14 best micro power inverters

Product description

Description

This is a 1200W solar grid-connected inverter, inverter DC to AC 110V micro-inverter. IP65 waterproof rating, high performance MPPT function, reverse efficient power transmission technology and intelligent monitoring system, the inverter is safe, intelligent and easy to use.

Features

Waterproof - Waterproof rating IP65 to prevent rain from eroding the surface. Parallel connections minimize safety hazards and are safe enough.

MPPT Features - High performance and powerful MPPT (Maximum Power Point Tracking) algorithm to optimize solar panel power harvesting. Effectively capture and collect sunlight.

Inverter power transmission - uses reverse efficient power transmission technology. Additional power is transferred to the grid. Effective use of the electrical energy generated by the inverter.

Product Specifications

Product: Waterproof Solar Grid-Connected Inverter

Recommended input power: 1200W

Recommended PV modules: 4 * 300W / Vmp> 34V / Voc <50V

Maximum input DC voltage: 50V

Peak power tracking voltage: 25-40V

Working voltage range: 17-50V

Min/Max Startup Voltage: 22-50V

Maximum DC short-circuit current: 80A

Output power: 120V AC

Peak power output: 1200W

Rated output power: 1150W

Rated output current: 9.58A

Rated voltage range: 80-160V AC

Rated frequency range: 57-62.5 Hz

Maximum unit of each branch circuit: 3PCS (single phase) static

MPPT efficiency: 99.5%

Maximum output efficiency: 92%

Night power consumption: <50mW

Maximum package size: 47x34x12 cm (18.5x13.4x4.7 inches)

Gross weight: 3.93 kg (8.66 lbs)

Package Content

1 x 1200W grid-connected inverter

1 power converter

1 x 1.5 m power cord

1 set of mounting accessories

1 x Product Manual

• 【Waterproof】- IP65 waterproof class, effectively prevent rainwater from eroding the surface. Connected in parallel, minimizing safety hazards. High quality and safe enough.
• 【MPPT Function】- High performance powerful MPPT (maximum power point tracking) algorithm, optimize the power from the solar panels to collect. Capture and collect sunlight effectively.
• 【Reverse Power Transmission】- Adopts reverse efficient power transmission technology. Extra electricity is transmitted to the grid. Efficient use of the inverter to the power emitted.
• 【Intelligent Monitoring】- The inverter can collect real-time data with intelligent monitoring system, can be controlled start-up / shutdown / power regulation.
• 【User Serviceable】- Parallel installation, the micro inverter can be installed directly at a later stage without changing the previous configuration. It is simple whether installation or maintenance.

User questions & answers

Question:	Has anyone had problems from heat making them cut off to cool
Answer:	check output ...voltage...on the panels and stay within voltage limits on inverter...if panel is 12 volts, then times 3 is 36, which should be right input for this inverter ,,,,,but .the panel voltage always seems higher than panel posted voltage ...to my experience , because of ...no load? I have had several inverters fail ….due to maybe to close wattage limit, so probably keep wattage to half of limit on inverter...wish I had known
Question:	Do I need modem to setup or initialize the inverter
Answer:	it approved by CE FCC ROHS
Question:	Is it UL certified
Answer:	the warranty is 1 year. we design and test it according to ul1741 or ieee 1547 standard. but not apply such certificate.
Question:	Can i just use 2 300w panel and not
Answer:	to 1000W, you can connect with solar panel from 0-1200W, but the input voltage should be in the scope (20-50VDC). We recommend you to sue 4 PCS*250W(Vmp=30 or 36V） solar panel. regards, kenny

Product features

High Automation

The robust MPPT algorithm can automatically track the power points and increase the power generation by 25%. With a real-time monitoring system, it can help you monitor power generation efficiency and reduce workforce expenses.

Efficient Transmission

Efficient reverse power transmission technology. Power transmission rate up to 99.9%. All digital control and intelligent soft switch technology are adopted in the charging module.

Digital Control

The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform.

IP65 & Aluminum Material

Introducing IP65 waterproof appearance design and aluminum alloy material, it is safe and reliable. Multiple protection functions are provided to prolong service life.

Easy To Use

Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. It is simple, whether installation or maintenance.

Wide Usage

It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances.

110V Solar Grid Tie Micro Inverter

Efficiently turns sunlight into clean and green power. Our solar grid tie micro inverter employs MPPT technology, reverse power transmission, and digital control. It is designed to provide sufficient power to drive various household appliances. Moreover, it has a prolonged service life given its IP65 waterproof design and aluminum alloy structure.

