12 best miniature lights for models

Product description

Features:

100% Brand new and high quality.

This pre-wired led has been connected a resistor(1000 Ohm) in the prewire.

The red wire is anode and the black wire is cathode.

These pre-wired LED bulbs are perfect for creating your own custom LED setup!

Use them to make headlights for your cars and trucks, wing lights for your planes.

These pre-wired LEDs are very helpful props for model train Layout and building, train station layout ,school project model ,car,and miniature dollhouse.

Specifications:

Brand:evemodel.

Size:5mm Led, The wire about 20cm(L)

Forward voltage:12V~18V(1000 Ohm resistor in series),DC Compatible.

Forward current (typ/max): 20mA/30mA.

Light Color: Warm White.

Package included:20pcs Pre-Wired leds.

• These pre-wired LEDs are very helpful props for model train Layout and building, train station layout ,school project model and miniature dollhouse.
• This pre-wired led has been connected a resistor(1000 Ohm) in the prewire.
• Brand:evemodel.Size: 5mm Led, The wire about 20cm(L)Forward voltage:12V~18V(1000 Ohm resistor in series),DC Compatible.Forward current (typ/max): 20mA/30mA.Light Color: Warm White.
• The red wire is anode and the black wire is cathode.These pre-wired LED bulbs are perfect for creating your own custom LED setup!Use them to make headlights for your cars and trucks, wing lights for your planes.
• Package included:20pcs Pre-Wired leds.

User questions & answers

Question:	What specifications of dc motor should i buy to light up this led
Answer:	I hooked it up to a 12 volt DC power pack. Lighted all the way up to 12 volts (no resistor needed) without it burning out. Good for any place that you need a 5 mm light. Being a LED, it only lights in one direction. Change polarity and won't light.
Question:	My transformer accessory output is 19 vac. will these work with this output
Answer:	No. You need DC volts only. Once you connect to a DC output, if it doesn't light, just reverse the leads on the LED and it will light. You can buy any low cost plug-in wall DC transformer and it will work. I t will even light with a 9 Volt battery.
Question:	Can you put these leds in a ho or n scale train engine to replace the regular bulb
Answer:	These are 5MM bulbs. Using them in N scale (to me) would not work as the N scale engines headlight would be too small. For HO, again, it would depend on the size of the headlight socket. Also, these show a bright light. To me, you would need some size resistor to reduce the glow.
Question:	What guage are the wires
Answer:	not sure but they work with my husband HO track.. came with no instructions or paperwork

Product description

Features:

100% Brand new and high quality.Perfect for Railway & Building Layout!

Made with white LEDs.Complete with wires and LEDs and can be lighted.

This scale lamp is very helpful props for model train Layout and Architectural building,train station layout ,school project model and miniature dollhouse.

These Lampposts are suitable for use at supply voltages of 3V only.

DO NOT use them on 12V or 16V directely to avoid damaging the LED.You must connect a resistor in series before you will use them on 12V or 16V, I will supply compatible resistors for free.

Please apply correct Operating Current 20mA to each LED too.

Specifications:

Brand:evemodel.

Size: Adjustable height upto 80mm(+/-4mm).

Reference Scale: 1:87~1:120,Suitable for HO scale or TT scale etc....

Operating Voltage: 3V, AC or DC Compatible.

Operating Current: 20mA.

Material: Steel Column Model Lampposts.

Emitting color:Bright White.

Package included:

10 Complete lamps.

10 Resistors (not pre-soldered) for 9~18V operation.

• Size:Adjustable height upto 70mm(+/-4mm) or 2.76inch.
• Reference Scale: 1:87~1:120,Suitable for HO scale or TT scale etc....
• Emitting color: Bright White.
• Operating Voltage: 3V, AC or DC Compatible.Operating Current: 20mA.
• Material: Steel Column Model Lampposts.

