14 best flex angle grinders

Product description

The LE 14-11 125 is designed for the professionals needs. It is the variable speed version of the L 14-11 125 and can be adjusted for a no load speed of between 2800 RPM and 11500 RPM. Its safety features include a soft start system, reload protection and restart protection. In addition, its tool free adjustable guard makes it easy to adapt for whatever the job requires. The tools newly developed long-life motor improves the service life of the brushes, which perform up to 40% better in the test than comparable tools from other manufacturers. It also has numerous safety features.

• Soft start with microprocessor control.
• Highly efficient and resilient motor for more power output.
• Tool-free adjustment of safety guard.
• Long-life motor with highly improved carbon brush lifetime.
• Variable-speed 1400 watt angle grinder, 125 mm.

Product description

HOT-6mm Rotary Angle Grinder Tool Flexible Shaft Accessories, Electric Grinding Drill Special Drill Chuck Handle

Application: Connect the rotating tool for easy carrying

Name: Drill chuck handle

Material:metal

Clamp size: 6mm

Package Contents:

1 * soft shaft drill chuck accessory

1 * black key tool

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• Advanced handle: Reduces vibration to prevent fatigue and gives a better grip for greater maneuverability & high speed
• Wide application: Apply to polishing, engraving, drilling, cutting, grinding, carving, shaping and sanding when flex shaft works with straight die grinder.
• High working efficiency, not easy to heat. flexible and endurable
• Material: Aluminum alloy; Plastic; The handle and the chuck are exquisitely durable, corrosion resistant and resistant to rust.
• Adjustable Size: The crane grinder handle + key is a special replacement for 380W and 780W crane grinders. The clamping range of the chuck is 0.3-6.5MM.

User questions & answers

Question:	Will this unit fit the flex shaft of the Harbor Freight grinder / carver
Answer:	The answer is No, it won't work for that the linoleum works as a barrier between the moisture meter and the wet wood underneath the linoleum the only way it would work is to poke a hole through the linoleum then it would work. thank you for your question.
Question:	Does this work with Dremel
Answer:	Most of the species cut for firewood do not appear on the list either. I have found that the reading doesn’t change a whole lot as I change the calibration so I just pick one and consider the result a ballpark number. I’d love to have it if there is a more comprehensive list out there though.
Question:	Will this work for my American foredom not a European one
Answer:	Dear Customer, For more accurate measurement, the two pins need to be inserted into the material. The sensor is more calibrated for the resistance of wood and soft surface. So, it cannot be used on concrete foundation. Thank you for your question.
Question:	Is this handpiece compatible with my foredom flex shaft
Answer:	It can detecting wood and metal stud up to 3/4 (0.75) inch

Product description

Flex Cut Off Wheels- For Cutting Metal And Steel -4 ½ Inch To Use With Angle Grinders - 4.5"X 1/25 Max 13300 R.P.M 80M/S- 10 Pack By Katzco

Trying to get a grinding job done but don't have what you need to do it?

Well look no further! Katzco's cut off wheels will take care of your metal or steel cutting needs

Package contains: 10 pieces 4.5"x 1/25" flex cut off wheel for cutting metal and steel

But not to be used for or any heavy duty concrete cutting.

Made to use with your angle grinder or high speed cutter,

wheel design for fast burr free cutting easy and smooth constructed of 2 bonded sheets of fiberglass mesh for durability and safety

Spend your money for the good ones, katzco will get yousatisfied get yours today Try it, totally risk free! If for any reason you decide you don't like it, just send a simple email and get a full refund!

