12 best swisher riding lawn mowers

Product description

Riding Lawn Mower Replacement Seat Bolt hole pattern - 7in front to back x 7.5in side to side

• Bolt hole pattern - 7in front to back x 7.5in side to side

User questions & answers

Question:	What is the center to center distance between the side to side holes
Answer:	This diffusion sock is intended to fit over the barn door attachment, so the sock will not fit directly onto the Neewer 304.

Product description

Riding Lawn Mower High Back Replacement Seat

Product description

Riding Lawn Mower Replacement Seat

Product description

Arm Rest Kit for Milsco / Michigan Seat Co. Turf Care XB and TS Series seats. We cannot tell you if it is compatible with your mower seat. Please reach out to your seat manufacturer for clarity.

• Arm Rest Kit for Milsco / Michigan Seat Co. Turf Care XB and TS Series seats
• We cannot tell you if it is compatible with your mower seat. Please reach out to your seat manufacturer for clarity.

Product description

This lightweight battery is functional and safe. It is valve regulated which makes it impossible to spill, and with its tightly sealed construction, it can be operated from any angle! With its hard plastic case, it can take severe amounts of High impact and not do any damage. This battery will last a long time both physically and chemically. Exceptional accidental deep discharge recovery performance with low self-discharge characteristics.

• 12V 280CCA (Tests 400CCA) 12 Volt Sealed AGM Battery with Flag Terminal (Nut & Bolt)
• Dimensions: 7.62" x5.12" x 6.56" Weight: 15 lbs.
• Sealed and maintenance free operation, non-spillable construction design with safety valve for explosion prevention.
• Replaces ALL Standard U1`Style Lawn Mower and Garden Tractor Batteries.
• Double Check Positive and Negative Terminal Locations Compared to Your Current Battery!

Product description

Delivering power when you need it, the Mighty Max ML18-12 12 Volt 18 AH uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications.

The ML18-12 is an Absorbent Glass Mat (AGM) technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.

Mighty Max SLA batteries are utilized in a wide variety of applications including; Consumer Electronics, Electric Vehicles, Engine Starters, Golf Carts, Hunting, Lawn and Garden Tools, Medical Mobility, Motorcycles, Power sports, Portable Tools, Solar, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and  more.  

Specifications: 

Voltage: 12 Volt

Amperage: 18 AH

Chemistry: SLA, AGM

Terminal: Nut and Bolt (NB)

Battery Dimensions:

7.13 in x 3.01 in x 6.57 in

Weight: 11.90 Lbs

Warranty

1 Year

Genuine Mighty Max battery Product

• ML18-12 SLA is a 12V 18AH Sealed Lead Acid (SLA) rechargeable maintenance free battery - UL Certified
• Dimensions: 7.13 inches x 3.01 inches x 6.57 inches. Terminal: Nut and Bolt. Listing is for the Battery and Screws only. No wire harness or mounting accessories included.
• SLA / AGM spill proof battery has a characteristic of high discharge rate, wide operating temperatures, long service life and deep discharge recover.
• Rechargeable battery that can be mounted in any position, resists shocks and vibration. Long lasting high performance in high and low temperatures.
• Backed by a 30 day refund policy and full 1 year warranty.

User questions & answers

Question:	Is this a type U1 lawnmower battery
Answer:	The lights operate on 110 circuit, but you could buy an adapter, no doubt. Probably right here on Amazon.com. :)

Product description

If you want The ballpark yd look, you need the Swisher 38” response lawn striper wheel kit. Striping is a way to add visual effects to your property’s landscape. Stripes are made when grass leans in different directions & reflects light differently. The Swisher Striper wheel kit is engineered to follow the contour of The ground using the weighted wheels to bend the blades of grass in the direction of your mowing pattern. For high contrast stripes, mow in opposite directions on each pass. Your pattern design can be long stripes that are Diagonal, parallel or perpendicular to the road, crisscrossed Diamond or checkered waves etc. Some factors will affect how well the striping will stand out such as height of the grass & the grass type. Longer blades of grass are easier to bend over & will have higher contrast striping. Some grass breeds are stiffer & do not bend easily. Fits all Swisher mid-mount response ZTR models.

