13 best lathe machine

Product description

1/3 Horsepower bench top lathe with variable speed motor

• Motor: 1/3 HP, 2 Amp, 110V, Single-phase, 60 Hz
• 12-inch distance between centers
• 8-inch swing over bed
• Cast iron construction and infinitely variable speed control
• Includes two tool rests

User questions & answers

Question:	I have a chuck that is 1"-8tpi female thread (nova 48111), it doesn't fit on this lathe. what adapter should i buy
Answer:	Buy a 3/4" 16 TPI to 1" 8 TPI adapter. If you further questions go to http://www.woodturningz.com/downloads/w1704_ds.pdf for the specs on this machine.
Question:	is there an adapter for the face plate for mounting live center chucks? I bought one but won't line up with holes
Answer:	I'm not sure if they make the adapter to mount on the face plat. I have a 2" diameter three jaw,self centering scroll type chuck that i bought from Amazon that ihave used that works great,but i think that the holes in the face plate is for mounting a backing block to the piece of wood stock to turn a bowl. It says in the manual that you glue the block to the wood your turning and use the holes to screw the block on to face plate. Hope this helped.
Question:	What size wood stock can it hold? How about something like 12'' long by 8" wide piece of wood
Answer:	The length it will hold will be dependant upon what chucks you have in the head and tail stock. The bulkier the chucks, the shorter the length it will handle. I'd say it will hold 12" lengths unless your chucks are sizable. I wouldn't try more than 4" width stock unless it was short. Although the lathe may hold the stock, it would be too much for the motor. The intended purpose of this lathe is to make small things like ink pens, Christmas ornaments, small toys like tops or yo-yo's and tool handles etc. If you want to mount 12" X 8" stock you should be looking at full sized lathes.
Question:	is there anyway to secure to a bench
Answer:	Yes. It has has three holes in the base that you can bolt it down with. I bolted mine down on a metal stand. It holds it down real solid. Mine is the Shop Fox W1704 also. It is well built. I really like mine. Hope this helps!

Product features

Shop Fox W1704 Benchtop Wood Lathe

Tackle pen turning or other small cutting or shaping projects using the Shop Fox W1704 bench-top lathe from Woodstock International. Made of cast iron, and designed to fit neatly on a workbench, this lathe features a 1/3-horsepower, variable-speed motor and delivers spindle speeds between 700 and 3,200 revolutions per minute (RPM). It also features a safety paddle switch, an MT No. 1 spur center, an MT No. 1 live center, 4-1/4-inch and 7-inch tool rests, a 5-3/4-inch faceplate, and a 3/4-by-16-inch TPI RH spindle.

Includes Two Tool Rests

The W1704 includes both a 4-1/2 and 7-inch tool rest for various turning applications and with a 13-inch distance between centers and an 8-inch swing over the bed this lathe is ideal for a variety of turning projects.

Variable Speed

The infinitely variable speed from 700-3200 RPM comes in handy when turning hard or soft species of wood.

5-3/4-inch Faceplate Included

This benchtop lathe includes a 5-3/4-inch faceplate which threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Product description

This is the video for how to use it: https://www.youtube.com/watch?v=Q03KevOqizM

Description:

This is a mini Buddha bead machine, compact and portable size, powerful woodworking lathe and beautiful appearance.

It also fits other DIY usage such as model,hobby DIY.

Specifications:

Material: Aluminum Alloy + Acrylic

Color: Silver

Plug Type: US Plug

Voltage: AC 100-240V 50/60Hz

Rated Voltage: 12-24V DC

Rated Power: 100W

Rated Speed: 1500-7000RPM

Power: 7 Level of Adjustable Speed

Processing Length: 140mm / 5.51in

Processing Diameter: 55mm / 2.16in

Chuck Clamping Range: 0.6-6.5mm / 0.02-0.25in

Swing Diameter: max 50mm / 2.0in

Grip Length: max 140mm / 5.51in

Matching Saw Blade Diameter: max 50mm / 2.0in

Machine Weight: 1436g / 3.17 lb

Package Included:

1x Mini Lathe Beads Machine

1x Speed Control Power Supply (12-24V)

6x Wood Carving Blade

1x Screw Thread Fixed Needle

3x Hex Shank Fixed Needle

1x Collet Wrench

1x Hexagon Wrench

3x Beads Round Device(12,18,22mm)

1x 50mm Cutting Piece

1x 50mm Diamond Cutting Piece

1x Polishing Plate

5x Polishing Piece

1x Polishing File Tool

1x Mini Caliper

NOTE:

1. If the user does not have lathe base experience, when using, uses should follow: low speed, slowly, cautiously and use other security operations.

