11 best bosch pole saws

Product description

SAW WHAT YOU SEE! Tackle those hard-to-reach branches with ease. The Sun Joe SWJ803E electric pole chain saw takes the danger and difficulty out of trimming your overgrown trees. Stand safely on solid ground and simply adjust SWJ803E’s telescoping pole to gain up to 14 feet of overhead reach. Powered by a robust 8-amp motor, the SWJ803E’s multi-angle head can handle the most stubborn tree limbs up to 9.5-inches thick. It features a durable, 10-inch Oregon bar and chain with an auto-oiler to keep the bar and chain fully lubricated during use. Unlike gas-powered tools, SWJ803E is powered electrically, so you’ll reliably power up with the push of a button without having to deal with smoke, fumes, unpredictable starters or costly tune-ups. Plus the SWJ803E comes equipped with a built-in safety switch to prevent accidental starting. The Sun Joe SWJ803E electric pole chain saw carries a full two-year warranty.

• Power Source Type: Corded Electric

User questions & answers

Question:	does this one have automatic chain lubrication
Answer:	you can get chain oil at lowes, home depot or autozone, autozone only has 1/2 gallons, I believe for $10, cheaper at lowes, that's where I get mine
Question:	Does the chain come installed
Answer:	Mine was assembled except for attaching the two halves of the pole. Then I had to add the chain oil.
Question:	Does the chainsaw detach from the pole? Prior responses say both yes and no
Answer:	Do a search on ebay and google
Question:	When you run out of oil what kind and where do I purchase extra oil from
Answer:	The loop pictured at the end of the handle is attached and it also comes with a strap that goes around you shoulder and back for added help in holding.

Product features

Saw What You See!

The Sun Joe SWJ803E electric pole chain saw takes the danger and difficulty out of trimming your overgrown trees. Stand safely on solid ground and simply adjust SWJ803E’s telescoping pole to go from 5.8 to 8.8 feet for up to 14 feet of overhead reach!

Powered by a robust 8-amp motor, the SWJ803E’s multi-angle head can handle the most stubborn tree limbs up to 9.5-inches thick. It features a durable, 10-inch bar and chain with an auto-oiler to keep the bar and chain fully lubricated during use.

Powered Electrically

Reliably power up with the push of a button and features a safety switch to prevent accidental start.

Multi-Angle Head

The SWJ803E features a multi-angle adjustable head, which cuts at 0º to 30º angles.

15-Foot Reach

Telescoping pole extends to 7.2 ft providing up to 14 ft of overhead reach.

Product description

The Bosch CS5 120-volt 7-1/4-inch circular saw is a tool for value-conscious professionals focusing on core user needs. The lightweight CS5 delivers 15 amps of power and a left-blade design for the clearest line of sight while cutting. The anti-snag lower guard lets you make cuts without having to advance the guard, even while making bevel cuts.

• Features enhanced line of sight, power, and durability
• Left-blade design
• Anti-snag lower guard
• Powerful 15 amp motor

User questions & answers

Question:	do any of the dewalt saws come with a laser
Answer:	The Ax is a great blade that is fantastic at cutting everything. I haven’t tried it on metal! It should have no problem with bamboo and it will last a long time.
Question:	Does this saw have a safety toggle switch
Answer:	At least 50, more if you don’t press too hard
Question:	the base on my cs5 is a 1/4 " off. does anyone know how to fix this
Answer:	EZARC wood pruning blade are made of Chrome vanadium with sharp teeth, which is great for trees and bushes pruning, it is definitely a very helpful wood sawing blade for your gardening works.
Question:	How does the left side design differ from a regular circular saw
Answer:	I think they are , good blades.

Product features

Bosch CS5 120-Volt 7-1/4-Inch Circular Saw,Bosch Blue

The Bosch CS5 left bade design saw is the fast cutting saw. Bosch quality for all jobsite environments and the best product at the right point. Featuring a powerful 15 Amp, high output motor, Bosch's CS5 7-1/4 In. circular saw offers fast, smooth cutting at a variety of different angles. Weighing in at just 10 Lbs., the Bosch CS5 is easy to handle and comfortable to use. An unobstructed view of the cut line means better visibility for more exact cuts.

Product description

The 12 in. Dual-bevel Glide Miter saw features the smooth cutting motion, accurate performance and space-saving design of Bosch Patented axial-glide system.

