12 best condensation pumps

Product description

Motor — 1/30 HP

Discharge — 3/8" OD barbed

Housing/tank cover — ABS

Motor cover — ABS

Volute — ABS

Tank — ABS

Impeller — Glass filled polypropylene

Check valve — Acetal



The VCMA-20ULS has a ½ gallon tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.



It is designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

From the Manufacturer

Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCMA-20ULS features a stainless steel pump shaft, a snap-action pump switch, a removable 3/8 inch barbed check valve, a 6 foot power cord, and a 1/30 horsepower high performance motor with thermal overload protection. The pump also features an ABS tank, ABS motor cover, and ABS volute. With a check valve, the VCMA-20ULS pumps 80 GPH (with a discharge head of one foot). The pump's tank has a capacity of 1/2 gallon.

• CONDENSATE REMOVAL PUMP: Little Giant Automatic Condensate Pump features safety switch, 1/2-gallon ABS plastic tank, and 6 ft. power cord; 1/30 HP pumps 80 gallons of water per hour
• AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required
• STAINLESS STEEL MOTOR SHAFT: Vertical-type pump features stainless steel motor shaft and galvanized steel tank cover; Thermally protected motor is UL and CSA listed; Includes two 1-1/8” diameter inlet openings; Maximum water temperature: 140°F
• PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow; Discharge is a 1/4" FNPT or 3/8" O.D. barbed tubing adapter
• OPERATION AND WARRANTY: The Little Giant Condensate Pump is suitable for high-efficiency gas furnace applications that produce an acidic condensate; It has a 1-year warranty
• NEED ADDITIONAL ASSISTANCE? Contact the Little Giant Technical Service Line at 1.800.701.7894 if you need help with installation, warranty issues, or you have other questions about the product

User questions & answers

Question:	Does this pump have a safety switch
Answer:	Yes, Andrew Bauer covered it well. However, you must regularly maintain the pump according to the manufacturer's instructions, or the safety switch won't work when needed. I didn't know about the maintenance requirement (thanks, installers), so my 18 year old old pump didn't stop the A/C and I ended up with water all over the place. The one time in 18 years I needed the safety switch and it didn't work! Just make sure you put pump maintenance on your calendar.
Question:	All these pumps use 3/8" tubing. I have a 40' run (3.5' max lift). I think PVC would be easier to keep the drain line straight (no sags). Thoughts
Answer:	A 40' run is a long way, but since your rise is only 3 1/2', that should not be a problem. I'm not a pro, but I expect the pump to work fine as long as you adhere to the 3/8" diameter.
Question:	I want to connect this to our dehumidifier and drain out to the utility sink about 15 feet away. Can it go horizontal first then up? (about 3 feet
Answer:	Absolutely, yes. The total "head" of your installation is only 3 feet, which is much less than the rated 15-20 feet. Should have no problem.
Question:	Does it come with a built in check valve
Answer:	Mine at times just stays running,check valve works. I have taken it apart and cleaned it still randomly stays running,have to pull out power cord then it works

Product description

Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

From the Manufacturer

Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

• 1/30 hip high performance motor
• ABS tank, motor cover and volute
• 1/2 gallon tank capacity
• Stainless steel pump shaft
• Removable 3/8 inch barbed check valve

User questions & answers

Question:	I need a pump for my air bearing tone arm,does anyone know the output psi
Answer:	This is basically a transfer pump that won't develope higher pressure if you are concerned about psi.
Question:	If i plug it in so i still need to wire it for it to work
Answer:	Nope, no more wiring will be needed. All you will need to do is ensure the water line from the A/C is in place, and the output hose is in place. It will work just fine at that point. I actually have a hose from a dehumidifier into it, as well as the line from the A/C, and it works perfectly for me.
Question:	Do you know if this pump is 1.5 A 1 Phase
Answer:	Hello, Yes, it is 1.5 Amps FLA and 1 Phase. Thank you, PartsZone Supply
Question:	can the sensor be purchased separately
Answer:	I would expect that since this unit works so well, three years for me, that it would be better to replace the entire unit rather than try to replace a sensor.