2. The speed can be adjusted in 1500-7000RPM, speed of cutting wood should not exceed 4000, grinding can use higher speed.

3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

4. If not a cylinder, the speed should be reduced.

5. Tailstock bearing without lock tight.

6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.
• Super large torque ball bearing motor, maximum rotating speed up to 7000RPM providing ultra strong cutting power with low noise, you can use it at home.

User questions & answers

Question:	Is this lathe just for producing beads? Or can it be used for other small projects
Answer:	Hello friend, Yes,of course it can be used for other small projects.As long as the the sizes of the tools match your project,this is a DIY tool set.
Question:	Can i make pens and rigs on it
Answer:	NO you can not make pens or rigs, there is not enough power to do anything on it.
Question:	is the plastic cover removable
Answer:	Hello friend, If you don't want the plastic cover,you can disassembly it with the screws.
Question:	I just bought this. How do i get it to fit my 5/8 mandrel. I bought this to make duck calls. But cant figure out what i need to make it fit.what do i
Answer:	Swap out chuck.

Product description

Features

- High-precision, stability, low noise.

- Designed for the home DIY enthusiasts, small and portable, strong power.

- Large torque ball bearing motor.

- Suitable for all small square or cylindrical timbers such as Pterocarpus santalinus, dalbergia odorifera, Thuja sutchuenensis, etc.

Specifications

Power:200W

Maximum processing length:140mm

Maximum processing width:50mm

Material: aluminum alloy

Maximum processing thickness 50 mm

Product size:310*60*65mm

Work way:manual

Voltage:DC12-24V

Adapter:

Input:110V-24V AC~50/60Hz 1.3A Max

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max

Adapter size:113*53*35mm

Package Included:

1x adapter

1x machine

1x 50mm Diamond Cutting Blade

1x 50mm HSS Cutting Piece

1x polishing wheel

5x sandpaper

1x caliper

1x grinding rod

3x drill

1x cable

6x carving blade

1x diamond blade connecting joint

1x high speed steel blade connecting joint

1x drill chuck wrench

1x Allen wrench

1x beads fixed needle 1.5/2.0/ 2.5MM

1x thread fixed needle

• Specially designed for the home DIY enthusiasts and hobbies,small and portable size with strong power.
• Super large torque ball bearing motor, maximum rotating speed up to 8000RPM providing ultra strong cutting power with low noise, you can use it at home.
• Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• With 7 levels of power adapter enable you to adjust the rotating speed easily to meet different cutting speed.
• High quality aluminum alloy base and pure steel structure drill chuck.

User questions & answers

Question:	Can this be used in making wood turned pens
Answer:	It comes with the pieces to be able to perform all the functions that it displays, yes, however the size is on such a small scale that you are putting way more effort into trying to use this than you are getting out of it. This wasn't good for anything that I purchased it for, and isn't adaptable to larger scale pieces. Doesn't have a lot of power at all to perform any of the 'tasks' it boasts to accommodate.
Question:	can the chuck take 1/4 inch metal rod
Answer:	Don't buy from this company. The lathe they sent was very poorly made and we had an awful time returning it. Amazon had to get involved.
Question:	Is the chuck removable and if so, what is the diameter of the drive shaft
Answer:	It came with 1 tool
Question:	How is this machine cnc? is there a data port or card slot
Answer:	No, it doesn't. Actually I returned it unopened after buying it for this very reason. They were very understanding and refunded the full amount. As the description says it works well with "Plastic and Wood" but not metal.

Product description

Remember when you could turn your own pens? Fill your house with as many pens as you can with the WEN 8-inch by 12-inch variable speed mini wood Lathe. Adjust the variable speed anywhere from 750 to 3200 rotations per minute. The WEN 8-inch by 12-inch variable speed Benchtop wood Lathe features an MT1 spindle and Tailstock taper to tightly grip workpieces, two tool rests (4-1/2 inch and 7 inch) to provide needed support for chisels and tools during operation, and a 3.2-Amp motor to keep things turning. The easy-to-use Lever clamping system makes adjustments to both the tool rest and the Tailstock simple and precise. The WEN wood Lathe also includes a flat wrench, a headstock spur center, A Tailstock cup center, A knockout rod and a 2.3-Inch faceplate for non-spindle work pieces. And, because its a WEN product, your Lathe comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when you could turn pens, chess pieces and more? Remember WEN.

