13 best elenco breadboards

Product description

This high quality bredboard has 3220 test points, 504 separate 5 point terminals, and 14 horizontal bus lines. Additioally utilize the four color coded binding posts (black, red, yellow, green). From Elenco.

• 3220 Test Points
• 504 Separate 5 Point Terminals
• 14 Horizontal Bus Lines
• Binding Posts Coded Black, Red, Yellow and Green
• From Elenco Electronics

User questions & answers

Question:	power supply
Answer:	It's only a breadboard with the capability of attaching a separate power supply using banana plugs. You can probably buy a cheap regulated power supply for around $50.
Question:	Will 1/2 watt, 2 watt, and 5 watt resistors fit in this? also leads from large capacitors that would be used in guitar amps
Answer:	This board accepts 20 AWG wire. I have not tried any wire that's larger in diameter yet. It possibly could accept wires a wee bit larger in diameter. I know it accepts large paper clips just fine. I hope this helps out.
Question:	Does this come with breadboard jumpers
Answer:	No, you have to buy them separately, but they shouldn't be too outrageously expensive.
Question:	Do the power strips go full length or half length connectivity
Answer:	Connectivity is full length

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

Breadboard with - 3,220 test points, 504 separate 5 point terminals, plus 14 horizontal bus lines. It has Binding Posts: Four coded black, red, yellow, and green. Board Dimensions: 8 1/4” wide, 9 1/2” long. Also includes the JW-350 jumper wire set - Which also contains 350 lengths of pre-stripped, pre-formed #22 solid wire in various colors. 14 different lengths of 25 pieces each. Contained in a large 14 compartment plastic case.

• Breadboard with: 3,220 test points, 504 separate 5 point terminals, plus 14 horizontal bus lines
• Binding posts: Four coded black, red, yellow, and green
• Breadboard dimensions: 8 1/4” wide, 9 1/2” long
• Includes the JW-350 jumper wire set , made in Taiwan
• For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits

User questions & answers

Question:	What are the green and yellow binding posts used for
Answer:	So what a capacitor do is it keeps a steady voltage of around 12 to 14 volts to your amps and also so u dont put a big strain on your battery and on your alternator...with out it u will notice your car lights dime when ever the base hits because the amp needs power to keep your subs kicking
Question:	I see several breadboard power supplies advertising 700ma to 1a. how many ma or amps can safely be used with this particular breadboard
Answer:	It prevents your vehicle's electrical system from being over taxed causing your headlights to dim and fans to slow. When the bass hits your amp draws the excess power needed from the capacitor.
Question:	Will this work with high frequency circuits
Answer:	Yes, however if you really want to solve the problem. Go with a 10.
Question:	Do the red and black post connect to the breadboard power strips, or do you have to jumper from the posts to the breadboard
Answer:	I'm running 800w rms and it does the job.

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

High quality bredboard utilizes a heavy black anodized base with three color coded binding posts (black, red, and green). Contains 1,660 test points, with 252 separate 5 point terminals, plus 16 horizontal bus lines of 25 common test points each. Will accommodate up to (18) 14 pin DIP ICs, or (15) 16 pin DIP ICs. Dimensions: 5-1/4" x 8-1/2". Net weight: 3/4 lb. From Elenco Electronics

• Top quality breadboard has 1660 test points
• 252 separate 5 point terminals, plus 16 horizontal bus lines of 25 common test points each
• Will accommodate up to (18) 14 pin DIP ICs, or (15) 16 pin DIP ICs
• Heavy, black anodized base
• From Elenco Electronics

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

This top quality bredboard has 830 test points, with 126 separate 5 point terminals, plus 8 horizontal bus lines of 25 common test points each. Will accommodate up to (11) 14 pin DIP ICs, or 16 pin DIP ICs. Includes three color coded binding posts (black, red, and green). Base material is heavy black anodized aluminum. Dimensions: 7-1/4" x 3-3/4". Net weight: 1/2 lb. From Elenco Electronics.

• Top quality breadboard has 830 test points
• 126 separate 5 point terminals, plus 8 horizontal bus lines of 25 common test points each
• Will accommodate up to (11) 14 pin DIP ICs, or 16 pin DIP ICs
• 4 Horizontal Bus Lines of 50 Test Points Each
• From Elenco Electronics

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

Breadboard with - Terminals: 2,390 test points, 378 separate 5 point terminals, plus 10 horizontal bus lines of 50 test points each. Binding Posts: Four coded black, red, yellow, and green. Breadboard Dimensions: 7” wide, 9” long. Includes a JW-140 Jumper Wire Kit - Which also contains 140 lengths of pre-stripped, pre-formed #22 solid wire in various colors. Contains 14 different lengths of 10 pieces each.

