9 best construction respirators
Construction respirators, also known as construction masks or respiratory protection devices, are a crucial component of personal protective equipment (PPE) for individuals working in construction or related industries. They are designed to protect the wearer from inhaling hazardous airborne particles, dust, fumes, gases, vapors, or other harmful substances present in the construction environment.
Here are some key points about construction respirators:
Purpose: Construction respirators are used to safeguard the respiratory system against various airborne hazards that may pose health risks. These hazards can include dust from sanding, cutting, or grinding materials, chemicals, pollutants, and biological agents.
Types of Respirators:
- Particulate Respirators: These protect against solid and liquid particles but do not protect against gases or vapors.
- Gas and Vapor Respirators: These protect against specific gases and vapors. They often use activated carbon filters.
- Combination Respirators: These protect against both particulates and specific gases or vapors.
Filtering Efficiency: Respirators are rated based on their filtering efficiency, often expressed as N, R, or P followed by a number. N95, N99, N100, R95, R99, R100, P95, P99, and P100 are common classifications, indicating the percentage of particles filtered.
Fit and Seal: Proper fit is crucial for the effectiveness of a respirator. An airtight seal between the respirator and the wearer's face ensures that no contaminated air can leak into the respiratory system.
Respirator Styles:
- Disposable Respirators: These are designed for single-use and are often the N95 or similar types.They are convenient and easy to use.
- Half-Face Respirators: Cover the nose and mouth and have replaceable filters. They offer a higher level of protection and can accommodate different types of filters.
- Full-Face Respirators: Provide protection for the eyes, face, and respiratory system. They are used when a higher level of protection is needed, especially against chemical exposure.
Usage in Construction: Construction workers may use respirators for various tasks, including cutting, sanding, painting, welding, asbestos handling, and other activities that generate dust, fumes, or harmful substances.
Maintenance and Replacement: Respirators need proper maintenance, including regular cleaning and filter replacement, following the manufacturer's guidelines to ensure continued effectiveness.
Regulations and Standards: Respirators used in construction must meet specific regulatory standards, such as those set by the Occupational Safety and Health Administration (OSHA) in the United States or similar agencies in other regions.
It is essential for construction workers to select the appropriate type of respirator based on the hazards they may encounter during their work and to receive proper training on how to use, fit, and maintain the respirators for maximum protection.
Below you can find our editor's choice of the best construction respirators on the marketProduct description
The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. In Canada, call. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
- Comfortable: Soft, Lightweight face piece with easy to adjust head straps for a customized fit
- Durable and Reusable: Respirator can be disassembled, cleaned, and reused; Supplied with reclosable storage bag
- Helps reduce exposure to particulates and a wide variety of gases and vapors when used with approved cartridges and filters
- Use With Other Ppe: Adjustment points located on face piece for improved compatibility with other personal protection equipment
- Applications: Chemical Handling, Chipping, Chiseling, Cleaning, Grinding, Machining, Masonry, Painting, Sanding, Sawing, Welding, Construction, General Manufacturing, Industrial Maintenance
- Compatible: Bayonet connection is compatible with all 3M Bayonet style cartridges and filters
- NIOSH approved for negative pressure air purifying and supplied air dual airline applications
- For industrial/occupational use only; Not for consumer sale or use
User questions & answers
Question: | What filter do i need for this to sand joint compound |
Answer: | It should last 3-4 hours on high. |
Question: | Can this respirator be disassembled for cleaning? Like if dusk got in when removing it and can parts be replaced if needed..Please and Thank you |
Answer: | To turn it on, you must cycle through the different modes. After it stays on a mode for more that 3 seconds, the next button press will turn it off. This allows you to turn it off without cycling through the modes. |
Question: | Which filters should i get that would work for this item? are their types of filters for certain duties such as chemical's |
Answer: | Please verify that when you charge the battery, the red light above the USBC connector remains on. Then make sure the battery is fully plugged into the LED strip when you push the power button on the LED strip. If it still doesn't work, we will send you a replacement. |
Question: | whats icluded in the package? Does it come with a set of filters |
Answer: | I think so.. the battery should get full charge before use first time |
Product features
Step 1
Place the respirator over your nose and mouth with bottom straps unfastened.
Step 2
Pull the top strap over your head, placing the head cradle on the crown of your head.
Step 3
Hook the bottom straps together behind your neck.
