12 best power flooring nailers

Product description

The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2" to 2" length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4" (6.4 mm) air fitting.

• DRIVES: 15.5 GA flooring staples or 16 GA "L inches shaped flooring cleats from 1 1/2 inch to 2 inch length.
• Has pneumatic driving action. Used in hardwood and engineered flooring
• NON MARRING BASE PLATES: For 1/2 inch (12.7 millimeter) through 3/4 inch (19.1 millimeter) flooring.
• ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip.
• INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4 inch (6.4 millimeter) Air Fitting with Dust Cover.

User questions & answers

Question:	can i purchase replacement baseplates
Answer:	the base plate are non marring for 3/4 and 1/2 inch floors. They are made of some type of vey hard and slick plastic. I uses for prefinished 3/4 inch hardwoods. Not sure of your question, but both come with the tool and you will want one of them on when ever you are laying floors depending on the thickness of your floors.
Question:	Description "non-marring base plates" are included. is that the protective foot attachment (m-4) for prefinished floors? not the same item
Answer:	We installed 3" wide by 3/4" solid hardwood maple flooring with it and it worked Awesome !
Question:	is it for solid harwood flooring
Answer:	This tool is intended for the installation of new hardwood flooring, not to repair previously installed flooring, which squeaks, due to warping, or joist sagging. Old flooring will require some other type of repair, such as the use of screws and wood plugs to covers to them, or special ring shank nails.
Question:	Will this stop creaks in an old hardwood floor
Answer:	Used it to put down a large den floor, worked great! Would buy again!

Product description

The DEWALT DWFP12569 2-N-1 Flooring Tool engages all flooring profiles and protects prefinished flooring. At only 10.6 lbs, optimized for the most popular solid flooring fasteners.

• Lightweight at 10.6 lbs for better balance and control
• Optimized for the most popular solid flooring fasteners, 15.5ga Staples and 16ga “L” Cleat Nails
• Interchangeable, Non-marring base plates adjust to all sizes of flooring
• Ergonomically designed with longer handle and comfortable rubber grip for ease of use
• Lower CFM requirements for less compressor run-time

User questions & answers

Question:	is their a case available
Answer:	I couldn't say for sure if it has a gasket issue or not. I've only used mine a few times but I have had no issues with this gun whatsoever. No leaks, no jams, no misfired. Other comparable guns I've used I have had many issues with. This I haven't.....yet!
Question:	Have they fixed the gasket issue
Answer:	Will not work with 18 ga nails. If you could see 18 and 15.5 side by side you would understand. Great tool for the money though
Question:	The description says "Optimized" for, 15.5ga Staples and 16ga "L" Cleat Nails. Does Optimised mean this is all it will use or will it work with 18ga
Answer:	Yes it does.the prefinished adapter for the m111 fits it also. ( it works fine on prefinished the way it is also) I am a pro installer and have installed WELL over 500k ft of hardwood. This nailer is great for the money.
Question:	Does this nailer come with the mallet
Answer:	It comes with 3/4”, 1/2” & 3/8” foot plates.

Product features

DEWALT DWFP12569 2-in-1 Flooring Tool

The DEWALT 2-in-1 Pneumatic Flooring Tool drives 15.5-Gauge staples and 16-Gauge "L" cleat nails from 1-1/2 in. to 2 in. length. This tool features mallet actuated pneumatic driving action. This tool is backed by a DEWALT 3-year limited warranty for added peace of mind.

