5 best subwoofer kits

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

car subwoofer

• Package Includes: PRORECK PR-1500.1M 1500W Amplifier, dual 12" Car Subwoofer, Complete Amp Installation Wire Kit.
• PRORECK PR-1500.1M Dual 12” Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms.
• 3.This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound.
• Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire set, can meet your complete needs.
• Wiring Kit Features:High Grade Twisted Pair 100% Copper RCA Cables,Blue Super Flex Power Cable,Black Ground Wire,Black Remote Cable and Remote control,Black Split Tube,Speaker Wire,Gold Plated ANL Heat Resistant Fuse Holder,30 Amp ANL Gold Plated Fuse.Accessories: Wire ties, ring terminals, butt connectors, spades and grommet. Amplifier dimensions: 11 x 9.1 x 1.9 inches (L x W x H) Subwoofer dimensions: 28.7 x 14.2 x 15.7 inches (L x W x H)

User questions & answers

Question:	Dose this system contain two subwoofers
Answer:	It's 2.0. Conventional micro usb so it fits practically any Android device.
Question:	What’s the actual size of the speaker box ? Can it fit in my bmw f30 truck
Answer:	In general, yes, that should work fine. Be aware that the KitKat (4.4.2) OS changed the way that apps are allowed to access files on SD cards. If you've upgraded to KitKat, it's possible this issue may affect USB flash drives as well. Installing a media player that plays nicely with KitKat should fix the problem. I just tried it with a new Tab 4 8.0 running KitKat and it worked perfectly. So if your Note 2 can access files off a flash drive it should work fine.
Question:	How comes the image show 2, 12" speakers and I'm getting only one
Answer:	It doesn't work with the 2013 Nexus 7. I also connected an OTG cable, and it still doesn't work.

Product description

The Rockville RV8.2A Single 8"" 800 watt vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. most packages that have a 2 channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings. CEA-2006 compliant means that these are tested and rated by the same industry standards used by other famous brands like Kenwood, Sony, Kicker, etc. The subwoofers in this package are of superior quality. They feature high power 1.5"" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features.



The distinct advantage of the Rockville Bass Packages are that our systems from the woofers to the enclosures and amplifiers were all designed and engineered from scratch to work specifically together as a system. We tested these for months to ensure these met our rigorous quality standards. The final result is a super efficient bass response with loud, deep and clean sound.

• Rockville RV8.2A Single 8" Bass Enclosure System With matching Mono Block Amplifier
• 800 Watts Peak Power / 250 Watts RMS CEA-2031 Rating
• Dual 8" Bass Enclosure System with matching Mono Block Amplifier
• Quasi Transmission Line Cabinet Design. Fully adjustable low pass crossover: 50Hz - 250Hz
• Bonded, Stapled and Braced 3/5" MDF Cabinet

User questions & answers

Question:	can i use the amp with 2 Dual 12 inch speakers
Answer:	Yes, the package including one piece of phone case, two pieces of screen protector, one installation frame and a installation bag which includs wet wipes, cleaning cloth and sticker. You can use the installation frame and bag when you put the screen protector on, which will help your work much easier and faster. If you met any problem when using the product please contact us.
Question:	Will it work with a 2002 Toyota Highlander with stock stereo
Answer:	It protects it from scratching if you set it down, because it raise up, but it does not have a cover on the camera square, it is an open square.
Question:	Can it fit on a Dodge Challenger
Answer:	Not surr
Question:	I plugged and wired everything up correctly and it doesn’t work!!! Can someone please help me
Answer:	No, the metal ring will affect it .

Product features

Rockville RV8.2A 800 Watt Dual 8" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

The Rockville RV8.2A Single 8" 800 watt vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. most packages that have a 2 channel stereo amplifier. This mono amplifier is built just for loud bass. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings. CEA-2006 compliant means that these are tested by the same industry standards used by other famous brands like Kenwood, Sony, Kicker, etc. The subwoofers in this package are of superior quality. They feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features.

The distinct advantage of the Rockville Bass Packages are that our systems from the woofers to the enclosures and amplifiers were all designed and engineered from scratch to work specifically together as a system. The final result is a super efficient bass response with loud, deep and clean sound.