• ◆【Mini EXQUISITE DESIGN CONDENSATE PUMP&PLUG CONNECTION】: Mini Split Automatic Condensation Drain Pump,Suitable for A/C 1-5HP（3700W） power,the flow rate & discharge head: 40l/h & 33ft. Plug Connection:connect brown live wire and blue neutral wire. Black is signal wire,needn't to connect
• ◆【SUPER QUIET & QUIET ENERGY-SAVING 】: This automatic condensate pump adopts 100-220V wide voltage design, 3w power and energy saving and environmental protection,it works so quiet,below 18 db,suitable for any indoor environment.No power consumption during standby
• ◆【APPLICATION RANGE】: Mini Split Automatic Condensate drain pump professional design for HVAC,Air Conditioner,Dehumidifier,Furnance,Ice Maker,other equipment where an automatic drain pump is required.condensate drain pump will not damage the original house decoration,simple and quick installation
• ◆【PROBE INDUCTION, AUTOMATIC EXCLUSION WATER】: The new probe induction technology was applied replace the original float induction,which avoids the abnormal drainage caused by the displacement of the float and the disappearance of magnetism
• ◆【 CONFIDENT WITH PRODUCTS QUALTY】: Any of your sincere feedback for condensate pump are welcomed.And we will try our best to solve it.Additionally,you also can choose REPLACEMENT TOOL or REFUNDING

User questions & answers

Question:	Doesn't works after 2 months, does it have a warranty
Answer:	Not sure
Question:	Will this fit in a PVC lineset cover along with the mini-split lines
Answer:	Although this pump is rather large, I was able to install it inside the elbow of a lineset cover. This pump was way too large to fit inside the head units themselves along with the wiring, lineset, and drain. It is VERY quiet though and works fine.
Question:	What is the outside dimensions for the unit
Answer:	The one posted in the picture is not the same one that I purchased. The one I bought was similar but did not end up working for what I needed it for, mostly because it did not have a power cord and needed to be hard wired
Question:	What size is the outlet hose / tube
Answer:	outlet hose length: 59 inch Hose inner diameter:0.24 inch Hose Outer diameter:0.35 inch Thanks for your great support on us.

Product features

FUJIWARA Condensate Pump, Small Automatic Condensation Drain Removal Pump, Floor Mode Mounted Pump

All automatic work

Automatic start, automatic drainage, automatic standby, no manual operation, safe and convenient

White Self-locking cable tie: fixed the hose

Plug Connection

Connect brown live wire and blue neutral wire. Black is signal wire, needn't to connect.

Mini pump is great for fitting in small spaces.

32ft High lift

Floor mode mounted condensate drain pump, Suitable for A/C 1-3HP (2200W) power, the head is 32ft. The 32ft lift effectively solves the problem of condensate drain out at most places.

A silent quiet pump

Small floor-mounted condensate drain pump, Low noise below 18 decibels when the pumps working.

Small exquisite design pump

Small pump Installed in your living room, bedroom, dining room or any indoor environment. No power consumption during standby.

Product description

This condensate pump is suitable for use with condensate from high efficiency condensing furnaces and boilers which produce acidic condensate. 22' of lift compared to the typical 20'. Integrating the CP22 into your system is easy. 1/4" inch quick connect terminals provide easy connection to the built in overflow switch. 2 terminals are provided allowing flexibility to connect air handler shutdown and optional alarm as needed. Features Metal Hang Tabs Shatterproof stainless steel hang tabs have design for easy mounting. Tabs are located on convenient 8" centers. Indicator Lights Red, yellow, and green indicator lights show the pump status. Green for power applied, yellow for pump running, and red for high level alarm. A Float That Floats A float manufactured from foamed polyethylene is a simple, chemical and environmentally resistant, long lasting float. Rather than mold a trapped air float from a material that sinks, or use an expanded polystyrene (EPS) float, the float simply floats. Four Inlet Holes Four inlets versus two or three on other pumps provide the greatest installation versatility. Inlet holes have a reinforced wall for increased durability. Rubber Feet Rubber feet dampen vibration which reduces noise. Vibration Isolation An elastomeric motor mounting gasket dampens vibration. Check Valve Removable check valve for easy cleaning.