From the Manufacturer

Swisher offers American made Outdoor Power Equipment and ESP Safety Shelters that are built to last. From zero turn mowers to finish & rough cut mowers to log splitters to ATV/UTV attachments. Everything you need to make life easier and maintain and manage your property.

• Achieve a manicured, ballpark look for your yard
• For use with Swisher mid-mount response ZTR models
• Easy assembly- All hardware included
• Assembled dimensions: 18.5”L x 39.75”W x 4”h

User questions & answers

Question:	Can it be raised and lowered when not striping
Answer:	It should definitely fit that flash. The fitment is sort of elastic, and im not too familiar with that flash but it cant be much bigger than my YN468..should fit like a charm since mine leaves a little space.
Question:	Will this fit a toro z master 44 inch deck
Answer:	It is a rather stiff material that provides reinforcement. There aren't any tubes but there may be some additional reinforcement wiring. Mine doesn't sag at all.
Question:	Will this work with a cub cadet ultima ZT1 50in? mower
Answer:	Keep in mind that the amount of softness you can achieve is entirely dependent upon both the size of the lighting surface and the distance from the subject. Despite being so much larger than a portable flash, this flash hood unit is still very small as compared to the size of the soft boxes we use in the studio for commercial, product or glamour photography. Art studies, nudes, and small objects are an exception in that they usually benefit from less diffuseness in order to capture the contours of the subject and would especially benefit from the small hood of this unit.The nice romantic pregnancy shots that Cedric Converset so nicely provided via the link in his answer were taken with a 135mm tele so he had to be a good distance away to take full body shots. I would guess, and welcome his corrections, that his off camera flash with this soft hood was 12-20 feet from the subjects since the flash shadows, though softened, were still quite distinct. Of course, a naked flash would have been very harsh and unflattering, for sure. So, it all depends on what you want and expect. If you simply want to soften the edges of a flash shadow somewhat when shooting 6-12 feet away, this is a good unit to use. However, if you want the very soft shadowing of a studio soft box with a unit this small, you will be limited to having the flash only a few feet away which limits you to head or head and shoulder shots. Here's an example that clarifies the effect of light source softening. Imagine a small round object, perhaps a golf ball, hung by a string a foot in front of a wall. Now imagine a light source that is a panel the size of an 8.5 x 11 sheet of paper. Imagine placing the panel an inch in front of the golf ball. It should be obvious that the light hitting the ball will come from all parts of the panel, including the edges that are at quite a large angle to the center of the ball. As such, the top, bottom, and sides of the ball will be illuminated to varying degrees and the shadow on the wall would be very soft - almost indistinct. Now move the panel a foot away. It should also be obvious that the angles from the edges of the panel to the ball are much narrower so less light reaches the sides and is more direct so the wall shadow would be more pronounced but still a bit soft. If we then move the panel 6 feet away, the angles between the edges of the panel to the ball would be very small so the light is much more direct producing stronger shadow edges on the wall - but still softer than a naked flash tube.Here's an extreme version of the same example: Our sun is about 860 thousand miles across, making it our solar system's largest soft box! However, it is also 95 million miles away. So, the angle from both edges of the sun to you standing on a sunlit beach is a minuscule 0.5 degree. As such, all its light rays are coming at almost exactly the same angle making your shadow on the sand appear very sharp.In Cedric Converset's examples, since the shots were of two people that were at least head to hip or full body, the flash had to be much farther away to avoid hot spotting. So, the amount of the softening is greatly reduced because of the distance. For the "studio glamour shot" look I produced for magazines and ads, I used soft boxes that were at least 6 feet tall and 3 feet wide and, even then, less than 12 feet away. To achieve a bit of that studio level soft look with a hood of this small size, you are limited to covering a very small subject area such for a head shot or head and shoulders shot with the flash hood only a few feet away. It may seem counter-intuitive that the closer you are, the softer the shadowing. However, the closer you are, the more important it is that the light source be large enough to cover the subject area. If it's too small, you'll get hot spotting since the panel's light output won't cover the entire subject area.If you really want a full soft box look for larger subject areas, this unit will not do that. If you want the full soft box look at an event, look for a large flat or stucco wall with a bright neutral color, have your subjects stand about 15-20 feet from the wall with you about 6 feet in front of it so the angle between the wall and your line to the subject is about 60 degrees. Then bounce your flash back over your shoulder targeting a spot several feet above your head. That will give a large soft lighting effect at a 3/4 angle and easily cover groups of 2-10 people. In THAT case, you want to use a naked flash to maximize the light hitting the wall. You lose a lot of power doing it but you end up with a great effect. For that reason, always bring a powerful flash to handle events. Bouncing off the ceiling is always a second choice since overhead lighting is always unflattering, deepens the eye sockets, shines balding heads, ages the subject's look, and lends an unwanted murkiness. If you think about all that, it should start to become apparent that to get a nice, full, soft light, often called a "north light", the light source has to be close the same size as the subject area placed about twice the distance as the size of the panel. So, I'd place a 6' studio soft light about 12' from the model. Translating that math means you could get a nice soft light head shot if you placed this 10" diagonal light about 2 feet from the subject.Don't let my length diatribe mistake my intentions. This unit is *very* effective in reducing the very harsh, razor-edged flash shadows that naked tubes produce when the hooded flash is less than 15 feet away. It just will *not* produce the soft box lighting you see in studio shots. It's way too small for *that* specific use.Sorry for the length but I thought it might be helpful to you and others. I ask that readers forgive me if they already know the subject.
Question:	Does this work with a standard 3 point hitch setup, on a kubota bx, for example
Answer:	A Stoffen-type platic diffuser does not INCREASE the surface area of the illuminating light source, as does the 6x8-in face of a softbox. Larger illuminating surface area reduces or eliminates shadows in macro-photography. I use a plastic diffuser INSIDE of the softbox to more evenly distribute the light to the full 6x8-in face.