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

User questions & answers

Question:	is ther laser on this saw
Answer:	The UK version (Bosch GCM 12 GDL Professional) ships with an included non battery powered laser that produces two lines that bracket the saw kerf. Not sure why Bosch made the laser layout tool an extra for USA version. There are other differences between these models and the UK 240V version has more options as stardard equipment.
Question:	dose this saw have a depth stop on it so you can create a dado
Answer:	Yes, it has a depth stop. The saw cuts very nice and it glides effortlessly, u must adjust the drag on it. When cutting dadoes, it does not hang up like rail type saws when the fine dust finds its way into the rail bearings like the Dewalt I used to use. It was an expensive investment in a saw, but i really like it so much more then any of my previous sliding compound saws.
Question:	Where is this saw made? Asia/US/EU
Answer:	Best miter saw you can buy. Doesn't matter where it was made
Question:	Why buy this miter saw versus the Bosch
Answer:	SGT .several reasons i chose this saw over the 5312. first off I run a high end custom cabinet shop and this saw sees very heavy uses. The sliding rails on the type of the Bosh 5312 always get dust in the bearings and with time the sliding action sticks and must be taken apart, the bearings cleaned and re-lubed with dry silicone lubricant. That is what my experience was with my last 3 sliding saws, (Dewalt, Ryobe and Dewalt pro). the other thing i love about the Bosch GCM12SD its there are no rails sticking out the back of the saw, and the clearance from the wall where my saw sits is no longer needed. It was a great investment even though its on the pricy side. i love the accuracy and the performance, I change to a better cutting blade and the performance got better. I switch from the stock blade and now run a Forrest CM12806115 Chopmaster 12 inch 80 tooth blade cleaner cuts and very smother with no tear outs. i hope this helps you

Product features

Bosch 12-Inch Dual-Bevel Glide Miter Saw (GCM12SD)

The Bosch GCM12SD is a 12-Inch Dual-Bevel Glide Miter Saw that features a smooth cutting motion, accurate performance and a space-saving design of the Bosch-exclusive Axial-Glide System. Pre-aligned Squarelock fences help the saw maintain precision throughout its life; a soft-grip ambidextrous handle along with a combination dust chute and vacuum adaptor add to user comfort. The saw also offers a large cutting capacity, easy-to-read bevel and miter scales with detents at common angles, and easy-access upfront controls.

Compact cutting

Featuring a Bosch-exclusive Axial-Glide system for durable precision, complete control, and compact workspaces.

Precise control

High-precision Squarelock quick-release fence aligns fence 90 degrees to saw’s table and requires no adjustment; one-touch lock/unlock to slide fence for added support.

Versatile saw

With a 14-Inch expanded horizontal cutting capacity, 6-1/2-inch vertical capacity, and a 6-1/2-inch crown capacity (45-degree spring), this miter saw is perfect for any variety of cuts.

Adjustable

The saw provides easy adjustments with a large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles.

Product description

The innovation responsible for both the unique appearance and the unparalleled level of performance is Bosch's patented Axial-Glide system. Beyond giving the CM10GD its distinctive profile, Bosch's Axial-Glide system eliminates three key challenges miter saw users have endured since the first slide systems debuted many years ago. While the traditional sliding compound miter saw approach enables users to make wider cross cuts, that system takes up more space and is prone to misalignment and stickiness over time. By replacing the sliding rail system with a hinged or articulating glide arm system - similar to the linkage used in a four-bar suspension design - Bosch created a more compact miter saw that delivers durable precision, remaining true and smooth over time. The Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw features a powerful 15-Amp, 4, 000-RPM motor with large easy-to-read bevel and miter scales allowing for precise, quick and easy adjustments: 52-Degree Left/60-Degree Right Miter Capacity; 47-Degree Left/47-Degree Right Bevel Capacity with marked detents and roof pitch angles. The tall sliding 4-1/4-Inch fences allow for increased cutting capacity when cutting tall base and crown moulding. With an ergonomic soft-grip ambidextrous trigger handle and a clear lower guard for unobstructed visibility throughout cut, the CM10GD provides maximum comfort for all-day use.

• ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment
• CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy clean-up.
• CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown/chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown.Depth Front-to-Back, Not Including Arm:30 inch
• COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do.
• COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.