Product description

The NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge Flooring Stapler and Nailer is designed for the installation of tongue and groove hardwood flooring. This air powered flooring nail gun and stapler is compatible with 16 gauge T-cleats and L-cleats and 15.5 gauge 1/2" crown staples from 1-1/2" to 2" for all three types of fasteners. Two interchangeable no mar base plates allow you to install 1/2" to 3/4" flooring while protecting finished flooring surfaces, ensuring professional results for DIYers tackling home improvement and repair projects as well as construction contractors at the job site. Durably constructed of die cast aluminum and heat treated steel parts, this tool is both rugged and lightweight. The ergonomically designed handle has a rubber grip, providing for additional ease of use during long shifts. Recent upgrades include a smaller tool body, a semi-quick release for easier access to the drive blade to clear jams, a magazine cover for smooth fastener feeding, and an improved base plate design. The value provided by the revolutionary design of this innovative tool comes at far less expense than three separate tools. The Pneumatic 3-in-1 15.5-Gauge and 16-Gauge Flooring Stapler and Nailer includes a white rubber mallet, air tool oil, and adjustment tools. Operating Pressure 70 – 110 PSI, Magazine capacity 90 – 120 Staples. Compatible fasteners 16 Gauge Glue Collated T and L Cleats from 1-1/2" – 2", and 15.5 Gauge Glue Collated 1/2" Crown Staples from 1-1/2" – 2"

• Nailed It: This pneumatic flooring nailer and stapler features a lightweight aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows it to easily switch between T-cleats, L-cleats and staples for maximum functionality.
• Ergonomic Design: This flooring nailer has an extended handle to prevent achy backs and a light strike bumper for low impact fastener driving. It comes with a rubber mallet to move flooring in place. It's ideal for professional jobs and home DIY projects.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	I need a replacement baseplate for 1/2" flooring is it possible tho by a replacement
Answer:	The only recommended fasteners are 16 gauge "T & L" cleats and 15.5 gauge staples.
Question:	Can I use it for 16ga finish or brad nails in this gun
Answer:	Hey I"m about to install Brazilian Cheery 3/4" wood too - how did it go for you???@@@
Question:	Has anyone installed 3/4 inch 3 1/2 in wide Brazilian Cherry hardwood with this gun using 16 ga 1 3/4 in L cleats. Did it work OK
Answer:	Yes, you can use any brand or Bostitch nail
Question:	Can I use any brand nailers with the NuMax SFL618 ? Recommendations...Bostitch ok
Answer:	Not at this time

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The NuMax SFL618 Pneumatic 3-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler is lightweight power tool can be used to finish your projects or repairs as it features an aluminum body, ergonomic comfort grip handle, replaceable base plate and 3-in-1 design that allows you to easily switch between T-cleats, L-cleats and staples for maximum functionality.

Easy to Use

This tool by NuMax can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes in a die cast aluminum body and a quick release for clearing jams.

Product description

This 3 PLUS HFSNSP tool is a 2 in 1 tool that can shoot both 15-1/2 gauge staples and 16 gauge L cleats with the same tool and magazine. You can complete your project with this one tool efficiently. It equipped with a convenient long reach handle with a padded grip. You could also remove the long reach handle and use the short one as you like, which is also grip padded. The kit also includes a set of flooring plates to help match different sizes of floorings. It is a perfect choose for contractors and residentials to complete the flooring installation job. The tool goes with two shoe plates. 1/4" shoe plate for 3/4" thick hardwood flooring; 5/16" shoe plate for 1/2" thick hardwood flooring.

• 2 in 1 flooring tool uses 15-1/2 gauge staples and 16 gauge L cleats ranging from 1-1/2" to 2"
• Interchangeable flooring plates for all sizes of floorings
• Removable long reach handle
• Mallet with white rubber included
• Has pneumatic driving action. Used in hardwood and engineered flooring.

User questions & answers

Question:	Can I user this for 3/8" stranded bamboo
Answer:	We did an 8 by 18 with approximately half a bucket
Question:	How much psi do i run this nailer on
Answer:	Don't know for sure
Question:	What Size plate do you use for 3/4inch flooring, This one comes with 5/16 and 1/4 in description pictures
Answer:	There are many types of Stainless Steel alloys (varying the carbon steel content for corrosion resistance versus strength...). More corrosion resistant stainless steel alloys will 'generally' be a softer, weaker steel due to the alloys used- and those not used. This is generally not an issue with screws going into wood- like these ones. If however you are driving stainless steel 'tapcon style' fasteners into concrete- fastener breakage could be a factor. That said, all stainless steels I have used are much more corrosion resistant than 'plain steel' screws, more corrosion resistant than zinc plated screws, and also more corrosion resistant than galvanized screws. These #2 square drive screws are vastly superior to any of the 'lifetime warranty' coated/treated non stainless screws at the big box stores- and the square drive is much less prone to stripping than a cross recessed (ie: phillips head) screw is. BTW, stainless can and will rust in the proper environment- it is not rust proof- just far more rust resistant than all the others besides perhaps titanium.
Question:	I have never used a pneumatic nail gun before. Can it be used on anything in addition to laying flooring
Answer:	No, there was no bit, but screws are extremely sturdy and most importantly, these do not strip easily, even at high drill speed. They also have a cutting edge at the tip which makes fast and easy effort to screw into the wood. I ordered them 2 separate times and was very satisfied with the product.