Product description

Performance and style hit the grass running with Husqvarna’s Z200 series of zero-turn mowers. Cutting-edge design, proven performance and innovative features combine to make lawn maintenance an event instead of a chore. Featuring a 54 in. reinforced steel cutting deck, the Z254 mower is powered by a 26 HP Kohler engine. Plus, an innovative, maintenance-free transmission makes this an easy mower to own, season after season. Look no further for your next turf cutting machine.

• 26 HP Kohler engine provides reliable startups and a max speed of 6.5 MPH
• A patent-pending park brake system automatically activates or deactivates as the steering levers are moved outward or inward
• Air induction mowing technology draws air from the top and bottom of the deck, improving grass and delivering a superior cut
• Reinforced steel stamped cutting deck is made of heavy flat-stock steel for maximum durability
• Clippings can be discharged, mulched or bagged (mulching kit and bagger attachment sold separately)

User questions & answers

Question:	What size is the rear tires and how does it perform on a hill
Answer:	Don't recall the tire size but performance on grades is not good, Going around the hill, the tire on the high side loses traction. going down hill both tires lose traction. Does better going up hill.
Question:	Does this have a power assisted bagger/colector attachment
Answer:	It comes as pictured (non-mulching blades and basic discharge). Unless your mowing a field, highly reccomend getting the multching blades & cap for the discharge. If not, you'll be blowing grass clippings 10 feet.
Question:	Forward Ground speed
Answer:	The max forward ground speed is 6.5 mph
Question:	Where can I purchase replacement blades for this mower? Specifications says blades are 18-1/4" (that is correct, I measured them) but all the blades l
Answer:	Our local Ace Hardware services these mowers so i am sure they have the correct blades

Product description

Keep your machine running nicely with Swisher's 87" replacement belt. This replacement belt works with Swisher ZT2766 mowers. Swisher replacement belts help ensure long life of your machine.