User questions & answers

Question:	What resistor do I need to use these led lights? Is the resistor available on Amazon
Answer:	the resistor I believe you can get on amazon don't hook it to the acc terminal or the light will blow need small amp usually there is a panel with several connections you can hook them up to try ho train acc look under lights they should have a panel for the lights the panel hooks up to the acc terminal there is a reducer in panel so the light doesn't blow I think its called a reducer panel I hope this helps also find a hobby store near you see what they say
Question:	can these be used will woodland scenics power supply
Answer:	Anything above 3 volt you will need a resistor according to line voltage.
Question:	If I put all 10 in series do I still need a resistor if so just 1 or on all of them
Answer:	Always need a resistor no matter the voltage. Once a led hits its voltage of 3v the led will draw unlimited amps and burn out. For a 12 v DC system you will need 450 to 1000 ohm resistor.
Question:	Is the power source included or do i purchase separately
Answer:	No there is no power source. You have to purchase one.

• This product is installed with stretchable small lens,with chioce od different magnification during operation,making operation more confortable.Three kinds of different stretcgable gears are available to increase range of visual firlds.
• Independent 5 LED light design makes magnifier and lighting device relatively independent.Distance and angle of lights can be adjusted freely.And this magnifier can be used separately as desk lamp.
• This product can use external power.When external power is used,built-in batteries will automatically disconnet.External power (input:AC100-250v,50/60HZ,output:DC4.8V,500mA)
• This product has three built-in AAbatteries.(not included).Pull out the plug of external power if batteries are used for lighting.
• USES: Hand Lens Close Work include Soldering,Building Models, Hobby Arts & Crafts Projects, Painting Miniatures, Sawing Applications, Diamond/Jewelry Cleaning & much more.

User questions & answers

Question:	How tall is the set
Answer:	8" tall.
Question:	Does it come with a usb or an elecyrocal plug
Answer:	elecyrocal plug
Question:	Did it come with a euro plug or a usa plug
Answer:	USA plug
Question:	Is this made in China
Answer:	Every damn thing is made in China

Product features

Features:

• Electronic energy-saving shadowless lamp,light is stable and reliable,no flicker,no effect on vision.Electronic start-up circuit,power and brightness appropriate.
• Magnification and lighting dual combination,so that the observation clearer,more micro.
• The direction of 360 degrees arbitrarily adjusted according to different needs at any time to adjust the viewing angle and position.
• Precautions:
• 1. Do not expose the magnifying glass to sunlight and do not focus it with your eyes to avoid burning your eyes.
• 2. When direct sunlight,do not place flammable objects under the focus
• Warning:using handtools can be dangerous.Always take care,and keep away from children,wear protective eyewear in work area at all times.Select correct type and size of handtool for word.
• Application range :Electronic welding,modelling,stamp collecting,embroidery,antiques,biological observation,reading etc.

Product description:

• 1. Material: Aluminum alloy & optical glass
• 2. 3 Lens Size: 2.5 x 90mm / 5 x 34mm / 8 x 34mm
• 3. Power Source: 3 x AA batteries(Not Included) / charger adapter
• 4. Application: Electronic welding / modelling / stamp collecting / embroidery / antiques / biological observation / reading

Precautions:

• 1. Do not expose the magnifying glass to sunlight and do not focus it with your eyes to avoid burning your eyes.
• 2. When direct sunlight, do not place flammable objects under the focus.

Power Source: 3 x AA batteries(Not Included)

Charger adapter

LED Illumination

Magnifying Lens

Product description

Features:

100% Brand new and high quality.

Ideal for model railway use lighting buildings,rolling stock street lights etc.

These bulbs come pre-wired for easy connection to any 1.5v AC or DC power supply.

For optimal insulation with minimal outside diameter and at the same time "water-like" softness, stranded micro litz wire with only 0.7mm in diameter is used.

Specifications:

Brand:evemodel.

