12 best millermatic welders

Product description

Millermatic(R) 211 MIG Welder With Advanced Auto-Set(TM) 951603 The Millermatic(R) 211 Advanced Auto-Set(TM) with running gear and cylinder rack is a multi-voltage, 230 amp portable MIG welder that runs on both 120 volt and 240 volt input power. The inverter design of the Millermatic 211 means it draws less power, has a superior welding arc and weighs up to 40% less than other MIG welders in its class. The Millermatic 211 weighs only 38 pounds and is capable of MIG welding mild steel up to 3/8 inch thick. It features Advanced Auto-Set, which eliminates the guesswork of setting voltage and wire feed speed for your MIG welding application. Simply select the material thickness and wire diameter while the welder is in the Auto-Set mode, and you are ready to weld. The Advanced Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild

User questions & answers

Question:	What is included in this kit? Any additional accessories needed prior to using it
Answer:	No case or attachments.
Question:	Come with gauges for gas
Answer:	Mine came with the accessories. Best put in a claim.
Question:	Does this work with 230V/50Hz
Answer:	I think it would probably soften old putty - but I would be very careful not to crack the glass. It can get very hot.
Question:	Where is the welder made
Answer:	Yes, I believe this heat gun is powerful enough to melt pvc pipes, on the high heat setting you can actually solder domestic copper pipe so I assume it would heat pvc to the point it would ignite.

Product description

Premium quality MIG welding gun package M-100 or M-10 (100Amp)/M-150 or M-15 (150Amp)/M-25 (250Amp) with 10-ft (3m)/12-ft (3.7m)/15-ft (4.6m) cable. Ideal replacement for Miller Millermatic M series or Hobart H series MIG gun torch stinger. Works with Miller/Hobart machines: M-100/M-150 (100A/150A): Sidekick, Cricket, Millermatic 35/90/120/130/130XP/135/140S/175/180S/DVIs/Challenger/Challenger 172/185/Passport/Passport Plus/Pulser; M-25 (250A): Millermatic 200/210/212/250/250X/251/252/Vintage; Also works with many models of Hobart Handler and IronMan welders. (Check you user manual for compatibility).Miller referenced part number: M-100: 248282 (10-ft); M-150: 249039 (10-ft)/249040 (12-ft)/249041 (15-ft); M-25: 169594 (10-ft)/169596 (12-ft)/169598 (15-ft).See all listed pictures for part details. Check your welder's user manual and existing mig gun for front-end consumables as well as rear plug/control line connector for compatibility.

• Premium quality MIG welding gun package M-100 or M-10 (100Amp)/M-150 or M-15 (150Amp)/M-25 (250Amp) with 10-ft (3m)/12-ft (3.7m)/15-ft (4.6m) cable. Ideal replacement for Miller Millermatic M series or Hobart H series MIG gun torch stinger.
• Works with Miller/Hobart machines: M-100/M-150 (100A/150A): Sidekick, Cricket, Millermatic 35/90/120/130/130XP/135/140S/175/180S/DVIs/Challenger/Challenger 172/185/Passport/Passport Plus/Pulser; M-25 (250A): Millermatic 200/210/212/250/250X/251/252/Vintage; Also works with many models of Hobart Handler and IronMan welders. (Check you user manual for compatibility).
• Miller referenced part number: M-100: 248282 (10-ft); M-150: 249039 (10-ft)/249040 (12-ft)/249041 (15-ft); M-25: 169594 (10-ft)/169596 (12-ft)/169598 (15-ft).
• See all listed pictures for part details. Check your welder's user manual and existing mig gun for front-end consumables as well as rear plug/control line connector for compatibility.
• US based welding supplier. Strong technical support with experienced customer service to address buyer's any question.

