13 best ar 10 scope mounts

• 1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
• 30 mm diameter rings for mounting standard 30 mm rifle scope tubes
• Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts
• Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
• Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch

Product features

Crafted with Rigorous Specifications

Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! Each set of scope rings is precision crafted to a given height specification. Choose the height that matches your particular rifle setup and preferred cheek weld. Your shot is lined up just where you want it every time.

Made for 30mm Scope Tubes

30mm in diameter, the rings are built for use with standard 30 millimeter scope tubes. The base is compatible with all Picatinny or Weaver mounting systems. The torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.

Heat Treated Locking Mechanism

Mount your scope quickly and securely with our thumb locking nuts. These nuts can be tightened by hand or by torque wrench and allows one to quickly switch optics when desired.

The rings are crafted from lightweight 6061 grade aluminum, with a heavy duty steel mounting mechanism for extreme tolerance.

Product description

Vortex Cantilever Ring Mount for 1-Inch Tube w/ 2in Offset, 1. 59in/40. 39mm, Black CM-102, Matte, 2" Offset (1. 59" / 40. 39mm)v 2. 5" Between Rings

• Included Components: Set Of Rings

User questions & answers

Question:	Will these work for my vortex crossfire ii 3-9x50 riflescope w/ v-brite reticle(.270 rem adl rifle) ty
Answer:	My granddaughter opened all the doors at once. She is 2 1/2 years old. So no ours cannot cannot be reused in the way it was originally opened. But she had a wonderful time with the pieces!
Question:	How sturdy is this mount with a scope on it is it very secure
Answer:	I haven’t found the extra pieces to do that. I would like to get the stable so that the Advent calendar could turn into a regular nativity. I have found that you can get extra camels, but you really have to look for them. I would also like to be able to expand my granddaughters Noah’s ark set to the larger set. I haven’t been able to find those animals either.
Question:	Will this provide enough clearance to mount a 50mm objective NightForce Scope on top of an AR
Answer:	No. It comes in the set only.
Question:	Will this work on a Ruger precision rifle with the 20 moa base with the vortex viper pst 6-24x50 with the sunshade
Answer:	This product is for my granddaughter so it hasn’t been opened yet. Whole box measures 16”x 30”. Daily slots to be opened measure 2” x 3” with 2 slots that are larger. The manger is part of the cardboard packaging of the whole box. This looks like it will be fun for younger kids to count down the days in December.

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	Work for m1a eye relief
Answer:	If you want to do a durability test to see how many times you can send a pellet down range before it refuses to hold zero, you can use it on a magnum air rifle. If it is a variable pump, non-magnum (Below 1000 FPS) inert gas, springer (any speed below 700 FPS) or a PCP air gun the answer will be yes. Otherwise if you do expect to use it on a spring piston(springer) or magnum speed rifle of any make the answer will be you can try but your durability will suffer. I have killed 4 scopes over the last 2 years putting them on my pellet rifles(Barksa, Centerpoint, Simmons and Gamo). Now I use magnum airgun rated scopes (Cabela's Brand the best so far and UTG/Leapers).
Question:	Will this fit on a chiappa m
Answer:	Yes, I put it on my 30+ year old Marlin model 60 with the included rings and it not only bolted right on, but I was on paper at 50 yards with the first shot group - only about 4" off target with no pre-sighting at all!
Question:	Would this mount be strong enough for use with a shotgun
Answer:	The rings that come with this scope will not securely attach to the dovetail on either a Marlin XT-22 or a Marlin 795. There is a lot of the scope creep. For the XT-22 I bought weaver scope bases, for the Marlin 795 I ended up buying a UTG air rifle base with integral rings. The scope is great, the rings that come with it are subpar though.
Question:	What is the height from top of rail to bottom of ring
Answer:	I have it mounted on my 10/22 takedown. Fits in the carrying case when mounted, but barely. Great scope for that rifle imo

• 6061 T6 Extruded Aluminum Construction
• Anodized Black
• Mil-Spec 1913 Picatinny Rails Upper Receiver
• 15 In-Lbs Screw Torque
• Standard Scope Mount Profile
• Included components: Scope mount, Torx screws

User questions & answers

Question:	Will this fit a hk
Answer:	XL
Question:	Will this work on a weaver rail
Answer:	M
Question:	Does this cowitness with a standard FSB
Answer:	Im 5'11", 204lbs, waist 36 and i had to get 2xl to fit me right. the shirt sleeves are short but i roll mine so it doesnt matter.
Question:	does the rail attachment screw thread into the aluminum
Answer:	That totally depends on the local environment. If you play in the desert you need camo with more tans and browns, in woods, more greens....