Absolutely no questions asked, so you have nothing to lose, click add to cart now

• PACKAGE CONTAINS: 10 pieces 4.5"x 1/25" flex cut off wheel. Designed for cutting metal and steel, but not to be used for any heavy duty concrete cutting.
• HIGH QUALITY: Constructed of 2 bonded sheets of fiberglass mesh for durability and safety Tough aluminum oxide abrasive is continuously exposed during use to maintain aggressive cutting edge
• DURABLE AND SAFE: Designed for use with your angle grinder or high speed cutter, wheel design for fast burr free cutting easy and smooth
• CHECK US OUT: When it comes to purchasing your tools, you have plenty of options. However, a reputable company that cares about you and your project will help you experience a better result. Katzco has a large variety of tools, accessories and supplies to meet your immediate needs and your needs in the future
• SATISFACTION GUARANTEED: Katzco will make sure that you will be satisfied with the cut of wheel you buy from us. You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We care about only putting out high quality products that satisfy your needs. If there is anything you need that we don’t offer, we go and find the best for you.

User questions & answers

Question:	What is the size of the hole in the center? For what size arbor
Answer:	The stud finder works It finds studs, metal, electric lines water pipes (no pvc) through walls, floors, ceiling etc.
Question:	is the outside diameter------what is the inside diameter of mounting hole? this is Is important for fitment
Answer:	Yes, lightning signs will appear when the product senses an electric field signal in the wood detection mode.
Question:	why are they called "flex cut off", do they have any actual flex to them
Answer:	Please send us through your order number and we will send it to you.
Question:	Will these cut through thick steele
Answer:	Seriously doubt since it was off an inch or two in a sheet rock ceiling.

Product description

Walter FLEXCUT Mill Scale Flexible Grinding Wheel is the perfect choice if you are looking for an abrasive tool that delivers premium performance on curved or uneven metallic surfaces. The grinding wheel is primarily designed to remove mill scale from hot rolled steel and can work on all ferrous and non-ferrous metal surfaces without clogging or loading. The abrasive finishing wheel can be reliably used for removing rust, scale, paint, and other gaskets, leaving a clean and smooth surface finish. Delivering a vibration-free performance, this grinding abrasive wheel works with utmost flexibility. With added features like fast removal rate and a cool cutting action, the FLEXCUT grinding Wheel becomes the most suitable accessory in grinding, blending, and surface cleaning or preparation tasks.

• Features: the flexible abrasive wheel is primarily used for grinding different metal surfaces. This grinding wheel effectively removes mill scale and leaves a smooth surface finish without gouging
• Diamond-Cut Pattern: the finishing wheel with its deep diamond cut pattern offers more flexibility and even blends weld on the metallic surfaces. This surface finishing wheel runs at a high rotational speed for enhanced performance
• Applications: the abrasive grinding wheel works efficiently on all ferrous and non-ferrous metals without clogging. This flexible grinding wheel works suitably well on heavily rusted plates, aluminum or galvanized metal, and painted material
• Cool Cutting: the abrasive cleaning wheel offers fast removal rate and cool cutting action. The cleaning wheel works with minimal vibration for maximum operator comfort
• Specifications: this grinding abrasive wheel with 4-1/2 in. diameter and A-36-FLEX grit composition features a 5/8 in. arbor to ensure easy and secure mounting on grinding tools. The Type 29 abrasive wheel performs at maximum speed of 13300 rpm

Product features

Walter Flexcut Mill Scale Premium Performance Flexible Grinding Wheel (Pack of 25)

Walter FLEXCUT Mill Scale Flexible Grinding Wheel is the perfect choice if you are looking for an abrasive tool that delivers premium performance on curved or uneven metallic surfaces.

The grinding wheel is primarily designed to remove mill scale from hot rolled steel and can work on all ferrous and non-ferrous metal surfaces without clogging or loading.

About Walter Surface Technologies

Walter Surface Technologies has been providing high productivity abrasives, power tools, tooling, chemical solutions and

environmental solutions for the metal working industry.

Founded in 1952, Walter Surface Technologies is now established in 7 countries in North America, South America and Europe. As a company, we continuously design and develop new tools to increase productivity and safety in the metal fabricating and finishing industries.