• Perfect for pens, bowls, cups, chess pieces, and other small workpieces
• Fits workpieces up to 12 inches long and 8 inches wide
• 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes
• Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM
• Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests

User questions & answers

Question:	Anybody know the thread size for the three tapped mounting holes on the underside of the lathe
Answer:	From their website: Benchtop mounting bolts: 0.30 Inch x 20 TPI (M8 x 1.25 pitch)
Question:	can you use a dedicated pen drilling chuck on this on this model 3420 or will it burn up the motor. I want to drill my blanks with it to
Answer:	I use a drilling chuck for all my pen blanks. As suggested, drill slowly, and frequently pull out the drill to remove shavings, as the blank may overheat and split.
Question:	How long did it take for you to get it? Says it ships in 2 months, with Prime
Answer:	When bought this lathe, they sent me 2. That being said, I got it when they said I would get it.
Question:	I'm interested in buy this lathe, does it run with 220 v or 150v, here were I'm living we run only 220. Waiting for answer, regards
Answer:	110

Product features

WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe

You will now easily be able to fit work pieces up to 12 inches long and 8 inches wide with the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe. The minimal design is ideal for pens, bowls, cups, chess pieces, and other small work pieces. You will be able to take on larger projects around your home with this tool.

Straightforward, Sturdy and Easy to Operate

With a stunning build quality, the WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe provides sturdy frame for various work pieces. Made from cast iron, features a 2.3 inch face plate, an MT1 spindle and tailstock taper and two interchangeable tool rests for added versatility.

• 【1/2 HORSE POWER MOTOR】- 1/2 Horse Power motor, Voltage: 120V. The powerful  motor starts softly offering motor's maximize safety and low noise.
• 【4 GRADE SPEEDS】- The adjustable belts can be adjust with ease and accuracy within 3400 RPM, 1100, 1600, 2300, 3400prm available.
• 【LARGE WORK CAPACITY】- 40" (1000mm) distance between centers, Cutting Diameter 14" (350mm). High concentricity. Moving tailstock to adjust proper distances for workpieces.
• 【SOLID STEEL CONSTRUCTION】- Solid steel constructed wood lathes for durability and strength, providing increased stability and smooth operation, reducing vibration.
• 【FREE WRENCHES & CHISELS】- 3 wrenches are for easy using and maintainance. 3 chisels for free also, 1 x Skew Chisel, 1 x Shear Scraper and 1 x Spindle Gouge.

User questions & answers

Question:	Can you do aluminum
Answer:	It was not be cost effective because you would need too many attachments. You’d have to modify the tool rest. It would turn it but you couldn’t hold the tool to turn it without modifications. There are lathes out there built for using with aluminum. Hope this helps
Question:	Will the wen la4444 4-inch 4 jaw self centering chuck set with -inch x 8 tpithread fit this lathe
Answer:	https://www.amazon.com/gp/product/B000KI8CBQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 This is what you need
Question:	does this brand and model come in 220 volt
Answer:	Only 110 volts
Question:	What are the minimum and maximum clamping measurements
Answer:	0 to 40 inches

Product features

Powerful Motor

1/2 Horse Power motor, Voltage: 110V, starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Optimally designed speed ranges of 1100-3400 RPM variable speed.

Large Work Capacity

40" (1000mm) distance between centers, swing over bed 14" (350mm). High concentricity.

Accurate & Stable

Steel constructed mini lathes is of increased stability and smooth operation.

7W LED Work Light

3 wrenches are for easy using and maintainance. 3 chisels for easy carving work.

Wide Application

Wood turning lathe, an ideal tool for various operations such as cutting, sanding, knurling, drilling, or deformation.

14 in. x 40 in. Wood Turning Lathe & Variable Speed 3400RPM

Our 14 in. x 40 in. Variable Speed Wood Turning Lathe features variable speed 1100-3400 RPM, a 1/2hp motor. Soft startups ensure safety to both workpieces and the motor. Precise design is perfect for high speed sanding and polishing of finished work.