User questions & answers

Question:	The retainer that stops the nozzle from sliding back onto the neck cracked and broke off. Can I order a replacement somewhere
Answer:	Not sure if any parts are available. If this was a Miller Gun and cable assembly, yes you could buy parts.
Question:	Will it fit Millermadic
Answer:	In the description it says it is a 150 amp gun. Why would you put a 150 amp gun on a 210 amp welder? I absolutely would not recommend this gun for a 210 amp welder
Question:	will it work on my lotos mig140 140amp
Answer:	Yes if the original mig torch is miller m-150 or Hobart h-9/10. Thanks.
Question:	Will this work for miller
Answer:	I used it on a Miller 135. Find out if the 135 and 185 are compatible
Question:	can i weld aluminum with this welder
Answer:	Yeah, but you will need the proper gas for it.
Question:	Why does it come w/ gas guages
Answer:	It is a mig/flux cor welder. You will need the gauges and a cylinder of gas to "Mig weld" though.
Question:	What is the duty cycle on this rig
Answer:	I'm not sure, because I have welded continuously for a couple hours and never had it shut off even at full power welding quarter inch angle iron.
Question:	Is this Miller part number 907614? Can it use 110 and 220 volt input
Answer:	The 141 110 only

Product description

Easy to use machine to increase efficiency and productivity for the light manufacturing and fabrication users. Color screen featuring Auto-Set Elite and Pulsed MIG. This all-in-one welder connects to 208 or 240 volt input power. Welds up to 1/2” aluminum. Includes MDX-250 MIG Gun w/ AccuLock S consumables AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock S contact tips provide superior Spray and Pulsed MIG arc performance For portability and reliability, this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.

• Pulsed MIG welding delivers higher quality Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
• Easy-to-understand interface 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
• Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
• Program mode allows easy save and recall of favorite weld settings Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
• EZ-Latch running gear Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.

User questions & answers

Question:	How many Amper
Answer:	30
Question:	what length are leads
Answer:	The MIG gun is 15 feet in length.
Question:	Can I run this off of 30 amp dryer plug
Answer:	Yes
Question:	Does it come with the cart
Answer:	Yes
Question:	What is included in this kit? Any additional accessories needed prior to using it
Answer:	extra welding tips that match the OD of the wire you use
Question:	Come with gauges for gas
Answer:	Yes, has guages for Argon/CO2 gas
Question:	Where is the welder made
Answer:	I would imagine it’s sourced from components all over the world. I’ve owned Everlast tig welder and I ended up buying Miller 215 because I wanted stick welding. It is very good mig and burns 7108 3/32 beautifully
Question:	Does this work with 230V/50Hz
Answer:	This machine will work with 230V/50Hz power.
Question:	So what size wire and breaker do you need to run to run this unit
Answer:	General household for welder
Question:	Is this a welder or a plasma cutter
Answer:	it is 110V&220V arc welder
Question:	can you run this welder of a regular 5000 watt generator
Answer:	yes,it can
Question:	if this has hot start, what percent of the Amp setting it's set at? Arc Welding machine
Answer:	It is hot start. Amperage can be adjusted according to your application( meaning depending on the material to be welded and the size of the electrode). U just welded with 3/32 elextrode and it did an outstanding job. It melted the electrode beautifully. ( Hola Cindy. You have to hire me as a reviwer of your welders). I am an independent user
Question:	Can I weld aluminum
Answer:	You can only AFTER you convert it to gas and use CO2
Question:	stas soldadora necesita gaso trabajas Sin ganas
Answer:	Noh
Question:	What is the difference between this one and Pro Core
Answer:	This is a 70 amp out put. This is gasless only . Use flux core wire .035
Question:	What is the maximum amperage output
Answer:	The output range is 35-88 amps, but the recommended output is 70 amps at 20%.

Product features

Lincoln Electric K2278-1 Handy Core

The Handy Core wire feeder welder from Lincoln Electric is a tremendous asset when home repair or hobby projects are in your game plan. It's a great pick for welding 18 gauge to 1/8" mild steel and comes with everything you need to get started fast. This package sports a gun and cable assembly, work lead, work clamp and input power cable – all attached at the factory to save you time. A spool of self-shielded, flux-cored wire electrode, welding handshield, and chipping hammer/brush round out the line up. So, don't delay – add the Handy Core to your tool shed or garage today!