Product description

DEWALT DCG413B 20V XR Brushless 4.5-Inch angle Grinder features a DEWALT Brushless motor which delivers up to 57% more run time over brushed. This single speed motor offers a No load speed of 9, 000 max RPM's. It has a Paddle swith to operate; the brake is engaged as soon as the Paddle switch is released, bringing the wheel quickly to a stop. This tool also offers a 2-Position side handle for user comfort and convenience. Specifications: wheel diameter 4.5 inches, Arbor size 0.625 inches, metal motor bearings, Paddle switch, single speed. *This is a baretool item, battery sold separately. Includes: 1) angle Grinder.

• Dewalt Brushless Motor: Delivers Up to 57 Percent More Run Time over Brushed
• No Load Speed: Max 9, 000 RPMs
• Blade brake: brake engaged when paddle switch is released, bringing the wheel quickly to a stop.Max Watts Out:850 W
• Warranty: backed by DEWALT 3 year limited warranty
• Battery & Charger Sold Separately
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is this variable speed
Answer:	Yes, that's exactly what I use them for. Polishes 1080 and 1095 high carbon to a mirror finish.
Question:	How is the paddle switch on this compared to the trigger switch like all the other cordless grinders
Answer:	Yes, but soft metals. Aluminum, brass, copper, silver, gold. May not do what you want with stainless steel or high carbon steels.
Question:	Although the product description says it's ideal for electricians, do you think I could cut concrete if I were to use a 4 1/2 in diamond blade
Answer:	I found after 1000 grit, buffing with a good compound gave me a mirror finish. And I used a wet stone to sharpen. 1000 grit was the highest I used in sandpaper.
Question:	can I use 20V MAX Lithium Ion 5 AH battery for this tool? 5 AH is the correct one or no
Answer:	Yes! Silicon Carbide is recommended for use on stone.

Product description

The FLEXVOLT 4-1/2 inch - 6-inch (115 mm.-150 mm.) Grinder Tool with Kickback Brake is maximized for power and durability. DEWALT cordless grinder delivers 13 amp power as compared to the D28144N with the portability and convenience of cordless through revolutionary FLEXVOLT technology by DEWALT. Purchase battery separately.

• Angle grinder has 13-amp motor equivalent power
• Brake of DEWALT angle grinder engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2-inch x 1/4-inch bonded abrasive wheel, non-hubbed)
• Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder, and shut the grinder off.
• Anti-Rotation E-CLUTCH System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.
• 9,000 RPM Speed allows the use of up to 6-inch wheels
• Allows for up to 6-inch wheel size for both cutting and grinding applications.

User questions & answers

Question:	Can a 7" wheel fit this tool without the guard.a7" diamond wheel and shroud
Answer:	No, it is a magnet that will locate a screw or nail. It is a great tool for locating studs
Question:	What "spindle size 5/8 11" means? I don't understand
Answer:	This finder has a very strong magnets to find the nails or screws used to attach sheetrock. It is extremely great at finding metal objects. I keep two; n my tool pouch. One for finding screws in studs and one to hold all my driver hits since the magnet is so strong it will hold many bits together so I have them all together to choose from
Question:	Does this come with a carring case
Answer:	I believe it’s made in China.
Question:	Can I use this to trim tree branch by using "makita a-95037 tct saw blade 5-3/8-inch by 5/8-inch by 30t" or similar saw blade? Any safety issue
Answer:	I'd say yes. That magnet is really strong. Maybe not with a lot of padding but that is definitely an industrial magnet for that tiny size

Product features

4-1/2” – 6” Grinder with Kickback Brake

● 13 Amp Equivalent Power as compared to D28144

● Power to Cut and Grind

● Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off.

● Brake slows wheel to a stop when trigger is released

● Brushless Motor designed to deliver the run time and performance for demanding applications.

● Two Stage Trigger helps to reduce accidental startup

● 4-1/2” to 6” Wheel Capacity

INTRODUCING FLEXVOLT

The world’s first battery that automatically changes voltage when you change tools.

