10 best atd polishers

Product description

Random Orbit polishing action for swirl-free finish. Includes multi-position side handle and d-handle for comfort. Variable speed settings allows the correct amount of polishing power for each application. Soft start feature provides improved speed control. Rubber grip provides added comfort and reduces vibration. 6" hook and loop backing pad makes changing pads fast and easy.

• Accepts 5/16"x24 spindle thread accessories
• No load speed: 2500-6500 OPM
• 5/8" diameter Orbit
• UL/tell listed

User questions & answers

Question:	Is this variable speed
Answer:	this watch requires more muscle coordinaton than I possess. getting old is not for youngsters..help
Question:	Should I use 6.5" or 7" pads (stated size) with this polisher
Answer:	Just follow the instructions on the Amazon website.
Question:	Can you change or switch to different attachments
Answer:	This hammer is 28 ounces. Primarily a frame and demolition hammer. Also good for nailing decking and other heavy duty hammering. This hammer will built arm muscles. Not for the average homeowner. A real heavy weight
Question:	What is the shaft connection dimensions
Answer:	I’ve been a handyman for 50 yrs and have never had to clean my hammer. I would think it would clean easily, depending on what is on it.

• 【Powerful Motor】This buffer polisher has a Powerful 10Amp 1200W motor offers strong power, long life and performance for the most demanding applications. Trigger lock function provide more convenience
• 【6 Variable Speed】 The speed settings are located on the top of the motor housing.It features 6 settings allowing you to increase or decrease speed from 1000 to 3800 RPM. You can use a higher setting on harder materials and lower setting on softer materials
• 【Spindle Lock】A spindle lock button has been provided for locking the spindle of your tool in a stationary position for your safety. Depress and hold the lock button while installing, changing, or removing accessories. The threaded shank size is 5/8-inch
• 【Including】You will get a buffer polisher tool, 2pcs 7" wool polishing bonnet, 2pcs 7" Polishing Sponges, a top D Style Handle, 2pcs handle screws, 1 pair carbon motor brushes, and a Allen wrench
• 【Buffering, Polishing, Sanding】Designed for car polishing, sanding, waxing, sealing glaze, polishing home appliance and furniture, as well as adding brightness of glass. Applied for glazes, sealants and wax

User questions & answers

Question:	Where can I get replacement pads
Answer:	It has a high speed and a low speed. The pump works well.
Question:	Os this a dual action machine
Answer:	Not clear on your question - Dimension A is listed in the specification at bottom of page - it shows 15.5 inches.
Question:	Does this strictly turn? I am looking for one that does not orbit and turn
Answer:	This pump is single speed.
Question:	where can i get replacement brushes
Answer:	The Hayward SP2310X15 1-1/2 HP Max-Flo XL Standard Efficient Single-Speed Medium Head Pump is rated at 70 gallons per minute against 40 feet of head (total resistance to flow), which is roughly 4,200 gallons per hour.

Product features

WORKPRO Car Polisher - 7-inch Buffer Waxer with 4 Buffing and Polishing Pads, 6 Variable Speed 1000-3800 RPM, Detachable Handle

• This WORKPRO Car Polisher has a Powerful 10Amp 1200W motor offers strong power, long life and performance for the most demanding applications. 5.9-feet power cord.
• The speed settings are located on the top of the motor housing. It features 6 settings allowing you to increase or decrease speed from 1000 to 3800 RPM. You can use a higher setting on harder materials and lower setting on softer materials.

6 Variable Speeds Control

The speed settings are located on the top of the motor housing.It features 6 settings allowing you to increase or decrease speed from 1000 to 3800 RPM.

Self-Locking

Step 1: Press the ON/OFF trigger

Step 2: Press the lock on button

Then you can release the ON/OFF trigger and the polisher can maintain a speed without continuously pressing the switch.

Spindle Lock

A spindle lock button has been provided for locking the spindle of your tool in a stationary position for your safety. Depress and hold the lock button while installing, changing, or removing accessories.

