**
- 30,000 BTU Liquid Propane heater to heat spaces up to 750 sqaure feet.
- Radiant heat burner. Ignition - Electronic
- Automatic low oxygen shut-off system (ODS). CSA Certified
- Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
- Theromostat, legs and wall mounting hardware included
User questions & answers
Question: | Where is the gas inlet located |
Answer: | If you are facing the front of the heater, the gas connection can be found on the lower right hand side coming from the rear. |
Question: | I am concerned about having to use a battery to ignite the pilot light. Is this a problem and are there other types of ignition systems |
Answer: | This uses a very small battery for ignition. The life of it is usually not an issue. |
Question: | After starting the unit up for the very first time and letting it heat up for 5 or so minutes my fire/smoke detectors went off, is this normal |
Answer: | I had a scenario where this heater made a serious billowing smoke show. Kicked the smoke detectors off immediately. Only happened 2- 3 times in a 2 ish year period. It happened with this propane heater too. Don't let this scare you though. Can happen with any infrared heater. It only happened several times over a period of about 2 years. So it probably only happened 1 out of a thousand times where the pilot light was on, but for some reason when it went to light up the burner bricks it malfunctioned and billowed out smoke like you wouldn't believe. Made it hard to get to the heater to turn it off. ALWAYS worked after simply turning it off, and ligting it up again. Maybe another reason why you must have working smoke detectors. Doesn't keep me from buying another one! Overcome your fears. Doesn't mean you won't first feel afraid if smoke suddenly starts pouring out of the kitchen. Lol. NEVER let your fears control you. Everything breaks it's just a matter of time. Keep safety # 1. |
Question: | what is the thermostat temperature range in degrees high/low |
Answer: | There is no real thermostat in Mr. Heater. It is more of a reostat the controls the time the 5 panels are on and off. At the number 1 setting the panels are on a short time and off a longer time. As you go from 1 up the panels stay on longer and the off time gets shorter. I have not been able to run on the 5 setting as the CO2 sensor turns the heater off after two cycles of setting 2. My external carbon dioxide sensor also goes off after 15 minutes of operation and on setting 2 and after the Mr Heater CO2 sensor turns off the propane. I would not recommend this heater to anyone. |
Product features
Radiant Vent Free Heaters
Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.
Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.
There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.
The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.
Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.
Product description
Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99. 9% efficiency, and operates on Propane only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 100-lb. tank or larger with two-stage adjustable regulator available from local gas company. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Manually adjust the heat setting to your desired temperature SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.
- Liquid Propane Ready (Fuel conversion not permitted)
- Blue Flame Technology works by convecting heat to warm the air the same way as a central heating system
- 16, 000-20, 000 BTU's/hr variable heat output for up to 700 sq. ft.
- Variable control knob offers the most customizable heat settings LOW - 16, 000 BTU MED - 18, 000 BTU HI - 20, 000 BTU
- No electricity required allows for reliable back-up heating incase of an emergency situation
User questions & answers
Question: | What regulator does it need |
Answer: | The double regulator |
Question: | Is this heater thermostat controlled |
Answer: | No thermostatic control to cycle on/off. |
Question: | is is there installiton instructions |
Answer: | Yes there is instructions, but if you order this heater also order the hookup kit and if you want it free standing you also need to order the legs seperately. The blower is also worth it. We love the heater and it's a lot better heater then the Mr Heater unit we replaced. |
Question: | How much LP gas does this burn an hour |
Answer: | hello , this unit burns arround .6 lbs per hour If you need additional information, feel free to give us a call at 877-447-4768. Thank you. - GHP Group Customer Service Team |
Product description
Stiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 208-240 VoltsStiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 208-240 Volts is ideal for bathrooms, kitchens, hallways, and any location where quick heat is needed. They feature surface-mount design with quick, easy installation, and can be installed over existing outdated heaters. They have a unique design that enhances decor. The compact design fits almost anywhere, and the downdraft design eliminates cold floors. The features also include quiet operation, built in thermostat, and quality construction. The Stiebel Eltron CK 20E electric wall mounted heater is a sleek alternative to conventional electric space or recessed heaters and provides quick heat in just about any location. It can be mounted anywhere in the house and has a new design to effectively and efficiently disburse heat throughout the general area. At 240 volts it produces 2000 watts of heat with a fan to help improve heat transfer. Stiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 208 Volts Specifications: 208 Volt 7.2 Amps 1.5 KW 15 Amp circuit breaker 14 AWG in. supply wire gauge Heating element: Nichrome Wire Thermostat: Bimetal type High limit: Bimetal type Motor: 18 Watt shaded pole Blower: Galvanized steel, squirrel cage type Height x Width x Depth: 18 1/8" x 13 1/4" x 4 3/4"; 460mm x 335mm x 123mm Housing: Painted steel/plastic Model: CK20E Stiebel Eltron CK 20E (208-240V) Wall Mounted Electric Fan Heater, 240 Volts Specifications: 240 Volt 7.5 Amps 2.0 kW 15 Amp circuit breaker 14 AWG in. supply wire gauge Heating element: Nichrome Wire Thermostat: Bimetal type High limit: Bimetal type Motor: 18 Watt shaded pole Blower: Galvanized steel, squirrel cage type Height x Width x Depth: 18 1/8" x 13 1/4" x 4 3/4"; 460mm x 335mm x 123mm Model: CK20E Housing: Painted steel/plastic
From the Manufacturer
Stiebel Eltron CK 20E Wall Mounted Electric Fan Heater-240V/2000 watts offers and exciting room heating alternative for new construction and renovation projects. This unit is an ideal replacement for recess-mount heaters.