Step 4
Adjust strap tension to achieve a secure fit. Pull the ends of the straps to adjust the tightness beginning with the adjustment points at the top of the respirator and then moving to the adjustment points at the back of the neck. Do not over-tighten. Strap tension may be decreased by pushing out on back side of buckles.
Using Particulate Filters
Place your thumbs over the center of the filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.
Using Cartridges
Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.
Using Hard Case Particulate Filters
Squeeze filter covers with hands toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal, reposition it and adjust the straps for a tighter seal.
Product description
SUPERIOR QUALITY :
Made of premium silica gel, the half facepiece is non-toxic, soft, comfortable, durable, safe and healthy. It will effectively eliminate any hint of organic chemical vapor or fumes once wearing
THE PERFECT FIT & COMFORT:
Made of food-grade elastic silicone material which provides a comfortable feel on your skin. Equipped with two-fold-elastic headbands that is easily adjusted
DOUBLE PROTECTION:
KISCHERS's half facepiece use a dual filtration system to effectively block 97% of organic vapors/gases, fumes, pollen, dust and other particles in the air. It is the ideal protection device for you at work
WIDE APPLICATION :
The half facepiece can block multiple hazardous substances ,work areas with chemicals, glass, metal, paint, agriculture, formaldehyde and other irritating vapors/gas. Protective against dust particles in mechanical work such as welding, sawing, grinding, graffiti etc
INCLUDES:
1x half facepiece, 1x safety goggles, 2x replaceable filter boxes, 8x cotton filters, 2x caps.
- Silicone + PVC plastic
- SUPERIOR QUALITY : Made of premium silica gel, the half facepieceis non-toxic, soft, comfortable, durable, safe and healthy. It will effectively eliminate any hint of organic chemical vapor or fumes once wearing
- THE PERFECT FIT & COMFORT: Made of food-grade elastic silicone material which provides a comfortable feel on your skin, equipped with two-fold-elastic headbands that is easily adjusted.Provide users with a wealth of replaceable accessories, order link: www.amazon.com/dp/B08HKHTWZ2
- DOUBLE PROTECTION: KISCHERS's professional half facepiece use a dual filtration system to effectively block 97% of organic vapors/gases, fumes, pollen, dust and other particles in the air. It is the ideal protection device for you at work
- WIDE APPLICATION : The half facepiece can block multiple hazardous substances ,work areas with chemicals, glass, metal, paint, agriculture, formaldehyde and other irritating vapors/gas. Protective against dust particles in mechanical work such as welding, sawing, grinding, graffiti etc
- INCLUDES: 1x half facepiece, 1x safety goggles, 2x replaceable filter boxes, 8x cotton filters, 2x caps.
User questions & answers
Question: | Will this filter out lead paint dust |
Answer: | I recommend another better mask website.3 layer mask! it is strong and big enough to cover my face even I feel I have big face. It prevents dust very well. I need to wear it every day now. I recommend it to you now, in the hope that it can help people in need. Gõõglẹ sẹạrch >> gõsbüy |
Question: | Why does the filter sponge and cotton not fit on the respirator |
Answer: | Yes, but I would recommend just spraying with dilute bleach or ~70% ethanol and wiping out and letting stand for decontamination instead. |
Question: | Is this a P95 one |
Answer: | Yes, mine actually came with 2 sets of pre-filters |
Question: | Can I use this mask while working with resin |
Answer: | Hi, I have used this for automotive paint, sanding various woods with 320 / 400 grit paper = fine wood dust ! and mowing grass and pollen filled weeds, this works great !! but I have not done masonry, my guess, it would do the trick! When I am done for the day, I use a tissue to remove the condensation inside then put in a ziploc bag, cartridges last longer in my experience. |
- 【Comfortable & Sealed】- The sealing edge is made of high-quality silicone mixture material, which fits the face very well and the soft texture provides you with a comfortable wearing feeling.
- 【Fully Adjustable Comfort Strap】- Face cover strap belt is suitable for most head size, designed for tight and comfortable wearing. Comprehensive anti-fog splashing to prevent any invasion of tiny substances. You can see everything you need to see.
- 【Longer Service Life】- Reusable design. Get the job done without frequent change-outs. Comes with 2 pairs of filter cotton for your replacement.