From the Manufacturer

Swisher offers American made Outdoor Power Equipment and ESP Safety Shelters that are built to last. From zero turn mowers to finish & rough cut mowers to log splitters to ATV/UTV attachments. Everything you need to make life easier and maintain and manage your property.

• Swisher 89-inch belt has been specifically designed to keep your machine running at its peak level
• One replacement 87 in. belt
• For replacing belt on Swisher's ZT2766 ZTR Mower
• For installation instructions, refer to your owner's manual

Product description

Swisher's Universal ATV Dump Bucket makes moving snow, dirt, and gravel quick and easy. It has a wide 44 inch bucket and 1/8 inch steel construction for powerful moving capabilities. It features a quick release dump engagement and a durable powder coat finish that will stand up to harsh climate conditions. This bucket can be used with an existing ATV winch. Use with Swisher's 2646 universal mounting kit or 10260 mount kit. Once installed, the blade can be attached and removed in seconds without tools. Bucket only. ATV not included. Made in the USA.

From the Manufacturer

Swisher offers American made Outdoor Power Equipment and ESP Safety Shelters that are built to last. From zero turn mowers to finish & rough cut mowers to log splitters to ATV/UTV attachments. Everything you need to make life easier and maintain and manage your property.

• Constructed of reinforced 1/8" thick steel
• Designed for scooping and moving modest weights
• Pull pin attaches and detaches bucket to Swisher's Mounting Kit
• Bucket only. ATV not included.

User questions & answers

Question:	will thim mount to a standed plow frame
Answer:	this will not fit the promaster studio 300c flashes
Question:	Will it fit 2001 Honda Rubicon without additional mounting kit? I already have warn winch installed
Answer:	I'm gonna try to explain it as explicit as I can, since I'm not English native. If your flash fits Bowen accessories, then the speedring will fit on your flash, that's the only reference I can give you. I recommend you to check some forums before proceed with the purchase.
Question:	Will it mount on a polaris sportsman 570? Which mounting kit should I purchase
Answer:	The images where incorrect they are being changed to the correct ones.
Question:	will it fit on a honda atv
Answer:	Fotodiox does apologize but the wrong photos where attached to this listing, it is being corrected. Thank you

Product description

Compatible With Briggs and Stratton 593433

Replaces Old Briggs # 699916 794294

Most 21B000 Model Briggs Engines

21B707-0453-B2

21B707-0453-E1

21B707-0505-B2

21B707-0505-E1

21B807-0100-B1

21B807-0113-B1

21B807-0114-B1

21B807-0116-B1

21B807-0119-B1

21B807-0120-B1

21B807-0121-B1

21B807-0122-B1

21B807-0123-B1

21B807-0125-B1

21B807-0125-G1

21B807-0126-B1

21B807-0239-B1

21B807-0239-E1

21B807-0289-B1

21B807-0289-E1

21B807-0290-B1

21B807-0290-E1

21B807-0296-B1

21B807-0296-E1

21B807-0297-B1

21B807-0326-B1

21B807-0326-E1

21B807-0372-B1

21B807-0372-E1

21B807-0422-B1

21B807-0448-B1

21B807-0453-B2

21B807-0505-B2

21B807-0649-B1

21B807-0667-B1

21B807-1167-B1

21B807-1169-B1

21B807-1169-G1

21B906-0020-B1

21B906-0020-B9

21B906-0020-E1

21B977-0147-B1

21B977-0149-B1

21B977-0152-B1

21B977-0152-B9

21B977-0155-B1

21B977-0156-B1

21B977-0157-B1

21B977-0160-B1

21B977-0163-B1

21B977-0163-E1

21B977-0183-B1

21B977-0183-E1

21B977-0190-E1

• Compatible With Briggs and Stratton 593433
• Replaces Old Briggs # 699916 794294 and Most 21B000 Model Briggs Engines
• Package Included: 1x Carburetor,1x Gasket ,1x Line