- Surface mount design
- Quality construction
- Quiet operation
- Built in thermostat for maximum comfort
- Reliable performance
User questions & answers
Question: | Can this be mounted high instead of low on the wall? Would higher be a safety issue? I need a heater for my toddler's room that he cannot get to |
Answer: | Yes, the model H4810 is BPA free. If you need additional assistance, please contact [email protected] or call 1-866-603-5900 |
Question: | How much airflow is there? i cannot find a cfm rating.... help |
Answer: | Yes, you can see through the tank to see where the water level is. If further assistance is needed please contact us at [email protected] or at 866-603-5900 X213 M-F 8:30-4:30 EST. |
Question: | what is the maximum room size for one unit |
Answer: | You can change the mist output to low, medium or high. This unit does not offer the capability to set a certain percentage. If further assistance is needed please contact us at [email protected] or at 866-603-5900 X213 M-F 8:30-4:30 EST. |
Question: | I have an old (and utterly useless) 220v baseboard I was thinking of replacing with this. What is the advantage of 220v over |
Answer: | In winter of January 2018 we used only Distilled Water and had NO WHITE DUST PROBLEM. In winter of Dec. 2018 to Mar. 2019, we used only Tap Water and had a white film appear on every vinyl surface and shelf surface in the two Bedroom apartment - even on vinyl CD cases inside a binder. |
Product features
Made in Germany
All CK heaters are made by us in our factory in Germany. We pride ourselves on a reputation for engineering & manufacturing excellence since 1924.
Ultra quiet fan
CK and CKT heaters have galvanized steel, squirrel cage type blowers that operate at a quiet 49.7 dB(a). The glass-reinforced poly-carbonate, radial type blower in CK Trend heaters operates at an even quieter 49 dB(a).
Even-heating down-draft design
CK and CKT heaters pull in cool room air from the top and blow warm air out the bottom. This down-draft design helps to evenly heat a space for maximum comfort.
Stand-alone or supplemental heat
CK heaters can be the sole heat source for small rooms. They can also supplement heat to a room that doesn’t get warm enough from a central source, as sometimes happens with a mini-split retrofit.
Built-in thermostat
All CK heaters have an integral thermostat for easy heat adjustment. CK and CKT heaters can be controlled by a wall thermostat in a room larger than 215 sq. ft.
Booster timer on CKT
The CKT booster timer outputs heat at maximum for up to 60 minutes. When the timer goes off, the CKT reverts to its thermostat setting, maintaining comfort at the original setting.
Frost protection setting
CK heaters have a frost protection setting. The lowest thermostat setting will maintain above freezing temperatures in an appropriately sized space.
CK Trend On/Off Switch
The CK Trend’s convenient and positive on/off switch completely shuts the heater off when it is not needed. The off position will disable the frost protection setting.
Installation notes
These heaters are not supplied with a cord and must be hard-wired.
CK and CKT models stick out 5“ from the wall and the CK Trend models 5⅛”.
Because these are fan heaters that blow warm air out the bottom, the recommended installation location is about 6-8” off floor, with 4” for a minimum.
All CK heaters should be mounted vertically.
Observe all installation manual precautions regarding minimum allowed clearances between the installed appliance and any hard surfaces.
Do not allow combustible materials on or near the heater.
