12 best amazonbasics dslr accessories

Product description

An Amazon Brand

• exterior measures 11.75x8.75x14.5inch
• Product Dimensions :11.75x8.75x14.5inch

User questions & answers

Question:	Deluxe Back Pack 200EG
Answer:	Without a doubt! :/
Question:	Can I fit a 13 inch tablet PC in the front pouch
Answer:	Yes, sort of. Both sides have a mesh pocket at the bottom with the standard elastic-type band at the top (water bottle holder), and then 2/3rds of the way up on each side is a heavy strap sewn to the side of the bag. It would be perfect except that the straps are stitched to make fairly small loops, so you can't fit a tripod between the strap and the side of the bag. (My thumb fits through the center one -- my index finger fits through the outer two). You could pass a velcro strap or tie through to secure the top of a tripod, but that strap would naturally be oriented up and down, along the height of the bag, where you'd really want the strap oriented the other way, across the width of the side of the bag, to secure a tripod.
Question:	Is it water proof
Answer:	Yes, this camera backpack comes with several padding to customize zone to fit gears, it's large enough to fit a dslr with a battery pack. Claire EnduraxPhoto
Question:	Can you fit a MacBook in this bag along with all the camera equipment
Answer:	I like hard shell type cover and design

Product description

An Amazon Brand

• Store, carry and protect your camera equipment
• Slot for iPad Mini, Google Nexus 7, Amazon Kindle Fire

User questions & answers

Question:	What is the interior dimensions
Answer:	10.5" x 5" x 6"H
Question:	What would you say is the max amount of weight you would carry in this thing and not feel like your gear was in danger
Answer:	Not sure of the amount of weight. I carried a small video camer with its charger & cord. Larger digital camera with a lot of rechargable batteries as well as the battery charger. My kindle fit in the slot behind the main compartments plus all my memory cards that were in a zippered pouch. I'm sure I had more stuff in there just can't remember. Everything was very secured from rolling around & safe from touching each other with the dividers that are included. Plus it was not at all heavy from all this either.
Question:	Will this bag be too big for two Panasonic M4/3 cameras with attached lenses and couple of other lenses
Answer:	This bag is not overly large. Two Panasonic Lumix G5's or G6's would fit fine. Especially if you have the pancake lens. I have a Panasonic Lumix G5 with the 45-175mm Power Zoom lens attached to the camera and the 14-42 Power Zoom stored in the side pocket. I have enough room for the Panasonic Lumix FZ200 superzoom if I rearrange the adjustable padded dividers. There is room for two or three more lenses. This bag is THE BEST camera bag I have ever used or seen. It is very high quality and padded well. I will never change camera bags to a different model. I lost the use of my left hand and this bag is the only one I have found that I can easily use with only one hand. I have a big backpack style bag for my old Nikon equipment but it is way too big and awkward. This bag is perfect for the 4/3rds system cameras. I am sure you will love it if you buy it.
Question:	I have a Canon T3i, 18-55 mm lens, 55-200 mm lens, 420EX flash, two batteries, charger. Anyone care to guess if this will all fit? Thanks
Answer:	It has a lot of room and all that will fit easily! I have a Canon T5i, 18-55 mm lens, 55-300 mm lens, 3 smaller lenses, extra battery, filters, cleaning clothes, charger, tripod remote and some other smaller accessories and they all fit without any problems! Still had room left!

Product description

An Amazon Brand

• Lightweight tripod with adjustable-height legs and rubber feet
• Compatible with most video cameras, digital cameras, still cameras, GoPro devices, smartphone adapters (not included), and scopes.
• Recommended max load weight is 6.6 lbs (3kg) for optimal performance
• Weighs 3 lbs; Extends from 25 inches to 60 inches when center post is fully extended; Carrying case included
• Two built-in bubble view levels and 3-way head to allow for tilt and swivel motion; portrait or landscape options
• Quick-release mounting plate helps ensure fast transitions between shots