User questions & answers

Question:	Need cross reference numbers for Nikki carb
Answer:	Yes it should work. It fits over the light casing itself. I used it with a smith victor light. Worked easy with no issues.
Question:	I have a swisher rough cut mower. briggs and stratton 11.5hp engine model 21r806 type 0047 f1, does this carb fit this motor
Answer:	Can one of you guys measure the inside ring with the screw downs n it I have a novatron 2100c series and my light diameter is 6.5 inches with the rubbers off will it fit to 6.5 Thanks in advance.
Question:	i have a craftsman mower 16 hp 917.273351 is this the right one for it
Answer:	It looks like on Interfit website that that light system uses Fitting Type Bowens® / S-Type so if that is true then yes this should fit that system.
Question:	Hi I have a 425001xa Murray mower will this carburetor fit
Answer:	no it won't

Product description

Product description:

Ignition switch for craftsman lawn mower parts ,Genuine Parts Tractor Ignition Switch with 2 keys toro lawn mower parts 

.

Replacement For:

Replacement For Ariens Model: 0052400; AYP: 125104X, 175566, 3621R, 365402, 3L5402, 4406R, 440LR, STD365402

Replacement For Bobcat Model: 48032B; Bunton: PAL0903

Replacement For Craftsman Model: 24688, 24695, 3621R, 365402, 4406R, STD365402;

Replacement For Cub Cadet Model: 725-0267, 725-3026, 925-0267B; Dixon: 4197, 539125010;

Replacement For Gilson Model: 36457;

Replacement For Grasshopper Model: 183806;

Replacement For Great Dane Model: D18091, D28176;

Replacement For Hako Model: 69-367, 70-116;

Replacement For Honda Model: 35100-772-003;

Replacement For Husqvarna Model: 506558701, 506917101, 532125104, 532365402, HU506558701;

Replacement For Iseki Model: ISE525315;

Replacement For John Deere Model: AM102551;

Replacement For Jonsered Model: 506 55 87-01, 506 91 71-01, 532 12 51-04, 532 36 54-02; 

Replacement For Lawn-Boy Model: 23-0660, 700172, 741308 

Replacement For Lesco Model: 012120; 

Replacement For MTD Model: 725-0267, 725-0267A, 925-0267, 925-0267B; 

Replacement For Murray Model: 21064, 421064, 421064MA;

After-sales service：

Please don't worry about after-sales service.We accept return/replace with any reason.

We provide 1 years’ warranty for all of our products since the purchasing day.

If the product is damaged due to shipping or installation,pls dont hesitate to contact with me , we will se

• Introduction:Craftsman Lawn Mower Tractor Ignition Switch With 3-Position,5-Spade Terminals，2-keys
• Material: Zink Alloy Body Of Switch & 2 Pcs Of Iron Key & cooper connection terminals & Iron screw .
• Replaces O.E. # 925-0267, 925-0267A, 925-0267B, 725-0267, 725-0267A, 725-0267B
• We invite customers to participate in product testing, if the test results are not suitable for your equipment, please apply for a full refund. We provide 1 years’ warranty for all of our products since the purchasing day and accept return/replace with any reason. If the product is damaged due to shipping or installation,pls dont hesitate to contact with me , we will send you new for free.
• Fitment: For Toro ss5000 ,8-32 ,John Deere 320 RX75 RX95 STX38 1010C Craftsman GT6000,532140301, STD365402 24688 725-0267 925-0267 21064 42106

User questions & answers

Question:	Does not replace a 4406r craftsmen part. pin out is incorrect and it will blow the ignition control fuse
Answer:	I don't know. I am not using it for another purpose. I tried one the same size and it did not work on my mower which has a 16 HP engine. I suggest you consult your mower operation manual.
Question:	Does it fit a encore rage
Answer:	Bolt hole pattern - 7in front to back x 7.5in side to side
Question:	Work for Kawasaki fh500v zero turn starter switch
Answer:	This is a great ring, I bought two and use them on a no name brand strobe with a 5" base, it adjusts and holds well.
Question:	Does it suit for john deere lt155 ignition switch
Answer:	From the looks of the Lowel Omni Light looks like there is no place to clamp this speedring onto, so I would have to say No it will not work.