13 best auger for beach umbrellas

• ✔ SAFELY KEEPS YOUR BEACH UMBRELLA FROM BLOWING AWAY - Our super sturdy sandgrabber spike is windproof, wind resistant and can with stand strong 50 MPH winds. No more harmful SPF or UV sun rays.
• ✔ BETTER THAN METAL - Metal anchors rust from the sand and salt of the ocean, get hot in the sun, and are sharp and dangerous. The product is built with sturdy ABS Plastic, that is stronger than metal and will last longer
• ✔ ONE SIZE FITS ALL - The universal base fits all umbrella pole sizes. Compatible with all brands. Lightweight, portable and compact. Easily fits into travel accessories bag.
• ✔ EASY SET UP IN JUST SECONDS - Safely twists, stakes and mounts in the earth. Simply screw the auger into sand, dirt or grass, place your umbrella in the base holder, tilt accordingly, and relax in your chair.
• ✔ REPLACEMENT GUARANTEE + FREE BONUS GUIDE - Happily comes with our free installation guide showing you how to use the anchor with a full replacement warranty if any parts break!

User questions & answers

Question:	what is dimention of locking nut? have lost original
Answer:	If you are referring to the screw used at the top to tighten the umbrella in place, I believe this is a custom piece. The dimension of threads are as follows: 19/32" OD without thread, 5/8 with thread, screw length ~1.25" (note addition .5 in goes inside the handle. Threads are square cut. Thread depth ~1/32". ~ 8 TPI. Dimensions of handle portion: 1.75in diameter, 1 in length. Thank you. Regards, Ana-Customer Service
Question:	So how is ABS plastic stronger than metal as it says in the description
Answer:	I'm not calling it stronger, but I am calling it more suitable for the application. ABS is very durable, and has more "give" than a steel one. Therefore, if you have your umbrella anchored in an odd angle, rather than putting a dent in the metal version, this would spring back. Also, ABS won't rust like a steel one would after a season at the beach.
Question:	They say "full replacement warranty if any parts break!". Is there a time limit on this? I read 30 days which isn't much of a time frame
Answer:	Hi there! Amazon provides a full refund on any order for 30 days. No questions asked. As the owner of Beachr, we are happy to replace your product if anything breaks within the next year.
Question:	will this hold a 1.5 inch diameter pole
Answer:	I measured the inside diameter of the Beachr and it is exactly 1 1/2 inches. Your pole would most likely fit tightly but you wouldn't be able to tighten the screw very much. My umbrella pole is 1 inch in diameter so there is more room to tighten the screw to the pole. Hope this helps somewhat.

• ⛱ Wind resistant: Wind resistant with ability to withstand strong 50 MPH winds
• ⛱ 5-tier screwe design: Compared to others with only 3-tier, this 5-tier screw design provides more stability and can withstand heavier wind. Safely keeps your umbrella from blowing away
• ⛱ One size fits all: Universal base to fit all umbrella brands and pole sizes of up to 1.6” inches. Compatible with Tommy Bahama, Coleman, Nautica & Rio brands
• ⛱ Set up in seconds: Simply screw the auger into the sand, dirt or grass, place your umbrella in the base holder, tilt accordingly, and enjoy
• ⛱ Strong & high quality: Built with sturdy 0.16” ABS construction, stronger than metal and will last longer. No cracking and rust

User questions & answers

Question:	Is there a side screw that will tighten up and hold smaller poles in place. Or is it just an open slot to side pole into up to
Answer:	Thanks for the question. Yes, it comes with side screw.
Question:	Where is this product made
Answer:	Contact Us JGR Copa: Always fun in the Sun! https://www.jgrcopa.com/content/contact-us Contact Us JGR Copa is a leading manufacturer of beach, pool and outdoor accessories such as: beach chairs, beach towels, umbrellas and much more.
Question:	will this hold an umbrella with a 1 1/2 inch diameter pole
Answer:	Thanks for the question. Please be advised that the anchor has a universal base to fit all umbrella brands and pole sizes of up to 1.6" inches.
Question:	Do u have to purchase the sand anchor also
Answer:	Nope. Just place the post of your umbrella in the cork screw. However, after several FAILED beach endeavors, this screw type post holder does not engage in the sand. I turn & turn & turn and turn the cork screw does not enter the sand. I would not buy this style. Find something else.