• 35-88 amps output.
• Welds up to 1/8 in. mild steel.
• Plugs into household 115V, 20 amp outlet.
• Cold contactor safety feature keeps welding wire electrically “cold” until gun trigger is pressed.
• Compact, portable, lightweight and easy to use.

WELDER

Feature:

1 Energy-saving and stable heat dissipation ：Whole day welding is no problem,energy-saving design,it is applicable for welding all kinds of ferrous metals such as carbon steel, medium carbon steel and alloy steel amongst others

2 IntuitiveFeaturing controlling knob,convenient：Portable size but big power,it's not just a welding machine but a work of art.

3 Suitable for welding stainless steel, mild steel and other metal materials. Arc welding machine is easy to use,beginner can also operate well.

4 Over-heating protection, over-voltage protection, over-current protection.The welding voltage can be continue adjusting to exactly match welding current.

5 Convenient quick connection for the output makes it quick, safe, simple.On-off frequency is out of audio frequency,nearly abate the noise pollution

Special welding dynamic characteristic control the circuit,stable welding arc

Little spatter,good welding surface,high welding efficiency

ARC WELDING MACHINE

The machine is equipped with high-efficiency and low-cost cutting technology, can be widely used in automobile manufacturing, plumbing work, metal processing ,strict construction work, site work, high-quality welding and thin material precision welding.

HIGH EFFICIENCY FAN

High-performance fully mute fan motor with instant cooling function, promote body heat dissipation, The synchronous control system provides protection mechanisms.

• 【HEAVY DUTY】: STW jacket and 8 AWG (American wire gauge) x 3C all-copper wires with 6-50 NEMA plug and connector perfect for heavy-duty performance
• 【GREAT COMPATIBLE】: Miller Millermatic welders, Lincoln Power MIG series welders, Hobart Handler, Ironman and Betamig welders, Century welders and many more.Designed for indoor and outdoor heavy industrial use. ​​​​​​​
• 【WELDER EXTENSION CORD】: Rated at 50A, 250V, 25 feet, features excellent abrasion, oil and moisture resistance and flexibility fits to extend the welding machine. Does NOT fit standard household outlets.
• 【LONG ENOUGH】: The 25 feet heavy duty welder machine cord provides length enough, allows you to move your welder around the shop and close to your welding work piece for added convenience.
• 【SAFETY IN MIND】: The clear lighted end receptacles provide a power indicator, which shows power is on and cord is ready to use, for you provide optimum performance and added safety.

Product features

Fitment:

It will fit most welders including:

Miller Millermatic welders, Lincoln Power MIG series welders, Hobart Handler, Ironman and Betamig welders, Century welders and many more.

Designed for indoor and outdoor heavy industrial use. ​​​​​​​

RELIABLE AND SAFE CORD

provids the most reliable and safe cord for customers.

HEAVY DUTY

8 AWG x 3C all-copper wires

6-50 NEMA plug and connector

SAFETY IN MIND

The clear lighted end receptacles provide a power indicator, which shows power is on and cord is ready to us

GREAT COMPATIBLE

Ideal for heavy duty industrial use and compatible with most welders on market

Product description

Cover fits the following Millermatic models: Millermatic 141 Millermatic 190

• The Millermatic protective cover protects the finish of your Millermatic 141 or 190 MIG welder.
• These covers are made of flame and tear resistant woven nylon, have a mildew resistant odor-free bar
• Covers unit with weld cables connected
• Oversized storage pocket can be used to store cables
• Cutout allows access to handle for portability

User questions & answers

Question:	Will this fit the new miller 211 MVP
Answer:	Hi there is not display to show temperature. But variable temperature can be adjusted by rotating the back cover. Quite simple and convenient. Temperature range is from 120°F-1020°F ( 50-550℃)， which is different from other dual temperature heat gun.
Question:	Will it fit a miller 215 welder
Answer:	The hard shell case was a selling point. But I know Wen tools in the 70's I worked for Wen in Chicago. There products are good products.
Question:	How many pockets does it have
Answer:	It sounds to me like a slightly louder hair dryer, to be honest. Never used the other heat guns you mention here, so I can't really compare
Question:	Will it fit a millermatic
Answer:	Haven't tried latex, used on oil paint and wax.