Product description

10" x 18" Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike other lathes made of aluminum. 5 Speed ranges cover the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing. Lathe includes a live center, tool rest, knock-out bar and wrenches.

• Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change.
• Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum.
• 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.
• Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches.

User questions & answers

Question:	Does the headstock have a morse taper and also the tailstock
Answer:	Yes they are both #2 taper
Question:	Does this lathe have a 1 inch 8tpi
Answer:	yes
Question:	Does Rikon or another manufacturer make a steady rest for this lathe
Answer:	Carter products and Ron Brown's Best (Peacetree), make steady rests suitable for. 10 inch lathes. Carter Products is about $375 and Ron Brown's Best is about $160. I believe either can be adapted to Rikon 105, 10" lathe.
Question:	can a veriabule speed drive add to this lathe
Answer:	You can buy a conversion kit from Penn State. It comes with a new motor and electronics. Note that the lowest speed is 650 vs 500 RPM which is faster that recommended if you use Cole Jaws.

• 【PREMINUM QUALITY】:Quality or speed with this well balanced precision polisher, works with standard wheels and buff pads up to 4 inches. The two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter.
• 【UPGRADED】The third generation TM-2 mini table saw machine with larger operating platform and better accessories than 1st 2nd generation,Work better for cutting, carving, drilling, grinding, polishing, milling, grind-milling, grinding, brushing, cleaning, derusting, etc
• 【APPLICATIONS】Applicable to jade, jade, agate, metal, wood, etc. Engraving, polishing and drilling, also suitable for beads, Bodhi, various types of DIY handicraft polishing, grinding, family small workshops, cutting, polishing, etc. Full-featured A multi-purpose machine is a rare good product.
• 【SAFETY USE】Blade:150x20Hx60Tx1.4,Voltage: AC 220V/50HZ,Power: 350W,Speed: 8500-10000RPM,Handle chuck: 0-4MM adjustable precision,Machine chuck: 0.6-6.5MM,you can check with video for the professional installation .Free return within 1 month; non-manual reasons, half a year free parts
• 【PACKAGE INCLUDES】: 1 x host,1 x chuck,1 x 100cm flexible shaft,1 x grinding tool,1 x cutting piece,1 x fiber wheel,1 x grinding wheel,2 x chuck keys,1 x working handle,1 x sink,1 x wrench,1 set cutting shaft wrench,4 x press plates,2 x spindle,2 x polished connecting rod,2 x fixing screw,1 x hexagonal wrench,2 x spare carbon brush

User questions & answers

Question:	What size blade does it use
Answer:	Despite 'free' prime delivery the freight company would only drop it at the end of my 300' driveway. I contracted with a local courier to pick it up at the freight depot and had it delivered to the garage at a additional cost of $100.
Question:	Where is the water source?? I don't see a pump
Answer:	All of our listings are for 1 item only. Thank you and have a wonderful day.
Question:	Can you cut petrified wood with this unit
Answer:	I think they would be fine for a seven year old. They are just metallic blue and gold streamers (that was the color I ordered) and they have handles to hold on to. They might be a tad big for her to hold.

Product description

JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200)

• VERSATILITY: 24 integrated indexing positions.
• CONVENIENCE: Easy-to-reach controls and DRO.
• OPTIMAL SPEED: Choose from 60 to 3,600 RPM.
• INNOVATION: Ratchet-style belt tension system (patent pending).
• ON-BOARD STORAGE: Two handy tool caddies.

User questions & answers

Question:	Will 1221 tail stock accept #2 Morse taper drill chuck
Answer:	Yes! Just be sure that the tail stock hole and morse taper are clean, otherwise the #2 morse taper can be difficult to remove...
Question:	has this lathe have a indexing head
Answer:	William, yes this lathe has an indexing head. I have not yet used the feature but it is done with a spring loaded pin which you lock into anyone of 24 positions. The spring loaded pin in screwed in once the pin is set to hold it in place.Rich F
Question:	Is this Ron Swanson approved
Answer:	Yes, Ron personally blesses each unit as it’s loaded onto a truck.
Question:	Do you need to move a belt to change speeds? Or is there a dial or switch
Answer:	This lathe has a variable speed controller, so the speeds may be changed using the simple rotating knob. To provide speed ranges to suit any situation, especially for the more experienced turner, there is a three step pulley. This arrangement allows the variable speed controller to adjust speeds from 60 to 900 rpm on the low step of the pulley, 110 -1800 rpm on the 2nd step (medium), and a high speed range of 220 -3600 rpm on the the 3rd step. The belt need only be changed if you want to move to a different range of speeds. This is a very simple process.