Size:The bulb Approx. 3mm(Φ), 7mm(Length); The wire leads about 20cm(L).

Rate voltage: 1.5V, AC or DC Compatible.

Rate current:100mA.

Emitting color: Warm White.

Package included:

50pcs water clear mini pre-wired bulbs.

• Size:The bulb Approx.3mm or 0.12inch(Φ), 7mm or 0.27inch(Length); The wire leads about 20cm(L).
• These bulbs come pre-wired for easy connection to any 1.5v AC or DC power supply.
• For optimal insulation with minimal outside diameter and at the same time "water-like" softness, stranded micro litz wire with only 0.7mm in diameter is used.
• Brand:evemodel.Rate voltage:1.5V, AC or DC Compatible.Rate current:100mA.Emitting color: Warm White.
• Package included:50pcs water clear mini pre-wired bulbs.

User questions & answers

Question:	Any idea how long the bulb will stay lit for a AA battery
Answer:	I was actually poking around with these last night. One bulb draws between 800-900mA. Wikipedia states that alkaline AA batteries have 1700mAh to 2850mAh. Optimistically (800mA bulb and 2850mAh battery) it might last up to 3.5 hours. Pessimistically (900mA bulb and 1700mAh battery) it might not last more than 1.75 hours.
Question:	will these work for ho scale locomotive head lights
Answer:	NO.This pre-wired bulb is not suitable for ho scale locomotive head lights. I recommend you use the pre-wired SMD LED.Such as C0402,C0603,T0603...
Question:	I am building a 1:72 ship model and am adding deck work lights and was curious if these would fit the bill
Answer:	After buying these, I decided to use LED's instead because their life span is far greater than incandescent bulbs and can also be battery operated with the correct setup. If you do some research online, you can find mini LED's that fit the bill. Otherwise, these 1.5V bulbs are fine.
Question:	Ok for doll house lamps? 1/12 scale. I want to wire a house with 6 lights to run on 2 aa batteries
Answer:	Yes they should work beautifully, but you will have to wire two in series for brightness or even three in series for not so bright.

Product description

DIY Miniature set model—Temple of serenity

This unique mode kits is inspired by classical Asian architecture, made from natural wooden materials, with Laser Cutting technology, nontoxic, environmental friendly. It will make you calm, inner peace, and untroubled. It can be not only a DIY toy kits but also a nice plants decor and home decorations with the shine bright LED lights.



Whats the’ package:

✔ laser-cut wooden puzzle board×3

✔ English instructions×1

✔ LED strip lights×1

✔ sandpaper×1

✔ Little surprise×1



Satisfaction guarantee:

The kits have been inspected 100% carefully before delivery, so as to ensure that the accessories are complete and no missing part. If any question when you assemble, please fell free to connect us, we will solve any problem asap.

• ✅【Temple of Serenity】Inspired by classical Asian architecture, made from natural wooden materials, with Laser Cutting technology, nontoxic, environmental friendly. It will make you calm, peaceful, and untroubled.
• ✅【Unique Decorations】Transform your plant pots into miniature wonderlands with these DIY model kits and be the envy of every plant owner in town. In addition, it can be used as a great home decor, in the study/living room, on the desk with LED strip lights.
• ✅【Educational STEM Toy】This building model for kids encourages problem solving skills, concentration, patience, attention span and develops child’s intelligence. It is a Fun, educational, and engaging activity for adults and children to do together.
• ✅【BRILLIANT GIFT】The brain teaser will amaze anyone on any occasion, At Christmas, new year, birthday, Valentine’s day as a best gift to a boyfriend, son, father, girls adult aged 14+. who is model builder puzzle lover or plant lovers. It looks so cool and creates a decent challenge for an adult.
• ✅【Important Note】The kits have been inspected 100% carefully before delivery, so as to ensure that the accessories are complete and no missing part. If any question when you assemble, please fell free to connect us, we will solve any problem asap. Besides,you need to prepare two pcs batteries(type AA) by yourself, because they are forbidden to ship by air transportation.

