9 best boss audio subwoofer cables

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

• BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
• PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• DIMENSIONS: 14 inches in Depth, 12. 3 inches in Width and 3. 3 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• : BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	I have a boss 1100 riot mono amp, will the bass gain control knob work with this
Answer:	Yes, it will. But there is one included as well.
Question:	Is this good for the 2019 rav
Answer:	Yes it will fit in your rave 4 as amplifiers are universal.
Question:	I have a bronco with a kenwood stereo and kenwood speakers(4) will this enhance my sound and i am not looking for overpowering bass, is this the right
Answer:	They are not overpowering but they do add bass you can feel with proper placement. under drivers seat and one under pass seat. I would try 2 of the BAB10`s they just sound better and will still barely fit ....check the size specs first. either way you cant go wrong they both sound great! Thanks, Adam
Question:	Can you link two together with one remote
Answer:	WHEN YOU SAY REMOTE DO YOU MEAN 1 REMOTE VOLUME CONTROLLER . I HAVE 2 BAB10'S I WONDERED THAT MYSELF. NOT WANTING TO HURT EITHER UNIT I JUST PUT THE VOLUME CONTROLS SIDE BY SIDE. I'D LIKE TO KNOW WHAT BOSS SAYS.

Product features

Amplified Space Saver

A built-in amplifier powers the 10-inch subwoofer. No need to have a subwoofer housed in a box AND a separate amplifier. If you have a small cabin to work with, the BAB10 will provide the rich bass that every sound system cannot do without.

Remote Subwoofer Control

A wired remote subwoofer control at your fingertips gives you control, so when the need hits… so does your BASS

Product description

Show your music who's Boss and deliver unparalleled bass with the Boss Audio 12-Inch 1600-Watt SVC Car Audio Subwoofer with included shallow box enclosure and amplifier kit. This single voice coil, 12-inch subwoofer is stands and delivers with 800 watts of RMS power. It also features a polypropylene cone, butyl rubber surround, 87 dB sensitivity, 35 Hz resonant frequency, and a 4-ohm impedance. Great for low to medium volume applications, this subwoofer features a mounting depth of 5.125 inches, and will take your car audio to the next level every time you push play. Load this subwoofer into the included box enclosure for a perfect fit and some of the richest, deepest bass out there. With the included 1100-watt monoblock class A/B amplifier and wiring kit, you'll have everything you need to take your car audio to that next level.

• Subwoofer
• 12-inch car audio subwoofer
• 1600 watts max power; 800 watts RMS power
• Mounting depth: 5.125 inches
• 4-ohm impedance

User questions & answers

Question:	Will it fit.under backseat of a.1998 dakota quad cab
Answer:	Yes it does well in flat electric burners!!!
Question:	Will it fit in the trunk of a toyota camary
Answer:	The fry pans do not come with lids, but you can buy a 12" lid to match this 12" fry pan. We do have 12" stainless steel lid(not a see through glass one) in our warehouse that we can send you one if you can provide us your ship to address.
Question:	Will this fit in a 1995 Ford F-150 2 door
Answer:	Hello, thank you for your interest in Turbo Pot. Our cookware is designed and tested here in California, manufactured in China. Similar to Apple.
Question:	Can you control the amount of bass
Answer:	Turbo Pot's website says; The fin pattern does give you an impression that it might be difficult to clean. In reality, there is not real issue in term of cleaning. Spills from cooking will drip down the side to the burner or counter top, the spill won't go in between fins. Besides Turbo Pots are dishwasher safe.

Product description

Give your car's audio system extra bump with the ultimate performance and high power of the Boss Audio CX122 12-Inch 1400-Watt Subwoofer with included shallow box enclosure and amplifier kit. Offering 1400 watts of max power and a 700 watt RMS power rating, the Boss CX122 sub delivers with its heavy-stamped steel frame, single 4-ohm voice coil and a custom-tooled, injected cone. It also features an efficiency of 94 dB and frequency response of 25Hz-3kHz. With a mounting depth of 4.125 inches, the Boss Audio CX122 12-Inch 1400-Watt Subwoofer is ready to deliver for you. Load this subwoofer into the included box enclosure for a perfect fit and some of the richest, deepest bass out there. With the included 1100-watt monoblock class A/B amplifier and wiring kit, you'll have everything you need to take your car audio to that next level.

• Subwoofer
• 1400 watts max power; 700 watts RMS power
• Heavy stamped steel frame
• Single 4-ohm voice coil
• 2-inch voice coil size

User questions & answers

Question:	Will this fit under the seat of a 2014 f
Answer:	I have done it. Grease/oil is hard on the spring loaded valve and becomes sticky over time. I do bbq and teriyaki chicken regularly. Amazing pan. I've owned this one since1990Bob
Question:	Should I use a different battery or my car battery
Answer:	NuWave uses convention, IR, don't see why you want to put Turbo Pot inside, not gain of performance. Turbo Pot is designed for gas stove use. Thanks for interest in Turbo Pot.
Question:	If i buy will i receive the full package amp sub and wire kit
Answer:	Hello, it is not 15” tall. The internal dimensions of the Dutch oven/casserole pot are thus: 8.0” diameter 4.2” depth
Question:	Does the bass hit hard
Answer:	Anthony: This is designed specially for gas stove which is only 30% efficiency. it is not recommended for electric stove. If you have a gas stove at home, Turbo Pot is for you. Thanks for interest in Turbo Pot!