User questions & answers

Question:	What are the dimensions for this saw
Answer:	Maximum crosscut up to 2-in x 8-in (nominal) at 90 degrees and 2-in x 6-in at 45
Question:	I have looked everywhere and can't find the saw's footprint size. How wide and deep in the saw base not counting the glide system
Answer:	No it is not
Question:	I have a flip top cart, the with is about 24 inch, can this saw fit on that
Answer:	yes
Question:	What is the maximum board thickness this saw can cut? This specification is listed nowhere for some reason
Answer:	yes

Product features

Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw

The Bosch CM10GD 10-inch Dual-Bevel Glide miter saw provides power and versatility. Thanks to the compact design and the innovative Axial-Glide System, this unit provides smooth cutting control in up to 10 inches less workspace than other miter saws, so users are able to work productively in hallways and other tight quarters. The saw delivers 4,800 no load rpm with outstanding cut capacity – 12-inch horizontal capacity (nominal), 5-1/2-inch vertical capacity against the fence (base), and a 6-inch crown capacity against the fence (45 degree spring).

Includes

10-Inch Dual Bevel Glide Miter Saw, 60-Tooth Blade, Material Clamp, Dust Bag

Axial-Glide System

The innovative Bosch Axial-Glide System gives the user durable precision in a compact workspace. Replacing the sliding rail system with a hinged or articulated glide arm system saves up to 10 inches of working room while giving the user enhanced alignment and a smooth glide for the life of the unit. As a result, users produce smooth cuts and have complete control over the saw's cutting motion.

Flexibility and Ease of Use

The all-metal bevel lock lever and range selector was designed to be upfront on this unit, to enable fast and easy bevel settings without reaching around behind the saw. The tall 4-1/4-inch sliding fences also support quick bevel set-ups, professional level precision and increased crown molding capacity.

Lock and Chop

For the utmost in chop cutting capacity for a 10-inch miter saw, the Bosch CM10GD has a crown/chop lock that locks the head in place. This enables users to power through upright base molding and nested crown molding. The adjustable miter detents with easy-read markings let you accurately set cuts up to 47 degrees left or right. The common angles have miter detents at 0, 15, 22.5, 31.6 and 45 degrees on the right and left, and 60 degrees on the right.

Dust in the Bag

Like other Bosch models, this saw includes a combination dust chute and vacuum adapter to hook up your 1-14-inch and 35mm hoses. The "click and clean" platform ensures that the vac hose remains in place, so users can concentrate on making the cut.

Product description

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N14 Surgeon tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31. 5 Lbs. , this saw features easy portability while still providing a 10-5/8 In. crosscut capacity. It features BITURBO Brushless Technology, a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah (sold separately) CORE18V batteries. In testing, the saw delivers 377 cuts per charge with a CORE18V 8. 0 Ah Performance Battery. With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

• Portable, powerful 18V miter saw design – a truly mobile jobsite solution, this saw provides light weight and pro capacity
• Pro capacity – delivers 3-5/8 In. nested crown cutting, with 47° left to 47° right cuts against fence and 10-5/8 In. crosscuts
• Convenient portability – weighs only 31. 5 Lbs. (tool only, not including battery)
• Accurate laser guide system – precisely aligns the cut line to the blade
• Precisely centered sliding bars – delivers very smooth and easy saw sliding
• CORE18V 8.0 Ah PROFACTOR Performance Battery – delivers 100% more runtime and over 75% more power than the CORE18V 4.0 Ah battery for high-demand applications

Product description

Reciprocating Saw Blade, Primary Saw Application Metal, Length 6 In., Teeth per Inch 18, Material Bi-Metal, Back Straight, Shank 1/2 In., Height 3/4 In., Application Ferrous and Non Ferrous Metals, Package Quantity 5

From the Manufacturer

Bosch is the worldwide leading manufacturer of linear edge, topping the market through engineering expertise, manufacturing capabilities and world reknowned quality. Continuing on the path of innovation and engineering excellence, Bosch has developed a new line of recip blades. By incorporating key design features, materials and patented tooth technologies, Bosch optimizes blade cutting efficiency for the fastest cutting and longest lasting blades available. Choose from blades suited for occasional, standard, heavy or demolition use in a variety of materials such as wood with nails, metal, stainless steel, cinder block, cement board or fiberglass. Flexible blades, thick kerf and tall body blades and carbide blades for abrasive materials are available and blade selection is made even easier with application color-coding and callouts on the blades.