THIS IS NEXT LEVEL POWER

The FLEXVOLT system brings you the future of power with cordless tools unlike anything you’ve ever experienced. With a highly innovative voltage-changing battery and a lineup of groundbreaking 60V MAX* and 120V MAX* tools to match, FLEXVOLT tools have the power that will change the way work gets done.

THE TECHNOLOGY THAT GETS IT DONE

The FLEXVOLT battery’s ability to automatically change between two voltages gives users a serious advantage when it comes to efficiency. It’s the battery that not only powers, but improves the run-time of our DEWALT 20V MAX* tools, so you don’t have to invest in a whole new system. It’s the battery that brings the power of corded to a new lineup of 60V MAX* and 120V MAX* DEWALT tools so you can finally work on a fully cordless jobsite. This revolutionary battery will change the way things get done.

ONE BATTERY. TWO VOLTAGES.

The FLEXVOLT battery is backwards compatible with our 20V MAX* tools so you get up to 4x the run-time. And because the FLEXVOLT battery is the only battery that automatically changes voltages when you change tools, you can slide the battery into a whole new lineup of 60V MAX* and 120V MAX* tools from DEWALT.

Product description

The DeWALT DWP849X 7-Inch/9-Inch Variable Speed Polisher has a powerful, 12.0-Amp, all ball-bearing construction motor for long life and durability. It has electronic control that maintains specified speed under load delivering the desired finish results. The conveniently located variable speed dial lets user set maximum speed from 0-600/3500 rpm for different materials and applications. It also has a variable speed trigger allows user to control speed from 0 to dialed maximum setting easily. It has heat-treated, precision-cut steel gears for smooth operation and external brush caps for easy servicing. The large spindle lock button allows for easy and quick backing plate changes. It also features a Wool Ingestion Shield that eliminates wool ingestion increasing tool life and reducing service costs and a non Mar Rubber Gear Case Cover that reduces surface imperfections and improves gripping surface. Includes Polisher, hook and loop backing pad bale and straight side handles.

• Powerful, 12.0 Amp, all ball bearing construction for long life and performance for the most demanding applications
• Electronic module maintains specified speed under load delivering better finish results
• Conveniently located variable speed dial lets user set maximum speed from zero to 600/3500 rpm for different materials and applications; Spindle Thread: 5/8 inches 11
• Wool Ingestion Shields eliminates wool ingestion increasing tool life and reducing service costs
• Non Mar Rubber Gear Case Cover reduces surface imperfections and improves gripping surface

User questions & answers

Question:	can you use a 10 pad
Answer:	Yes that’s basically what I use is 10” polishing pad for aluminum and stainless steel. I use a 6000 rpm for cutting then use this one for final stage of polishing since it’s a lower rpm at 3500. I like this one for final stage as I can turn it down to 2000 rpm for a final mirror finish.
Question:	will a 4 inch pad be compatible
Answer:	Can, I use a 5 inch. I usually buy DeWalt products but this one I don't really recommend. I would go for the Makita. This polishe has a problem with 800 then to 600. It's very troublesome with product flying.
Question:	Hi, what thread does this machine have
Answer:	5/8" - 11 spindle threadAdditional Information: SpecificationsAmps 12.0AmpsMax Watts Out 1250WNo Load Speed 0-600 / 0-3,500rpmSpindle Thread 5/8"-11Spindle Lock YesTool Length 18.5"Tool Weight 6.7lbs
Question:	I have this machine...what do i need to do to learn how to correct paint to a great finish
Answer:	Go to the junk yard and buy several panels. Use the machine for about 200 hours. (No, I'm not kidding). THEN, you can use it on an actual car. Not saying that you can't use it before then without screwing something up bad, but don't come near my car with it! Seriously, watching Youtube and all is great but do not use this without some practice on things that won't matter if you screw up. Also, learn the difference between things you do with this that you can fix (like with a random orbital) and things you do that you can't fix.

