3 best pumps for suctions

Product description

The Champion Power Equipment 66520 2-inch Semi-Trash Gas-Powered Water Transfer Pump with Hose and Wheel Kit comes with everything you need to start pumping (just add oil and gas). Capable of passing solid waste up to 9/16 of an inch in diameter, this transfer pump is the perfect solution for moving water quickly and efficiently. Whether you are draining or refilling your swimming pool, removing water from your basement or draining shallow flooded areas, this unit features a self-priming design that holds prime even when it’s not running (requires initial priming to operate). This lightweight and portable transfer pump has a maximum delivery volume of 158 gallons per minute and is capable of passing solid waste up to 9/16 inch in diameter. With a 2-inch NPT inlet and NPT 2-inch outlet, this unit has a total head of 98 feet and a suction head of 26 feet. The complete hose kit provides everything you need to get your pump into action, including a 12-foot intake hose, a 20-foot discharge hose, cam action quick coupler, intake strainer, hose clamps, outlet hose adapter, outlet hose fitting and teflon tape. Champion’s reliable 196cc single-cylinder OHV engine has a 0.9-gallon fuel tank and 0.6-quart oil capacity (recommended 10W-30) and provides plenty of power for you to move water with confidence and efficiency. Transport your pump from one job to the next with ease thanks to the foldaway handle and never flat tires in the included wheel kit. The shaft seals are made of sturdy silicone carbide. The lightweight and durable steel frame along with this unit’s compact design make it convenient to store your pump until the next time you need it. This water transfer pump is EPA certified and CARB exempt. Buy with confidence - Champion Support and our nationwide network of service centers will back your purchase up with a 2-year limited warranty and FREE lifetime technical support.

• Dimensions: 25.0" L x 20.8" W x 19.2" H | Weight: 66.1 lb
• Complete Setup – Everything you need to start pumping - 12-foot intake hose, 20-foot discharge hose, cam action quick coupler, intake strainer, clamps, fittings and adapters (just add oil and gas)
• Efficient – 158 gallons per minute maximum delivery powered by a 196cc Champion engine with a 0.9-gallon fuel tank and 0.6-quart oil capacity
• Semi-Trash – Capable of passing solid waste up to 9/16 inch in diameter, this pump has a 2-inch inlet, a 2-inch outlet, total head of 98 feet and suction head of 26 feet
• Convenient – Featuring a durable steel frame, handle and wheel kit with never-flat tires, this pump is easy to move from one job to the next and a cinch to store
• Champion Support – Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts.Impeller Material:Aluminum

User questions & answers

Question:	I have a 12 Ft. Deep pond I want to pump out. How far down can I pump it with this. How well will this pump suction when pulling water up hill. Thanks
Answer:	the intake will hang about 11 ft down into your pond...but depending on how high up the hill is...that is where you might find problems..the grade of the hill is important as well as who long the hose going up the hill is..if your hill is 25 long and it is 10 feet higher then where your pump is..that is about the limit..what you will find is you will lose "prime"..this is the suction of the pump..and the pump may overheat causing it to shut down.
Question:	will this water pump work for me to pump water out of the lake on to my grass
Answer:	I use one of these regularly and the answer to your question as asked is yes, it will move 158 gallons of water a minute from the lake onto your grass. The pump will have to be close enough to the lake for the end of the pickup tube to be submerged in the water and there are some vertical limitations as to how high the pump can be above the lake - check the specs. Once the water gets to the pump, you've got to figure out how to handle it. It's quite a stream if the motor on the pump is cranked up. We use a 50' flexible extension in addition to the included output hose and just hold the end in our hands like a fire hose - it's hard, wet work. But it does move a lot of water and fills our need perfectly.
Question:	Where is it made? Thanks
Answer:	Apparently it is made in China for Champion Power Equipment 10006 Santa Fe Springs Road Santa Fe Springs, California.
Question:	Is this pump self-priming
Answer:	No, you have to prime it. The priming process is very easy though. I just dip a bucket into the ditch where I'm pumping from and fill up the chamber. I've thought of having another funnel to use when I pour the water in, but it really isn't necessary.

Product features

Champion 2-Inch Gas-Powered Semi-Trash Water Transfer Pump with Hose and Wheel Kit

Champion’s 2-inch Chemical Water Transfer Pump is designed for fast, efficient pumping. This unit will pump 154 gallons of water a minute and is powered by a 196cc Champion engine. With clear water fittings and constructed of chemical resistant materials, this unit is your perfect pumping solution.

Key Features

• EPDM Rubber O-ring

• Fiberglass Reinforced Polyester Pump Housing, Impeller and Volute for Chemical Resistance

• Fuel Tank – 0.9 Gallon (3.4 L)

• Diameter of Inlet and Outlet – 2 in. NPT (5 cm)

• Total Head – 115 ft. (35 m)

• Suction Head – 25 ft. (7.5 m)

• Max Delivery Volume – 154 gal/min (583 L/min)

• Durable steel frame

Easy To Operate

All of the Champion products are designed with ease of use in mind. Robust, simple to operate and easy to maintain.

Multiple Uses

Multitasking is a part of life and our products are made to offer multiple effective solutions for an array of different domestic power needs.

Lightweight

We know that sometimes you need power on the go. Champion products are designed to produce the highest level of performance in the smallest package possible.