• Power Tools and Accessories
• Package Dimensions: 22.275 H x 1.676 L x 5.994 W (centimetres)
• Package Weight: 0.086 kilograms
• Country of Origin : Switzerland

User questions & answers

Question:	Will these work on the sawzaw / jigsaw combo tool worx wx550l tool
Answer:	Thank you for your question. All our Bosch Reciprocating Saw Blades like the RM618 are universally made to fit most manufactures Reciprocating Saws including Black and Decker. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Will this blade work on a Porter Cable saw
Answer:	Thank you for your question. The RM618 Bi Metal Cutting Blade is designed for Metal, metal profiles and pipes. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Is this compatible with my black and decker reciprocating saw
Answer:	I doubt it..... These blades wouldn't cut a 1/2" bolt all the way through before the blade dulled so badly it wouldn't cut anymore. I would have gotten better results with a butter knife.
Question:	Will these blades cut through cast iron pipe
Answer:	import blades but do a pretty decent job

Product features

Bosch RM618 6-Inch 18T Metal Cutting reciprocating Saw Blades - 5 Pack

Product description

The Worx 10” – 20V Pole Saw takes the compact and lightweight standard Worx 20V Chainsaw and attaches a pole for up to 12 feet of reach so you can trim away problematic tree limbs. It’s the perfect marriage of our slim 6.2 lbschainsaw (WG322.9) and our pole attachment so you can leave the ladder in the garage and have your feet safely on the ground when you work up in the air. Trust us, everyone in your family will be thankful for this safer method of trimming away tree limbs. Modern features make this pole saw easy to operate. The handle at the bottom of the pole features an on/off switch, so you don’t have to constantly raise and lower the chainsaw just to turn it on and off. The battery attaches at the base of the pole, when connected, for easy switch out when you need to recharge. And it snaps into the saw itself when you’re using it independently. Oh, did we forget to mention that this 2-in-1 works on the ground just as well as it does in the air? The pole comes off easily without the need for any tools, and you get a fully functional chainsaw to chop up fallen branches and the like on the ground. The auto-tension and auto-lubrication systems keep the tool and the chain in peak condition every time you use it. And the 20V 2.0Ah battery and charger that come with this pole saw can be used to operate every tool on the Worx Power Share platform, saving you money in the long run.

• 12’ EXTRA REACH: It takes just a few minutes and no tools to attach the pole. And with a reach of up to 12’ and only 10 pounds, you’ll be able to get to branches and limbs before they become a problem
• FAST, CLEAN CUTS: This cordless 20V PowerShare chain saw is as fast and powerful as anything in its class. And with no gas, and no cord, there’s much less muss and fuss
• DO IT ALL WITH THE SAME BATTERY: Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products
• AUTO-CHAIN TENSION: The automatic, tool-free chain tension system ensures you’ll always have the correct tension for the job at hand
• AUTO-CHAIN LUBRICATION: The automatic chain lubrication system not only makes for smoother, more efficient cuts, but it extends the life of the tool. And the oil level indicator lets you know exactly where you stand
• COMPACT, LIGHTWEIGHT: The saw itself weighs only 10 pounds You’ll work longer, with less strain on your hands, arms, back, and legs
• PLENTY OF JUICE: These are the same batteries we use on our Jawsaw and in our Lawnmowers. They’re powerful enough for those, and powerful enough for a chain saw

User questions & answers

Question:	Does it come with a battery
Answer:	when inserting the battery make sure you hear a click, that tells you the battery is inserted properly, then close the cover. I found this out when mine wouldn;t start
Question:	Can you buy extra batteries
Answer:	Yes
Question:	does this come with a charger
Answer:	90 minutes
Question:	I already have a 20v worx weedeater. i don’t need the trimmer and battery. can i purchase just the polesaw without the battery and it be cheaper
Answer:	This is a tool only mower. If you want to buy one with a 4.0 battery and standard charger the part number is 591082. If you want to buy one with a 6.0 battery and a rapid charger the part number is 591081.

