10 best kenwood car stereo speakers

• Mono subwoofer amplifier
• 500 watts RMS x 1 at 4 ohms (1, 000 watts x 1 at 2 ohms)
• Class D amp design
• Speaker-level inputs with signal Sensing turn-on
• Variable low-pass filter (50-200 Hz at 24 dB per octave)

User questions & answers

Question:	Can this amp power 3 alpine w10s4 subwoofers
Answer:	The digital channels 30-1, 30-2, 30-3 and above are technically on the same broadcast channel. In the antenna world, the broadcast channel is not necessarily the same as the number that shows up on your TV.In Detroit, where we are 4.1 is NBC and the sub-channels 4.2 and 4.3 come along with it. However it is broadcast on a channel VHF 7 in our area. You can use websites like antennapoint.com to find out the broadcast channel, which is often referred to as an RF channel or REAL channel. This device was designed after the digital transition, and is fully capable of finding and fine tuning.
Question:	im having a hard time findin a nice amp for my (2)15" kicker 2-ohm 1200w subs. i got acheap pyle 2000 watt amp and its not pushin nearly what i want
Answer:	basily the pickup ability
Question:	Will this power 4 Kenwood 5 way 6x9 speakers
Answer:	The HD7694P measures 65" long.
Question:	When setting the gain on my amp, do I set bass knob remote included all the way up or all the way down? (Not talking about the bass boost on the amp
Answer:	This wall plate amplifier provides amplified antenna signal to 2 TV sets. It does not provide 12V DC to the antenna. The 12V DC to the wall plate amplifier provides power to the amplifier and to the 12V DC socket on the plate as a convenience to power 12V DC items. The signal from the antenna is amplified to improve reception for 2 TV sets. In a typical RV installation with more than 2 TV outlets, one output from the amplifier is fed to a signal splitter in order to fed the extra outlets. That splitter may be installed inside the wall behind the wall plate amplifier. If the amplifier is turned off the amplifier switches to the cable source if connected, but does not amplify the cable signal. Here is a link to the manual. http://www.winegard.com/kbase/uploads/2451489.pdf

Product features

Kenwood KAC-9106D - Reliable performer

Kenwood makes tough, rugged amplifiers that bring you superior sound quality along with reliable performance. When you power your subwoofer with Kenwood's Performance Series KAC-9106D amplifier, you'll hear all the great tonal color, impact, and detail in your music's bass, from the hard punch of the rhythm section to the soft thump of a quiet kick drum.

CEA-2006 Compliant:

CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load, with 1% or less Total Harmonic Distortion plus noise (THD+N), and over a frequency range of 20 Hz to 20 kHz (for full range amplifiers). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4Ω. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples). Using CEA-2006 criteria, the Kenwood KAC-9106D is rated at 500 watts RMS x 1 channel with a 76 dBA signal to noise ratio. The signal to noise ratio at the rated power output (not CEA-2006 conditions) is 100 dB.

Connections:

Power Connections: The power and ground connections are 0.55" wide screw terminals. The remote turn-on screw terminal is 0.335" wide. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended. The manual lists a minimum of 10 gauge wire for power and ground, but given the 120 amp fuse value and the current consumption specification of 65 amps, we recommend a 4 gauge wiring kit.

Speaker Outputs: There are two pair of 0.335" wide screw terminal speaker outputs; they are internally wired in parallel, making it easy to connect two subwoofers. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are also recommended for the speaker wires.

Controls:

Gain: To accommodate the varying range of signal levels from today's factory and aftermarket radios, the KAC-9106D features an adjustable gain control, 0.2-5.0 volts line level (RCA) and 4.0-12.0 volts speaker level.

Crossover: The built-in 24 dB/octave low-pass filter has a continuously variable crossover point, 50Hz to 200Hz. Because this is a subwoofer amp, the crossover is always engaged.

Bass Boost: The bass boost is adjustable from 0-18dB at 40Hz.

Product description

Gain a rich, full sound, thanks to a strong polypropylene woofer and a resilient butyl rubber surround that shrugs off weathering and provides support no matter what. A substantial soft dome tweeter supplies all the delicate high-frequency details without any harshness.