User questions & answers

Question:	What kind of packaging is it? Can it be used as a birthday present or Christmas gift
Answer:	Approx 11 x 17 inches
Question:	Any missing pieces or broken
Answer:	Not included with this kit.
Question:	Is this doable for someone's first 3D puzzle
Answer:	Just get some 3-in-1 craft glue. Works great on these kits.
Question:	How long will it take to finish this 3d wooden puzzles
Answer:	The books seem to be but the furnishing seem a little smaller. I haven’t done the conversion measurements though so it could be true.

Product description

Description



This item is made of resin, safe, environment-friendly, practical and durable. It is brand new and of high quality. Perfect for railway and building layout. It can make your micro model landscape more abundant and beautiful.



Features



- Color: Black.

- Material: Resin.

- Size: 7.5x2x2cm.

- This item is made of resin, safe, environment-friendly, practical and durable.

- It is brand new and of high quality.

- Perfect for railway and building layout.

- It can make your micro model landscape more abundant and beautiful.

Warm Tip: Dear buyer, due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!



Package Including



10 x mini street lamp post

• Mini street lamp model measures about 7.5 x 2 x 2cm.
• Made of resin, safe, environment-friendly, practical and durable.
• Microscopic Model Lights for Miniature Doll House Decoration.
• This mini lamp is helpful prop for railway and building layout.
• It can make your micro model landscape more abundant and beautiful.

User questions & answers

Question:	How are these lights powered
Answer:	They don’t light up....I used them in an ornament craft project and put some glow in the dark paint on them.
Question:	Are these hollow on the inside such that I could use my own lights to light them up
Answer:	They are decorations.

• 1.[2 in 1 magnifying glass lamp, Stable Clamp & Heavy base holder] You can clip it onto any desk corner or where you want to use it, or directly clip it onto the table base holder when you want it to be a independent portable desktop magnifier lamp.
• 2.[2X magnification, 4’’ Large diameter magnifying glass lens] You will get a clearer world from broad vision through this large diameter magnifier glass easily. Ideal for daily reading, circuit boards, electronic component soldering repairs, sewing, needle point, diamond painting, model making, crafting, workbench, etc.
• 3.[Adjustable brightness, 3 settings, Bright light magnifier] Different light brightness levels, comfortable bright light. Just do what you want to do freely, even in a dark place.
• 4.[Touch Switch, Bendable gooseneck, Hands free] Easy operation, bendable but stable gooseneck, it could be at lots of angles. You will have your hands free with this clamp & table base holder magnifier glass.
• 5.[High quality, great customer service] If you are not satisfied for any reason, please let us know and we will make things right.

User questions & answers

Question:	What is the color temp and lumen output of leds
Answer:	Very little heat. My face is right next to it for hours a day and I never feel any heat. It has three settings and it is very bright. I have no idea the distinct lumen number but I love it. It works great!!!
Question:	What are the specifications on the power cord if someone were to say...completely lose it? what type of power input is it called so i can find one? ty
Answer:	The end of the cord from the charger is a regular USB plug. The end that plugs into the lamp base is a 1/8" round plug about 3/8 inch long. It appears to be a plug that would fit a game toy or similar. You should be able to a replacement either from the manufacturer or an electronics store. I have an identical power cord that plugs into my Roku 3.
Question:	How long is the power cord
Answer:	It’s around 3 to 4 ft long.
Question:	Does this magnify enough to paint tabletop miniatures
Answer:	I think so, it magnifies very small items on my paint by numbers to a very large size. I love it. I have difficulty seeing small things or seeing up close and this works so well that I will immediately get another one if this one breaks.

Product features

This magnifier glass can have your hands free so you can always do your crafts, hobbies, daily reading and work comfortably.

It has 3 settings for the bright light, so you can do your work or read small prints under this magnifying glass light in different dark conditions.

