13 best rca coax splitters

Product description

The RCA Two Way 3Ghz Bi-Di Splitter splits a single incoming coaxial signal into two outgoing signals. It is designed with high grade circuitry for minimal signal loss and maximum transfer. With dual grounded connections and a precision cast body it is an effective and durable solution. Great gold plated input and outputs gives you reliable connectivity.

• Splits a single incoming coaxial signal into two outgoing signals
• High grade circuitry for minimal signal loss and maximum transfer
• Gold plated input and outputs for reliable connectivity
• Dual grounded connections
• Precision cast body

User questions & answers

Question:	what is the db loss on the "out" on the splitter -3.5? or
Answer:	For a 4 year old, yes adequate length
Question:	Will this work with a MoCA network and is it bi-directional
Answer:	Christmas present for 7 yr old so don't know .
Question:	This is listed as 6 x 1 x 5 inch dimensions. Is that correct
Answer:	Feels like gymnastics centers beam. Firm and has nice suede cover to make it a little softer.
Question:	I want to split the signal to a DirectTV Receiver and a cable modem. Will this work, and if not does anyone know what will? Thanks
Answer:	no, the ones that fold and can be stored are made of the same fabric as the folding one, and my daughter felt that the fabric was to slick, she did not like that, but she was way past the basics, so we went with an actual AAI beam that is 8 foot for practicing at home. it is on 2x4 legs, so its right off the ground and we slide it up against the wall.

Product description

This Digital Coax Cable is made from premium quality RG-6/U with double copper braid shielding to prevent signal degradation caused by EMI and RFI interference. This cable is ideal for conducting S/PDIF digital audio signals and other high-bandwidth content but it can also be used for composite video and other line level RCA signals. This splitter features a single RCA female jack on one end and a pair of RCA male plugs on the other end. The purpose of this is adapter to split a single RCA output to send to two RCA inputs. Note that this should be used only as a splitter. Combining audio signals could result in damage to your audio equipment. The proper way to combine audio signals is through an audio mixer. Features:. Gold plated RCA male connectors. Rubber-covered molded connector housings. 97% pure oxygen-free copper conductor. Double shielded with copper braiding. 22 pF per foot capacitance. 75 ohm impedance

• This Digital Coax Cable is made from premium quality RG-6/U with double copper braid shielding
• This cable is ideal for conducting S/PDIF digital audio signals and other high-bandwidth content
• it can also be used for composite video and other line level RCA signals
• Item weight: 0.12 pounds

User questions & answers

Question:	Tv has digital audioout coaxial port &sound system has red&white rca port. i have coaxial chord. will i be able to hear tv sound through sound system
Answer:	Yes I think so. Two year old grandson enjoys this as well as older sister. You can use as many of the pieces as they can manage.
Question:	Will this work if I am tying to hook up my Vizio sound bar with 1 digital coaxial input to my blu ray player and DTV box. My TV does not have an optical connection, so I have to go thru each component. Thanks
Answer:	It rests on the floor.
Question:	Does this ship ups/fedex/usps... Important to know because in my location some are more reliable than others at delivering
Answer:	It is a dense foam. I’m 125 pounds and can stand on it without leaving a dent, but I don’t know at what weight it would begin to leave dents or dips in it.
Question:	This is a digital audio coax multi channel splitter right? for example: to combine two audio home powered systems? any advice or best approach
Answer:	Sorry, I ordered & have the blue one. Great balance bean!

Product description

This cable cost-effective, Premium Aluminium Alloy and 24k Gold Plated Tip ,high quality cable is superior to most standard audio cables, and provides a crisp, clear sound. The dual conductor is 26 AWG 90% spiral-wrapped copper shielded wire to shield against EMI/RFI interference. The connectors are fully molded to provide excellent strain relief while gold terminals ensure long-lasting, corrosion-free connections. Use this cable to split a signal, or adapt from one connection to another.

Specifications:

*Connector 1: RCA Mono Audio Female

*Connector 2: 2 RCA Stereo Audio Male

*Y cable,Color: Black ; Length: 10 inches.

package:1pcs*RCA Female to 2 RCA Male Audio cable.

