12 best thermal pastes

Product description

Corsair TM30 thermal paste helps you push your PC to its limit, with a low-viscosity zinc oxide thermal material that's easy to apply. Tm30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds. Each syringe Contains enough TM30 for multiple standard CPU applications, and once installed, TM30 lasts for years with no drying, cracking or thermal degradation. Whether you use liquid or Air cooling, Corsair TM30 thermal paste is ready to keep your PC cool under pressure and Handle the hottest CPUs and GPU with ease. Tech Support # 1-888-222-4346

• Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance.
• Cools your CPU and GPU: Install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures.
• Improved CPU Cooling: Ultra-low thermal impedance lowers CPU temperatures vs common thermal paste.
• Installation Made Easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler.
• Filling the Gap: XTM50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer.
• Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency.
• Safe For You And Your PC: Non-conductive and contains zero volatile compounds.

User questions & answers

Question:	Is it eligible to use in a ps
Answer:	If you would like to. It would probably be similar to what you had. This stuff is ideal because it's not conductive.
Question:	Can i use this on 1080ti gpu
Answer:	You can use this for any GPU or CPU.
Question:	Does this paste need to "set in" before installing my water block? If so, how long
Answer:	I don’t think so. I just put mine on and started it up. I hear that the paste will “set” from the heat coming off the CPU. Just remember to put a pea size amount and when screwing on the cooler to apply even pressure alternating tightening the screws so that the paste spread evenly.
Question:	Is it thick or runny
Answer:	Easy to apply and temps are good. It is thick enough to not run all over the place but then enough to spread easily. Very first application came out fairly thick with a liquid like substance at the base of it. So give it a good shake before applying. I removed that application and applied another which was easily spread on the CPU with a spreader without worry of run off. I like the paste.

Product features

ENTHUSIAST CPU & GPU THERMAL COMPOUND

Premium zinc oxide based thermal compound for optimal thermal performance to improve heat transfer and lower temperatures.

IMPROVED CPU COOLING

Ultra-low thermal impedance lowers CPU temperatures vs common thermal paste.

FILL IN THE GAP

CORSAIR TM30’s low viscosity allows it to easily fill microscopic abrasions and channels in your CPU’s heatspreader and cooler’s contact plate, for maximum thermal transfer area.

TM30 is non-conductive and contains zero volatile compounds, making it safe for both you and your PC.

RELIABLE AND SAFE

CORSAIR TM30’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency, so you don’t have to worry about changing or re-applying thermal paste periodically.

Product description

Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there's no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm

• The new version of the #1 bestseller: the MX-4 Edition 2019 convinces everyone with its usual quality and performance, that have always distinguished it.
• Better than liquid metal: composed of carbon micro-particles which lead to an extremely high thermal conductivity. It s that heat generated from the CPU or GPU is dissipated efficiently
• Thermal compound: The MX-4 Edition 2019 formula s exceptional heat dissipation from the components and supports the stability needed to push your system to its limit
• Safe application: The MX-4 Edition 2019 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards
• High durability: in contrast to metal and silicon thermal compound, The MX-4 Edition 2019 doesn't compromise over time. Once applied, you do not need to apply it again as it will last At least for 8 years.

User questions & answers

Question:	Does this paste hold the heat sink on its own on a Blackberrys Pi device? How much time does it take to cure to hold the heat sink like a glue
Answer:	This isn't a thermal glue so it wont hold well after it dries. Pi devices usually don't produce enough heat to need more than a little air flow. Are you sure you need a heat sink? Check out Arctic Alumina Thermal Adhesive. That will work better than this for adhesion.
Question:	How long will thermal compound paste last for a computer repair technician? will it finish fast? as the tube looks so small
Answer:	The tube may look small, but considering the amount you need, you could easily cover more than a couple dozen CPUs (depending on the size of your CPU, of course)! You only need to apply very, very little and then spread the paste evenly. I noticed that a pea-sized blob of paste may already be too much because a lot of the material sticks to the tool! I do not recommend the method where you put a blob in the middle of the CPU and then apply the heat sink on top of it hoping that the paste would spread out on its own: a) the paste may not spread evenly and therefore might create hot spots; b) you may waste material which would only run beyond the borders of the CPU. The manufacturer claims an 8-year durability. I can't comment about that since I haven't used it that long.
Question:	Roughly how many applications will you get out of one tube
Answer:	I still have more than half of a 4g tube left, 4 years after I bought it - it has an eight year shelf life, IIRC... I haven't kept track for certain, but I think I've done at least 5 applications or more and still have half a tube left. Crazy thing is right now, for $1 less, you can buy the 8g tube from Amazon directly rather than the 4g tube from the other seller - seems a no brainer. Great stuff.
Question:	is it rgb
Answer:	If you drop acid before you apply it... Yes!