Product description
Dyna-Glow wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99. 9% efficiency, and operates on Propane only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 100-lb. tank or larger with two-stage adjustable regulator available from local gas company. two-stage adjustable regulator available from local gas company. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Heater automatically adjusts to your desired temperature; just like your home thermostat SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.
- Liquid Propane Ready (Fuel conversion not permitted)
- Blue Flame Technology works by convicting heat to warm the air the same way as a central heating system
- 24, 000-30, 000 BTU's/hr. adjustable heat output for up to 1, 000 sq. ft.
- Thermostat control knob automatically maintains your ideal heat level
- No electricity required allows for reliable back-up heating incase of an emergency situation
User questions & answers
Question: | Just bought brand new and pilot keeps going out, how do i fix this |
Answer: | You need to hold the control knob down for 30 to 60 sec after pilot lights |
Question: | Can the outer white casing be painted |
Answer: | Hello, we do not recommend painting it. If you need additional assistance, we're happy to help! Just reach out by phone at 877-447-4768 or email here: http://www.ghpgroupinc.com/CTUS.html -GHP Group Customer Support- |
Question: | Why does the heater "click" when it turns off |
Answer: | the valve is closing. thank you |
Question: | Does anyone have a problem with the pilot light going out |
Answer: | Yes. We returned it. You can try adding more oxygen to the room with your heater. Fresh air or air from another room. |
Product features
Blue Flame Technology
Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.
Improved Circulation
Upgrade your unit with the optional fan (sold separately) for improved circulation in rooms up to 1000 sq. ft.
Floor Installation Option
Add on the optional base legs (sold separately) for floor installation.
Manual Control System
Choose your ideal temperature with the turn of a knob and three adjustable settings.
Product description
Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99. 9% efficiency, and operates on Propane only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 100-lb. tank or larger with two-stage adjustable regulator available from local gas company. two-stage adjustable regulator available from local gas company. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Manually adjust the heat setting to your desired temperature SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.
- Liquid Propane Ready (Fuel conversion not permitted)
- Blue Flame Technology works by convecting heat to warm the air the same way as a central heating system
- 24, 000-30, 000 BTU's/hr variable heat output for up to 1, 000 sq. ft.
- Variable control knob offers the most customizable heat settings LOW - 24, 000 BTU MED - 27, 000 BTU HI - 30, 000 BTU
- No electricity required allows for reliable back-up heating incase of an emergency situation
User questions & answers
Question: | Is this manufactured in the U.S |
Answer: | Please contact Bromic Presales Support for additional questions. 800.301.1293. |
Question: | Will this heater cut on and off to maintain temp. Or does it run continuously |
Answer: | We used the Amazon installation service and it was less than $100.00. |
Question: | Can a thermostat be added |
Answer: | Yes, for mounting to a wall. They do not include fasteners, as you need to procure ones locally that are appropriate for the material you are connecting to. |
Question: | Does this heater have a thermostat |
Answer: | Bromic (the manufacturer) claims it will heat 200 square feet. IMO it will heat about 100 square feet or roughly a 10-foot-square area. Warm Thanks - Alfresco Heating |
Product features
Blue Flame Technology
Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.
Improved Circulation
Upgrade your unit with the optional fan (sold separately) for improved circulation in rooms up to 1000 sq. ft.
Floor Installation Option
Add on the optional base legs (sold separately) for floor installation.
Manual Control System
Choose your ideal temperature with the turn of a knob and three adjustable settings.
Product description
Dyna-Glow wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in icehouse or lodge. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Icehouse Heater burns with 99. 9% efficiency, and operates on Propane only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 20 or 40-lb. tank (not included) with included 10 ft. propane hose and regulator. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Manually adjust the heat setting to your desired temperature SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all the necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.
- Liquid Propane Ready - 20 or 40 lb. tank only (Fuel conversion not permitted)
- Blue Flame Technology works by convicting heat to warm the air the same way as a central heating system
- Up to 10, 000 BTU's/hr. heats up to 300 sq. ft.