User questions & answers

Question:	Which is the minimum height it has
Answer:	The minimum height is 24 inches.
Question:	I want to purchase an additional quick release plate to match this product. Is this possible
Answer:	I just received the 60" tripod and with it I ordered the ARMRA version of the quick release plate. It fits fine. No filing of edges required. Or at least, the one I received fit just fine. http://www.amazon.com/gp/product/B06XJ38YKG/
Question:	will this tripod work with any camera oR certain models
Answer:	They're pretty much all the same. There are some devices (cameras, etc.) which do NOT have the quarter inch, 20 threads per inch socket on them. Usually "pro" equipment has a three-eighths, 16 TPI socket. So unless your device is really expensive, chances are really, really good this is what you need.
Question:	can i get
Answer:	No, you cannot order 30, but you can order 03. Just set the quantity while checking out.

Product features

Lightweight Design

The lightweight Amazon Basics tripod can support most cameras up to 6.6 pounds and features a quick and easy set up for convenient on-the-road use.

Adjustable Height

The tripod’s lockable legs can extend from 20 to 48 inches and include a center post that can be cranked up for a total height of 60 inches.

Built-In Levels

Featuring built-in levels at the base and camera plate as well as stabilizing, non-slip rubber feet, this tripod helps you achieve the perfect shot.

Includes Carrying Case

Easy to collapse and transport, the 3-pound tripod includes its own zippered carrying case with adjustable shoulder strap.

Product description

An Amazon Brand

From the Manufacturer

AmazonBasics

• Perfect for Fixed Zoom and Compact System Cameras
• Separate side pockets for batteries, cables or lens caps; Should Strap Included; Internal pocket for SD cards
• Internal Dimensions: 6" x 3.1" x 4" (LxWxH)
• External Dimensions: 6.7" x 3.4" x 6.3" (LxWxH)
• This bag will not fit SLR Cameras such as the T3i, D3100
• Ships in Certified Frustration-Free Packaging

User questions & answers

Question:	Hello, Is this bag good for Nikon p
Answer:	not happy with this bag, cant use it. its to small
Question:	Does this case have a belt loop in the back so you can attach it to a belt around your waist
Answer:	Yes, it does have a belt loop.
Question:	can I use with the Canon SX50. What size in inches
Answer:	The SX50 fits, but barely. It is very difficult to get the camera in and out. I ended up buying Jet Black VG Laurel DSLR Camera Carrying Bag with Removable Shoulder Strap for Canon PowerShot SX50 HS Digital SLR Camera by Vangoddy.
Question:	Now I'm worried my camera wont fit in this bag. Why doesn't Amazon put the measurements of items, so frustrating
Answer:	Actually it does list the size in the 'Product Description' it lists the case as 6.5" x 3.9" x 6.9" but that is exterior dimensions not interior. I measured mine for you and the inside is about 5.5" x 5" x 3" so it will take a small to medium sized camera. My FujiFilm Finepix HS50EXR has a large body like an SLR so it needs a larger case. I agree that Amazon does need to reevaluate their recommendations though as this case, as another reviewer said, is recommended by Amazon for my camera during the purchase process and it's much too small. Hope this helps.

Product description

An Amazon Brand

• Adjustable-height tripod made of lightweight aluminum; weighs just over a pound
• 3-way head allows for tilt and swivel motion; portrait or landscape options
• Quick-release plate helps ensure fast transitions between shots
• 3-section, lever-lock legs for easy height adjustments; zippered storage bag included
• Measures 16.5 inches (collapsed); extends up to 50 inches
• Not recommended for use with heavy, high-end DSLR cameras (total equipment weight should not exceed 4.4 pounds)

User questions & answers

Question:	Does any iPhone adapter work for this tripod? I have an iPhone 6s
Answer:	It would need to have the 1/4" threads on the iPhone adapter, this one will work: https://www.amazon.com/dp/B06XJFCD8L
Question:	My plate broke .. where can i get an extra one
Answer:	Yes, you can buy that part, it is called a quick release plate, and one that fits it can be found here: https://www.amazon.com/dp/B083613WCT
Question:	can this hold a nikon l340 and a sony hdr cx
Answer:	I'm not sure what size they are but it held nikon dl3100 just fine. It's basic but everything tightened up nicely. The husband sends to think we need a stronger one but I'm ok with this one. Hope this helps
Question:	Does Amazon sell spare quick release plates for this tripod
Answer:	You can buy spare quick releae plates for this tripod here: https://www.amazon.com/dp/B083613WCT

Product features

3-Way Head

Get the perfect shot with the tripod’s smooth tilt mechanism and explore panoramic possibilities with 360-degree swiveling. Turn knobs to secure.

