17 best welding helmet with grinding features

Product description

Wilmar Corporation was founded in 1971. Based in Renton Washington, Wilmar supplies major retailers as well as distributors throughout North America. By providing quality tools, great service, and innovative packaging and product support, Wilmar has become one of the leading distributors of professional tools in North America. Trading under the brand names of AirTIGHTTM, Performance ToolTM, Performance TechTM, MechanicsTM, Project ProTM and Northwest TrailTM, Wilmar focuses on providing a superior level of service and quality products that meet our customers expectations of product that carries our - of Satisfaction.

• FOLDING DESIGN: Offers compact storage and easy mobility to take from work site to work site
• PRINTED TABLETOP: Printed with grid, ruler, and protractor for added convenience as you work
• ONE-HANDED CLAMP SYSTEM: Allows for independent jaw adjustment
• VERSATILE CLAMP: Jaws resist warping and can be angled to accommodate uniquely shaped materials
• 200 lb safe working load
• Folding design for compact storage
• Tabletop printed with grid, ruler and protractor for added convenience

User questions & answers

Question:	how much does this weigh
Answer:	Not much. I can't remember it's exact weight (threw out the box), but anyone with any reasonable amount of strength can fold it flat and carry it away. It is not a heavy duty piece of workshop furniture at all. It's hey flimsy.
Question:	I would like to know how far apart the two top boards will go. Does anyone have that measurement for me
Answer:	the span between the two black boards in the picture is 4-3/8". But with the spacers that fit into pegholes on top of the boards (shown in yellow), the maximum span is just under 10".
Question:	How do you open it
Answer:	I assume you mean how do I set one up? The answer is the legs are tucked in underneath the top of the horse. They fold and pivot, fitting nicely underneath. Easy to store, transport and use. They are relatively heavy, so very stable (why I chose these over others). To setup, turn the horse over, unfold the legs until they are secured behind their stop.
Question:	I would like to work on my AR-15 and I need a vise. Can I mount a vise on it
Answer:	Depends on the size of the vise. The table top is made of two jaws that open and close. If your vise is large, it will extend over the second jaw and opening and closing will be hard or impossible. I have a smaller vise mounted on mine and it works very well. The table top jaws work well as a soft vise too.

Product features

Performance Tool Portable Multipurpose Workbench and Vise

• Folding design for compact storage.
• Includes 4 bench dogs for odd shaped pieces.
• Tabletop printed with grid, ruler and protractor for added convenience.
• Includes tool storage rail.
• 200 lb. safe working load.
• Overall size: 23 7/8" x 25" x 31"

Product description

Heavy duty cast iron construction. Dual lock downs for easy positioning. Replaceable hardened steel jaws. Diamond serrated for a secure grip.

From the Manufacturer

Wilmar Performance Tool is an importer with nearly forty years of experience supplying high quality products with great value. You can be confident that the Wilmar Performance Tool products you purchase will perform to the highest standards. The MV10 is a heavy duty bench vice with five inch jaws which open to 4-1/2-inch. The vice has a unique head that rotates 360 Degree so it is very versatile. The vice includes a built in anvil with precision machined surface for the flat shaping of metals. Dual lock downs and 180 Degree swivel base allows easy positioning. Diamond serrated hardened steel jaws for a secure grip. Heavy duty cast iron construction.

• Diamond serrated jaws for secure grip and dual lock downs for easy positioning
• Multi-jaw bench vise with swivel base and head to provide clamping action for heavy-duty applications
• 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place
• Heavy duty cast iron construction creates a body that is durable and strong for extended life and has a flat portion that acts as an anvil and additional work surface
• Vise head rotates 360 degrees with locking positions to provide access to the three jaw sets and adjust them for proper placemen

User questions & answers

Question:	Will this vise fit a porter cable floor drill press
Answer:	The other answers are incorrect, all of Wilma's products are imported, usually from China. Their main office is in Seattle, but no manufacturing.
Question:	Is this vise steel jawed so I can add the soft pads to them. I guess the magnetic pads won't work if they aren't steel
Answer:	The two side mounting slots are about 2 inches long with about 1/4 inch distance between the two slots. The slots are about 1/2 wide. The base is 5 inches long and 5 inches wide.
Question:	What is the country of origin
Answer:	The are just as nice and way less expensive!
Question:	Distance between mounting slots
Answer:	These pillows are spot clean only.

Product description

Ideal for ship and hobby use. Drills metal, plastic and wood. Fully adjustable machined table tilts 45 degrees left and right. Cast iron construction. 1/2" spring loaded chuck with protective guard and 2-1/2" vise. CSA Approved.

From the Manufacturer

Ideal for shop and hobby use. Drills metal, plastic and wood 1/2-Inch Spring loaded chuck with protective guard and 2-1/2-Inch Vise Fully adjustable machined table tilts 45 Degree left and right Cast iron construction CSA Approved.

• Ideal for shop and hobby use
• Drills metal, plastic and wood
• 1/2-Inch Spring loaded chuck with protective guard and 2-1/2-Inch Vise
• Fully adjustable machined table tilts 45 Degree left and right
• Cast iron construction CSA Approved

Product description

Antra AH6-660 Series welding helmet is featured with the smart chip controlled 4 sensor auto darkening lens, which is extremely fast responsive to electric arc from TIG, MIG, MMA or Plasma applications. Larger 3.86X2.50" window provides a much better viewing area. This light weight welding helmet is so versatile that it can be used on grinding, cutting and welding applications. It is a perfect upgrade for goggles and fixed shade glass, or smaller size auto helmet for a reasonable cost.

*Features:

- Fully automatic power ON/OFF.

- Knob to adjust sensitivity and delay setting

- UV/IR Protection: Permanent Shade DIN16

- Hard hat adapter (Sold separately)

- Battery indicator and testing

- Power off delay 10 minutes, the filter keeps alive for 10 minutes in dark environment before it goes to sleep.