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• Lightweight 6061 grade aluminum construction
• All Monstrum Tactical optics mounts come with a lifetime guarantee

User questions & answers

Question:	Will this fit my panzer arms ar
Answer:	You can press fn and Q to turn off the backlights, press them again to turn on the backlights.
Question:	I lost my sight in my right eye and would like to shoot right handed with my left eye. What kind of an off-set system do you have that I can do this
Answer:	After you turn it on, backlights is just single color. You can press "fn" + Q or "fn" + lamb key on the right side of the space bar to open the rainbow color. If you want to change different rainbow colors, you can press "fn"+RGB to change different rainbow colors.
Question:	I see a comment below that says it is made of steel, not aliminium, which is it really
Answer:	Yes, these keys works well with original apps from Apple.
Question:	Will this work with a Nikon P
Answer:	There’s two little circles on the bottom corners that you rotate outwards and it’ll let your iPad come right out

Product features

Weighs in at a mere 9 ounces!

Crafted from 6061 Aircraft Grade Aluminum. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount.

Built specifically for 1 inch scopes.

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

The mount is 5.75 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.

Heavy Duty Lockdown

The 12 hardened steel torx bolts allow you torque down your scope mount to specifications without worrying about stripping the screws like competitors.

The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position.

Product description

This scope is well suited for wide range shooting, with high optical clarity magnification and a 50mm objective diameter. The scope andMulti Optical Coated reticles are illuminated in red or green and in multiple brightness intensities, for a suitable sight picture regardless of lighting or environment. The laser and sight allow for quick acquisition of close quarter and fast moving targets.

Hunting Scope Description

Obj. Diameter：50mm

Length：328mm

Brightness Control：Red and green with 5 levels

Reticle：Rangefinder

Field of View：10' ~ 27' @ 100yards

Eye Relief：3" ~ 3.4"

Windage & Elevation Click Value：1/4' @ 100 yards

Exit Pupil：3.3mm ~10mm

Red and Green Dot Sight Specification



Obj. Aperture：33 mm

Magnification：1X

Field of View(@100yds)：15.8m

Brightness Control：unlimited brightness control

Dot Color：Red and Green

Eye Relief：Unlimited

Rail:22

Weight: 290g

Length:82mm

Laser Wavelength: 650nm

Tube Diameter: 1.2''

Laser specification



Laser Class: IIIa

Standard 22 mm mount rail

Length: 29mm Maximum Output Power: ≤ 5 mw

Wavelength: 625~660nm

Tube Diameter: 26mm

Aluminum Construction Windage and elevation adjustable

Laser Distance:100m-200m(Green Laser:400m-500m )

Package Content



1* rifle scope with dual illuminated Rangefinder reticle

1* holographic sight

1*compact red laser sight

3* Allen keys for rail mounting and sight adjustment

1*Lens caps

1*Cleaning cloth

Battery included



Notice:Any items not sold by our xoping store may be fake item,we will not be responsible for this.

• Rifle scope advantage：High grade fully coated optical lens, Dry nitrogen filled with waterproof,shock proof,fog proof. Magnification：4x-16x suit for any W/ 22mm Rail Mount Picatinny Rail,Made of Aluminium with High grade fully coated optical lens,1200G shockproof and 100% waterproof & fogproof test would keeps the scope more solid makes you can shoot more,1/4" Fingertip Resettable Windage & Elevation adjustments provide a wide range adjustment.
• The scope is Red and green Multi-X reticles with 5 levels；Exit Pupil：3.3mm-10mm；Field of View：10' ~ 27' @ 100yards；Eye Relief：3" ~ 3.4"；Windage & Elevation Click Value：1/4' @ 100 yards;With 50mm Beautiful Flower Object Lens makes your scope become unique in Amazon.High grade fully coated optical lens, High quality matte black finish,Dry nitrogen filled with makes 100% waterproof,shock proof,fog proof.
• Fast Focus Eyepiece with 1/4" Fingertip Resettable Windage & Elevation Adjustments.Red laser Reaching Distance about 100-200m，Detachable Green laser sight with independent switch,Best Choice for Shooting-With Long Eye Relief:66.8-99.06mm，Field of View:13.41-40.38 @100yards,Exit Pupil:3.3mm-10mm.Wide Magnification 4X-16X provide you a big view at 200-1000YARDS.5 Levels Red and Green Illuminated adjustment brings a better view in dark environment.
• Three Parts with More Functions-Plus With Electric control red dot sight and green laser is good for quick acquisition of close quarter and fast moving targets.The distance is about 200-500m for the laser,When you are aiming at 300m that would save more time.The other side of this scope you can easily install the other equipment such as flashlight,which helps you more in dark hunting environment.
• Integrated rails offers ample space for accessories,Best Customer Service for Everyone.

