12 best grizzly belt sanders

• A perfect match to your bandsaw or scroll saw this Combination Belt/Disc Sander will shape and smooth right to the line. A 1/3-HP TEFC capacitor start
• Includes single knob tracking and two 2-Inch dust ports
• Approximate shipping weight is 63 lbs

User questions & answers

Question:	The metal sanding disk does not slide far enough back on the motor mount to clear the sides so i can't install the dust guard or the disc table. help
Answer:	Yes. That's why I bought it. 2 caveats though. 1. If you don't clean out the sawdust, it will catch fire. 2. If you allow the steel to get too hot, it will melt the wheels/pulleys. They are plastic. I actually had better luck making knives with the Sears 2in belt grinder.
Question:	Is 42" a common size? Just looking for ease of ordering replacement belts
Answer:	This item does include two grinding wheels.
Question:	Will the motor on this device work with a rheostat type speed control
Answer:	I actually don’t know but I can’t imagine it boring 1Hp. Before you buy, here is my review, so many pros and cons to this unit. I had to mount it on a board coming down from my ceiling. There is so much torque that that when I touched the foot pedal the unit would twist so abruptly that it would pull the shaft right out of my hand! It makes much more noise that my other units, the foot pedal seems spongy. The upside is it has a metal shaft cover which bends very easily and having rheumatoid arthritis it’s more forgiving on my wrist and hand pain. The hanpiece is more comfortable than any other unit I have had. I greased it when it arrived but still noisy and the handpiece can heat up quite a bit with extended use. Would I buy this unit again? Probably not. I would however look for another flex shaft with the flexible metal shaft cover! That part was amazing and since I’m a gold smith and work over 70+ hours a week I have so much less wrist and hand pain.
Question:	can you switch from a wood sanding belt to bevaling belt for grinding metal for like knives
Answer:	Yes you can control the speed with the foot pedal

Product features

1/3 Horsepower Benchtop Combination 1" X 42" / 8" Disc Sander

A perfect match for your bandsaw or scroll saw, this Combination Belt/Disc Sander will shape and smooth right to the line. A 1/3 HP, capacitor-start induction motor powers the 1" x 42" belt and 8" disc through any sanding chore and the cast-iron tilting tables give you the flexibility you demand. Includes single-knob tracking and two 2" dust ports.

Single Knob Belt Tracking

Tables Tilt 45 Degrees Right

Two 2" Dust Ports

Dual Cast-Iron Tables with Miter Slots

Specifications:

• Motor: 1/3 HP, 110V, single-phase, 1725 RPM
• Tables tilt: Left 0°, Right 45°
• Belt sander table size: 6" x 7"
• Disc sander table size: 4" x 10"
• Platen size: 1" x 4"
• Tracking adjustment
• Direct drive
• Two dust ports: 2"
• Takes standards 1" x 42" belts and 8" PSA discs

• 3450 RPM, 3/4 H.P., 10/5 Amps
• Cast iron table, disc and body
• Dual voltage motor pre-wired for 110V
• Quick belt-release mechanism
• Shipping weight approx.: 120 lbs.

User questions & answers

Question:	Replacement belts and discs
Answer:	its for metal or wood
Question:	is the stand included
Answer:	Maybe this will help. The metal sanding disk does not slide on the motor mount. It slides on a shaft. Re- read the installation manual.
Question:	Is it ok to run belt sander without front guard? I like to use the front roller for shaping sometimes
Answer:	42" is the next size up from 30" . 42" is very common
Question:	Is this a practical tool for sanding/grinding metals? Or is it more for woods
Answer:	Sorry to say, but yes. I paid just under 200 for mine. Although I like MOST Grizzly products, this one did not work out as well for me. I was using it to grind blades for knifemaking. It's okay for LIGHT woodworking......but that's about all. I think the JET brand may have something comparable to this one, but probably better quality. More money for sure though. I did buy a 2 inch Belt sander from Sears. A Craftsman, it's a little underpowered, but is good quality. I tend to use it much more. Also, Harbor Freight has a 1in by 30 inch belt sander that I bought one time. It was way cheaper than the Grizzly. But it was okay for light work. If you really want the Grizzly, you might do well to buy directly from them instead of Amazon. I find the prices on Amazon to be higher on average when buying Grizzly products. Good luck!