- Includes 10 ft. propane hose & regulator
- LOW-MED-HI variable control knob offers the most customizable heat settings
User questions & answers
Question: | Can you set this on the floor? Does it have legs |
Answer: | You can mount this model to the floor but requires the purchase of compatible legs (not included but available). It has safety recommendations in the user manual about safe locations for use (e.g., 3ft from curtains or furniture, whether your space will require additional ventilation, etc). You could look up the manual for more information. |
Question: | Set on high, how many pounds will this use an hour |
Answer: | Depending on your need and outside ambient temperature, it has been very useful for me. I have an outside patio that is my daily environment for TV and smoking, it works very well. Depending on the outside temperature (24-49) I use about 1- 20lb propane tank every 8-14 days, depending upon how warm I want to feel (65-70 degrees). It breaks down to about 2-3 dollars a day. Well worth the cost. |
Question: | Can it be ran off a 100lb tank |
Answer: | Hello, this unit can be used with 20, 40, 100lbs tanks. If you need additional information, feel free to give us a call at 877-447-4768. Thank you. - GHP Group Customer Service Team |
Question: | what size lp tank is required |
Answer: | "Liquid Propane Ready - 20 or 40 lb. tank only". I copied this right off the info provided on the description of the heater. And it works fine with our 20 lb tank. |
Product features
Blue Flame Technology
Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.
Improved Circulation
Upgrade your unit with the optional fan (Model #WHF100 sold separately) for improved circulation in rooms up to 1000 sq. ft.
Oxygen Depletion Sensor (ODS)
Turns the unit off when low oxygen levels are detected.
Manual Control System
Choose your ideal temperature with the turn of a knob and three adjustable settings.
Product description
This Blue Flame 20,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**
- 20,000 BTU Liquid Propane heater to heat spaces up to 700 square feet
- Blue flame burner for even convection heat. Run Time (Hrs at Max BTU)- 21.59. Fuel Consumption/Burn Rate (Gal/Hr)- .926 lbs/hr
- Automatic low oxygen shut-off system (ODS). CSA Certified
- Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
- Theromostat, legs and wall mounting hardware included
User questions & answers
Question: | It warns against using in elevations higher than 4,500 FT. Have you had success at |
Answer: | Yes, there have been units with success over 4,500 ft, what this means is we aren't able to guarantee successful operation of these heaters are higher than 4,500 ft. |
Question: | How many hours or days will it run with a 20# bottle |
Answer: | I recently insulated a 14’ x 20‘ workshop attachment on my garage. I got this heater and before I bought a big tank I tried it on a 10 pound tank from my grill. It was set on number one setting the temperature outside was in the 30s and I got 64 hours out of it holding just over 60°. So I figure a 20 pound bottle should last me little over five days. So I’m going to get a 30 pound bottle that way I only have to refill about once a week. Warmer weather less often, I hope this helps. |
Question: | It dont tell the dimensions? Is it 20" wide |
Answer: | The dimensions for the heater are 23 3/4" W x 11 1/4" D x 27" H. |
Question: | Can u use propane tank from a grill and how long would it last |
Answer: | Quick math says about 17 hrs on full tank. This heater has a high and low output, controlled by the thermostat, not the user. One gallon propane would last approx 4 hours. A full 20 lb tank holds about 4.5 gallons. |
Question: | how long does it last on a small propane tank |
Answer: | The 1# tank will ice up and slowly turn off the heater on anything but the lowest setting. That lasts about 2 hours. A little buddy heater with 4K/9K Btu works best with the 1# cylinders. I have the hose hookup for a 20# tank and it's nice to have the option of using either size. You have to light this one with a lighter which is just another thing to forget to pack. |
Question: | Just tried to make coffee on it and the grill started to collapse is there a sturdier grill for it |
Answer: | As far as I know... No. A simular thing happened to me. I reattached the grill using good old fashioned wire hanger twisted. This was only a temporary fix. |
Question: | Did anyone get the "foot" for the 1 lb. bottles and is it a worthwhile add-on |
Answer: | Not sure what you're referring to. The one lb. bottle hangs suspended when connected. I wouldn't recommend getting this model. Get the model MH12C if you can. The regulator broke after a couple months and I couldn't return it. Instead I bought the regulator that was for the MH12C and adapted it to fit the MH15C. Since then it's been working great for a year. I also recommend purchasing the hose adapter so you can run off a 20 lb. bottle. It'll last a lot longer |
Question: | how long does a 1lb bottle last compared to a 20lb bottle |
Answer: | A one pound bottle on medium setting will last about 1-1/2 hour so figure at least 25 hrs for a 20 pounder. |
Product features
Blue Flame Vent Free Heaters
Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.
Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.
There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.
The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.
Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.
Product description
This Radiant 10,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. It is equipped with a multi-output valve for easy temperature regulation and a convenient Piezo ignition built right into the rotation of the knob for one handed ignition. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**
- 10,000 BTU Liquid Propane heater to heat spaces up to 250 sqaure feet.