Product description

851-0451 Xantrex Power InverterMobile power for RVs and boats. By plugging this versatile inverter into a 12 Volt lighter socket or by connecting directly to the battery, you can turn your vehicle into a mobile office, or have power to run entertainment electronics. By plugging this versatile inverter into a 12 Volt lighter socket or by connecting directly to the battery, you can turn your vehicle into a mobile office, or have power to run entertainment electronics like popular handheld games or TVs. In addition, Xantrex power inverters automatically sense low battery voltage so you never have to worry about a depleted battery. Ideal for damp and humid environments, the XPower 450 is specifically engineered to provide corrosion resistance and short-circuit protection.



Portable Power For AC Products Rated Up To 450 Watts Two GFCI Receptacles For Connecting Multiple Loads High Efficiency-Converts Virtually All The Battery's Available Power To AC Corrosion Resistance Overload And Over Temperature Shutdown. Over Voltage Protection Low Voltage Alarm. Low Voltage Cut-Out Limited 1 Year WarrantyInverts : 12 Volt DC To 115 Volt ACContinuous Output Power (W) : 360 WattPeak Output Power (W) : 700 WattEfficiency : 90 PercentNumber Of Outlets : 2Length (IN) : 8.38 InchWidth (IN) : 4.56 InchHeight (IN) : 2.58 InchRemote On/Off Capable : NoWith USB Port : NoWith Volt/Watt Meter : NoWith Short Circuit : NoWith Reverse Battery Protection : NoWith Thermal Protection : NoWith Battery Cables : NoWith Built-In Charger : No

• Portable power for AC products rated up to 450 watts
• Two GFCI receptacles for connecting multiple loads
• Mounting brackets for convenient installation
• High efficiency converts virtually all the battery's available power to AC
• Overload and over temperature shutdown

User questions & answers

Question:	Will this item work with a jeep
Answer:	No, the panel will produce power regardless if the grid is down or not. I have a grid tied system with a bi flow meter installed. Anytime the panels are producing more power than you use it will continue to feed the power to the grid.

• 【Waterproof】- IP65 waterproof class, effectively prevent rainwater from eroding the surface. Connected in parallel, minimizing safety hazards. High quality and safe enough
• 【MPPT Function】- High performance powerful MPPT (maximum power point tracking) algorithm, optimize the power from the solar panels to collect. Capture and collect sunlight effectively.
• 【Reverse Power Transmission】- Adopts reverse efficient power transmission technology. Extra electricity is transmitted to the grid. Efficient use of the inverter to the power emitted.
• 【Intelligent Monitoring】- The inverter can collect real-time data with intelligent monitoring system, can be controlled start-up / shutdown / power regulation
• 【User Serviceable】- Parallel installation, the micro inverter can be installed directly at a later stage without changing the previous configuration. It is simple whether installation or maintenance

User questions & answers

Question:	Does it have a warranty
Answer:	You have to look at your place of purchase. It can have 90 days, 6 months, 1 year, 25 year you have to request from place of purchase.
Question:	Can I connect to a 24v or 36v battery bank at night? Thank you
Answer:	These output only AC voltage.
Question:	can i use as stand alone unit without any communication hooked up
Answer:	Yes but you won't be able to monitor the output. I use a Kill-a-Watt to monitor mine.
Question:	Is it UL approved
Answer:	I do not believe so.

Product features

High Automation

The robust MPPT algorithm can automatically track the power points and increase the power generation by 25%. With a real-time monitoring system, it can help you monitor power generation efficiency and reduce workforce expenses.

Efficient Transmission

Efficient reverse power transmission technology. Power transmission rate up to 99.9%. All digital control and intelligent soft switch technology are adopted in the charging module.

Digital Control

The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform.

IP65 & Aluminum Material

Introducing IP65 waterproof appearance design and aluminum alloy material, it is safe and reliable. Multiple protection functions are provided to prolong service life.

Easy To Use

Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. It is simple, whether installation or maintenance.

Wide Usage

It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances.

Solar Grid Tie Micro Inverter 110V

Efficiently turns sunlight into clean and green power. Our solar grid tie micro inverter employs MPPT technology, reverse power transmission, and digital control. It is designed to provide sufficient power to drive various household appliances. Moreover, it has a prolonged service life given its IP65 waterproof design and aluminum alloy structure.