Product description

Value not found

From the Manufacturer

BOSTITCH engineered the MFN-201 flooring cleat nailer for users that prefer to install flooring manually. As a result, it requires no compressor or hose when driving fasteners. Its thoughtful design protects delicate flooring while maximizing user comfort. The MFN-201 installs both pre-finished and unfinished flooring (thicknesses of 1/2 In. to 3/4 In.).

• Selectable drive mode to choose between single or multi-blow options
• Graphite mallet with ergonomic comfort grip
• Installs 1/2", 5/8" and 3/4" flooring
• Rubber bumpers protect pre-finished floors against marring
• Kit includes: Flooring Nailer, Mallet, Flooring Adaptors (for 1/2" & 5/8" flooring), Carrying Case & Hex Wrenches

User questions & answers

Question:	Will this gun shoot staples and what gauge and length
Answer:	Not sure. It does come with a 5/8 plate though.
Question:	Can use 18 gauge nail cleats
Answer:	It works with most common flooring nails/staples. You can get them online or Home Depot/Lowe's
Question:	Has anyone used it with 18 gauge cleats? I know manual calls for 16 gauge, but does 18 work
Answer:	No. I would recommend glue down since 3/8 inch is too thin. If you really want to nail down, find a 18 gauge stapler.
Question:	what gauge nail does this take
Answer:	Yes, I used it on 3/4" bamboo flooring with 1-1/2" long t-nails and it worked great Great heavy duty tool for the price, I was very pleased

Product description

The Freeman PF1618GLCN pneumatic 3-in-1 16-gauge and 18-gauge 2" Flooring nailer is the first all-in-one flooring nailer, providing DIYers and professional contractors With a solution that takes the guess work out of what flooring nailer to buy. For the installation of more common Tongue and Groove hardwood flooring, such as 5/8" To 3/4" Oak, maple, and hickory, the 16 gauge t-cleat is ideal. If you are installing 3/8" To 3/4" Engineered or solid Tongue and Groove flooring, including bamboo, stranded bamboo, carbonized bamboo, or exotic hardwoods, The 18 gauge L-cleat is your fastener. The durable anodized aluminum magazine allows you to load 16 gauge L-cleats or 18 gauge L-cleats ranging in sizes from 1-1/4" To 2" In length without making any adjustments or modifications, providing a seamless operation. This air powered flooring nailer uses any brand of 16 or 18 gauge L-cleat, so there is No fear of finding the correct fastener. The one piece Drive blade is made of hardened steel with an aluminum Cylinder and high quality rubber O-rings, while the body of the nailer is constructed of durable die cast aluminum to stand up to daily use. Featuring 3 interchangeable base plates, This Pneumatic flooring nailer provides stability and protects flooring surfaces from scratches. Height adjustment of the base plates allows you to precisely line up with your nailing area, and the no mar design provides increased protection when working on finished flooring surfaces. The pneumatic 3-in-1 16-gauge and 18-gauge 2" Flooring nailer includes a fiberglass mallet with rubber head, three interchangeable base plates, air tool oil, and adjustment wrenches.