Product features

JET 12'' X 21'' Variable Speed Wood Lathe - JWL-1221VS

The JET 1221VS lathe is different from anything we’ve made before. In truth, it’s different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept … Control.

• 【STURDY ALUMINIUM CONSTRUCTION】- The mini metal lathe bed is made of high grade iron. Equipped with nylon gears, this lathe machine is wear-resistant, durable, more accurate rotation and professional. Mini metal lathe power of motor: 550W. The full-length splashguard provides maximum protection.
• 【INFINITELY VARIABLE SPEEDS】- Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The handness and accuracy of the v-slideways are obtained by raw material, heat hardening and grinding. Emergency stop buttom included.
• 【ACCURATE 3-JAW CHUCK】- Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004"(0.01mm).
• 【PROFESSIONAL COMPOUND REST】- The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod.
• 【WIDE APPLICATION】- Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works.

User questions & answers

Question:	Is this a Sieg C3 model mini lathe
Answer:	no problem ! this mine lathe can be used in making wood turned pens !
Question:	How do you remove the chuck
Answer:	fit a 1/4" pen mandrill. That is .014" over 6mm !
Question:	is this powerful enough to cut small titanium parts
Answer:	The chuck can be not removable ! the Chuck can be stuck : 0.6MM-6MM ! the diameter of the drive shaft is 10MM !
Question:	Does it come with any tools? If not, what is recommended
Answer:	sorry ! this machine is diy ! there is not a data port or card slot !

Product features

Heavy & Sturdy Machine

Features a 7 inch swing over bed, 13.78 inch distance between centers and 21mm spindle bore. Includes a thread range of 12-52 TPI, threading dial indicator and standard and metric handwheel graduations.

Infinitely Variable Speeds

Variable speed from 50-2500 Rpm. Forward and reverse in all speeds. Operate either manually or with the adjustable auto feed rate. The feed speed can be adjusted according to the requirements of different workpieces.

High Accuracy Chuck

3-jaw self-centering chuck has gone tested with accuracy and repeatability to set cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm.

Four-way Tool Post

T-slotted compound slide with four-way tool post, 4 blades avaliable at most, easy to change quickly. Bevel cutting can be made by adjusting the angle of the compound rest with the lever.

Professional Cross Slide

Designed with abrasive resistance, moving blades freely with feed rod. 16 TPI reversible lead screw. The v-slideways with distance between center: 350mm(13.78").

Wide Applications

Suitable for processing jobs, like counter face turning, driling, threading and cutting jobs on materials made up of round bar. All accessories are well packed.

550W 7" X 14" Variable-speed Metal Lathe With Nylon Gears

The 7 x 14 Inch Precision Mini Benchtop Lathe features a 3-jaw chuck, a MT3 spindle taper, a MT2 tailstock taper, a tool rest and a 3/4 HP motor, designed to perform various types of metal turning, simple to operate. Through high frequency quenching process and precision grinding of high-quality cast iron bed. 0-2250Rpm spindle speed sub-level of two tranches spindle gear change speed control, continuously adjustable. A movable lamp is free for you.

Product description

Specifications: 

Power:200W 

Maximum processing length:140mm 

Maximum processing width:50mm 

Material: aluminum alloy 

Maximum processing thickness 50 mm 

Product size:310*60*65mm 

Work way:manual 

Voltage:DC12-24V 

Adapter: 

Input:110V-24V AC~50/60Hz 1.3A Max 

Output:12/15/16/18/19V 4.5A Max 20/24V 5A Max 

Adapter size:113*53*35mm 

Color: Shown as picture

Package list:Package list:

1x adapter 

1x machine 

1x 50mm Diamond Cutting Blade 

1x 50mm HSS Cutting Piece 

1x polishing wheel 

5x sandpaper 

1x caliper 

1x grinding rod 

3x drill 

1x cable 

6x carving blade 

1x diamond blade connecting joint 

1x high speed steel blade connecting joint 

1x drill chuck wrench 

1x Allen wrench 

1x beads fixed needle 1.5/2.0/ 2.5MM 

1x thread fixed needle

• ☪ Good choice for the both indoor and outdoor DIY enthusiasts, portable size enable users easy to carry.
• ☪ Nice designing, The large torque ball bearing motor, rotating speed range from 4000-9000RPM, can provid ultra strong cutting power with lower noise.
• ☪High-precision tailstock, flexible scaling adjustment. Transparent organic dustproof glass cover with super convective cooling hole, the welding line is covered with a full heat shrinkable tube.
• ☪ 7power levels adapter enable you to adjust the rotating speed to meet different cutting speed.It is easy and safe to operate.
• ☪ High quality aluminum alloy base and pure steel structure drill chuck.Multiple accessories for operating.

