11 best cellphone car mounts

Product description

Kindly Note:

1. Not recommended to install the car phone mount on too rough or curved dashboard surfaces.

2. Peel the protective film from the suction cup bottom before use.

3. The preferable installation area for the stabilizer base should be close to the phone holder for maximum stability.

4. Let it sit for 24H after installation.

• FREE INSTALLATION & UNOBSTRUCTED SIGHT: Mpow focuses on the innovative and smarter mounting solution and blazes past other traditional dashboard car mounts. Up to 15cm/5.9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Most importantly, it can be bent to avoid obstructing display and irregular vents
• STRONG SUCTION CUP WITH STICKY GEL: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling even on rough roads. The suction cup is reusable and washable, Simply rinse in water and let air dry to restore the stickiness.
• HOLDS PHONE AND CASE COMBINATIONS: the adjustable side clamps extend from 1.8in to 3.7in, compatible with most smartphones with screens up to 6.5” and even worn its case. (Galaxy S10/S9/S8/S7/S6/J5/J3/A5/A6/A7, Huawei P20/Mate10/Mate20/honor 8X, iPhone 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus/6S/6, Sony Xperia Xz3/Xperia Xz2/Xperia Xz2 compact, Xiaomi Redmi Note 6 Pro/Redmi Note 5 Pro/Redmi Note 5/mi 8 Pro/mi 8/Mi8 Lite/mi A2/MI A2 Lite/mi A1, LG G5/G6/V30/V20 und MP3 )
• VIEW YOUR PHONE AT ANY ANGLE: The flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls. Thanks to the 360 degrees ball-head, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, either in landscape or portrait mode for convenient navigating, calling, and music in the vehicle
• BUILT TO LAST AND PROTECT: the polished surface makes the mount look sleek in your car. The heat-resistant PC and ABS materials make Mpow dashboard Phone holder sturdier than other Pure ABS mounts. The foldable holding feet allow hassle-free charging on the go. The Sponge-Padded surface and grips of the cradle prevent slipping and scratches. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands

Product features

MPOW Universal Dashboard Car Phone Mount

The quick-release button allows you to release and install your phone with one hand motion in seconds.

The side arms expand up to 94mm/3.7in wide, fits most phones such as:

Reusable & Washable Sticky Gel

The car mount’s suction cup has a coating of sticky gel that prevents air gaps from forming. To renew the gel adhesive, just rinse with water and let air dry

Assemble the Car Mount

• Step 1. Unscrew the knob;
• Step 2. Pass the knob through the ball head;
• Step 3. Tightly push the ball head into the socket of the cradle, then tighten the knob.

Package Contents

• 1 x Car Phone Holder
• 1 x Suction Cup Base
• 1 x Anti-shake Stabilizer
• 1 x Manual
• 2 x Spare Sticky Adhesives for Stabilizer

• 3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
• Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
• Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
• One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.

Product features

Reusable Suction Cup Car Phone Holder Mount

• We off the extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely.
• Use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.After that, and the car mount will work like new one.

Compatible Devices

iPhone 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4

Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 S7 / S7 Edge / S6 S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s

LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ

Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel

Nexus OnePlus 3 / 2 / X; Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.