Quick-Release Plate

A quick-release mounting plate makes it easy to remove your camera from the tripod, helping to ensure fast transitions between shots.

Adjustable Height

The tripod's legs can be individually adjusted as needed or all 3 can be raised to the full height of 50 inches. Includes rubber feet for stability.

Lightweight Design

Made of strong yet lightweight aluminum, the tripod transitions effortlessly from one spot to another and transports easily. Includes carrying case.).

Product description

An Amazon Brand

• Compatible with most SLRs with a zoom lens attached (up to 110mm)
• External Dimensions: 6.9" x 6.3" x 9.0" (LxWxH)
• Internal Dimensions: 6.5" x 5.9" x 7.5" (LxWxH)
• Three compartments for accessories, with 2 dedicated slots for SD memory cards
• Water-proof EVA base protects your camera and helps it stand

User questions & answers

Question:	Will it hold my lumix fz
Answer:	I don't know since I'm not familiar with your camera. It holds my Nikon D7200 with an 18-300 lens attached. No room for anything else, but it does have a zipper pocket to hold extra batteries and SD cards.
Question:	would the water penetrate inside if its raining heavily
Answer:	It seems pretty water resistant. I'm sure it would protect the camera in a quick shower. It zips around the side near the top. So, the top is one piece, but in a protracted hard rain or if you dropped it in the water, I don't think it would give adequate protection. It is not waterproof.
Question:	I am having a Nikon D3100 with a 18-55 and also a 55-300 lens with me. Will this bag carry both my lenses at the same time
Answer:	However, my T3i with battery grip and 55-250mm lens fits snuggely.
Question:	Will this attach to a belt at my waist
Answer:	Case Logic DCB-306 SLR Camera Holster has a belt loop. $19.00 at Amazon.com

Product description

Power Management: Switch to the ON the flash will start charging (the charging indicator is dim).

• Vertical Rotation Angle: 0~90 degrees, Horizontal Rotation Angle: 0~270 degrees; Note: Don't support TTL and the camera menu setting Function
• Compatible with for Canon Nikon Panasonic Olympus Pentax Fijifilm and Sony with Mi Hot Shoe cameras，like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500 (NOT compatible with Canon EOS Rebel SL3/250D，Rebel T7/1500D 2000D，Rebel T100/3000D 4000D）
• Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim)
• For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
• Red charging indicator lamp flickers in every 1s; it indicates low battery; The flash unit has 8 steps of power output control which indicated by 8 pieces of LED

User questions & answers

Question:	Is there a way to power this via a DC wall adtpater instead of batteries
Answer:	There is a side plug for power but the power cord is not included.
Question:	Will this work on a Canon T6i
Answer:	Yes. It doesn't work with some T7 because some early T7 didn't have the center pin in the hotshoe. T6 and newer T7 with the center pin will work
Question:	Why does it turn my pictures white on my sony a
Answer:	The Sony A7 has an advertised flash sync speed of 1/250 of a second. I don't own one but I've seen posts suggesting that some folks struggle to get it above 1/60th of a second. So when you use your flash, your camera may be forcing the shutter speed down to the maximum flash sync speed (1/250th or 1/60th of a second) WITHOUT OTHERWISE ADJUSTING YOUR EXPOSURE. So, say you're shooting outside on an overcast day and you want to use a fill flash. Without a flash maybe you'd be shooting at 1/1000th of a second or faster. With the flash you'd expect to shoot FASTER but, because of the slower flash sync, you're shooting slower. That slower speed means more light and that gives you a white image. To compensate, either use a filter to dim the entire scene or look into a camera with a faster flash sync speed. Unfortunately, faster is more expensive.
Question:	Can this flash be fired by the Canon 60D internal flash control off camera
Answer:	Yes. The 60D uses the Canon E-TTL flash system which fires a pre-flash to test exposure. You can set the TT560 to ignore this pre-flash. You won't get flash metering control via the camera, but it can trigger these flashes off camera. However, my own testing shows this flash only outputs 40% of the claimed power, so be aware of that issue as well.