- Radiant heat burner
- Automatic low oxygen shut-off system (ODS). CSA Certified
- Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
- Legs and wall mounting hardware included.Run Time: 43.18 hrs
User questions & answers
Question: | I stripped the threads on the heater, how can i fix this |
Answer: | You can tap it out if you have a tap and die set, otherwise you will have to order new parts |
Question: | Want 30000 Btu radiant heater with blower |
Answer: | The 30000 BTU heater will be the model number MHVFRD30LPT. Click on link provided to view the heater. https://www.amazon.com/Mr-Heater-Corporation-Radiant-MHVFRD30LPT/dp/B01DPZ56KU/ref=sr_1_1?ie=UTF8&qid=1514918538&sr=8-1&keywords=MHVFRD30LPT |
Question: | Will this work with a 20 pound tank |
Answer: | Yes, but you will need to add a regulator between the heater and the 20 pound tank for safety |
Question: | So, it has no thermostat but output is variable? How does this work |
Answer: | It does NOT have a thermostat, settings are either high or low. It will NOT turn on and off on it's own when reaching certain temperatures, it even says its NOT thermostat controlled in the manual. |
Product features
Radiant Vent Free Heaters
Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.
Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.
There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.
The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.
Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.
Product description
Kick that pesky winter chill to the curb and remain warm this winter with the warm air power of the 18,000 BTU Radiant Propane Space Heater, White. Powered by a whopping 18,000 BTUs and reliable liquid propane, this heater is your solution to that frigid winter air lingering in your space. It utilizes a convection heating system that allows for a more thorough, natural-feeling heat. It's equipped to be used indoors or outdoors and has the ability to go where you do, thanks to the included legs and wall-mounting hardware. But what sets this heater apart from the rest of the pack is definitely the ease of use and user control this heater gives you. Simply hook up a propane tank to this heater and allow the battery-powered ignitions to blast some sweet, heat relief your way. Utilize the easy-to-use thermostat on the heater to dictate the amount of heat at any time. Stay warm forever and always with this portable space heater.
- Take the chill out of any room or space, inside or out up to 500 square feet
- Powered with reliable liquid propane (20# cylinder) with an output of up to 18,000 BTUs per hour
- Easily mount to a wall or secure to the floor with the included legs and wall mounting hardware
- Convenient thermostat allows you to be in total control of the temperature, even on the coldest days
- Completely safe operation indoors or outdoors with the automatic low oxygen shut off system (ODS)
User questions & answers
Question: | I ordered one of these but can't seem to find info on how it actually hooks up to the propane tank. Also, does it come with a tank |
Answer: | It does not include a tank. You can get a Mr Heater hose that is 3/8 npt on one end and a tank fitting on the other end. The inlet on the heater is 3/8 npt. |
Question: | Can this heater run with only the pilot flame on |
Answer: | It is self-contained and automatic. The pilot setting will keep only the pilot burning. In heating mode it will automatically turn on and off at the desired temperature. The optional fan is not required but does not need to be plugged in if installed. |
Question: | Does this have plate for built in fan |
Answer: | Yes. Also wired for the fan so it is thermostatically controlled. Fan sold seperately. |
Question: | How low can the thermostat be set? Can it keep a room just above freezing |
Answer: | I use it to supplement my forced air heat. I would imagine in a room that is prone to freezing with the unit on it's lowest setting it would cycle quite a bit. It definitely kicks out a lot of heat. |
Question: | How long will 20lb propaine last on lowest setting in insulated room |
Answer: | Say a 10' x 10' room; about 12 to 16 hours. You MUST have some fresh air coming into the room or the O2 depletion will shut the heater off. Propane need air to burn just like most flames. |
Question: | Is this safe in a 300 square foot cabin as the sole source of heat |
Answer: | This is very large for a room of that size. I would recommend the 20,000 BTU model. That is ASIN B01DPZ5B3. These are designed as supplemental heat but it could be used for your application. |
Question: | Does this product have built in regulator |
Answer: | You must use an external regulator. You need some other hardware if you are going to use it on the floor. Here is what you need: ASIN:B0002YPAFY Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant, ASIN:B0058DIGPU Anvil 8700137808, Steel Pipe Fitting, Nipple, 3/8" NPT Male x 4" Length, Black Finish, ASIN:B005R21QLS Mr. Heater 12-Feet Hose/Regulator Assembly, P.O.L. and Hand Wheel x 3/8-Inch Female Pipe Thread. If your heater did not include an elbow, get a 3/8" ASIN:B005C2U67I Anvil Malleable Iron Pipe Fitting, Class 150, 90 Degree Street Elbow, NPT Male x NPT Female, Black Finish. Put sealant on the outside threads only. Screw the elbow into the heater so that the opening faces the front of the heater. Screw the nipple into the elbow. Attach the feet that came with the heater. Screw the hose onto the nipple. Attach the other end of the hose to your propane tank. Check all connections with soapy water before lighting. |
Question: | Will this burn in high elevation |
Answer: | Yes as long as there is enough oxygen. Oxygen above 12000 feet altitude becomes thin and supports combustion less efficiently. |
Product features
Blue Flame Vent Free Heaters
Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.
Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.
There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.
The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.
Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.
Product description
This Blue Flame 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**
- 30,000 BTU Liquid Propane heater to heat spaces up to 750 square feet. Restricted in Canada
- Blue flame burner for even convection heat. Supplemental heat in cold rooms, Additions, Sun rooms, Cabins
- Automatic low oxygen shut-off system (ODS). CSA Certified. Fuel Consumption/Burn Rate (Gal/Hr) - 1.389 lbs/hr
- Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
- Theromostat, legs and wall mounting hardware included.Fuel Consumption/Burn Rate (Gal/Hr)
User questions & answers
Question: | How long will 20lb propaine last on lowest setting in insulated room |
Answer: | Say a 10' x 10' room; about 12 to 16 hours. You MUST have some fresh air coming into the room or the O2 depletion will shut the heater off. Propane need air to burn just like most flames. |
Question: | Is this safe in a 300 square foot cabin as the sole source of heat |
Answer: | This is very large for a room of that size. I would recommend the 20,000 BTU model. That is ASIN B01DPZ5B3. These are designed as supplemental heat but it could be used for your application. |
Question: | Does this product have built in regulator |
Answer: | You must use an external regulator. You need some other hardware if you are going to use it on the floor. Here is what you need: ASIN:B0002YPAFY Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant, ASIN:B0058DIGPU Anvil 8700137808, Steel Pipe Fitting, Nipple, 3/8" NPT Male x 4" Length, Black Finish, ASIN:B005R21QLS Mr. Heater 12-Feet Hose/Regulator Assembly, P.O.L. and Hand Wheel x 3/8-Inch Female Pipe Thread. If your heater did not include an elbow, get a 3/8" ASIN:B005C2U67I Anvil Malleable Iron Pipe Fitting, Class 150, 90 Degree Street Elbow, NPT Male x NPT Female, Black Finish. Put sealant on the outside threads only. Screw the elbow into the heater so that the opening faces the front of the heater. Screw the nipple into the elbow. Attach the feet that came with the heater. Screw the hose onto the nipple. Attach the other end of the hose to your propane tank. Check all connections with soapy water before lighting. |
Question: | Will this burn in high elevation |
Answer: | Yes as long as there is enough oxygen. Oxygen above 12000 feet altitude becomes thin and supports combustion less efficiently. |
Product features
Blue Flame Vent Free Heaters
Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.
Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.
There are two types of vent free heaters, blue flame (or convection heat) and infrared (or radiant heat). The difference in these types of heat are how the warm.
The Blue Flame heater warms the air. It doesn’t radiate the heat like an infrared unit. It can be put in a narrow area because the heat rises and warms the area from the ceiling down. Blue Flame warms the air, infrared warms objects, which heat the air.
Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.
Product description
ProCom Dual Fuel Vent Free Blue Flame Heater is built for durability and efficiency to keep your home toasty warm for many cold seasons to come. This compact, but solid heater gives you a reliable source of heat. It runs at 10, 000 maximum BTU which heats up to 500 square feet of living space. No electricity is required which is perfect for power outages or any in-house emergency. This dual fuel technology has one unit that operates on either natural gas or propane gas. Without compromising function for beauty, this versatile gas space heater has been redesigned for a slimmer and modernized profile to effortlessly fit into your home. Product Features 10, 000 Maximum BTU Heats Up To 300 Sq. Ft. 5 Heat Settings with micro heat adjustments between each setting! Safety Assurance: O. D. S. (Oxygen Depletion Sensor) Push Button Piezo Ignition System Safety Assured ANSI Certified System Product Dimensions: 21. 2″ H x 15. 79″ W x 6. 85″ D
- ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment.