Product description

The new POLISHFLEX was developed by professionals for professionals. Motor and gear unit both operate extremely quietly. The optimum speed range of 600-2100 RPM and the high torque are ideal for treating a variety of surfaces. The ergonomic design and low weight make it easy to reach and prepare even problematical spots. The maximum polishing pad diameter is 200 mm which enables horizontal and vertical surfaces to be quickly and comfortably treated. Continuous speed control trigger for a gentle start, starting speed at Setting 1 (600-2100 rpm) and a lock-on for continuous operation. Optimized air ducting for optimum cooling of motor and gear, no annoying exhaust air for the user. Innovative combination of planetary and angular gears reduces noise to an absolute minimum. Spindle lock: ideally positioned to prevent operating error and does not interfere with the grip area.

• VR electronic control: stepless speed selection, tachogenerator-controlled constant speed, overload protection, restart inhibit and temperature monitoring
• Ergonomically shaped with Soft Grip; the machine can be controlled with precision and is comfortable yet secure to hold
• Flat gear head reduces distance to the surface; the machine can therefore be operated safetly in any position
• Powerful 1400 watt motor with highly-efficient ventilator for optimum cooling
• Backing plate and pad not included

User questions & answers

Question:	Some polishers are 3k-7.5k rpm or opm why this on is 600-2100 rpm
Answer:	These are plug in units. I have only had them for a short time but they seem to be working perfectly & as described. They work continuously as long as they are plugged in.
Question:	Hi, where is it manufactured? Is 110 volts or 220 volts? thanks
Answer:	We have installed one unit in every room of the house and we have a cat it does not seem to bother him. The product works fine been using for a couple of months: no more ants
Question:	this tool on 110V or 230V
Answer:	I'm not sure about the gold because I didn't purchase the gold watch.
Question:	Does it include a backing plate? what size
Answer:	it is battery powered Sir. very nice watch and received a lot of compliments .

Product description

Quality:

The Elitexion 6” Polishing Buffering Soft Wool Bonnet with Hook and Loop was designed for polishing and sanding surfaces. Premium grade rubber backing with 5/8 inch TPI Spindle. Ideal to use for polishing furniture, wood, plastic, metal surfaces, and automotive surfaces. The hook and loop backing pad will makes the changing between the synthetic wool pad and the sanding disc very easy and simple.



Package Includes:

1pc Hook and looping backing pad.

1pc Synthetic wool polishing pad.





Dimension:

Diameter is 6”

5/8 inch TPI Spindle.



Material:

- Plate made of durable polypropylene.

-Synthetic wool polishing pad.

• This is a 6” Inch diameter backing pad with Hook and Loop pad designed for polishing or sanding surfaces.
• Premium grade rubber backing with 5/8 inch TPI Spindle.
• Ideal to use for polishing furniture, wood, plastic, metal surfaces, and automotive surfaces.
• The hook and loop backing pad will makes the changing between the synthetic wool pad and the sanding disc very easy and simple.
• Set includes: 1pc Hook and looping backing pad, 1pc Synthetic wool polishing pad