• Connector：1 RCA Mono Audio Female to 2 RCA Audio Male.
• Each have one female RCA split to two male RCA.
• Material：Made of Premium PURE Aluminium Alloy 24K gold-plated connectors High Purity Oxygen Free Copper and double shielding ensure less lose of singal transporation.
• Flexible outer jacket for easy installation
• pacakage:1pcs*1rca female to 2 rca male audio cable.

User questions & answers

Question:	Is this 1rca mono female to 2rca mono male
Answer:	Yes, my 2 kids have had fun with just one set. Though I have considered getting a second just to add more peices too it.
Question:	How long is the cord
Answer:	It's durable so I don't think a little rain or dirt would make it un-usable. BUT it's a very nice little set, lightweight, it does not need much storage room, and the bright colors would dull if left outside. I'd bring it in to keep it nice. If you forgot to bring it in for a few days, no problem, just hose it off to clean.

Product description

This cable cost-effective, Premium Aluminium Alloy and 24k Gold Plated Tip ,high quality cable is superior to most standard audio cables, and provides a crisp, clear sound. The dual conductor is 26 AWG 90% spiral-wrapped copper shielded wire to shield against EMI/RFI interference. The connectors are fully molded to provide excellent strain relief while gold terminals ensure long-lasting, corrosion-free connections. Use this cable to split a signal, or adapt from one connection to another.

Specifications:

*Connector 1: RCA Mono Audio Male

*Connector 2: RCA Stereo Audio Female

*Y cable,Color: Black ; Length: 10 inches.

package:1pcs*RCA Male to 2 RCA Female Audio cable.

NOTE:This is NOT a digital audio coax multi channel splitter. Just a simple mono splitter.not work for blu ray player, didn't come with output wireless headphones

• Connector：RCA Mono Audio Male to 2 RCA Female.
• Convert the signal from a single RCA jack (mono) to dual RCA jacks (stereo)
• Material：Made of Premium PURE Aluminium Alloy 24K gold-plated connectors High Purity Oxygen Free Copper and double shielding ensure less lose of singal transporation.
• This cable is designed to duplicate a mono signal.NOTE:This is NOT a digital audio coax multi channel splitter. Just a simple mono splitter.not work for blu ray player, didn't come with output wireless headphones.
• package:1pcs*RCA Male to 2 RCA Female Audio cable.

User questions & answers

Question:	I want to use this so I have digital sound from my surround system to my computer and my tv will this work
Answer:	Yes they do
Question:	I want to use this so I have digital sound from my surround system yo my computer and my tv will this work
Answer:	H there, Thank you for your question! The rectangular logs are approximately 4.8 "W x 1'6.5"L. Best wishes, Megan

Product description

Introduce :

1.this cable cost-effective, Premium Aluminium Alloy and 24k Gold Plated Tip ,high quality cable is superior to most standard audio cables, and provides a crisp, clear sound. The dual conductor is 26 AWG 90% spiral-wrapped copper shielded wire to shield against EMI/RFI interference. The connectors are fully molded to provide excellent strain relief while gold terminals ensure long-lasting, corrosion-free connections. Use this cable to split a signal, or adapt from one connection to another.

2.this cable extensive use, Used for All RCA Audio Applications,Use this RCA Female to Dual RCA Female cable to extend any RCA signal. This cable can be used for any unit that has RCA Input or Output Port(s).

Features:

* RCA Female Connector

* RCA Female Connectors

* Extends and Splits Any RCA Signal

* Contains Black Molded Plastic Construction

* Used for All RCA Audio Applications

package:1pcs*RCA Female to Dual 2 RCA Female RCA Video Audio Cable

• Connector：1RCA Female to 2 RCA Female.
• Material：Made of Premium PURE Aluminium Alloy 24K gold-plated connectors High Purity Oxygen Free Copper and double shielding ensure less lose of singal transporation.
• Use this RCA Female to Dual RCA Female cable to extend any RCA signal. This cable can be used for any unit that has RCA Input or Output Port(s).
• Flexible outer jacket for easy installation.
• pacakage:1pcs*1rca female to 2 rca female audio cable.

User questions & answers

Question:	Need splitter (female on all ends) to connect Logitec speaker set to two computers. Need larger hole for pins on existing cable ends, will this work
Answer:	I have cox Cable and used it to split the signal and it worked great. This should do the job.