Product description

Specifications:

Item Type: Micro Inverter WVC-300 (Wireless)

Material: Aluminum Alloy

Size: 24*20*6cm/9.4*7.9*2.4inch

Maximum Input Power: 300Watt

Suitable Solar Panel: Power300W, Open Circuit Voltage36-50V0C

Solar Panel Open Circuit Voltage Range: 36-50V0C

Peak Power Voltage: 22-45V

Min and Max Starting Voltage: 22-50V

Max DC Short Circuit Current: 20A

Max AC Current:13A

Output Parameter: @120V9230V

Output Peak Power: 260Watt260Watt

Rated Output Power: 250Watt250Watt

Rated Output Current: 2.08A, 1.08A

Rated Voltage Range: 80-160VAC, 180-260VAC

Rated Frequency Range:47-52.5Hz/57-62.5Hz, 47-52.5Hz/57-62.5Hz

Power Factor: >99%>99%

Output Efficiency: @120V@230V

Static MPPT Efficiency: 99.5%, 99.5%

Max Output Efficiency: 92.5%, 93.5%

Night Loss Power: <1W<1W

Working Temperature Range: -40℃ to 60℃

Waterproofing Grade: 1P65

Heat-dissipating Method: Self Cooling

Communication Mode: Wireless Communication 433/462MHz

Electromagnetic Compatibility: EN50081, EN50082

Power System Disturbance: EN61000-3-2, EN62109

Network Test: DIN VDE1026UL1741

Certification: CE

Package Weight: 1.043kg

Package List:

1* Micro Inverter

1* Manual

1* Connecting Cable

2* Screw 

2* Nut

4* Annulus

• Complete isolation of output and input, guarantee reliability and safety of power utilization.
• IP65 waterproof streamline design surface, effectively protect the micro inverter from water etching.
• Using 433MHz wireless conmmunication mode, low investment on maintenance, flexible and easy installation.
• Lifelong free intelligent monitoring system to collect real time data in the inverter and to control the on/off switch.
• Reverse AC power transmission technology, allows high efficient usage of power, the rate of power transmission is up to 99%.

Product description

Installation steps 1. Attaching the microinverter to the solar panel back side or to the mounting rack. 2. Connecting the microinverter wrings by simply connecting solar panel connectors (Takes up to 2 Solar Panels) and AC outlet connectors. 3. AC outlet is connected to the 110/120 V AC circuit breaker. 4. Follow utility & local code for connecting grid-tie solar power.

• Designed to connect 2 PV modules and perform DC to AC conversion
• High efficiency with 96% ; 30% Federal Tax Credit on Solar
• 22‐55V DC Solar Panel Input; For 24V Solar Panel or 2x 12V Solar Panels; Add up to 2 Solar Panels
• Very simple installation with built‐in cables and connectors NEMA‐6 enclosure rating for Outdoors and weather proof ;Integrated GFDI; 14 AWG integrated cables
• For any accessories for this inverter, you can search amazon for ' B07CSLTHCZ ' for 50ft cord with inverter adaptor and ' B07CSMH25P ' for the end cap.

User questions & answers

Question:	Thoes two wires comming out on . What does the female end plug into
Answer:	this a grid tie inverter ,when the incoming power goes off this inverter shuts down.
Question:	Can two 24 volt 300 watt panels be used? 3 of these panels generate about 500 watts, even though they're rated at 900 watts (300 each
Answer:	It is Output power: 230V AC .

• Grid Tie Inverter - DC22V-60V is suitable for 36V solar panel (Vmp30-36V; Voc38-46V) Vmp = working voltage; Voc = open circuit voltage.
• Grid Tie Solar Inverter - The starting voltage of the inverter is 30V. Therefore, the DC22V input cannot be used.
• Micro inverter - 60V is just an instant voltage. As a buffer protection, it cannot be used as a working voltage input. Otherwise it will damage the inverter.
• Solar Inverter grid-tie - High performance Maximum Power Point Tracking(MPPT),Pure sine wave output.If the DC connection is loose and causes a short circuit, then smoke may be emitted.The inverter adopts aluminum alloy casing, so there is no fire.
• On Grid Inverter - Small Size with high efficiency,Easy installation,Stackable.

User questions & answers

Question:	I can use this grid tie for battery source
Answer:	Thank you for asking Grid Tie.DC22-60V version: you can use 36V battery as DC input.
Question:	How do we return item under warranty? The unit I purchased worked a few months and stopped working today. No fuses are blown
Answer:	You should contact the merchant. The merchant will first provide you with technical support to identify the problem and avoid damage again. After identifying the specific problem, we will provide you with a warranty plan.
Question:	Bougerv 170 watts solar panel, 12 volts
Answer:	Yes, you can use it! Compatible with 12V solar panel (working voltage Vmp18-21V; Voc20-24V)
Question:	What outlet does this ship with? Can I plug my laptop charger into it
Answer:	Hi, 1: This is not an OFF Grid, AC output can not be directly connected to the load. 2: This is Grid Tie, AC must be connected to the local power grid (for example: home outlet) 3: After starting the inverter, the load will give priority to the power generated by the inverter. 4: The AC output from Smart Microinverter is synchronized and in-phase with the utility grid.