Product features

Lightweight: Just Over 10 lbs

It’s easy to keep the polesaw up high for as long as you need to get the job done. And its compact design makes it simple to maneuver around the branches that you want to stay up there.

Auto-Tension

A well-running saw is safer to use. Auto-tension makes the chain operate at peak performance and protects against over-tightening. Plus, you don’t need to use any tools to make adjustments.

10-Foot Reach

Leave the ladder in the garage for safer branch trimming. With your feet firmly on the ground you can take care of branches up high before they become a problem.

Ergonomic Grip

With a vibration-absorbing handle, this chainsaw is as comfortable to use as you could expect a chainsaw to be. It’s also well-balanced, keeping you firmly in control.

Auto-Lubrication System

The chain maintains perfect lubrication, which means it’ll spin smoothly around the bar and maintain its 12.5 ft/s chain speed, so you get fast, clean cuts every time you use it. And you’ll know when it’s time for a refill with the oil-level indicator window.

Control the Saw From the Pole

The handle of the pole has an on/off trigger, so you can stop and start the chainsaw without having to bring it down each time you want to do so. It saves time, battery life, and it’s safer.

Product description

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N Surgeon bare tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31. 5 Lbs. (tool only, not including battery), this saw features easy portability while still providing a 10-5/8 In. crosscut capacity. It features Bosch’s MEGAWATT Technology, a Bosch-exclusive brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah CORE18V batteries (sold separately). In testing, the saw delivers 377 cuts per charge with a CORE18V 8. 0 Ah Performance Battery. With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

• Portable, powerful 18V miter saw design – a truly mobile jobsite solution, This saw provides light weight and Pro capacity
• Pro capacity – delivers 3-5/8 in. Nested Crown cutting, with 47° left to 47° right cuts against fence and 10-5/8 in. Crosscuts
• Convenient portability – weighs only 31. 5 lbs. (Tool only, not including battery)
• MEGAWATT Technology – a Bosch-exclusive brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by 8. 0 Ah and 12. 0 Ah CORE18V batteries (sold separately)
• Accurate laser guide system – precisely aligns the cut line to the blade. Max. Cut Capacity - 0° Miter 0° Bevel-2-3/4 inch x 10-5/8 inch. Max. Cut Capacity - 0° Miter 45° Left Bevel-1-1/2 inch x 10-5/8 inch. Max. Cut Capacity - 45° Miter 0° Bevel-2-3/4 inch x 7-1/2 inch. Max. Cut Capacity - 45° Miter 45° Left Bevel-1-1/2 inch x 7-1/2 inch

User questions & answers

Question:	How many amps is the motor
Answer:	Hi! Since he GCM18V-08N is a cordless tool, the amps would depend on the battery used. For best performance, we recommend using the GBA18V80 8.0Ah battery. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Does this saw have an LED light to create a shadow line or just a laser
Answer:	The GCM18V-08N features an accurate laser guide system – precisely aligns the cut line to the blade. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the blade arbor size for the US version of this saw
Answer:	5/8" minimum arbor. Blade diameter 8¼" – 8½"
Question:	Is there a way to plug in or is a adapter planned for that? Thank you
Answer:	No way to plug in that I know of. Have not heard of any plans to make it adaptable to corded and cordless.

Product features

Bosch GCM18V-08N 18V 8-1/2 In. Single-Bevel Slide Miter Saw

This Bosch miter saw combines professional cutting capacity with outstanding portability to deliver a truly mobile, cordless solution to the jobsite. The GCM18V-08N Surgeon bare tool kit features an 8-1/2 In. single-bevel, sliding compound miter saw delivering a 3-5/8 In. nested crown cutting capacity, cutting from 47° left to 47° right against the fence, which is an exceptional range for a cordless 8-1/2 In. miter saw. At a manageable 31.5 Lbs. (tool only, not including battery), this saw features easy portability while still providing a 10-5/8 In. crosscut capacity.

With an accurate laser guide system to precisely align the cut line to the blade, the saw is engineered with precisely centered sliding bars, leading to a very smooth and easy saw sliding. It provides a dust chute and dust bag, providing efficient dust collection.

Product description

The Bosch ROS20VSC 5" Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well blended, ultra smooth finish. This tool is designed to allow finish carpenters and cabinet makers to Complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect Speed for whatever task they need to Complete, with an optimal on board system for filtering fine dust.