The whole stable magnifying glass lamp is made of high quality material. One time purchase, Long time enjoyment, high cost performance.

Practical, special and modern gift for yourself, your family, friends and partners.

It is really a helpful tool for those who need to see small details, and who have poor eyesight, especially for old people with aging eyes.

Manuals, instructions, messages, texts, dictionary, they won't be afraid of those small prints anymore.

They can read small things easily and happily again!

This magnifying glass is a clamp magnifier, it is a desktop standing magnifier, it is a magnifier lamp.

It has both stable clamp and heavy base holder so you can use it in different places freely, clamp it onto any desk corner, or clamp it onto its heavy base holder then just put it on the desk.

Specifications

• Magnification: 2X
• Gooseneck material: Stable and flexible metal
• Gooseneck length: 13.5 inches
• Clamp & Base holder material: Metal
• Magnifier glass lens diameter: 4 inches
• Brightness: Adjustable, bright light, 3 options
• Product dimension: 18.7 * 6.5 * 2.2 in
• Product weight: 2.38LB

House workers, DIY art crafters

Have your hands free, show more details when you need to do your housework or DIY art crafts. Such as: sewing, needle point, diamond painting, model making, etc.

Family/Professional Electronic engineers

With this magnifier glass, you can do your family repairs or professional circuit boards, electronic component soldering repairs more carefully and precisely.

Hobbyists, aging eyes

Perfect tool for hobbyists who like collecting coins, stamps, festival greeting cards, jewelry, etc. It is life saver for some people with poor eyesight, especially for aging eyes.

Product description

Specifications:

◎18pcs Energy Saving SMD LEDs

◎2X-4X Magnification

◎3 Brightness Levels

◎Flexible Metal Gooseneck

◎Lens Diameter: 4.3"

◎Heavy-Duty Metal Clamp

◎50,000 Hours LED last up, no need to change bulb

◎Product Dimensions: 18.7in x 6.5in x 2.2in

◎Weight:38.9oz

Choose Joypea, Enjoy Healthy Life!

◎If there is anything puzzles you about the page, please feel free to contact me. It is a pleasure to provide the best service for you!

Package Contents:

1 x Magnifier Lamp

1 x USB Cable

1 x Instruction

• EYE PROTECTION - Our eye-care bedside reading light made of 18pcs LED bulbs produce soft light, no flickering, no dazzling, no harsh to eyes, no-radiation.What a great table lamp for reading on bed or desk.
• EASY CONTROL SWITCHES DIMMER - The switches on the 5 feet long cord helps you get the right flow you need.Easy changing the color temperatures and brightness by pressing on the button.
• Joypea Magnifying Glass Lamp has a 20 inch gooseneck that bends in any direction - you can position the light and magnifier perfectly, and adjust it without loosening or tightening knobs to place your book light for best viewing.
• This lamp has a 5 Watt energy saving dimmable daylight LED light, which will last for over 20 years without burning out or overheating.USB powered daylight bright LED light with 3 brightness levels, effectively illuminates your desk without glare or eye strain.
• The clamp can firmly hold onto a desk, bedhead,edge, space saving and offering hands free magnifier and light. Ideal for reading books, sewing, cross stitch, knitting, jewelry making, needlepoint, painting, embroidery, repairing electronics etc.

User questions & answers

Question:	Does the light have to stay plugged into the USB to work or just to have it charged
Answer:	Yes. It does not have a battery. You can use a portable charger if you need to move it where there is no usb available.
Question:	can the magnifying glass be removed from the lamp
Answer:	No, it is one solid piece.
Question:	Is the lens glass or plastic
Answer:	The lens is glass.
Question:	How many lumens
Answer:	it doesnt say...but has 3 levels...low to very bright...love it!