Product features

3/4 Horsepower Combination 6" X 48" Belt / 9" Disc Sander

Designed for accuracy and efficiency, our popular Model G1014Z offers a quick release system for lightning fast belt changes and a convenient, single-knob tracking control system. Sized to fit the mid to large workshop, the G1014Z offers a single-phase, 3/4 HP motor, shielded bearings on both belt rollers, heavy cast iron table and body, and a rock-solid A-frame stand.

Safety Paddle Switch with Removable Key

Table Tilts 45 Degrees Right

Built-In 2-1/2" Dust Port for Disc and 2" for Belt

Belt Platen Rotates 0 to 90 Degrees

Specifications:

• Motor: 3/4 HP, 110V/220V, single-phase, 3450 RPM, 12A/6A
• Cast iron table, disc and body
• Quick belt release mechanism
• Dual voltage motor prewired for 110V
• Dust ports - 2" for belt, 2-1/2" for disc
• 2300 SFPM belt speed
• Belt driven

Product description

This belt features tough aluminum oxide grain on an “X” weight paper backing. This product has more “body” than other “X” weight products making it well suited for wide belts. While it will not take the abuse of the “Y” weight Aluminum Oxide Belts for Wide-Belt Sanders, the do-it-yourselfer will find it affordable and effective. 43" wide X 60" long. 100 Grit.

• Purveyor of fine woodworking and metalworking machinery since 1983
• Grizzly branded products carry a 1 year limited warranty
• Made in Korea

• Motor: 3/4 HP, 110V/220V, single-phase, 3450 RPM, 12A/6A
• Cast iron table, disc and body
• Cabinet stand with storage locker
• Dual position table
• Dual voltage motor prewired for 110V

User questions & answers

Question:	Are these made on the USA
Answer:	The stand is included. It is flimsy and the holes are not lined up well. Whole thing is flimsy and poorly designed.
Question:	Could you specify the size for the belt and disc diameter please
Answer:	Yes, the sander works nicely without the front guard. I usually have the guard removed and have had no problems, and I use the front roller for shaping as well.

Product features

3/4 Horsepower Combination 6" X 48" Belt / 9" Disc Sander with Cabinet Stand

This is the same great combination sander as the G1014Z, but with a solid cabinet stand for rock-steady performance. A built-in storage shelf also holds plenty of replacement belts and discs.

Cast-Iron Table, Disc and Body

Table Tilts 45 Degrees Right

Built-In Storage Shelf

Belt Platen Rotates 0 to 90 Degrees

Specifications:

• Motor: 3/4 HP, 110V/220V, single-phase, 3450 RPM, 12A/6A
• Cast iron table, disc and body
• Cabinet stand with storage locker
• Dual position table
• Dual voltage motor prewired for 110V
• Dust ports - 2" for belt, 2-1/2" for disc
• 2300 FPM belt speed

• Item may ship in more than one box and may arrive separately
• Although we call this a -Inch Knife Belt Sander -Inch it is actually a very versatile sander with many different woodworking uses
• Auxiliary arbor accepts buffing wheels sanding drums or flap wheels
• Belt can be changed in seconds with quick-release mechanism

User questions & answers

Question:	Does this require more than a 20amp circuit
Answer:	The drive wheel is about 8" in diameter. The other wheel is about 4" in diameter. That's an estimate without measuring it.
Question:	Will this grinder tilt to lay flat
Answer:	No. Taiwan
Question:	Is there an option to buy without motor
Answer:	Marc,The disc has a 9 inch diameter and the belt is 6 x 48 inch. I have attached the grizzly web address below for the sander, it should contains all the manuals and product specifications you need. http://www.grizzly.com/products/Combination-Sander-with-Cabinet-Stand/G1014ZX Just select the PDF you desire from below the price chart.CheersEric
Question:	What is the diameter of the belt drive wheel
Answer:	Yes you can get replacements belts and disc’s. Through Amazon and Grizzly

Product features

1 Horsepower Knife Belt Sander / Buffer

Although we call this a "Knife Belt Sander," it actually does much more than grind and sharpen knives; it has many different woodworking uses. Auxiliary arbor accepts buffing wheels, sanding drums or flap wheels. Belt can be changed in seconds with quick-release mechanism. Belt arm can be fully tilted. Without a doubt, this is the best knife belt sander around!

