11 best us general tool chests

Product description

Keep the tools you need for the job organized and easily accessible with this all-steel roller cart. This mobile cart provides 6200 cu. in. of storage space and handles up to 580 lb. worth of equipment. Features include four smooth rolling swivel casters for easy maneuverability around your work area and a glossy black powder coat finish to prevent rusting. A great tool cart for any garage or workshop! *Casters - 2 swivel, 2 locking swivel *Material - Steel *Product Height 38-1/4 in. *Product Length 33-1/2 in. *Product Width 17-1/2 in. *Product Weight 96 lb.

• 14-1/2 in. deep drawers have folded edges with extra strong detents to secure drawers when closing
• Narrow drawer width (x2): 12-1/4 in. - Wide drawer width (x2): 26 in.
• Heavy duty 1-3/8 in. ball-bearing drawer slides are riveted to the cart for smooth & durable use
• Drawers support up to 70 lbs per drawer
• Screwdriver storage slots are built into the inner frame of the tool cart

User questions & answers

Question:	How deep vertically is the top storage area
Answer:	Not as deep as the 5 drawer units. I have screw and nut drivers that the handles are taller then the lid so you can’t close it if your using the holes as storage. I will get an actual measurement for you tomorrow.
Question:	How is the assembly
Answer:	NOTE that there are short bolts and longer bolts; they MUST go in their appropriate locations, so pay particular attention when you insert a bolt and make sure it is either a short or long one, whichever is called for. Other than that, assembly is fairly easy.
Question:	How deep are the drawers
Answer:	14.5 inches
Question:	How many keys does this come with
Answer:	2 keys

Product description

Keep the tools you need for the job organized and easily accessible with this all-steel roller cart. This mobile cart provides 12,600 cu. in. of storage space and handles up to 580 Lb. worth of equipment. Features include four smooth rolling casters for easy maneuverability around your work area and a glossy powder coat finish to prevent rusting.

• High capacity, full extension ball bearing drawer slides
• All steel construction- Industrial powder coated finish resists rust
• Secure detents keep drawers closed
• 5 in. casters, two fixed and two locking swivel
• Non-slip pre-cut drawer liners in all drawers and compartments

User questions & answers

Question:	Do the drawers lock
Answer:	The sockets are 1 3/8" deep.
Question:	Where do I get some touch-up paint or a spray can to match
Answer:	Scratching of the bolts is not an issue. They are cheaply replaced with no issues readily available. The wheels are not as disposable. Lugs are bolts and thus like any bolts need direct contact with metal tools to tighten and loosen. Otherwise it will never be tight or be stripped from the padding defeating the purpose of "protecting" them.

Product description

Here's an industrial grade U.S. General Series 2 5-drawer Mechanic’s Cart that doubles as rolling workstation with a built-in toolbox and five drawers. With quality features like rolled drawer edges, 90° gas struts on the lid and spring-loaded drawer latches to hold drawers shut, this cart is ideal for the master mechanic. Store over 15,000 cu. in. and 700 lbs. worth of equipment. Four smooth heavy duty swivel casters provide easy movement around your work area. The durable glossy powder coat finish prevents rusting and looks great. Five drawers and large top compartment make this heavy duty service cart a rolling workstation High capacity, full extension ball bearing drawer slides All-steel construction Industrial powder coated finish resists rust Secure latch retention system keeps drawers closed 5 in. casters, two fixed and two locking swivel Non-slip pre-cut drawer liners in all drawers and compartments Barrel lock keeps your tools safe and secure 90 degree lid opening with dual gas struts An additional lift-gate charge may apply. Folding side tray sold separately.

User questions & answers

Question:	This one is $150 more than what HF sells. Is this one much better
Answer:	This IS the cart HF sells for $239 (often on sale for $199). Go to your local Harbor Freight store.....