• Breadboard with - Terminals: 2,390 test points, 378 separate 5 point terminals, plus 10 horizontal bus lines
• Binding posts: Four coded black, red, yellow, and green
• Breadboard dimensions: 7” wide, 9” long
• Also includes the JW-140 Jumper wire kit, made in Taiwan
• For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits

User questions & answers

Question:	Is the gap in the middle of the rows size for standard DIPs
Answer:	Add a kinetics 600 battery to it and you should have more then enough power to be honest battery is $59 CAN'T GO WRONG.
Question:	The board does not come with assembly instructions. How to set it up? The four color round buttons go in the top, but it doesn't power the board
Answer:	Bass
Question:	Anyone have experience with the 3M 318 Breadboard($75)? Looking for the difference between it and this Elenco. I have to purchase for a college class
Answer:	Use the little circuit board and slide it in the screws on the cap. Positive to positive and negative to negative. Then wire the positive to the positive from the battery and the negative to the ground. It should charge right up to 13 volts in about a minute or so.
Question:	I show 4 terminals for power up top, do they automatically power the sides or do I need a jumper to power the sides
Answer:	I doubt it would be able to.

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

User questions & answers

Question:	what is the spacing of the holes in the breadboard? 0.10" or 2.0mm
Answer:	I measured the boards I received, and the holes do NOT appear to be on 0.10" centers. I don't know what they are. They don't line up with 0.10" solder protoboards I have.
Question:	Does the black ink that shows column letters and row numbers smudge or rub off easily
Answer:	No, the ink seems to be pretty permanent. At least so far :)
Question:	can the power bus be removed from the rest of the breadboard
Answer:	Yes, both sides can be removed although cutting through the adhesive backing and adhesive can be a bit of a pain. You also have to remember to clear the space where the "ears" are so they slide apart easily.
Question:	Is the thru hole spacing sized for standard DIP packages
Answer:	Yes.
Question:	Does it matter that the caps in my tv are blue amd not black
Answer:	shouldn't matter as long as capacity (uF) is the same and the voltage (V) is >= to the caps you have. I think this brand is supposed to be pretty good quality.
Question:	So how do you use the then i do have a tv that is kind of broken that i could use them for but i thought i was buying them for a capacitor for my car
Answer:	This item are standard capacitors, not super/ultra capacitors. My use case was to solder all these capacitors together to smooth out the 12 volt output from my rectified landscape lighting style power transformer I use for my refrigerators (12/24 volt RV/sleeper truck compressor type). If you have a power source that you feel doesn't give you smooth enough DC electricity, splice these into the circuit and off you go. Just don't exceed the 25 volt rating, or you'll have some firecrackers instead.
Question:	Can i use this cap for dc volt
Answer:	Electrolyte capacitor are designed to be use only in D.C., if it get connected to A. C. it will burst open.
Question:	Can you tell me how tall they are
Answer:	13x20mm/0.51x0.79 inch

Product features

What is breadboard？

Breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate.

The breadboard has strips of metal underneath the board and connect the holes on the top of the board. Note that the top and bottom rows of holes are connected horizontally and split in the middle while the remaining holes are connected vertically.

The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color.

The Breadboards is 2-Sided Peelable Adhesive Tape，Easy to Stick on the Prototype Shield，Suitable for Line Prototype Design.

Product Features:

830 tie points breadboards: 630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.

400 tie points breadboards: 300 tie-point ic-circuit area plus 2x50 tie-point distribution strips providing 4 power rails.

Wire size: Suitable for 20-29 AWG wires.

Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet.

Voltage / Current: 300V/3-5A.

Package includes:

2PCS 830 Tie-Points Breadboard

2PCS 400 Tie-Points Breadboard

Product description

We have the manufacture factory,

making productions and selling by ourselves.

So we can control the quality of our productions by ourselves for you.

We’d like to receive your valuable suggestions for our products and make your idea come true.