• Coaxial Design- Coaxial speakers or full range speakers as they are also known as offer higher quality sound than their dual cone counterparts. The tweet at the helm of the cone allows higher end frequencies (high notes) to be distributed out. This also does not require a separate crossover to fit them.
• High Power These speakers allow up to 150W RMS to each speaker and 700W peak power for both. Which is fairly high for a 6" X 9" speaker! These speakers can be run on your headunit or via a separate amplifier.
• Dimensions With Grill (LxWxD) 266.1 X 197.3 X 108.6 mm Dimensions Without Grill (LxWxD) 218.5 X 164 X 92.5 mm

Product description

The Kenwood DMX9720XDS is a car audio marvel. The very real and very new 10.1' screen is 1280x720P which is featured on on the DNX9190DABS. Other features include DAB, Apple Car Play, Android Auto, WiFi, Hi Res Audio and 4 camera inputs. Floating Panel Mechanism with 3-way Position Adjustment The robust floating mechanism generates less vibration even on a rough road. It can be installed regardless of the size of the cluster panel opening. In addition, it is possible to adjust the position of the display in the three following ways, so you can fit a large screen in more vehicles. Powerful 10,1” HD Display DMX9720XDS adopts a 10.1 inch HD display providing room for more information that is large and easy to comprehend with just a glance. The KENWOOD DMX9720XDS features an electrostatic capacitive touch panel and HD 1280 x 720 pixel LCD panel with high luminance white LED backlight and superior wide viewing angles. High-Resolution Audio Wireless LDAC is an audio compression technology that enables High-Resolution Audio sources to be transmitted via Bluetooth. It is possible to transmit about 3 times the data amount compared to the conventional Bluetooth codec (SBC). High-Resolution Audio sources can be processed without down-converting them to lower frequencies and lower bit counts. With these features, unprecedented, high-quality audio is realised. Digital Audio Broadcasting (DAB) DAB is a digital radio technology for broadcasting radio stations, used in various countries in Europe. In comparison to traditional AM and FM radios, DAB delivers cleaner, crisper sound due to the noise reduction implemented. Furthermore an upgraded DAB+ was released in 2007, which features a higher audio quality and better reception. Apple CarPlay via Wi-Fi & USB Apple CarPlay gives iPhone users an intuitive way to make calls, use Maps, listen to music and access messages with just a word or a touch. With iOS 12.0 and higher, 3rd party navigation apps like Google Maps™ are also supported. Wireless connection is available on compatible iPhones. Some features, applications and services are not available in every region. For details, see: www.apple.com/ios/feature-availability/#applecarplay-applecarplay Android Auto via Wi-Fi & USB Android Auto is a simple way to use your Android phone in the car. The KENWOOD receiver combine an intuitive voice controlled interface with a large touch screen and superior sound quality, allowing you to enjoy features including Google Maps and more. Wireless connection is available on compatible Android phones. Some features, applications and services are not available in every region. For details, see: www.android.com/auto/ Wireless Mirroring for Android Wireless Mirroring is a ground-breaking solution for seamlessly displaying and controlling your smartphone apps on the receiver large screen without cables or even a network connection. The feature is available on compatible Android phones 4 Camera Inputs DMX9720XDS features 4 camera inputs which allow for the utmost in convenience, flexibility and safety. You can connect a KENWOOD dash cam (DRV-N520 sold separately) (or a front camera), rear and blind view (left / right) cameras. Setting of camera type and display switching between 4 cameras can be operated easily via the receiver large screen. AV input is assignable as 4th camera input. HD Rear / Front Camera Input The optional CMOS-740HD camera can be connected to the rear or front camera inputs of the receiver, displaying the image in true HD (1280 x 720 pixels) on the large DMX9720XDS screen. This unit needs to be pro installed by one of our stores, you will need to travel to the store for installation. If you order online, you will be contacted to make arrangements for installation. The unit will not be delivered to you, as the amount you pay will be a deposit on the headunit. The amount you pay online will be refunded on the day of installation, you will need to pay the full amount instores. INSTALLATION COSTS AND FITTING PARTS COST ARE NOT INCLUDED. THEY WILL BE COSTED SEPERATELY. PLEASE CALL ONE OF OUR STORES BEFORE ORDERING.

