13 best tire rack for tire shop

Product description

If you're looking for a smart way to rack up your different sized tires in a way that will not take up space and declutter your home garage or shop, you've come to the right place.

Pit Posse's adjustable wall mount folding tire rack is the solution for you.

✔️ Made from polished aluminum with anti-corrosion properties

✔️ Will mount easily on your wall with 16 inch or 24-inch studs

✔️ Designed to collapse up and fit flat against your wall when not in use

✔️ Great storage solution for garage, shop or trailer

✔️ All bars are adjustable to fit all tire types & sizes

✔️ Extends 27 inches off the wall

✔️ Rated 400 Pounds and holds powerfully

Easily store your seasonal tires, recreational tires, or track tires and wheels with Pit Posse's adjustable, and great tire rack.

• ✅ Made from polished aluminum with anti-corrosion properties
• ✅ Will mount easily on your wall with 16 inch or 24-inch studs
• ✅ Designed to collapse up and fit flat against your wall when not in use
• ✅ Great storage for garage, shop, or trailer
• ✅ All bars are adjustable to fit all tire types & sizes (Extends 27 inches off the wall / rated for 400lbs)

User questions & answers

Question:	Can you fold up only half of the rack if your only using one 4ft section
Answer:	No holes to bolt to the floor. You can drill holes to achieve your needs.
Question:	Is this the same american made Pit Products tire rack? Looks identical but this is much cheaper
Answer:	There are (4) thumbscrews that are molded on to the head of 1/4 inch screws. The thumbscrew is 7/8 in. diameter and the thickness is about 5/16 in. You can easily tighten them when an adjustment has to be made.

• Infinitely adjustable to securely hold any wheel size
• Wide base with triangulated arms holds bikes firmly
• Easy in-out for practical store use
• Rubberized feet protect floors
• Dimensions approx.: 22" x 15" x 17" (560 x 380 x 430 mm)
• Sport type: Cycling

User questions & answers

Question:	Are there holes where I can bolt this to the floor
Answer:	It would be fine either way. You can mount it on drywall or on exposed, unfinished walls. If you don't have finished walls, you might want to consider a large pegboard instead. It would fill up some wall space and may be nicer in the long run.
Question:	Does the original version have thumbscrews now? The pictures above show set screws, but they show thumbscrews on their website
Answer:	The mounting kit is just some wall anchors and screws which you can buy anywhere. The best bet is to find studs and bypass the drywall anchors completely
Question:	Will this holds a 16 inch kid bike
Answer:	Thank you for your interest in our products! The interior dimensions of the Garage Storage System Base Cabinet are 29.92”H x 28.66”W x 19.17”D.
Question:	Does this securely accommodate a fat bike tire of 27.5 x
Answer:	One shelf, no drawers. Looks good, but for the money, you could probably do better in terms of usefulness.

Product description

Constructed of heavy duty steel, the Champ Tire Storage Rack,

is the perfect space saving solution to storing your tires in your auto body shop

or garage. This three tiered storage rack is designed with double rivet support beams

for large capacity. With an open design, it keeps tires within easy reach and accessible

from all sides. Depending on the size of your tires, this tire rack can easily store up to

twenty-four. The shelving on this rack is also adjustable to allow storage for a

variety of tires sizes.

Dimensions: 84in H x 60in W X 12in D

Materials: Heavy Duty Steel

• HEAVY-DUTY THREE SHELF UNIT – Constructed of heavy-duty steel, this is the perfect space saving solution for tire storage. Ideal for auto body shops and home garages alike. Can store up to 24 tires, depending on size. Measures 84in H x 60in W X 12in D
• ADJUSTABLE SHELVES – Quickly and easily adjust the shelves to suit your requirements, making this the ideal system if need to store a variety of tire sizes.
• DOUBLE RIVET SUPPORT BEAMS – Durable construction and double rivet supports give you added capacity with an open design that makes tires easily accessible from both sides.
• QUICK AND EASY ASSEMBLY – Designed to be easy to put together and easy to use.
• MADE IN USA – Champ are proud of their USA-made range of quality, innovative tools and equipment designed to help body shop technicians and car repair enthusiasts get the job done.

User questions & answers

Question:	Can you put caster wheels on bottom to be able to move around
Answer:	It’s not strong enough to hold all tires. Get bend . If you get it by any chance do not forget to anchor it. If you put big and heavy tires on top it will fall . When taking out tires.

