8 best mitre saw

Product description

The DW715 12 in. Single-Bevel Compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.

• Power and durability: 15 amp, 4,000 Rpm motor
• Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
• Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
• Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

User questions & answers

Question:	Is the current model that is shipping type 1 or type 20. If you look up the parts diagram the type 20 has a different slide mechanism part number
Answer:	I bought a new one today from a lumberyard and it is a Type 1. (says right on the sticker on the motor) Not sure if that means the slide mechanism is better or worse than the Type 20. I would assume it was made in 2014 because there is a "Dewalt use only" tag on the box which starts with 2014. Not sure if a "fresher" saw is a Type 20
Question:	Can xps be added, i know dewalt makes a kit to add it to some saws, but this model was not listed
Answer:	mmToolparts actually sells a kit (3 proprietary DeWalt parts + their wiring harness) for less than $70. They have videos on their website that show how to install the parts on DW716, DWS779, and DWS782 saws. You will need some additional tools (torx screw drivers or torx bits, wire strippers/cutter/crimper) and somewhat mechanically inclined. Just google "DWS779 xps light kit" and they should be the top result. This might be an easier option versus going to a DeWalt service center in the post pandemic world.
Question:	Does this miter saw come with a laser or any guiding system
Answer:	It does not come with any laser for guidance. You may find my answer a bit crude, I've been using miter saws for many years and the best guiding system I found to work is my/your eyes. Having lasers or no lasers you still need to use your eyes to get the work piece spot on near the cutoff point. Hope this helps!
Question:	Is there an LED cut line
Answer:	You can add the LED light to this saw. Not a laser but a shadow light that show exactly where the saw blade will cut. I just did it last night. Parts can be had for about $70. This basically turns it into a model 780 which is much more expensive. Pretty simple to add.

Product description

The Metabo HPT C10FCGS 10-inch Compound Miter Saw is lightweight for easier transport. The 15 amp motor generates a no-load speed of up to 5000 RPM for making crosscuts and miter cuts with ease. This miter saw offers a bevel range of 0-45 degrees to the left to provide clean and accurate bevel cuts. It is designed for woodworkers who demand precision, reliability and versatility on the job.

• 10" Compound Miter Saw
• MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
• LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
• MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
• BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
• LARGE TABLE: Offers better material support with vice clamping system to secure work piece
• THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

User questions & answers

Question:	Does this take any 10” blade
Answer:	Yes, it will take any 10" blade with a 5/8" arbor.
Question:	does this come ready to use or is assembly required
Answer:	Hi there, there is a small amount of assembly required. Please refer to the owner's manual for setup instructions. Hope this helps!
Question:	Is the depth of cut adjustable
Answer:	Depth can't be adjusted on this model number. You will need a sliding compound miter saw.
Question:	According to the instruction manual, the item includes a 10mm box wrench to tighten the nylon nut M6 for the sub fence installation. I used my own too
Answer:	Yes, but using yours is fine. Theirs is included simply for convenience if you didn't have one.

Product features

45 Degree Bevel Range

To the left to provide clean and accurate bevel cuts

Horizontal handle

For a secure hold

15 Amp motor

Delivers high power for the toughest cutting jobs

Large table

for better material support with vice clamping system to secure work piece

Product description

You'll find saws for multiple applications. Select from 15 in. And 20 in. Hand saws, a 10 in. Fine-finish hand saw for cutting wood, plastic, and laminate, 12 in. Hacksaw, and for those precision cuts, an adjustable Miter box and clamping Miter box both complete with saws.

• Cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts
• Cuts mitres on 45° and 90° angles, face angle 45° and 22.5&Deg; angle for octagonal shapes
• Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box
• Molded-in storage bins to hold CAM pins and pencil
• 1 Year Limited Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	Is this good for coping baseboards
Answer:	Dear Customer, it only use for 110v(US voltage). Thank you.
Question:	Will this cut PVC pipe
Answer:	None that I know.off. And they dont offer to see you a backup battery by itself
Question:	can this cut 30 degree angles
Answer:	https://www.amazon.com/dp/B07PWBVQX2 It's where I found one.
Question:	What is the TPI for the saw cutting blade
Answer:	Dear Customer, So sorry for this misunderstanding. This package includes one charger and one battery. 5 Batteries in list means 5 electric cell. We will update our description to avoid this misunderstanding happening again. Thank you so much for your support. Regards, Hawkforce Customer Service Team

• Multi-Material - Premium Japanese tungsten carbide tipped (TCT) blade included cuts wood, steel, aluminum, wood with embedded nails, plastic & more!
• Powerful – 15A Motor optimised gearbox and blade system, increases motor and blade life to cut through a variety of materials with ease
• Accurate - Precision cutting with laser guidance, trench cut facility, 11-13/16" slide, 0˚ - 45˚ double bevel and 50° - 50° mitre settings, covers all common cutting angles
• Features - Large 11-13/16" x 3-1/2" cutting capacity, ergonomic horizontal trigger with comfortable grip, integrated carry handles for easy transportation and 13ft cable