• diy dollhouse
• Imported
• SUPER CUTE AND COOL
• Step by step pictorial instructions easy to follow
• Very well made and super fun to put together
• Perfect presents for birthday and all festivals such as xmas
• Replacement parts service one‘s times per order complimentary that make sure you finish it.no regret.

Product features

Instructions:

Thanks you for choosing the Rylai DIY dollhouses,This dollhouse is included all of furniture and accessories that you see in the pictures.

• Mainly through the DIY process like bonding, assembling, sewing, shape, placement etc to finish it.
• Glue and battery is not included because it's forbidden to ship by air. We suggest you to buy the Latex glue or UHU glue.
• Need Scissor, Tweezer, Pincer or Sandpaper sometimes to support
• Assembly time needed:5-15 Hrs
• Assembled Size: (L) 3.3" * (W) 3.3" * (H) 4"

Product description

Features:

100% Brand new and high quality.

Ideal for model railway use lighting buildings,rolling stock street lights etc.



Specifications:

Brand:Evemodel.

Size: The bulb Approx. 3mm(Φ).

Forward voltage: 12V, AC or DC Compatible.

Forward current ：60mA.

Emitting color: Warm White.



Package included:

100 water clear mini bulbs.

• Size: The bulb Approx. 3mm(Φ).
• Forward voltage: 12V, AC or DC Compatible. Forward current ：60mA.
• Emitting color: Warm White.
• Package included:100 water clear mini bulbs.
• Ideal for model railway use lighting buildings,rolling stock street lights etc.

User questions & answers

Question:	Are the leads bare wire or insulated? What is their wire gauge (approximately
Answer:	You need to use 3 batteries. They are cr1130. Make sure you put gray with gray wires all the way down. And white to white wires all the way diwn. I used black electrical tape once I twisted wires. Hope it helped.
Question:	How long did the bulb last before burning out again
Answer:	I comes with the box. I'm not sure if the deer was with it and my daughter chose not to use it or there just wasn't one.
Question:	Showing my spot on the learning curve here...if adding these to a dollhouse running through a 12v transformer do I need to add a resistor
Answer:	I wonder if you can email the company? The first box I was sent had everything but the music box. I emailed them and they sent one to me. Maybe you can buy one from them?
Question:	does anyone know what type of metal the leads are
Answer:	Not really. You just have to turn it until it looks like the picture

Product description

Features:

100% Brand new and high quality.

Ideal for model railway use lighting buildings,rolling stock street lights etc.

These bulbs come pre-wired for easy connection to any 12v AC or DC power supply.

For optimal insulation with minimal outside diameter and at the same time "water-like" softness, stranded micro litz wire with only 0.7mm in diameter is used.

Specifications:

Brand:evemodel.

Size:The bulb Approx.4mm(Φ), 7mm(Length); The wire leads about 20cm(L).

Rate voltage: 12V, AC or DC Compatible.

Rate current:70mA.

Emitting color: Warm White.

Package included:

50pcs water clear mini pre-wired bulbs.

• 100% Brand new and high quality.Ideal for model railway use lighting buildings,rolling stock street lights etc.
• These bulbs come pre-wired for easy connection to any 12v AC or DC power supply.
• For optimal insulation with minimal outside diameter and at the same time "water-like" softness, stranded micro litz wire with only 0.7mm in diameter is used.
• Brand:evemodel.Size:The bulb Approx. 4mm(Φ), 7mm(Length); The wire leads about 20cm(L).Rate voltage:12V, AC or DC Compatible.Rate current:70mA.Emitting color: Warm White.
• Package included:50pcs water clear mini pre-wired bulbs.