User questions & answers

Question:	What is the max RPM
Answer:	The handle is aluminum, the blue portion appears to be pot metal and the disks are hard plastic. For the price, it is reasonanly sturdy.
Question:	is the yellow "rubber" urethane of foam? also what is the max rpm rating
Answer:	As of the date of Sunday March 3 2019 it seems to me that the picture/pictures are now changed to show the right kind of watch, ps, this tool works great = as with all tools be gentle when using, it will last for a long time.
Question:	Is this 5/8 inch coarse thread or fine thread
Answer:	If your trunk liner is held in place by plastic fittings it should work well. It worked great on my trunk liner clips/push-in fittings.
Question:	Where to buy extra soft wool with hook and loop pad
Answer:	I'm not sure what holds the bumper on but if it has plastic push in retainers this set of tools will probably take them out. For the price you should just get them because they are really handy to have around. They will however break if you pry on stuff with them that isn't those plastic push in retainers... I broke one taking the dash panels off on my F150.
Question:	Just want to be sure. Does it come with the 3 inch backing plate shown in the picture
Answer:	it probably should. I've used it on a 2012 Honda Odyssey, and a 2004 Ford Mustang. Window trims are generally the same, they snap onto the exterior of the door panel, and are held onto the panel with clips. The tool is used to pry beneath the trim piece to separate the trim from the door panel.
Question:	How many watts is the motor rated
Answer:	Yes, they are non-marring plastic. You can use them to removal dash piece and other trim parts on your car.
Question:	is this buffer multiple speed
Answer:	When I plugged my dog was looking that but then he’s totally fine! No cries, no bark. It's safe for dogs and kids. I loved this product worked very well in my house
Question:	Does the Flex PE8 come with a 3" backing plate as shown in the picture
Answer:	I place them inside the house.

• IMPORTANT: We have upgraded all the polisher pads in this batch. So please feel free to add it to cart. If you receive defective pads, contact us and we will spare no efforts to help you.
• Meet Your Needs - With powerful motor, this random orbital polisher is perfect for polishing and removing swirls, scratches, and defects from all painted vehicles, reappearing the shine of your car. You can also use it to sand wood or metal.
• Variable Speed Control - 6-speed control dial allows you to adjust the car polisher speed according to different applications; No load speed: 1,500-6,800 rpm; Low speed for waxing and buffing; Medium speed for polishing and cleaning while high speed for removing paint defects and oxidation.
• Ergonomic Design - The rubberized body and adjustable handle provide you with comfortable grip feeling and non-slip control while in use. Never worry about your machine rolling off the table or falling off your detailing car.
• Easy To Operate - Whether you have one car, two cars, or a fleet of customers’ cars to care for, this polisher/buffer executes every detailing job quickly and easily. Easy enough for beginners, powerful enough for professionals.
• What's Included - 1 x Avid Power dual action polisher, 3 x foam pads, 1 x foam disc,1 x Detachable D-handle, 1 x spanner, 1 x hex wrench, user manual.

User questions & answers

Question:	what replacement pads work best for this polisher
Answer:	I used these pads and they worked great. ZFE 6Pcs 6" Waffle Buffing... https://www.amazon.com/dp/B00LJ3OY1S?ref=ppx_pop_mob_ap_share
Question:	Avid, can you please tell me exactly what size pads this polisher uses? do i need pads that are exactly 6"? who besides you makes pads? link
Answer:	The exact pad that this polisher kit packed is 7 inch .(The backing plate is very hard and in order not to let it have no chance to touch the car surface during rotation, so we use 7 inch foam pads. ) But 6 inch pads will be also compatible with this polisher. We will sold pads within 2 months.
Question:	Does this buffer have any velcro pad on it for the pads to change pads
Answer:	Yes it does, it uses the hook and loop system which is like Velcro, very easy to change pads on this machine
Question:	Do they have a soft pad for sanding
Answer:	The pads that come with the polisher are for auto paint polishing , waxing and rubbing compounde

Product features

An ideal choice for professional detailers and enthusiasts

If you are looking for a high performance, easy to use polishing machine. This 6 inch Random Orbital Polisher is your ideal choice. It has 6-speed control dial allowing users to adjust polisher speed according to different applications. Perfect for polishing and removing swirls, scratches, and defects from all painted vehicles, reappearing the shine of your car. (To make sure the hard edge of the 6 inch backing have no chance to scratch the car surface during rotation, this polisher kit comes with 7 inch pads.)

Variable Speed Control

6-speed control dial allows you to adjust the car polisher speed according to different applications; No load speed: 1,500-6,800 opm

Detachable D-handle

You can choose a comfortable grip for your different applications. Working with handle also ensuring safer operation.