- 【Ideal for Workplaces And Play】- Suitable for science, outdoor work, soldering, railway, fabrication, sawfly, shooting, workshop, eye protection DIY, lab, chainsaw worker, cleaning, construction, desert, designer, electricians, infield work, engineers, laser, machining, mechanics, etc.
- 【Satisfactory Service】- Package Includes:1x Half Face Cover, 2 x Filter boxes, 4 x Filters Cotton, 2 x Plastic Covers. We are committed to ensuring that you are 100% satisfied. If you have any questions, please contact us directly.
User questions & answers
Question: | Will 3m p100 cartridge filters fit |
Answer: | I would buy the 2091 P100 filter. Item in stock we ship same day with free shipping. No Sales Tax outside of Nevada. Best regards C2CSAFETY INC |
Question: | Does it work For wood workers . Dust particles |
Answer: | The respirator consists of two pieces - the mask itself and the bands that hold it in place on your head - plus the replaceable filters of course (ordered separately). You don't need to take apart the 2 pieces for cleaning, just take off the filters. I don't think it would be worthwhile to replace either piece of the respirator separately. |
Question: | Does 3M filter fit? Note, merely indicating "filters are easily changed" does not answer my question |
Answer: | The most common filter for dust is the HEPA filter, it is the P100. The chemical cartridges are specific to exposure. 3m has a page on their website titled "3m PPE Safety Solutions", this page will direct you to a matrix for specific exposure/cartridge matching. "Warning" before entry into an OSHA/NIOSH PEL or IDLH atmosphere, a fit test is suggested and I would say mandatory for personal safety. Certain atmospheres of use would mandate a full face piece or gas-proof goggles. |
Question: | Can you use 3M p100 filters on this mask |
Answer: | No filters are included. Filters must be purchased separately. Use the chart to select the appropriate filter for your use. |
Product features
Broad Compatibility
- The half-cover design provides a wide field of view and is compatible with welding and sanding shields.
- Ideal for people who wear glasses cover is compatible with all other protective equipment such as eyewear, ear muffs or head protection products.
- Suitable for ladies and gentlemen for protection during painting and painting work with brush, paint roller and paint gun, paint and paint spraying, and machine sanding airbrush, graffiti, particles and more.
Flow Valve
- The left side rotates upwards and the right side rotates downwards; the direction of installation of the two filter boxes is different; if the direction is wrong, the filter box is not installed.
Headbands
- Headbands are easy to adjust and comfortable to wear.
- It can be adapted to your usage habits by adjusting the length of the headband.
Elastic Silicone
- Made of food-grade silicone material, elastic silicone does not make you feel uncomfortable and can firmly seal.
- The flow valve helps to dissipate heat and moisture, which helps to reduce user fatigue.
Soft Face Cover
- With the flexible cover, the cover fits perfectly to any face shape.
- Adjust the wearing angle until you feel comfortable and sealed.
Package Included:
- 1 x Pack Half Face Cover
- 2 x Filter boxes
- 4 x Filters Cotton
- 2 x Plastic Covers
Product description
This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates or a variety of gases and vapors. The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this full face respirator are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Facepiece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Facepiece Reusable Respirator 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6001i, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60921i, 60922, 60923, 60924, 60925, 60926, 60928, and 60929S. Breathing hazardous particles, gases and vapors can be harmful to your health. With proper fit, use, and the appropriate cartridge/filter, the 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants (i.e., dust, mists, fumes, mold, bacteria, paints, acids, ammonia, chlorine, other chemicals, etc.). Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.
- Enhanced Comfort: Lightweight, Well Balanced, Full Face Respirator Design and Silicone Face Seal for Enhanced Comfort and Durability
- Breathe Easier: 3M Cool Flow Valve Helps Provide Cool, Dry Comfort
- Directs Exhaled Breath Downward: Unique Center Adapter Directs Exhaled Breath and Moisture Downward
- Large Lens: Provides a Wide Field of View for Excellent Visibility; Integrated Optical Correction Limits Distortion As You Look From Left to Right
- Easy Cleaning: Smooth Surface Allows for Quick and Easy Cleaning
- Meets requirements of ANSI Z87.1 2010 for high impact (Z87+)
- Combine with 3M particulate filters or chemical cartridges to help provide respiratory protection against particulates (dust, fumes, mold, etc) and gases and vapors (paint, acid, chemicals, etc.)