User questions & answers

Question:	Will this cut 4x4 tubing
Answer:	No it isn't, separate on/off switch for the laser and the saw.
Question:	Will this work cutting bevels in steel plate
Answer:	Mine lives in a horizontal position on a dewalt "dolly style" stand between uses and I've never had any problems. Everything is very sturdy and pretty rugged. You should be fine.
Question:	What is the rpm
Answer:	About 4 ft
Question:	Will this cut 304 stainless steel tubing .188" wall
Answer:	You can cut max of 16 inches to be safe what I love about this saw is versatile for any carpenter and is light weigh

Product features

Powerful 15A Motor

The Powerful 15A hi-torque motor with optimized gearbox & blade system allows you to cut through up to 1/8" mild steel

45° - +45° Dual Bevel Tilt

Save time & hassle flipping your workpiece to get your bevelled finish. The R255SMS-DB+'s dual bevel capability has it covered!

50° - 50° Miter Cuts

With a miter cutting capability of 50°, get the angled finish you require every time by using the base detents

Laser Guided Accuracy

Ensure the perfect angle & finish on your next woodworking project with laser-guided precision for assisted straight-line cutting

Premium TCT Blade

The R255SMS+ includes a Premium Japanese Tungsten-Carbide-Tipped blade with more teeth for a cleaner cut

Taller Neck & Fence

The extended neck and fence on the R255SMS-DB+ increases the cutting capacity and the size of workpiece that you can cut

Quick Release Clamp

The quick release clamp allows not only for a quicker clamping adjustment but also for a more secure workpiece

Dust Bag Included

Keep your work environment clean & safe! Attach the dust bag to catch debris that is fed through the rear dust port (attach for wood only)

Integrated Carry Handles

The R255SMS-DB+ is very portable! The rear carry handle allows you to comfortably pick up and safely transport around site

Extended Power Cable

The 13ft cable means that you have an extended reach for your saw, nullifying the need for extension cables

Mild Steel

Achieve ready-to-weld cuts through mild steel, whether that be sheet, steel tube (square or rectangle) and angle iron

Wood with Nails

Cut through hardwood, softwood, reclaimed timber. Even wood with embedded nails!

Wood Plastic Composite

Cut through WPC for your latest summer decking project with ease. Achieve a clean cut every time!

Plastic

Cuts through plastic such as acrylic & drainage tubing cleanly without burning or melting the workpiece

Product description

DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which provides on average, 183 cuts of 2x4 Pine - or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that provides adjustment free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which ranges from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2x8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to improve productivity and ensures cutting accuracy. An oversized bevel scale makes bevel angle adjustments accurate and easy. The compact, lightweight design (31.6 bs.) allows for easy transport and storage. It has a cam lock miter handle which delivers quick and accurate miter angles, along with a precise miter system and machined base fence support for optimized durability and cutting accuracy.

• Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility. Capacity to cup 3 5/8in nested crown and 3 1/2 base vertically
• Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy. Oversized bevel scale makes bevel angle adjustments accurate and easy
• Compact, lightweight design (30 lbs.) allows for easy transport and storage
• Cam lock miter handle delivers quick and accurate miter angles
• Precise miter system and machined base fence support optimize durability and cutting accuracy
• Battery & Charger Sold Separately

User questions & answers

Question:	How well was this product packaged? Did anyone experience damage during shipping? I don't usually buy heavy items like this on-line. Thanks
Answer:	The saw was sufficiently packaged to protect it during shipping. I got mine in perfect condition. The manufacturer's packaging took care of most of the protection, and I'm pretty sure it was over-boxed as well. Hope this helps, and enjoy the saw. I haven't had a ton of use from mine yet, but have done several smaller projects with just a few cuts and have been pleased with the performance (it's not a cheap toy) and ease of handling. The size and weight make it easy to get it out and start cutting, then put away quickly when the job is done.
Question:	What is the difference between the dcs361b and the dcs361m
Answer:	The M1 is the European version
Question:	I see the vertical max is 3 5/8, but could this cut 4x4 lumber
Answer:	No not with one cut. You would have to turn the 4x4 over. Blade is a 7 1/4" diameter, same as a hand held circular saw. From the tip of the teeth to the edge of the washer (at center of blade) I get 2 7/8".
Question:	What's the cross cut capacity if we use the entire sliding action
Answer:	On a straight 90, I can cut 8" wide boards. On a 45, I can cut right around 5-7/8". This saw was a great addition for me, as I'm constantly working in places away from a simple power source (my generator is a beast and not easy to transport). It cuts cleanly, hasn't bogged down yet (even on wet 2x6 treated), and is super light and easy to transport.