Product description

MIG Welder, Millermatic 141, Welding Processes MIG/Flux Core, Input Voltage 120VAC, Welded Material Mild Steel, Stainless Steel and Aluminum, Mild Steel - Material Thickness 24 ga. to 3/16 In., Portability Handheld Portable, 1 Phase, Aluminum - Material Thickness 14 to 18 ga., Stainless Steel - Material Thickness 20 ga. to 1/8 In., Rated Output 90A @ 18.5VDC, Duty Cycle 20 Percent, 60 Hz, 20 Input Amps, Output Range 30 to 140A DC, Wire Size 0.023 In. to 0.035 In., Flux 0.030 In. to 0.035 In.

• Occupational Health & Safety
• Country of Manifacturer: United States
• Manufacturer: Miller Electric

User questions & answers

Question:	can i weld aluminum with this welder
Answer:	the 3.3s volt is a "Signal" voltage. It is not meant to drive a relay. You need more power to do that. Use a different kind of relay or build a driver circuit. Then you can use the signal "3.3v", to turn the relay on and off.
Question:	Why does it come w/ gas guages
Answer:	The signal goes high for about 2 seconds after sensing motion. That high signal will match the Vcc you provide, and can drive a 10mA LED by itself. I had trouble turning on a transistor for some reason, but it will light an LED by itself, just give it power.
Question:	What is the duty cycle on this rig
Answer:	no! Still trying to figure out how to wire!!
Question:	Is this Miller part number 907614? Can it use 110 and 220 volt input
Answer:	Hello, very easy the connection,you have 3 connectors, one is the positive, you need to check the Positive (+) sign and the other is the negative (-) , the middle one is the trigger signal when movement sensor works. You cannot adjust the time for trigger to be "ON" , normally is 14 seconds that stay active. Very careful to connect positive and negative, this units is very easy to burn

Product description

Features :

Front pocket to accommodate cable and small parts.

Top hole for handle.

Water-proof, UV resistant, dustproof.

Strong handle.

Heavy duty material.

Fine and firm sutures.

Collapsible, saving storage space.

Light weight material.

Washable.



Fits for: Millermatic 140, 180, & Older Model 211 MIG Welders

 

Specification :

Material: Vinyl

Colour: Blue

Size: 47*28*37cm/18.5"x11"x14.6"

 

Package includeds :

1 x MIG Welder Cover

• Front pocket to accommodate cable and small parts.
• Top hole for handle.
• Water-proof, UV resistant, dustproof.
• Strong handle.
• Heavy duty material.

Product description

This conduit liner is designed for use with the M-Series 360° rotatable gooseneck MIG welding gun. Liner, Replacement

• Sold on Amazon

User questions & answers

Question:	will this fit hobart handler piecemaker 14a gun
Answer:	I’ve tried to have several of mine #Warranty that broke and have been unable to get a hold of anybody to help with the warranty
Question:	has anyone tried this on a 252 miller
Answer:	Hi thank you for your question. The heat gun will reach the highest temperature in about 40 seconds.
Question:	Will this liner fit my Miller 200mig gun? serial # KA754791 stock
Answer:	Hi, yes it has cool down mode. You can cool down the heat gun in low temperature safely by adjusting the low air flow setting.
Question:	The lead on my mig gun is approximately 10ft. can i cut this down to length to fit
Answer:	Yes, you can place the front of the heat gun upright to free your hands.

Product description

Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel. Uses 120V power. Uses a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, the material thickness, and start welding! Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.

• Millermatic 141
• 6.5-ft. (2 m) power cord with plug
• Small running gear/cylinder rack
• 10-ft. (3 m) M-100 MIG gun and cable assembly
• Argon and AR/CO2 mix flow gauge regulator with gas hose

Product description

- BRAND NEW LINER 194011 - Wire Size : 030-.035 in, (0.8-0.9 mm) - 15 ft Cable - For Miller M Series Type Welding Gun - For All Type of Welding Wire - FCAW - SS - Mig - Aluminum.