*Specifications:

- Viewing Area: 98 x 62mm / 3.86" x2.50"

- Cartridge Size: 110mm x 90mm x 9mm / 4.33" x 3.54" x 0.35"

- Optical Class: 1/1/1/2

- Reaction Time: 0.00004(1/25,000) Seconds

- Dark to Light: 0.1-1 Seconds

- Light State: Shade DIN 4

- Dark State: Shade DIN 5-9/9-13

- DC TIG Amperage Rating: >2 Amps

- Battery Type: Solar Cell + 2X CR1616 installed (Replaceable)

- Helmet Material: High Impact Polyamide Nylon

- Operating Temperature: -10°C- 55°C (14°F-131°F)

- Storage Temperature: -10°C- 55°C (14°F-131°F)

- Meet Standards: ANSI Z87.1 / EN379 CE / CSA Z94.3

- Weight: 475g/16.8oz

*Spare parts:

- Exterior lens covers:ASIN# B00CIOKN6C

- Inner lens covers: ASIN# B00NF7R9AO

- Head Gear: ASIN# B01M365MTP (New Version) ASIN# B00IAGN35K (Old version)

- Hard hat adaptor: ASIN# B00MW9P7LY (For APX-XXXX-9929 only, old version of head gear)

- Cheater Lens: ASIN# B017IDJKMK (Diopter various)

*Note: Head gear may require simple assembly.

• Great For Arc, Mig, Tig? Plasma Cutting Applications with Grinding Feature
• Fast response time provides better protection for welders
• Viewing Size 3.86"X2.50" with 4 redandat premium sensors
• Cheater Lens / Magnifying Lens Compatible Design
• Step-less Sensitivity and Delay setting Knob Adjustable

User questions & answers

Question:	what size cheeter lens fits the helmet
Answer:	Yes, the vise is steel jawed and magnetic.

• 【Safety & Protection】Passive Filter with Permanent shade 13 to UV/IR, combined with triple-layered auto dimming LCD shutter, providing sufficient and accurate shade range within 3/5-9/9-14 to visible lights; Meets ANSI Z87.1 Standards
• 【Comfort & Convenience】Luxury large viewing area fully automatic lens 3.86X3.23" (12.5 SQI), more comfortable to have a clear view of joints and welding puddle, getting better control on the whole welding process and beautiful beads finish; Inside shade setting with memory settings to avoid accidental changes and great to be used in tight spaces
• 【Performance】4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time and accurate auto shading, minimizing harmful radiant bypass, avoiding eye stress
• 【Reliability】Interference Suppression Technologies, minimizing false triggering: less sensitive to sun lights, workshop lights while very responsive to welding arc, even the hardest to detect DC TIG: Rating > 2 Amps; Corner spread arc sensors provides more coverage, reducing blockage in complicated welding positions
• 【Versatility】A great auto dim lens that can handle multiple processes of Plasma Cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding, which are popular in metal fabrication industry, welding schools, welding shops, auto manufacturing and repair industry, ship factories as well as DIY hobbyists projects

User questions & answers

Question:	I see it specifies 1/1/1 optical clarity, does this helmet actually have the new lens technology? It appears normal green in picture
Answer:	Hi This would be the Height THanks
Question:	Can anyone verify that this will work right with a true dc (inverter) welder? one cheap hood i have goes light when trying to tig steel
Answer:	Hi, This is the outside dimensions THanks
Question:	Can you change the battery
Answer:	Hi The 17.8" is for the height Thanks
Question:	are cheater lenses available for this helmet as well as replacement inner and outer covers for the lens
Answer:	I have had no issues with mine. I use it daily but have never used it as a backpack, only the wheely! I would suggest contacting Outdoor Products directly about replacements.

Product features

How Antra DP9 Auto Darkening Lens works

• When 4 Arc sensors detect any welding arc, control unit switch on 3 LCD shutters, arc sensors detects no arc, the control unit switch off LCDs.
• Darkness of the shade, Sensitivity, Delay time can be set as per application requirements
• Passive UV/IR filter ensures no harmful lights can bypass

Full Neck & Head Protection Coverage

Welding produce lots of particles, debris, spatters as well as harmful radiant and strong visible lights.

DP9 has a well designed shield that blocks

• Particles, debris, spatters
• UV/IR radiant

Crystal Clear Lens with Wide Range 3/5-14

• Superb lens with top optical>
• Shade 14 is great for younger or welders with sensitive eyes , or for higher amperage/bright applications (Aluminum TIG etc.).

Hard Hat / Cheater Lens Compatible

• Magnifying lens / cheater lens compatible (Sold separately and available on Amazon: ASIN# B017IDJKMK) Great convenience for people who needs vision correction
• MSA V Guard Style hard hat Connector (ASIN: B075FH4J4C / SKU: APX-XXX-9001)
• Fiber Metal hard hat connector (ASIN: B075FCZJZH / SKU: APX-XXX-9002)

Flexible head gear machanism

• Light weight shield with multiple joint for added comfort
• Different position for flexible adjustments
• Ratchet gear with fastening spring for easy operation with welding glove on.
• Up position retaining structure to hold helmet in position when flipped up.

Easy to Operate Interface

• Power button to switch on or switch off the lens (Lens will be shut off itself in 15 minutes in dark)
• "Mode" key to cycle from "Grind" / shade 4, "Cut" / shade 5-8 , "Weld" / shade 9-13
• "Sens" key to set sensitivity from 1-9
• "Shade" key to set shade from 5-13
• "Delay" key to set delay time from 1-9

Stable performance even on low amperage DC TIG

• Handling MIG/MAG, MMA/Stick, Plasma cutting easily (Sensitivity and Delay on 4-6)
• DC TIG may require higher sensitivity setting (7-9) and delay setting (5+)
• Minimal false triggering in industrial strong metal-halide lights, on higher sensitivity if not facing lights directly. The lens will not respond to LED lights
• Minimal false triggering in sun lights, on higher sensitivity if not facing sun directly

Advanced Auto Darkening Welding Helmet Providing All in One Protection

Product description

Antra AH7-X80 Series welding helmet is featured with the digital controlled 4 sensor auto darkening lens, which is extremely fast responsive to electric arc from TIG, MIG, MMA or Plasma applications. LCD Shade display eliminate guess work, the lens stays on the shade you see! This light weight welding helmet is so versatile that it can be used on grinding, cutting and welding applications. It is a perfect upgrade for goggles and fixed shade glass welding helmet, or regular control auto helmets at a fraction of cost.

*Features:

- Manual power ON, Auto OFF. 