User questions & answers

Question:	can the seller send/email me a copy of the 'how to' manual in English
Answer:	sure...just been figuring it out as I go along. thank you that manual will come in handy for us
Question:	Is there an instruction manual for this product
Answer:	Yes, some stock we sold did not have mannual, but now we aaked the maunfcature to provide. you will get a mannual if you buy it in the future. if you buy now, you can contact me after you bought, we will sen d you a file about the products.
Question:	When can I expect to receive the instruction manual
Answer:	You can contact us if there is no mannual. and i will send you a instruction file through the reply message, usually within 24 hours.
Question:	is the center tailstock MT1 or MT
Answer:	sorry we do not know. But, my husband says that the tailstock that came with it...did not fit!@!@

Product description

Features:

Machine tool with powerful motor, the motor box and spindle box for conjoined structure. Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover. Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal. Maximum motor power is 60W by using more powerful motor. Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.

Specification:

Condition: 100% brand new

Metal: Metal

Weight: 4990g/176oz

Motor Speed: 12000rpm

Input Voltage/Current/Power: 12V DC/5A/60W

X-Axis travel: 32mm

Z-Axis travel: 145mm

Max Diameter of Machined Material: 100mm

Length of Machined Material: 135mm

Machining Accuracy: 0.07mm



Package Includes:

1 x Mini Lathe

1 x Adapter 

1 x Power Cord

1 x Accessory Package

1 x Machine Bottom Plate

1 x User Manual

• Machine tool with powerful motor, the motor box and spindle box for conjoined structure.
• Main parts: such as the spindle box, tailstock, long stand, size slider, motor blade, gear, connecting block are made of metal materials, with belt protection cover.
• Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal.
• Maximum motor power is 60W by using more powerful motor.
• Turning tool is high - speed steel material, can process soft, non - ferrous, precious metals. By using central block, the diameter can be expanded to 50mm.

User questions & answers

Question:	is good for metal
Answer:	The existing tool is .164 square by ~ 2" long. It can be reshaped with a grinding wheel. There wasn't a extra tool order form with the unit. There are cutter sets available from Grizzley and Harbor Freight Tools, but I have not ordered yet
Question:	Where can you buy the parts for the converted over to cnc thanks in advance
Answer:	It has a pass through hole but only 6mm
Question:	can this lathe process titanium, brass, tungsten, damascus steel etc
Answer:	8X8mm
Question:	does it come with any metal cutting tools
Answer:	120v

Product description

Parameter:

Material: aluminum alloy and Acrylic

Power: 100W

Voltage: 24V DC

Speed: 4000-8000 r / min, 7 grade speed

Size: 310* 60 * 70mm

Maximum turning diameter: 70mm.

Maximum clamping length: 180mm.

Chuck clamping range: 0.6-6mm.

Power Adapter：

Input: AC110V- 240V~50/60Hz 1.5A max

Output:12/15/16/18/19V 4.5A max; 20/24V 4A max

Wire length:1.1m+1.1m

Features:

High-precision, stability, low noise;

Designed for the home DIY enthusiasts, small and portable, strong power;

Transparent plexiglass shield, super convection cooling holes;

Large torque ball bearing motor.

Precautions:

1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.

2.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.

3.If not a cylinder, the speed should be reduced.

4.Tailstock bearing without lock tight.

5. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.

Package include:

1x Buddha Beads Lathe

1x Power Adapter

6x Wood carving set

3x Hex shanks(1.5mm,2mm,2.5mm)

Warm Notice: dear customers, your satisfaction is our top pursuit, if you receive any defective items, please never hesitate to contact us, we offer 30days return policy. thank you!