• Welding Liner Miller 194011 .030 -.035" 15 ft Miller M Series Replacement

User questions & answers

Question:	The picture doesn't look like Genuine Miller - is it? Thanks
Answer:	I would imagine it’s sourced from components all over the world. I’ve owned Everlast tig welder and I ended up buying Miller 215 because I wanted stick welding. It is very good mig and burns 7108 3/32 beautifully

Product description

Easy to use machine to increase efficiency and productivity for the light manufacturing and fabrication users. Color screen featuring Auto-Set Elite and Pulsed MIG. This all-in-one welder connects to 208 or 240 volt input power. Welds up to 1/2” aluminum, stainless and mild steel.

• Pulsed MIG welding delivers higher quality Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
• Easy-to-understand interface 7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
• Auto-Set Elite offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
• Versatility Capabilities include MIG, pulsed MIG and flux-cored welding.
• MDX-250 MIG Gun w/ AccuLock S consumables AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock S contact tips provide superior Spray and Pulsed MIG arc performance.

Product description

The Forney easy weld 140 fc-I machine uses flux core wire. Applications include do-it-yourself, maintenance and repair, metal fabrication and hobbyist. Product specifications: dimensions: 16. 75" X 8. 125" X 12" Weight: 19 lbs. Gasless/flux-core welding only portable torch wrap infinite voltage and wire feed speed control 120-volt input, 140 amp output welds 24-gauge up to 1/4" Handles . 030" Wire includes: 8' Mig Gun, 8' Ground clamp and 20A - 15A adapter duty cycle 30% @ 90A

• EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
• POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
• PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
• RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
• WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty
• PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A
• RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	This come with the welding wire
Answer:	I'm sorry it took as long as it did for me to answer you. I have no prior knowledge of this Predator generator and I had to look that up. I also would like to preface what I'm about to say with I am not a generator expert. Also I wanted to be sure that I looked up the specific amperage draws of our different welders. The formula for calculating the answer to your question is pretty straight forward. Generators measure their output in Watts in order to determine what wattage is necessary the formula is as follows... Volts X Amps = Watts. The machine you are asking about runs 7250 continuous Watts but it does not take into account what percentage of fluctuation of output amperage this machine makes, how clean is this machine? How reliable is the output amperage? I have no idea but let's plug the numbers in assuming the machine can maintain a relatively stable output. The model 155 draws max 25.4 amps on 230V in MIG mode or, 5842 watts. It draws 26.7amps on 230V in stick mode or, 6141 watts. So for this small machine it would appear yes all else being ok. Now, for example, our 200 amp MIG draws in MIG mode 35.7 amps at 230 V or, 8211 watts. It draws 41.7 amps in stick mode at 230 V or, 9591 watts. So for our larger inverters, it would appear no, that generator cannot provide sufficient output to run the welders at full potential welding power.
Question:	What type of .30 tip? Thread pitch? Size
Answer:	So only going by the pictures this appears to be a Tweco style gun similar to what the older Lincoln’s ran. Unfortunately you will have to find out what the US pro welding gun has for a back end.
Question:	Is the wire supposed to move really slow even turned all the way up
Answer:	No, not on the 155 model. 2lb
Question:	Do you know what the power output is turned all the way down
Answer:	This question really is more a generic question than it is specific to any brand welder. If you're giving it half the power it can use. Generally, you can figure you're going to get half the result. So prepared properly and possibly a little bevel, 1/8in would be about max Remember voltage is the pressure or pushing force of the amperage or heat.

Product features

Forney Easy Weld 140 FC-i Welder

The Forney 140 welder is an impressive Flux-Core capable welder. Perfect for first time welders up to avid users. Applications include do-it-yourself projects, general metal fabrication, maintenance & repair, farm & ranch and automotive work.