830 tie points total. 200 in 2 power rails, 630 in a 30 x 10 matrix

White plastic, with black legend. Colored power rails

For wires 21 to 26 AWG

2-sided peelable adhesive tape



Component listing:

3pcs 830 tie-points breadboard

• 630 tie-point IC-circuit area plus 2x100 tie-point distribution strips providing 4 power rails.
• White PP plastic body with black printed legend. Color legend on distribution strips.
• With self-adhesive tape on the back, make it easy to stick on the Prototype Shield.
• Packing in a paper box.
• We have always cared about the customer experience and improve the product function details.

User questions & answers

Question:	What are the dimensions of one breadboard
Answer:	Each is about 55mm x 165mm (2-1/8 inches x 6-1/2 inches).
Question:	Why is there a typographical error in the name of a sponsored item
Answer:	No auto correct...too expensive
Question:	will these work with raspberry pi
Answer:	Absolutely. This is a universal development product. It will work with any electronics project you have.
Question:	Are the power rails continuous or split
Answer:	They are continuous.

Product description

Breadboard 3220 is designed for solderless experimental design electronic circuit manufacture. Variety of electronic components can be freely inserted or removed as needed,

eliminating the need for welding, saving assembly time of the circuit, the element can be reused, very suitable for electronic circuit assembly, commissioning and training.



1. Accepts most electronic components, including integrated circuits and transistors for digital and/or analog circuitry;

2. ABS plastic material;

3. Completely reusable;

4.Binding Posts Coded Black, Red, Blue and Green.

5. Accepts a variety of wire sizes(AWG:20-29)

6. Coloured coordinates for easy component placement

7. Pins are identified by numbered rows and columns;

8. Ideal for high frequency and low noise circuits;

9. Use to breadboard and debug circuit designs;

10. Black aluminum back plate

• ✔️3220 Test Points, 4 Binding Posts
• ✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;
• ✔️ABS housing, metal contact clips; Accept wire with diameter 20-29AWG;Black aluminum plate
• ✔️Binding Posts Coded Black, Red, Yellow and Green
• ✔️Perfect for Arduino Shield Prototyping and Testing. Powered by Makeronics Technology

User questions & answers

Question:	How many support feet (are there center supports), no photo of underside
Answer:	6 rubber feet in total are inside package(4 are must, 2 more are spare parts). We can place one rubber foot in the center of underside. Makeronics provide a better solution for rubber foot fixing. We can use these screws inside package to robustly fix rubber foot. Also provide an instruction manual for rubber feet installation.
Question:	Are the binding posts automatically connected to the busses? If not what’s a good setup? Banana from supply to post, tie in wire to bus
Answer:	No. You can use male-to-male dupont wire to connect them. Or it is easier and more convenient to use the our banana cable kit (banana plug to dupont wire(male)) to make robust connection between binding post and bus.
Question:	Where is it made
Answer:	Makeronics owns R&D team in Austin ,Texas. Our product is designed in Austin, Texas and assembled in China like Apple mode.
Question:	Are the four binding posts 3-way
Answer:	The black one of 4 binding posts in general is used for ground. The remained 3 are inconnected and independent for different voltage(such as 3.3V,5V,12V...) or same voltage.

Product description

Breadboard with - Terminals: 1,660 test points, 252 separate 5 point terminals, plus 8 horizontal bus lines of 50 common test points each. Binding Posts: Three coded black, red, and green. Dimensions: 5 1/4” wide, 8 1/2” long. Includes a JW-70 Jumper Wire Kit - Which contains 70 lengths of pre-stripped, pre-formed #22 solid wire in assorted colors and lengths.

• Breadboard with - Terminals: 1,660 test points, 252 separate 5 point terminals, plus 8 horizontal bus lines
• Binding posts: Three coded black, red, and green
• Breadboard dimensions: 5 1/4” wide, 8 1/2” long
• Also includes the JW-70 jumper wire set, made in Taiwan
• For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits

User questions & answers

Question:	Are the binding posts internally wired to the breadboards power rails
Answer:	You’d be better off upgrading alternators
Question:	Is the plate made out of metal or is it acrylic
Answer:	There are several reasons for distortion the primary reasons being the overpowering of a speaker or the lack thereof. The likelihood of a capacitor's ability to clean this up is either very good or marginal depending on the type of capacitors used and of course on who you ask. As far as cleaning up the shrillness of treble from a tweeter, in my opinion a capacitor is typically not known for this. It is more used to eliminate the dimming of lights and interior lights and also to supply additional power on demand during moments of heavy energy consumption such as during a prolonged or heavy bass note.

Product features

Learn by Doing

Elenco is an educational toy, hobby, and electronic instruments company based in the Chicago suburb of Wheeling, Illinois. Elenco has been a family owned and operated business since 1972, founded by Gil Cecchin, an electrical engineer.