• Smooth Finish: Pad dampening system designed to eliminate swirl marks on both flat and contoured surfaces
• Easy Disc attachment: Through Bosch's signature Hook and Loop disc attachment system, sanding pads stick to the hand sander, acting like a Velcro adhesion material
• Variable speed Control: Powerful 2.5 AMP motor allows speed to work piece and task matching with ease
• Dust collection: Features a micro filter system for fine dust and trapping particles as small as a 1/2 micron in diameter. Durable and compact, the dust canister shows dust level and easily detaches for mess free tasks
• Kit contents: Includes sanding pad, sanding disc, dampening ring, dust canister, vacuum adapter and carrying case

User questions & answers

Question:	Where could I get replacment filters
Answer:	Thank you for your question. The filters are not available separately it would be a replacement dust canister part #2609199179. http://www.amazon.com/Bosch-Sander-Replacement-Container-2609199179/dp/B002ENHE14/ref=sr_1_2?s=hi&ie=UTF8&qid=1428435615&sr=1-2&keywords=Bosch+2609199179 If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Can this sander be hooked up to a vaccum using standard attachments
Answer:	Yes it can, I hook mine upto a Rigid Shop Vac. However, because of the size of a shop vac type hose I would suggest going into a smaller hose that you would attach to the larger shop vac hose. For your Information, this sander does have a connector to connect to a dust extraction hose instead of the included dust system. This sander does make a lot of dust so going into an external extraction system is a big help.
Question:	My new ros20vsc, set at 6, slows noticeably if i just set it on a suface to sand. is this normal
Answer:	Thank you for your question. The ROS20VSC Orbit sander normally has a slow start, however, if it is for the whole time you are using the tool with the speed of 6, we might need to evaluate it. Kindly contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the difference between this and the ROS20VSK version? Just the carrying bag? Does the 'K' version have anything this one does not
Answer:	Thank you for your question. The ROS20VS is the same sander in both kits. The difference is the ROS20VCS will have a soft canvas carrying bag and the ROS20VSCK will include a hard carrying case. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

ROS20VSC 5-Inch Random Orbit Sander/Polisher Kit

The Bosch ROS20VSC 5-inch Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well-blended, ultra-smooth finish. This tool is designed to allow carpenters and cabinet makers to complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect speed for whatever task they need to complete, with an optimal on-board system for filtering fine dust.

Includes

ROS20VSC 5-inch Random Orbit Sander, Soft Backing Pad, Sanding Disc, Vacuum Hose Adapter, Contractor Bag.

Built to Erase Swirl Marks

The Bosch ROS20VSC is designed to eliminate the most common complaint of random orbit sander users, swirl marks on the work piece. It features an integral pad dampening system that helps prevent swirl marks. The tool features Bosch’s signature HookTight hook-and-loop disc attachment. This attachment has over 35,000 long-life hooks that will ensure firm grip of the disc during use. Additionally, the microcellular backing pad is pliable to ensure a smooth, fine finish on both flat and contoured surfaces alike.

Right Speed for the Task

This random orbit sander/polisher includes variable-speed control, so users can demand the exactly right speed for each individual task. The speed is adjustable from between 7,500 and 12,000 opm, with a single speed of 12,000 opm, so operators can dial up or down. The orbit diameter is 3/64-inch, and the tool weighs in at only 3.5 pounds, furnishing remarkable sanding effectiveness in a tool that is straightforward and easy to deal with.

Comfort Comes First

The Bosch ROS20VSC features a comfortable soft-grip top and body in its design, which allows the user to have multiple grip positions. Thanks to this feature, the days of user fatigue and discomfort from a single grip are gone. In addition, this sander produces a low-vibration operation for extended periods of use. Constant response circuitry maintains constant speed under load.

Dust Prevention

This tool has a built in microfilter system that traps particles as small as 1/2 micron in diameter. The microfilter dust canister curtails dust spillback into the sander. This ensures that users aren’t breathing in too much dust on the job. The compact dust canister simply twists off, making the dust level visible and incredibly easy to detach when necessary. The sander is compatible with standard 1-1/4-inch and 1-1/2-inch vacuum hoses or any Bosch vacuum cleaner hose, and it features a dust-sealed switch.