Product features

Neewer TT560 Camera Flash Speedlite

• Note: TT560 flash Don't support TTL and the camera menu setting Function
• Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim)
• For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
• Red charging indicator lamp flickers in every 1s; it indicates low battery; The flash unit has 8 steps of power output control which indicated by 8 pieces of LED

• **𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁** 𝗕𝗮𝘀𝗲 𝗦𝗶𝘇𝗲 - 𝟭 𝟯/𝟰" (𝟰𝟰𝗺𝗺 𝘅 𝟰𝟰𝗺𝗺 𝘀𝗾𝘂𝗮𝗿𝗲) - The tapered square base that fits into the tripod measures 1 3/4” (44mm) across both directions – this is what fits into the opening mount of the tripod head
• For use with Amazon Basics 60-Inch Silver Tripod, and only certain models of Ambico, Velbon, Ravelli, Sunpak, Targus, Davis & Sanford Vista Explorer 60”, Sony, Zomei, Opteka, Dynex, Polaroid, Vivitar and Takama tripods; See product description for complete list of compatible tripod models
• QR release plate mounts to the tripod mount allowing you to attach a camera, or cell phone tripod adapter, to a compatible tripod head quickly and easily
• Extra QR plates allow you to conveniently swap out more than one camera or device with the same tripod
• The DaVoice quick release plate QB-4W features a metal pin and a high-quality metal thumb screw, unlike other brands. No tools required to tighten the screw

Product features

DaVoice Tripod Quick Release Plate

.

** SEE FULL COMPATIBLE TRIPOD LIST BELOW **

The tapered square base that fits into the tripod base is 1-3/4" x 1-3/4" (44mm x 44mm) dimensions on the bottom (that fits inside the opening in the mount head of the tripod). Has 1/4 inch Camera Mounting Screw that fits most cameras and camcorders and cell phone tripod adapters. QR plates attach to the tripod mount on your camera and allow you to quickly and easily attach and detach your camera or device from a compatible tripod head.

COMPATIBLE TRIPOD LIST - 1-3/4" (44mm) is a Camera Tripod Mounting Plate for:

• AmazonBasics 60-Inch Lightweight Silver Tripod ONLY (DOES NOT FIT the 50-Inch rose gold version)
• Ambico V0555, V0556 and V0557 Non-Fluid Head ONLY
• Davis & Sanford EXPLORERV Vista Explorer 60” Tripod
• Digital Concepts TR-60N Tripods (OLDER, 1st Generation ONLY, PLEASE MEASURE) Also fits TP-TR66 Tripods
• Dynex 60" 60L Tripod model DX-TRP60 (DXTRP60) Tripod UPC # 600603110931
• Opteka OPT7000 74-inch Tripod
• Polaroid 72" Tripod, PLTR72, PL-TR72, PLTRI72, PLTRI72S, PLTRI75 Tripods
• Ravelli APLT4, APLT6 Tripods/Monopods
• Sony VCT-VPR1, VCT-D580RM, VCT-D640RM, VCT-D670RM, VCT-D680RM, VCT-R640, VCT-60AV, VCT-80AV Tripods
• Sunpak Platinum Plus 5858D 5858DLX 6630LX 6630DX 6630DLX Tripod (3rd Generation ONLY - PLEASE MEASURE carefully as there were 3 DIFFERENT models labeled 5858D and this quick release plate ONLY FITS THE NEWEST VERSION - UPC# 090729611410, 5858DLX UPC# 090729613278) Replaces Part # 620-752 / 620-758 / 620-752 - Also fits Sunpak 2001UT (Black Tripod ONLY, DOES NOT FIT the Champagne Colored 2001UT Tripod, which takes our 35mm plate instead)
• Targus TGT-58TR and TG-6660TR Tripods (TGT-BK58T, TG-58TR, & TGT-66TR, TGT-58TR-QRP, TGT-BK58T-QRP, TG-6660TR-QRP) AND Targus MX2000P (IT MUST say MX2000P in the tripod head opening where the quick release plate goes, Fits the QRP-CP-10 Panhead - Replaces Part # QRP-CP10 - DOES NOT FIT MX2000 - PLEASE MEASURE) and fits Takama 61" Tripod
• Velbon CX-404, CX-430, CX-440, CX-444, CX-460, CX-460mini, CX-470, CX-544, CX-570, CX-590, CX-690, CX-888, CX-mini, DF-10, DF-10MF, DF-10ML, DF-40, DF-50, DF-MINI, Maxi 34, T-3500, 5000, V5000 (DOES NOT fit S5000) UP-4DXII, Videomate 400, 404, Videomate 504 Tripods - The QR shoe is also designed to be used with the Velbon PH-249Q and PH-259 Pan Head.
• Vivitar TR-75, VPT1200, VPT2400, VPT3600, V2200GX, V2400GX, V2800GX Tripods
• Vivitar VPT120SE, VPT240SE, VPT360SE Tripods - SE Models ONLY - Replaces Part # QR2 / QR3 NLA (if you see two 'notches' in the tripod head opening where the plate is inserted, this is the WRONG plate.)

Product description

Description:

PLEASE NOTE: THIS TRIPOD CAN NOT HOLD A TELEPHOTO LENS OR OTHER EXTRA LONG CAMERA LENS

Our triopds are made of aluminum and ABS environmental plastic,working heigh is 18.5"-55"/47cm-140cm,2.55 lbs / 1.16 kilograms,,light&compact&portable. Tripods are designed to use indoor and outdoor stably,fit Canon, Nikon and Sony DSLR Cameras, taking accurate panoramas pictures horizontally and vertically .

ABOUT US

“Focus on photograph, to be professional “ is our slogan, and also our goal. We are the big manufactures in producing the tripod for lots of famous brands ,we promise you that the tripod you buy is in high quality and a good price,we care your felling and using experience,we’ll reply your messages as soon as we can.

Features:

The 3-Way Head.

4-section legs and height adjustment buckle

The Quick-Release Plate

The Bubble Level

Handle for carry

Lifting crank

360 degree elastic knob and vertical shooting knob

180 degree tilt handle

Multifunctional hook

Specifications:

Model:TA-11

Material: Aluminum alloy and environmental protection ABS plastic

Head type:Head type: 3-Way Head

Folded length: 50cm / 19.7in

Tripod max height: 140cm /55in

Column quantity: 4 sections

Load capacity: 2kg / 4.4pounds

Item weight: 1.16kg / 2.55pounds

Package List:

1*Camera Tripod

1*Carry Bag

1*User Manual

• [Adjustable and portable]match your different shooting needs with 4-piece legs and an adjustable height buckle 2.55 lbs / 1.16 kilograms, light but durable.;with a carry bag & handle for carry, convenient for outdoor.
• [amazing design] The quick release lock make it easy and quickly to set the tripod, fit Canon, Nikon and Sony DSLR Cameras.Multifunctional hook with additional weight can lower the center of gravity ,make it more sturdy and less prone to vibrations . universal horseshoe foot pads provide stable support on uneven terrain.
• [excellent using experience] taking accurate panoramas pictures horizontally and vertically by 360 degree panning and titling ,built-in bubble view levels .vloger / youtuver/influencer can take professional videos and pictures all by yourself in any time&any places ,without impatience& embrassment or bad pictures form others.
• [material and height] Aluminum alloy Tripod-The leg of this tripod is made of high quality aluminum and ABS environmental plastic,Folded only 19.7"/50cm, the working height is 18.5"-55"/47cm-140cm
• [Good price and quality]we are a big manufacturers that a lot of brands are our clients,which means you can buy the same good products in a lower price,and we will reply your messages as soon as we can.