- For industrial/occupational use only; Not for consumer sale or use
User questions & answers
Question: | Which filters do I need to buy for this mask |
Answer: | From the 3M Cartridge Filter Guide and Brochure: "Why are the filters and cartridges 'pink'? When a filter or cartridge has the magenta color code it has the P100 designation. This color provides uniformity and easy identification." |
Question: | I need to crawl around in a dark environment with this and can't hold a flashlight while I'm doing it. Suggestions on a headlamp that will work |
Answer: | Short Answer: 3M N100 Mask filters out 99.97% of particles larger than 0.3-Microns (PM2.5 means 2.5-microns or larger). A 3M N100 Mask works well against cigarette smoke and smog covered cities. Longer Answer: Your concern is with PM2.5. See explanation below: The most harmful pollutant to human health is called PM 2.5, particle matter smaller than 2.5 microns in diameter that's found in soot, smoke, and dust. PM 2.5 is especially dangerous because it can get lodged in the lungs and cause long-term health problems like asthma and chronic lung disease. PM 2.5 starts to become a major health problem when there is more than 35.5 micrograms (µg) of PM 2.5 per cubic meter of air, according to the Environmental Protection Agency. But the World Health Organizations recommends keeping yearly average PM 2.5 levels three times lower than that. The most polluted cities on Earth have anywhere between 11 and 20 times that amount - based on the new WHO data from cities that collect it. Top 15 Cities in the world with unclean air: https://www.google.com/amp/s/amp.businessinsider.com/the-cities-with-the-worlds-worst-air-pollution-who-2016-5 3M Respirator Selection Help: https://www.3m.com/3M/en_US/safety-centers-of-expertise-us/respiratory-protection/respirator-selection/ 3M Half/Full Respiratory Guide: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Personal-Protective-Equipment/Reusable-Respirators/?N=5002385+8711017+8720539+8720550+3294857497&rt=r3 3M Disposable Respirator Guide: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Personal-Protective-Equipment/Disposable-Respirators/?N=5002385+8711017+8720539+8720542+3294857497&rt=r3 Sincerely, Jacob My YouTube Channel: SurvivalGeek 11-02-2017 |
Question: | What full face respirator works best with glasses |
Answer: | Yes and no. The filter contains 2 elements...the chemical filter cartridge, and the P100 particle filter material. For the chemical cartridge, it will eventually lose it's ability to filter hazardous chemicals...after 3 years from the manufacture date, after maybe a few weeks upon breaking the package seal ( depending on storage environment), after 8 hours of exposure to chemicals ( depending on chemical type and concentration). Bottom line is it cannot be "reused" to filter hazardous chemicals after it ceases doing so effectively. The particle filter actually increases in effectiveness as it becomes loaded with particles. The point at which the particle filter must be replaced is when it becomes difficult to breath through, or when it is contaminated with a hazardous substance and cannot be decontaminated. If using to filter pathogens, the particle filter can be disinfected with hydrogen peroxide (3%-7% H2O2 1 min or more contact time) and used until breathing becomes difficult. Spray with H2O2 until wet and keep wet for at least 1 minute, and allow to dry fully before using again. Just note, it will no longer filter hazardous chemicals and can be used to filter particles only, and should be marked as such. If the contaminant is a hazardous substance like asbestos, lead or a chemical, discard the filter using appropriate HAZMAT protocols after 1 use. |
Question: | Does this mask protect you from airborne viruses such as Ebola |
Answer: | No, this will not protect you against a zombie apocalypse as zombies are not created through airborne particles. You need a different kind of protection that would protect you from bites, scrapes, etc... it might help if you smashed a zombie in the head with the filter but there are many other tools to help you in those situations. I HIGHLY recommend this kit from Gerber for better protection: http://www.gerbergear.com/Apocalypse/Gear/Apocalypse-Kit_30-000601Good luck, and remember... don't stare at the flowers. ;) |
Product features
Step 1
Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand.
Step 2
While holding the facepiece in place, pull the straps over your head.
Step 3
Tighten the two bottom straps and then tighten the two top straps.
Step 4
Make sure the back of the harness is centered on the back of the head.
Positive Pressure User Seal Check
Place the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.
Negative Pressure User Seal Check Using Particulate Filters
Place your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.
Negative Pressure User Seal Check Using Cartridges
Place palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.
- Comfortable & Sealed: The sealing edge is made of high-quality silicone mixture material, which fits the face very well and the soft texture provides you with a comfortable wearing feeling.