Quick-Release Belt Tension

Aluminum Rubber Roller

Belt Arm can be Fully Tilted

Auxiliary Arbor Accepts Buffing Wheels, Sanding Drums, or Flap Wheels

Specifications:

• Motor: 1 HP, 110V, single-phase, 14A
• Motor speed: 1725 RPM
• Belt size: 2" x 72"–76" range
• Belt speed: 3600 FPM
• Left arbor: 8-1/2" extension with 5/8" arbor
• Height with belt arm horizontal: 11-1/2"
• Height with belt arm vertical: 39"
• 8" dia. sanding wheel
• Overall width: 29-1/2"

Product description

Grizzly Industrial, Inc. has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network and resulting in lower prices to you. We ship 99% of all orders the same day and with over a million square feet of warehouse space packed with inventory in three strategic locations around the country, your order can get to you within a few days.

• Motor: 2 HP, 240V, single-phase, 9A, 1725 RPM, TEFC
• Precision-ground cast-iron tables
• Table size: 26-7/8" x 12"
• Table travel: 3-3/4"
• Aux. table size: 10" x 11-1/2"

User questions & answers

Question:	What size belt is on this machine
Answer:	Belt size is 6" x 89". Rotation is left to right.

Product features

2 Horsepower 6" x 89" Oscillating Wood Edge Sander

For all-around versatility in a sanding machine, you can't beat our Oscillating Edge Sanders. Not only do you get a large sanding surface combined with an oscillating belt and a large precision-ground cast-iron table for efficient edge-sanding, you also get three interchangeable spindle drums for contour sanding. The edge-sanding table is handwheel-controlled for vertical adjustment and angle sanding is much easier to manage since the sanding belt tilts instead of the table. You'll agree-these Oscillating Edge Sanders are awesome! Also available in a 3 HP option as the model G0564.

Includes Non-Oscillating Spindle Sander

Sanding Belt Oscillates at 52 Cycles per Minute

Platen Tilts Horizontally or Vertically

Guards Open for Extra Long Sanding

Specifications:

• Motor: 2 HP, 240V, single-phase, 9A, 1725 RPM, TEFC
• Table size: 26-7/8" x 12"
• Table travel: 3-3/4"
• Aux. table size: 10" x 11-1/2"
• Aux. table travel: 10"
• Sanding belt size: 6" x 89"
• Sanding belt speed: 3150 FPM
• Sanding belt oscillation stroke: 1/4"
• Drive drum diameter: 7"
• Idler roller diameter: 3-7/8"

Product description

The 1 x 30 Inch Belt, 6-Inch Disc Variable Speed Sander from Rikon is great for working on small craft projects, like home decorations, jewelry, toys, doll furniture, repair work and more. The machine’s small motor is very efficient in driving the belt and disc, so stock removal goes quickly. Variable speed feature lets you ‘dial-in’ the best belt or disc speed for sanding performance on your project’s material. This sander is recommended for light-duty use. The variable speed induction motor provides plenty of power and versatility for sanding. The sander's frame and base are made of sturdy cast metal for extra rigidity. Tracking knobs on the sander ensure the correct positioning of belts on frames. The sander's work tables adjust 0 to 45 degrees with large locking handles for sanding angles. PSA discs apply quickly to their metal discs for instant use. The sander includes a dust Hood and port for efficient dust removal with attached dust collectors.

• Create beautiful small crafts with this 1 by 30-inch belt, 6-inch disc variable speed sander
• Motor is built for efficiency in driving the belt and disc which provides quick stock removal
• Variable speed feature lets you dial-in the best belt or disc speed for sanding performance
• Frame and base are made of sturdy cast metal for extra rigidity
• Tracking knobs allow correct positioning of belts on frames

User questions & answers

Question:	Is there a backer behind the belt or does it rely on just the belt tightness to stay flat
Answer:	Yes I modified mine to use 2x72 belts aswel as having a 8”X2” unitized nylon wheel
Question:	how to use a leather belt
Answer:	I don't know. I purchased this to sharpen knives and therefore also purchased one of those angle-adjustable knife rests. I works well. There is one thing that is disappointing: the motor gets REALLY HOT if it it one for say, more than 20 minutes (even with just the belt on.... virtually no load on the belt). The motor housing needs some type of ventilation ducts, IMO.
Question:	Could I theoretically put a wire wheel insted of a Disc Sander? (can the metal cover be disattached
Answer:	This is a Chinese company. From the website."Contact us: No. 196, Kunyu North Road, Wendeng Economic Development Zone, Weihai City, Shandong Province" & "Bucktools is an old fashioned, American [type] of brand"; "type" being the operative word here.
Question:	Does the work table for the sanding belt tilt
Answer:	I received a sander. No knob . Why are they selling with no knob?

