10 best dupont wood floor paints

Product description

Deep sealing formula protects against dirt, water, and oil based stains

• Safe for use with Ceramic and Porcelain tile
• Deep sealing formula
• 1 Quart covers up to 250 Linear Feet

User questions & answers

Question:	How much does it cover
Answer:	i applied it all my grout for glass and stone tiles with out any problems
Question:	can you wipe over the tile while you are sealing the grout or you can only put on grout
Answer:	I used a non-cartridge, inexpensive blue face filter from Home Depot.
Question:	Can this be used on glass tile
Answer:	It's sprayed on. It has a strong odor at first so be aware of that, but it doesn't last long. This is a good product. Beware of cheaper brands.
Question:	Is this a penetrating sealer
Answer:	At least two hours after grouting. Yes, this product can be used one year later as well.

Product description

S.T. Dupont Line D Tony Stark Men's Pen 412707

• S.T. Dupont,Watches
• Watches

User questions & answers

Question:	Is this rollerball or ballpoint
Answer:	It should not wash off but, depending on the color, the color may soften and fade a bit in the sun. You will want to apply it when there is a nice stretch of weather forecasted so that the paint has a chance to harden and cure before being exposed to rain.
Question:	Does it comes with all authenticate papers & presentation packaging
Answer:	I haven't tried but other reviews indicate the fast drying formula is already thinned out
Question:	Is this pen s.t dupont genuineness (authentic) or duplicate ? how to prove it's genuine such as to provide a warranty by s.t dupont
Answer:	This is not a paint, but rather a stain. If you're looking to cover up defects or anything along those lines this will not work. Yes, it will alter the color of the wood with one use though.
Question:	Is this pen s.t dupont genuineness (authentic) or duplicate ? how to prove it's genuine such as to provide a warranty by s.t dupont
Answer:	It's not a gel stain but the consistency is thicker than a regular stain.

Product description

DuPont Snow & Ice Repellant with Teflon Fluoropolymer prevents snow from building up on snow blowers, satellite dishes, shovels, plows, gutters, snow mobiles and more. Simply spray onto surface when clean and prior to snowfall. Fortified with Teflon fluoropolymer to enhance snow repellency.

• Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance
• Prevents snow and ice buildup, frozen doors and clogged augers and chutes
• Apply to snow blowers, door gaskets and snow shovels
• Also great for snow mobiles, snow plows, and gutters and leaders

User questions & answers

Question:	Is this product something that has to be re-applied after each use or does it last an entire season of snow and ice
Answer:	Yes it’s ok to use it in the jacuzzi and. It does not foam . Just be careful when standing up it’s oil so it will be slippery.
Question:	Would this be good to apply on my car other than the windshield or windows
Answer:	No
Question:	Has anyone used this on satellite dishes and does it in fact prevent snow from accumulating on the dish
Answer:	I would guess that it's fine for hair, since it's mostly an oil blend. It might be a little heavy, depending on your hair texture.
Question:	How does this product compare to Fluid Film and/or Sno-Jet
Answer:	Yes, there are several symbols, one of which is the "Cruelty-Free" rabbit symbol.

Product features

DuPont Snow & Ice

Apply to the blades, auger, and chute of snowblowers to keep them running smoothly and prevent jams.

DuPont Snow & Ice

Spray on plows to prevent buildup and maximize effectiveness.

DuPont Snow & Ice

Coat satellite dishes to prevent snow and ice accumulation, which can interrupt service.

DuPont Snow & Ice

Spray on roof gutters and leaders to keep them clear.

DuPont Performance Lubricants

Cars, boats, tractors, power tools, and industrial equipment are expensive purchases; that’s why it’s so important to properly maintain them. With DuPont Performance Lubricants & Greases, you can make sure all of your investments keep on working as hard as you do. We offer a complete line of high-performance, technologically driven lubricant and grease products to meet your every need. When it comes to finding the right lubricant or grease for your project, look no further than DuPont.

Product description

S.T.DUPONT'S NEW TONY STARK / IRON MAN COLLECTION: A SPECTACULAR CELEBRATION OF POWER AND ELEGANCE The new collection stemming from the partnership between S.T. Dupont and MARVEL highlights elegance, provocativeness, strength and mysteriousness - the multiple facets of male seduction. Such an ideal man exists and is called Tony Stark... or perhaps Iron Man? TONY STARK ROLLERBALL PEN Designed on the basis of the Line D model, adorned with a subtle guilloche honeycomb motif. The body of the pen is engraved with the S.T.DUPONT logo, whilst its cap bears the Tony Stark signature.