- Digital controlled sensitivity and delay setting with LCD display

- UV/IR Protection: Permanent Shade DIN16

- Hard hat adapter (Sold separately)

- Power off delay 30 minutes, the filter keeps alive for 30 minutes in dark environment before it goes to sleep.

*Specifications:

- Viewing Area: 98mm x 62mm/3.86" x 2.36"

- Cartridge Size: 133mm x 114mm x 9mm/5.24" x 4.5" x 0.35"

- Optical Class: 1/1/1/2

- Reaction Time: 0.00004(1/25,000) Seconds

- Dark to Light: 0.1-0.9 Seconds

- Light State: Shade DIN 4

- Dark State: Shade DIN 5-9/9-13

- DC TIG Amperage Rating: >2 Amps

- Battery Type: Solar Cell + 2X CR2032 (Replaceable)

- Helmet Material: High Impact Polyamide Nylon

- Operating Temperature: -10°C- 55°C (14°F-131°F)

- Storage Temperature: -10°C- 55°C (14°F-131°F)

- Meet Standards: ANSI Z87.1 / EN379 CE / CSA Z94.3

- Weight: 525g/18.5oz

*Spare parts:

- Exterior lens covers:ASIN# B00CILLEV8

- Inner lens covers: ASIN# B00NF7R9AO

- Head Gear: ASIN# B01M365MTP

- Hard hat adapter: ASIN# B075FCZJZH, B075FH4J4C

- Cheater Lens: ASIN# B017IDJKMK (Diopter various)

*Note: Head gear may require simple assembly.

• 【Safety & Protection】Passive Filter with Permanent shade 13 to UV/IR, combined with double-layered auto dimming LCD shutter, providing sufficient and accurate shade range within 4/5-8/9-13 to visible lights; Meets ANSI Z87.1 Standards
• 【Comfort & Convenience】Luxury large viewing area fully automatic lens 3.86X2.36" (9.1 SQI), more comfortable to have a clear view of joints and welding puddle, getting better control on the whole welding process and beautiful beads finish; Inside shade setting with memory settings to avoid accidental changes and great to be used in tight spaces
• 【Performance】4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time and accurate auto shading, minimizing harmful radiant bypass, avoiding eye stress
• 【Reliability】Interference Suppression Technologies, minimizing false triggering: less sensitive to sun lights, workshop lights while very responsive to welding arc, even the hardest to detect DC TIG: Rating > 2 Amps; Corner spread arc sensors provides more coverage, reducing blockage in complicated welding positions
• 【Versatility】A great auto dim lens that can handle multiple processes of Plasma Cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding, which are popular in metal fabrication industry, welding schools, welding shops, auto manufacturing and repair industry, ship factories as well as DIY hobbyists projects

User questions & answers

Question:	Is a rechargeable battery needed for the replacement battery or can it be regular? Lithium
Answer:	I use 2"X4&1/4" in my helmet.
Question:	how does the battery charge
Answer:	Hi Jake. I'm not sure of the model drill press you have but I'll give you dimensions of the vise and you can determine if it will fit. The vise is 5"w x 4-3/4"long. The 4 slots are 1/2"x2". The slots are 4" on center and 1/2" from each side making up the 5" width. There is 1/4" metal between each slot making up the 4-3/4" length. I believe it's made well enough for small work and is fine for my table top drill press. It is smaller than what you will find at Home Depot or LOWES, which were a little too large for my drill press. I hope this helps.

Product description

Description:

- Solar powered auto-darkening filter welding mask .

- High strong materials and fire retardant, can prevent , anti-aging.

- High definition protective filter, clearly see the conditions when welding.

- Features: Auto-darkening, Fire retardant, UV & IR protection, Solar panal+li battery, High definition protective filter, Comfortable wearing, Full face coverage, Adjustable head-strap, Adjustable sensitivity and delay time, Grinding and welding mode, DIN adjustable.

- Suitable for , MAG, MIG, MMA, Stick & TIG welding, or Plasma cutting.

Specification:

- Material: PP

- Size: Approx. 34x22x23 cm / 13.4x8.7x9.1 inch

- Light shade: DIN 4

- Dark shade: DIN 9 - 13

- Auto switch time: light to dark is 1/25,000 seconds

- Dark to light: 0.1-1.0s (switching by variable adjustment knob)

- Sensitivity: high-low (stepless adjustment)

- Power Supply: solar cell + replacable backup (CR2032)

- Viewing area: 93x43 mm / 3.66x1.69 inch

- View glass: 110x90x9 mm / 4.3x3.5x0.35 inch

- Working temperature: - 5℃~ +60℃

- Limited working temperature range: -10℃~+70℃

Package Includes:

1 Piece Auto Darkening Solar Power Welding Mask

3 Piece Lens

1 Piece Manual

• Solar powered auto-darkening filter welding mask .
• High strong materials and fire retardant, can prevent , anti-aging.
• High definition protective filter, clearly see the conditions when welding.
• Features: Auto-darkening, Fire retardant, UV & IR protection, Solar panal+li battery, High definition protective filter, Comfortable wearing, Full face coverage, Adjustable head-strap, Adjustable sensitivity and delay time, Grinding and welding mode, DIN adjustable.
• Suitable for , MAG, MIG, MMA, Stick & TIG welding, or Plasma cutting.