• A direct competitor to the Alpine Halo 9 and Pioneer Evo series. The DMX offers a massive 10.1" touchscreen. Features like 4 camera inputs, enhanced Apple Car Play and Android Auto connectivity and floating panel mechanism with 3-way position
• Monitor Features 10.1” High Definition Display with Capacitive Touch Screen. OCA is used to eliminate the air layer and suppress light reflection and glare. Protective Film with Anti-Glare, Anti-Fingerprint and Anti-Reflection. Variable colour key illumination. Floating Panel Mechanism with 3-way Position Adjustment: Tilt (45° ~ -10°) / Up / Down (fixed by screws) & Forward / Backward (fixed by screws) 3 Display mode: Full(Initial)/Auto(Full/Normal/Regular)/Normal. Screen adjustments: Noon/night brightness, tint, colour, contrast, black & backlight. Dimmer sensor: Manual / Sync. Dimmer level: Auto / On / Off. Screen viewing angle adjustment to provide the best visibility at any viewing angle. NTSC / PAL judge. Display OFF mode. Graphical User Interface
• Connectivity: OEM Display Input/Output. Wired steering wheel remote adapter interface ready. (Optional interface needed). Programmable Direct steering wheel remote (resistor ladder type only). (3 Wire: ST REMOTE INPUT 1 / ST REMOTE INPUT 2 / ST REMOTE GND) AV-in (Mini-jack)(Switchable: Camera-in or AV-in), optional CA-C3AV advised. HDMI input. RCA Video-out (source: AV-in or USB). Front Camera Input with mirror function. Rear Camera Input with mirror function. Front & Rear Camera Input are compatible with optional HD camera CMOS-740HD. Multi view camera control line in for optional CMOS-320. DashCam link: Control & Play recorded DashCam movies (with optional DRV-N520). USB2.0, 20cm pig Tail (back-side). 3 RCA’s pre-outs (Front / Rear / Subwoofer). GPS/Glonass antenna input. Speedpuls input wire & Gyro sensor. FM/AM antenna input. DAB antenna input (SMB type). Microphone input for Hands-free microphone: 3,5mm mini-jack. Reverse sensor wire. Parking brake sensor wire. ACC Control wire. Dimmer sensor wire. Power-/Antenna-Control wire.
• Item Package Quantity: 1

• 400 watt peak power handling 6x9 For strong bass performance
• Polypropelene cone for long last performance

User questions & answers

Question:	Are these compatible with 2011 Kia Sportage
Answer:	Cruch field will tell all your car speaker sizes
Question:	Will these fit in 2001 gmc sierra 1500 pickup
Answer:	Yes...The GM full size Truck/SUV have 6 1/2 holes but they will fit 6 3/4.
Question:	Is this a pair of speakers or a single speaker? Assuming it's a pair, but the description says "speaker", not "speakers," so want to be sure. Thanks
Answer:	This is for a pair of speakers.
Question:	Is this sold by the pair or by single speaker
Answer:	It is a pair and sound great for the price!
Question:	Do these fit 2008 gx470 lexus
Answer:	They will fit in any standard 6x9 opening. If your vehicle has stock speaker brackets/mounts, I recommend you SAVE THEM as you may need them for the new speakers.
Question:	Thinking about getting these for my 97 ram 1500. Are these the best bang for your buck
Answer:	Not if you want mid bass or any bass that doesn't distort. You will need a crossover for the high side is worth it. I recommend infinity kappa series for two range or 3 range sound.
Question:	Will these fit in a 98 dodge stratus
Answer:	Check Sonic Electronix online. You type in the year, make and model and it will tell you the speaker size you need along with its location. I recommend everyone look there first.
Question:	Do these speakers need a resonance chamber behind them as you would build for woofers
Answer:	It needs that and then some. Not a warm sounding speaker. You really need to not expect much, however the mods and highs are clean. With the chamber and a crossover you will clean up the lows and highs with the high pass out to these. I hope that helps.

Product features

Rockford Fosgate Prime 6" x 9" 3-Way Full-Range Speaker

The R169X3 is a 6”x9” 3-way full-range speaker rated at 65 watts RMS for a new generation of factory replacement speakers. Kit includes integrated high-pass crossovers and mounting hardware.

The speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome pole mounted Piezo tweeter and midrange. Includes grilles so they look as good as they sound.

Kenwood KFC-6966S - Sport Series 6"x9" 3-way car speakers

The KFC-6966S 6"x9" 3-way speakers feature polypropylene cones that will enrich your music with solid midbass oomph and dynamic midrange, while the 1" balanced-dome tweeters and ceramic supertweeters will bring new life to the high range. Kenwood also includes sharp-looking grilles in case you're doing a custom installation in your vehicle. Best of all, you can safely power these with your car stereo and still enjoy your music the way it was meant to be heard, with clarity and emotion.