Product description

THE CIMPLE CO, A Family Company located in the USA, is proud to offer this RCA Composite to Coaxial Channel 3 / Channel 4 RF Modulator SD converter kit. This compact device allows connection of an audio/video component, especially a TV that's not equipped with an audio video jack to any existing Xbox, PS4, PS3, PC, Laptop, TV, DIRECTV, Satellite Dish, Comcast, Cable, CATV, STB, VHS, VCR, Camera, DVD, Blu-ray Player, or most any other RCA device. It can even be cascaded and used with our HDMI to AV converter, to convert an HDMI signal down to a coaxial signal. It's ideal for DVD players, gaming, digital cameras, or camcorders and mounts easily to a wall. No flipping through the remote as this component automatically switches when it detects an incoming video source. Supports RCA / CVBS / Composite / A/V inputs from 480i to 480p. Please Note, this converter does NOT support HD, 3D, or 4K. Input ports: 1 of RCA. -Please note that this unit automatically powers up when signal is present. Power ports: 1 of Jack for included A/C power adapter/transformer. Output ports: 1 of Coaxial (RF) Signal/Connection. Package Contents: 1 of Main unit (RCA to RF Modulator / Converter); 1 of A/C Wall Plug Power Adapter; 1 of RCA Cable ~5 feet; 1 of User Manual. Please Make sure to connect the power cord to A/C power and ensure that the signal is coming FROM an RCA device TO a Coax / RF Device (it does not work in reverse).

• Very sleek, small, efficient, and cost effective way to display your RCA/DVD/VCR/Game exclusive devices on regular or older televisions, record with VCR or DVD Recorders, or play in car/boat entertainment systems that use Coax / RF connections
• Works straight out of the box, is easy to hook up, and comes with all necessary cables -- just plug and play
• Wall-powered, compact and lightweight RF Modulator
• Supports Channel 3 and Channel 4, NTSC
• Includes Converter, Power Adapter, and RCA/Composite AV Cable

User questions & answers

Question:	I have a question i have a tv with hdmi and rca input no coax but my cable provider only has coax plug will this work to watch it on my tv
Answer:	Apparently it can be used for either digital or analogue signals. It is listed as a digital coax splitter. I use it with my subwoofer on my home theatre. It connects my AVR(subwoofer out) which uses a long digital coax line(w/ RCA heads) to this splitter which then goes into to the left(white) and right(red) RCA stereo inputs of my powered subwoofer. Works great. This is a high quality Y-splitter.
Question:	the rf-modulator product has stereo audio inputs, but does it output (over coax) a mts stereo signal (on ch
Answer:	Don't over think it. It will cut your signal in half, minus a slight internal attenuation (which shouldn't be that much). Consult the manufacturer for exact specs. Remember, if you are splitting into a video signal from your cable, and you already have three outputs, your signal will be roughly 1/6 8f the main signal. If you need more power, get a splitter with a built in amplifier.
Question:	I just received a tv fox antenna that only has a coax cable and my new tv does not come with coax input, will this work as an adapter
Answer:	A strong YES and YES. The 3 Ghz and Bi-Di... is the key.
Question:	Can i use this to view a dvd with rca cable on a coaxial input tv
Answer:	No. My device is behind my entertainment center, but It is about two inches wide by 1 1/2 inches high by 1/2 inch thick.

Product description

The GE Pro digital 4-way coaxial splitter splits a single incoming cable or satellite signal coming from your cable or satellite receiver, VCR, or antenna into multiple outgoing signals. The gold plating ensures a corrosion free connection. The GE Pro digital 4-way coaxial splitter is backed by a lifetime.