Product description

Dremel 575 Angle attachment

From the Manufacturer

Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment. The quick connect system makes it easy to attach the 575 to the Dremel rotary tool, and the coupling system allows you to rotate the right angle drill attachment on the tool to achieve a perfect grip. Ball bearings and bevel gears provide smooth and cool operation. The right angle attachment will handle a full 30,000 RPM and works on Dremel 4300, 4200*, 4000, 400, 3000, 300, 398, 395, 200, 285, 100, 275, 8220, 8200, 8100, 800. *Compatible with the 4200 when used with the 4200 Attachment Adapter found in your Dremel 4200 kit.

• Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool
• This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas
• Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
• Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
• Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
• Load rating 180 lbs.

User questions & answers

Question:	Does this fit on the Harbor Freight rotary tool
Answer:	Yes it says on Amazon the Fordom hand piece fits the Harbor Freight unit
Question:	Is there a benefit to having both the flex shaft attachment and this since it seems both can be used to access hard-to-reach areas
Answer:	I know it works with the Foredom flex-shaft tool but it's a tight fit and requires some work on the handpiece side of the connection to the flex-shaft to increase the diameter of the opening a few thousandths of an inch. As for the Dremel, if a Foredom handpiece will work on the Dremel flex-shaft, then this will fit but may require the same work to enlarge the handpiece connector opening.
Question:	Anyone tried this on the WEN rotary tool
Answer:	It did work on my 30 year old foredom
Question:	It is compatible with Dremel 4000 Rotary tool
Answer:	I have a Foredom SR motor, and this handpiece works fine with that. I use the Foredom quick change handpiece most of the time, but I find that this handpiece is nice to have around if I want to bits with a shank larger than 3/32”.

Product features

Right Angle Attachment: 575

Flex Shaft: 225-01

A true must-have accessory for all hobbyists and do-it-yourselfers, the Dremel 225 Flex Shaft Attachment has a flexible, 36-inch shaft that attaches easily and adds an improved level of versatility to your project capabilities.

Work Station: 220-01

Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press.

Plunge Router: 335-01

Turn your Dremel rotary tool into a mini plunge router and cut perfect decorative edges, straight slots or rout freehand. Plunge feature lets you start your cut in the middle of your work piece.

Shaper/Router Table: 231

Gain the flexibility and precision you need to shape, detail, and sand a variety of soft and hard woods with the Dremel 231 Shaper/Router Table.

Detailer's Grip: A577

The handy Dremel Detailer’s Grip attachment is a quick and easy to use extra support for any rotary tool having a threaded nose piece. It transfers the weight of the tool to the palm of your hand for improved tool balance and control.

Sanding/Grinding Guide: A576

Stabilizes a handheld tool by providing an edge guide or serves as a work platform when the tool is mounted in a secure position.

Shield Kit: A550

Increased comfort from debris and sparks during cutting, grinding, sanding, and polishing applications.

Sharpening Kit: A679-02

Give your go-to tools a new lease on life. The A679-02 Sharpening Kit includes three of our most-popular attachments: the Dremel chain saw sharpener, lawn mower sharpener, and garden tool sharpener.

Multipurpose Cutting Kit: 565

Allows for sturdy controlled cuts in a variety of materials; including drywall, laminate, fiberglass, plastic and vinyl siding.

Tile Cutting Kit: 566

Turn your Dremel tool into a high-powered rotary tile cutter. Ideal uses include cutting around fixtures or plumbing during bathroom or kitchen tile installations and creating mosaics.

Not appropriate for cutting floor tiles.

Grout Removal: 568

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel rotary tool into a powerful, electric grout removal machine. Best of all, the attachment's unique shape keeps the bit at the perfect cutting angle and keeps it centered between the tiles.

Right Angle: 575

Enhances the versatility of your Dremel rotary tool by allowing you to get into hard-to-reach areas. Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 Right Angle Attachment.

Mini Saw: 670

A unique, innovative rotary tool accessory that allows you to cut through wood and wood-like materials as never before.

Circle Cutter and Straight Edge Guide: 678-01

The simple way to cut circular holes in many types of materials. Convenient measurement guides in both inches and centimeters, so you can out the right-sized circle every time.