User questions & answers

Question:	is this authentic pen or replica ? the price is suspicious
Answer:	Not fireproof, but you could use this product on your floor. I recommend that you use 31200 silver grey. this color will give you more light in the room.
Question:	it is limited
Answer:	Cannot use on asphalt. Can be used on a cement driveway if the cement has NOT been coated with a concrete sealer. If not known if a concert sealer was applied in the past, do not use this paint. It will peal in time if a concrete sealer was applied
Question:	What so special about this pen
Answer:	I used it on a wood porch-- seems to wear well. Oil base soaks in, protects wood.

Product description

The Dupli-Color Scratch Fix All-in-1 touch-up tool features an abrasive prep tip, exact-color match paint, and clear coat. We are the only brand with colors tested and approved by vehicle manufacturers for a perfect match to the original factory finish when restoring that scratch or chip. The New Scratch Fix All-in-1 tool helps you fix it easy and fix it right in your garage.

• Fit type: Vehicle Specific
• PROFESSIONAL
• The Dupli-Color Scratch Fix All-In-1 Touch-Up Tool Features An Abrasive Prep Tip, Exact-Color Match Paint, And Clear Coat
• Part number: DA1692

User questions & answers

Question:	Is this clear resistant to gasoline if it is spilled on it
Answer:	No I spilled some on my tank and it yellowed an peeled
Question:	Hi, can this product be used on Plastic Headlights? Thanks
Answer:	It kind of depends on what you're doing with the headlights. As stated here if you're doing a standard restoration kit to remove the normal yellowing in the headlight's plastic lens, those kits do not come with a process to clear coat afterwards. In general terms though, if you want to clear coat the lens you're just adding clear protective layers to the lens and have the added benefit that if you then get a scratch you simply have to hit it again with some sandpaper and apply a new coat to "remove" the scratch. If you use a fine grit sandpaper (800 - 1200) to scuff the lens in order to hold the clear coat you'll be fine and would never use any type of primer in this instance. I have to say I have not used this on headlights but I "smoked" my tail lights with VTH Nightshades and then clear coated over that with this and it turned out great. I also have to say though that I only got a little over a year out of it before the clear coat started to yellow and the Nightshades started to lighten up so just using a headlight restoration kit may keep the yellow off longer, I've just never used one to know for sure.
Question:	I used a dupli-color clearcoat with da1692 code. but can looked different and it said "clearcoat". is this the same clearcoat or is it different
Answer:	Yes this is clear coat and this clear coat is a paint which gives glows 'shine' to the existing paint surface. (I have bought one of these and tried to use it on my car's bumper and it really messed up) I recommend to try on any old paint surface before using on main body
Question:	Would i be able to apply this over my hood after i paint it
Answer:	That is the purpose but I would not recommend it. It wants a week between coats or it will orange peel. Try a lacquer instead. You can build up coats to match the gloss level.

Product features

Premium Acrylic Enamel

Dupli-Color Premium Acrylic Enamel is a no sanding, paint and primer in one with excellent adhesion to plastic and maximum rust resistance. This advanced high-solids formula bonds to a variety of surfaces while delivering excellent durability for the most demanding projects. Ideal for: all metals, plastic, wood, fiberglass, masonry and concrete.

Product description

SHERWIN WILLIAMS FC 720 ULTIMATE CLEARCOAT AUTOMOTIVE USE QUART SIZE KIT

• Clearcoat finish with ultra-quick 30-minute force dry time
• Protects your car from fading due to sun exposure, and makes your car shine like it is brand new
• With only 2 applications of Ultimate Overall Clearcoat, refinishing your car has never been easier
• Buffering can start 24 hours after application of the clearcoat
• Finish 1 Hardener aids in the curing process, while also delivering added protection to the surface

User questions & answers

Question:	Is it heat resistant? Can i apply it to engine parts
Answer:	Probably it is not heat resistant, so our suggestion don't apply to engine parts. There are enamel engine paints in the market that you can safely use.
Question:	I just painted using acrylic enamel with clear in it can I use fc720 for better shine
Answer:	Yes Adam......Fc720 will boost the shine if you ........since you have clear in the base.....scuff with 1000 grit before applying pure Clear
Question:	refraze my question I want to use this to clear coat a 55 chevy original paint with out anything else will it work
Answer:	It will, but try a small spot first, sometimes a catalyzed product will lift an uncat product. I think it will be fine
Question:	Can this be used on head lights
Answer:	If you wet sand with 1000 grit and use a flex additive , you can great short term fix but eventually, any urethane clear will peel. Use a good rubbing compound and a lot of elbow grease to solve problems with yellowing plastic lenses. Avoid any kind of coatings. If lenes are really bad replace them.