Product description

Spare Tire Wheel Mount Kit, Heavy Duty Bracket / Carrier for 6 & 8 Lugs, 27021

Please review all product information to ensure that this product is compatible with your unit.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm the exact product needed. It is your responsibility to confirm this is the correct product you require; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Be sure to review photos, specifications, and bullet points closely to verify this is the correct product for you. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product you are looking for, please ask. If you seek assistance we will need as much information as possible to help you find the product you are looking for.

Our knowledgeable product specialists are always willing to help ensure that you’re getting the correct product. Stay rugged, my friend.

- The ROP Shop Staff

• Spare Tire Wheel Mount Kit, Heavy Duty Bracket / Carrier for 6 & 8 Lugs, 27021
• Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread Type - Course. Refer to images 2 & 3 for more information
• Includes - Brackets, Short Bolts, Long Bolts, Nuts for Short Bolts, Nuts for Long Bolts, Washers for Long Bolts; comes as shown in the first image
• Bracket carrier for 6 & 8 lugs

User questions & answers

Question:	will this fit 6" tall (3"x6") tongue frame
Answer:	Hi, We recommend up to 1.5 inches to avoid excessive movement and collapse. The stand will hold most road and childrens bikes comfortably. Thanks delta

Product description

A commercial duty mobile platform for storing, displaying, or transporting stacks of automotive tires. Keeps tires off the floor, protects floors from stains and makes the stacks easy to move for cleaning or rearranging. 30" diameter injection molded plastic with 1000 lb. capacity casters for tires and wheels up to 35" in diameter. "Ez steer" caster configuration allows for exceptional control while moving stacks even on side-hills and driveways. Lockable casters. Light enough to carry at only 18 lbs.

• 5 commercial duty casters with ultra-strong 4-bolt mountings for heavy and reliable service
• Patented "Ez steer" caster configuration, steers with one hand even on side hills
• Patented center anchor point or side strap guides for securing loads or displays to the base
• Comes with a 12' lash strap for securing those loads
• Light enough to hand carry with the built in handle

User questions & answers

Question:	What are the religious symbols on the bottom
Answer:	There are no religious symbols on the bottom, just a logo with a stylized "TS" for TruStack. There is also a poetry quote from Psalms regarding chariots as the manufacturer is named Chariot Concepts.
Question:	Can I buy replacement swivel casters
Answer:	If you are considering replacing the Rigid casters with Swivels, you will lose the directional stability of the EZ Steer design feature, but the mounts for the Rigid casters will accept the Swivels without any problem. The TruStack Tire Dolly should have information molded into the top face to contact the manufacturer if you want matching casters. They have always been quick to respond.
Question:	Can this be used for a 65 gallon pot/planter
Answer:	Given that 65 gallons of pure water is less than 600 pounds and accounting for soil, dimensions of the planter is your only concern. It would have to be less than the diameter of the dolly, or you’d have to position the dolly directly under the center of gravity if the planter is wider than the dolly.

Product description

Installs securely over the vehicle's spare tire.Fully adjustable to fit most spare tires, the SR1 Bolt-On rack's support arms can be centered for side mounted tires and folded when not in use.

• Fully adjustable to fit most spare tires, the SR1 spare tire rack's support arms can be centered for side mounted tires and folded when not in use
• Comes fully pre assembled; quick installation as the rack fits over most spare tires; Max Spare tire width: 12"; larger tire kit available from manufacturer
• Does not require removal of spare tire or backup camera (Jeep Wranglers)
• Max Capacity: 35lbs per bike. Do not use with E-Bikes
• Kids bikes, ladies frame bikes and some mountain bikes may require a top tube adapter to fit on the rack

User questions & answers

Question:	Would this fit on the hummer h3 tire in the back if the hummer
Answer:	Yes, it would fit but you would also probably need our XL Tire Kit. The XL Tire Kit is $10.00 and free shipping in the U.S.
Question:	I have a 32 inch tall spare approximately 12 to 14 inches wide on a Jeep Wrangler. Do you think the rack will fit
Answer:	I think my 2013 stock tire is 32 x 10. If you have over sized tires, it likely won't fit.
Question:	Is this rack secured to the tire or the vehicle so it can't be stolen
Answer:	It is mounted to the tire. There is no locking mechanism. If you wanted to secure the bike, you would have to use a cable and a lock.
Question:	DOES IT FIT 2002 JEEP WRANGLER
Answer:	This rack is not dependent to year of vehicle. It mounts to the spare tire itself works very well

Product description

Rage Power Sport Blue Devil spare tire mounted 2-bicycle carrier rack for hatchbacks or vans outfitted with a rear spare tire carrier bracket and/or attached wheel. Fits spare tires up to 7-11/16" to 12.5" wide when secured to the spare tire hub mount for hauling 1 or 2 bicycles. Includes bicycle tie-down securing strap and a rear reflector. The bicycle rack cradle section is designed to swing sideways for flush-profile storage against the vehicle's hatch. Key lockable, includes keys. Made with heavy duty steel construction and a durable black paint finish.