• 【Safety & Protection】Passive Filter with Permanent shade 14 to UV/IR, combined with double-layered auto dimming LCD shutter, providing sufficient and accurate shade range within 4/5-9/9-14 to visible lights; Meets ANSI Z87.1 Standards
• 【Comfort & Convenience】Luxury large viewing area fully automatic lens 3.86X3.23" (12.5 SQI), more comfortable to have a clear view of joints and welding puddle, getting better control on the whole welding process and beautiful beads finish; light total weight reduces neck stress; Inside shade setting to avoid accidental changes and great to be used in tight spaces; Shade 14 is a great asset for high visible lights applications like aluminum TIG
• 【Performance】4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time and accurate auto shading, minimizing harmful radiant bypass, avoiding eye stress
• 【Reliability】Interference Suppression Technologies, minimizing false triggering: less sensitive to sun lights, workshop lights while very responsive to welding arc, even the hardest to detect DC TIG: Rating > 2 Amps; Corner spread arc sensors provides more coverage, reducing blockage in complicated welding positions
• 【Versatility】A great personal protective equipment (PPE) that can handle multiple processes of Plasma Cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding, which are popular in metal fabrication industry, welding schools, welding shop, auto manufacturing and repair industry, ship factories as well as DIY hobbyists projects

User questions & answers

Question:	Where are Antra welding helmets made
Answer:	There is an identical product called Digiflash 2 which does. It's about $12 more.
Question:	What is the response time for darkening
Answer:	Thanks for contacting us. The height of crawling hedgehog statue is 6.2" Tall.
Question:	Will the batteries charge while in grind mode
Answer:	It is not in front of me as I am at work, but I would guess it is about 15-18 inches tall. About the exact size of a real Key West rooster! I LOVE it!
Question:	what size len covers does this take
Answer:	Hi there and thank you for your question, The medium golden rooster stands 15.75" tall, while the large golden rooster stands 20" tall. So a difference of a little more than 4". Hopefully that helps; let us know if you have any other questions. Cheers!

Product features

Bigger is always better

• Luxury viewing size of 12.5 SQI provides comfort working zone, almost doubled when compared to entry level lens
• Easy to access awkward spots with smaller viewing size helmets

True Color Lens with 4 corner-spread sensors

• Blue light reduction lens (Optical Class 1/1/1/2) provides clear viewing and blue light protection, and helps to lay solid beads.
• More covered area than 2-sensor or in-line 4 sensor design.
• Quicker response time and more flexible when used in applications with partially blocked view.

One helmet , multiple processes

This unit is working on most of ARC related applications including but not limited to:

• Gas Tungsten Arc Welding (GTAW), also known as Tungsten Inert Gas (TIG) welding, DC or AC
• Gas Metal Arc Welding (GMAW), sometimes referred to by its sub-types Metal Inert Gas (MIG) Welding or Metal Active Gas (MAG) welding
• Flux-cored Arc Welding (FCAW or FCA)
• Shielded Metal Arc Welding (SMAW), also known as Manual Metal Arc welding (MMA or MMAW), flux shielded arc welding (stick welding)
• Plasma Cutting (PAC)
• Plasma Arc Welding (PAW)
• Grinding

(Note: Different settings may be required for each application.)

Antra's Interference Suppression Technologies enables A77D to:

• Detects and response consistently on DC welding arc as low as 2 Amps
• Minimize false triggering in industrial Metal-halide lights, on higher sensitivity setting if not facing lights directly
• Minimize false triggering in sun lights, on higher sensitivity if not facing sun directly

Easy to adjust settings

• SHADE 14 Capability: According to OSHA Fact Sheet Shade 14 is recommended by ANSI and AWS for the following applications: - SMAW (MMA): >250A

- GMAW (MIG), FCAW: >250A

- GTAW (TIG): >150A

As a rule of thumb, start with a shade that is too dark to see the weld zone. Then, go to a lighter shade which gives a sufficient view of the weld zone without going below the minimum. Shade 14 is great to start especially for young people who have more sensitive eyes.

• Grinding Mode: Set the switch to Grind, the lens will stay on shade 4, will not be activated by any arc.

WARNING: Switch "Weld" mode to avoid accidental flashes.

• Shade Adjustment: First set the SHADE RANGE using the range selector switch, "5-9" or "9-14", then use the Shade dial to set the desired shade numbers.
• Delay Control: Dark to Clear Delay, to avoid glow flashes from the hot bead. Turn clockwise, the delay time will be increased.
• Sensitivity Control: Controls how sensitive the sensors are responding to welding arc. Proper setting can avoid false triggering from adjacent arc while ensures auto darkening when needed. Turn clockwise, the sensitivity will be increased. Set the sensitivity highest, and decrease if there false triggering exists.
• All internal settings is great for people who need to work in limited spaces

• 【Safety & Protection】Passive Filter with Permanent shade 13 to UV/IR, combined with double-layered auto dimming LCD shutter, providing sufficient and accurate shade range within 4/5-9/9-13 to visible lights; Full face neck coverage protecting welders from spatters and harmful radiant; Meets ANSI Z87.1 Standards
• 【Comfort & Convenience】Luxury large viewing area fully automatic lens 3.86X3.50" (13.5 SQI), more comfortable to have a clear view of joints and welding puddle, getting better control on the whole welding process and beautiful beads finish; light total weight reduces neck stress; Inside shade setting to avoid accidental changes and great to be used in tight spaces
• 【Performance】4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time and accurate auto shading, minimizing harmful radiant bypass, avoiding eye stress
• 【Reliability】Interference Suppression Technologies, minimizing false triggering: less sensitive to sun lights, workshop lights while very responsive to welding arc, even the hardest to detect DC TIG: Rating > 2 Amps
• 【Versatility】A great personal protection equipment that can handle whole process of Plasma Cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding, which are popular in metal fabrication industry, welding schools, welding shops, auto manufacturing and repair industry, ship factories as well as DIY hobbyists projects

User questions & answers

Question:	Does this fit a hard hat
Answer:	I asked myself that question when I was in the moment in purchasing either the AH6 or AH7. I based my purchased on the specifications of both items and the AH7 won by having better clarity and larger view. In my opinion the extra $5 dollars it's worth it over the AH6.
Question:	Where is this made and what is the warranty? is it a usa warranty
Answer:	Yes, you can insert a cheater lens. I use one in mine.
Question:	Which is better...this one or the previous model AH
Answer:	It requires 2 non-rechargeable 3v, CR2032 lithium batteries.
Question:	Is this cheater lens compatible
Answer:	Solar, from the arc process

Product features

Bigger is always better

• Luxury viewing size of 13.5 SQI provides comfort working zone, which is twice larger when compared to entry level lens
• Easier to see awkward spots than smaller viewing size helmets, more flexible to be used in different scenarios.

Clearer Lens with Blue Lights Suppression

• Blue light reduction lens (Optical Class 1/1/1/2) provides clear viewing and blue light protection, and helps to lay solid beads.
• 4 Redundant sensors ensures high reliability and durability.
• Quicker response time and more flexible when used in applications with partially blocked view.