• The product is highly durable
• Model Number: CP-22
• Item Package Dimension: 11.799999987964" L x 6.799999993064" W x 6.199999993676" H
• Item Package Weight: 5.1 lb

User questions & answers

Question:	Que tan ruidosa es la bomba
Answer:	Es muy silenciosa
Question:	Is the 3/8" discharge tubing included
Answer:	This discharge tubing is NOT included. However, it is a standardized part that can be easily obtained at your local hardware store. My tubing connected straight up with no thoughts coming from me. Great device!
Question:	Can I wire it direct
Answer:	It comes with a 3 prong plug but I guess if you want to cut it off and wire it in a box you could .
Question:	Does this device have the effect of actually drying the outgoing air or does it only pump out condensation
Answer:	This device takes the condensate from your HVAC device, coming from a drip pan, and pumps this condensate (water) out. This condensate can then be routed to a sink at a higher elevation. The outgoing air is dried out a bit, but the effect is secondary to its operation.

Product description

Designed for automatic Collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.

• 1 gallon collection tank
• Vertical centrifugal pump design
• Automatic start and stop operation
• 1/4” NPT x 3/8” barbed discharge adapter (for use with 3/8” I.D. Vinyl tubing)
• Two 1-1/8” diameter inlet openings

User questions & answers

Question:	Does the pump have a check valve
Answer:	No
Question:	It looks like the pictures on amazon are reversed for the two models offered one with safety switch one with out
Answer:	I got this product for my tankless hot water heater condensation buildup I would go with the safety on it it's a float inside the tank
Question:	What is the hight to the top of the 1 gallon tank where the inlets are
Answer:	5-11/16"

Product description

Little Giant's latest technology, VCMX Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCMX-20ULST features a 1/30 HP high performance motor with patent-pending cooling design to increases pump life. The oil-resistant tank and check valve eliminates the problem of cracked tanks with exposure to oil. The pump also features a 1/4 turn check valve which allows servicing without removal of tubing. This feature helps to eliminate water spills. This pump includes a mounting bracket for easy installation, a safety switch, a 6 foot power cord, and 20 feet of tubing. The pump's rubber feet absorb vibration on hard surface installations and its slimmer footprint size offers flexibility in tight spaces. The VCMX-20ULST pumps 84 GPH at a discharge head of one foot.

• 1/30 hp high performance motor
• Fully automatic: start, stop, safety switch
• Check valve outlet: 3/8" (9.5 mm), for 3/8" (9.5 mm) ID
• CCSAus listed
• Options: safety switch, 20 ft (6 m) of 3/8" (9.5 mm) tubing, and anti-sweat sleeve

User questions & answers

Question:	I have an overflow pan for my central a/c unit. Can this pump sit in the pan to drain if the pan becomes full or does it eliminate the pan by pumping directly from the a/c. Have already had one ceiling lick because of a clogged drain line. Thanks for any info
Answer:	The pump replace the pan and has an automatic shut off that can be connected to heat/air system to shut it down so humidifier and airconditioner are also shut off if pump fails. The pump can be set up to pump to drain or sink.
Question:	My pump has stopped working, can I temporarily use just a hose that drains the water until I get another pump, or will that harm my furnace
Answer:	You may want a pro to check out what you have but I would not risk water damage inside a house or damage to the furnace.
Question:	What does the safety switch do
Answer:	Per the manufacturer: http://www.franklin-electric.com/media/documents/995641.pdf**Some models equipped with external, float activated switchfor automatic high level water detection(safety overflow switch)**For models with safety overflow switch: dual function NOand NC operation (set to NO from factory for equipmentshut down connection)**Models equipped with safety overflow switch includetwo 5" switch lead wires
Question:	does the pump fits in a dehumidifiers trays
Answer:	it is not made to be inside a dehumidifier tray. you will need to rub a tube or garden hose from the drain on the humidifier drain tub to the hole on top of the pump. then it will pump the water out from the pump holding tank.

Product description

1/12 hip automatic condensate pump with 3 intake holes, 3/8 inch outlet; replicable check valve; suitable for sitting on the floor or mounting on a wall; up to 100 mph.