User questions & answers

Question:	Where do the 3* AG13 batteries go
Answer:	There is a little round cap about the size of a small pea on the side. It unscrews and the three batteries slip in there. I found with mine, I stacked all three batteries together on the tip of my finger and turned the red dot on its side. I then raised the stack into the hole. Adding the batteries one at a time they would flip or turn sideways. Just stack them together on your finger and raise them all in as one.
Question:	How does the electronic brightness control operate? i purchased this scope, but don't know how that feature works. thanks
Answer:	the brightness of the scope is control by the button at the end of the scope
Question:	I've read, printed, and thoroughly compared all three models descriptions and features. the description and features seem to all be the same. so, which one is the newest model with the most and best features for my ar15 firing 5.56 nato ammunition. i only need to know which one to purchase, "green laser", "green laser
Answer:	Friend you can buy the model green laser
Question:	K I’m not getting what the price difference is on this scope? Descriptions say they’re all the same
Answer:	Friend the red dot and magnification is different

• Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing
• Lightweight one-piece scope mount for mounting standard 1 inch diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts

User questions & answers

Question:	Will this fit on a ruger american predator 6.5cr
Answer:	No
Question:	Will this work with a nikon p-223 3x9x40 scope
Answer:	They where gray for me
Question:	What is the torque specification for a Vortex Crossfire 2 1 inch tube
Answer:	I got .38s and they were Chocolate brown
Question:	Wil a Burris Droptine 4.5-14x42. (13-incher) fit into this
Answer:	No.

Product features

One size does not fit all.

That’s why we designed the Monstrum Extended Series Scope Mounts. The Monstrum Extended Series Scope Mounts are built specifically for long range scopes - 6-24x magnification scopes and above - with longer dimensions and larger adjustment housing. With wider spacing between the two scope rings, the Extended Series Scope Mounts can accommodate scopes with larger segments that will not fit into standard one piece scope mounts.

Hardened Steel Torx Hardware

The mount is built for standard 1 in tube scopes for mounting to any standard Picatinny rail equipped rifle.

The mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - holds zero against the toughest of recoil.

The mount frame is crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

Square Integral Recoil Stops

The Monstrum Extended Series Scope Mount are built from the same platform as our best-selling Slim Profile Series. The design remains light and minimalist. At a mere five ounces, the weight is comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount. The offset design provides an additional 2.00 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position.

• Fits low power variable optics with standard 30mm size tubes
• Compatible with M1913 Picatinny rail mounting platforms
• 2.52 inches of clearance between the rings, centers scope 1.5 inches above the rail and weighs 8.2 ounces
• Solid aluminum construction with a durable matte black anodized finish
• Covered by a 1 year warranty for defects due to materials or workmanship

User questions & answers

Question:	Will it fit my pa 4x14x44 ffp scope
Answer:	Not the first choice for a bolt action rifle. It will fit on any picatinny rail. The American Predator does come with that rail.
Question:	Where is the mount made
Answer:	Wrong Will not fit 223 Nikon- standard 1 inch tube Not snug fit as brackets too large allowing play. Returning
Question:	What is the scope ring screw torque specifications
Answer:	20-25 inch pounds for mount and 17 inch pound for rings. Use blue lock tight. Do not over tighten the rings, can damage scope.
Question:	Two questions: does this have pads inside the rings or can I lap the rings....Is this a good mount for vortex Strike eagle 1x6x
Answer:	I’m sorry I can’t answer your question. Mine was lost in transit and I had to take a refund. I was under the impression that they were out and they could not replace it.