One helmet , multiple processes

This unit is working on most of ARC related applications including but not limited to:

• Gas Tungsten Arc Welding (GTAW), also known as Tungsten Inert Gas (TIG) welding, DC or AC
• Gas Metal Arc Welding (GMAW), sometimes referred to by its sub-types Metal Inert Gas (MIG) Welding or Metal Active Gas (MAG) welding
• Flux-cored Arc Welding (FCAW or FCA)
• Shielded Metal Arc Welding (SMAW), also known as Manual Metal Arc welding (MMA or MMAW), flux shielded arc welding (stick welding)
• Plasma Cutting (PAC)
• Plasma Arc Welding (PAW)
• Grinding

(Note: Different settings may be required for each application.)

Antra's Interference Suppression Technologies enables AH7-860 to:

• Detects and response consistently on DC welding arc as low as 2 Amps
• Minimize false triggering in industrial Metal-halide lights, on higher sensitivity setting if not facing lights directly
• Minimize false triggering in sun lights, on higher sensitivity if not facing sun directly

Easy to adjust settings

As a rule of thumb, start with a shade that is too dark to see the weld zone. Then, go to a lighter shade which gives a sufficient view of the weld zone without going below the minimum.

• Grinding Mode: Set the switch to Grind, the lens will stay on shade 4, will not be activated by any arc.

WARNING: Switch "Weld" mode to avoid accidental flashes.

• Shade Adjustment: First set the SHADE RANGE using the range selector switch, "5-9" or "9-13", then use the Shade dial to set the desired shade numbers.

5-8 is great for some low amp application and small current plasma cutting jobs.

• Delay Control: Dark to Clear Delay, to avoid glow flashes from the hot bead. Turn clockwise, the delay time will be increased.
• Sensitivity Control: Controls how sensitive the sensors are responding to welding arc. Proper setting can avoid false triggering from adjacent arc while ensures auto darkening when needed. Turn clockwise, the sensitivity will be increased. Set the sensitivity highest, and decrease if there false triggering exists.
• All internal settings is great for people who need to work in limited spaces

Product description

'Welding Helmet, Auto-Darkening, Lens Shade 3, 5 to 8, 8 to 13, 3.0 Welding Helmet Light State, Viewing Area 3.81 In. x 2.62 In., Welding Helmet Color Silver, Welding Helmet Material Nylon, T94(TM) Series, Grind Mode Yes, Electromagnetic Sensor Yes, Number of Arc Sensors 4, Switching Speed 1/20,000 sec., Graphics None, TIG AMP Rating 3A, Power Source Battery, Headgear Ratchet, ADF Controls Digital, Battery Type CR2450 Lithium, Battery Life 1500 hr.'

• Price For: Each

User questions & answers

Question:	Can you fit this onto a hard hat
Answer:	Yes.
Question:	Where is it made
Answer:	I asked the end user, and he responded, yes, they just snap right out if need.
Question:	Can you wear glasses with this helmet
Answer:	Will need adaptors for it. It will need adaptors for MSA hard hat or Fibre metal depending on version of the head gear.
Question:	Are the shade 5 windows on the sides removable if you need to replace them
Answer:	Antra is headquartered in Wuxi, China. I assume it was made there but I don't know where the warrantee is set from. This is the best helmet of the previous 4 I've owned, hope that helps.

Product description

Description:

- Solar powered auto-darkening filter welding mask .

- High strong materials and fire retardant, can prevent , anti-aging.

- High definition protective filter, clearly see the conditions when welding.

- Features: Auto-darkening, Fire retardant, UV & IR protection, Solar panal+li battery, High definition protective filter, Comfortable wearing, Full face coverage, Adjustable head-strap, Adjustable sensitivity and delay time, Grinding and welding mode, DIN adjustable.

- Suitable for , MAG, MIG, MMA, Stick & TIG welding, or Plasma cutting.

Specification:

- Material: PP

- Size: Approx. 34x22x23 cm / 13.4x8.7x9.1 inch

- Light shade: DIN 4

- Dark shade: DIN 9 - 13

- Auto switch time: light to dark is 1/25,000 seconds

- Dark to light: 0.1-1.0s (switching by variable adjustment knob)

- Sensitivity: high-low (stepless adjustment)

- Power Supply: solar cell + replacable backup (CR2032)

- Viewing area: 93x43 mm / 3.66x1.69 inch

- View glass: 110x90x9 mm / 4.3x3.5x0.35 inch

- Working temperature: - 5℃~ +60℃

- Limited working temperature range: -10℃~+70℃

Package Includes:

1 Piece Auto Darkening Solar Power Welding Mask

3 Piece Lens

1 Piece Manual

• High definition protective filter, clearly see the conditions when welding.
• High strong materials and fire retardant, can prevent , anti-aging.
• Solar powered auto-darkening filter welding mask .
• Features: Auto-darkening, Fire retardant, UV & IR protection, Solar panal+li battery, High definition protective filter, Comfortable wearing, Full face coverage, Adjustable head-strap, Adjustable sensitivity and delay time, Grinding and welding mode, DIN adjustable.
• Suitable for , MAG, MIG, MMA, Stick & TIG welding, or Plasma cutting.

Product description

Description:

- Professional welding goggles: This solar auto darkening welding goggle is made of high-quality PP material, sturdy and durable to use; Designed with soft rubber, very comfortable to wear for a long time; It also features anti-ultraviolet, infrared radiation, anti-glare, can well protect your eyes during works.

- Auto-darkening design: Auto-darkening filter automatically changes from a light state to a dark state when an is struck, and it returns to the light state when welding stops.

- Well protection: The welding goggles with adjustable shade are designed to protect the eyes from sparks, and harmful radiation.

- Convenient to use: Legs can adjust the length, and with head-mounted strap, automatic variable light lenses lightweight and convenient, with impact resistance, the use of more secure and assured

- Widely applications: Easy and safe to operate, lightweight design; Applicable to electric welding, gas shielded welding, argon welding, electric saw, welding, etc.

Package Includes:

1 Pair of Auto Darkening Welding Glasses

Note:

Color might be slightly different due to the color calibration of each individual monitor.

Please allow slight measuring deviation due to manual measurement.