Dust Blower: 490

Offers an innovative solution for improving visibility when using your Dremel rotary tool. By removing fine debris from your line-of-sight, our small air blower is great for detailed projects, sanding, engraving, and carving.

Multi-Vise: 2500-01

Helps you secure your project or free up a hand for extra control when using your Dremel rotary tool. The removable cushioned jaws help protect delicate work pieces while providing a firm, steady grip.

Product description

Features:



The handle and the chuck are exquisitely durable, corrosion resistant and resistant to rust.

Adjustable Size: The adjustable clamping range of the chuck is 0.3-4mm.

Application: Suitable for high precision engraving, grinding, polishing design, grinding.

Easy to use: Easy and quick to use, you can take them as a convenient and economic spare parts.



Specifications:



Application: Connect the rotating tool for easy carrying

Material:Aluminum Alloy

Clamp Size: 4mm



Package Included:



1 x Soft Shaft Drill Chuck Handle

1 x Orange Key Tool



Only the above package content, other products are not included.

• Suitable for HERIS 380W flexible shaft grinder rotary tool. A must have piratical replacement!
• Material: Aluminum alloy; Plastic; The handle and the chuck are exquisitely durable, corrosion resistant and resistant to rust.
• Advanced Handle: Reduces vibration to prevent fatigue and gives a better grip for greater maneuverability and high speed.
• Wide application: Apply to polishing, engraving, drilling, cutting, grinding, carving, shaping and sanding when flex shaft works with straight die grinder.
• Adjustable Size: The crane grinder handle + key is a special replacement for 380W crane grinders. The clamping range of the chuck is 0.3-4mm.

Product description

With up to 30% more power than the DCG414 60V MAX* Cordless Grinder, this FLEXVOLT 60V MAX* Cordless Grinder adds even more power to our line of powerful grinder tools. This DEWALT cordless grinder is part of our PERFORM & PROTECT product line with Kickback Brake and the Anti-Rotation E-CLUTCH System. The grinder tool also delivers 13-amp motor equivalent power with a no-load speed of 9000 rpm.

• Angle grinder has 13-amp motor equivalent power
• Metal grinder features 9000 rpm no-load speed for applications with 6-inch grinder wheels
• Brake of DEWALT angle grinder engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2-inch x 1/4-inch bonded abrasive wheel, non-hubbed)
• Kickback Brake engages when a pinch, stall, or bind-up event is sensed. The electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
• E-CLUTCH activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
• Up to 30% more power vs the DCG414

User questions & answers

Question:	Is included charger dcb1106 rapid charger
Answer:	4.5inch
Question:	Is it variable speed
Answer:	7/8” is the ID
Question:	where is the variable speed control You say it has and why isn’t it mentioned as 0 to 9000 RPM
Answer:	No,no flex of any appreciable degree that I can determine. In fact I'd avoid any attempt to "flex" them to create a tight curve or radius. A guard, gloves and appropriate eye-wear are definitely a must when using ANY cut off wheel.
Question:	Included charger dcb1106 in this kit dcg418x1 is rapid charger
Answer:	I have cut through 1/4 inch just fine, probably would cut thicker

Product description

High quality alumina particles are evenly distributed and with heavy-duty vulcanized fiber backing. Durable, long life with high stock removal. Rubber backing pad with lock nut features. Rubber material is flexible and durable. 5 / 8 "-11 thread is suitable for most angle grinder. For a similar price, you'll get three different grit discs and a rubber backing pad. Save your time and money! Suitable for all 4.5 "angle grinder with 5 / 8 "-11 thread. Uses include strip, grind, debur, and polish. The package includes 10 pieces of each grit: 24 / 60 / 120, and a rubber backing pad, 31 pieces in total.