• Nailed it: This Pneumatic 3-in-1 16-gauge and 18-gauge 2" Flooring nailer uses 18 gauge L-cleats and 16 gauge L- and t-cleats. It's ideal for Oak, maple, hickory, bamboo, and engineered tongue and groove flooring – both finished and unfinished.
• Pro design: this durable nailer features lightweight aluminum construction, an extended reach handle, no mar feet, and 3 interchangeable base plates that provide stability and protect finished floor surfaces from scratches. It comes with a no mar fiberglass mallet.
• The right tool for the job: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and dependable: we make an array of durable construction Tools and Accessories, including staplers and nailers For siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, BOSTITCH, Senco, Paslode, and DEWALT.

User questions & answers

Question:	What 3 size base plates does this nailer come with
Answer:	Clear jam by disassembly as directed on page 05 of manual. ( http://freemantools.com/wp-content/uploads/2016/02/PFL618BR-manual.pdf ) Remember to lubricate frequently. Avoid using cleats that are broken into small groups. My hammer only jammed once in 1500 sq ft room and it was when I loaded a bunch of small groups of cleats. I cleared it emptied it, and only used full rows successfully after that.
Question:	Only used one day it worked great now the hammer arm is not working meaning the whole nailer is not working what do we do? Customer service closed
Answer:	Yes it can. I have installed several rooms of 3/8 flooring with it.
Question:	Can this nailer be used on 3/8" flooring
Answer:	The flooring nailer does not come with a case.However, you can purchase a carrying bag from Freeman as well. Model number FTBRC01.
Question:	Does this nailer come with a case
Answer:	hi... they are about 8 penny size, they were designed for use on hardwood flooring...they go in on about a 45 degree angle so need to be about 2 to 2 1/2 inches long... jim

Product features

16 Gauge L-Cleats, 16 Gauge T-Cleats, 18 Gauge L-Cleats

When we say the PF1618GLCN is a '3-in-1 Stapler & Nailer', it means this one tool is compatible with three fasteners: 16 gauge L-cleats, 16 gauge T-cleats, and 18 gauge L-cleats. 16 gauge L-cleats and T-cleats (1-1/2" to 2") are ideal for your more common hardwoods such as 5/8" to 3/4" oak, maple, and hickory tongue and groove flooring. If you are installing 3/8" to 3/4" engineered or solid T&G flooring like stranded bamboo, carbonized bamboo, or exotic hardwoods, 18g L-cleats (1-1/4" to 1-3/4") are ideal.

16 Gauge L-Cleats, 16 Gauge T-Cleats, 18 Gauge L-Cleats

When we say the PF1618GLCN is a '3-in-1 Stapler & Nailer', it means this one tool is compatible with three fasteners: 16 gauge L-cleats, 16 gauge T-cleats, and 18 gauge L-cleats. 16 gauge L-cleats and T-cleats (1-1/2" to 2") are ideal for your more common hardwoods such as 5/8" to 3/4" oak, maple, and hickory tongue and groove flooring. If you are installing 3/8" to 3/4" engineered or solid T&G flooring like stranded bamboo, carbonized bamboo, or exotic hardwoods, 18g L-cleats (1-1/4" to 1-3/4") are ideal.

16 Gauge L-Cleats, 16 Gauge T-Cleats, 18 Gauge L-Cleats

When we say the PF1618GLCN is a '3-in-1 Stapler & Nailer', it means this one tool is compatible with three fasteners: 16 gauge L-cleats, 16 gauge T-cleats, and 18 gauge L-cleats. 16 gauge L-cleats and T-cleats (1-1/2" to 2") are ideal for your more common hardwoods such as 5/8" to 3/4" oak, maple, and hickory tongue and groove flooring. If you are installing 3/8" to 3/4" engineered or solid T&G flooring like stranded bamboo, carbonized bamboo, or exotic hardwoods, 18g L-cleats (1-1/4" to 1-3/4") are ideal.

16 Gauge L-Cleats, 16 Gauge T-Cleats, 18 Gauge L-Cleats

When we say the PF1618GLCN is a '3-in-1 Stapler & Nailer', it means this one tool is compatible with three fasteners: 16 gauge L-cleats, 16 gauge T-cleats, and 18 gauge L-cleats. 16 gauge L-cleats and T-cleats (1-1/2" to 2") are ideal for your more common hardwoods such as 5/8" to 3/4" oak, maple, and hickory tongue and groove flooring. If you are installing 3/8" to 3/4" engineered or solid T&G flooring like stranded bamboo, carbonized bamboo, or exotic hardwoods, 18g L-cleats (1-1/4" to 1-3/4") are ideal.