Product description

In the pursuit of audio perfection there are few subwoofers that can rival the quality and performance of the Boss Audio D12F 12-Inch 1000-Watt Shallow Mount Subwoofer with included shallow box enclosure and amplifier kit. This 12-inch car audio subwoofer features a max power handling of 1000 watts and a RMS power handling of 500 watts for cranking up the tunes. This subwoofer also includes a poly-injected metallic cone with foam surround, a 2-inch aluminum voice coil and a mounting depth of 3-7/8 inches. Get ready to turn your ordinary vehicle into the ultimate bass machine with the help of the Boss Audio D12F 12-Inch 1000-Watt Shallow Mount Subwoofer. Load this subwoofer into the included box enclosure for a perfect fit and some of the richest, deepest bass out there. With the included 1100-watt monoblock class A/B amplifier and wiring kit, you'll have everything you need to take your car audio to that next level.

• Subwoofer
• 1000 watts max power; 500 watts RMS power
• Single 2-inch aluminum voice coil
• Sensitivity: 95 dB
• Frequency response: 28 Hz-2 kHz

User questions & answers

Question:	Does this item fit for my 2007 honda civic dx factory radio. ask cuz i don't want change my factory radio
Answer:	We typically make about 4 cups at one time. It takes about 20 to 25 without soaking. Soaked beans ate faster.How this helps.Bob
Question:	Do you know if this will fit behind the rear seat in a 05 chevy silverado crew cab
Answer:	The lid truly is self-cleaning, so no need there. Mine is shiny after years of use. Occasionally I wash the base in the dishwasher and it works well. As I recall, hand-washing is recommended, but doing this has not caused any damage in mine.
Question:	fit 2017 camaro with factory radio
Answer:	I ordered this one for my son. However, I have the same pot with 2 handles which was discontinued with this one as the replacement. I measured mine which is 9.75 inches across and 3 inches high. This matches the dimensions displayed on Amazon for this pot. The capacity is 2.5 quarts. I own 11 pressure cookers, 10 are Kuhn Rikon. They are all fabulous to cook with. I use this one (smallest of the 11) as a rice cooker or for smaller meals.

Product description

BOSS Audio Systems CUBE8 Car Subwoofer and Amp Package – Built-in Amplifier, 8 Inch Subwoofer With Passive Radiator, Remote Subwoofer Control

• Built-in Amplifier - A built-in 400 Max watt amplifier powers the 8” subwoofer
• Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear
• Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”
• Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the CUBE8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Product description

BOSS Audio R1100MK Car Amplifier and 8 Gauge Wiring Kit – 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Monoblock, MOSFET Power Supply, Remote Subwoofer Control

• Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
• Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
• Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

User questions & answers

Question:	Can you shut off the badge lights
Answer:	Not to my knowledge. Not unless you open it up and disconnect the power line feeding the light.
Question:	Por que tan caro el derecho de exportación
Answer:	lo traje a bogota colombian no por el servicio de mensajeria de amazon por que sale muy caro lo traje por un casillero virtual que ofrese la emresa 4-72 y salio por como por 30 dolares
Question:	Quiero una pero que sea de bajo 2000 Wats
Answer:	Ayuda mucho buscando el real sonido
Question:	Is these good for a Subaru tribecca 2007.? I will use 400 watts speakers
Answer:	Yes should work fine

Product features

Let The BASS Take You To Another Place

Enjoy clear sound with the BOSS Audio Riot R1100MK Monoblock Class A/B Amplifier and 8-gauge wire installation kit. With 1100 Watts Max Power and MOSFET power supply, this 4-Ohm Amplifier provides clean sound to give your music an extra boost. The included amplifier installation kit gives you everything that you need to bring power to your subwoofer. Riot amplifiers are great for enhanced sound and performance for all 12V applications at an affordable price.

MOSFET Power Supply

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Class A/B

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

**We are an Authorized Boss Dealer!** 1 Buy = 2 Subwoofers! This subwoofer delivers 2100 watts at max power, providing deep bass and loud crisp sound without any distortion. It features a dual 4-Ohm voice coil, that sits in a poly injected cone. It has power handling capability of 1050 watts RMS as well and this subwoofer is equipped with competition style binding posts. Plus it has a mounting diameter of 10 inches and a depth of 6 1/2 inches. @[video](XVqvqlnTLsg) ![alt text][1] [1]: https://www.vminnovations.com/sys/resource.ashx?guid=6088617e844b4420a69def16beba86bb

• NEW BOSS P106DVC 10" 4200 Watt Car Subwoofers (Pair)
• 2100 Watt MAX (4200 Watt PAIR)
• 1050 Watt RMS (2100 Watt PAIR)
• DUAL 4 Ohm Voice Coils
• Poly Injected Cone

User questions & answers

Question:	Sounds like you can blow these out by under watting them from the reviews. What’s the minimum watt amp required for these
Answer:	Hard to say I put mine in the back of a 1985 Toyota sr5 so IDK if it will fit in your truck sorry I'm of no help :(
Question:	Is it okay to remove the plastic covers around the magnet only wato get them to fit inside my box which goes in 2015 Ram 1500 underneath the backseat
Answer:	Yes it should fit behind the seat of the truck if it's behind my back seat just right
Question:	Would 6 of these or 2 q power super deluxe 15's be better on 6000 watts
Answer:	Yes, the control knob is included with the amplifier.
Question:	Are they good in sealed or ported box
Answer:	You can find detailed specifications, as well as dimensional drawing and installation/care manuals, on our official factory website. If you have any questions, you can always contact our Technical Department at (718) 236-1570 opt. 2