Product features

Ohuhu Beach Umbrella Sand Anchor Stand Holder with 5-Tier Screw, One Size Fits All

Ohuhu's Universal Beach Umbrella Anchor is virtually unbreakable! Constructed with 0.16" ABS construction, it's made to withstand heavy pressure and wind and built to last. Made with high quality material that prevents cracking and rusting. The anchor has a universal base to fit all umbrella brands and pole sizes of up to 1.6" inches. To set up, simply screw the auger into the sand, dirt or grass and place your umbrella in the base holder. This umbrella anchor is heavy duty yet lightweight.

Specifications:

• Material: ABS
• Product Weight: 0.57lb/ 258g
• Package Dimension:16.7" x 9.7"x 3.4"/425*245*85mm

ONE SIZE FITS ALL

Adjustable thumb screw , fits most umbrella pole sizes

STURDY STRUCTURE

Made of high quality and strong ABS plastic, which stronger than metal and will last longer.

5-TIER SCREWED DESIGN

More tier screw, more stable

Keep your umbrella in place even on windy beach

• Build to last: Made of heavy duty steel, with glossy black painted finish. The auger drill bit point on it hits the ground first and keeps it steady when you are digging hard grounds. Our patented design also makes the distance between the digging blade start and the point is the minimal, so auger drill bit will start working on hard ground without having to push down.
• Size: 0.3 inch (8mm) steel shaft with non-slip hex drive 0.3inch(8mm); 1.8-inch (4.6cm) diameter x 14.6-inch (37cm) length.Quickly digs holes up to 14.6 inches deep and 1.8 inches wide using the power of your hand held drill. A professional landscapers’ choice for dramatically increasing efficiency when planting bulbs, potted plants, vegetables, flowers, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes; Effortlessly dig post holes.
• Save your time & Easy to use: our earth drill bit will Work with MOST 3/8" or larger chucked drill, we recommend using electric drill with ADJUSTABLE DRILL MOUTH, so you will never worry about if auger fit. 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes.For cordless drills a minimum 14V drill is recommended; Keep auger clean from soil and debris when not in use. for tulips, iris, bulbs, bedding plants, and seedlings. Also great for digging weeds up by the roots.
• Multi-Purposes: our spiral hole drill is the best landscapers’ choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes; Our earth drill bit is also effortlessly dig post holes or even bring it on vacation to drill a hole in sand to anchor your beach umbrella.It will be a good helper for you.
• Improve your work efficiency: Our bedding plants drill bit will make hundreds of holes in few minutes, it will save your time & save yor back. A Life Saver for you！

User questions & answers

Question:	Are there any functional differences between the color choices
Answer:	The photo (and the product) are molded with 2l/h meaning 2 liters per hour. This works out to very slightly more than 1/2 gph.
Question:	What are the 2 yellow tools that come with it like in one pic? I got them
Answer:	I've never seen a 1/4" tee that will fit in the 1/2" poly tube. The couplers that go into the 1/2" poly tube have a type of flange in the center that keeps them from going too deep into the tube so they maintain their seal around the barb. I've also never seen any 1/4" "leak line" whatever that is. The solution is to use a coupler for the poly tube, a short piece of 1/4" tubing, a tee in that, then as many tees and drippers as you need to get the amount of water you want where you want it. Just because I've never seen a 1/4" "leak line" doesn't mean that no one makes it. All the 1/4" fittings are available at your local home improvement stores that sell the Mr. Landscaper brand drip systems.
Question:	auger or 2? in general page it states "2 pack" but when in the item's page it only talks about one ....? thanks
Answer:	The attached barb is a "Bonus Barb". If for some reason you need a barb for the 1/4 inch drip line associated with the piece in question you have it. I find those extra "Barbs" provided are not strong enough to be used in my drip systems so i just leave them on the emitter incase of a major "My Kingdom for a hose barb Moment". Otherwise these emitters can be used successfully.
Question:	Where can I get more of these same plant labels
Answer:	This item is the barb emitter only. We do offer the dripper with stake however due to COVID 19 our resupply has been slowed. We should have the stakes back in stock in a week or so if all goes well. Our apologies for the delay.