Product description

Your tools deserve the best in storage. Boasting a durable steel construction, foam-lined drawers, and 10 storage compartments, this tool chest and storage cabinet offers the ultimate solution to messy garages and disorganized workshops. This unit features a stackable design that lets you use the tool chest and storage cabinet separate or together. Find the tools you need, without the hassle. SPECIFICATIONS: Whole Tool Box Dimensions: 23.5”(L) x 13”(W) x 42.5”(H); Top Tool Box: 23.5”(L) x 10.5”(W) x 13.5”(H); Bottom Storage Box: 24”(L) x 13”(W) x 29.5”(H); Top Open-Latch Drawer: 23”(L) x 10”(W) x 2.25”(H); Small Drawer : 7”(L) x 9.5”(W) x 1.5”(H); Tray Drawer : 21”(L) x 9.5”(W) x 1.5”(H); Large Drawer : 21”(L) x 9.75”(W) x 3.5”(H); XL Bottom Cabinet: 21”(L) x 13”(W) x 15”(H); Handle Length: 13”; Total Weight Capacity: 295 lbs.; Weight Capacity of Each Drawer: 30 lbs.; Weight (Combined Units): 57.5 lbs.; Color: Red; Material: Steel; Some assembly required (with instructions)

• Multiple storage drawers: equipped with top box drawer, small drawers, trays, large drawers, & big bottom cabinet
• Secure and safe: drawers and trays lined with a foam material mat Perfect for absorbing oils; top unit comes with lock and keys for extra security
• Multi-functional: tool chest & cabinet come in 2 pieces to allow you to use them separately or together
• Solid construction: Crafted with durable steel and complete with Omni-directional casters and a side handle for easy movement
• Combined Tool Box Dimensions: 23. 5”(L) x 13”(W) x 42. 5”(H); Total Weight Capacity: 295 lbs.

User questions & answers

Question:	How do you get the chest out?? i am following directions but it will not come out of the bottom part of the chest help
Answer:	You do not understand, the bottom does not come out of these opens up like a door
Question:	Is it possible to remove the wheels in order to have a flat bottom? I want to sit the unit on an existing tool bench
Answer:	Yes, it doesn't come with wheels on it. They can be put on, or not.
Question:	How do you put the bottom door on
Answer:	There are two tabs in front under the bottom drawer, those tabs should be facing up. Bend the tabs so their straight. Slide the door on the track that holds the door. Bend the tabs back up so their at 90 degrees, this holds the door in place when you have it closed. My door came attached, so I didn't have to do what you have to do to keep it in place. However, what I just described, should solve your problem. If you have any other questions, you can ask any time. My email [email protected] luck Amanda, I hope solved your problem.
Question:	Two different pictures shown on ad for top box. Are there 3 long drawers or 12 small drawers on thr top box? If posible a picture with drawers open
Answer:	I got it ! The pictures have the top section drawer frame on when it is locked so it looks like 12 drawers when the top box is unlocked 3 small drawers on top and full size drawers below. So disregard the posting on inconsistent pictures. It's just hard to visualize. A better picture with the frame half ways open would of made it easier to visualize it.

Product description

This drawer organizer set contains three separate trays that can be used individually for smaller drawers or combined to fit larger drawers. Each tray in the drawer organizer is the same size but offers different numbers and combinations of compartments: one tray with two large compartments, one tray with four medium compartments and one tray with eight small compartments. The drawer organizer set is perfect for storing different types of items, ranging in size from hand tools to screws.

User questions & answers

Question:	How deep are the trays
Answer:	2 3/8 Deep
Question:	What are the dimensions
Answer:	15.8 x 7.2 x 2.4 inches
Question:	Tienen ruedas para caja de herramientas us general
Answer:	No
Question:	Why so pricey? This exact model is $5.99 at harbor freight
Answer:	This item is considered "oversized" for shipping, it costs between $12 and $14 to ship within the US. Thanks for asking!
Question:	Very interested for my travel set. Wondering if you have a snap on lid to keep stuff from jumping out. Please let me know
Answer:	No this does'nt have a lid.
Question:	What is the actual height? at the top of the amazon page it says 1 1/2" h. if you click the link for "see more product details" it says 2" h
Answer:	Yes it is 1 1/2" tall, it fits my top chest smaller drawers
Question:	What material is this made from
Answer:	PLASTIC

Product description

Three storage choices in this heavy-duty, all-steel, utility tool cart make it a convenient "rolling workstation" for all your tools. The sturdy tool storage cart can hold up to 704 lb. of tools, yet you can easily roll it to your work area so you'll have everything you need within reach. Super-strong, 14-gauge steel construction has a powder-coated enamel finish that resists rust. All drawers have ball-bearing rails for smooth opening. Industrial quality all-steel construction Heavy duty ball bearings on all drawers for easy opening Glossy powder-coated finish and treated fasteners resist rust Lockable drawer with keys Dual gas struts hold lid open Spring-loaded latches keep drawers closed Two fixed and two locking swivel casters Color Red Drawers (qty.) 5 Material Steel Maximum Working load (lbs.) 704 lb. Number of drawers 5 Fits tire size (in.) 5 in. Product Height 41-2/5 in. Product Length 37-3/4 in. Product Weight 120 lbs. Product Width 20-3/4 in. Size(s) 30 in.