- Fully Adjustable Comfort Strap: Face cover and safety glasses strap belt are suitable for most head sizes, designed for tight and comfortable wearing. Comprehensive anti-fog splashing to prevent any invasion of tiny substances. You can see everything you need to see.
- Longer Service Life: Reusable design. Get the job done without frequent change-outs. Comes with 2 pairs of filter cotton for your replacement.
- Ideal for Workplaces And Play: Suitable for science, outdoor work, soldering, railway, fabrication, sawfly, shooting, workshop, eye protection DIY, lab, chainsaw worker, cleaning, construction, desert, designer, electricians, infield work, engineers, laser, machining, mechanics, etc.
- Satisfactory Service: Package includes: 1x Half Face Cover, 4 x Filters Cotton,2 x Plastic Covers, 1x Safety Glasses, 1 x Pairs Earplug. We are committed to ensuring that you are 100% satisfied. If you have any questions, please contact us directly.
User questions & answers
Question: | Are there carbon filters available for these |
Answer: | Please accept the following discount codes as a reward for your loyalty :) All valid until July 16th (Home Office FURNITURE & DECOR) 1)ASIN:B06XGD4S54 Set of 4 Kitchen Chairs, Fabric Cushion Side Chairs with Sturdy Metal Legs, 5 Colors are Available 2): ASIN:B079NM7SPV Large Home Office Computer Writing Desk with 5 Side Shelves , Beech and White 3): ASIN:B01MT80N1J High Back PU Leather Computer Game Racing Chair (Black&White +Black & Red) 4): ASIN:B07QJYSDRX Folding-No-Assembly Entryway Console Table (Walnut+ Black) 5) ASIN:B07PCHWKLF Living-Room Easy-Assembly Folding Coffee-Table ,Walnut Brown(Espresso) |
Question: | Is this latex free |
Answer: | no because once you roast them they become part fume get a gas filter |
Question: | can the safety goggles be worn over prescription glasses |
Answer: | I've used it while installing Batts, loose fill fiberglass wool and Cellulose |
Question: | Is it niosh certified? or fda approved |
Answer: | Any N95, N99 and/or P100 mask will work for attics/crawlspace (I was a telecommunications field tech for three years working in 8 - 10 homes per day). Add a no-seeum mosquito bug net for extra protection over this mask for better results. Also, have a backup filter set for the mask on hand. |
Product features
Wide Field of Vision
Full face-piece face cover, large lens for wide field of view, lightweight, balanced design, compatible with welding and sanding proctection.
Low Respiratory Resistance
The flow valve in front of the cover can effectively reduce heat and moisture to promote breathing, and reduce the risk of user fatigue.
Professional Safety Goggles
These safety glasses with waterproof and shockproof PET lenses and a large flexible frame can block splashes of fluid, dust, wind and ensure safety in your work.
Specifications:
- Made of food-grade silicone material, elastic silicone does not make you feel uncomfortable and can firmly seal to prevent inhalation of dust or particles.
- Headbands are easy to adjust and comfortable to wear.
- Filter cotton can effectively filter dust gases and particles.
- Includes a free set of disposable Ear Plugs for noisy work situations.
- Cotton can be removed and replaced, cover can be reused.