Product features

Auger Drill Bit 1.8"x14.6" Garden Plant Flower Bulb Auger Rapid Planter Bulb Bedding Plant Earth Auger Drill Fence Post Umbrella Hole Digger

• - High strength steel material and superior craftsmanship for quick and clean earth hole drilling

• - Multi-functional hole digger drill bit for fence posts, decks, planting trees, ice fishing holes and more

• - Replacement garden drill digger auger makes light work of large scale planting and save you from back strain

• - Extra strong and durable auger spiral drill bit easily fits any standard drill to ensure maximum digging performance

The Auger Drill for Planting Fit Any Cordless Drill and Electric Hammer with Adjustable Drill Chuck

• Our bulb planter tool will help eliminate constantly bending over while drilling

• No need to worry about hard landscapes, because this rapid planter drills through loose, hard material so you can plant bulbs and bedding plants anywhere you want

• Not for using with large or solid rock

• Please use electric drill 18V or larger

Heavy Duty Planter Auger Spiral Drill Bit - Great Garden Hand Tool for Planting Seedlings and Bulbs

• We are professional manufacturer of Earth Augers, we produced hundreds of different sizes augers. Please visit our store to choose the auger you want, they will help you do garden work in a quick way, or drill holes for various purposes.

Product description

An Ideal Earth Auger Drill Bit

Multipurpose Earth Auger

- Ideal for digging holes in the ground to plant bulbs and plant tree saplings in your garden.

- Excellent for planting umbrellas or posts and also can be used to till soil, mix seed, soil, and fertilizer.

- Mixes batches of mortar mix or paint with ease.

- Simplifies drilling tasks such as taking soil samples, boring plant holes or erecting fences.

Convenient Earth Auger Bit

- Designed to help you to easily dig to deeper depths.

- Built to penetrate the ground quickly and are particularly well'suited for tough soils.

- Hexagonal shank / shaft offers a secure grip and doesn't "spin".

Compatible Earth Auger Bit

- Designed for use with the any standard electric or cordless drill with universal chuck / jaws.

- Delivers maximum power without any twisting and jerking.

GrayBunny Quality

- 24 inches (61 cm) long, 8 mm diameter hexagonal metal shank/shaft with 1.75 inch (4.5 cm) wide helix for maximum holding power

- Heavy duty and long lasting even under the toughest conditions.

- If you'd like your money back at any time within 90 days of your purchase, no worries. Just ask.

Click the "Add to Cart" button on top to enhance your outdoor living space now!

• MULTI-PURPOSE: The GrayBunny earth auger bit is ideal for digging holes in the ground to plant bulbs and tree saplings in your garden. Simplifies drilling tasks such as planting umbrellas or posts, termite bait stations, taking soil samples, boring plant holes or erecting fences. Also works great for mixing tasks like tilling soil, mixing seed with soil and fertilizer, and mixing batches of mortar mix or paint.
• PREMIUM QUALITY: 24 inches (61 cm) long, 8 mm diameter hexagonal metal shank/shaft with 1.75 inch (4.5 cm) wide helix for maximum holding power. Heavy duty and long lasting even under the toughest conditions.
• CONVENIENT: Designed to help you to easily dig to deeper depths. Built to penetrate the ground quickly and well-suited for tough soils. Digging becomes an easy task. Hexagonal shank / shaft offers a secure grip and doesn't "spin".
• COMPATIBLE: Designed for use with the any standard electric or cordless drill with universal chuck / jaws. Delivers maximum power without any twisting and jerking.
• GrayBunny offers premium products for your home and garden while exceeding highest industry standards and offering impeccable customer care. If you'd like your money at any time within 90 days of purchase, just ask. Click the "Add to cart" button on the above right to enhance your outdoor living space now!

User questions & answers

Question:	Could this drill through ice? Looking to drill a small hole for a pump to flood a rink
Answer:	The short answer is I don't know. Would I try it if I already had the auger? Probably. Do I think it would work? Probably. How thick is the ice? If you run into resistance, consider a pilot hole with a more traditional bit. What's the worst that could happen? Personally, having lived on very cold country for some years, I would try it.
Question:	Are there earth augers that will create a 1" diameter hole
Answer:	Yes
Question:	What is the length of the flutes (not total length
Answer:	The flutes are about 16 3/4 inches long, not including the tip which is about 1 1/2 inches long.
Question:	Mixe reviews on the diameter below. Is it in fact 1.75" as described or 1.5" commented by a few reviewers? my application is critical of this size
Answer:	1.5 inch

Product description

Sandy Dunes Beach Umbrella Sand Anchor with Universal Fit

Sandy Dunes' one-size-fits-all sand anchor is a super strong mount that can hold beach umbrellas of any size, in the toughest wind conditions.