Product features

Easy to Apply

With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.

Excellent Performance

The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It ensures that heat generated from the CPU or GPU is dissipated quickly and efficiently, even suitable for overclocking. Superb in performance, MX-4 ranks among the top thermal compound, thermal paste or thermal grease in the market.

Safe Application

It does not contain any metallic particles so electrical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.

Well Proven Quality

The design of our thermal paste packagings has changed several times over the years. The formula of the composition has remained unchanged, so our MX pastes have stood for high performance and quality for years.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• WELL PROVEN QUALITY: The design of our thermal paste packaging’s has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality
• HIGH PERFORMANCE: With excellent temperature reduction performance, the MX-4 is ideal for CPU and GPU cooling, and other applications between power semiconductor components and heatsinks
• SAFE APPLICATION: The MX-4 is metal-free and non-electrical conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards
• HIGH DURABILITY: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years
• EASY TO APPLY: With an ideal consistency, the MX-4 is very easy to use, even for beginners

User questions & answers

Question:	will this work for adding a heat sink to a 18v 550 dc motor
Answer:	Should work just fine.
Question:	How many coffee lake cpu applications is the 4g enough for? i will be doing the "one spot" method as recommended
Answer:	I did two and have some left in tube - not sure how much.
Question:	How does this one (current edition?) for 8.99? Compare to the one a few dollars more expensive
Answer:	I've never done a true comparison but I believe the more expensive paste does a slightly better job at transferring heat for the extreme overclocking crowd. It might also resist caking and drying at higher temperatures like those found in extreme OC builds. I can't say for sure any of this is true, not having done the tests for myself, but this logic seems to be the general consensus among PC builders.
Question:	Full page of blahblah about performance, but where is tge number? Wm/K
Answer:	Thermal Conductivity: 8.5 W/(mK) https://www.arctic.ac/us_en/mx-4.html#techspecs

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• WELL PROVEN QUALITY: The design of our thermal paste packagings has changed several times, the formula of the composition has remained unchanged, so our MX pastes have stood for high quality
• HIGH PERFORMANCE: With excellent temperature reduction performance, the MX-4 is ideal for CPU and GPU cooling, and other applications between power semiconductor components and heatsinks
• SAFE APPLICATION: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards
• HIGH DURABILITY: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years
• EASY TO APPLY: With an ideal consistency, the MX-4 is very easy to use, even for beginners

User questions & answers

Question:	does this work with playstation 4 console
Answer:	I think i would have noticed anything obnoxious, and I am sensitive to strong odors. Using it a year now there certainly isnt--just checked.
Question:	It´d work for my laptop noisy fan cooler
Answer:	I keep medication in the bag with an extra ice pack. It was cold for well over 8 hours.
Question:	I know this good for ps4 but can pad be good too and what size
Answer:	I wash mine by hand in cold water with Dawn dish soap and let it air dry. I take my in a kayak three times a week, so it can handle getting soaked a lot.
Question:	How many grams needed for I
Answer:	I ordered a set of two of the Xtra small ones. Was great for a lunch for a couple. My girlfriend and I took them on a hike. We fit a hoagie sandwich, carrots, sliced cucumbers, chips, a pudding cup, a 2 pack of Oreos, a spoon, and a small ice pack in each of them just fine. So, for a lunch, it's perfect. If you're trying to for water bottles, and Tupperware containers, and a bunch of crap in it, don't get it. But for a lunch or snacks, it's perfect. :). As far as actual size, I'd say a foot long (maybe foot and a half) long, by about 8 inches wide, and 5 or 6 inches tall. Hope this helps.