• MULTI PURPOSE – This digital coax splitter is designed for use with HD TV signals, Satellite TV, and High Speed Internet Modems as well as Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
• FREQUENCY RANGE – Distributes a digital signal of 2.5 GHz (5-2500 MHz) frequency range
• 4 OUTPUTS – Splits a single digital signal to up to 4 devices, balanced, and with power pass through on all ports.
• GOLD PLATED CONNECTORS – Allows for optimal connectivity, corrosion resistance, and compatible with RG59 and RG6 coax cable.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	Would this allow inserted dc on one output port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs
Answer:	this RCA adapter cable Length is : 10 inches.
Question:	Is each OUT port protected by a diode
Answer:	doubt it since the signals are different, the signal coming out of the digital port is just that, a binary signal off or on. the red and white inputs are a constant low level electrical current.
Question:	does it have a male end
Answer:	Keep in mind the female/male connections. Also, this cable will be to short for your use. You only need to be consider connecting the sound bar to your television. But since you want to connect your DTV box and Blu Ray this item will not work for you unless you use adapter or converters. In other words if the input carries the signal and then splits it to 2 connectors then you can output the audio. That is what this device was meant to do or act as a way to use coaxial digital to RCA output. HDMI best audio, followed by (SPDF) digital optical, digital coxial, and RCA. I think your best bet is a 2 in 1 digital coxial switch. Then just purchase 3 digital coxial cables. Please let me know if you have any questions. I have a sick set up. 50' plasma, ps3, pc, Apple TV, Yamaha 6 CD player, Logitect squeezebox, Dish Hopper receiver that all output to dual Z5500 speakers. I use digital coxial, optical digital, HDMI cables. I have a 4X2 optical audio switcher and 4X2 HDMI switcher and use a couple other adapters so I definetly understand the need to connect multiple devices.
Question:	what is the signal loss on this? 3.5 db or 7 db
Answer:	This item would ship out USPS

Product features

GE Digital 4-Way Coaxial Cable Splitter

Distributes a digital signal to four TVs

• 1 Input 4 Outputs (balanced)
• Distributes digital signal of 2.5 GHz : 5-2500 MHz
• Power Pass All Ports
• Compatible with RG59 and RG6 coaxial cable
• Gold plated connectors for corrosion resistance

Distribute one signal to up to four TVs

Compact for easy and out of the way installation

Works with all TVs and TV Antennas - regardless of brand

All RG59 & RG6 Coaxial Cables - all brands

• ★4K@60HZ 2X1 HDMI SWITCH with AUDIO EXTRACTOR: This 4K HDMI Switch allows you connect Two HDMI 2.0 Sources to one display device, Each input source support audio extract by the Toslink+L/R+Coaxial audio output channel. No loss of quality after you split the signal. No degradation in audio quality.
• ★ULTRA HD 4K VISUAL ENJOYMENT: Supports HDCP 2.2, HDMI2.0b,4K@60HZ, RGB4:4:4, Full HD, UHD, HDTV, Deep Color to 36bit, also back compatible with 4K@30HZ and 1080P. Max Bandwidth of 18.2Gbps. (Kindly Note: It is not compatible with DVI)
• ★HDMI ADUIO EXTRACTOR: With Optical Tolink SPDIF+L/R+3.5mm Jack+Coaxial audio out allows you extract the audio from the HDMI input source ( Like PS4, PS5, Cable box, Xbox or any HDMI device)connection to a spearker, Amplifier etc. Note: If you choose optical or coaxial audio out, you can enjoy 5.1CH or 2CH or audio copy. If you choose 3.5mm or L/R audio out, you can enjoy 2CH or audio copy.
• ★HDMI ARC ADAPTER: Supports ARC (Audio Return Channel), Extractor the Audio from TV to Soundbar or Amplifier. Connect your TV HDMI (ARC) Port to this switch HDMI Output Port with HDMI Cable, then using optical toslink, Coaxial, 3.5mm or L/R cable connect to the soundbar, Speaker, home theater, A/V receivers etc.No distortion of audio or video. All audio port support ARC.
• ★Smart Auto-Switch with Remote Control: It will automatically skip to the most recently inserted HDMI signal source,it will automatic change from HDMI source A to HDMI source B when you turned on source B and back to source A when you turned source B off.

User questions & answers

Question:	Edid doesn't seem to work. my computer still sees the connected tv as 2 channel and won't output 5.1. my bluray player works fine 5.1. any help
Answer:	yes,this cable can splitter 1to2 on the cable all ends,can will work.
Question:	is it necessary to connect something to the HDMI output to extract audio
Answer:	I use it to connect to my Bose Acoustic Wave machine and it works great. It should work for your application.
Question:	Does this bypass hdcp or hdcp passthrough
Answer:	Dear linda :yes,This is a good quality audio cable.But need to pay attention to RCA interface, it is RCA Mono.
Question:	will this inhibit dolby atmos or dolby vision? can i get the rca output&hdmi output&toslink output to work all at once with no delays and
Answer:	yes.