Its ABS construction comes with many advantages over the metal sand anchors:

• Virtually Unbreakable - Its strong material and production will ensure it will stay in one piece while withstanding tough weather and mounting it in dense soil
  
  
• Lightweight - ABS is much lighter than metal and makes it easy to carry with you anywhere
  
  
• Safe - Forget about rust and sharp edges
  
  

At Sandy Dunes, we designed the most convenient beach umbrella anchor, with our customers in mind. You'll get the best quality sand anchor found anywhere, and it will most likely be the last one you'll need to purchase. Here is why:

• We reinforced all areas that turned out to cause flaws and break in other brands' sand anchors.
• We designed the handle grips to be ergonomic, while extending them to apply additional leverage that makes installation simple and quick - within seconds.
• We researched all popular beach umbrellas poles sizes and made the pole area diameter adjustable up to 1.6 inches. This ensures we provide the best fit for all umbrellas, while reducing size to be the most compact.

People from all around the world enjoy Sandy Dunes' Beach Umbrella Anchor

• ⭐️ DURABLE MATERIAL - Constructed of solid ABS, the sand grabber withstands strong winds and helps keep you protected from UV rays in any condition.
• ⭐️ ONE SIZE FITS ALL - The sand anchor’s base is designed to match beach umbrella poles of all sorts. The pole adjustment screw helps you match the size of your beach umbrella to easily secure it in place.
• ⭐️ QUICK & EASY SETUP - its screw-like design and wide handles, enable you to easily mount the anchor in the ground, insert your umbrella, tighten the adjustment bolt and enjoy the beach within seconds.
• ⭐️ HIGH QUALITY & MAXIMUM SAFETY - This sand anchor will last a very long time due to its ABS build and safety-driven design. It is stronger and safer than the sharp metal anchors which rust over time and can be dangerous.
• ⭐️ TOTAL CONVENIENCE - Portable, lightweight and compact, it can be easily placed in your beach bag or backpack, bringing the shade with you no matter where you go.

User questions & answers

Question:	Will this work for sportbrella
Answer:	I'm not quite certain what sportbrella is, but umbrellas with any number of diameters to their poles will work. Near the top of this piece is a screw that adjusts in or out to tighten in any size pole.

Product description

Specifications:

Material: ABS

Product Weight: 0.57lb/258g

Package Dimension: 16.7" x 9.7"x 3.4"/425*245*85mm

Package included: 1 x umbrella stand

 

Unique Features:

1、Adjustable thumb screw,fits most umbrella pole sizes (from 0.98" (25mm) to 1.26" (32mm)diameter)

2、Reinforced handles, morestronger;

3、More tier screw, morestable, keep your umbrella in place even on windy beach;

4、Installs without tools.Drill into sand or soft ground by turning the handles.

• 1.【Strong Wind Resistant】-- Built with sturdy 0.16” ABS construction in order to withstand strong 50 MPH winds; No cracking and rust free. Perfect for beach sand, hotels, resorts, vacation homes, beach stores and cottages;
• 2.【Upgrade 5-Spiral Design】-- Compared to others with only 3- Spiral, 5-Spiral design provides more stability as well as can withstand heavier wind. Safely keeps your umbrella from blowing away;
• 3.【Universal Size Fits All Umbrellas】-- Universal base to fit all umbrella pole sizes of up to 1.6” inches, compatible with all brands; Fit in beach, lawn, yard, patio and garden to enjoy the comfortable wind;
• 4.【Easy To Install】-- Easily to screw the beach umbrella sand anchor in the sand, lawn, yard, patio and garden, install your umbrella also well easily with the thumbscrew tightening mechanism;
• 5.【Portable & Convenient】-- Lightweight and compact, it can be easily placed in your beach bag or backpack; Just ensure you have it the next time you visit the beach, camping site or water park.

User questions & answers

Question:	is the thumb drew system strong enough to hold the umbrella from coming out of the anchor
Answer:	It seemed to hold quite well for us. The day was not terribly windy, however.
Question:	How deep is the center hollow that holds the actual umbrella pole
Answer:	Hollow all the way to the bottom.
Question:	What is this auger made out of
Answer:	It is made out of plastic, so you have no worry about rust.
Question:	hate when this happens! Photo says 2 inch...elsewhere says "up to 1.6” inches". Which is it
Answer:	Up to 1.6 inch is the accurate answer.