From its humble roots as a basement operation with one product, Elenco has emerged as a leader in the educational toy industry with hundreds of products and new ideas constantly in development. Elenco’s family now includes over 40 full-time employees and 60,000 square feet of warehouse and offices.

Product description

Component listing:

1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V

1pcs1660 tie-points Breadboard

1pcs 65 Jumper Wire

140pcs Solderless Jumper Wire

20pcs Female-to-male Dupont Wire

2pcs Pin header (40pin)

1pcs Precision Potentiometer

2pcs Photoresistor

1pcs Thermistor

5pcs Diode Rectifier (1N4007)

5pcs NPN Transistor (PN2222)

1pcs IC 4N35

1pcs IC 74HC595

1pcs Active Buzzer

1pcs Passive Buzzer

10pcs Button (small)

10pcs 22pf Ceramic Capacitor

10pcs 104 Ceramic Capacitor

5pcs Electrolytic Capacitor (10UF 50V)

5pcs Electrolytic Capacitor (100UF 50V)

10pcs White LED

10pcs Yellow LED

10pcs Blue LED

10pcs Green LED

10pcs Red LED

1pcs RGB LED

10pcs Resistor (10R)

10pcs Resistor (100R)

30pcs Resistor (220R)

10pcs Resistor (330R)

10pcs Resistor (1K)

10pcs Resistor (2K)

10pcs Resistor (5K1)

10pcs Resistor (10K)

10pcs Resistor (100K)

10pcs Resistor (1M)

User questions & answers

Question:	The power supply doesnt appear to be working the day it arrived. What is the polarity of the board
Answer:	I suppose you could, but it's a little more complicated than checking capacitors in parallel. You have to add the reciprocal of the capacitors in series, where you only have to add the value of the capacitors in parallel. I usually test capacitors individually in circuit & any one I may find in question I unsolder one leg of the capacitor to isolate it from the circuit for an accurate test. I'm usually checking several capacitors so I use solder wick to unsolder a leg of each capacitor I want to test to speed things up. Then I re-solder them all when I'm done testing. It is actually a pretty fast process. It is always best to test a component in isolation if there is any question of its condition.Check out the following link about capacitors.http://farside.ph.utexas.edu/teaching/302l/lectures/node46.html
Question:	Does the kit come with an AC power adapter and a usb connector like in the picture
Answer:	The meter uses three frequencies listed below. Elenco Electronics Freq 820Hz 200pF,2000pF,20nF,2uF 82Hz 20uF 8.2Hz 200uF,2000uF,20mF
Question:	How do I power up the board, I never used that little chip board as a power source for a bread board
Answer:	I would recommend this cap, if you are running 500 or more watt system. I use it on my twin 12's in a box an the bass hits harder now ,even at medium volume.

Product description

Frey Scientific Elenco 830 test points breadboards is a quality breadboard that provides unlimited freedom in laying out circuits and prototyping. Each board includes 830 test points, 126 separate 5 point terminals, plus 8 horizontal bus lines of 25 common test points each. Capacity is up to 11, 14 pin or 30, 16 pin dip ICs. Three color coded binding posts, black, green, red. Base material is heavy aluminum black anodized. Measures 7-1/4-inches length by 3-3/4-inches width.

• Elenco 830 test points breadboards
• A quality breadboard that provides unlimited freedom in laying out circuits and prototyping
• Each board includes 830 test points, 126 separate 5 point terminals, plus 8 horizontal bus lines of 25 common test points each
• Capacity is up to 11, 14 pin or 30, 16 pin dip ICs
• Base material is heavy aluminum black anodized, three color coded binding posts, black, green, red

Product description

Perform Basic Electronic Experiments.No soldering or tools required; all parts included. Electronic components including 9 Volt Battery, Bred board, speaker and assorted diodes and transistors. Featured Experiments: Electronic Keyboard,Water Alarm,Finger Touch Lamp,Electronic Kazoo,Battery Tester,Magnetic Bridge,Voltmeter,Morse Code and Much More!

• Perform Basic Electronic Experiments
• No soldering or tools required
• All parts included
• 50 projects
• Complete easy to read instruction manual

User questions & answers

Question:	What are the projects that can be made using this kit? i'm looking for a specific one - bouncing ball sound imitation
Answer:	It has a .1amp/250 volt replaceable fuse so testing anything with 1000 volts is not an option.