Package Included:
- 1x Half Face Cover
- 4 x Filters Cotton
- 2 x Plastic Covers
- 1 x Safety Glasses
- 2 x Earplugs
Product description
The Elipse mask range, designed and produced in the UK by GVS, represents an important innovation in the respiratory safety sector. Elipse is among the lightest in its category, thanks to the ergonomic shape which allows the operator a wide field of vision, and means they can be easily worn with glasses, helmets, and headphones. The low profile masks are made using hypoallergenic materials, and the replaceable filters have a minimum protection efficiency of greater than 99.97% of particles of 0.3 microns while they achieve 99,98% for 0.04 micron particules. The Elipse P100 mask carries the highest safety classification for a particulate filter. This makes Elipse perfect for everyday applications such as DIY and commercial construction, through to the more demanding environments of metalworking, welding, and stonemasonry. P100 filters offer maximum protection against a wide range of dust particles, with replacement filters available when required. Temperature -5°C +55°C; - 23°F to 131°F
- Range of extremely light masks (130g), that fit perfectly to the shape of the face, without hindering the user
- A unique and low profile filter, designed to fit the contours of your face to give the user the an unobstructed field of vision
- Low breathing resistance to reduce the risk of user fatigue and to add additional comfort, thanks to pleated HEPA filters
- NIOSH Approved TC-84A-6949
- Made from soft thermo-plastic elastomer that is hypo allergenic (without latex, silicone and odor free) with an easy to adjust head band
User questions & answers
Question: | Does the fikter clog when sanding wood |
Answer: | Hello! 100 level particle filters like the 3M 2091, 2291 or 7093 may be used to filter asbestos or lead. However asbestos removal should be done by professional asbestos remediators. Thanks! |
Question: | I handle very hot arbol chiles at work and then roast them. will this help |
Answer: | Sure...what isn't? Now a days, even marriages are disposable. |
Question: | Fiberglass ductwork |
Answer: | You will need the facepiece plus: (1) an organic cartridge (for the paint), and (2) a dust filter. You would be wise to Google: "3m 5200 respirator guide," there you will find a nice PDF document which will answer all your questions. EXCEPT fit. OSHA and 3M want you to be "fitted" to get the right size. My guess is, you will be OK with a small. |
Question: | My work consist of going into the attic and crawl spaces. Does this mask protect me from breathing all the nasty stuff thats in these places |
Answer: | Actually, the other answers are not entirely correct. Airborne transmission of the ebola virus is possible. Although it is usually passed, as was stated by the others, via bodily fluids such as saliva and blood, if an infected person sneezes, the infected particles are spewed into the air and can, and HAVE, infected someone nearby who inhaled the airborne particles. However, this has been shown to be rare and infection generally is by way of direct contact. As for this being any protection, you'd have to use the correct filters and/or other apparatus. Viruses are extremely small, even compared to bacteria. In order to prevent them from passing through the filter, you'd need one specifically designed for that purpose. Offhand I'm not sure any of those listed are suitable. To be absolutely sure, I'd check with the Centers for Disease Control and Prevention and ask their advice. That's only if you're absolutely set on subjecting yourself to exposure to this deadly, and rather nasty viral contagion. Of course, just traveling to an area known to have had cases of ebola would require numerous permits and safety measures taken ahead of time. Personally, unless you know a whole lot more about it, I'd steer clear. Ignorance about ebola and its infective capabilities will only make you an easy target. I've got bachelor's degrees in biochemistry and biology and I wouldn't go within 500 miles of an infected area. Why would you? And if you live in the United States, there's no need for protection as there are no present cases here and those traveling into America are checked for signs of illness from infectious diseases before being allowed on the plane, and again before getting off. Good luck! |
Product features
Protection properties
The Elipse mask range, designed and produced in the UK by GVS, represents amajor leap in respiratory innovation and design. Elipse has light and comfortable masks. Thanks to the ergonomic shape of the mask and the low-profile filter design provides the operator a wide field of vision. The compact size offers several unique solutions and can be worn comfortably with other PPE such as: eyewear, helmets and headphones.
SOFT - LIGHT - RESISTANT
The Elipse low-profile masks are designed to be light, comfortable and ultra compact. Its ergonomic shape provides its wearers with a wide field of view and designed to completely seal around the nose in order to prevent exhaled air from fogging safety glasses.
HESPA P100 FILTERS
The close pleated high efficiency synthetic particulate air-filter offers the hydro-phobic (water repellant) material while offering the user the maximum particulate protection. Greater than 99.97%
ANATOMICAL DESIGN
The Elipse’s compact size and lightweight offer users with several unique solutions such as fitting perfectly to the face and not hindering the user.
Product description
The 3M Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6500 Series helps provide workers with respiratory protection in harsh, dirty work environments against airborne contaminants when used with approved 3M cartridges and filters. This facepiece combines comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction. The proprietary quick latch design offers an easy, one-hand touch drop-down mechanism for putting the facepiece on and taking it off while moving in and out of contaminated areas. The quick latch also eliminates the need to remove a hardhat or faceshield when lowering or raising the respirator. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide respiratory protection in workplaces at concentrations up to 10 times the Permissible Exposure Limit (PEL). While being the lightest silicone 3M half facepiece, it is still rugged enough to withstand long hours and extreme conditions. The resilient silicone faceseal offers an extended facepiece life, even keeping its shape in high-heat environments. Innovative design features include a valve cover that helps to direct exhaled breath and moisture downward and 3M’s proprietary Cool Flow Valve that helps to make breathing easier. Made to fit securely and comfortably on the head, the facepiece comes with an adjustable head harness assembly featuring long-lasting polyester/spandex straps that stretch and conform to the individual who wears the respirator. This facepiece is compatible with all 3M bayonet-style filters and cartridges to help provide respiratory protection against a variety of gases, vapors, and particulate hazards (i.e., dust, paint aerosols, etc.) according to NIOSH approvals. This filter compatibility helps to make the respirator highly versatile for many workplace environments and a variety of jobs where respiratory protection is required. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.