Product features

How to DIY Grid Tie Inverter Solar System?

DC22-60V version.

1: Please check the power of your solar panel, the power cannot be lower than 120W

2: Please check your solar panel voltage, open circuit voltage 34-46V (Voc)

3: Note: Please use solar panels with the same specifications

DC Input

Easy to install, DC connect your solar panel (red terminals connect "+", black terminals connect "-")

Note 1: Do not connect the positive and negative poles. The LED will not light up.

Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits.

AC output

The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet.The switch of the home outlet must be turned on.

Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection)

Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid.

Stackable Connection:

The purpose is let small power inverter become high-power inverter.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 600W of stack used is equal to 2400W, and the number of open stacks (No Quantitative Restrictions).

MPPT technology

Creative MPPT tech makes efficiency higher than 99%. Peak conversion 80%. Consider the conversion rate of solar panel is about 75-80%, and the Grid Tie Inverter is about 80-90%, for example, if you need 400W power output from the inverter, you need to connect it to a solar panel that 555W/0.8/0.9 equals about 555W, (555w*0.8*0.9=400W)

Multiple protections

Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection

Fan Cooling

Intelligence Fan-on temperature >45℃ and off < 40℃. High-speed ventilation fans to help keep the inverter running at a low temperature.

Product description

1.WVC1200W using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Electricity transmission rate of up to 99%.

2.Communication using APP. 

3.We can supply one year warraty.if you have any problem,you can contact us at any time.

Parameter：

Model Number:WVC1200

Maximum input power:1200 Watt

Recommended using solar panels: Power 4*300W,open circuit voltage 36-50VOC

Solar panel open circuit voltage range:36-50VOC

Min/Max start voltage:22-50V

Maximum DC short current:80A

Maximum Input Current:54.4A

Rated output current:9.58A

Rated frequency range: Auto 47-52.5Hz/57-62.5Hz

Maximum units per branch circuit:3PCS (Single-phase)

Output Efficiency:110VAC

Static MPPT efficiency:99.5%

Maximum output efficiency:95%

Night time power consumption:<1W

THD:<5%

Operating temperature range:-40℃ to + 60℃

Waterproof level:IP65

Cooling: Self-cooling

Communication Mode: Wireless APP

Power transmission mode: Reverse transfer, load priority

Monitoring System: Lifetime free

Certificate: CE National patent technology

The package including:

1. one solar inverter

2. one wifi modem

3. some accessories + solar cable

4. One instruction manual

• 1.(-High performance-) Maximum power point tracking (MPPT inverter), electricity transmission rate of up to 99%. Output 110V Pure Sine Wave AC Current. Automatic recognition of 50Hz/60Hz frequencies.
• 2.（-Intelligent manage-)APP monitoring management. User can remotely control the inverter on and off, view the operation and power generation data from inverter. The App software used is compatible with a variety of smart phone or pad.
• 3.(-Power feature-) Micro solar inverter with super maximum power capture algorithm (weak light algorithm); Reverse power transmission; High precision phase detection.
• 4.(-Safety-) The power inverter has IP65 waterproof struct; Anti-thunder, rust-proof property design; Input /output is fully isolated to protect the electrical safety; Over and under voltage protection; Over and under frequency protection; Islanding protection.
• 5.(-Good Heat Dissipation & Easy Install-) Solar Converter Body fully be made of aluminum alloy which can make it has a good heat dissipation performance. And micro converter also makes it easy to install and maintenance in usually.

User questions & answers

Question:	how many panels can I hook up to the inverter
Answer:	The one end (female) is used to add 2nd inverter for expanding the system. Or, it can be capped with amazon item(ASIN#): B07CSMH25P The other end of the inverter plugs into amazon item (ASIN#): B07CSLTHCZ (Power Cable to Connect NEP MicroInverter. 50ft Cord with Plug and Inverter Connector)
Question:	Is it compliant with UL
Answer:	Sure, you can use two 24V panels
Question:	Can i use 100w panels
Answer:	It works ok with 260 watt pvs
Question:	If I install three of the microinverter I just need one with the wifi and the rest just standard
Answer:	They have both 50 and 60 hz capability.

Product features

1200W Micro Solar Inverter

Maximum input power:1200 Watt

Peak power tracking voltage 22-50V

Min/ max starting voltage 22-55V

Waterproof rating IP65

Maximum DC short-circuit:60A

Maximum input operating current 54.5A

Rated output current :10A

Rated voltage range 80-160VAC

Rated frequency range 48-51/58-61Hz

Recommended using solar panels: Power 4*300W,open circuit voltage 36-50VOC

APP Monitoring Function

1.User can download APP Smart Life to monitor and operate Grid Tie Solar Inverter via WIFI in home.