Product features

Easy to Apply

With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.

Excellent Performance

The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It ensures that heat generated from the CPU or GPU is dissipated quickly and efficiently, even suitable for overclocking. Superb in performance, MX-4 ranks among the top thermal compound, thermal paste or thermal grease in the market.

Safe Application

It does not contain any metallic particles so electrical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.

Well Proven Quality

The design of our thermal paste packagings has changed several times over the years. The formula of the composition has remained unchanged, so our MX pastes have stood for high performance and quality for years.

• Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles.
• Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability
• Bonus Tool will come in handy rather then getting your hands dirty
• Coverage Area: A 3.5g gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5g gram syringe will cover approximately 16 square inches.
• 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core

User questions & answers

Question:	Is this paste electrically non conductive
Answer:	yes
Question:	What is the Thermal conductivity in W/mK
Answer:	I never trust a product whose critical characteristic, like thermal conductivity, the manufacturers won't specify. Don't buy it.
Question:	Work for PS
Answer:	Yes it should work great. Just order enough as tube is pretty small.
Question:	What is that cursed image? Look at image 5. What is that man doing
Answer:	He's doing it wrong.

Product features

Performance

3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches

Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver

Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.

The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)

• ✔【Better Than Liquid Metal】Super carbon nano-grade super thermal conductive silicone grease. Thermal conductivity 5.15 W/m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated.
• ✔【Safe For You And Your PC】Strong insulation performance, withstand voltage above 10,000 volts.
• ✔【Easy to Use】Thermal paste has ideal consistency and is very easy to use even for beginners.
• ✔【High Durability】Low thermal resistance can keep mushy for a long time. Wide operating temperature range, stable performance under -30℃-280℃ environment. High heat dissipation performance, high-cost performance. It will not compromise over time.
• ✔【Safety Application】Suitable for CPU radiator or chip. High-temperature resistance, low thermal resistance, and high conductivity can achieve excellent heat transfer. Suitable for CPU, VGA, chipset, and other PC components.

User questions & answers

Question:	What should I use to clean the old Thermal paste
Answer:	Hello, the light can be used in wood shelf.
Question:	How many led chips (vero29) will this tube work for
Answer:	16 inches
Question:	This is non-conductive
Answer:	We recommend 3-8 inches
Question:	Can I apply on any console a with heat sink
Answer:	We measured the chain and it is 25.5 inches long.. Would depend if the customer hung end to end or doubled and then it would measure about 12.75 inches ..
Question:	How many grams is this some say its NOT 4.0 grams what is it
Answer:	Hello! I have been using these for my basement hydroponics. I swapped out the bulbs that shipped with these fixtures for different 3500k T5 bulbs that I had to help with the flowering of my tomatoes. If you burn out, break, or want a different bulb, these should work with any 4ft T5 fluorescent bulb.

Product features

Thermaltake TG-7 Thermal Grease

Product Description

Thermaltake high performance and reliable Thermal grease with diamond powder inside for best thermal conductivity, maximizing heat transfer by eliminating the air gap between the heat source and the heat sink caused by the irregular surfaces.

Thermal Conductivity

TG-7 is made for extreme performance, delivering excellent long-lasting thermal conductivity with diamond powder inside. It won’t crack or dry out during usage.

Easy to Apply

Provided spreader makes it easier to apply thermal grease on the contact surface of the heatsink to improve the heat dissipation of the processor.

Long Life Span

More effective in providing optimum protection against CPU heat damage for a long life span usage.

Cool Down Quickly

Super carbon nano-grade super thermal conductive silicone grease. Thermal conductivity 5.15 W/m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated.

Easy To Apply

It has proper viscosity and density is simple and convenient to use and has good consistency whether it is applied by beginners or even with fingers.And it has excellent performance and can continue to maintain good thermal conductivity.

Widely Used

Computer Freezes, Blue Screens, Game Lag, computer automatic shutdown and restart, etc., to a large extent, are caused by excessive data processing by the CPU processor, CPU temperature rise, and fan speed increase. The use of silicone grease with high thermal conductivity can cool the temperature and delay processor aging.