Subwoofer and Enclosure Features:

Product description

Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the (+) terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.

• Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
• 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
• Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
• Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

User questions & answers

Question:	Does this come with everything needed for installation
Answer:	Yes
Question:	does anyone know if it will fit under the seat in an 81 gmc k
Answer:	It should. The box is not too big. It fits in my 2002 Mercedes c240.
Question:	What are the true measurements of this thing? Can someone get out there with a tape measure because owners are reporting different numbers? Thanks
Answer:	No
Question:	Can i hook this up on a harley Davidson
Answer:	It is not ported...it's a sealed unit.

Product features

Rockville RW10CA 10 inch 800 Watt Slim Low Profile Active Powered Car Subwoofer

The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant.

Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder. If you are not happy with any Rockville product we will take it back within 30 days of when you receive it and refund you. We know our our products will satisfy you.

The RW10CA is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.7 inch thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.

Product description

Description of RTB12A:

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.

Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

Description of RWK10: The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge.

• Package Includes: Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote, Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables.
• Features of RTB12A: Rockville RTB10A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote, 600 Watts Peak/300 Watts RMS, 10“ High power woofer in vented tubular enclosure, Integrated, built-in 300 Watts RMS Rated amplifier, Rear aero vent bass system, Speaker level and RCA line-level input.
• Frequency response: 30Hz-200Hz, Sensitivity: 111 dB, Adjustable bass crossover, Dashboard adjustable bass remote control, Molded steel woofer grill, Four steel mounting brackets + two canvas straps with Velcro fasteners, Tube is covered in durable aviation grade tweed with embroidered logo, Dimensions: 12.75” x 22.83“.
• Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17' 10 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3' 10 Gauge Clear SuperFlex Ground Wire.
• Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets , Soft abrasion proof insulating jacket allows for 100% improved flexibility, PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

User questions & answers

Question:	Is it waterproof?? Does anyone have one on there boat
Answer:	The SM-SH51 Cleats that the pedals come with have a 5° Float
Question:	What connector is needed for high level inputs
Answer:	I recommend another peddle which is better for regular shoes and bike shoes: Shimano PDT400 Clickr Pedal. I have had both and have fallen many times with the PD-M540 but none with the PDT400. The PDT400 also has a plastic platform around it to support regular shoes. The two have a similar design but the PDT400 is a later model and is easier to get in to and out of.
Question:	Does it come with amp
Answer:	Yes they do, there two different kinds of cleats, these are the ones that only release by rotating the heal outward. The other type of cleat releases in multiple directions, I personally don't care for them.
Question:	Do i still need to buy an amp or not for it
Answer:	Average Weight 352g (pair)Series SHIMANOPedal System SPDSPD Cleat Surfaces both surfacesSpindle Thread BC 9/16" x 20 T.P.I.Spindle Material chrome-molyCartridge Spindle yesCleat Retention Indicator yesCleat Retention Adjuster yesMud Shedding Design yesPedal Body Material aluminum / barrel finishReflector SM-PD22

Product features

Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote+Amp Kit

Package Includes:

• Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote
• Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RTB12A



Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.



"Good things do come in small packages" Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.



Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim…experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.



Features:

• Rockville RTB10A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote
• 600 Watts Peak/300 Watts RMS
• 10“ High power woofer in vented tubular enclosure
• Integrated, built-in 300 Watts RMS Rated amplifier
• Rear aero vent bass system
• Speaker level and RCA line-level input
• Frequency response: 30Hz-200Hz
• Sensitivity: 111 dB
• Adjustable bass crossover
• Dashboard adjustable bass remote control
• Molded steel woofer grill
• Four steel mounting brackets + two canvas straps with Velcro fasteners
• Tube is covered in durable aviation grade tweed with embroidered logo
• Dimensions: 12.75” x 22.83“

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RWK10

 

The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!



Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing. The resistance per foot of this kit is extremely low compared to any other amp kit in its range. The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit. We were more shocked than anyone about these tests, because we used to sell some of those amp kits. (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes set of RCA cables.

Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• 17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F