Product description

The RYOBI 7-1/4 in. Sliding Miter Saw is a new edition to the miter family. It can make angled cuts up to 45° on boards all the way up to 6 in. wide, and has a max RPM of 5,350. It also features an LED cutline indicator that illuminates the workspace and makes for easier cuts. Combine that with positive miter stops for all common crown molding angles, and a quick action lever that gives you the ability to lock in on any angle and you can see how this saw will allow anyone to become a precision craftsman. For more things RYOBI visit ryobitools.com Maximum crosscut dimensions: 90° - 1-1/2 in. x 10 in.; 45° - 1-1/2 in. x 6 in. Sliding head provides maximum capacity for up to 10 in. W boards at zero bevel Miter stops located at the most common crown molding angles: 0°, 15°, 22.5°, 31.6° and 45° (left and right) LED light accurately aligns cutline with blade and illuminates the work piece Miter ranges from 47° left to 47° right to accommodate a wide variety of cuts Miter detent override provides quick-action lever bypass with 1 simple motion Equipped wit horizontal D-handle for utmost visibility and comfort Electric brake stops blade rapidly for added safety Includes: 10 Amp sliding compound miter saw, 7-1/4 in. carbide-tipped blade, work clamp, blade wrench and dust bag

Product description

Remember when your Miter saw could do it all? Create cuts at any angle with the WEN 10-inch single bevel sliding compound Miter saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45 degree bevel and 45 degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive Miter stops: Two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, The Miter Lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-Tooth carbide-tipped blade (W/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust Collection port allows for connection to either the included dust bag or your dust Collection device of choice. And, because it’s a WEN product, your Miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

• Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick
• Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left
• Onboard Class II laser guide illuminates your line of cut
• Features a 7-1/2-inch Crown molding nested capacity and a 6-3/4-inch base board vertical capacity
• Includes a 10-inch 40-Tooth carbide-tipped blade, Two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

User questions & answers

Question:	Cut steel
Answer:	Thin steel you can cut but have to have the correct blade that is make to cut steel.
Question:	What size is the arbor
Answer:	Arbor size is standard 5/8"
Question:	Are the indents on the miter gauge tape or stamped
Answer:	Stamped
Question:	Will this saw cut a 4x4 piece of lumber
Answer:	Yes. With ease

Product description

Gold toned aluminum miter box 37-240 plus 35-550 Fine Kerf Saw (42 TPI) for accurate cuts in materials 7/8″ thick or less.



6-1/2in. aluminum miter box has thin slots for 60, 45, 90 degree angle accurate cuts with fine kerf saw. Saw Specs: 6-1/2in. long x 1-3/16in. deep with 42 Teeth Per Inch. MADE IN USA.

• Fine Kerf Saw
• With Aluminum Thin Slot Miter Box
• Item Package Dimension: 13.0" L x 4.0" W x 1.5" H
• Item Package Weight: 1.0 lb
• 6-1/2in. aluminum miter box has thin slots for 60, 45, 90 degree angle accurate cuts with fine kerf saw.
• Saw Specs: 6-1/2in. long x 1-3/16in. deep with 42 Teeth Per Inch.
• MADE IN USA.

User questions & answers

Question:	Will this do 45 bevel cuts, or only 45 miter
Answer:	Not sure about your particular saw but don’t see why not.
Question:	will it cut aluminum
Answer:	Radius is to great for the set to fit.ijust looked at it on a 4 1/2”.
Question:	what width stock can be cut
Answer:	The anvil is marked from 5-12. The hammer is fine enough for a twelve-point set without interfering with adjacent teeth.
Question:	How tall of material will it cut? How smooth is the surface once cut
Answer:	I checked mine out and could not find any marking on either the box or the tool to indicate where it was manufactured. I examined the set closely and from the quality and finish I would speculate that it was made outside the USA. From a functional point the tool seems to be adequately designed and made to do the job it was meant to do, with the necessary precision. The set simply provides the "set" to each tooth by bending it ever so slightly off to the side with every other tooth going either left or right. the key is to make that offset angle uniform in both directions. It appears to do that as desired and is adjustable for the amount of "set". It is difficult to say how durable the tool is, which is the most important aspect of a quality tool. Fit and finish, I would give it a 7-8, I don't feel I have given it a sufficient workout to "guesstimate" durability. I did use it to refresh a well used saw's set and it functioned very well. For the amount of work I expect to accomplish in setting saw teeth and the price, I'm satisfied with the tool.

Product features

For precise cuts!

.014″ slot width, 45º, 60º & 90º angles, 7/8″ cutting depth, 2″ cutting width, 6-1/2in. aluminum miter box for making accurate cuts with fine kerf saw.

Fine Kerf Universal Razor saws are great all purpose saws for modeling and woodworking. They cut balsa and other wood, plastic, copper and brass, while leaving smooth edges. Suitable for cutting most shapes and thicknesses. 11″ overall length. Blade is 6-1/2in. long x 1-3/16in. deep with 42 Teeth Per Inch.

For hobbies and for woodworking!

Zona 35-241 Miter Box and Saw Set is accurate for miters and splicing. In many cases with small scale or detailed work it is faster than setting up a power miter saw, and much safer!