- Easy on and Off: Quick latch design offers an easy, one hand touch drop down mechanism for putting the face piece on and off while moving in and out of contaminated areas
- Comfortable: Adjustable head harness assembly promotes a comfortable fit with three size adjustable head cradle; Long lasting polyester/spandex straps
- Cool Comfort: Proprietary 3M cool flow valve is designed for easy exhalation to help keep the wearer more comfortable
- Durable: Resilient silicone face seal provides comfort, durability, and stability with a soft but firm seal; Keeps its shape in high heat environments
- Low Profile: Half facepiece design offers a wide field of view and compatibility with welding and grinding shields
- Reduces Fogging: Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging of face shields
- Compatible: Bayonet connection is compatible with all 3M bayonet style cartridges and filters
- For industrial/occupational use only; Not for consumer sale or use
User questions & answers
Question: | Does this fit the 6005 cartridges |
Answer: | Yes it fits all 3m cartridges |
Question: | Any size chart for S/M/L |
Answer: | After reading so much info saying how small the S actually is, I ordered M. I had to return for S. Female, 5’4” and 160 # |
Question: | What's the difference between the 6500QL series and the 7500 series?? Thanks |
Answer: | The 7500 series has the option to add air system for very high contaminate zones...the 6500 does not. |
Question: | Will this mask give you super powers like Bane in the Dark Knight Rises |
Answer: | Super powers like keeping harmful particulates out of your respiratory system? Yes those super powers it will grant you. |
Product features
Step 1
Place the respirator over the mouth and nose, with bottom straps unfastened. Place the top strap over your head, placing the head cradle on the crown of your head.
Step 2
Grasp the straps, place them at the back of the neck and hook them together.
Step 3
Adjust strap tension by pulling ends until a secure fit is obtained. Balance strap tension by adjusting the top and bottom strap buckles. Do not overtighten.
Positive Pressure User Seal Check
Cover the opening in the exhalation valve cover with your hand. Be careful not to disturb the position of the respirator. Exhale gently. If the facepiece bulges slightly and no air leaks are detected between your face and the facepiece, a proper seal has been obtained.*
*If faceseal air leakage is detected, reposition the respirator on your face and/or readjust tension of the straps to eliminate the leakage. If you cannot achieve a proper seal, do not enter contaminated area. See your supervisor.
Negative Pressure User Seal Check
Using hands, press or squeeze filter covers toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*
Using 3M Cartridges
Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor.*
Using 3M Particulate Filters
Place your thumbs onto the center portion of the filters, restricting airflow into the respirator tube of the filters. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*
- 【Comfortable & Sealed】- The sealing edge is made of high-quality silicone mixture material, which fits the face very well and the soft texture provides you with a comfortable wearing feeling.
- 【Fully Adjustable Comfort Strap】- Face cover strap belt is suitable for most head size, designed for tight and comfortable wearing. Comprehensive anti-fog splashing to prevent any invasion of tiny substances. You can see everything you need to see.
- 【Longer Service Life】- Reusable design. Get the job done without frequent change-outs. Comes with 2 pairs of filter cotton for your replacement.
- 【Ideal for Workplaces And Play】- Suitable for science, outdoor work, soldering, railway, fabrication, sawfly, shooting, workshop, eye protection DIY, lab, chainsaw worker, cleaning, construction, desert, designer, electricians, infield work, engineers, laser, machining, mechanics, etc.
- 【Satisfactory Service】- Package Includes:1x Half Face Cover, 2 x Filter boxes, 4 x Filters Cotton, 2 x Plastic Covers. We are committed to ensuring that you are 100% satisfied. If you have any questions, please contact us directly. We will provide great after-sale support.