2.The App software is compatible with smart phone or pad, including Android and IOS.

High performance

1. Maximum power point tracking (MPPT inverter) ，Electricity transmission rate of up to 99%.

2. Pure Sine Wave AC Current Output 110V

3. Max 4 pcs 300W 36V Solar Panels can be connected, total 1200W power.

Good Waterproof Performance

The fully waterproof protection which grade reach into IP65 which can prevent rainwater effectively. So Micro solar inverter can work steadily even in humid environment.

Good Heat Dissipation & Easy Installation

1. Solar Converter Body fully be made of aluminum alloy which can make it has a good heat dissipation performance.

2. Micro converter also makes it easy to install and maintenance in usually due to small size.

Power Inverter Feature

1. Maximum power capture algorithm (weak light algorithm);

2. Reverse power transmission;

3. High precision phase detection.

Protection

Intelligent solar inverter has full protection inside to protect inverter and load. Such as Anti-thunder;Over and under voltage protection; Over and under frequency protection; Islanding protection; rust-proof property design.

Connection Diagram

Notes:

*Please connect the inverter following the operation instruction show above. If have any question,please contact with us.

*Non-professionals do not disassemble. Only qualified personnel may repair this product.

*Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials.

*When using this product, avoid children touching playing. Please avoid electric shock.

Product description

The versatile Enphase M250 Microinverter performs in both residential and commercial solar PV installations and is compatible with both 60-cell and 72-cell modules. With its all-AC approach and integrated grounding, the M250 delivers increased energy harvest and reduces design and installation complexity.

The Enphase M250 Microinverter integrates seamlessly with the Enphase Engage Cable, the Enphase Envoy communications gateway, and Enphase Enlighten monitoring and analysis software.

Up to 24 units per branch (3-ph) or 16 units (single-phase). Integrated Ground: no GEC needed for microinverter. NEMA 6 enclosure, 25 year warranty.

• The versatile Enphase M250 Microinverter Enphase M250-72-2LL-S22-US performs in both residential and commercial solar PV installations
• Compatible with both 60-cell and 72-cell modules
• With its all-AC approach and integrated grounding, the M250 delivers increased energy harvest and reduces design and installation complexity
• The Enphase M250 Microinverter integrates seamlessly with the Enphase Engage Cable, the Enphase Envoy communications gateway, and Enphase Enlighten monitoring and analysis software
• 25 year warranty

Product description

1. Three input voltage range, suitable for different solar panels.

1). 18V or 36 cells solar panels, Vmp is 18-21V and Voc is 20-24V.

2). 24V or 60 cells solar panels, Vmp is 26-30V and Voc is 34-38V.

3). 36V or 72 cells solar panels, Vmp is 35-39V and Voc is 42-46V.

2. Support for small power wind turbine using grid power.

3. Creative MPPT tech makes efficiency higher than 99%. Reaction more sensitive and MPPT locking faster.

4. Adopting high-frequency isolation transformer, high efficiency, and high security.

5. Creative circuit design and imported industrial electronic components make application efficiency higher and performance more stable.

6. Parallel modular components design (stacking use) is convenient for systems setting, flexible combination and system scalability.

• Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance.
• Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable.
• Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system.
• Adopting high-frequency isolation transformer type, high efficiency, and high security.
• Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion.

User questions & answers

Question:	My inverter is in a constant state of error??? i have 3, 100 watt panels wired in series for 36v and my voltage on the dc terminals is 51.2 vdc
Answer:	yes, you can cap the load terminals if there is no appliance connect to the load terminals.
Question:	Is this 1741 certified
Answer:	Yes the solar panel can be connected to the battery after the charge controller I don't know what tide pod eating millennial told you no but he is wrong I've been using the panels for an off-grid camp charging my battery Bank when I'm not there it's a little small but I'm not there for days at a time so but a time I come back I have a full battery Bank
Question:	What is the warranty? is is ul1741 or ieee 1547 compliant
Answer:	Not in the way the brakets I got with mine- unless I drilled more more holes in the area where the other angle adjustment holes are. Not a big deal, because if you mount it on something mobile like that, I would highly recommend to drill more holes into the mounting area of the brackets anyway.
Question:	hello friend how are you working and how many panels do you have connected thanks
Answer:	Not sure I made one that lets me lay it down

Product description

Specification:

Item Type: Solar Inverter

Product Series: SG Series

Model: SG350MS

Input Data (DC, PV)

Number of Input MC4 Connectors: 1 Set

MPPT Voltage Range: 24V-40V

Working Voltage Range: 18V-50V

Maximum Input Voltage: 50V

Starting Voltage: 18V

Maximum Input Power: 350W

Maximum Input Current: 12A

Output Data (AC)