Product description

Jisco JL24 Earth Auger, 1-3/4-Inch by 24-Inch Length

• Earth auger
• Made of strong steel
• It is easy, quick, clean professional way to deep root feeding
• Fits any 3/8in. or 1/2in. electric or cordless drill
• Measures 1-3/4-Inch diameter by 24-inch length

User questions & answers

Question:	Will this work on a tree stump
Answer:	It is designed for dirt, if the tree stump is rotting and the texture of dirt it should work just fine, if on the other hand need to drill holes in the wood of the tree stump, you need a sharp wood cutting drill bit, they look like this one except the tip usually has a little screw, and the twists of the auger start out with a sharp cutting edge, and the remaining twists are very hard and rigid. These augers are just twisted sheet metal, welded to a shaft, that is flattened on the end to break up the dirt/sand.
Question:	what is "Fits any 3-inch by 8-inch or 1-inch by 2-inch electric or cordless drill
Answer:	I think it means 3/8" or 1/2" drive drill. It would fit basically any drill. The end inserted into the drill is about the same size as your standard sized drill bits.
Question:	I need to drill holes to kill fire ants. need to get treatment deep into the mound. would like advice from auger owners
Answer:	As compared to most This auger drills a small hole deep in a short time. Which is what I would want if standing in an ant pile
Question:	I need to drill a hole to bury my kids dead hamster. Will it work for that
Answer:	What the hell is wrong withe you? 🐹 lives matter! I cant believe you want to kill your kids hamster and Barry his ass with 20v Dewalt auger! When I killed my kids hamster I just smacked it with a hammer and fed it to his dog! #FREE

Product description

Planting and landscaping can be a guessing game and back-breaking hard work, but the 7Penn Garden Plant Flower Bulb Auger 2” x 24” Inch Rapid Planter – Post or Umbrella Hole Digger for 3/8” Hex Drive Drill makes the process simple. Use a 3/8-inch 18V or greater drill on a slow speed to drill into your landscape and lift the rapid planter out of the created hole. It has a generous length that eliminates constantly bending over while drilling, and this rapid planter will even drill through loose, rocky material so you can plant bulbs and bedding plants anywhere you want. The steel shaft with a glossy black painted finish and non-slip hex drive, 2-inch diameter, and 24-inch length (12-inch flighting) make this planter perfect for planting, tiling, and mixing. Drill not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• PLANT MORE IN LESS TIME: The 7Penn Garden Plant Flower Bulb Auger 2” x 24” Inch Rapid Planter – Post or Umbrella Hole Digger for 3/8” Hex Drive Drill takes out all of the guesswork in planting bulbs; Simply drill as far as the auger will go and lift the auger out of the hole – it is that simple! Drill required, not included
• SAVE YOUR BACK: Has a generous 24-inch (61cm) length that eliminates constantly bending over while drilling; No need to worry about rocky landscapes, because this rapid planter drills through loose, rocky material so you can plant bulbs and bedding plants anywhere you want; Not for use with large or solid rock
• VARIOUS APPLICATIONS: This rapid planter is the professional landscapers’ choice for dramatically increasing efficiency when planting bulbs, 2-inch (5.1cm) potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes; Effortlessly dig post holes or even bring it on vacation to drill a hole in sand to anchor your beach umbrella
• EASY TO USE: Use a 3/8-inch or larger drill on low (slow) speed, drill into soil or applicable landscape straight down 24 inches, and lift out of hole; 18V or greater drill recommended; For cordless drills a 14V drill minimum is recommended; Keep auger clean from soil and debris when not in use
• BUILT TO LAST: 3/8-inch (1cm) steel shaft with non-slip hex drive; 2-inch (5.1cm) diameter x 24-inch (61cm) length; 12 inches (30.5cm) of durable 10-gauge flighting on a heavy duty 3/8-inch steel shaft with glossy black painted finish

User questions & answers

Question:	Does this work well in hard untilled soil, like clay
Answer:	I have used it in hard clay and as long as your drill is powerful enough it is not a problem. There is a hex shaft that fits in the drill so it doesn't slip.
Question:	Can this auger be used at the beach for umbrellas
Answer:	Since it does not have screw at end it cannot pull down well in solid soil. With sand, if you lean into it and with the help of the auger threads it would work just fine.
Question:	can this 2" x 24" augur be used to mix paint and mortar
Answer:	Keep in mind this is an Auger and rotates up. I'm afraid with the design it would auger up your paint and or mortar. You would be wearing more of what you are mixing than what's in the container your using I would not recommend mixing paint and or mortar
Question:	How does this garden auger do in a harder soil
Answer:	This is a great little tool for loose or medium soil, and it will work in typically hard-packed top soil, but I wouldn't use it in hard dry clay without a really powerful drill. There is a lot of torque involved, so in either case, be absolutely sure to use extra handle on your drill and hold on tight or you risk a sprained wrist or broken finger if it should hang up. In fact, DO NOT use this thing with just the drill, of any size, without that handle.