• Truckin’ Magazine 2014 WINNER - Best Mechanic’s Tool Cart
• Industrial quality all-steel construction
• Heavy duty ball bearings on all drawers for easy opening
• Glossy powder-coated finish and treated fasteners resist rust
• Lockable drawer with keys

User questions & answers

Question:	If it is not made in the U.S. then where is it made
Answer:	Probably china, but I thought it was
Question:	Do you think it would be possible to get this down 1 step without tipping? I need to clear a 10" step from outside to inside. Is handle well secured
Answer:	I WOULD THINK SO , SLOW AND EASY AND YOU SHOULD NOT HAVE ANY TROUBLES
Question:	How many screw drivers can it hold in the holes in the chest under the lid
Answer:	There's 11 holes on each side under the lid. Total of 22.
Question:	does the height include the casters
Answer:	Yes it does

Product description

Store and transport up to 2633 lb. of tools and other equipment Similar cabinets sell nationwide for hundreds more! 13 - Visit Harbor Freight Tools For More Information.

• Rugged all-steel construction with precision welding
• Industrial high-gloss powder coat finish
• Heavy duty ball bearings for smooth sliding drawers
• Easy-lift spring loaded latch keeps drawers closed until released
• Industrial 5" casters with rubber tires roll easily under heavy loads;

User questions & answers

Question:	Where is it made
Answer:	China but they are sturdy and well made
Question:	Is there any locks and keys available? I recently lost my keys and I can't lock my tool box
Answer:	1-888-866-5797 , US General, PO box 6009, Camarillo Ca 93011 is the # and adress for company. This should help. Call them with # on lock and model # of tool box. Hope this helps.
Question:	Does the lock keep all of the drawers locked, or just the first couple of them
Answer:	Will lock all drawers.
Question:	Isnt this the same box you can get at Harbor freight for
Answer:	Yes it is the same roller cabinet you can purchase @ Harbor Freight. I paid $399.99 early black Friday, with $100.00 off coupon …..11/27/2019, that's why you don't use amazon to purchase anything. That's why they are Billionaires...Buy Direct,,

Product description

Here's an industrial grade U.S. General Series 2 5-drawer Mechanic’s Cart that doubles as rolling workstation with a built-in toolbox and five drawers. With quality features like rolled drawer edges, 90° gas struts on the lid and spring-loaded drawer latches to hold drawers shut, this cart is ideal for the master mechanic. Store over 15,000 cu. in. and 700 lbs. worth of equipment. Four smooth heavy duty swivel casters provide easy movement around your work area. The durable glossy powder coat finish prevents rusting and looks great. Five drawers and large top compartment make this heavy duty service cart a rolling workstation High capacity, full extension ball bearing drawer slides All-steel construction Industrial powder coated finish resists rust Secure latch retention system keeps drawers closed 5 in. casters, two fixed and two locking swivel Non-slip pre-cut drawer liners in all drawers and compartments Barrel lock keeps your tools safe and secure 90 degree lid opening with dual gas struts An additional lift-gate charge may apply. Folding side tray sold separately.

User questions & answers

Question:	Doesn’t Harbor Freight have these for $239.00 24/7 365 and on sale for $199.00 right now
Answer:	I asked the same thing lol just orderd one from harbor freight.

Product description

A tried and true classic—the Ernst Wrench Organizer Tray is designed for a standard set of 16 wrenches. An easy fit for most sizes. Great for storage in the box or on the wall. Can be installed with double sided or magnetic tape. Fuel and solvent resistant. Made in the USA. Lifetime guarantee. Tools not included.