• 【Auto Darking Design】Auto-darkening filter automatically changes from a light state to a dark state when an is struck, and it returns to the light state when welding stops.
• 【With Adjustable Shade】The welding goggles with adjustable shade are designed to protect the eyes from sparks, and harmful radiation.
• 【Convenient to Use】Legs can adjust the length, and with head-mounted strap, automatic variable light lenses lightweight and convenient, with impact resistance, the use of more secure and assured.
• 【Professional Welding Goggles]】This solar auto darkening welding goggle is made of high quality PP material, sturdy and durable to use; Designed with soft rubber, very comfortable to wear for long time; It also features anti-ultraviolet, infrared radiation, anti-glare, can well protect your eyes during works.
• 【Widely Applications】Easy and safety to operate, light weight design; Applicable to electric welding, gas shielded welding, argon welding, electric saw, welding, etc.

Product description

KT Industries "Spider" Auto Darkening Welding Helmet (4-1051)



K-T Elite series helmets offer shades 4-13 for a wider variety of welding applications. They are made of strong, yet lightweight, molded nylon with a ratcheting headgear and moisture absorbing headband lining. Users can customize the fit with a special up/down, forward/backward headband mechanism, reducing fatigue of the head and neck. The sensitivity adjustment knob is located on the inside control panel with all other controls, making it more convenient to adjust. Upon striking an arc, the filter automatically changes from clear to dark in only 1/30,000 of a second. K-T helmets have four optical sensors for better arc detection. The operator can set the delay time for the filter screen to change from dark to clear state - short, medium or long. Dual-purpose welding or grinding mode.  



K-T's helmet is powered by high-performance solar cells and two long-lasting lithium-ion batteries. A battery test feature is located on the control panel for easy battery testing. ADF lens conserves power by going to standby after 5 minutes of inactivity. The K-T Elite series lens received CE class 1/1/1/1. The highest rating in optical clarity and high definition.



Additional Product Info

-Mask Size: 12x8x9

-Lens Size: 4.00” x 2.56”

-2.0 magnifying lens is included with each helmet

-Conforms with ANSI and CE safety standards

-Design: Spider

-Product Type: Welding Helmet

-Manufacturer: K-T Industries

-Manufacturer SKU: 4-1051

• KT Industries "Spider" Auto Darkening Welding Helmet (4-1051)
• Prefect for welding and grinding
• Mask Size: 12"x 8"x 9", Lens Measurement: 4.00” x 2.56”
• Battery and solar powered, dark to clear delay adjustment.

Product description

This durable helmet features a large viewing field of 3.93" x 2.36" offering an unobstructed view during all stages of the welding process, without the need to lift the hood. The Jackson Safety Ultra-Lightweight Insight Welding Helmet offers variable shades from 9 to 13 with easy to use digital controls, and sensitivity & delay adjustments for different tasks and durations. Protecting the user's eyes from the radiant energy during the weld or grind mode, this product is efficient and economical as it meets ANSI Z87.1 2010 standards and is CSA Compliant. Established in 1933, Jackson Safety has built a century long reputation for delivering the most innovative safety solutions in the welding and personal protective equipment industries. When it comes to providing safety solutions with long-lasting value, durability and comfort, Jackson Safety has set the standard. Whether the need is for welding protection in a steel fabrication environment, head protection on a construction site, or hearing protection at an airport, Jackson Safety provides the widest range of safety choices to meet the needs of every job and every worker.

• Durable: This durable helmet features a large viewing field of 3.93" x 2.36" offering an unobstructed view during all stages of the welding process, without the need to lift the hood
• Shade: The Jackson Safety Ultra-Lightweight Insight Welding Helmet offers variable shades from 9 to 13 with easy to use digital controls, and sensitivity & delay adjustments for different tasks and durations
• Certified: Protecting the user's eyes from the radiant energy during the weld or grind mode, this product is efficient and economical as it meets ANSI Z87.1 2010 standards and is CSA Compliant

Product features

JACKSON SAFETY 46108 Insight Digital Variable ADF Welding Helmet

The JACKSON SAFETY insight welding helmet perfectly fits your professional needs and your budget. With its variable auto-darkening Filter, easy-to-use Digital controls, and an ultra-light weight shell, you will discover the true value of this welding helmet for yourself.

Product description

Antra AH6-260 Series welding helmet is extremely fast responsive to electric arc from TIG, MIG, MMA or Plasma applications. This light weight welding helmet is so versatile that it can be used on grinding, cutting and welding applications. It is a perfect upgrade for goggles and fixed shade glass welding helmet at a fraction of cost. *Features: - Fully automatic power ON/OFF.- Knob to adjust sensitivity and delay setting- UV/IR Protection: Permanent Shade DIN13 - Hard hat adapter (Sold separately)- Battery indicator and testing- 6 Ext. and 1 Int. Lens covers included. *Specifications: - Viewing Area: 98mm x 44mm / 3.86" x1.73"- Cartridge Size: 110mm x 90mm x 9mm / 4.33" x 3.54" x 0.35"- Optical Class: 1/1/1/2- Reaction Time: 0.00004(1/25,000) Seconds - Dark to Light: 0.1-1 Seconds- Light State: Shade DIN 4- Dark State: Shade DIN 5-9/9-13- DC TIG Amperage Rating: >2 Amps- Battery Type: Solar Cell + 2X CR2032 installed (Replaceable) - Helmet Material: High Impact Polyamide Nylon- Operating Temperature: -10°C- 55°C (14°F-131°F) - Meet Standards: ANSI Z87.1 / EN379 CE / CSA Z94.3 *Spare parts list: - Exterior lens covers: Amazon ASIN# B00CIOKN6C- Inner lens covers: ASIN# B00CIXN50O- Head Gear:ASIN# B01N5HCMIX- Hard hat adapter: ASIN#B075FCZJZH, B075FH4J4C - Sweat Band: ASIN#B073XT6CCQ - Auto Darkening Lens: ASIN#B01M2DHSDR - Cheater Lens: ASIN# B017IDJKMK (Diopter various) *Note: Head gear may require simple assembly. *SAFETY ALERT*READ WARNING LABEL AND MANUALS CAREFULLY BEFORE USING THIS HELMET STOP USING THIS HELMET IMMEDIATELY IF IT FLASHES, OR WORKS IN UNEXPECTED STATUS, RECTIFY THE PROBLEM OR CONTACT ANTRA CUSTOMER SERVICE.