- TECHNOLOGY - 10, 000 Maximum BTU using natural gas or propane gas which Heats Up To 300 Sq. Ft.
- DEPENDABLE - Thermostat Control – The control automatically cycles the burner on and off to maintain a desired room temperature, Ideal for greater heat flow that could add the warm atmosphere in your room.
- SAFE - Push button Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
- 1 Year Limited
User questions & answers
Question: | Considering for a tiny house RV.... how much propane does it consume |
Answer: | It will not work there, it must be in a stationary environment connected to a tank no less than 100lb capacity. |
Question: | Procom mg10tbf ventless dual fuel, does this take a special fitting for the gas line hook up to the unit |
Answer: | Its not special. Just a Standard Brass 3/8th by 1/2 NPT fitting. |
Question: | Does this heater come with a built in blower |
Answer: | no |
Question: | Does the system need a natural gas regulator in line |
Answer: | Natural gas will b regulated to 1/2lb at the meter propane needs a regulator |
Product features
ProCom Ventless Dual Fuel Blue Flame Thermostat Control Wall Heater – 10,000 BTU, Model# MG10TBF
ProCom Dual Fuel Vent Free Blue Flame Heater is built for durability and efficiency to keep your home toasty warm for many cold seasons to come. This compact, but solid heater gives you a reliable source of heat. No electricity is required which is perfect for power outages or any in-house emergency. Without compromising function for beauty, this versatile gas space heater has been redesigned for a slimmer and modernized profile to effortlessly fit into your home.
Blue Flame Technology
ProCom's Blue Flame Ventless Wall Heaters with Blue Flame Technology Included which help to provide feasible source of heat.
Thermostat Control
Thermostat Control allows you to set the thermostat to your ideal comfort level. Just one push of the button to enjoy a great source of dependable, affordable heat.
Wall Mounting
Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.
Safety
Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.
Product description
Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99. 9% efficiency, and operates on Propane only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 100-lb. tank or larger with two-stage adjustable regulator available from local gas company. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Manually adjust the heat setting to your desired temperature SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way
- Liquid Propane Ready (Fuel conversion not permitted)
- Blue Flame Technology works by convecting heat to warm the air the same way as a central heating system
- 8, 000-10, 000 BTU's/hr. variable heat output for up to 300 sq. ft.
- Variable control knob offers the most customizable heat settings LOW - 8, 000 BTU MED - 9, 000 BTU HI - 10, 000 BTU
- No electricity required allows for reliable back-up heating incase of an emergency situation
User questions & answers
Question: | automatic ignition |
Answer: | Hello Martha, this is a manual unit, it needs to be lit manually. it has a piezo ignition. If you need additional information or assistance, we're happy to help! Just reach out by phone at 877-447-4768 or email here: http://www.ghpgroupinc.com/CTUS.html - GHP Group Customer Support |
Question: | Glass in front of flame |
Answer: | No glass |
Question: | Does it have a tremostat |
Answer: | Hello ~ if you mean thermostat, no this heater does not have a thermostat. It can be set for high heat or low heat but it is not temperature controlled. Hope this helps! |
Question: | Why does it have to have 100 pound propane tank |
Answer: | This heater must be used with a propane tank of no less than 100 Ibs capacity. |
Product features
Blue Flame Technology
Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.
Improved Circulation
Upgrade your unit with the optional fan (sold separately) for improved circulation in rooms up to 1000 sq. ft.
Floor Installation Option
Add on the optional base legs (sold separately) for floor installation.
Manual Control System
Choose your ideal temperature with the turn of a knob and three adjustable settings.