What's in Box

• 1xSuction cup base
• 1xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• 💠【Full of Surprises Innovative Design】 TiTpKing car phone holder mount use air vent fixed fixtures and double air vent clamps design. Compatible with more air vent while have beyond imagination stability. After correct placement, no matter how complicated the road, car phone holder can firmly stay in a place without falling from the vent. Give you no interference driving environment. Extra-long arm keep a safe distance from the vent to avoid airflow interference cause phone damage
• 💠【Perfect Protection of Your Phone】 TiTpKing phone holder for car made of excellent comprehensive performance PC material. Back plate have strong protection silicone, better protecting the phone from suffer damage and scratch. Clamp arm and foot shelf has safety stable, environmentally friendly and harmless comfortable anti-slip, damping silicone pad. Back plate, clamp arm, foot shelf provide you with stable 3-point support. Phone car holder can hold your phone firmly without falling
• 💠【Double 360-Degree Comfortable Viewing Angle】 TiTpKing car phone mount double 360-degree rotated can place your phone in any orientation(horizontal, vertical, and more), and the exhaust clip can also be rotated 360 degree. This design not only brings you the best viewing angle, also let you to adjust the put into a angle(horizontal, vertical, and more) to suit air vent. Just enjoy the best driving experience
• 💠【Convenient Operation Process】 Have one-key lock and release function, only takes 0.1S to lock or release the phone. And TiTpKing optimize the cumbersome operating of pressing on both sides, TiTpKing car phone mount only needs to press one side quick release button of the with one hand to take out the phone, allows you to take out your phone easily and fast.(But we also retain the operating function of pressing on both sides, give you more option)
• 💠【Phone with Phone Case also Compatible】 TiTpKing car phone mount is compatible with all cell phones and devices between 4.0-7 inches(such as thicker phone cases, navigation, and more). But if you phone case back with a special protruding shape cannot use this car phone holder

Product features

TiTpKing's Persistence

- - The Customer is Always Right ！！- -

● TiTpking will treat everyone with the most sincere attitude, serve everyone with the most excellent after-sales service

● Whether it is design of the product, quality, every detail or other, TiTpKing all hope to do better, constantly surpass ourselves

● We will keep going. Please enjoy the innovation design brought to you by TiTpKing. TiTpKing hope everyone can enjoy the convenience brought by progress

Air Vent Fixed Fixtures

TiTpKing air vent fixed fixtures used to fix the air vent, so that the TiTpKing car phone holder can be firmly fixed on the air vent. Can better solve the problem of the phone car holder shaking at the air vent

Comfortable Viewing Angle

360-degree rotatable head will provide you with the best viewing angle, provide you with an ideal perspective. Enjoy the best driving experience

Unique Air Vent Clamp

TiTpKing 360-degree rotated vent clamp can be adjusted according to the position of the vent. Fix when adjusted to a position suitable for the vent, can be better compatible with vents and improve stability

• WIDER COMPATIBILITY: New larger Easy One Touch button and cradle allows for wider device & case compatibility.
• MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located on the bottom foot
• TELESCOPIC ARM: The improved telescopic arm now extends from 5” to 8” (as opposed to the Easy One Touch 4 which only extended to 6.5”) and pivots 225 degrees. This enables a myriad of customized viewing angles while you’re on the road.
• REDESIGNED BOTTOM FOOT: Easier to secure and adjust; simply squeeze the spring button and pull down.
• ENHANCED SUCTION CUP: Redesigned suction cup with an improved sticky gel formula that provides a stronger, lasting hold.

User questions & answers

Question:	Will the adhesive patch damage a leather dashboard
Answer:	I would assume so but it isn't very adhesive honestly I have to wet the sticky part for it to stick to my dash
Question:	Will this cradle hold iphone 11 pro? I have older version for my iPhone 6+, it's still functional & I luv it but my 11 pro does not fit it
Answer:	It fits my iPhone 12 Pro Max, easily
Question:	Is it applicable for windshield as well
Answer:	Yeap! I’ve had mine on my windshield since the day I got it and no issues at all. It’s very sturdy and hardly moves even on bumpy terrain. Hope this helps!
Question:	How wide is the cradle? (How wide can a phone be before it won't fit
Answer:	I used this for my iPhone 8 Plus with an Otterbox Defender on it (not a slim combo) and it was plenty wide enough.

Product features

Telescopic Arm

Arm pivots 225 degrees for custom viewing angles on the road

Suction Cup

Suction Cup can be restored by simply rinsing under warm water and air drying

Mount Foot & Magnetic Organizer

New Foot easily adjust to standard & large smartphones, and helps keep cords organized

What's Included

Includes Mount, Dashboard Pad and Cable Tag

• 【One Car Holder For Multiple Purposes】This clip car mount more convenient, can be used in car dashboard, sun visor, rearview mirror. Multiple purposes can provide you with more convenience and more use needs in the car.
• 【360°Rotation & 180°Tilt】The upgrade car phone mount not only support 360-degree rotatable switch between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle, , so you could see the phone screen clearly and keep secure driving rather than limited by view angle.
• 【Curved Base Design】Made with a soft, non-slip silicon pad and curved base. The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Spring buckle base cannot be shaken off, strong and sturdy.
• 【Folding Car Bracket】When not in use the car phone stand can folds flat and easily fits in a center console, glove box, or door pocket to keep it out of the way, but make you conveniently in reach when you need it.
• 【Broad Compatibility】Designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 6.8 inches, Compatible with iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Moto and More other smartphone.