Product description

A powerful pump in a convenient carrying case, this 1/2 HP pump has ultimate portability. The PC4 Pump delivers performance that lasts thanks to its cast-iron housing and brass hose adapters. It is easy to use, easy to carry, and will deliver dependable performance – warrantied for 1 year. Able to pump up to 1,770 gallons per hour while boosting line pressure up to 50 PSI.

The Wayne 1/2 HP 115-volt transfer water pump can pump water out of flooded basements, tanks, or boats. It can also increase line pressure by up to 40 pounds or be used to water lawns and gardens, and can even be used to wash cars and sidewalks. It's made from durable cast iron steel. The included suction strainer keeps out extraneous material, and the 3/4-inch brass hose connections resist stripping while easily connecting to garden hoses. A top-threaded priming port is easily filled, and the ball bearings have lifetime lubrication. Wayne backs its pump with a one-year limited warranty.

• This pump is Assembled in the USA with foreign and domestic parts.
• Generates up to 50 PSI at outlet hose; generates up to 15 ft. of suction lift at inlet hose.
• The product is highly durable and easy to use
• Easy installation and easy handling

User questions & answers

Question:	what is the maximum lift for 1/2 hp or a 1 hp
Answer:	If you remove the hush panel on the drivers side and look up to where the steering column passes through, it is mounted vertically against the steering column with the flat side to the right and the heat sink fins on the left, away from the steering column. There are three mounting bolts. The side with two bolts are on the front side, and the top one is difficult to remove. It is better to remove the three bolts first, then remove the three connectors from the amplifier. Familiarize yourself with the locations of the locking tabs on each connector so you can remove the harness (and you'll know when the connectors are fully reengaged when you reassemble it). When you reinstall it, attach the connectors first, because there isn't enough room on the front side to do it after it's attached. It took me about an hour and fifteen minutes to do this, and I'm an experienced DIY'er
Question:	How much current does this pump draw in normal operations? How many amps
Answer:	This amplifier worked with my 2010 Cadillac SRX Luxury model. I recommend checking with your local Mazda dealer’s parts department to determine whether the AC DELCO 20918769 is compatible.
Question:	how to prime the wayne 1/2 hp utility pump
Answer:	No
Question:	how many gallons per hour will it pump
Answer:	No It Will Not Fit Your Model Vehicle, It Shows It Only Fits (2010-2012 Cadillac SRX), And (2011 Saab 9-4X) -FastPartsAuto
Question:	Can you use an extension cord with it
Answer:	A search of Amazon shows this part is incompatible. I suggest calling your Mazda dealer to determine the manufacturer and part number of the amplifier in your particular car. This is the best way to determine if the Delco amplifier here is compatible with your Mazda 3.
Question:	does this need priming
Answer:	I read that you can only use Bose unless you change the whole system or you won't have any bass
Question:	Is this pump suitable for pumping potable (drinking) water
Answer:	This fits the 2016 Traverse that already has a factory Bose stereo system.
Question:	Can this pump be used for several hours (3+) straight provided there's a constant flow of water
Answer:	Yes, well it fit ours

Product description

The Utility Transfer Pump from SumpMarine is a 1/10th HP multi purpose transfer pump capable of transferring up to 330 Gallons per hour. This lightweight, portable utility pump is perfect for household applications and/or emergency use. Compact and easy to store, a SumpMarine Utility Transfer Pump is the perfect solution for household and light commercial use. Specifications: - Light weight, Portable Pump with metal hose connectors to a standard garden hose - Powerful 1/10th HP Motor - Capable of transferring up to 330 Gallons per Hour - Self Priming and removes water down to 1/8-inch of surface when water suction attachment is connected Included in this Package: - 1/10th HP Pump operating with standard 115V power from a wall socket - 6 foot garden hose with water suction attachment - Complete impeller replacement kit Applications: - Ideal for everyday household water transfer requirements - Perfect for water distribution such as watering lawns or gardens - Great for draining waterbeds, clogged sinks, and aquariums. This item is flammable if not used as instructed. This item may internally explode if not used as instructed.

• Heavy Duty 1/10th HP Pump operating at 115V from a wall socket with up to 330GPH pumping capacity
• Made of durable material with Metal hose connectors for higher reliability than plastic threads
• Light weight and portable. Fill pump with water, connect hoses, plug in and you're ready to go
• Perfect for household and utility applications of transferring water from one place to another
• Includes 6' hose and Water Suction attachment as well as an impeller replacement kit

User questions & answers

Question:	how much pressure does this have. I have a on demand water heater that need 20# of pressure, will this work
Answer:	This won't work. This pump probably has only 10 psi at best. I used this with a water hose to transfer a 60 gallon pond of water, it took 45 minutes to do so. Buy a bigger pump. It's nice if you only have a low demand like I did. Plus this pumps shuts off automatically every 7-10 minutes of use.
Question:	How long is the power cord
Answer:	About 4 feet.
Question:	Where can you get repair parts
Answer:	This did come with impeller replacement kit in the box. Anything other than that, I am not sure. We haven't had ours long enough to need parts.
Question:	Can I leave this pump outside during warmer weather
Answer:	I would think so but only if its protected it from the weather. The motor body has vents at the end where a cooling fan spins and if water gets in there...I dont know. Also, if it gets too hot it will shut down until it cools. Its not a sump pump, and its great for emptying say a 50 gal reservoir in 10-15 minutes but its not heavy duty.