Product description
ProCom Heating's Infrared Plaque Vent-Free Gas Space Heaters make supplemental heating fast and easy! Just push a button for easy ignition, stand back and enjoy a great source of dependable, affordable heat. These infrared plaque heaters work just like the sun's radiant heat, warming people and objects in the room first! No electricity is required which is perfect for power outages and ease of installation. It includes many exclusive features such as five heat settings with micro heat adjustments, the automatic thermostat control, and more. Added Value: Blower and Base Feet Included – A $48. 99 value! Product Features: 30, 000 Maximum BTU When Using Natural Gas 26, 000 Maximum BTU When Using Propane Gas Heats Up To 1, 000 Sq. Ft. Patented DUAL FUEL TECHNOLOGY 1 Unit operates off Natural Gas or Liquid Propane Thermostat Control – The control automatically cycles the burner on and off to maintain a desired room temperature. 5 Heat Settings with micro heat adjustments between each setting! Wall mounting bracket included for wall mounting option. Base feet included for mounting heater to the floor. Economical: 99. 9% efficient. No outside duct or chimney needed! Heat for only pennies an hour! Safety Assurance: O. D. S. (Oxygen Depletion Sensor) included with automatic shut-off No electricity required to operate heater! Push Button Piezo Ignition System PFS Certified Product Dimensions: 23 1/2" H x 26 5/8” W x 8 3/4" D Product Weight: 31 lbs. 1 Year Limited What's in the Box? Vent Free Heater - Qty. 1 Blower - Qty. 1 Base Feet - Qty. 2 Wall Mounting Bracket - Qty. 1 AAA Battery - Qty. 1 Hardware Package - Qty. 1
- TECHNOLOGY - 30, 000 BTU Patented DUAL FUEL TECHNOLOGY using Natural Gas or 26, 000 Maximum BTU When Using Propane Gas which Heats up to 1000 sq. ft. Area.
- COST-EFFECTIVE - BLOWER and BASE included. Added value!
- DEPENDABLE - Thermostat Control offers the most customizable heat settings, Ideal for greater heat flow that could add the warm atmosphere in your room.
- STYLISH - Included Wall mounting bracket with Space saving design without sacrificing beauty.
- ECONOMICAL - 99. 9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation.
- SAFE - Push button Piezo ignition with Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
- 1 Year Limited
User questions & answers
Question: | does this heater actually have a thermostat that turns the burner ff and on |
Answer: | You can tap it out if you have a tap and die set, otherwise you will have to order new parts |
Question: | Instructions say to not use a 20lb propane...does anyone know why not |
Answer: | The 30000 BTU heater will be the model number MHVFRD30LPT. Click on link provided to view the heater. https://www.amazon.com/Mr-Heater-Corporation-Radiant-MHVFRD30LPT/dp/B01DPZ56KU/ref=sr_1_1?ie=UTF8&qid=1514918538&sr=8-1&keywords=MHVFRD30LPT |
Question: | Can it sit on the floor |
Answer: | Yes, but you will need to add a regulator between the heater and the 20 pound tank for safety |
Question: | Does it come with propane hose and reducer |
Answer: | It does NOT have a thermostat, settings are either high or low. It will NOT turn on and off on it's own when reaching certain temperatures, it even says its NOT thermostat controlled in the manual. |
Question: | I stripped the threads on the heater, how can i fix this |
Answer: | The hose is about 3ft long I have the bottle on the floor and the heater on the table works just fine keeps my patio comfortable |
Question: | Want 30000 Btu radiant heater with blower |
Answer: | This thing is garbage. Broke in literally 2 days. It worked well the first time I used it, and could likely warm your garage. However, the quality isn’t there. |
Question: | Will this work with a 20 pound tank |
Answer: | I would not leave it out in the weather mine is in a screened patio which is cold and damp at times but the heater works just fine |
Question: | So, it has no thermostat but output is variable? How does this work |
Answer: | Yes I live in Northern California and have bought 2 over the years |
Product features
Radiant Vent Free Heaters
Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.
Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.
There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.
The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.
Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.
ProCom Heating Dual Fuel Ventless Infrared Gas Space Heater - 30,000 BTU, Model# MNSD5TPA-BB
ProCom Heating's Infrared Plaque Vent-Free Gas Space Heaters make supplemental heating fast and easy! Just push a button for easy ignition, stand back and enjoy a great source of dependable, affordable heat. These infrared plaque heaters work just like the sun's radiant heat, warming people and objects in the room first! No electricity is required. It includes many exclusive features such as five heat settings with micro heat adjustments, the automatic thermostat control, and more.
Blower and Base Included
ProCom's Blue Flame Ventless Gas Space Heaters comes with the Base Feet and the Blower preinstalled! This allows an easy initial setup and cost savings for you!
Thermostat Control
Thermostat Control allows you to set the thermostat to your ideal comfort level. Just one push of the button to enjoy a great source of dependable, affordable heat.
Wall Mounting
Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.
Safety
Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.
Latest Reviews
View all
Snap On Welders
- Updated: 09.07.2021
- Read reviews

Empire Droid Mini Cases
- Updated: 23.06.2021
- Read reviews

Ph Balance For Women Strips
- Updated: 27.07.2021
- Read reviews

Combi The Super Cars
- Updated: 02.04.2021
- Read reviews

Svp Micro Sd Cards
- Updated: 20.02.2021
- Read reviews