• 【Tenet of TORRAS Design】Simple but Unique! THREE mounting methods applied in ONE cell phone holder, which means you can mount it on your car dash, windshield or air vent
• 【Targeted Device is ∞+】Fully considered the compatibility, the phone car holder fits all mainstream smartphones like iPhone, SAMSUNG, Google Pixel, not over yet, it works for most vehicles like Sedan, SUV, Off-road and Truck
• 【Worry-free PPP Principle】PREMIUM silicone air cushions applied on this cell car mount all around PROVIDE the best PROTECTION for your expensive cell phone, no scratches
• 【Sturdy→Sturdier→Sturdiest】Adopted the latest 17 shaping process and the Military-grade Sturdiness Test on the CAR PHONE HOLDER, 50X stronger than the normal ones
• 【Three Ones = Easy Operation】One Button & One Hand & One Second make Easy Operation happen to this CAR PHONE MOUNT and save you 365² seconds a year
• 【Latest Twist-lock Air Vent Clip】The vent clip is compatible with 99% car air vents, such universal! What’s more is if you have another TORRAS car phone mount, they’d be 100% matched
• 【Adjustable As You Wish】Adjustment makes this cell phone automobile cradle Versatile - Adjustable Bottom Foot/Adjustable Telescopic Arm/360° Rotation Ball Joint
• 【Luxury Car Phone Holder】Excellent Quality + Exquisite Appearance + Elegant Package = the Best Choice of a lovely gift for your loved ones, also a reliable phone mount for yourself

User questions & answers

Question:	This unit looks so decent but I really am having bad luck with car phone holders. Should I trust this one
Answer:	Hi. I never used the wrist attachment in fact, I don't recall getting one with the angel wings that I ordered. The harness worked great! Our granddaughter had freedom and I had freedom from worry.
Question:	Will this car phone mount work for iPhone 11 pro max with an OtterBox commuter series case
Answer:	Our twin boys thought that they were butterflies when they saw the wings. Rough and tumble butterfly boys! No signs of imasculation evident. That would be an emotion taught, not innate.
Question:	I have a ring holder attached to the back of my cell phone also with a phone case on. Will this car dock for cell phone work
Answer:	Yes
Question:	This dashboard car mount looks like a work of art. Is it sturdy
Answer:	China

Product features

Thick Phone Case Friendly

Depth of the phone holder clamp arms is 0.85”. The car mount can hold thick phone with battery case, wallet case, ring case and most phone accessories.

100% Gentle Protection

Shock-absorbing silicone applied on the back support of this car cell phone holder makes your mobile phone protected 100%. Say good-bye to scratches.

Adjustable As You Wish

Length of the telescopic arm is from 4.94” to 7.23” and ball joint is 360° adjustable, which makes it easy to adjust the car phone holder to the best eye-level.