Product features

7Penn Garden Plant Flower Bulb Auger

Planting and landscaping can be a guessing game and back-breaking hard work, but the 7Penn Garden Plant Flower Bulb Auger 2” x 24” Inch Rapid Planter – Post or Umbrella Hole Digger for 3/8” Hex Drive Drill makes the process simple.

A Closer Look

It has a generous length that eliminates constantly bending over while drilling, and this rapid planter will even drill through loose, rocky material so you can plant bulbs and bedding plants anywhere you want.

PERFECT FOR YOUR DRILL

Use a 3/8-inch 18V or greater drill on a slow speed to drill into your landscape and lift the bulb auger out of the created hole.

Product description

Impact Canopy Umbrella, Sand Anchor

This Impact Canopy brand umbrella protects you from the scorching sun, blowing sand and more whether at the playing at the beach or lounging by the pool.

Features:

• Extra-large 8' diameter rainbow umbrella top with Vented on umbrella top enables air flow
• 1 1/4” rust-free, lightweight aluminum pole with spike tip
• Extra strong 16 fiberglass support ribs
• UPF 50+ UV protection filters 98% of the sun's harmful rays
• Tilt to block out the sun or blowing sand
• Teflon coated weatherproof cover with vented top
• Carry Bag with convenient shoulder strap
• Weight 9 lbs.

• PORTABLE: Lightweight 8 foot aluminum beach umbrella folds down for easy transportation in the included carry bag with shoulder strap
• HEAVY DUTY: Sturdy sand anchor keeps the umbrella secure in the ground, while the windproof vented top prevents it from turning inside out
• EFFECTIVE SHADE: Large umbrella with UPF 50+ UV protection filters out 98% of harmful UV radiation rays. Adjustable tilt to angle for maximum coverage from the blazing sun
• SPECIFICATIONS: 8' diameter rainbow umbrella, 1 1/4" rust free lightweight aluminum pole stand, 16 extra strong fiberglass support ribs, sand anchor auger tip
• IMPROVED: Push button locking mechanism has been re-fitted to ensure a solid and secure deployment of the umbrella

User questions & answers

Question:	So some the auger is riveted on and one says it is plastic and comes off. Which is it? I want it to come off so don't have to turn whole umbrella
Answer:	You don't have to turn the whole umbrella. The umbrella's pole comes apart. The auger is attached to the bottom half of the pole, and there is a small metal rod that fits thru two holes toward the top of the pole that you use as a handle. You "screw" this part of the pole into the sand and then attach the umbrella with the upper half of the pole. We used ours last summer -- it's really very convenient and sturdy.
Question:	what is the material
Answer:	200 denier polyester top and aluminum pole.
Question:	how many ribs/panels
Answer:	As in the description, there are 16 fiberglass ribs. The fabric is stronger than most umbrellas I have seen and it is 8' which is a great size. We love it and highly recommend
Question:	Is the height adjustable? What are the different possible heights
Answer:	To the best of my knowledge, no. Virtually all these umbrellas have one height but can be tilted (as shown) to various angles to compensate for the breeze/wind. We have always used umbrellas with more than 8 struts...they are sturdier & last longer. This one is very similar to our previous ones & they all worked well. Note: you always need a deep anchor to secure them in the sand. The short ones don't work for long.

Product features

8 Foot Beach Umbrella

Protect yourself from the scorching sun, blowing sand and other elements by relaxing under our extra-large 8-foot beach umbrella. The 8" auger tip keeps the umbrella securely in place and the adjustable anodized aluminum pole is easily tilted into the position for maximum protection against the moving sun. The Teflon coated polyester cover features a vented canopy for better air flow resulting in a cooler feeling temperature. Keep yourself cool under our beach umbrella.

Sun Protection

Colorful beach umbrella protects against the sun, wind, blowing sand and other elements. The umbrella is UPF 50+ UV treated and the perfect accessory for any outdoor event including the beach, outdoor parties, and ball games.