Product description

1" x 30" Belt / 5" Disc Sander #50-151 is great for working on small craft projects - home decorations, jewelry, toys, doll furniture, repair work and more. The machine's small motor is very efficient in driving the belt and disc, so stock removal goes quickly. Recommended for light-duty use.

• Belt Table Tilts from -0Degree- 45Degree
• Belt Tracking Knob
• Safety ON/OFF Switch
• 2" Dust Port Included

User questions & answers

Question:	How powerful is it. Does it bog down when putting moderate pressure against the belt or disk. Also does it run true with little to no wobble
Answer:	1) With moderate pressure, it does not bog down. With heavy pressure it slows a bit, but I have not found that to be problematic. However, so you know, I use it with 1/2 in wide belts, so there would be a bit more drag with 1 in belts. 2) There is no significant wobble. It runs true. 3) The only problem I found was a slightly uneven platen, but I was able to bend it back true.
Question:	Is the motor loud when running with nothing being sanded? How would you compare it to a corded 3/8" drill
Answer:	It's not the quietest sander but if I had to rate the noise level on a scale of 1 to 10 with 1 being the quietest and 10 being the loudest, I would give it an 8 with just the motor running.
Question:	Does anyone know the rpm and amps for it
Answer:	Mine says 2.3 amps and belt speed- 3340 rpm (no load) and disc speed 3350 rpm (no load).
Question:	Can you use this sander to sand metal if you buy the right sand paper or is it just for wood
Answer:	Yes you can use this sander to sand metal. I purchased this sander specifically to sharpen knifes and metal cutting tools, just make sure to use the right sand paper.

Product description

Very popular with knife makers, this knife belt sander/buffer features a cool-running 2" x 72" abrasive belt and an extended buffing wheel shaft for full-access buffing or stropping. The sanding belt can be utilized along the platen, above the platen for free forming, or against the 10" rubber-faced drive wheel. The infinitely adjustable tool holder provides a stable platform for consistent results. This knife belt sander/buffer is ideal for sharpening Extra-Long Lathe turning gouges and chisels too.

• Motor: 1 HP, 110V, single-phase, 14A, 1725 RPM
• Belt size: 2" x 72"-76" range
• Belt speed: 4500 FPM.Power Cord Gauge:16 AWG
• Overall width: 29-1/2"
• All ball bearing construction

User questions & answers

Question:	Who manufactures the Fox sander buffer
Answer:	Tracking adjustment is as good or better than any of my belt sanders. Easy to set and holds well.
Question:	Can it be mounted horizontally to perform a hollow grind
Answer:	It runs on a 14A circuit. That being said, it (like some grinders) needs a running start. You can't just turn it on. Doing so I have found will blow the circuit. You need to spin the drive wheel by hand and then tune it on.
Question:	Does this ship in 2 boxes or
Answer:	The belt arm on the G1015 is designed to tilt vertically or horizontally.
Question:	how dose the belt tracking mechanism rate as far as preformance
Answer:	Not that my husband (for whom I bought the equipment) was aware. He wanted the complete set and that is what we purchased.Deborah Rogers

Product features

Shop Fox Knife Belt Sander/Buffer

Very popular with knife makers, this Knife Belt Sander/Buffer features a cool-running 2" x 72" abrasive belt and an extended buffing wheel shaft for full-access buffing or stropping. The sanding belt can be utilized along the platen, above the platen for free forming, or against the 10" rubber-faced drive wheel. This Knife Belt Sander/Buffer is ideal for sharpening extra-long lathe turning gouges and chisels.

Adjustable Tool Holder

The infinitely adjustable tool holder provides a stable platform for consistent results.

Sanding Arm Adjustment

The sanding arm assembly tilts to a horizontal position. This arrangement is more convenient for certain types of sanding operations.

Adjustable Tool Rest

The W1843 tool rest can be adjusted or removed for a variety of operations.