• Designed for the home DIY enthusiasts, small and portable, strong power, not suitable for mass production or commercial use.
• Power: 100W Voltage: 24V DC Material: aluminum alloy and Acrylic Speed: 5000-8000 r / min, 7 grade speed Size: 310* 60 * 70mm 3x Hex shanks(0.059inch,0.079inch,0.098inch)
• Maximum turning diameter: 70mm. Maximum clamping length: 180mm. Chuck clamping range: 0.6-6mm
• High-precision, stability, low noise, aluminum alloy materials, CNC machining.
• Thick aluminum base, acrylic dust cover motor. Transparent plexiglass shield, super convection cooling holes.

User questions & answers

Question:	I need a new tailstock center for my lathe like this. where can I get one please
Answer:	if you need a new tailstock center ! Please contact us at [email protected] ! We guarranty a satisfied solution to you.
Question:	Can this be used to turn hardwood
Answer:	so donot worry ! The mini lathe can turn hardwood !
Question:	Is there a longer bed available
Answer:	Yes you can buy this on amazon to the length you want. extruded aluminum t slot 1x2 then mount the motor and the end holder on to the new bed and ypur good. But at some point the motor will not be able to handle it so motor upgrade may be needed.
Question:	Can this be use for wood ring making
Answer:	I have used this for making wood rings, but primarily the sanding and polishing of bentwood rings made from painstakingly rolled wood veneer. Would not recommend for any kind of cutting, as it doesn't have the power.

• VARIABLE SPEED - This 12 x 18" wood lathe is featured with 550W powerful motor and variable speed with digital readings for you to work with precise speed
• WORK CAPACITY - Swing over bed 12" (300 mm). 18" (457 mm) distance between centers, swing over bed 10" (254 mm), 6" (150 mm) tool rest, 3" (75 mm) face plate, top drive and live center
• STABLE OPERATION - Cast iron constructed wood lathe with rubber feet, providing increased stability and smooth operation
• DELICATE WORKMANSHIP - All gears and shafts in headstock have been precisely grounded and hardened for longer service life and mute operation. High quality electronic units are applied throughout the machine
• APPLICATION - Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education

User questions & answers

Question:	Where is it made
Answer:	The unit sets on my lathe bed and the screw goes through it and connects to the other part under the lathe rails to anchor it to the lathe
Question:	What is yhe size of the spindle screw? not the bore but the threads. 1' 8tpi, 1.25 8tpi (threads per inch
Answer:	it should it fit my nova miney lathe
Question:	this unit comes with no instructions? there is a parts bag with no explanation on any of it or what its ? there website does not have any info at all
Answer:	I don't know, but on the lathe I have, I had to purchase a longer screw to hold the steady rest on the rails.It worked well fro me. I haven't seen the Delta 46-460 lathe.Enjoy working on the your lathe, it will give you ours of fun.
Question:	What is the thread count
Answer:	I haven't really tried to see how big it can get, I think it could probably work for nearly ten inches, maybe more. I was surprised by how sturdy it is, and have been very pleased with it

Product features

Powerful Motor

550W Power motor, turning speed 500-3800 RPM, Voltage: 120V/60Hz. Our powerful motor starts softly to offer motor's maximize safety and low noise design.

Variable Speed

Variable spindle speed of 500-3800 RPM

High precision, able to turn out standard qualified works

Longer operating life, high torque

Large Work Capacity

MT2 headstock and tailstock taper, 18" (460 mm) distance between centers, swing over bed 12" (300 mm), 6" (150 mm) tool rest, 3" (75 mm) face plate, top drive and live center.

Stable Operation

Cast iron constructed mini lathes is of increased stability and smooth operation.

Rails have been quenched with high frequency and elaborate milling

Digital Readout

Speed infinitely variable, easy to read via digital speed display

Wide Application

Bench top wood lathe, an ideal tool for use in labs, workshops, engineering and education.

Specifications

• Power: 550W, 110V/60Hz
  • Distance Between Centers: 18" (460 mm)
  • Swing Over Bed: 12" (300 mm)
  • Tool Rest: 6" (150 mm)
  • Face Plate: 3" (75 mm)
  • Taper of Spindle Bore: MT2
  • Range of Spindle Speeds: 500-3800 RPM infinitely variable
  • Taper of Tailstock Quill: MT2
  • Gross Weight: 88 lb (40 kg)
  • Package Dimensions: 34"* 19"* 12" (84* 46* 30 cm)