Product description

Remember when you had four different tools all in one nailer? Go from a brad nailer to a stapler to a flooring gun all with the WEN 4-in-1 18-Gauge Pneumatic Flooring Nailer and Stapler. Drive 18-gauge brads anywhere from 5/8 to 2 inches in length or 1/4-inch narrow crown staples anywhere from 1/2 to 1-5/8 inches in length. Attach the adjustable spring loaded flooring head to angle your fasteners at a 45-degree angle, making this the perfect companion for carpenters that need versatility on the job. With an operating pressure of 60 to 100 PSI and a 1/4-inch NPT air inlet, simply hook up your favorite air compressor and start nailing. The onboard depth adjustment wheel controls how deep the fastener shoots into your workpiece while the quick-release nose makes it easy to clear jams in the middle of a big job. Our lightweight design along with the rubber-backed grip prevents fatigue during long jobs. Combine that with the 100-nail capacity magazine for a nail gun that makes easy work out of crown molding, tongue and groove flooring, trim work and more. This package includes a carrying case for storage and transportation, two hex keys and oil. And, because it’s a WEN product, your 4-in-1 18-Gauge Flooring Nailer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. Remember when you could take on the entire job with one single nailer? Remember WEN.

• Drive 18-gauge brad nails anywhere from 5/8 to 2 inches in length
• Shoot 1/4-inch narrow crown staples anywhere from 1/2 to 1-5/8 inches in length
• Removable spring loaded flooring shoe angles fasteners at 45 degrees
• Features quick-release nose for easy jam clearing, an adjustable air exhaust and a 100-nail magazine capacity
• Includes a carrying case for storage and transportation, two hex keys, a removable non-mar tip for finishing applications, and oil

User questions & answers

Question:	Can I use L cleat 18g nails with this model
Answer:	Unfortunately, this item is not compatible with L or T cleats.
Question:	Will this work on 5/16 hardwood floor
Answer:	I have the 61721, and it shot 2" brads through 3/4pine paneling and into pressure treated 2x4 no problem. You could easily shoot the brads too deep, i had to adjust the air down to get the heads to be near flush. I have no idea if it's a good idea, or the proper fastener for 5/16 hardwood, but I imagine the nailer is fully capable of shooting the brads with enough force, but who knows ... is an 18ga brad even strong enough to penetrate 5/16 hardwood. Maybe it will go through soft maple, but what about solid hickory? or beech? we don't know what your flooring is.
Question:	Can this be used to staple artificial grass to subgrade bend a board
Answer:	No it would go right through. Use a staple gun.
Question:	Can be use for repair sofa
Answer:	I'm not sure how you will be repairing you sofa but you can leave the flooring foot on or you can remove it and it becomes a brad nailer. Eather way for the price it is a very hand tool. Hope this helps you.

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The WEN 61741 4-in-1 18-Gauge Pneumatic Flooring Nailer and Stapler with Case is lightweight power tool can be used to finish your projects or repairs quickly as the removable spring loads the flooring shoe at an angle of 45 degrees.

Easy to Use

This tool by WEN can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. This tool is also extremely safe to be used as it comes in a die cast aluminum body and a quick release for clearing jams.