Product description

Keep your garden neat and tidy with this rechargeable 10.8v cordless garden saw from Bosch.



The Bosch KEO is a powerful 10.8V cordless garden saw that can be used anywhere and will trim branches with ease. Perfect for garden maintenance and keeping your garden neat and tidy.



The detachable 'A-Grip' will grip onto loose branches to ensure cutting is hassle-free while the integrated 10.8V Li-Ion battery ensures there is no memory effect and no self-discharge leaving you free to take care of your garden wire-free.



This lightweight and long-lasting saw is ideal for almost any size of garden and designed with a comfortable soft-grip and ergonomic handle, it’s a great addition to your garden tool collection.



Specifications

Soft grip handle

Detachable A-Grip

Cutting system: Reciprocating saw

Cutting Diameter: 60mm with ‘A-Grip’, 80mm without ‘A-Grip’

10.8v rechargeable Lithium battery

Battery capacity: 1Ah

Charge time: 3.5 hours

SDS blade replacement system

Dimensions: H 6.7 x W 3.7 x L 37.8cm

Weight (without ‘A-Grip’): 950g

Weight (with ‘A-Grip’): 1050g

Cuts per battery charge (up to 15mm): 190

Cuts per battery charge (up to 60mm): 30

Stroke rate (no load): 1600spm

Stroke rate (load): 2800spm

Saw blade stroke: 20mm

• 10.8 V lithium-ion integrated battery for a powerful performance - no self-discharge, no memory effect, always ready to use
• Softgrip and ergonomic shape for increased manoeuvrability, safety lock prevents unintentional activation
• Easy saw blade changes for use on a variety of garden materials
• Quick stop and hand guard for increased safety, easy charging due to mobile phone-type charger
• Detachable A-Grip for high performance in unsupported branches

Product description

The Bosch ROS20VSK 5" Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well-blended, ultra-smooth finish. This tool is designed to allow finish carpenters and cabinet makers to complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect speed for whatever task they need to complete, with an optimal on-board system for filtering fine dust.

From the Manufacturer

The Bosch ROS20VS is designed to give even the most exacting finish carpenters, cabinet makers, woodworkers and others exactly what they want, beginning with great performance and results. The optimized combination of pad orbit and rotation delivers fast removal and a well-blended, ultra-smooth finish. Bosch's integral pad dampening system, a pad braking system, is designed to eliminate the most common complaint of random orbit sander users; swirl marks on the workpiece. Finish quality is further enhanced with the use of a soft microcellular backing pad. The pliable pad ensures a smooth, fine finish on flat or contoured surfaces.

• SMOOTH FINISH: Pad dampening system designed to eliminate swirl marks on both flat and contoured surfaces
• EASY DISC ATTACHMENT: Through Bosch's signature Hook and Loop disc attachment system, sanding pads stick to the hand sander, acting like a Velcro-adhesion material
• VARIABLE SPEED CONTROL: Powerful 2. 5 AMP motor allows speed to work-piece and task matching with ease.No Load OPM:7,500-12,000
• DUST COLLECTION: Features a micro filter system for fine dust and trapping particles as small as a 1/2-micron in diameter. Durable and compact, the dust canister shows dust level and easily detaches for mess-free tasks
• KIT CONTENTS: Includes sanding pad, sanding disc, dampening ring, dust canister, vacuum adapter and hard carrying case

User questions & answers

Question:	Is there an adapter or some conversion where I could add a buffing pad? (I realize it's not meant for that
Answer:	No. mine has worked fine, three years later still going strong. Never gets hot.
Question:	I broke the sawdust collector by stepping on it. Where in the world can i order just that piece
Answer:	1/2" Arbor
Question:	Is 1/16" cupping in the disc normal
Answer:	It does not have a horse power rating motor description says a rugged 2.1 amp induction motor have not used it much But has plenty of power for my minimal usage it will see hope that helps you
Question:	will the dust collection connection on the sander body accept a vacuum hose
Answer:	Pretty sure I just used some drywall screws.

Product features

Versatile

Variable-speed control to match speed to workpiece and task

Comfortable

Soft-grip top and body with low-vibration operation

Professional

Delivers fast removal and a well blended, ultra smooth finish

Powerful

2.5 Amp motor allows finish carpenters and cabinet makers to complete their tasks quickly