User questions & answers

Question:	will it bond to polyester gel-coat ? thanks,sam
Answer:	I think it will but do a test piece
Question:	I recently purchased a spray gun and have the required compressor to use it. Are there any other special equipment that I need to use this clear
Answer:	This clear only requires the same equipment as as any 2k automotive paint .
Question:	Can this be used over top of other paints
Answer:	Can be used over most basecoat
Question:	Does anyone know if this system is gasoline resistant? I was going to use this on a Motorcycle gas tank? Thank you
Answer:	I have used this system to paint multiple motorcycles. It works real good very resistant to chips and solvents once cured properly. I have used it over many bases candy, marble, even metal flake lays down pretty flat sands easily and buffs quickly. I do custom airbrushing it even lays down over waterborne paint once cured properly. I have a motorcycle I have been riding for over ten years with this clear that looks as good as the day it came out of the booth.

Product description

High quality automotive touch up paints and refinishing products for Mazda CX-3/CX-5/CX-9/Mazda3/Mazda3 Sport/Mazda6/Miata/MX-5 to meet the needs of traditional collision repair centers, do-it-your-selfers, car builders, motorcycle builders & hobbyists.

Order Processing: We take 2-3 business days on average to process, formulate, manufacture, and ship out your order (3-5 days during peak times). This is because your paint is individually CUSTOM-MIXED for your vehicle. Selecting a faster shipping method does not guarantee faster delivery. Orders placed after 8:30 am EST will be processed within 24 hrs on the next business day.

Order Placement: Verify that you are ordering the correct color for your vehicle by selecting the factory color codes provided in our listing that match your vehicle color code. Orders not placed in this manner may cause you to receive the incorrect color. We cannot be responsible for colors ordered without the correct code unless you have been advised or assisted by our customer service representatives. No returns or refunds will be given unless orders are placed using the OEM (Original Equipment Manufacturer) color code. Work with us, we are willing to go the extra mile to make it right for you.

Refunds: No returns or refunds will be authorized unless orders are placed using the OEM (Original Equipment Manufacturer) color code (see Order Placement). You must notify us within 30 days of receiving the order of any physical defects or issues with your product i.e. broken container, missing brush, wrong color sent etc. ANY QUESTIONS, please contact us.

Product Liability: Using our products means you acknowledge having tested them before application and have fully read and understand the instructions and warnings that arrive with your product. Please be careful and use great care when touching up your vehicle.

• Perfect match to OEM factory color code on your car. Our touchup paint is always freshly mixed so you don't purchase old paint sitting on a shelf or in a warehouse.
• Includes base coat, mid coat, and clear coat in three bottles. The paint bottles include agitator ball & brush in cap for easy, no mess application.
• Professional-grade touch-up paint is ideal for minor chips and scratches caused by rocks, road debris, door dings, and other damage.
• Auto Paint Depot uses state-of-the-art computerized technology and production equipment for highest quality urethane-based paint to last for years after application. Paint has 2-3 year shelf life stored between 55-90 degrees Fahrenheit.
• Clear coat is recommended to better match the finish and durability of your vehicle's original factory paint. Clear coat included.

User questions & answers

Question:	Regarding the quart size, is the base coat and the mid coat pre-reduced 1-1? What else needs to be added to components prior to application
Answer:	2" x 2" x 9"
Question:	Can this be used in a spray gun if needed
Answer:	NO. What was formerly named Soy-Gel is now Blue Bear 600GL and can be found here: https://products.franmar.com/products/coatings-remover-soy-gel
Question:	Do you provide instructions for applications? Or possibly a video
Answer:	Neither product contains Methylene Chloride. The 605 PRO also does not include NMP (N-Methylpyrrolidone).
Question:	Mazda cx-9 soul red paint code 46v is the same one
Answer:	yes
Question:	the clear coat is 1 gal and the hardener 1/4 gal?, thanks
Answer:	I did a test on a piece of vinyl coated aluminum and after 2 hours it removed the vinyl but aluminum is fine no damage. Blessings Jim
Question:	Is there any issue of die back and how long does it take to air dry
Answer:	Tribology Food Grade Silicone Spray has a low operating temperature of -40F. It will be ideal for your freezer application.
Question:	What is the coverage in sq feet /gal
Answer:	Tribology's Silicone Spray is not a totally dry lubricant. After applying TTL Silicone Spray the base carrier will evaporate leaving a light coating of Silicone lubricant.
Question:	Well one gallon do a whole truck
Answer:	This product is excellent when applied on clean cement. The questions you should have asked is: 1) what is the condition of the floor at this time, and 2) was the cement sealed using a cement sealer? Some coatings do not adhere to cement sealers from the past.I strongly suggest that you clean the floor first by mopping with a 1 to 4 mixture of muiratic acid and water, than rinse with clear water.Regardless of what product you choose, clean the floor as I described and test the product by painting a small area and see what type of adhesion is achieved. Fork lift travel is not what you need to be concerned about.