Product features

Enjoy your life-Home Theatre:

• It allows switching 2 HDMI inputs into 1 display, avoid plugging and unplugging the HDMI cable frequently.
• Also, it can extract digital audio embedded in HDMI and output it via Optical SPDIF and Coaxial(up to 5.1 Dobly Digital), RCA L/R and 3.5mm jack audio output 2CH stereo analog.

Three Audio mode settings:

• HDMI Audio copy: The output audio format depends on the HDMI input signal. The audio can be copied to the HDMI output device.
• 2.1CH Mode: Set 2CH to get analog stereo. Extract the digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA L/R analog/Optical SPDIF/Coaxial output at the same time
• 5.1CH Mode: Set 5.1CH to get 5.1 digital surround.(HDMI input source must support 5.1CH), Which can be extracted via Optical SPDIF and Coaxial output. It support LPCM 7.1CH,Dobly TrueHD,and DTS-HD Master Audio.

How to use ARC:

Connect your TV HDMI(ARC) Port to this switch HDMI Output Port with HDMI Cable, then using optical or Coaxial cable to the soundbar, Speaker, home theater, A/V receivers etc.No distortion of audio or video.

Kindly Note:

1. When you open ARC, then the TV remote will can't control the volume, you can only adjust the volume on your speaker/soundbar/home theater.

2. All audio port support ARC.

Wide Compatibility

This HDMI Switch with audio extractor works with HDTV, Computer, PS3/PS4 Pro, DVD player, projector, Blu-ray players, PlayStation, WiiU, Xbox one, Fire TV and Stick, Chromecast, Roku, PC, Notebook, Macbook and other HDMI capable devices.

3D Display Support

Enjoy the luxurious space in these excellent 3D games/display brought to you by your favorite.

High Resolution

Support up to 4K@60hz, HDCP 2.2, HDMI 2.0b, HDR, RGB4:4:4

High speed bandwidth of 18.2 Gbps and stable transmission of high-definition video signals with smooth and undistorted picture quality.

Product description

Overview: Tec hole Aluminum digital to analog audio converter is designed to convert coaxial or To slink digital PCM audio signals to analog L/R RCA and 3. 5mm Jack audio. It also can be used for PS3, Xbox, Blue-ray player, HD DVD, etc. which have no RCA(L/R) outputs or 3. 5mm Jack output. Features: Converts Coaxial or To slink digital PCM audio signals to analog L/R RCA ( not capable of being reversed) Eliminates the Noise when No Input Signal and Automatically Mute Supports Sampling Rate at 32KHz, 44. 1KHz, 48KHz, 192kHz / 24bit Aluminum Metal Case, Lightweight and Compact Good Anti-interference Function Makes the Sound Pure and Clear Works with Any Playback Source with an Optical (TOSLINK) or Coaxial Digital Audio Output Such as Digital and HD Televisions, Satellite Receivers, CD/DVD/Blu-Ray Players and Game Consoles Specifications: Input audio connector: 1 x To slink, 1 x RCA (Coaxial), 1 x DC/5V Port Output audio connector: 2 x RCA(R/L), 1 x 3. 5mm Jack Support Audio Format: PCM Signal-to-Noise Ratio: 105DB Separating Degree(1KHZ): 94DB Response Frequency: 20Hz~20KHz -0. 2db THD+N: -90DB Total Harmonic Distortion(THD): 10Hz~20KHz 0. 25-0. 065% Blocking Time: 0. 577Fs Sampling Rate: 32~192 KHz Bit Rate: 16~24 Bit Output Impedance: 10 ohms Consumption: 0. 5W (max) Converter Shell: Aluminum Shell Color: Black Weight: 72g Size: 55*60*24mm Package Included: 1 x Digital to analog audio converter 1 x To slink cable (Optical cable) 1 x Coaxial Cable 1 x micro USB charging cable 1 x User manual 1 x Tec hole card Kindly Note: 1. Please connect with 5V USB Power Supply 2. The adapter is incompatible with 5. 1 Channel Signal such as Dolby AC3, please set the audio output to PCM or LPCM. 3. This Converter can't adjust volume, please adjust the volume by your input device or output device.