Easy On/Off Switch & Soft Start

Internal components and machine configuration finely balanced for superior ease of use

Product description

The Astro Pneumatic 247P 7" Angle Head Polisher - 2, 500rpm comes equipped with an automatic throttle release. The ball bearing construction allows the item to have a longer life and the dead handle and spindle wrench come included.

• Automatic throttle release
• Dead handle and spindle wrench included
• Ball bearing construction for long life
• Avg. Air Consumption.:
• Air Inlet Thread NPT:

Product description

Product Parameter:

Air Pressure: 90 PSI

Air Consumption: 4 CFM

Free Speed: 12000 r.p.m

Sander type: Non-vacuum

Colour: Red / Green / Silver

Air Hose ID: 3/8", Air Inlet:1/4''

Two Size Sanding Pad Available(5'', 6'')



What's in the Box:

1* wrench

1*Quick Connector

1*Instruction manual

1*Air Dual Action Random Orbital Sander



About Pneumatic Sanders:

Pneumatic sanders are also called air sanders and run on power generated by an air compressor. Non-vacuum models such as these are not connected to a vacuum system and are used in applications where dust extraction is not a concern.



Using Your Pneumatic Sander:

This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air, the point where the air hose is connected to the tool, when the tool is running with the level fully depressed



Why Choose Valianto's Random Orbital Sander?

Valianto random orbital sanders optimize sanding and surface preparation on wood, metal, fiberglass and composite materials, and many other substrates. Also known as dual action (D/A) palm sanders, these industrial-grade tools rotate the abrasive disc and disc pad in two simultaneous overlapping oval patterns so no single abrasive particle follows the same path twice, producing a random scratch and swirl-free finish ready for paint or varnish. Applied to Construction, Automobile and other fabrication, Manufacuring and repair industries, Mold industry, Woodworking and furniture manufacuring

• 【Packaging Includes】-----1Pcs 5" Air Sander (5/16 x 24 thread Hook & Loop Pads)/ 1Pcs wrench/ 1Pcs Quick Connector/ Instruction manual
• 【Controllable Speed and High Efficiency】-----Built-in regulator for speed control, easy to handle and Can be operated with one hand, highly reduce operators' fatigue while delivering the best performance, igh Speed and Powerful, universal sanding machine, Free speed Can reach 12,000 revolutions per minute, 90 PSI Air Pressure, high strength shorten your working time improve efficiency
• 【Double Rotation Polishing Technology】-----Double rotation grinding method to make the polishing effect more uniform and smooth
• 【Low Vibration】-----Valianto’s Dual Action Pneumatic Sande, Light weight, low height, Precision balanced motor operates smoothly for greater comfort and control, reduce vibration, provide excellent performance
• 【VARIED APPLICATIONS】-----This dual action sander is ideal for auto body, furniture,wood, metal products, widely used for sanding, grinding, polishing and waxing and cutting, etc.

User questions & answers

Question:	Can this be used to cut and polish clear coat on a car, assuming you use the correct cutting and polishing pads
Answer:	Yes. It depends on the dial size of the watches.
Question:	Can I use a 7” attachment? Or is this specifically for
Answer:	Haha,good question.This needs to be used when your watch back don`t fit well after you replace the battery.This item help your watch like an original one. Very professional.
Question:	I am interested in purchasing the “PLM Silver” Dumb question maybe, but what does “PLM stand for
Answer:	Can't tell you about the screw in press, but I've used this several times. It worked great on one of my watches which has a back that is impossible to press in place by hand. If you set it up correctly, it was a breeze to use. Very happy with it.
Question:	Orbit excentricity
Answer:	The watch press does not open watches. It only closes themy. As for the watch press being able to close the Invicta grand lupah, I have no knowledge of that watch, but I am pretty sure it can close it. Unfortunately, my watch press came with no instrucations so I searched YouTube and found excellent instructions.