• Standard solid plastic wrench organizer tray
• Designed for a standard set of 16 wrenches
• Great for storage in the toolbox or on the wall; measures 12.2 x 7.5 x 1.5 inches (L x W x H)
• Can be installed with double sided or magnetic tape (not included)
• Made in the USA; lifetime guarantee; tools not included

User questions & answers

Question:	Is it metal or plastic
Answer:	plastic ... metal would mar your tools.
Question:	Can I hang this from my peg board vertically
Answer:	Yes, it has two keyhole slots at the top/wide end.
Question:	What are the dimensions of this holder
Answer:	12" long, 2 1/2" wide at it's lowest point, 7 1/2" wide at it's highest point
Question:	will this hold 1 1/4 wrench
Answer:	My spanners (wrenches) go from 7mm to 22mm, which fit nicely using this holder. 1 1/4 inch is about 30mm... I think would be a bit too big for this one.
Question:	Are the listed dimensions accurate, and is the width dimension with or without handles
Answer:	I have the width as 71.7" without the handles. It's another 1.5" with handles. The depth is 21.7" (without lid handle) and the height is 20.7". So I would say they are quite accurate relative to the Amazon specs. Obviously the 72"width is the sell sheet nominal.
Question:	What is the difference between the h2pro and the rs pro
Answer:	The same quality the price is cheaper
Question:	Is this for a top or bottom box? The description and pictures conflict
Answer:	This is a bottom box you can put a top box on.
Question:	Can i make payments
Answer:	Homak website or call manufacturer. Great company to deal with and very responsive.

Product features

About Homak Manufacturing

Homak Manufacturing was founded in 1947 in Chicago by Sigmund H. Danziger. The name 'Homak' was coined after a sign that Sigmund saw on a hat store. Originally a manufacturer of steel kitchen cabinets, Homak Expanded its product offerings in the 1960s to included a separate line of hardware products such as toolboxes, tool cabinets, and other accessories.

Homak emphasizes tool storage and gun cabinet security. The full product line consists of hand-carry toolboxes, tool bags, parts organizers, tool storage cabinets, workbenches, garage furniture, safety cabinets, spill containment systems, P.B & E. products, steel lockers, gun cabinets, fire-resistant safes, ammo storage boxes and accessories. Each item is manufactured to exceed customer's expectations, and to provide strength and dependability to the customer.

Ernst Manufacturing Standard Wrench Organizer, 16 Tool,

Our Wrench Organizer Tray is ideal for toolbox storage. Wrenches are lined up and easily accessible. Simply pick tools and place them back without resistance. Perfect when working in any garage environment. Fuel and solvent resistant. Holds up to 16 wrenches.

Specifications:

Dimensions: 12.3"x7.5"x1.5" Weight: .300 lbs.

Product description

This sturdy 6 compartment drawer organizer tray is ideal for storing tools, nails, screws, tackle and any other small parts. The drawer organizer fits our 13 drawer industrial quality roller tool chest, without any wasted drawer space. Keep small tools and parts organized and unclutter your drawers.

• Country Of Origin: China
• Model Number: 99729
• Item Package Dimension: 21.99999997756" L x 10.299999989494" W x 1.99999999796" H
• Item Package Weight: 1.15081300764 lb

• 【High-quality Material and Paint】Made of high-quality cold rolled steel, this tool cabinet can be more durable comparing to others made of common materials. And it is painted with glossy anti-rust and corrosion-resistant paint, which can be used both indoors and outdoors. And because of this feature, it is also very easy for you to clean.
• 【Large Storage Capacity】This tool box equipped with 4 small drawers, 2 large drawers, 2 trays and 1 big bottom cabinet. Different size of drawers could suit for different tools, which allows you to store all kinds of tools.
• 【Detachable Box】The design of this tool box is creative. The whole storage cabinet could be detached into 2 boxes, which allows you can use them separately or together according to your requirement.
• 【Lockable Drawers】The top chest drawers are secured by a keyed external locking system to protect your tools from being stolen and ensure your tool safe. And with the steel construction, which makes the cabinet more stable.
• 【Easy to Move】It features four swivel casters that allow quick and easy movement, and with two brakes help keep your tool cabinet in place. Besides, there is a handle on the side of the tool cabinet for convenient control the rolling cabinet.

User questions & answers

Question:	Can anyone tell me what the height of the bottom box alone is? Need something that will fit beneath my workbench
Answer:	29 and 3/16 inches tall (with wheels installed)
Question:	what are the dimensions of the tool box fully put together
Answer:	About 42” tall, 21” wide and 13” deep
Question:	Does this tip over fairly easily
Answer:	It’s surprisingly very sturdy! I’ve got mine stuffed with socket sets, hammers, and everything in between. And it doesn’t want to tip over, even with all drawers open.
Question:	I need to be able to connect the adapter on the pump to 1/4" npt fittings. is there an adapter i can use
Answer:	William : Take your pump in hand to your closest auto parts store , they should have exactly what you need .Best Regards - Gerry