Product description

Designed to stand up to the rigors of everyday use, the Estwing EF18GLCN Pneumatic 18-Gauge 1-3/4" L-Cleat Flooring Nailer is built with a hardened steel drive blade, rubber O-rings, and an aluminum body. This air powered flooring nailer features a light strike bumper, and comes with a lightweight fiberglass mallet. The white rubber head prevents marring when you move your flooring into place. On the rare occasion the nailer jams, the tool-free quick jam release makes it easy get back to work quickly. The 360 degree swivel industrial NPT fitting gives you flexibility when moving around, and the air filter and anti-dust cap keep the tool's interior clean and running smoothly. Each nailer comes with a padded bag with front and interior pockets. This flooring nailer can install 3/8" to 3/4" solid or engineered tongue and groove flooring, bamboo, exotic wood, or other dense flooring. The no mar base makes it safe to use on prefinished or unfinished flooring. This nailer is designed to use 18 gauge L-cleats ranging from 1-1/4" to 1-3/4". This L-cleat flooring nailer is suitable for any professional construction contractor at the job site or DIYer at home. The Pneumatic 18-Gauge 1-3/4" L-Cleat Flooring Nailer is part of Estwing's professional line of pneumatic tools.

• Nailed It: This durable flooring nailer uses 18 gauge L-cleats to install 3/8" to 3/4" solid or engineered tongue and groove flooring, bamboo, exotic wood, and other dense flooring types. The no mar base makes it safe to use on prefinished or unfinished flooring.
• Pro Design: This pneumatic nailer features a durable, lightweight aluminum construction, light strike bumper, tool-free quick release to easily clear jams, and interchangeable base plates enabling you to match flooring thickness for accurate fastener placement.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Will this work on 1/2" bamboo t&g
Answer:	dont buy this.. it double shoots nails and is more trouble than an air operated floor nailer. i had to rplace the anvil striker that hits the nails and the nylon block. then i sold it at a garage sale for 60$
Question:	We installing 9/16 Cali bamboo flooring t and g will this gun work
Answer:	No, only staples. This is designed for 5/16" to about 3/8" flooring. This size flooring has thin tongues, ie staples, not cleats . Cleat nails are best for 3/4" flooring with a pneumatic/mallet flooring nailer.

Product features

Estwing EF18GLCN 18 Gauge Flooring Nailer

Since 1923, Estwing has taken pride in designing the world's most durable, comfortable, and attractive tools. Designed with the professional in mind, the EF18GLCN comes with all of the premium features and durability you need to get the job done. This nailer takes the hard work out of installing 3/8" - 3/4" engineered or solid tongue and groove flooring, dense and exotic woods, and bamboo.

Product description

The Model 50F, Trigger-Pull cleat nailer is the most advanced 18-Gauge Powernailer in its category. This nailer was designed with a variety of innovative features to work faster, longer and harder than the competition. The model 50F features trigger-pulled actuation, a one-piece adjustable Flex Foot and a surprisingly compact size. When it comes to fastening today’s top brands of engineered and hardwood flooring, this Powernailer is in a league of its own.

• Put the Hammer Down! This 18-gauge flooring nailer takes all of the intimidation out of a floor installation with the pull of a trigger. No mallet is required to operate this tool, but it still drives an 18-gauge floor cleat! It is perfect for today's top brands of engineered flooring.
• Install the widest variety of Wood Floor. Featuring Powernail's patented FLEX Foot technology, this 18-ga floor nailer is fully adjustable and installs engineered wood flooring from 3/4" to 3/8".
• Protect your floor! This Powernailer's adjustable foot will not scratch or damage prefinished floor, nor will it loosen half-way through an installation. The Flex foot keeps this tool off of the subfloor so when adhesive is used your tool will not drag or catch.
• This trigger-pull cleat nailer is sold as a kit and includes one model 50F nailer, one large tapping block and a Heavy-Duty Carrying Case.
• Install your floor with a nail designed specifically for floors! The Powernail Model 50F drives 18-gauge, L-shaped Floor Cleats (Floor Nails) in lengths from 1-3/4" to 1". The model 50F can install traditional tongue and groove Engineered Wood Flooring as well as Interlocking systems. Use with 18-gauge Powernail PowerCleats or similar brands 18-ga L-shaped steel cleats.