User questions & answers

Question:	will tripod polam-foto 55 work with fambrow camera
Answer:	It's not as strong at maximum pressure as my past Toto Washlets, but I couldn't use the Toto's max pressure without concern for damaging delicate skin. The SE400's maxumum pressure is adequate for me.
Question:	Does the TA-12 come with an vertical hand-crank or is it a knob instead
Answer:	The Brondell Swash bidet seats are some of the only bidet seats where you're able to sit on the lid (under the weight limits shown in the owner's manuals). Since Brondell is a U.S. company they designed the lid to be sittable, seems only in North America is that "a thing" as most Japanese and Chinese bidet seat manufacturers don't design their bidet seats with that in mind.
Question:	Does this have a remote
Answer:	Yes, it does. Gentle-closing seat & lid.
Question:	how much wieght does it support
Answer:	See below for static weight capacities: Top - 40 lbs. Middle Shelf - 20 lbs. Drawer - 15 lbs. Cabinet - 25 lbs. Leaves - 15 lbs each Side shelves - 35 lbs.

• This tripod has an aluminum and plactic build. Measures 20 inches (collapsed); extends up to 55 inches, weighs: 2.6 pounds, load: 11 pounds(least).
• Easy to store: PT55 compact tripod fits perfectly into the provided carrying case for safe storage.
• 3-Way pan head: 360-degree swivel function. Double holder for optional Panhead. Keeps your camera safe by remaining steady.
• Quick-release plate: attach and detach your camera in seconds. It makes fast transitions between shots and quickly moving from spot to spot possible.
• 4-Section, lever-lock legs: with the four-section lever-lock legs, can effortlessly accommodates custom set-ups in uneven terrain when you needed to frame the shot just so. The center is gear driven to extend, and rubber feet help ensure stability on different surfaces.

User questions & answers

Question:	What is the material of the tripod
Answer:	Materials used in the construction of this tripod include aluminum and engineering plastic which make this tripod light and easy to carry. Aluminum is light but very stable. The plastic is hard but also strong. Those high quality materials surely make this product light and durable.
Question:	What is the material of the tripod
Answer:	The legs seem to be some kind of aluminum. The rest plastic.
Question:	What is the maximum height
Answer:	Lolz, this is kinda strange and coincidence? I had similar question. After purchase, the max height for the tripod is 55 inches. However that doesn't consider your device for the measurement. The tripod has a good weight so it's very stable some lightweight tips over if u put a good sized camera ontop. Hope it helps!
Question:	is this tripod sturdy
Answer:	Yes, The tripod is sturdy when legs are fully extended. It also has the hook that you can hang your camera/video bag，it helps make the tripod even more stable. I'm very happy with the Tripod.

Product features

MACTREM Papuma PT55

Material: Aluminum alloy tube and plastic constructions

PTZ type: Panoramic Head

Maximum height: 1400mm / 55.12inch

Folded length: 50cm / 19.7inch(with panhead)

Tripod max height: 150cm / 4.92ft

Load capacity: 5kg / 11.02Lbs

Weight: 1.2kg / 2.61Lbs

Package Content:

1 * Mactrem Papuma PT55 Tripod

1 * Carrying Bag

• The weight of the tripod (include the ball head) is only 2.99lbs,much lighter than 4 cans drinks(300mL). After being 180° reflexed,the folded height is only 18.1'' (460mm),smaller enough to help you a convenient travel.
• The tripod combines practical and portability factors,with the maximum height (without center column) of the most stability is 52.4'' (1330mm),providing sufficient stability and shooting height as far as possible; The max height is 62'' (1560mm),making standing shooting easier and the min height is 16.1'' (410mm) to meet various shooting environment and photographic needs.
• With powerful and quick flip leg lock, only use one hand can open and close all the buttons in a few seconds. It's very easy to use, saving you more time and can more focused on enjoying the shooting.
• The spring self-locking tube angle adjustment knob, only need to press, release, so that can quickly adjust the angle of the three tripod tubes.
• Ball head (28mm large ball) ensure the stability of the cloud platform; The non-oil damping new design allows the camera to rotate smoothly and accurately; With a 360-degree scale at the bottom of cloud platform, it's easier to take panoramic photos and give more stunning effects than the ultra wide angle lenses.【NOTE】For camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance.