• 【Safety & Protection】 Passive Filter with Permanent shade 13 to UV/IR, combined with double-layered auto dimming LCD shutter, providing sufficient and accurate shade range within 4/5-9/9-13 to visible lights; Full face neck coverage protecting welders from spatters and harmful radiant; Meets ANSI Z87. 1 Standards
• 【Comfort & Convenience】 Very light total weight, reduces head and neck stress; Fully automatic auto darkening lens, eliminating flipping up and down the hood; Convenient External Gridning switch for easy switching from Welding and Grinding.
• 【Performance】 4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time and accurate auto shading, minimizing harmful radiant bypass, avoiding eye stress
• 【Reliability】 Interference Suppression Technologies, minimizing false triggering: less sensitive to sun lights, workshop lights while very responsive to welding arc, even the hardest to detect DC TIG: Rating > 2 Amps
• 【Versatility】 A great personal protection equipment designed for industrial use that can handle multiple processes of Plasma cutting, abrasive wheel cutting/grinding, DC TIG, AC TIG, MIG/MAG, MMA/Stick welding, which are poular in metal fabrication industry, welding schools, welding shops, auto manufacturing and repair industry, ship factories as well as DIY hobbyists projects

User questions & answers

Question:	how many sensors
Answer:	No, it doesn’t, comes with standard lens
Question:	Is this helmet / lens suitable for Oxy-Acetylene aluminum welding? Seems like this is a very.difficult area to get a straight answer
Answer:	Hi, No, this one can't fit over a hardhat
Question:	Is the battery replacable
Answer:	I think it is. Mine does the exact same thing. I look at it this way: it does not matter; the only adjustments that effect MIG welding are voltage and speed (and burnback on yours). I really don't pay much attention to the display, and find my settings by experimentation on similar work pieces. I suppose the current display can give you a rough starting point for settings for a given metal thickness. I think I'll start tracking that and see.
Question:	What size cheater/magnifying lens does this helmet require
Answer:	I bought this welder not even a month ago and the one I was sent does work on 110v or 220v. even comes with an adapter to plug the normal 3 prong 110v into my dryer's 220v outlet. It works wonderfully on either power source I have used both.

Product features

Antra AH6-260 Series, auto darkening, full featured welding helmet

Antra AH6-260 series welding helmet delivers high performance and is engineered for

• Professional welders
• Welding schools students
• DIYers
• Occasional Welders

How Antra AntFi-X60-2 Auto Darkening Lens works

• When 4 Arc sensors detect any welding arc, control unit switch on 2 LCD shutters, arc sensors detects no arc, the control unit switch off LCDs.
• Darkness of the shade, Sensitivity, Delay time can be set as per application requirements
• Passive UV/IR filter ensures no harmful lights can bypass

Full Neck & Head Protection Coverage

• Welding produce lots of particles, debris, spatters as well as harmful radiant and strong visible lights. AH6-260 helmet has a well designed shield that provides full neck head face protection
• UV/IR radiant is also blocked completely by the shield.

Crystal Clear Lens with Wide Range 4/5-13

• Blue Light suppression lens keeps clear vision during whole welding process and blue light is minimized
• Super fast auto darkening feature makes welder easy to see clearly before and on welding process.
• Extended light shade 5-9 offers great flexibility when it comes to low amperage welding or plasma cutting.

Hard Hat / Cheater Lens Compatible

• Magnifying lens / cheater lens compatible (Sold separately ASIN# B017IDJKMK) Great convenience for people who needs vision correction
• MSA V Guard Style hard hat Connector (ASIN: B075FH4J4C / SKU: APX-XXX-9001)
• Fiber Metal hard hat connector (ASIN: B075FCZJZH / SKU: APX-XXX-9002)

Flexible head gear mechanism

• Light weight shield with multiple joint for added comfort
• Different position for flexible adjustments
• Ratchet gear with fastening spring for easy operation with welding glove on
• Up position retaining structure to hold helmet in position when flipped up.

Easy to Operate Interface

• Fully Automatic ON/OFF, lens will switch on when solar cell detects small portion of ambient lights (Lens will be shut off itself in 15 minutes in dark)
• External Grind Switch to set "Weld or Grind" mode. When "Grind" mode is set the lens will not respond to any arc. THIS MODE IS FOR GRINDING ONLY. Switch lens out of "Grind" mode as soon as finishing Grinding to avoid accidental flash.
• "Delay" dial to set delay time to recover from Dark status to Light status. Higher amp welding or TIG may require higher setting of delay
• "Sensitivity" dial to set how sensitive should the lens respond to Arc. The higher this setting the faster the lens response to arc. This setting may have to be reduced due to interference from adjacent arc or other sources.
• Battery Indicator and Quick Darkening testing button is convenient to know the status of the lens

Stable performance even on low amperage DC TIG.

• Detects and response consistently on DC welding arc as low as 2 Amps
• Handling MIG/MAG, MMA/Stick, Plasma cutting easily (Sensitivity and Delay on 40%-50%
• DC TIG may require higher sensitivity setting (80%+) and delay setting (60%+)
• Minimal false triggering in industrial Metal-halide lights, on higher sensitivity if not facing lights directly.
• Minimal false triggering in sun lights, on higher sensitivity if not facing sun directly

Product description

' Auto Darkening Welding Helmet, Lens Shade 4, 9 to 13, Graphics None, Color Black, Plate Height 1-9/16 In., Plate Width 3-3/4 In., Viewing Area 5.8 sq. in., Headgear Ratchet, Classic Series, Material Nylon, Grind Mode Yes, Number of Arc Sensors 3, ADF Controls Knobs, Power Source Battery and Solar, Battery Type Lithium, Battery Life 2000 hr., Electromagnetic Sensor No, Switching Speed 1/15, 000 sec. '

User questions & answers

Question:	Does this model have x mode
Answer:	I'd start with 10 and see how it works. I use setting 9 because I have a cheater lense and it seems to reduce the available light.
Question:	is this helmet suitable for overhead welding
Answer:	Yes...they are called cheater lenses and they are available at most welding stores. You slide them under notches on the inside of the helmet. I use them with this helmet.
Question:	How much does this hood weigh
Answer:	It is not very flexible. I do not believe so.
Question:	how many sensors
Answer:	Is it hard plastic? If so then yes it would work although it may scratch?