Product description

Rust-Oleum Automotive 257884 11-Ounce Enamel Spray, Gloss Clear

• For indoor/outdoor use
• Wide fan delivers smooth, professional appearance
• Excellent UV and weather resistance
• Superior color and gloss retention
• Great for touch-up projects

User questions & answers

Question:	Can this spray can clear coat be used over hvlp spray gun applied color base coat
Answer:	I believe that it would do just fine. I use it for my custom crank bait, (or fishing lures) and it works great.
Question:	Dry time between coats? Can it be lite sanded and buffed to mirror quality? Will it work for final of a painted guitar
Answer:	Yes on sanding. Wet sanding is best.and mirror quality is up to the painter and sander.it is very good tough paint from a can.
Question:	How scratch-resistant is this clear coat
Answer:	It’s a good product. I cleared coat the tank on my FLHTC and front bumper of my F150 and it has stood up well. I put at least 4 coats. It’s the only thing that worked to resist gasoline spills on the fuel tank after using other products.
Question:	does this work on existing small exterior chips in the paint of my car? To keep them from spreading or
Answer:	I’m not sure but I’d say no.

Product features

Rust-Oleum Automotive 257884 11-Ounce Enamel Spray

Apply vibrant, lasting color to your vehicle or other metal surfaces with Rust-Oleum Automotive Enamel Spray. This product features an extra-wide fan spray that delivers a smooth, professional finish—with outstanding color and gloss retention. Great for touch ups.

• Indoor/outdoor
• Gloss, semi-gloss or flat finish
• UV- and weather-resistant

For Best Results

Apply multiple light coats vs. one heavy coat.

Product description

***Not For Sale in California. California Residents - Please Note: This item is not compliant for purchase in the State of California. If your shipping address is a California address you cannot purchase this item. Your order will be cancelled, No Exceptions. California residents must purchase our Low VOC High Gloss Urethane Compliant Clear. Note: Monitors vary - onscreen colors are for general color reference only. Save 20% to 70% on products that meet or exceed the performance of the more expensive name brands! Restoration Shop Products are manufactured in the USA to the highest automotive industry standards. his two-component polyurethane system with a 4:1 Mix Ratio offers a durable, high gloss finish. This product is user-friendly, resulting in increased production. This product polishes easily after 6 to 8 hours. High Gloss Urethane Clear is multi-use; can be applied as a spot, panel or overall application. Our Restoration Shop High Gloss Urethane Clearcoat will enable you to achieve a high quality and extremely durable finish that has a deep glossy wet-look shine that will last for years.

• Restoration Shop Products are manufactured in the USA to the highest automotive industry standards.
• Restoration Shop 1 Quart Clear Kit includes 1 Quart of High Gloss Urethane Clear Coat (RSP RC 4200-QT) and a Half Pint of Urethane Hardener (RSP RH4201-HP)
• Our Restoration Shop High Gloss Urethane Clear is formulated for premium productivity at 4.2 VOC
• High Gloss Urethane Clear that can be applied over a variety of coatings including base coat and clear coat systems
• This item is not compliant for purchase in the State of California. If your shipping address is a California address you cannot purchase this item

User questions & answers

Question:	What would be the appropriate solvent to clean the gun afterwards
Answer:	Yes you can use the flames without the heat turned on.
Question:	Does this product require thinning? If so do I purchase reducer
Answer:	Not sure if this product would scratch tile. I would use paint remover and if it dosnt come out of grout you could probably use this product.
Question:	can I put this on as a top coat over acrylic enamel
Answer:	I would say it strips equivalent to probably 60 grit sandpaper, however it won't wear down the wood like sandpaper will. The brick will crumble apart before it will wear down the wood.
Question:	What's the shelf life of the hardener and what do I use to thin the clear
Answer:	Who paints vinyl siding?? If you made that mistake, I'd blow off the paint with a pressure washer. This block is very abrasive and will damage your siding.