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

• 【Two Protection Ensure PRO Heavy-duty Magnetism】1st Protection: The N52 [the most powerful of neodymium magnets] Neodymium Magnets (the strongest magnetic material in industry) has been taken to forge the little compact car mount holder. 2nd Protection: the enhanced thicker metal disc ensure the super strong magnetic attrance force whilst your driving.
• 【Double Safeguard Support Reliable Position】1ST Safeguard: Enhanced Adhensive 3M LSE base can be attached to any smooth and flat surface. 2ND Safeguard: Sturdy rubber base protect efficiently the product slide off while driving. Two is better than One.
• 【No Blocking View Promots Safer Driving】Unlike the big suction cup or air vent car mount, the size of Joyroom magnetic car mount is optimized for dash installation. Our car mount installation precludes the possibility of having your view of the road obstructed by an object on the windshield.
• 【360 Hassle Free Degree Rotation】Your phone can be rotated easily to landscape and poraits as well as anywhere in between, with the low-profile magnetic car mount. This magnet car mount allow you secure your smartphone to the dashboard firmly, keeping it in place whilst the optimal viewing angle.
• 【18 Month Worry Free Warranty & Universal Fit】With our car phone mount, you'll enjoy 18-month warranty and 12 hours customer response. This cell phone car mount is fit for all phones, include iPhone 12/12 Pro/12 Pro Max/12 Mini/SE/ 11 /11 Pro /11 Pro Max /XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / 5s / 5, Samsung Galaxy S10 / S10+ / S10e / S9 / S9+ / S8 / S8+ /Note 10+ /Note 10 / Note 9/Note 8/ S7 / S7 Edge / S6 S6 Edge / S5 / S4, LG, Google Pixel etc.

User questions & answers

Question:	Are there scanner drivers that work with Mac Catalina
Answer:	Yes. It comes with it's own cord.
Question:	Can it use a larger than 8 gb sd card
Answer:	I have not tried it. It says it is compatible with any Bluetooth device.
Question:	does it do 8x11 pictures
Answer:	Well I have an answer, s f stands for super fine and s e is for start enjoying. Your welcome
Question:	So this unit scans an existing paper photo and converts it to digital? Not just negatives but actual photos too
Answer:	I said I could answer but when I purchased nothing worked. It has a lot of bad reviews and I should of listened. Hopefully yours will be an exception.

Product features

Resolution

Change resolution by entering the resolution menu. Press the LEFT/

RIGHT button for Resolution and press the ENTER button to confirm.

14M resolution

22M resolution

Language

Change language by entering the language menu. Press the LEFT/ RIGHT button for Language and press the ENTER button to confirm. After capture, please take out the memory card from the film scanner to download the stored images from the memory card.

Connected to computer

cable to a PC, Press the LEFT/RIGHT button for USB MSDC and press the ENTER button to confirm. The film scanner will become a mass storage device and to preview or edit images on PC.

You can also press MODE button to back to main menu.

Joyroom PRO Magnetic Car Phone Mount is one of the most stable magnetic car mount.

1.Safeguard rubber.

2.Six strongest N52 neodymium magnets.

3.Surround magnetic field.

4.Retaining screw & fixed nuts.

5.Universal adjustment ball.

6. Enhanced adhensive 3M LSE base.

Super Strong Magnetic Machnism

Updrade 6 N52 magnets (80% than N48) & 4 bigger metal discs ensure Joyroom PRO be one of the most stable car mount.

Safe Navigation Everyday

Surround magnetic field, without affecting cellphone signals. Keep your hands always on sterling wheels & enjoy safe drving.

Protect Dash Surface

Enhanced Adhensive 3M VHB base can be attached to any smooth and flat surface. 3M VHB can also be removed without any vestigital.

On the phone back cover

On the phone case

Between the case and back cover

• [4 in 1 Cell Phone Holder]: Multifunctionale functions car phone holder can be mounted on dashboard windshield air vent or desk firmly. One suction cell phone holder or air vent Phone Holder feeds your different usage needs. Apply to most of cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
• [Super Viscous Suction Cup]: The suction cup phone holder uses 2-level locking mechanism, strong suction force, only need to rinse with water to restore the stickiness. On a bumpy road, turning on the road, braking or driving, the mobile phone holder can also be fixed to the dashboard Windshield and desktop.
• [Universal Cell Phone Holder]: Humixx car phone mount compatible with most phones between 4" and 7", such as iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus/ SE/ Samsung Galaxy Note S21/S21+/ S21 Ultra/ 20/ S20 Ultra/ S20/ S20+/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge, Sony, LG, Google, Sony, Nokia and all cellphones, GPS device.
• [360°Rotations & Adjustable-Arm]: Cell phone holder swivel ball head ensures 360° free rotations and arm can extend from 4.6in to 6.6in for optimal viewing angle. Prevent from blocking your view while driving, so you can ensure stability and safe driving.
• [All-Around Protection]: Phone mount uses an innovative shock-proof texture made of PU material and triangular stability. And phone holder also equipped with non-slip silicone pads to effectively prevent sliding and abrasion of the phone.