User questions & answers

Question:	at degree angle does this nailer drive the cleats at
Answer:	Yes. I used it on solid oak that was about 5/16 thick. It would work better on 3/8 engineered.
Question:	How well does it work on Bamboo flooring
Answer:	This only does 1/4" crown (for the 3/8" flooring) and 18 ga nails. You need somthing heavier for the subflooring
Question:	Well this work for oak hard wood floors
Answer:	This nailer as well as all others I have used for different flooring types from 3/8" up to 3/4" have always nailed into the tongue. The bottom part of any T & G material wouldn't have enough "meat" to properly hold the material down in my opinion. This would be especially true for thinner material. Also the material below the groove is purposely milled shorter in the profile then the finished layer to allow a tight fit. I would check the installation instructions again. This stapler is made to put the staple down at an angle determined by the installed shoe through the tongue. This tool doesn't have a shoe that would work in a groove.
Question:	Will this work for putting up 3/4 t&g ceiling board
Answer:	Yes it ne used with 2inch staplers nails.

Product description

This 3 PLUS HFS509040SP is a 4 in 1 tool that can shoot both 18 gauge brad nails and narrow crown staples.This versatile nailer is ideal for flooring installation up to 5/8'', and can be easily converted to a standard combination stapler/brad nailer for finish work by switch the nose. It features a light weight die-casting magnesium body, tool-free adjustable depth control, tool-free quick-clear jam release, 360 degree air deflector.

• Uses 18 gauge brad nails from 3/4” to 2” and 18 gauge narrow crown staples with 1/4” crown from 5/8” to 1-1/2” in length
• Designed for 1/4''-5/8'' engineered or solid hardwood flooring;
• Easy to convert to as conventional combination stapler/brad nailer;
• Multi-directional exhaust cover rotates 360° to direct exhaust air away from user;
• Tool-free adjustable depth control device for proper setting of nail heads. Quick clear jam release functions for easy maintenance;

User questions & answers

Question:	Can i use stalpes for straight nailing, or just angled for flooring
Answer:	T don't recommend these screws, pretty bad quality: the square-shaped bit seats are easily deforming while the bit is applied. Made in China Later I found non-stainless steel with anticorrosion coat, strong star-shaped seat, made in the USA and also less expensive,
Question:	Does this shoot 18 gauge cleat nails
Answer:	I found this info ---500 square foot bucket at 16" on center---hope this helps
Question:	can this nail gun be used for 3/4" solid hardwood
Answer:	Yes, that is the product I used these for on my deck.
Question:	Plus": Can you provide warranty terms, spare parts availability, and an online link to the pdf manual
Answer:	This should work with a 1/4" groove.

Product features

REMOVING THE FLOORING SHOE

INSTRUCTION OF FLOORING SHOE ADJUSTMENT

Product description

Valu-Air 9800ST 3-in-1 pneumatic hardwood flooring nailer is great for both professionals and home workers. It can shoot up a 15.5 inch gauge for flooring staples and 16 inch gauge for L and T cleats.

• 3-in-1 design for 16-gauge T & L cleats and 15.5-gauge flooring staples from 1-1/2” to 2”
• Ergonomic design with longer handle for easy operation.
• Interchangeable 1/2" and 3/4" base plates to match the floor thickness
• No-Mar rubber mallet included
• 1/4" NPT fits most air hose couplers

User questions & answers

Question:	How hard is ot to get nails for it
Answer:	No
Question:	Can this handle 3/8 engineered flooring
Answer:	I wouldn’t recommend it. Not a lot of power. I had sparks coming out of mine sometimes when I fired staples. It worked well enough for 3/8” engineered hardwood, but not a long term quality tool.
Question:	Does this work on 3/4 inch floors? The plates say1/2 inch and 3/4 but in another place it says1/2 and
Answer:	Has standard warrantee works with any brand 18gauge staples or brads i have this gun floor head is easilly removable for straight shooting or changing to brad nails i used it for 1400 sw ft 2-1/2" 5/8" solid oak flooring and mouldings all without any problems great all round gun any cheap WORKED better than $350 gun
Question:	Does this come with a case
Answer:	Yes it does.