• Attaches to a vehicle hatch rear spare hub mount; fits 7-11/16" to 12.5" wide spare tires
• Hauls 1 or 2 bikes safely and is key lockable; Includes keys
• Includes bicycle tie-down strap and rear reflector
• Bike cradles swing to the side for storage
• Heavy duty steel construction with a durable black paint finish

User questions & answers

Question:	will this properly fit on a 2007 jeep liberty
Answer:	About 20 inches.
Question:	Is this secure enough to mount on trailer spare tire
Answer:	M5, 1.5 inches long
Question:	will it fit 315/70R17 , rim depth 8.5inch
Answer:	Some women's bikes have a dropped down top tube which would make it hang crochet.Doug
Question:	Will it fit on a 2005 toyota rav
Answer:	I don't remember the exact weight limit for them, but we have two in our garage. One holds two kids bikes and one holds two adult bikes with no problem. One thing I would recommend is using a heavier duty screw that is a little longer than the ones that come with the rack.

Product description

Our MaxxHaul Tire Dolly is designed to easily transport car, light truck, SUV tires and wheels. Constructed from high impact injection molded polyethylene for durability. Tire dolly makes it fast and easy to move tires through service bays and storage areas. Dolly can accmodate up to five tires and wheel assemblies or up to 8 tires. Moves 360 degress for maximum manuevarability. Two units can be connected together and work as a creeper or a dolly for moving other lightweight appliances, furnitures, etc. Features four 3" non-marring swivel castors. Includes storage located in middle of dolly with locking cover for your tire accessories. Maximum load: 250 lbs. Overall size: 25" dia x 4.5" high.

• This PATENT PENDING tire dolly is constructed from high impact, rugged injection molded polyethylene with ribbed reinforcement for strength and durability
• Can handle up to five tires and wheel assemblies or up to 8 tires. Moves 360 degrees for maximum manuevarability
• Two units can be connected together and work as a creeper or a dolly for moving other lightweight appliances, furniture, etc
• Features four 3 inch non-marring swivel castors. Storage located in middle of dolly with locking cover perfect for your small tire accessory parts
• Maximum load of 300 lbs. Overall dimensions: 25" diameter x 4-1/2" high

User questions & answers

Question:	My tires are 315/40R21 can I fit them in the dolly
Answer:	Of course. What would prevent you from doing so?
Question:	What kind of strap is best to keep the tires in place
Answer:	Totes. The hook part that goes under the bike frame holds the bike out a bit and you can bring them closer to have the bike farther from the wall or spread wider for closer to the wall. The lower bike will have a bit more room because it's a bit farther from the wall than the top. So, if I had to guess the most likely problem is if your bike frame doesn't hook in well the weight won't be very balanced. For instance, my wife's bike has the typical female-bike sloped frame bar design and I had to hook onto her bike rack to get the best balance. A flat top frame bar like road bikes have is optimal.
Question:	Will a set of 19 inch wheels with mounted tires fit on this
Answer:	The hardware store?
Question:	can you stack 4 rimless tires that are 28" in diameter on this
Answer:	I can't speak for the michaelangelo rack, but the donatello is the perfect solution for having 2 bikes in a small apartment. This rack worked great for me living in a small city apartment with 2 bikes. I had two steel bikes on this and it seemed like it could handle more weight. It's also possible to use it as a repair stand if you raise the lower rack up a bit and only have 1 bike on during the repair.All in all, highly recommended!

Product features

MaxxHaul 80746 Tire Dolly

Constructed from high impact, rugged injection molded polyethylene with ribbed reinforcement for strength and durability.

Tire dolly makes it fast and easy to move tires through service bays and storage areas. Easily transport car, light truck, SUV tires and wheels.

Maximum load: 300 lbs. Overall size: 25" dia x 4.5" high.

Versatile

Features built-in small parts storage with locking lid.

Multi Use

Two units can be connected together and work as a creeper or a dolly for moving other lightweight appliances, furniture, etc.

Rugged

Will handle up to 5 tires and wheel assemblies or up to 8 tires.

Swivel Castors

Includes four non-marring swivel castors - one with brake.