Range of Applications

The W1843 does more than just sharpen and buff knives. The auxiliary arbor accepts buffing wheels, sanding drums or flap wheels for use in woodworking applications.

Sanding belt

The sanding belt is used to sand wood or metal. We recommend using aluminum oxide sanding belts for wood and silicon carbide for metal.

Product description

This 4.3-Amp Belt Disc Sander from Rockwell is the 2-in-1 that was purpose-built to remove all the splinters and rough edges from the projects of the modern DIY woodworker. The perfect piece to your workshop when you’re ready to start producing professional-quality work. It combines the power of a belt platform and a sanding table with a 6-inch disc for all your shaping and finishing needs. The ½ HP heavy-duty induction motor pumps out 3450 RPM of disc speed and a maximum belt speed of 1700 SFM. The cast aluminum disc table and 0-45° miter gauge give you all the shaping options you need for common finishing techniques like arcs, contours, and curves. And the dust port lets you hook up a shop vac and clear the debris out of the air while you work for better visibility and breathability. At 42 lbs, this sander has a steady metal base that won’t wobble or walk and absorbs vibration. Yet at 22” x 11” x 13” its footprint won’t take up a whole workbench. This product also comes with a 2-year limited warranty, so you know Rockwell stands behind their tools. Remove burs and jagged edges from your wood and lumber with ease and enjoy the results of your handiwork with the 4.3-Amp ½ Horsepower Belt and Disc Sander 2-in-1 from Rockwell.

From the Manufacturer

The Rockwell RK7866 Shop Series 1/2 horsepower belt/disc sander comes with a 4-inch by 36-inch belt sander and a 6-inch disc sander. The belt table tilts 0 to 90 degrees and the cast-aluminum disc table has a tilt range of 0 to 45 degrees. It is also equipped with an adjustable belt tensioning mechanism which makes for quick and easy belt changes. This unit comes with a 45-degree miter gauge, Allen key, belt sander and disc sander.

• [HORIZONTAL & VERTICAL SANDING] The spacious 4” x 36” belt platform raises and lowers from 0-90° to accommodate almost any project
• [BEVEL EDGES] The sanding table adjusts from 0-45° for smoothing out beveled edges—you’ll have the nicest picture frames in the business
• [HEAVY INDUCTION MOTOR] Powerful 4.3-amp motor provides plenty of power to sand down all your woodworking projects
• [EASY BELT CHANGES] Quick-release tension lever lets you easily change out sandpaper grits for different projects
• [SAFETY SWITCH] Prevents accidental starts so you can confidently leave your shop when you’re done for the day and not have to worry
• [WHAT’S INCLUDED] Comes with: 1pc hex key, 1pc miter gauge, 1pc sanding disc, and 1pc sanding belt

User questions & answers

Question:	Can you use the sander for metal
Answer:	Not sure it was a gift
Question:	What is the size of the belt and disc
Answer:	If you are unsatisfied for any reason, you may have a replacement or full refund.
Question:	Is this just a wen brand with different color
Answer:	The Parent Company Woodland Home is based in USA, however it is manufactured overseas.
Question:	What is the size of the belt and disc sander
Answer:	Ross, I use the stencil to layout the letters (words), with a pencil on the wood. You can then burn the outlines, or fill between the burned lines.

Product features

Rockwell Belt/Disc Combo Sander

With a belt platform that adjusts from 0 to 90 degrees for horizontal and vertical sanding and a sanding table that adjusts from 0 to 45 degrees for sanding beveled edges, the Rockwell Belt/Disc Combo Sander gives you the best result every time. Woodworking will get a lot easier with the Rockwell Belt/Disc Combo Sander.

A Heavy Duty Induction Motor

You will be able to make arcs, curves, contours and more with the Rockwell Belt/Disc Combo Sander. This tool is built with a 4.3 amp heavy duty induction motor for seamless, hassle-free and dependable performance.

Even after several projects and application, this sander will certainly go strong as it is built to be durable and efficient. This also comes with a quick-release belt tension lever for simple belt changes.