Sound Field Enhancer

To improve sound quality

Enlarged magnet circuit

To realize clear sound

Only 7/16"of mounting height

To fit for wider car selection

• Pair of 5-way speakers takes your car audio experience to whole new level
• Drivers include woofer, midrange, tweeter, and 2 super tweeters for full sound coverage
• Recommended power of 150 watts RMS with 650 watts of peak power
• Woofer cone features diamond array pattern to reduce distortion
• Sound Field Enhancer aids performance with high frequencies

User questions & answers

Question:	Is it 600 watts combined or each speaker is
Answer:	They are 650 watts each it says so on the back of the speaker and they are 150 watts rms each
Question:	Will they fit in a 2014 Nissan Altima
Answer:	If the Altima has 6x9 they should.
Question:	How many speaker's come with 1qty
Answer:	2, They come in pairs.
Question:	It's one speaker or two speakers
Answer:	It’s 2 speakers. Buy it you won’t regret it, probably the most crystal clear 6x9s when hooked up correctly

Product features

Kenwood KFC-6996PS - 6x9" Oval 5-way 5 Speaker

KFC-6996PS 6"x9" speakers rock a polypropylene cone with a diamond array pattern, which minimizes distortion, while a rubber surround ensures overall durability. All the musical details are handled by the balanced dome tweeter and three supertweeters, and dispersion is improved by Kenwood's proprietary Sound Field Enhancer.

Kenwood's Acoustic Sound Harmonizer uses slots on the mount housing the tweeters to improve the transition to the higher frequencies, so you'll experience a smoother sound overall. Grilles are included for custom installations.

Acoustic Sound Harmonizer

Produces a smooth and natural sound by controlling woofer sound waves and allowing only certain frequencies to pass through the holes of the tweeter panel.

Factory Location Fit

The tweeter height is designed as low as possible, allowing the speakers to easily fit in most factory locations.

Sound Field Enhancer

This unique shape of the tweeter creates strong frontward sound as well as a wider sound field in 5kHz and higher frequencies.

Product description

The KFC-S1066 Stage Sound Series, 10cm Flush Mount 2-Way 2-Speaker System

Set Contains:

Speakers

• Easy to Install
• 2-Way 2-Speaker System
• 10 cm Polypropylene Woofer Cone
• 220W Peak Power
• Speaker grill included

User questions & answers

Question:	Is it 2 pairs of speakers or just one
Answer:	It should. I think thise seats are smaller than mine. I have a nitro and it stretched pretty well.

Product description

The Kenwood kfc-s1356 stage sound series 13cm flush mount dual-cone speaker system.

• Easy to install
• Dual Cone speaker system
• 13 cm polypropylene woofer Cone
• 260W peak power
• Speaker Grill not included

Product description

The Kenwood kfc-s1056 stage sound series 10cm flush mount dual cone speaker system 220W.

• Easy to install
• Dual Cone speaker system
• 10 cm polypropylene woofer Cone
• 220W peak power
• Speaker Grill not included

Product description

The Kenwood kfc-s1366 stage sound series 13cm flush mount 2-way 2-speaker system.

• Easy to install
• 2-Way 2-speaker system
• 13 cm polypropylene woofer Cone
• 260W peak power
• Speaker Grill included

• Frequency Response: 60Hz - 20,000Hz
• Impedance: 4 ohms
• Woofer: Water Resistant PP Cone
• Tweeter: 1" Balanced Dome Tweeter
• Mounting Depth: 2-7/16"

User questions & answers

Question:	They look white in the picture but the description says tan. Are they white or tan
Answer:	The speakers were white. Look nice in my boat with new white upholstery.
Question:	Will these speakers fit as outside travel trailer replacements? Is the screw pattern the same
Answer:	Is the screw pattern the same as what? You will need to download the installation instructions of the new Kenwood speakers and see exactly what the screw pattern is. In the instructions they have a diagram depicting the screw pattern and measurements.
Question:	I am looking to replace aquavibe wr85b | marine waterproof 6 1/2" 2-way speakers with these on my rv
Answer:	Not sure what your question is, but we put these in our boat, we are quite picky about speakers, and they outdid outlets expectations. Quite pleased.
Question:	Will they fit my 2002 ultra classic
Answer:	I doubt it. I went with the Hog Tunes set up with the 140 watt amp that installs in the batwing. Sounds great!

Product features

Kenwood KFC-1653MRW - 6-1/2" 2-way marine speakers (White)

Kenwood designed their marine speakers to bring power and precision to your boat's sound system. Designed specifically for marine use, Kenwood KFC-1653MRW 6-1/2" speakers feature water-resistant cone woofers and 1" balanced dome tweeters. Feed them up to 50 watts RMS (150 peak), and they'll sound great whether you're out on the water or relaxing at the marina.

Woofer

The woofers use water-resistant cones with Santoprene rubber surround.

Ready to rock the boat

Kenwoods are designed to shrug off the harmful effects of water, salt, and sun, too. With black UV-resistant grilles, composite speaker baskets, and stainless steel hardware, they'll give you outstanding performance for years to come.

Balanced Dome Tweeter

Each speaker features a 1.0" balanced dome PEI (Poly-Ether-Imide) tweeter; PEI is a polymer film that produces a wide soundstage for superior imaging.