User questions & answers

Question:	can these bulb wires be soldered you one wire and plugged into 12V dollhouse transformer? Want to make miniature chandelier with 8 bulbs
Answer:	Yes, the leads are bare and I would guess that the gauge is around 20-22. They are tiny - I used them to replace burned out bulbs in the a/c controls of a Jeep Commander...
Question:	When hooking up these to your power supply do you need to install resistors and if so what size
Answer:	None of the bulbs I have used have burned out again as of yet. They are all still working properly.
Question:	Recently purchased the lights for my train layout, waiting for arrival. please recommend a 12 volt ac transformer with a rheostat to operate 25 lights
Answer:	No, a resistor is not necessary, however, if you wish to dim the bulbs, a resistor can be used. I would say these are of average brilliance without a resistor.
Question:	can you recommend a 12v power supply that would be ideal for these
Answer:	They seam to made of steel. They will hold the bulb at any position you bend them. I think they are to stiff to be copper.

• 【Multiple Magnification Lens】 3 kinds of interchangeable magnifying lens: 2.5X 90mm (diameter), 7.5X 34mm, 10X 34mm.Useful auxiliary tool in soldering and modelling field.
• 【Convenient and Comfortable To Use】Desktop magnifier with led light. Distance and angle of lights can be adjusted freely,what's more, the support clamps and alligator clips are adjustable ,so you can feel more convenient and comfortable when you use it.
• 【Humanization Design】Desktop magnifier with led light, an independent bright illuminating light with 5pcs of LEDs is installed on flexible metal tube, distance and angle of lights can be adjusted freely.It can be used as a desk lamp.
• 【Powered By】Power supply by external adapter or 3 * AA batteries (Not Included).
• 【Application Range】Hand Lens Close Work include Soldering PCB’s, Macro Photography, Craftsmanship Engraving, Electric Circuit Board Repairs, Building Models, Hobby Arts & Crafts Projects, Painting Miniatures, Splinter removal, Needlepoint Work, Sawing Applications, Diamond/Jewelry Cleaning & much more.

User questions & answers

Question:	Will this stand hold XLR cable ends for repair or is the holding clips too small
Answer:	Yes they can as these bulbs are standard incandescent, so polarity is not an issue. That said I would wire in parallel and not series so that if one burns out you don't loss the whole light, just the bulb.
Question:	Can it be handheld
Answer:	If a 12v supply, then no. Otherwise, for higher voltages, you will need appropriate dropping resistors of adequate power. As with any incandescent bulb, brightness will be affected by voltage, and so will bulb life. I haven't tried on lower voltages, but I would think anything down to 9v should work satisfactorily.
Question:	Just to be clear does this unit comes with a USA standard electrical outlet plug
Answer:	Watched a YouTube video by a guy with more than a hundred lights on his indoor G scale layout. I followed his recommendation and purchased a 12volt 6 amp transformer for $16. It’s a type used for charging things. 6 amps will light 72 bulbs.
Question:	US power adapter included
Answer:	As long as it is a 12v power supply,the bulb will work well.

Product features

Beileshi 2.5X 7.5X 10X LED Light Helping Hands Magnifier Station,Magnifying Glass Stand with Clamp and Alligator Clips

Useful magnifier with interchangeable magnifying lens and illuminating led lights, it can be widely applied to electronic welding, modelling, stamp collecting, embroidery, antiques, biological observation, reading, etc.

The support clamps and alligator clips are adjustable. Ideal tool when third hand is required. The base surface is padded with steel sheet to increase base weight and reinforce stability. Powered by external power adapter of 3 * AA batteries (not included).

Read Maps

Integrated Circuit

Watch Repair

Model Painting

Alligator Clips

The Alligator clips can be adjusted freely, so you can feel more convenient and comfortable when you use it.

Magnifying Lens

3 kinds of magnifying lens: 2.5X, 7.5X, 10X. Useful auxiliary tool in soldering and modelling field.

LED Illumination

An bright with 5 LED illuminating light is installed on flexible metal tube, distance and angle of lights can be adjusted freely. So it can be used as a desk lamp.

External Power & Battery Holder

Input 110-240V 50/60Hz, Output: DC 4.8V 250mA also can powered by 3 * AA Battery (Not Included)