Specifications

Thermal Conductivity: 5.15 W/mK Size: 5.28in × 0.35in/13.4cm × 0.9cm

Weight: 1 G/pcs

Thermal Impedance: <0.004*C-IN2/W

Viscosity: 12500

Concentration: 330±101/10MM

Instantaneous Temperature:'-50~340°C

Working Temperature:'-30~280C

Silicon Compound: 10%

Carbon Compound: 45%

Oxidized Metal Compound: 45%

Product description

The Arctic Silver 5 High-Density Polysynthetic Silver Thermal Compound enhances the compound's performance and long-term stability. Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer. Arctic Silver 5 will not separate, run, migrate or bleed.

User questions & answers

Question:	My temps on my i7 are now hotter than when I was using the compound that came with the cooler (the cooler master kind). I had to lower my clocks because the temps were getting too high! Is this normal
Answer:	Yes
Question:	How often should thermal paste be replaced? I have a i7 i have had it about 4 years? wondering if it needs to be done. No temp issues with cpu
Answer:	3 years
Question:	Does this stuff ever expire? I have a tube that is about 10 years old and I'm not sure if I should use it or buy a new tube
Answer:	Rx570 is better
Question:	What exactly does this stuff do? It seems like it's pretty important to computer building. And also, how do you apply it? And to what
Answer:	8

Product features

Arctic Silver 5 AS5-3.5G Thermal Paste

Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability. Available at Arctic Silver resellers worldwide. Arctic Silver 5 is the reference premium thermal compound. Arctic Silver 5 is optimized for a wide range of bond lines between modern high-power CPUs and high performance heatsinks or water-cooling solutions.

Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles.

Performance

3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.

Controlled Triple-Phase Viscosity

Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.

The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)

About Arctic Silver

Arctic Silver Inc. is a privately owned engineering corporation which develops and manufactures thermally conductive compounds and thermal adhesives for the application of heat sinks to high-powered electronic components such as processors, LEDs, chipsets and other electronic devices. Founded in 1999, the company's facilities are located in Visalia, California, US.

Product description

The Kryonaut thermal paste was specially developed for the extremely demanding applications and the highest demands of the overlocking community. Kryonaut is also recommended as a top product for critical cooling systems in the industrial sector.

Especially for overclocking

Excellent thermal conductivity

No curing

High long-term stability

Not electrically conductive



"Kryo" - the Greek word for "cold", which is also used in cryogenics - indicates that the  Kryonaut thermal paste is especially suitable for use in the low temperature range - it was developed for the true "Kryonauts" among the "Extreme Overclockers"."Kryo" - the Greek word for "cold", which is also used in cryogenics - indicates that the  Kryonaut thermal paste is especially suitable for use in the low temperature range - it was developed for the true "Kryonauts" among the "Extreme Overclockers".



Kryonaut  uses a special carrier structure, which does not begin any drying processes even at 80 ° C. This carrier structure ensures that the nano-aluminum and zinc oxide components contained in the paste combine optimally, thus optimally compensating for unevenness in the heat transfer medium (e.g. the CPU) and a heat sink (e.g. heat sink) with excellent thermal conductivity.



Thermal conductivity 12.5 W / mk

Thermal resistance 0.0032 K / W

Electrical conductivity * 0 pS / m

Viscosity 120-170 Pasdensity 3.7g / cm3

Temperature -250 ° C / +350 ° C

Content  1g

Model: TG-K-001-RS

• Thermal paste ideal for optimizing thermal conductivity
• Thermal conductivity: 12.5 W / mk
• Thermal resistance: 0.0032 K / W
• Electrical conductivity: * 0 pS / m
• Content: 1g

User questions & answers

Question:	Is this better than ic dimond paste
Answer:	Check out the charts- https://play3r.net/reviews/cooling/thermal-paste-comparison-2017-what-is-the-best-thermal-paste-2017/
Question:	Is this compound electrically conductive
Answer:	No, this product is not electrically conductive
Question:	How many uses is this good for? i want to do my cpu and my dual gpu 295x2 card. i tend to do a single small centered line method of applying paste
Answer:	Late answer, but relevant still. I'd say closer to 10 proper applications. 4-5 if you don't really give a crap. I was able to repaste my old Desktop's GTX 660ti, and do my laptop's CPU and GPU twice because I wanted to test how much Kryonaut works best. I still have enough to do all 3 again, but my first application on the CPU and GPU were the larger amount some people use for other pastes, but this paste really heats up and doesnt work with too much. I found it is most effective to very sparingly add as you spread until a paper thin layer is on the surface of whatever you are pasting. Don't worry about the layer being even or perfect, the Heatsink will fix that.
Question:	Does it come with RGB lighting
Answer:	It’s compatible with MSI RGB... my cpu heatsink blocks the view though.