Product features

Air Vent Phone Holder

The accessory includes a vent clip that gives you more options for installing your phone. We promise to provide free lifetime replacement for suction cup & ventilation clip accessories.

Dashboard phone holder for car

The extra dashboard pad can provides smooth surface. So the car holder can stay more firmly and securely. You can also drive more safely off-road or on bumpy roads.

Mobile phone holder windshield

You can also attach our suction cup to the windshield. We use the latest material from Bayer, which not only guarantees strong adhesion, but also leaves no traces when removed.

Shock-absorbing PU Material

The shiny diamond design like brickwork is not only shock absorbing and non-slip, it can also decorate your car.

17.5 mm charging port

You can freely connect the charging cable through this opening. Therefore, loading and navigation can be carried out simultaneously.

The latest ventilation clip

You can freely adjust it and install it in the ventilation slot. Rubber coating protects the car from scratches

Powerful suction cup

The suction cup is double-locked and can be reused. Wash with warm water and dry to restore viscosity

Supports almost all mobile phones and cars

• iPhone 12/ 12 mini/ 12 pro/ 12 pro max/ SE/ 11/ 11 Pro/ 11 Pro Max/ XS/ XR/ XS Max/ X/ 8/ 8 Plus/ 7/ 7 Plus
• Samsung Galaxy Note 20/ S20 Ultra/ S20/ S20+/ M30s/ A50/ S10/ S10e/ A51/ A40/ S9/ S8/ Note10/ Note 9/ Note 8
• HUAWEI P40 lite/ P40/ P40 Pro/ P30/ P30 Pro/ P30 lite/ Mate 20/ Mate 20 Pro/ P20 Lite / P20 Pro
• Google Pixel 4 / 4xl / 3 / 3xl
• Nokia / LG/ HONOR/ One Plus/ HTC etc. Perfect for all smartphones
• Suitable for most cars like VW Golf, Polo, Tiguan, Passat. Mercedes, BMW, Audi, Ford, Skoda etc

• ▶[MILITARY GRADE STURDINESS TEST]: The 2020 enhanced TORRAS cell phone holder for car passed the military-grade sturdiness test, it is sturdier more than 10 x than normal ones. The suction cup can withstand the temperature from -20℃（-4°F) to 95℃/(203°F). It can be reusable. You can stick it on your car dash or windshield. Also, you can use it at home, it can be perfectly stuck on the desktop or wall when you study, video, teaching or listening. Completely hands-free and views-adjustable.
• ▶[EASY&REAL HANDS-FREE]: Release easily with one button, clamp fast with one hand! ▶The cell phone mount holder is suitable for all kinds of mobile phones with brand thick cases, Battery cases, and it is exceptionally sturdy to hold your phone tightly. Like iPhone SE 2020/11/ 11 Pro/11 Pro max /x/ xs max/xr/8 plus/8/7/6s plus, Samsung galaxy s20/s20+/s20 ultra 5G/note 20/10 plus/10/9 plus/9/s10/s9/a10e, Google Pixel 3a/4 XL, LG v20, One Plus and more.
• ▶[4 IN 1 ULTIMATE CAR MOUNT]: Are you not sure which installation method is better for your car? No worries! The 4 in1 car phone holder can be flexible placement! Dashboard & Windshield & Air Vent & Home, all places work perfectly! Also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences.
• ▶[2020 ENHANCED VENT CLIP]: You can screw the nut to fix the clamp freely, the tighter you screw, the sturdier it will be! Its two small arms are just enough to press against the upper and lower vent blades to lighten the load on the middle one, no damage your car. This is more than 10 times sturdier than ordinary ones. It fits perfectly for your car no matter what the thicker blades vents or vertical ones.
• ▶[WHAT YOU GET]: With the car holder for cell phone, you can a package including 1 enhanced suction cup, 1 sticky pad, 1 strong air vent clip, 1 support card, and 1 user manual. You will enjoy our worry-free 36-month experience and 12-hour kindly customer response! Note: The sticky pad just can be used once, please think twice to stick it.