Product description

The 3M Speedglas Auto Darkening Filter 9100XXi offers the same large viewing area as our 3M Speedglas ADF 9100XX. But thanks to improved optics, the 9100XXi ADF allows you to more readily recognize colors as compared to our other models.

From the Manufacturer

The 3M Speedglas Welding Helmet 9100 with Auto Darkening Filter 9100XXi helps provide professional-grade eye and face protection from debris and harmful radiation while offering better visibility. With improved optics, the 3M Speedglas Auto Darkening Filter 9100XXi allows you to more readily recognize colors as compared to our other models. Welders will see a view that is less green. Colors, shades, tone as well as light and dark contrasts will all stand out with more vivid detail. Many welders will find they have better control of the weld puddle with a view that appears lighter, brighter and more realistic. This may help you focus on your welding set-up, welding technique, precision grinding, and inspection of completed welds.

Switch Between Welding and Grinding in just 2 to 3 Seconds -- all with Your Gloves On

This helmet also comes with the 3M Speedglas Silver Front Panel 9100XXi, which offers the convenience of switching between welding mode and shade 3 grinding mode with a simple "gloves-on" touch of an external button on the silver front panel. There is no need to remove the helmet to change these settings. Memory modes allow accessing one of two pre-set welding modes. Both memory modes have an individual setting for dark shade, light to dark switching sensitivity and dark-to-light delay. An instant "Grab and Go" feature automatically turns the welding filter on to your most recent welding setting whenever you pick up the helmet. To save on power, it automatically shuts down after a period of inactivity.

Auto Darkening Filter Reacts Quickly After Striking an Arc The Speedglas lens features user-selectable dark shades of shades 5, 8, 9 through 13, and a light shade of 3. With a viewing area of 2.8 inches high x 4.2 inches wide (72 mm x 107 mm), the 9100XXi provides the largest viewing area available in the 9100 Series helmets, and an expansive field of view that helps the welder to see the work in progress with minimal obstruction. Three arc detection sensors in the lens activate the auto-darkening filter when an arc is struck. The lens then switches from light to dark shade in approximately 0.1 milliseconds (1/10,000 of a second), giving the welder an instant transition from light to dark shade while maintaining an optimal view for torch placement and weld puddle control. When the weld is complete, the filter automatically returns to light shade 3 with a delay of approximately 40-250 milliseconds, allowing almost immediate inspection of the weld pool and preparation for the next weld. Exhaust vents readily direct your exhaled air out of the helmet, helping to reduce heat, humidity and fogging of the welding filter.

The auto darkening filter can help reduce the need to flip the welding helmet up and down between torch placements, which boosts productivity by reducing the stop-and-start time needed with passive lens welding helmets. This feature can also reduce neck stain from “helmet nodding,” while greatly increasing the accuracy of torch placement. The helmet’s battery life is approximately 2,000 hours. The two Cr2030 3V lithium batteries that power the Auto-Darkening filter are easily accessible and replaceable, extending the helmet life.

The ultimate in comfort with a headband that shapes for a customized fit

3M Speedglas Welding Helmet 9100 with Auto Darkening Filter 9100XXi feature a highly adjustable, ergonomically designed head suspension system featuring:

• • Two adjustable crown straps for increased stability and weight distribution
• • Padded front headband designed to evenly distribute pressure
• • Swivel-mounted smooth ratchet system for simple, precise tightening and ergonomic fit
• • Snap adjustment of nine different helmet angles
• • Large knobs for simple adjustment of “prep” and “parking” pivot positions, even while wearing gloves
• • Fits head sizes 6.25 to 8 (50 to 64 cm) approx.

• Thanks to improved optics, the 9100XXi ADF allows you to more readily recognize colors as compared to our other models
• Grab and go with auto-on
• An improved user interface that is easy to understand
• The 3M Speedglas Silver Front Panel 9100XXi houses external controls, enabling fast and easy access to the grinding and memory modes
• 3M Speedglas Auto Darkening Filter 9100XXi offers a 2.8" x 4.2" viewing area (approx)
• Selectable Shades 5, 8-13 and Shade 3 light state
• Improved optics allow welders to see more realistic colors

User questions & answers

Question:	Is this actually the 9100xxi? The second picture shows the 9100v welding filter, the first picture shows the newer shell however
Answer:	Yes, you only get one diamond pad.
Question:	Does it come with additional inside and outside protection plates? Sweatband and storage bag
Answer:	They will last a very long time due to the fact that they ate diamond encrusted
Question:	Is this hood okay for mig and stick as well as tig
Answer:	I don't own the Bosch tool to answer your question.
Question:	Does it have the side windows
Answer:	Richard, My short answer is "yes". The MM910 sanding pad uses diamond dust for its surface; therefore, the expensive price. It is designed for "grinding" cement, plaster or mortar. Your situation might call for conventional sanding pads (MM70W or MM70P) The MM910 attaches to the Multi-Max tool through a MM14 hook and loop pad (think Velcro). Some companies make after-market accessories that retrofit to other brands so you have another avenue to find cheaper accessories. As an example, some company in China might make a universal accessory that fits Rockwell, Dremel or Porter-Cable because they all use the same layout for attachment. Regards, JLC

Product features

3M Speedglas Welding Helmet 9100, 06-0100-30iSW, with ADF 9100XXi

• Thanks to improved optics, the 9100XXi ADF allows you to more readily recognize colors
• Grab and go with auto-on
• An improved user interface that is easy to understand
• The 3M Speedglas Silver Front Panel 9100XXi houses external controls, enabling fast and easy access to the grinding and memory modes
• 3M Speedglas Auto Darkening Filter 9100XXi offers a 2.8" x 4.2" viewing area (approx)
• Selectable Shades 5, 8-13 and Shade 3 light state
• Delay function to set the dark-to-light opening time
• Sensitivity of the arc detection can be adjusted
• Ergonomic, adjustable head suspension for increased comfort, helmet stability and weight distribution