Double Vented Top

Double vented top allows for air flow to keep you feeling cool in hot temperatures. Adjustable metal tilt lets you angle the umbrella to follow the sun for maximum protection as the day goes on.

Auger Tip

8" auger tip securely anchors the umbrella down with just a few twists. The extra strong 16 fiberglass support ribs provide enhanced durability and extended protection.

• ☂ 100% UV PROTECTION: Made of sun protection fabrics with PA coating, MOVTOTOP beach umbrella protects your skin against UV rays and the heat of the sun. No need to worry about sunburn and enjoy a cool shade!
• ☂ STURDY AND STABLE FRAME: Strong 8 fiberglass support ribs and solid aluminum poles of our beach umbrella can resist strong sea breeze and will not be deformed. With the top vent promotes air flow, our windproof beach umbrella with sand anchor has more excellent stability in wind.
• ☂ ADJUSTABLE DESIGN: Thanks to the tilting mechanism, you can adjust the outdoor umbrella into different angles to block sunlight from the moving sun effortlessly. You can enjoy coolness shade from sunrise to sunset without moving the umbrella.
• ☂ LIGHTWEIGHT AND PORTABLE: MOVTOTOP 4.84lbs portable beach umbrella is made of aluminum alloy different from others’ umbrellas which are made of iron. It has same hardness but more light weight. You can take it anywhere without burden with a carry bag.
• ☂MOVTOTOP beach umbrella makes your short beach trip more interesting, it is a great choice when you want to relax in summer. If you feel you are unsatisfied with our Beach umbrella, please feel free to contact us via e-mail. We do offer you a good solution quickly.

User questions & answers

Question:	Can I go out the beach with my baby?My husband is at work
Answer:	Depends on a number of things...how do you plan to carry everything. We have a wonder wheels, so with that and a baby carrier I could easily manage by myself. As for sun protection, this is a great umbrella, but for a baby I recommend a tent with sides to help block the reflective sun. Take it from someone who made that mistake one time. I kept my baby under an umbrella the entire time and he still got a little burnt from the sun reflecting off the sand. We have a small tent that “pops” up and then twists back into a circle for storage, and use this umbrella primarily for the adults.
Question:	Does the umbrella have UV protection
Answer:	Works great. It has survived a hot California summer.
Question:	Does the umbrella have protection from the ultra violet rays
Answer:	Yes, the canopy with PA coating can block sun rays. and the sun protection index ups to UV 50+.
Question:	It says it has a sand anchor attached, but will it fit into a sand anchor purchased separately
Answer:	Ours fit into out separate sand anchor perfectly with no issues. The sand anchor attached is limited in value as it is very difficult to spin Into the sand.

Product features

Summer comes! Have fun on the beach!

MOVTOTOP beach umbrellas are perfect choices for your seaside leisure time, protect your skin from sunburn in strong sea breeze. Just enjoy a fantastic time on the beach with family and friends.

Protect against from UV rays

With sun protection fabrics with PA coating, MOVTOTOP UV 50+ Protection beach umbrella completely blocks UV rays and saves half bottle of sunscreen for you.

Air-vent design

Because the top vent of MOVTOTOP beach umbrella promotes air flow, you don’t need to worry about that the umbrella will be blown down. The only thing you need to do is lie down and enjoy it when sea breeze blows.

Twist handle and big screw ending

Using Twist handle and big screw ending, You can easy to insert beach umbrellas deep into sand without suffering hand pain caused by twisting the pole directly. And The twist handle also can be use to hang your bags or other things.

Product description

Product Features:

Ammsun Plastic Beach Umbrella Sand Anchor

Fits beach umbrella poles from 0.87" (22mm) to 1.5" (38mm) diameter

Sand anchor stops umbrellas from blowing away

Accomodates beach umbrellas using thumbscrew tightening

Installs without tools. Drill into sand or soft ground by turning the handles

Dimensions: 6.89"*2.95"*12" , Weighs: 10.2 oz

The handles are large and comfortable, so it's easy to get good leverage to put this in the sand. The auger is large and thick, so no worries about it breaking or not holding,

this thing is rugged. You can use it with a pretty big umbrella, and as stated, it worked flawlessly. The tension screw is also large and durable making it easy to get a good hold to really tighten it up



Package Including:

1x sand anchor



Attention:

1) All dimensions are measured by hand, there may be 0.4"-0.8" deviations.