• 【Updated DAC Converter】Ideal DAC converter converts coaxial or slink digital audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously (not capable of being reversed). Can be used with PS3, Xbox, Blu Ray Players, HD DVD, Home Cinema Systems, and more devices which lack RCA L/R or 3.5mm jack outputs.
• 【Plug & Play】DAC adapter comes with an optical cable and a coaxial cable to transmit digital or analog signals respectively - so you’re all set and don't need to buy one. Powered by (5V 1A) USB power cable(Does not come with adapter), 0.5W low power consumption. Easy to install, perfect for beginner.
• 【192KHz Sampling Rate Achieved】Techole Digital to Anglog Audio Converter actually supports Sampling Rate at 32, 44.1, 48, 96 and 192 KHz, and 24-bit S/PDIF Incoming Bit Stream on Left and Right Channels. Good Anti-Interference function makes the sound pure and clear.
• 【Multi-Point Connection】Input audio connector with one Toslink and one RCA (Coaxial) cables, DC 5V port, Output audio connector with two RCA(R/L) and one 3.5mm Jack. Supports uncompressed 2.1-channel PCM or LPCM digital audio signal output, will Not supports 5.1 channel Dolby sound.
• 【Aluminum Alloy Design】Aluminum Metal Case, lightweight, durable and heat-resisted. Gold Plated Sockets, enhance HD sound signals over long distance broadcasting smoothly. Note: Please set the connected device to support audio output and set the audio output to PCM or LPCM before use.

User questions & answers

Question:	Can i use this to take optical out from a tcl tv to my older philips receiver and play tv output through the speakers hooked up to the receiver
Answer:	As long as your Phillips is analog it should work. This box takes digital or optical and converts it to analog if you are going from optical to digital or vise versa I don't believe it's made for that
Question:	Anyone getting hiss noise when there is no input source to the DAC
Answer:	Yes, I am getting a very loud hiss when my source (desktop) turns off or when the input is not plugged into anything. Very annoying and I'll be looking for a different optical DAC
Question:	can it be used for dolby-5.1 technology? my new tv have this function
Answer:	Most DAC converters in the market only support LPCM/ PCM format, not compatible with 5.1 Channel Signal Such as Dolby AC-3/DTS. You have to set your smart TV to PCM format output each time. If you need a DAC that doesn't require TV to be set to PCM audio, I would recommend this one. https://www.amazon.com/dp/B07DVWSWLQ It supports DTS/ Dolby AC3/ LPCM/ PCM/ RAW, Can Decode Dolby/DTS 5.1CH Digital Audio into 2.0CH Analog Audio Output without Setting Audio Output Format. No need to set to PCM like other DAC, so convenient.
Question:	How long is the usb power cable? Does it go into a wall socket to provide power to the adapter itself
Answer:	The manual reads, "Please connect with 5v USB power supply." However, 5V is the USB standard for all USB ports, so you can plug the USB cable that comes with it into any device you have which has a USB port (note: all versions of USB use 5v) e.g., the you can plug the USB cable into the USB port on your TV itself or into virtually any modern gaming console. No wall socket necessary. It's purely optional.

Product features

Additional cables

Built-In Active IC Chipset

Aluminium Material

Widely Application

Product description

Mediabridge Ultra Series RCA Y-Adapter - 1-female to 2-male a simple Y-Adapter can open up a whole New world of possibilities. Connect a TV, CD/DVD player & more to a subwoofer or amplifier with left & right audio ports for a high-quality sound experience. The RCA Y-Adapter makes this easy, while maximizing signal transfer, so your audio components deliver all the performance you expect. Color-coded connectors make for easy distinguishing between polarities. Dual shielding protects against RF/EM interference. Ultra Series cables are made from premium materials for a pro-grade output. Product Features - flexible outer jacket for easy installation - gold contact, pro-grade connectors for a high conductivity connection - Y-Adapter has 1-female to 2-male RCA audio plugs - a strong metal build, meant for organizing & maintaining your audio/video network with quick access braided copper shielding, aluminum Mylar shielding, & gas-injected foam dielectric - cable is 12in in length compatibility devices with RCA connectors, like TV's, CD/DVD players, a/V receivers, subwoofers & amplifiers installation using an existing RCA cable, connect 1 audio component to the female connector, & then connect the 2 male connectors to the left & right audio ports of a subwoofer or amplifier