• SAFETY APPLICATION: SYY is metal-free and non-conductive, which eliminates any risk of short circuit and adds more protection to the CPU and VGA card.
• BETTER THAN LIQUID METAL，Thermal Conductivity:15.7W/m-k，It is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated.
• THERMAL COMPOUND: SYY thermal paste Edition 2020 formula has excellent component heat dissipation performance and has the stability to push the system to the limit.
• EASY TO APPLY: SYY thermal paste has ideal consistency and is very easy to use even for beginners.
• HIGH DURABILITY: In contrast to metal and silicon thermal conductive adhesives, SYY thermal paste 2020 will not compromise over time. After applying, you do not need to apply again because it will last at least 8 years.

User questions & answers

Question:	How is the viscosity of this thermal grease
Answer:	This thermal grease is moderate in viscosity and can be easily applied as a uniform thin layer,If the viscosity is too high, the thermal grease will not be easily applied. If it is too low, it will not be easy to control during the application of thermal grease.

Product features

Excellent Performance

The SYY-157 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently, even suitable for overclocking. Superb in performance, SYY-157 ranks among the top thermal compound, thermal paste or thermal grease in the market.

Optimised Packaging Saves Resources

A sustainable use of resources is really important for us at Thus we updated the packaging of the SYY-157 to minimize it's CO2 Footprint.

The practical packaging bag of our thermal compound helps us to reduce the environmental impact of packaging materials by about 45% and thereby save resources.

Safe Application

The computer can work better after using thermal paste.It does not contain any metallic particles so electrical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.

Easy to Apply

Mainly used in computer CPU Thermal.With an ideal consistency, the SYY-157 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• MULTIPLE VARIANTS: ARCTIC MX-5 is available in sizes ranging from 2 to 50 grams. Resealable packaging prevents the paste from drying out. Alternatively available with spatula
• SAFE TO USE: ARCTIC MX-5 is completely metal-free, eliminating the risk of short circuits, discharges and corrosion damage to the radiator bottom
• EASY APPLICATION: Thanks to its viscosity, MX-5 is easy to apply. It spreads evenly and allows for a very thin layer regardless of the application method used
• VERSATILE USES: Can be used on CPUs, GPUs and power semiconductor components. Thanks to its excellent properties, the ARCTIC MX-5 can be used in many scenarios without hesitation
• EXCELLENT RESULTS: ARCTIC MX-5 can be applied in a particularly thin layer. In combination with its high thermal conductivity, this results in very low thermal resistance

Product features

Outstanding Results

With its new formula, the MX-5 allows a low minimum bondline thickness and thus features in combination with a high thermal conductivity a very low thermal resistance. Thanks to its non-drying and non-bleeding properties, it guarantees a good long-term performance.

Highest Thermal Conductivity

The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-5 thermal paste is composed of carbon microparticles which fill these cavities. This leads to high thermal conductivity, guaranteeing that heat is dissipated efficiently from the CPUs, GPUs or power semiconductor components.

Easy Application

Thanks to its consistency, MX-5 is easy to apply, even for beginners. The video in the picture gallery demonstrates different application techniques to avoid air pockets between processors and coolers.

Safe Application

In contrast to pastes based on metal oxides or liquid metal, ARCTIC MX-5 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits and discharges, plus you don't have to worry about corrosion damage to the cooler base caused by liquid metal.

Product description

Dracaena offers the best thermal solutions. CTG9 thermal paste is a high performance, suite for heatsink, CPU, and other applications.