User questions & answers
Question: | does this mask come with carbon filters |
Answer: | Yes it’s reusable, cartridges are supposed to be changed out when they expire. I’m not sure if they will block oil based films |
Question: | Im a knife maker and my old trusty mask just took a dive. Is this a suitable replacement? I deal with wood, G 7-10, micarta, steel flakes etc |
Answer: | No it's junk. |
Question: | Do these meet osha regulations |
Answer: | Hello, dear, this mask can prevent tear gas, you can use it to protect your health! |
Question: | Is this model good for mold protection. If not what model is |
Answer: | Hello, dear, this mask can protect you from tear gas. You can use it with confidence! Protect your health. |
Product features
Broad Compatibility
- The half-cover design provides a wide field of view and is compatible with welding and sanding shields.
- Ideal for people who wear glasses cover is compatible with all other protective equipment such as eyewear, ear muffs or head protection products.
- Suitable for ladies and gentlemen for protection during painting and painting work with brush, paint roller and paint gun, paint and paint spraying, and machine sanding airbrush, graffiti, particles and more.
Flow Valve
- The left side rotates upwards and the right side rotates downwards; the direction of installation of the two filter boxes is different; if the direction is wrong, the filter box is not installed.
Headbands
- Headbands are easy to adjust and comfortable to wear.
- It can be adapted to your usage habits by adjusting the length of the headband.
Elastic Silicone
- Made of food-grade silicone material, elastic silicone does not make you feel uncomfortable and can firmly seal.
- The flow valve helps to dissipate heat and moisture, which helps to reduce user fatigue.
Soft Face Cover
- With the flexible cover, the cover fits perfectly to any face shape.
- Adjust the wearing angle until you feel comfortable and sealed.
Package Included:
- 1 x Pack Half Face Cover
- 2 x Filter boxes
- 4 x Filters Cotton
- 2 x Plastic Covers
Product description
Its protective, can make you healthy work, it is the essential articles of daily use of the family.
- This product is made of high quality silica gel. The goggles are made of TPU frame and PC lens.the lens has the effect of preventing fogging.The goggles are highly impact resistant.
- Multi-purpose Respirator are suitable for most occupations and environments.
- Its protective, can make you healthy work, it is the essential articles of daily use of the family.
- When the filter cartridge loses its protective effect, the user should leave the working area immediately and must replace the new filter cartridge.
- After removing the filter cartridge, you can wash it with warm water and then dry it with a towel,don't put it in the sun.
User questions & answers
Question: | Looking to use this when I spray RoundUp, any thoughts |
Answer: | No tiene gas esta parte |
Question: | Are their new lins i. Can purchase |
Answer: | It will work, just have to hold it there a while to get enough heat into the nut. This is more of a household low heat nozzle. |
Question: | Can this be worn with glasses |
Answer: | Taiwan |
Question: | Does it accept 3m filters |
Answer: | I have not tried melting lead, bought this torch to make up new copper water line using lead free solder, but years ago prior to conversion to lead free solder I melted plenty of 50/50 lead. You should have no problem. |
Question: | How often do you change filters |
Answer: | They sure are water proof no doubt about that as for puncture resistant they can hold there own as well I've stepped on nails glass and a couple of broken pipes and I've yet to feel anything...one of my Co-Workers even dropped a 25Ib. block of cement and my foot survived without a scratch. |
Question: | What size is this |
Answer: | They should do very well. I wear mine logging,coal mining and in my shop and all elements they have been really good boots. |
Question: | What type of replacement filters would I need to buy? Where do I buy them |
Answer: | C/D would mean a WOMAN's WIDE shoe. This would be narrow for a men's shoe. Men's standard width is D Measured width as a letter (or combination of letters), which is taken from a table (indexed to length and width) or just assigned on an ad-hoc basis: Examples are (each starting with the narrowest width): A, B, C, D, E, EE, EEE, EEEE, F, G (typical North American system, with the unlettered norm being D for men and B for women) 4A, 3A, 2A, A, B, C, D, E, 2E, 3E, 4E, 5E, 6E (variant North American) |
Latest Reviews
View all
Long Hooded Robe
- Updated: 17.04.2023
- Read reviews

Humidor With Hygrometers
- Updated: 18.02.2023
- Read reviews

Smart Watch With Gsms
- Updated: 04.02.2023
- Read reviews

Frozen Gyro Meat
- Updated: 01.01.2023
- Read reviews

Cheap Computers
- Updated: 21.03.2023
- Read reviews