• This cable connects a TV, CD player, DVD player or other RCA-enabled device to the left and right audio ports of a subwoofer or amplifier.
• Split your audio components for a genuine surround sound experience. It contains a heavy-duty, yet flexible outer jacket for simple installation.
• Durably built with gold contact, pro-grade connectors for a high conductivity connection.
• The Y-Adapter has 1-Female to 2-Male RCA audio plugs. Uniquely gripped color-coded molds make for easy cable handling.
• Features braided copper shielding, aluminum Mylar shielding, and gas injected foam dielectric. Includes adjustable & reusable Velcro cable strap for easy organization & storage.

User questions & answers

Question:	What are the best 3 cable RCA
Answer:	Sorry to be so long to respond. I had to see if they still make hdmi cable to rca fittings and they do. Use this cable and you should be ok. Hopes this helps.
Question:	I would like to connect a orange digital audio rca type cable and connect the red and white to a audio in port on the back of my receiver
Answer:	Yes. Channel 3 and 4 will carry the Stereo signal.
Question:	Can i connect my jbl subwoofer cable, which only has a subwoofer input, to my home stereo amp
Answer:	Some new TVs do not have a built-in over-the-air (OTA) tuner, so if your new TV does not have a coax input it is not actually a "TV" but is instead a "monitor". Someone else recommended using an external tuner to tune OTA channels, which will connect to your TV by a non-coax connection (yellow/red/white or yellow/red/black, or maybe even HDMI for HD viewing). ...or swap the TV for one with a tuner.
Question:	Can this be plugged in to both sub preouts on receiver to a single cable feed to subwoofer? Or is that not necessary
Answer:	Yes, you can. As long as the DVD Player has the RCA (Red-White-Yellow) outputs, this will convert that to a coax for your TV.

• 【Bi-Directional Digital Audio Converter】This 2-way audio adapter allows you to convert Optical to/from Digitial Coaxial, an input selection switch can easily select either SPDIF (Optical/Toslink) or Coaxial input
• 【Audio Format】 Support multi-channel surround sound, uncompressed LPCM/PCM audio and compressed 5.1 audio including Dolby Digital (AC3), DTS to audio processor or A/V receiver with capacity of decoding audio source. The highest support 192 KHZ sampling rate. Noise-free transmission
• 【Easy to Setup】 Plug and play, no need any software and driver. Come with 5V1A power adapter (support 100V-240V input), no need to prepare by yourself
• 【Long Distance】Use Optical fiber cable loss less the 0.2Db/m, output distance is up to 30 meters (98 feet); Use the standard Digital Coaxial cable output can be up to 10 meter (32 feet)
• 【Wide Compatibility】Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port.

User questions & answers

Question:	Unlike your digital optical to analog audio converter, will the optical to coaxial digital give me 5.1 surround sound
Answer:	Hi Jon. I am not seeing a spec listing for the OD. I can say it is designed to work with a dual shielded RG59 connector
Question:	Will this model splite 1 optical in to 2 optical out
Answer:	hi, rg6 crimping f connectors. thanks
Question:	Is there any lag when using this converter? Even a small amount
Answer:	That is correct the rg6 is larger
Question:	Will this model split 1 coaxial to one optical and one coaxial
Answer:	Front of this unit has inputs for Audio, Video and S Video. The inputs are conveniently accessed from the front of the unit. Outputs are accessed on the back of the unit. Hope this information was of assistance.

Product description

Style:1 Male to 2 Female

RCA Audio Adapter Cable



Connectivity

premium 1 RCA male to 2 RCA female Y audio cable adapter allows you to

connect your home and pro-audio equipment with ease, such as a subwoofer.

This RCA adapter can be used to split a mono source into 2 signals or

combine a stereo source into a mono signal. Use this cable to connect a

mono audio source to stereo audio equipment with RCA connectors.



24k Gold Plated Connectors



premium stereo audio cables are made from high quality 24k gold-plated

connectors that resist corrosion and reduce tarnish to ensure the highest

quality audio connection. Color coded connectors to distinguish polarities.