Product features

TORRAS Cell Phone Holder for Car Dashboard & Windshield & Air Vent Car Phone Mount

WASH IT, THEN REUSE

Simply wash and dry naturally, then stick it to a new place, suction is as strong as before! At home, you can stick it on your desk or wall of the kitchen to assist you to study, cooking, video or listen to music/news.

2020 STRONGER SUCTION CUP

The 2021 latest upgraded suction cup can resist up to extreme weather: (-4°F/-20 ° C- 203 °F/95 ° C), and bear 45 pounds easily! It is stronger 10 x than any other ordinary ones. Also, we add a sticky pad to make it stick more firmly!

LOCK YOUR PHONE FIRMLY

The cell phone holder is so TIGHT that your phone never falls off! And the depth of the side arm is up to 0.84". All cases and phone rings, battery cases are compatible well. Also, it is perfect for the bump road, off-road or sharp turn.

You Can Also Use It at Home for...

Q1: How sticky is this suction cup?

A1: This phone mount suction cup is one of the most sticky on the market. We add another layer of premium glue on the surface of the suction cup to enhance its viscosity. Temperature resistance: -4°F(-20 ° c) - 203 °F(95 ° c). It can be used even in the heat of Florida. If your holder does not stick, it is probably defective, you can apply for a replacement at any time, the original will not return back.

Q2: Does the bottom of the car cell phone holder can be adjusted?

A2: Definitely! You can adjust the length according to the size of your phone. Never block your phone camera.

Q3: Does it need a large flat space to stick?

A3: No, this phone holder suction cup has a diameter of 2.56in /65mm, slightly larger than the width of a credit card.

Q4: Does it stick to the leather dash or texture?

A4: No, both these materials are not friendly to the suction cup.

Q5: Does this clip work with vertical blades of the air vent?

A5: Sure! The phone holder fits most standard air vents and both horizontal & vertical vent blades, but not for circular vents. Don't worry about your car model, as long as the vent type meets.

Q6: Why use swivel clips instead of "I" and "II" gears?

A6: Because it would be suitable very well for whatever the thin or thick vent blades. This is the benefit of its flexible clip. You only need to rotate it simply to meet your needs. No worries about damaging the vent blades or the holder falling off.

Q7: Does the cell phone holder work with the latest phone Samsung galaxy s20, note 20/iPhone 12,12 pro,12 pro max, 12 mini?

A7: Of course, this cell phone holder is quite stable for all smartphones! And perfect for 99% cars & phones as you please.

• Upgraded Wide Bottom Tray: Windshield phone holder for car, features a wider bottom tray to provide larger space to plug the charging cable and press home button, which gives support to long-time navigation and radio on the road
• Release Button on The Back: Compared with side button, this cell phone car mount design with back button, easier to clamp and release. For better protection, striped silicone have been added on both side to ensure a tight grip and avoid any scratches or dropping of the device
• Thick Phone Case Friendly: Phone clamp of this windshield phone mount, can be opened up to 92mm, features wider clamp and bottom tray to ensure it suitable for 4.7-7 inches smartphone. Compatible with iPhone 12/12 Pro Max/12 Pro/12 Mini/11/11 Pro/Xs/Xs Max, Samsung S10+/S10/S10e/S9+/S9/S8+, Moto E4, LG Stylo 3 and more
• Ultra Strong Suction Cup: After thousands of rigorous tests, we upgraded the material of the car cell phone mount from PVC to TPU, which can withstand the temperature and load test in high quality. Not easy to deform even use often. Washable design ensure it can wash to restore its adsorption performance
• Creative Extra Long Arm: Design with 13 inches gooseneck extension arm, this car cell phone holder can be bent to fit dashboard & windshield, will not take your eyes down and off the road, upgrade your convenience and driving safety. Air vent design for more uses