Single-Phase Power Grid Type(optional): 120V/230V

Rated Output Power: 330W

Maximum Output Power: 350W

Nominal Output Current: at 120VAC: 2.5A / at 230VAC: 1.3A

Nominal Output Voltage: 120VAC / 230VAC

Default Output Voltage Range: at 120VAC: 80V-160V / at 230VAC: 180V-280V

Nominal Output Frequency: 50Hz / 60Hz

Default Output Frequency Range: at 50Hz: 47.5Hz-52.5Hz / at 60Hz: 57.5Hz-62.5Hz

Power Factor: > 0.99

Total Harmonic Distortion: THD <5%

Maximum Units Per Branch: at 120VAC: 8 Units / at 230VAC: 16 units

Peak Efficiency: 95%

CEC Weighted Efficiency: at 120VAC: 92.5% / at 230VAC: 93.5%

MPPT Nominal Efficiency: 99.9%

Night Power Consumption: <700mw

Working Environment Temperature Range: -40℃ ~ + 65℃

Storage Temperature Range: -40℃-+ 85℃

AC Bus Cable Maximum Current: 20A

Waterproof Rating: IP65

Communication Method: 2.4G

Output Connector (length cm, Left Male M, Right Female F): M15 + F85

Cooling Method: Natural convection, no fan



Package List:

1 x Solar Inverter

1 x Receiver

1 Bag Screw

1 x User Manual

• ▶ Provide Intuitive Data -- The LED display can provide clear and intuitive data. Package List:1 x Solar Inverter;1 x Receiver;1 Bag Screw;1 x User Manual
• ▶ 95% High Efficiency -- The waterproof rating is IP65, the product will not be easily damaged, High peak efficiency, the efficiency is 95%
• ▶ Natural Cooling Method -- The cooling method adopts natural convection and no fan to ensure that the product will not overheat during operation
• ▶ Withstand Harsh Weather -- It is designed to withstand harsh weather conditions with its weatherproof cabling and silicone potted enclosure
• ▶ Complete Accessories -- Waterproof Rating is IP65, Excellent performance and complete accessories, easy to install and remove

• Grid Tie Inverter is not recommended for battery Bank.Grid Tie Inverter DC Input 45-90V(Starting Voltage 49.5V)
• Grid Tie Inverter with Limiter Sensor.Delivers only the power needed by the load
• Voc (solar panel) must not exceed 90V to ensure good output efficiency
• Battery discharge power mode, Can auto regulate depth of discharge of the battery bank
• Micro Inverter Max Power Point Tracking and AC Stackable,Anti-island protection.Product Problem: Please contact us through the seller center. We provide technical support to you.

User questions & answers

Question:	will a set of 48V panels in parallel be in the target incoming voltage range? seems like a 45 volt min is really close to max output on the panels
Answer:	Yes, for the 1000W version, it is recommended not to exceed 1200W. Because the conversion rate of the panel is only 75-80%. The inverter can only handle a maximum power of 1000W.
Question:	Can you hook up more than 1000 watts of solar panels
Answer:	Aluminum wires are everywhere, especially within your power lines to your house. as to your actual question; I would contact the company who sells the inverter and see if they have larger ones, or to see what connector it has to search the web for a larger sensor.
Question:	I have 200 amp service at my home, the wires are aluminum and quite thick. Where can I get a sensor that will fit over large wires
Answer:	How much AH does the 24vdc battery bank needs to get the max power of a single 1000w inverter? Would 100ah or more be ok?
Question:	will this work with a battery ?you can just plug it in a power outlet
Answer:	What is the capacity of your battery? smaller?

Product features

Start DIY your solar system. Reduce your electricity bill.

Because in some countries,Power Meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. the consumers will be charged for power even if it is given to the grid.

Now!!! We call this limiter.It delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.

How to DIY Grid Tie Inverter Solar System?

DC45-90V version.

1: Please check the power of your solar panel, the power cannot be lower than 200W

2: Please check your solar panel voltage, open circuit voltage 76-90V (Voc)

3: Note: Please use solar panels with the same specifications

DC Input

Easy to install, DC connect your solar panel (red terminals connect "+", black terminals connect "-")

Note 1: Please connect the positive and negative poles correctly.

Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits.

AC Output

The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet.The switch of the home outlet must be turned on.

Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection)

Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid.

Stackable Connection

The purpose is let small power inverter become high-power inverter.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 1000W of stack used is equal to 4000W, and the number of open stacks (No Quantitative Restrictions).