2) Due to the light and computer monitor vary, the color may be slightly different from our pictures.



You can directly contact us, when you meet with quality problems.

• THE HEAVY DUTY AMMSUN BEACH UMBRELLA SAND ANCHOR - Made out of extra-tough plastic in order for it to be wind resistant. The Beach umbrella sand anchor does a terrific job when it comes to resisting strong gusts of wind. The Anchor maintains the umbrella erect, preventing it from blowing away with the wind. Now you can enjoy time with your family at the beach instead of continuously fixing a falling beach umbrella.
• ONE SIZE FITS ALL - The universal base fits all umbrella pole sizes. Compatible withAMMSUN, Tommy Bahama, Coleman, Nautica & Rio brands. Lightweight, portable and compact. Easily to fit into travel accessories bag or kit.
• THE EASY TO SCREW AND TWIST IN THE SAND, AMMSUN BEACH UMBRELLA SAND ANCHOR -The 12" umbrella sand anchor's spring like screw, makes it very easy to screw in the sand, Now you can install your umbrella quicker than any other sand anchors, avoiding the issue of having your family and children to stand under the sun for too long upon your arrival to the beach.
• THE STRONG GRIP OF THE AMMSUN BEACH UMBRELLA SAND ANCHOR- The 12" plastic screw like spring ensures stability for your umbrella and a deeper dig, so you can enjoy your time at the beach especially when the afternoon winds start to pick up, allowing you to enjoy the nice shade and cool breeze for the whole day

User questions & answers

Question:	need a plastic set screw
Answer:	yes
Question:	whats the diameter of the hole
Answer:	Can be inserted umbrella with up to 1.5" diameter poles
Question:	What are the dimensions of this umbrella anchor? How much does it weigh? Will it fit in a suitcase
Answer:	The total height from bottom of umbrella sand anchor to top of vertical pole is 14.9”,This beach umbrella anchor unit is 9.1” wide.Can be put in your suitcase. The weight of this umbrella anchor is 9 oz.
Question:	What is the Outside diameter of the holder
Answer:	The Outside diameter of the holder is 1.8 inch

Product features

AMMSUN Beach Umbrella Stand - Sports Umbrella Holder - Fishing Pole Stand - Beach Umbrella Stake with two color White or Blue

This umbrella stand can be easily pushed into the sand and create instant shade by using a vertical pole holder for your umbrellas with this in ground umbrella stand for ultimate sun protection!

EASY TO USE:

Simply screw the auger into sand, dirt or grass, place your umbrella in the base holder. Accomodates beach umbrellas using thumbscrew tightening. Installs without tools, and also work great at grass.

Product description

Fun Stuff Unisex 16" LARGE UMBRELLA ANCHOR, Green, OS

• Fun Stuff Unisex 16" LARGE UMBRELLA ANCHOR, Green, OS

User questions & answers

Question:	How deep does the umbrella pole go into the anchor sand screw
Answer:	Is about a foot long. So if you are strong enough you get sink it all the way

Product description

This 7 foot Tommy Bahama Beach Umbrella has an aluminum pole with fiberglass ribs. *Caution: Always use sunscreen lotion rated SPF 15 or higher in addition to using an umbrella. Monitor children regularly for sunburn. Sunlight does bounce off sand other reflective surfaces, so some amount of sunlight will reach you even if you are under an umbrella.

• Aluminum pole with fiberglass ribs
• Vent located on the top increases its wind tolerance and stability in windy conditions
• Tilting Mechanism allows for easy adjusting to the moving sun
• Special aluminum undercoating protects against the sun's harmful rays
• Bottom pole is designed with a built in sand anchor for easy anchoring. Carrying Case Included.

User questions & answers

Question:	how long is the pole
Answer:	The poles did not attach into one another. They sent a replacement but the second pole didn’t fit either. I had to return the umbrella
Question:	What is the width of the pole
Answer:	About an inch to 1 1/2 inches
Question:	How to make it tilt
Answer:	There is a joint to adjust the angle on the shaft.
Question:	Is this umbrella strong enough to be screwed into grass for watching kids' soccer games
Answer:	No... the screw on the umbrella is ‘wide’ , meant to pull loose sand up and away as it anchors itself deeper. You’ll snap the plastic post if you try to force it into compact ground material. Better to get a canvas fold up chair that has a clamp on umbrella on the arm or back. Good luck... hope your team wins!