Product description

Fat tire wheel holder for all Sport rider and trail rider hitch Racks. Fits tires up to 5" wide. Includes extra-long wheel straps. The ultimate bike rack accessory for those who are looking to carry their fat tire bike.

• Fat tire wheel holder for all sport rider and trail rider hitch racks; Fits up to 5" wide tires
• Sold as a set (left and right side) to carry 1 fat bike.
• Heavy duty powder coated steel
• 50lb bike capacity when used on Sport Rider and Trail Rider Racks; 80lb capacity when used on Sport Rider Ebike Racks (models HR1450E and HR1455E)
• Fits on 1-1/4" square tubing

User questions & answers

Question:	Does this. Product come as a pair
Answer:	It fit well on my 1997 RAV 4 spare tire. If your RAV 4 has a spare tire cover over the tire on the tailgate you would have to remove the cover since the post holding the bike rack comes out thru the mounting hole in the spare tire. I use my carrier 4 times a week and it works quite well....very happy with it.
Question:	Would this fit on a Pro Rack hitch platform bike rack? The tubing it would slide over is 1.25" x
Answer:	Not the way it comes. The max frame height is 5". Orderd this because of the yes answer to this question and found out that it is not a true statement.
Question:	What is the sguare stock size the brackets slide on
Answer:	No, with the 8' rack the center sections join both halves so folding is all or nothing. To my knowledge you would need to mound two 4' racks to have separate folding capability.
Question:	Will this still fit normal tires? I’ve got a fat bike that I need to carry around but still want it to carry a bike with 2.2” tires
Answer:	I'm not sure it looks the same to me and was here very quickly so I'm sure it's in the us

• ORGANIZED FAT TIRE BIKE STORAGE: Space-efficient vertical storage of fat tire bicycles on the wall in your home, garage, or bike shop!
• HEAVY-DUTY SOLID STEEL: Supports up to 100 lbs plus a durable powder-coating finish to last a lifetime!
• RUBBER-COATED HOOKS: Protect your bike rims from scratches and holds your bikes securely on the rack.
• EASY INSTALL: Mounting hardware included, Simply mounts into wall studs for maximum strength.
• EXCLUSIVE PATENT PENDING DESIGN: Built to hold your fat tire bikes and built to last!

User questions & answers

Question:	How deficult to hang the bike
Answer:	I haven't measured it, but I would say about 12 inches. I use mine on a drill press.
Question:	I am looking for a compact rack to hold two mountain bikes. Love the doze and simple design. Any reason it will not work for mountain bikes
Answer:	About 14 inches deep across the two tray drawers and 47 inches long overall the entire desk then you have the center open areas which is about 23 inches deep and 23 inches across. Hope this helps.

Product features

Ultra Strong, Solid Steel

Made from solid steel and welded together as a single unit, the BLAT Fat Tire Bike Rack supports up to 50 lbs per hook, up to 100 lbs total! Durable, powder-coated finish to last a lifetime!

Rubber-Coated Hooks

Protective storage hooks hold your bike by the front or rear wheel. The Durable coating protects the wheel rim from scratches and also helps hold bikes securely on the rack.

Space-Efficient Storage

Hanging vertical storage fits up to fat tire bicycles on the wall for slim, compact storage. Hang bike upright and bike downward to fit accommodate handlebars.

Quick, Easy Installation

Includes wall lag screws to mount to your wall through the holes in the rack base plate. The holes measure 16" apart to fit standard wall stud spacing.

About StoreYourBoard

• The most trusted name in the industry for organizing your outdoor adventure gear!
• Headquartered in Charlottesville, VA
• Since 2009, we have designed and developed innovative solutions to store your bikes, kayaks, paddleboards, surfboards, skis, snowboards, wakeboards, skateboards, canoes, fishing rods, tools, and more!
• Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
• Free up space in your home, garage, or retail shop and have your gear ready to go for your next adventure!

Product description

The SafeRacks Tire Rack is the perfect solution to storing loose and unused tires in your garage or workshop.



THE LOOK: Brackets are powder coated with a textured black finish and telescoping tubes are coated with a textured zinc finish to give heavy duty garage-ready appearance.



COMPONENTS: Heavy-Duty 12 Gauge tubing used with Heavy-Duty 11 gauge wall brackets makes the SafeRacks Tire Rack one of the strongest on the market.



HARDWARE: Three 5/16"x3" case-hardened and heat-treated lag bolts secure each wall bracket along with 3/8" Grade 5 black oxide bolts securing the tubing. Try asking a competitor if their hardware is EVEN graded.