MPPT technology

Creative MPPT tech makes efficiency higher than 99%. Peak conversion 80%. Consider the conversion rate of solar panel is about 80%, for example, if you need 500W power output from the inverter, you need to connect it to a solar panel that 500 / 0.8 / 0.8 equals about 780W, (780w * 0.8 * 0.8 = 500w)

Multiple protections

Low power consumption, over current protection, over temperature protection, reverse polarity protection, etc.

Fan Cooling

The fan is controlled by temperature and power, it will start intelligently. Increase the life of the inverter. Of course, it is recommended to install the inverter in a ventilated, cool and dry place.

Product description

600W Grid Tied Inverter,Pure Sine Wave Inverter

DC11V-32V to AC90-140V 50Hz/60Hz Auto

Fit For 12V Solar Panel 21V(Voc) 18V (Vmp)

With MPPT Functions



Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.

The output need to be connected to the grid power. Can not supply power directly to the AC loads.



Smart grid tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in phase with the utility grid.

Output Power:600W/110V

AC Output Voltage: 90V-140V

Frequency Range: 48Hz ~ 62Hz Auto

DC Input: 11V-32V

MPPT range: 15V - 22V.



It will perfect compatible with 12V solar panels

Please note if using 12v battery as input source, output power will not be 100% if voltage less than 15V.



Consider the conversion rate of solar panel is about 75-80%, and the Grid Tie Inverter is about 80-90%, for example, if you need 400W power output from the inverter, you need to connect it to a solar panel that 500W/0.8/0.9 equals about 555W, (555w*0.8*0.9=400W)

• 600W Grid Tie Inverter - MPPT Range 15-22V.【DO NOT use solar controller load ports to connect to the inverter】
• Grid Tie Solar Inverter - Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency
• Solar Grid Tie Inverter - Fit For 12V Solar Panel 21V(Voc) 18V (Vmp)【Extension of solar panel cables. It is easy to cause the positive and negative connections to be reversed. The LED will not light up after connection.】
• Solar Inverter - Max Power Point Tracking and Stackable,Island Protection【The Grid Tie inverter is equipped with banana plugs for easy connection. We have tested that the banana plugs are not firmly connected. The DC terminal will short-circuit. The instantaneous voltage will melt the DC column.】
• Micro Inverter - Over Temperature Protection,Intelligent cooling fan management.If the DC connection is loose and causes a short circuit, then smoke may be emitted.The inverter adopts aluminum alloy casing, so there is no fire.

User questions & answers

Question:	No matter how I hook it up the leds do not light up at all, even trying multiple outlets and replacing the power cord. Is the unit defective
Answer:	240v only, no 120v version exists
Question:	Is this UL-1741 certified (required by some power companies
Answer:	The Enphase Microinverter itself is incapable of being used in an off-grid application, however, it can be incorporated into an AC coupled off-grid and battery-based system.
Question:	Has the proposed distributed generation paralleling equipment been certified
Answer:	It is a separate purchase.
Question:	I have two 300 watt panels. Can this product be used outside but out of the rain? and do I wire them in parallel to the inverter
Answer:	You will need the Enphase IQ7PLUS for a 72 cell module.

Product features

How to DIY Grid Tie Inverter Solar System?

DC11-32V version.

1: Please check the power of your solar panel, the power cannot be lower than 120W

2: Please check your solar panel voltage, open circuit voltage 20-24V (Voc)

3: Note: Please use solar panels with the same specifications

DC Input

Easy to install, DC connect your solar panel (red terminals connect "+", black terminals connect "-")

Note 1: Do not connect the positive and negative poles. The LED will not light up.

Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits.

AC output

The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet.The switch of the home outlet must be turned on.

Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection)

Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid.

Stackable Connection:

The purpose is let small power inverter become high-power inverter.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 600W of stack used is equal to 2400W, and the number of open stacks (No Quantitative Restrictions).

MPPT technology

Creative MPPT tech makes efficiency higher than 99%. Peak conversion 80%. Consider the conversion rate of solar panel is about 75-80%, and the Grid Tie Inverter is about 80-90%, for example, if you need 400W power output from the inverter, you need to connect it to a solar panel that 555W/0.8/0.9 equals about 555W (555w*0.8*0.9=400W)

Multiple protections

Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection

Fan Cooling

Intelligence Fan-on temperature >45℃ and off < 40℃. High-speed ventilation fans to help keep the inverter running at a low temperature.