• Designed for removal of condensate from furnaces, air conditioners, dehumidifiers and other types of equipment
• Safety switch to automatically shut down equipment in case of power failure
• High impact thermoplastic tank
• Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information
• Click on the Water Ace products link at the top of this page to see more pump options from Water Ace products

User questions & answers

Question:	what is the volume
Answer:	I sent it back.
Question:	How much heat can this handle? I need to use something to pump the extra water from a steam generator
Answer:	Returned to amazon.
Question:	How many feet will this pump be effective? I need to pump to 40 feet from the pump
Answer:	I sent it back
Question:	How many feet will this pump be effective? I need to pump to 40 feet from the pump
Answer:	It pumps up 12 ft on m system

Product features

Full Line of Dependable Water Pumps

WaterAce produces quality water pumps for all of your residential needs. From sump pumps for flooded basements to deep well water pumps and everything in between, WaterAce has you covered. Click on the WaterAce link at the top of this page to shop our Amazon Brand Store.

Product description

Little Giant VCC-20ULS If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST.

From the Manufacturer

Little Giant VCC Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCC-20ULS features a stainless steel pump shaft, a removable 3/8 inch barbed check valve, a 6 foot power cord, a safety switch, and a 1/30 horsepower high performance motor (115 V). It is designed for low profile limited space applications. The VCC-20ULS also features an ABS tank, ABS motor cover, and ABS volute.

• Flow: 80 GPH at 1' lift
• Voltage: 115
• Shut Off: 20 feet
• Thermal overload protection
• UL / CSA listed

User questions & answers

Question:	What is the height from the bottom to the inlet openings
Answer:	1- 3/4"
Question:	I have portable a/c with drain plug 1 1/2 inches above floor. will this pump work without raising the a/c higher off the floor
Answer:	I faced this very same issue when we got our portable A/C unit. I solved it by placing the A/C unit on small pieces of 2x4 blocks. This added height also is helpful when the carpet is being vac'd. The hoover can get under the A/C a bit more. Also I have placed the pump unit in a cheap metal cake pan. If any water leaks for any reason, this cake pan is cheap insurance.
Question:	Do I have to hook up the safety switch? I already have a wet switch otherwise wired
Answer:	It's two wires coming out of the unit that when submerged shut the unit off, there is nothing to hook up.
Question:	Does anyone know the height of the water (depth I guess) that will turn on and off the automatic pump? Looks like say an inch to half an inch
Answer:	Measured my unit: On at 1 inch. OFF at 1/2 inch. Pump motor is very quiet & moves the water!

Product description

The Beckett CB151UL Medium Condensate Removal Pump is a genuine OEM (original equipment manufacturer) replacement part designed to work with a variety of Beckett products. This pump is user-friendly with a patented airflow design that pumps quietly and reduces the amount of heat generated. The design also increases the life, quality and reliability of the pump. The CB151UL has an increased pump drink and a dual-float design for less frequent pump operation and maximum safety. A strong 115-volt motor and flow rate of 120 gallons per hour enables this pump to pass medium-sized particles with ease. The Beckett CB151UL Medium Condensate Removal Pump has a modern design, comes with a 6-foot cord set and can be mounted from either side. Use genuine OEM parts for safety, reliability and performance. Beckett is an industry leader in condensate water removal with a complete line of pumps for heating, air conditioning and refrigeration. Beckett also produces a line of products for water gardening with a variety of garden accents and accessories. All of Beckett’s pumps are designed for high reliability, efficiency and easy installation.

From the Manufacturer

CB151UL, 115 VOLT CONDENSATE PUMP. Beckett Genuine OEM replacement part. Beckett is an industry leader in the food equipment industry. Use genuine OEM parts for safety reliability and performance.

• Genuine OEM replacement part
• Beckett is an industry leader in the food equipment industry
• Uses OEM parts for safety, reliability, and performance
• Approved by original equipment manufacturer (OEM)
• Not intended for anything other than specified designed usage

User questions & answers

Question:	Has anyone pulled one of these open to see what the motor shaft/impeller connnection is like ? i'm replacing a beckett cu-14-1 that had a press fit
Answer:	I pried the pump off the motor shaft. It is just a friction fit. The pump and check valve are an integral unit, so that the check valve is difficult to clean and is NOT replaceable. I devised a method with a garden hose to squirt hot water through the pump and out the check valve. My unit is 18 years old. I will put vinegar in the unit for over the Winter (or completely empty it) in the future.
Question:	Will this pump water up 8' to the ceiling area and then 40' across to a drain
Answer:	Ours travels about 8' up and then about 20' across to drain outdoors. I'll bet 40' would work fine, but I haven't tried it.
Question:	Where is this pump manufactured
Answer:	I believe the pump was manufactured by the Beckett Corporation in Irving, Texas. You can verify this by either calling them at 1-888-232-5388 or sending them an email at www.beckettpumps.com.PG
Question:	Does this model have a safety shut-off switch included? Description does not say, and picture does not show one
Answer:	Yes, it does - a two-wire ("pig tail" type) connection. Apparently not shown in the picture.