Product description

For use with all dual-action sanders. Perfect for ATD-2080, ATD-2180 and ATD-2088 sanders. Lightweight, durable and well-balanced for use with hook and loop quick change sanding discs.

• Lightweight, durable and well-balanced
• 10,000 RPM maximum operating speed
• 5/16 inch x 24 threads
• For use with 6 inches hook and loop quick change sanding discs

User questions & answers

Question:	can it be used with cordless drill
Answer:	It does have a flat die. I use it for the back of the watch and fit the face of the watch in the appropriate curved die.
Question:	this pad has holes ? I mean for vacum
Answer:	Perfect
Question:	is this paqd flexableenough to sand small coves
Answer:	I am not sure about watch crystal, but i have did about every thing else with the kit. It is very handy to have a small vise for that 3rd hand. harbor freight. twenty dollars.....
Question:	Can this be directly attached to the porter cable 7424xp for sanding
Answer:	Sure. This is used to push the back plate on or to press in a crystal.But becareful with the force when pressing the crystal.You can see Youtube shows how to use it.

Product description

The Bosch ROS20VSC 5" Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well blended, ultra smooth finish. This tool is designed to allow finish carpenters and cabinet makers to Complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect Speed for whatever task they need to Complete, with an optimal on board system for filtering fine dust.

• Smooth Finish: Pad dampening system designed to eliminate swirl marks on both flat and contoured surfaces
• Easy Disc attachment: Through Bosch's signature Hook and Loop disc attachment system, sanding pads stick to the hand sander, acting like a Velcro adhesion material
• Variable speed Control: Powerful 2.5 AMP motor allows speed to work piece and task matching with ease
• Dust collection: Features a micro filter system for fine dust and trapping particles as small as a 1/2 micron in diameter. Durable and compact, the dust canister shows dust level and easily detaches for mess free tasks
• Kit contents: Includes sanding pad, sanding disc, dampening ring, dust canister, vacuum adapter and carrying case

User questions & answers

Question:	Where could I get replacment filters
Answer:	Thank you for your question. The filters are not available separately it would be a replacement dust canister part #2609199179. http://www.amazon.com/Bosch-Sander-Replacement-Container-2609199179/dp/B002ENHE14/ref=sr_1_2?s=hi&ie=UTF8&qid=1428435615&sr=1-2&keywords=Bosch+2609199179 If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Can this sander be hooked up to a vaccum using standard attachments
Answer:	Yes it can, I hook mine upto a Rigid Shop Vac. However, because of the size of a shop vac type hose I would suggest going into a smaller hose that you would attach to the larger shop vac hose. For your Information, this sander does have a connector to connect to a dust extraction hose instead of the included dust system. This sander does make a lot of dust so going into an external extraction system is a big help.
Question:	My new ros20vsc, set at 6, slows noticeably if i just set it on a suface to sand. is this normal
Answer:	Thank you for your question. The ROS20VSC Orbit sander normally has a slow start, however, if it is for the whole time you are using the tool with the speed of 6, we might need to evaluate it. Kindly contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	What is the difference between this and the ROS20VSK version? Just the carrying bag? Does the 'K' version have anything this one does not
Answer:	Thank you for your question. The ROS20VS is the same sander in both kits. The difference is the ROS20VCS will have a soft canvas carrying bag and the ROS20VSCK will include a hard carrying case. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)

Product features

ROS20VSC 5-Inch Random Orbit Sander/Polisher Kit

The Bosch ROS20VSC 5-inch Random Orbit Sander/Polisher furnishes an optimized combination of pad orbit and rotation that delivers fast removal and a well-blended, ultra-smooth finish. This tool is designed to allow carpenters and cabinet makers to complete their tasks quickly and to exacting standards, without swirl marks. This sander allows users to find the perfect speed for whatever task they need to complete, with an optimal on-board system for filtering fine dust.