PF Insulator

The core of the stereo audio cables are covered with polyethylene foam (PF)

dielectric insulator which greatly minimizes signal loss.



Tin-plated Copper Core

The tin plated copper core of the stereo audio cables reduces oxidation and

increases the cable life.



Specifications

Connectors:

Type: RCA

Y Adapter - 1 Male to 2 Female RCA plugs

Interface: Analog Audio



Package Includes

1 Male to 2 Female Y Adapter x1



Compatibility:

RCA Analog Audio

Subwoofers

• This cable is designed to duplicate a mono signal
• Y Adapter splitter cable with 1 RCA Male to 2 RCA Female plug stereo audio adapter extension cord connectors
• 24K gold-plated connectors resist corrosion and reduce tarnish
• Precision molded terminations and high quality.Braided shields and heavy duty, insulated.
• Copper braided and aluminum foil shielding provide cable flexibility and greatly reduce undesired EMI/RFI interference

User questions & answers

Question:	Can this cable combine left and right channels
Answer:	Hi Chriswlan, thank you for your question. Yes, each OUT port is protected by a diode. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	How long is the cable
Answer:	No, this splitter does not have a male end. All 3 ends are female
Question:	How would i use this to connect two speakers to a dj mixer with only one rca input
Answer:	If you are asking about the four-way, it would have to be at least 7 db or it would violate the law of conservation of energy. 3.0 dB loss is 50%, so a two-way splitter ideally is close to 3 dB.. A 4-way that has only 3.5 dB loss per port would be putting out more power that comes in. 7dB is a factor of four loss.

• [Excellent Sound Quality] Built with dual-shielding gold-plated connector and oxygen copper wire core making it less susceptible to outside interference, which ensure seamlessly transmit stereo audio for premium sound experience.
• [Bi-Directional] Seamlessly transmits stereo audio for high quality sound. Red/white color-marked connectors for quick, easy left-and-right hookups. RCA connectors have easy grips for plugging and unplugging while ensuring reliability.
• [Superb Fit] 3.5mm to 2RCA auxiliary stereo Y splitter connects perfectly for smartphones (iPhone, Galaxy, LG, Pixel, etc), MP3 player, Tablet (iPad, Galaxy, Fire, etc) to Stereo Receiver, Speaker, Amplifier, TV, Car and other RCA-enabled devices.
• [Incredibly Durable]10000+ bend lifespan & double-braided nylon exterior make audio rca cables adding to the durability and tangle free.
• [What You Get] JSAUX 3.5mm to 2RCA Audio Y Cable (Nylon Braided, 6.6ft/2M) and high standards of customer service.

User questions & answers

Question:	my smart tv has a 3.5 mm jack and sound bar has red & white output. Will this cable work
Answer:	I'm not sure. I didn't look bit it still works great
Question:	Will this work with my car
Answer:	It should work with echo dot 3.5 mm aux out and a/v receiver aux in.
Question:	What is the gauge of the wire in these cables
Answer:	It could work with the echo and the stereo.
Question:	What is the color difference between grey and grey
Answer:	Yes. This cable works in both directions. For your question You want to make sure your TV has the red and white RCA audio out then you can plug in the small end 3.5mm headphone jack to any stereo/amp/receiver/speaker with aux in. I use the headphone jack on my Nintendo Switch and I connect it to my stereo receiver and play on the big screen. Hope that answers your question.

Product features

Plug and Play

No software and drivers required, just enjoy the high quality stereo by simply connecting two devices with this 3.5mm to RCA cable.

Premium Sound Quality Hi-Fi Stereo Performance

Metal shell of this stereo RCA cable provides reliable performance and reducing signal loss.

Enameled Oxygen-free copper wires seamlessly transmits stereo audio for high quality sounds.

24K Gold-Plated Connector

The 3.5mm male to male stereo audio cable transmits audio in stereo format.

24K gold-plated contacts giving you the flexibility you need for your listening pleasure.

Long-Lasting Performance Design

JSAUX 3.5mm to 2RCA Cable Adds the strong military fiber, the most flexible, powerful and durable material, makes tensile force increased by 200%, special strain relief support design, can bear 10000+ bending test.