Product features

Beckett CB151UL 115-Volt Condensate Pump

Beckett's family of medium condensate pumps are designed to not only meet but exceed your toughest job demands. This generation of pumps is engineered to be user friendly, and the patented airflow design allows for quiet pump operation and heat reduction to improve the life, quality, and reliability of the pump. The strength of the motor enables the pump to easily pass medium-sized particulate and includes a 6’ cord set. This modern design meets the highest quality standards that Beckett strives to provide for its customers. The pump is rated 115V 60 Hz with a max lit of 17’ with a flow rate of 120 gph at 1’.

Product description

1/12 hip automatic condensate pump with 3 intake holes, 3/8 inch outlet; replicable check valve; suitable for sitting on the floor or mounting on a wall; up to 100 mph.

• Designed for removal of condensate from furnaces, air conditioners, dehumidifiers and other types of equipment
• Safety switch to automatically shut down equipment in case of power failure
• High impact thermoplastic tank
• Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information
• Click on the ECO-FLO Products link at the top of this page to see more pump options from ECO-FLO Products

User questions & answers

Question:	does the pump have automatic re-start in the event of a power outage
Answer:	Yes. This is how it works. There are two float switches inside the tank. One controls the pump by floating up as the water level rises. When it reaches the end of its travel it completes an electrical circuit and the pump turns on to empty the tank. If the pump does not activate for whatever reason the second float switch will complete its travel as the water continues to rise and then disconnect a relay switch which is connected to the wires that will need to be spliced into the power cord of whatever device you are running(ac or dehumidifier). This relay switch interrupts the power to the device (such as a dehumidifier or ac unit). That being said if the device(dehumidifier or ac)does not have a feature allowing it turn back on automatically after power loss then it will remain off until you physically turn it back on. So as long as the ac or dehumidifier or whatever you're running can turn back on by itself once it gets power again then yes it will turn back on. If not then I don't think any of the condensation pumps will work for you as they all seem to operate basically the same way.
Question:	Would this work to pump the water out from the dehumidifier
Answer:	Yes that’s what I bought mine for.
Question:	If parts are needed for this item are they available
Answer:	Yes, Replacement Parts are Available
Question:	Can this be used in a basement and pup up 6 plus feet and out a window from a dehumidifier? do you just put it inside the dehumidifier tank
Answer:	That's just what it is used for and you don't put it inside the tank as that would ruin the pump. Just run your discharge hose directly from the dehumidifier into the pump unit and it will automatically pump from their as it fills

Product features

Utility Pumps

Utility pumps are used to transfer water from one source to another or to drain water from surfaces. Many of them are designed to drain water as close as 1/8" from the surface. Water being transferred may have some solids in the water, but they cannot be larger than 1/8'. They are typically used for draining water from sinks or tubs with clogged drains, emptying pools or spas, draining excess water on flooded basement floors, etc.

Utility pumps are either portable or submersible. Portable means they are designed to operate outside the water with a hose placed in the water. Submersible means they are designed to be submersed in water. Submersible pumps can be provided with no on/off switch, which means they are manually operated or have a 'smart' switch that will detect the absence of water and will therefore shut off the pump automatically.

Since most utility pumps are made of plastic and rubber components, running them dry (running them without water circulating in them), will result in the pump overheating and melting the plastic and rubber components. As a result, it is required that you physically monitor pumps provided without switches so you can unplug them when the task is complete.

Product description

Specification: Voltage: 115 V Horsepower: 1/150 HP Overall Dimension: 6.3 x 6.1 x 4.3 inches Item Weight: 4 pounds The little giant pump is designed for in-pan placement, the 1-ABS shallow pan pump offers next generation technology for air conditioner condensate removal. Totally submersible pump with built-in, advanced mechanical switch that automatically triggers operation when condensate in the pan or reservoir reaches a preset level. Automatic shutoff occurs when the condensate level drops. Low weight, compact size, high lift and quiet operation make the Little Giant line of ABS pumps perfect for in-pan condensate and other wastewater removal.