TUBING: Heavy Duty 12 gauge tubing is approximately 15% thicker than the competition! Our telescoping tubing is 14% LARGER in diameter than comparable tire racks AND SIZED PROPERLY to prevent bowing or the perception of sag when loaded!



FITMENT: Our telescoping tubes are closer in size than many competitors to reduce flexion and overall sag. Adjustable rods span up to 56” and easily stores four tires (Minimum distance is 31.25").



SOLUTION: Don't settle for an over-sized brightly painted eye sore when you can securely store your tires on the best looking tire rack on the market. Finally, you can store your tires above the ground and free up your cluttered floor space, without sacrificing the aesthetics of your garage!

• THE PERFECT SOLUTION: Safely store tires above ground and free up precious floor space.
• WORKS ANYWHERE: Adjustable, heavy duty 12-gauge telescopic steel tubing extend up to 56 inches, making it suitable for any garage or work shop.
• HEAVY DUTY: The SafeRacks Tire Rack holds up to 400 pounds, easily storing 4 tires
• SUPERIOR DESIGN: Our tubing is 15% thicker and 15% larger in diameter than the competition! 11-gauge steel wall mounts are installed with grade 8 heat-treated, case hardened lag bolts.
• AESTHETICS: Textured Black Powder Coated Brackets with Textured Zinc Tubing and Black Oxide 3/8" Bolts

User questions & answers

Question:	Do they tires make contact with the wall
Answer:	My tires do not touch the wall. Cross bars have multiple possible locations so tires could touch the wall if you want them to.
Question:	I would like to know how best to lift 55 lbs of tire/wheel above your head to put on your SafeRacks tire rack? Should i buy a ceiling winch
Answer:	If you can’t safely lift each wheel and tire onto the rack by yourself you can enlist the help of a neighbor. If you can not get help then yes get a winch and sling to assist you.

Product description

Never leave your Fat Tire bike at home again. Swap out your wheel trays on your Freedom and Superclamp hitch bike racks with Fat Tire Wheel Holders and take your Fat Tire bike along for the ride. Quick and easy to install on your Saris Freedom or Saris Superclamp Bike Rack. These holders can handle the bulkiest of tires, up to 5-inches wide. As a company we produce racks that allow people to bring a bike and explore their surroundings wherever they go. We develop trainers that let cyclists build and maintain fitness in preparation for upcoming pursuits. We create the infrastructure communities need for their citizenry to ride, park and service their bikes. We do it all from our home in Madison, WI, USA, where the vast majority of our products are built and backed by us.

• Adds extra stability to the connection between the rack and hitch
• Built with 100% recyclable, non-rusting materials
• Made in the USA
• package weight : 2.39 lbs
• Sport type: Cycling
• Fits bicycle tires up to 5” wide

User questions & answers

Question:	Will these work on saris superclamp ex 2-bike
Answer:	If 28" is you tire outside diameter, you should be able to, as this dolly is 25" in diameter. So they would overhang 1.5" on each side. You might need to strap the down to the dolly though, as uninflated tires will be more unstable when stacked.
Question:	Can these Saris tire cups slide in on a similar design Schwinn rack with square rods measuring 1.25" x
Answer:	I installed mine on a 2003 Liberty. Based on the process, I do not see any reason it wouldn't work out. The only thing I will mention is that you need to knock out the plastic center cover from the spare (plastic thing...says "Jeep" on it...) and keep it somewhere while the rack is on the car.
Question:	I need regular size wheel holders not fat tire. how much do they cost
Answer:	Not sure if you mean secure as in "strong" or secure as in "security from theft). Either way, it doesn't mount to the spare. It gets sandwiched between the spare and the spare tire mount. You need to remove the spare to remove the rack.
Question:	Will these fit a saris thelma
Answer:	There are 3 different length tubes that come with the rack. I looked in the manual and found this: Tire Width (read the size located at the side of your tire) 195mm-235mm - Use the short connecting tube (235mm=9.25 in.) 235mm-275mm - Use the medium connecting tube (275mm= 10.83 in.) 285mm-12.5" (318 mm) - Use the long connecting tube Mine is mounted on a Jeep Liberty. I had to knock out the center logo on the spare tire for the mount to go through. Also, cannot use the spare tire cover with the rack on. I hope this helps.

Product description

Repair Tire Shop Series accessory 20 pc set for 1:24 Scale model, made by Phoenix Toys.

• 20 pc tire shop equipment
• 1:24 Scale Hobby Grade Display Accessories
• Add on accessories for Die-cast models
• Detailed Tire Shop Equipment
• Not Suitable for Children Under 8 Years Old