Product features

Valu-Air 9800ST 3-in-1 Flooring Cleat Nailer and Stapler

Hardwood flooring

Features

Pneumatic, single strike design .Precise - drives at 45° angle every time .Lightweight die cast aluminum body offers job site durability .Mallet actuated to give you the tightest floors

Specifications

Weight: 13.3lb .Dimension: 19.2" x 19.5" x 3.5" .Operating Pressure: 70-110 PSI .Fastener Type: 18 Gauge Brad Nails/18 Gauge Narrow Crown Staples .Fastener Length: 16-gauge T & L cleats and 15.5-gauge 1/2" corwn width flooring staples from 1-1/2” to 2” in length

L-Shaped Flooring Cleat

• Type: L-Shaped Flooring Cleat
• Size: 16 GA
• Collation: Adhesive
• Length: 1-1/2" to 2"

T-Shaped Flooring Cleat

• Type: T-Shaped Flooring Cleat
• Size: 16 GA
• Collation: Adhesive
• Length: 1-1/2" to 2"

1-1/2" Flooring Staples

• Type: Flooring Staples
• Collation: Adhesive
• Size: 15 to 15-1/2 GA
• Crown Width: 1/2"
• Length: 1-1/2"

2" Flooring Staples

• Type: Flooring Staples
• Collation: Adhesive
• Size: 15 to 15-1/2 GA
• Crown Width: 1/2"
• Length: 2"

Product description

The award-winning Estwing EFL50Q Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler gives you the flexibility to switch between the two most popular flooring fasteners without having to carry around separate tools. Designed to stand up to the rigors of everyday use, it is built with a hardened steel drive blade, rubber O-rings, and an aluminum body. This air powered flooring nailer and stapler combo features a light strike bumper, and comes with a lightweight fiberglass mallet. The white rubber head prevents marring when you move your flooring into place. On the rare occasion the nailer jams, the tool-free quick jam release makes it easy to get back to work quickly. The 360 degree swivel industrial NPT fitting gives you flexibility when moving around, and the air filter / anti-dust cap keep the tool's interior clean and running smoothly. Each nailer comes with a padded bag with front and interior pockets. This nailer can install most 1/2" to 3/4" solid tongue and groove flooring, and comes with two interchangeable base plates. The no mar base makes it safe to use on prefinished or unfinished flooring. The 2-in-1 nailer is compatible with 16 gauge L-cleats from 1-1/2" to 2", and 15.5 gauge 1/2" crown flooring staples from 1-1/2" to 2". This flooring nailer and stapler is suitable for any professional construction contractor at the job site or DIYer at home. The Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2" Flooring Nailer and Stapler is part of Estwing's professional line of pneumatic tools.

• Nailed It: This versatile flooring nailer uses 16 gauge L-cleats and 15.5 gauge 1/2" crown flooring staples. Two interchangeable base plates let you install 1/2" to 3/4" solid hardwood including cherry, oak, maple, walnut, and other nail down tongue and groove flooring.
• Pro Design: This nailer features a durable and lightweight aluminum body, tool-free quick release to clear jams quickly, no-mar feet, light strike bumper, and interchangeable base plates. It comes with a fiberglass mallet, padded bag, air tool oil and adjustment tools.
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	Can this nailer be used with bostitch fln-200 2-inch flooring l-nail
Answer:	Instructions are included / real good nail gun for price- you need a bigger compressor 125psi max runs at like 90psi
Question:	The description says it can install 3/8” flooring but there is no 3/8” plate included. Do you have to buy that plate separately
Answer:	for 3/4 flooring, you use the 5/16 standard plate the comes on the gun already installed
Question:	Where is it made
Answer:	I don’t think so. It uses the flooring nails and nails them at a 45° angle. I can’t imagine what other applications it might be good for. But I am certainly no expert. This was my first time using one as well.
Question:	Will this work with 9/16" bamboo flooring
Answer:	The angle adapter is removable so you can use it as a regular stapler or finish nailer.

Product features

Estwing EFL50Q 2-in-1 Flooring Nailer

Since 1923, Estwing has taken pride in designing the world's most durable, comfortable, and attractive tools. Designed with the professional in mind, the EFL50Q is tool with all of the features and durability you need to get the job done. Perfect for installing 1/2" - 3/4" solid tongue and groove flooring, this 2-in-1 nailer and stapler takes the hard work out of laying flooring.