• 【High Quality Fiber Disc】High quality alumina particles are evenly distributed and with heavy-duty vulcanized fiber backing. Durable, long life with high stock removal.
• 【Rubber Backing Pad】Rubber backing pad with lock nut features. Rubber material is flexible and durable. 5 / 8 "-11 thread is suitable for most angle grinder.
• 【Economical Choice】For a similar price, you'll get three different grit discs and a rubber backing pad. Save your time and money!
• 【Important Reminder】Improper operation may cause the backing pad to fall off during operation. Please turn the backing pad thread completely into the screw of angle grinder to ensure that it is firmly installed before use, so as to avoid unnecessary loss. Thank you for your cooperation!
• 【Package Include】The package includes 10 pieces of each grit: 24 / 60 / 120, and a rubber backing pad, 31 pieces in total.

Product description

The small cordless angle grinder has a brushless motor that elongates motor life and requires no time changing out worn brushes. The wheel stops within 2 seconds or less. DEWALT cordless grinder comes with Kickback Brake engaging maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback, and will shut off for further protection.

• Brushless motor of the angle grinder requires no brush changes.
• DEWALT grinder's brake stops wheel in 2 seconds or less on average
• Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off.
• Features E-Switch Protection - When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool.
• Two stage trigger requires two actions to activate tool.

User questions & answers

Question:	How many watts is this model
Answer:	A 7" Wheel should not be used on the DCG414B. The DCG414B allows for up to 6" wheel size for both cutting and grinding applications.
Question:	How long does the battery last during continuous use
Answer:	This would be the information needed to purchase the correct size wheel. DCG414 has a 5/8 inch diameter shaft, 11 threads per inch.
Question:	Does this come with two batteries
Answer:	No, it does not come with a carrying case.
Question:	How long is the bag? Does it allow for storage of the tool with a 6Ah battery fitted and of a few extra grinding wheels as well
Answer:	Did you think that up on your own or did someone suggest it to you? It is a cordless GRINDER! Can you think of any possible safety issues? The Dewalt 60v lineup is not cheap, so I imagine that you have the means to buy or rent the appropriate tools for the job. If renting seems like a waste, then please check out Harbor Freight for an inexpensive tool for cutting branches. They have an inexpensive chain saw if the branches are large and an inexpensive extendable electric pole saw if the branches are smaller. If you spare yourself one fall off of a ladder, it will be worth it.

Product description

Bosch MG0450 4-1/2-Inch Sander Backing Pad with Lock Nut.

From the Manufacturer

Bosch MG0450 4-1/2-Inch Sander Backing Pad with Lock Nut

• Measures 4-1/2-inches
• Rubber backing pad with lock nut features
• Backing pads fit most major brands of angle gringers
• The maximum RPM is 12,500
• Sold individually

User questions & answers

Question:	Is tihs a flexible rubber to allow bending for contours
Answer:	Never heard about these two packages. I think it comes in a single package (bare attachment). When I bought couple of months ago it was in a single package.
Question:	Does this snap onto the grinder or can it fall off without the locking nut to hold it in place
Answer:	Both have their uses. The angle attachment allows you to use it like a angle grinder. The head is able to lock into several different angles.
Question:	will these fit with the guard
Answer:	No it is not compatible.
Question:	What is the diameter of the center hole
Answer:	Yes, that is the tool that I am using it with

Product features

Bosch MG0450 4-1/2-Inch Sander Backing Pad with Lock Nut

Bosch offers a complete line of cutting, blending and grinding wheels for metal, concrete, asphalt, stainless steel and pipeline applications. Bosch's innovative range of angle grinders are perfect for professionals seeking maximum power for work performance. The backing pad brings high versatility; fits most angle grinders.