• Sanding belt and disc were directly driven by the motor shaft, maintenance-free, you don't have to adjust the belt tension, change damage belt like before
• Motor direct-drive design can increase 25% sanding efficiency than the traditional design. 3/4 HP total enclosed induction motor supplies silent but powerful output
• The belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work-pieces. Quick sander belt replacement design & humanized track control
• Sturdy cast aluminum base with rubber foot prevents vibrations. 2 dust ports allows a dust-free operation when connecting with a dust collector. To ensure a better experience, we suggest matching with our Y-Fitting Hose
• Two-in-one sanding machine includes both a 4 x 36-inch belt and an 8-inch disc. Angle adjustable work table with miter gauge used on both sanding disc and belt

User questions & answers

Question:	I see in the description this tool is intended for wood, what would happen if metal is used
Answer:	The sanding belt and disc is what is intended for wood. Get a metal sanding belt/disc and you will be good to go!
Question:	What is the country of origin
Answer:	China. But it works well. The only problem is the dust port on the belt sander. It’s next to impossible to plug a vac into it when it’s in the upright position as it’s generally pictured. You have to jury-rig a flexible hose to the sander to which you can attach a vac hose.
Question:	Is the dust port removable
Answer:	The dust ports are fixed on the machine and two universal size reducers( 1-3/8 In O.D) are connected to the outside of the dust ports.
Question:	I wanted this model for sharpening lawnmower blades and wondered,if it will do the job
Answer:	I use a 4x36 with 60 grit zirconia belt to sharpen my mower blades. Iin my opinion it is far superior to the angle grinder and flap disk method, and the hand held on a bench grinder method. It is faster, more precise, and more controllable than those alternates. It leaves the best looking edge I've ever put on a mower blade.

Product features

Are you looking for a versatile and reliable sander?

BUCKTOOL Belt Disc Sander is easy to polish all of the jagged edges and splinters on your wood and lumber and make it smooth. It is an idea for fine wood sanding & polishing.

Powerful motor

This sander was directly driven by a 3/4 HP induction motor, the motor provides enough power for small and large sanding operations on various materials.

Angle Adjustable

Angle adjustable work table with miter gauge can be used on both sanding disc and sanding belt. Sanding belt tilts up to 90 degrees vertical.

Maintenance Free

This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before.

Sanding disc protection during shipment

Few customer concern about the wobble of disc, this was 100% controled in factory , but it will deform when facing terrible delivery . We have added a heavy steel cover to protect the disc sander for new delivery after Nov/ 2019 .If you received a machine with wobble disc , pls don't hesitate to send email to us,We will give you a satisfactory service！

Horizontal&Vertical Sanding

The belt can work at the horizontal or vertical position, the belt comes with a large aluminum table which can adjust from 0-45 degrees.

Upgrade two work tables for both disc and belt

10.4 x 5.9-IN Cast Aluminum table tilts from 0 to 45 degrees for disc bevel sanding.

6.3 x 7.5-IN Aluminum table tilts from 0 to 45 degrees for belt bevel sanding.

Directly Driven

Sanding belt was directly driven by the 3/4 HP induction motor, a 25% sanding efficiency increase than the traditional design. And no need to worry about replacing the driving belt again!

Product description

Voltage: 110V

• Use vertically or horizontally. Tilt table, 5" contact wheel and removable platen.
• Uses 2" x 48" belts.
• Motor: direct drive 1/2 HP, 1 PH and switch
• Speed: 3,450 RPM
• Full hinged guard for quick belt change.

User questions & answers

Question:	Has anyone used a 1 inch sanding belt with this machine
Answer:	On a scale of 1-10, I would put it's loudness at about a 4 or 5. It's not exactly 'quiet,' but I can play music on my shop speaker at a reasonable volume, and still be able to hear it while sanding/grinding.On a related note - this is an AMAZING sander! It's a little on the pricey side, but worth every penny. I've done precision work on it with everything from hardwood to bone/antler, to high-carbon steel (scale and all)
Question:	are you able to tilt the sanding assembly to be flat, or close to it
Answer:	Shop Fox is the manufacturer. It's made in China but I love mine. I use it for knife making and it is a great, cheap entry level 2x72 grinder. Bonus, you get a buffer at the same time. It's super easy to change the belts and the buffer wheels. You just need to get some good quality belts and some 6 inch wheels. The work rest is small so I modified mine and made it larger. It has plenty of power.
Question:	Is this machine good to use for grinding knife bevels? If it is, is it good for long term grinding
Answer:	Yes it can be mounted horizontally.
Question:	How loud is this sander on a scale of
Answer:	It ships in 2. I had to reship to get both