Product description

Specification:

Item Type: Micro Inverter

Product Series: SG series

Model: SG700MD

Input Data (DC, PV): 

Number Of Input MC4 Connectors: 2 sets

MPPT Voltage Range: 24V-40V

Working Voltage Range: 18V-50V

Maximum Input Voltage: 50V

Starting Voltage: 18V

Maximum Input Power: 2 x 350W

Maximum Input Current: 2 x 12A

Output Data (AC): 

Single-Phase Grid Type: 120V & 230V

Rated Output Power: 650W

Maximum Output Power: 700W

Nominal Output Current: At 120VAC: 5A / At 230VAC: 2.6A

Nominal Output Voltage: 120VAC / 230VAC

Default Output Voltage Range: At 120VAC: 80V-160V / At 230VAC: 180V-280V

Nominal Output Frequency: 50Hz / 60Hz

Default Output Frequency Range: At 50Hz: 47.5Hz-52.5Hz/ At 60Hz: 57.5Hz-62.5Hz

Power Factor: > 0.99

Total Harmonic Distortion: THD <5%

Maximum Units Per Branch: At 120VAC: 4 Units / At 230VAC: 8 units

Peak Efficiency: 95%

CEC Weighted Efficiency: At 120VAC: 92.5% / At 230VAC: 93.5%

MPPT Nominal Efficiency: 99.9%

Night Power Consumption: <700mw

Working Environment Temperature Range: -40 ℃ ~ + 65 ℃

Storage Temperature Range: -40 ℃ ~ + 85 ℃

AC Bus Cable Maximum Current: 20A

Waterproof Rating: IP65

Communication Method: 2.4G

Output Connector (length cm, Left Male M, Right Female F): M24 + F182

Cooling Method: Natural convection, no fan



Package List:

1 x Inverter

1 x Receiver

1 Pack of Screws

1 x Instruction Manual

• ✿【Safety Comes First】People and machines are seamlessly combined, and safety is guaranteed. Prevent oxidation, glue and fix. This product has constant current and constant power output, without overload and overcurrent. And voltage protection, frequency protection, temperature protection, current protection, etc.
• ✿【What are the characteristics? 】Radiation resistance, low temperature resistance, oxidation resistance and hard material.2.4G communication and monitoring method.120V 230V waterproof micro solar inverter, LED display, more clear and intuitive.
• ✿【Simple operation】Only the solar panel needs to be directly connected to the grid-connected inverter, and no batteries need to be connected.Comes with a pack of screws for easier installation and saving effort.
• ✿【Specification】Number Of Input Connectors: 2 sets；MPPT Voltage Range: 24V-40V；Working Voltage Range: 18V-50V；Maximum Input Voltage: 50V；Maximum Input Power: 2 x 350W；Maximum Input Current: 2 x 12A；Starting Voltage: 18V;Maximum Units Per Branch: At 120VAC: 4 Units / At 230VAC: 8 units.
• ✿【Other Parameters of Solar Inverter】Cooling Method: Natural convection, no fan;Output Connector (length cm, Left Male M, Right Female F): M24 + F182;Night Power Consumption: 0.99;Nominal Output Frequency: 50Hz / 60Hz;MPPT Nominal Efficiency: 99.9%.

Product description

This complete micro grid tie inverter kit comes with an AIMS Power 250 Watt Micro Grid Tie Inverter, along with the necessary trunk cable and accessories needed for installation. Use this package to reduce your power bill by producing clean and green power from the sun! This kit is modular and you can add more as needed. This item pairs well with the AIMS Power 265 Watt Solar Panels, Part Number PV265POLY. Each micro grid tie inverter ties directly to the output of the solar panel(s) (up to 310W max per inverter) to produce 240 volts of AC to your main grid power. No complicated designs needed.

• Works with 208 and 240VAC solar systems
• Easily connect this grid tie inverter to your solar panels
• Works with panels up to 300 watts
• Efficient energy production
• No complicated design needed

User questions & answers

Question:	Is this correct? Item weight is 3,5 pound and shipping weight is 20 pound. What else is in the package beside the inverter and cable of 19 feet
Answer:	It is not vehicle dependent. Requires a 12V DC input. Check your current loss on the cabling you plan to use to supply power. I recommend installing close to battery and running short cables. Must be mounted in a weatherproof environment.
Question:	How can you connect this micro inverter when it doesn’t even have a AC plug to connect to normal 110v outlet
Answer:	Recommended PV module power (STC) range (W) 200~310
Question:	will this look up to a 220 outlet
Answer:	These grid tie inverters are island protected. They do not have a way to monitor the power or power limiters. Before purchasing it is important to confirm with your power company if they will allow this grid tie inverter on their system.
Question:	What is the recommended DC input voltage for this inverter
Answer:	I used the AIMS inverters on my solar panels. As long as the output of the panel does not exceed the rating on the inverter it will work. My panels were 250 watt panels, I think the output of the panel was around 220 watts. You can link 6 250 watt panels with this kit.