Product features

Product Overview - PADLXSM (910058)

The Primary Arms Deluxe Scope Mount is ideal for 1913 Picatinny and similar “flat-top” mounting platforms. Aluminum construction, durable matte black anodized finish. 2.52 inches of clearance between the rings. Places the center of your 30mm tube scope 1.5 inches above the rail. Fits scopes with 30mm tubes.

To make sure the mounting nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, we recommend no more than 35-40 in-lbs.

Product description

Precision CNC machined from hardening 6061 aircraft grade aluminum. Enhanced one-piece construction mount for durability and stability. Fits any Picatinny system and any 1" optics sight. Provide a 2" Forward Extension for better eye relief. High-quality anodization, matte black finish. Includes Torx screws and Torx driver.

• 8 Torx fasteners for secure zero hold
• Precision CNC Machined from 6061 aircraft grade aluminum
• Fits any 1" Optics
• Durable matte black anodized finish
• Works with 1913 Picatinny mounting system
• High Profile
• T6061 aluminum alloy
• Rigorously field tested for performance

User questions & answers

Question:	I have the vortex crossfire II, the front bell is large and my current Vortex mount barely allows any clearance from the picatinny rail will this work
Answer:	Hello, That Deluxe mount will fit and function with your 4-14x44 scope no problem. I hope this answers your question, and please let me know if I may be of further assistance. Regards,
Question:	Will a 50 mm fit on a s&w mp15 with this mount
Answer:	Thank you for your question. This well-proven scope mount is engineered in Houston, Texas and constructed in the China to our engineers exacting standards.
Question:	I have a s&w m&p 15 sport with a raised fixed front post. will this mount get the cross hairs above the front sight post
Answer:	We recommend a 1/4 to 1/2 turn past resistance and using a thread locker like Blue Loctite to ensure a proper fit and prevent over stressing the hardware.
Question:	One place says it fits 1 inch scopes, another place says 30 mm? Also, how high from Picatinny rail to the bottom of scope tube
Answer:	This scope mount does not have pads inside the rings but you can lap them for a good fit. This is a good mount for a Low Power Variable Optic like the Vortex Strike Eagle 1-6x24mm.

Product features

CCOP USA 1" Cantilever Scope Mount

- Fits 25.4mm or 1" tube diameter scope.

- 2" Forward extension for better eye relief.

- High Profile.

- 38mm Saddle height.

Precision CNC Machining

- Constructed from harden T6 aircraft grade aluminum.

- High quality anodization.

- Matte black finish.

Hold Solid Zero

- Snug installs to any picatinny rail.

- Field tested for performance.

- Easy installation and removal.

• Precision Machined from Aircraft-grade Aluminum Alloy
• Robust and User Friendly Ergonomic Quick Detach Lever Fully Adjustable to Fit on Any Picatinny Rail
• Bidirectional Design to Offer Needed Offset in Diverse Applications
• Ring Top Picatinny Rail
• After installing the gasket, it can be used in the Scope of 25.4mm pipe diameter,After removing the gasket, it can be used in the Scope of 30mm pipe diameter.

User questions & answers

Question:	can you remove the bubble leveler
Answer:	No, not without breaking the bubble level
Question:	what is the measurement between rings , the inside measurement
Answer:	Not being sarcastic, measure the distance from the back of the front ring to the front of the back ring. But best to place your chosen sight on the bottom half of both rings and insure of the clearance of the sight controls of the scope. That's the best I can offer. I am not a gunsmith but have successfully mounted several scopes. Stay safe and good shooting.
Question:	Would these work on a savage a.17hmr
Answer:	If you have standard picatinny rail yes
Question:	Are these high, medium or low profile scope mounts? Thanks
Answer:	I'd say Medium, because of the distance between the top of Picatinny rail (on top of receiver) and the bottom of the rear bell(Ocular) end of my scope. I have the Ocular end mounted back to about even with the rear end of the Picatinny rail and it clears nicely using this mount. BUT, I'm using a Burris 1 to 4 power variable scope without a Target end bell that is pretty much designed for AR rifles. In my experience it is typically the radius of target end bell that will limit the size of the scope you will be able to mount. So take a peek at the Burris 1X4 AR scopes and their Ocular end radius in comparison and you can judge for yourself if your scope will work with this mount. I'd measure it but I'm away from home on a July 4th Holiday. Oh and I like these mounts as they are simple and inexpensive. A purist might lap the interior surfaces of the rings a wee bit. But they are just fine with me.