Includes

ROS20VSC 5-inch Random Orbit Sander, Soft Backing Pad, Sanding Disc, Vacuum Hose Adapter, Contractor Bag.

Built to Erase Swirl Marks

The Bosch ROS20VSC is designed to eliminate the most common complaint of random orbit sander users, swirl marks on the work piece. It features an integral pad dampening system that helps prevent swirl marks. The tool features Bosch’s signature HookTight hook-and-loop disc attachment. This attachment has over 35,000 long-life hooks that will ensure firm grip of the disc during use. Additionally, the microcellular backing pad is pliable to ensure a smooth, fine finish on both flat and contoured surfaces alike.

Right Speed for the Task

This random orbit sander/polisher includes variable-speed control, so users can demand the exactly right speed for each individual task. The speed is adjustable from between 7,500 and 12,000 opm, with a single speed of 12,000 opm, so operators can dial up or down. The orbit diameter is 3/64-inch, and the tool weighs in at only 3.5 pounds, furnishing remarkable sanding effectiveness in a tool that is straightforward and easy to deal with.

Comfort Comes First

The Bosch ROS20VSC features a comfortable soft-grip top and body in its design, which allows the user to have multiple grip positions. Thanks to this feature, the days of user fatigue and discomfort from a single grip are gone. In addition, this sander produces a low-vibration operation for extended periods of use. Constant response circuitry maintains constant speed under load.

Dust Prevention

This tool has a built in microfilter system that traps particles as small as 1/2 micron in diameter. The microfilter dust canister curtails dust spillback into the sander. This ensures that users aren’t breathing in too much dust on the job. The compact dust canister simply twists off, making the dust level visible and incredibly easy to detach when necessary. The sander is compatible with standard 1-1/4-inch and 1-1/2-inch vacuum hoses or any Bosch vacuum cleaner hose, and it features a dust-sealed switch.

Product description

Compact Design, Light Weight, Low Vibration and Ergonomic Grip for More Comfort and Less Fatigue. 3/16" Random Orbit Assures Swirl Free Finish. Variable Speed Control. 6" Premium Face Pad. Excellent for Pre-Paint Preparation, Sanding, Feathering and Touch-Up Work. Pad size: 6". Orbit: 3/16". Free speed: 10,000 rpm. Inlet: 1/4" NPT. Average air consumption: 2.8 CFM. Weight: 1.65 pounds.

• Working pressure is 90 PSI, free speed is 10,000 RPM, air inlet thread is ¼ inch, NPT hose size is 3/8 inch, average air consumption is 2.8 CFM and minimum air compressor hp needed is 2 HP plus
• Included components: attachments
• Made in China
• Package Dimensions : 7.25 L x 4.75 H x 5.75 W (inches)

User questions & answers

Question:	What size tank is recommended and what psi setting is recommended? I have a 60 gallon
Answer:	I don't know what a crystal glass press looks like but a google search made me believe they are almost the same so the answer is Yes. You find the correct Fitting Dies for your watch, line them up on the Press then squeeze. The first time, I did this I didn't even notice the back already went in
Question:	i purchase this device , I want to Discs the car paint removal and cleaning cars? Appropriate for this device please
Answer:	Yes, it will work. I have used it on tank style watches successfully.
Question:	Is the backer pad bolt 5/16" so I can change to another backer pad
Answer:	I used this tool to close the back on a rectangular Baume & Mercier. That watch had a small lip on the back, on one of the narrow sides where the bracelet attaches, which gave a place to pry with an opening tool.
Question:	i purchase this device , I want to Discs the car paint removal and cleaning cars? Appropriate for this device please
Answer:	Please know the move range is 0.47-2.24 inch.
Question:	Can you turn the light on without running the machine
Answer:	Yes! Just find the size presser that fits onto your parameter ring and press. Voila!
Question:	Dies itthis grinder come with its own stand
Answer:	It worked with my pocket watches which are quite large.