• New release 4 Gram thermal paste, high quality and performance
• Thermal compound: 8.5w/mk, exceptional heat dissipation capacity, push your system performance to the limit
• Safe application: CTG9 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA card
• High durability: iCTG9 doesn't compromise over time. it will last for up to 8 years.
• Better than liquid metal: composed of carbon micro-particles which lead to an extremely high thermal conductivity

Product description

High Conductivity, Great Cooling, Unconditional Quality This high thermal conductivity thermal paste will get your job done with ease and peace of mind. Bonyx specializes in thermal conductive compounds designed specifically for use with CPUs, GPUs, and other Heat source to Heatsink uses. Try it out - you won't be disappointed! Comes in an easy to use 1.5g syringe suitable for at least 1 CPU/GPU core.

• High Thermal Conductivity: >3.2 W/mK
• 5-pack of 1.5g Easy-to-Use and Store Syringes
• Silver polysynthetic thermal paste grease
• Great for Computer CPU & GPU
• Get system cooling performance you can trust

User questions & answers

Question:	whats the experation date, also will cold storage effect lifespan
Answer:	I have the same problem with my AMD FX8350 CPU and THAT is using Corsair H100 Water cooling with fans (4) in push/pull setup.I have full coverage and used "Artic Silver" before; yet I am running at 60-C TOO HOT..Some answers state too much grease; you really can't use too much as all the excess would squeeze out and around the cpu ( which isn't good either.) The claim made by Artic Silver is a number of heat cycles to set the particles. Meaning computer turned off cooled down and booted back up a number of times. Temps are also influenced by the rooms temperature the computer is in as well. As I've said I have used this product and can not explain why I am getting these temps? I removed the product and used the thermo grease I have been using. NOW my temps are at CPU idling 29-C and full all eight cores at 125w CPU 4.3 Ghz 100% load 45-50 C.
Question:	Can u use this for a original xbox, ps3, ps
Answer:	I used to use only Arctic Silver 5 for years of building computers. About 4 years ago I noticed some of the computers CPUs were running hotter than expected. I pulled off the CPU coolers to find that the arctic silver had turned into a solid. It was like the coolers were welded to the CPU and in some cases I couldn't remove the cooler without the CPU coming off with it. These machines were around 3 to 4 years old. After replacing the arctic silver with new paste they ran better and cooler than when I originally built them. I do believe this stuff used to be the "best" (like 6 or 7 years ago) but now there are much better options that last longer without losing their heat transfer capabilities.
Question:	Do we get 5 x 1.5g or 1.5g total
Answer:	If still in un-opened tube or properly sealed tube it should be fine. I've heard people have used after 6 years with no issues, but that is with a complete un-opened tube. However, just make sure the connection to the heat sink and CPU is cleaned thoroughly before applying. If after; using your own 10 yr old tube, and find the temp of your CPU running a little high then I would recommend buying a new tube. Actually, I would recommend buying a new tube anyway. This tube is small and will work for a few installations. That way, why hassle with getting it done with your tube only to find out it hasn't held well over the years. Good luck.
Question:	Where can i get the msds for this
Answer:	The surfaces of CPUs and heat-sinks, no matter how perfectly flat they may look, contain microscopic pits and valleys. These pits and valleys trap air, which is one of the worst conductors of heat imaginable, and this is where thermal pastes comes in. Thermal paste is designed for optimal thermal conductivity and is used to fill in all of those little pits and valleys to provide molecule to molecule thermal contact. This translates into lower temperatures, longer component life, and no burnt out CPUs. NEVER run a computer without a heat-sink and thermal paste installed, it can take only seconds to permanently damage or destroy your CPU.There are many different levels of quality among thermal pastes. The stuff that comes with pre-built computers or packaged with processors and most heat-sinks are considered the bare minimum while Arctic Silver is considered by most to be the best available. Arctic Silver claims that Arctic Silver 5 will lower CPU temperatures by 3-12°C over standard pastes with most actual users say it lowers it by 10°C.As to how to install it. Consult the manufacturers website of whatever thermal paste you purchase and in lieu of that try the heat-sink manufacturer, the processor manufacturer, or the internet in general. The directions for Arctic Silver can be found at http://www.arcticsilver.com/methods.html. You may want to consult YouTube after reading up on the official method to see it done in practice before doing it yourself.