Product description

Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.

Built in Weaver style rails - very handy fitting scope sight optic lashlights and lasers etc.

Scope Mount with Qick Detach Locks for Picatinny Weaver Rail

Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.

Machined from aircraft grade aluminum for extreme strength

• Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.
• Built in Weaver style rails - very handy fitting scope sight optic lashlights and lasers etc.
• Scope Mount with Qick Detach Locks for Picatinny Weaver Rail
• Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
• Machined from aircraft grade aluminum for extreme strength

User questions & answers

Question:	With the position of scope rings 1" offset forward and mounted on a rail, which side are the quick detach locks are located
Answer:	I prefer the right side, because I am right handed. However, it is personal preference. The mount has one end that has more clearance then the other, from the top of the rail. That end can hover over a flip down iron sight. A friend of mine likes the end with more clearance towards the muzzle since his scope has so many adjustments, he feels it my give a more solid hold. I personally have had no issues with this mount and would purchase again. With a double lock mount, just make sure both lock downs are evenly tight for best zero in.
Question:	will this fit the picatinny rail of a Henry AR7 Survival rifle
Answer:	Only if the rail is a 20 mm size.
Question:	How much does it weigh
Answer:	10-12 ounces. Never weighed it. Definitely less than a pound
Question:	Does this have the peep sights holes? Thanks in advance
Answer:	Just the mount and scope rings no peep sight.

• Dual ring scope mount for Picatinny rail platforms for 1 inch tube diameter rifle scopes
• Hollow frame design weighs in at 5.7 ounces - 30% lighter than our previous generation scope mount models
• Two inches of forward offset for flexible scope positioning and optimum eye relief
• Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
• All Monstrum mounts and accessories come with a lifetime warranty

User questions & answers

Question:	How much offset is there on this mount side to side
Answer:	There is no side offset, it is centered.

Product features

Weighs in at a mere 5.7 ounces!

When you’ve got your guns and gear strapped to your back, every last once matters.

That’s why we've taken our best-selling line of lightweight scope mounts and made them even lighter! With a newly designed hollowed out 6061 grade aluminum frame, the Monstrum H-Series scope mounts shave precious ounces off your pack without sacrificing durability or performance.

Hardened Steel Torx Hardware

The scope mount uses hardened steel Torx mounting hardware to prevent stripping bolts and allow you to get a secure lockdown everytime.

Square Integral Recoil Stops

This scope mount also features 4 square-integral recoil stops, which allows us to shave down the weight, while increasing the strength.

Available for standard 1 inch diameter rifle scopes, it mounts securely to standard Picatinny rail platforms.

• Sport type: Hunting
• Made with pride in the USA.
• Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting.
• Package Weight: 0.268 kilograms

User questions & answers

Question:	Will this work for a ar10 using a vortex diamondback 6x24x
Answer:	Did this mount work for your scope? I just bought that exact scope for my T/C Ventire 270win and wanted to know if u cleared ur barrel? Thanks
Question:	Will this mount to a Lithgow LA-101 which uses a weaver mount
Answer:	The mount is very sturdy. I use it with a Nikon P-300 mounted on a 300BLK rifle. I've never had any problems. Make sure to use locktite on screws.
Question:	Will this work to use a sightmark latitude 10-40x60 f-class riflescope, black, sm13044ftr xk-rs-frcl-sm13044ftr on a ruger precision rifle
Answer:	I have the 1.5" version of this in top of an AR10 (similar mount) and it's too low to clear my 50mm objective crossfire. You want this one. I'll post again after I get it mounted, but I only need another .25" so I'm confident this will resolve my problem.
Question:	What are the pros / cons on having a cantilever or stand alone rings on a ruger precision rifle in 6.5cr
Answer:	Yes it will. Not sure why everyone else answering this question has to be a jerk. Best of luck with your setup! Make sure to learn to zero and calculate ballistics