• Shallow-pan tank style designed for in-pan mounting
• Bottom intake with 10 ft. maximum lift
• Stainless steel shaft
• 6 ft. power cord with 3-prong molded plug
• Integral float-activated switch and thermal overload protection

User questions & answers

Question:	Can this pump recirculate water from one location to another
Answer:	This pump isn't designed to recirculate. It utilizes a float switch, thus it's designed to empty a shallow reservoir and shut off. It's certainly capable of recirculating in the right conditions, but remember it's only rated at 205 GPH- not powerful by any standards.
Question:	how hight can Lyft en feet
Answer:	The specs say 10 feet, but at that height the pressure is minimal. Better at 8’ even better at 5.
Question:	what is the minimum water depth it will pump down to
Answer:	About 1/4". I've used mine since early summer, and it comes on every day at least once. It pumps 5 gallons of water in NO time.
Question:	what is the mimimum water depth this pump has to sit in? Can it sit dry and still work
Answer:	It can sit dry forever, so if your condensate pan evaporates, no problem. It triggers “on” at about 1” depth, and “off” at about 1 1/2” depth. I’ve had two of them for over 20 years and they still work fine. Use a check valve if you’re pumping to any height otherwise the water runs back on shutoff so the pump has to run much more often.

Product description

Diversitech is North America's largest manufacturer of equipment pads and a leading manufacturer and supplier of components to the HVACR industry.

User questions & answers

Question:	Does this pump have a 1" hole and a 3/4 ' hole
Answer:	It has 4 (1") holes in each corner and you can easily fit a 3/4 pipe.
Question:	Hello all Can you mount this unit on the side of the furnace
Answer:	You could but I would not recommend that. If you need to mount it off the floor then I would recommend a wall. 9 times out of 10 it's on the floor.
Question:	I have a need to pump condensation straight up about 10ft before it makes a 90 degree turn to a drain. Will this pump handle it
Answer:	It works for us. We have condensation removed from our combo water heater and it in the basement. I'm not 100% sure if it is 10 foot, but it is at least 9 foot, with two 90 degree bends. Our drain comes off the combo heater about 4 feet above the floor, where the Diversitech pump is located and then the outlet pipe goes up about 9 feet and then up through the ceiling and out to the exterior. 'If' we did have a pressure head problem, then I would raise the pump ABOVE the floor and put it on a small table or shelf 2 or three feet above. {Future tip ....It works...... except after 10 or so years when it fails you will find a puddle after the reservoir fills up. I suggest that you put it in a container. Hope this helps?
Question:	I only need the floatless sensor for a clearvue mini pump.......can this be purchased separately
Answer:	I am just a customer of this company. However, I doubt that you could buy just the float and even then I doubt it would easily fit some other pump. There are other float sensors sold on Amazon that could be adapted with some effort (I have done this with other pump situations but takes a fair amount of electrical/electronic knowledge). I understand the want for a floatless sensor since these condensate pumps get gunked up (although the motors of cheap pumps fail before the sensor). I have replaced a couple of OEM pumps with this unit. It's more expensive but worth the cost since it is excellent. If you have AC and a high efficiency gas furnace, your condensate pump runs 7x24 12 months a year. When a pump fails, you can have a super mess and water damage if they did not install the cutoff sw properly (rare and never tested). This is particularly critical where the HVAC unit is in the attic! I have two friends who didn't know that their pump failed until they had water damage. This pump does not depend on the external overflow sw, and has it's own which can sound an alarm.

Product features

This new pump can provide up to 22ft of lift if needed. ClearVue runs at the minimum speed needed, saving wear on the pump. The pump selects the lowest effective speed, making it quieter than a regular pump. Its unique self-cleaning feature senses problems and automatically enters a self-cleaning mode using condensate water to fix the issue. The ClearVue pump features a clear bottom tank to easily check the water level. Other features include: stainless steel mounting tabs, silicone rubber feet, reversible deck, four inlet holes, and LED indicator lights. ETL Listed File Number 3190890.