• ❤Delicate Valentine's Day Gift for DIY Lovers，Husband, Boyfriend
• Professional Flex Shaft Grinder Set: Our flexible shaft rotary tool is equipped with a powerful and stable 380W motor, which can provide the speed of 0 to 24000 RPM. This rotary engraver machine is ideal for large-scale work that cannot be completed by mold grinder or rotary tool. Which can enough for limitless purposes from your DIY furniture remodeling to intricate automobile repairs and expert jewelry making.
• Practical & Precise: We offer an easy-to-operate rotary carver that reaches the impossible corners and angles for your convenience. The lightweight, reduced vibrations, and hanging design make this flexible shaft smooth and easy to maneuver in your backyard, garage, or workshop.
• Wide Compatibility: The stable and convenient three-jaw chuck for the jewelers tools accepts accessories from 1/8",  3/32", 1/16",  1/32", 1/64", 5/32'' to enhance versatility. Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure.
• Comfortable Stepless Speed Foot Pedal: Our rotary tool kit includes a foot pedal for the added comfort of your hands during work. The ABS plastic foot pedal for flex shaft rotary tool is more secured than any metal variant due to its safety-oriented material which prevents heat production or transfer.
• Multi-Purpose Rotary Tool Kit: This high-performance rotary tool kit is extremely useful for cutting, drilling, and polishing in small and delicate areas. These sanding power tools are sensitive enough for glass engraving and also perform high torque operations like pearl drilling smoothly.

User questions & answers

Question:	Comes with the rotary tool accessories the same as Dremel
Answer:	Hi, Dear Customer Thanks for your asking. Yes, these bits are interchangeable with Dremel bits. The 130Pcs rotary tool kit has hss cutting discs, cutting off wheels, felt wheels, sanding drums as the same as the dremel tool, they can cutting, polishing, drilling, carving. Best Regards GOXAWEE TOOL
Question:	What material is the handle of the flex shaft made of
Answer:	Hi, Dear Customer Thanks for your asking. Our hand piece of flex shaft is made of stainless steel，not overheat, provide more control and comfort for extended use. Best Regards GOXAWEE TOOL
Question:	Is it possible to polish the industry model
Answer:	Hi, Dear Customer Thanks for your asking. Yes, it can polishing plastic, metals, jewellery and models, etc. Best Regards GOXAWEE TOOL
Question:	What diameter shank size bit does it accepts
Answer:	Hi, Dear Customer Thanks for your asking. This flex shaft rotary tool accepts the size of shank not to exceed 5/32''. Best Regards GOXAWEE TOOL

Product features

GOXAWEE Flex Shaft Rotary Tool, with High Preciesion 3-Jaw Chuck, Stepless Foot Pedal and Various Accessories ( 131Pcs )

A highly customizable wood carving power tools set destined to instantly become your go-to kit for every arts and crafts project. Whether you are new in the DIY club or you are a professional jewelry maker, you will absolutely love this flex shaft grinder.

380W Flex Shaft Grinder Motor

The high longevity motors offer a wide speed range of 0-24000 RPM for the rotary tool flex shaft with high stability and precision for elaborate work. The powerful 380W motor turns bits at high speed with high concentricity of the flexible shaft carver and a heat vent prevents the machine from heat dissipation, overheating, and burning.

High Precision Three-Jaw Chuck

Flex shaft grinder has a strong 3-jaw chuck for a tightened grip with attachments and a flexible design to give more design freedom. Stronger clamping capacity and so bits and accessories won't bog down.Accepts rotary tool accessories from 1/8", 3/32", 1/16", 1/32", 1/64", 5/32''.

Stepless Variable Speed Foot Pedal

The foot-operated layout of this jewelers tools set keeps your hands free to hold the tools in your hands more carefully. The suspension design helps to reduce benchtop clutter and keep your workspace clean.

Cutting& Drilling

The all-inclusive high performance flex shaft rotary tool kit includes various cutting bit, for shaping, hollowing, grooving, slotting, and making tapered holes in soft metals, plastics, and woods.

Carving/Engraving

For hard materials like cast-iron, our rotary tools kit has a compelete rotary burr set for shaping, smoothing, and material removal.

Polishing& Cleaning

Give a new life to your furniture dying from rust with our de-burring and material removal rotary tools set.

Grinding

Restore your appliances and polish metals by attaching the grinding or sharpening accessory in simple steps. Use these abrasive stones for wood, plastic, metal and glass.