User questions & answers

Question:	I am looking for a 150 mm or 200 mm quick release plate for this to off set my nikon coolpix p1000. Is there any available
Answer:	Hello , maybe the ASIN B074M5LHZ1 COULD HELP YOU https://www.amazon.com/Concept-Camera-Release-Mounting-TM2534T/dp/B074M5LHZ1/ref=sr_1_1?ie=UTF8&qid=1546826960&sr=8-1&keywords=KF31.004
Question:	Is the ball itself plastic? Many say it is. Thanks
Answer:	The ball may be plastic, I have had no reason to disassemble the ball head. Considering the low cost of this tripod, I find it works well.
Question:	How well does this tripod work for astrophotography where I need excellent stability
Answer:	Not too familiar with that kind of photography, but this is a great tripod. Very well constructed with smooth but stiff joints. Very stable no slop at any joint. It will last a long time but if it ever does wear out I will be purchasing this same one again
Question:	Will this support 5-6lbs
Answer:	It will support it, but will creap if it’s mounted at an angle.

• LENS ATTACHMENT: Easily screws on to the front of your lens, and instantly expands the field of view for breathtaking wide-angle photography. Features a detachable macro lens for extremely high-resolution close-ups of small objects.
• LENS COMPATIBILITIES: Popular 58MM Lens models including Canon EF-S 18-55mm f/4-5.6 IS STM, Canon EF-S 55-250mm f/4-5.6 IS STM, Canon EF 75-300mm f/4-5.6 III USM, Canon EF-S 18-55mm f/3.5-5.6 IS STM, Canon EF 85mm f/1.8 USM, Canon EF 50mm f/1.4 USM, Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED VR, Nikon AF-S NIKKOR 50mm f/1.8G, Nikon AF-S NIKKOR 50mm f/1.4G, Olympus M.Zuiko Digital ED 40-150mm f/4-5.6 R, Panasonic Lumix G X Vario 12-35mm f/2.8 II, Fujifilm XC 16-50mm f/3.5-5.6 OIS II
• CAMERA MODELS: Canon EOS Rebel T7 T7i T6i T6 T6s T5i T5 T4i T3i T100 SL3 SL2 SL1 90D 80D 77D 70D 1100D 700D 650D 600D 550D 7D Mark II 6D Mark II 5DS 5D Mark II 1D Mark II M3 M5 M6 M10 M50 M100 M200 R RP
• NOTE: PLEASE VERIFY YOUR CAMERA'S LENS THREAD SIZE BEFORE ORDERING. This Wide-Angle is compatible with 58MM lenses only. Lens sizes vary regardless of camera brand or model. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a ''Ø'' (diameter) symbol. For example: Ø58 = 58mm lens thread size.
• PREMIUM CUSTOMER SERVICE: Backed with DIGITAL GOJA 90-Day 100% Satisfaction Guarantee

User questions & answers

Question:	This product fits to my nikon D3300. My question is wide angle / macro len always go together attached to my 52mm len
Answer:	Marinco also sells a 4" SS Day.Night Solar Vent which should be available on Amazon.
Question:	What is the difference between this lens and the Nikkor expensive ones
Answer:	Easily. After removing the three mounting screws, you pry up the photocell and can access the C cell battery.
Question:	Does this product blurs the sides of the frame when you zoom out
Answer:	The piston appears too long when you first put it together. Manually open the opener and the length increases. You should be able to get it in for there.
Question:	stupid question but...you add this on to an existing lens, correct? I am a newbie
Answer:	You can purchase cylinders and replacement parts directly from us. Agriculture Solutions LLC www.agriculturesolutions.com