14 best dw angle grinders

Product description

The DEWALT DWE402 4-1/2" 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It's Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: 2-position side handle, 4-1/2" One-Touch (T27) Guard.. Cord Length- 72 inches

• Plastic / Metal
• Imported
• 11 Amp AC/DC 11,000 rpm motor which provides the best power to weight/size ratio available
• Spindle Size-5/8"-11 in, 1400 W, Corded Power Tool,
• Tool Length-12 in, Wheel Diameter-4-1/2-Inch
• Includes-One-Touch Guard,2-Position Side Handle,Wrench
• Dust Ejection System provides durability by ejecting damaging dust and debris

User questions & answers

Question:	Does the product come with a Type 1 guard necessary for cutting
Answer:	No, I would recommend a tiger disc by Weiler or a zip flap wheel from Norton. You can get these in a grit you need.
Question:	Does it comes with a case
Answer:	There is one disk.
Question:	This says 11,000 RPM which wheels do i purchase
Answer:	25
Question:	Does the paddle switch lock on
Answer:	Width & length 8 5/8” x 8 5/8”. Front depth 5 1/2”. Rear depth 4”

Product features

DEWALT DCH273B 20V Max* XR Brushless 1” L-Shape SDS Plus Rotary Hammer

Product Description

The DCH273B 20V Max XR Brushless 1” Rotary Hammer is a high-performance drill that is powered by a DEWALT brushless motor and a durable German engineered mechanism that delivers 2.1 joules of impact energy. Coupled with it's light weight design and SHOCKS Active Vibration Control technology, this hammer is ideal when used in overhead applications. The DCH273B is Dust Extraction ready for the D25303DH

Product description

The Black & Decker BDEG400 4-1/2" 6 Amp Angle Grinder is ideal for sharpening, cutting, grinding, removing rust and surface preparation. This grinder features a metal gear case for durability and longer life. It offers a 3-position side handle that provides added comfort and control for use with various materials and angles. It also has a spindle lock for easy accessory changes. Operates at 10,000 rpm, with a spindle size range of 5/8" - 11 ". Includes: 4-1/2" Small angle grinder, Metal grinding wheel, Spanner wrench .

• Metal gear case for durability and longer life
• 3 Position side handle provides added comfort and control
• Spindle lock for easy accessory changes
• Included Components: 4-1/2" Small angle grinder, Metal grinding wheel, Spanner wrench, Wheel Guard
• Narrow body for comfortable grip

User questions & answers

Question:	I'm confused. I see some people saying to use 7/8wheels and some say 5/8.Which one is it
Answer:	No , these are for tools with 6mm or 1/4" chucks. The dremel 8200 has a 3mm or 1/8" chuck.
Question:	Can this be used with a cut off wheel also
Answer:	If u want to sculpt wood you can depending on the tool u use with them. When used with pneumatic tools, which I think is recommended, they are aggressive and may be hard to control.
Question:	Can this item cut through a metal bolt? If so, what blade is recommended? Thanks in advance
Answer:	Only if the tool has a 1/4" shank. The dremel tools I have seen have a 1/8" shank.
Question:	What size shaft ? 5/8" or
Answer:	It's not dishwasher safe, so it includes a cleaning brush, even if it doesn't help much. I prefer the grinder kit I bought from other brands, has a brush with wooden handle for better cleaning. Link : https://www.amazon.com/dp/B07RWYW74H

Product description

Makita’s 4-1/2” Cut-Off/Angle Grinder combines 7. 5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11, 000 RPM, with soft start for smooth start-ups. The Cut-Off/Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris. Ease-of-use features include an extra-large paddle switch for comfortable operation, and a lock-on/off feature for continuous operation. The 9557PB weighs only 4. 5 lbs., with a side handle that can be easily installed on either side of the tool. In addition, the “tool-less” wheel guard adjustment provides easy clamping. This grinder also has an AC/DC switch for use with alternative-power sources. The 9557PB is a versatile and powerful grinder engineered for cutting, grinding and polishing applications. The 9557PBX1 is a kit that includes the Angle Grinder, 5 4-1/2” grinding wheels, metal tool case, cut-off and grinding wheel guards, as well as a Makita Diamond Blade with turbo rim engineering for constant contact with material for a smoother cut and finish.

From the Manufacturer

This powerful 7.5 Amp Makita angle grinder has an exclusive labyrinth construction that seals the motor and bearing from contamination.The 9557NBX features a switch (AC/DC) that is conveniently located on the top of the motor housing and a small circumference barrel grip for easy handling. 4-1/2" Angle Grinder AC/DC, 7.5A Motor For Heavy Professional Grinding Applications, Spindle Lock For Easy Wheel Changes, Small Circumference Barrel Grip For Easy Handling, Side Handle Can Be Installed On Either Side Of Tool For Operator Convenience, Switch Is Located On Side Of The Motor Housing; Lock-On Feature, Grinder Includes: 4-1/2" Grinding Wheels, Side Handle & Wheel Guard, Includes Extra Diamond Wheel and carry case.

• Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds)
• Small diameter barrel grip (only 2 to 1/2 inches) for added comfort
• Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
• Lock on/off feature for continuous operation
• AC/DC switch for use with alternative power source
• Protective zig zig varnish seals the armature from dust and debris for longer tool life
• Extra large paddle switch for comfortable operation

User questions & answers

Question:	Does it include the correct cutting tool for metal? Looking to cut aluminum
Answer:	No it does not include a metal cutting wheel. I’m assuming you mean the cutting wheel as the grinder the tool. The only items that come with is tool is the items listed.
Question:	Hello
Answer:	My grinder was made in China, along with the case and attachments. Makita Corp is in Japan, but as with all tool manufacturers they have component plants in cheaper labor counties even if they have assembly plants in higher wage countries. But my Makita's of late, all seem to be made and assembled in China.
Question:	The product description indicates that this is a variable speed grinder "Speed:2800 rpm [Min], 10500 rpm [Max]". Is this correct
Answer:	The model I received, Makita 9557PBX1 4-1/2-Inch grinder, is not variable speed. Nowhere on or included with the grinder indicates variable speed - only one speed, no load 10,000 rpm.
Question:	The product listing says this grinder package come with various accessories, but the ad says "style: tool only". does this come with the accessories
Answer:	Yes it comes with all the accessories, I don't know why it says "tool only". But be aware that the description mentions features that the tool does not have: no soft start, no AC/DC switch, no rotatable head unless you remove 4 screws.

Product features

Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle Grinder

Makita’s 4-1/2” Cut-Off/Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Cut-Off/Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.

Ease-of-use features include an extra large paddle switch for comfortable operation, and a lock-on/off feature for continuous operation. The 9557PB weighs only 4.5 lbs., with a side handle that can be easily installed on either side of the tool. In addition, the 'tool-less' wheel guard adjustment provides easy clamping. This grinder also has an AC/DC switch for use with alternative-power sources.

The 9557PB is a versatile and powerful grinder engineered for cutting, grinding and polishing applications.

The 9557PBX1 is a kit that includes the Angle Grinder, 5 4-1/2” grinding wheels, metal tool case, cut-off and grinding wheel guards, as well as a Makita Diamond Blade with turbo rim engineering for constant contact with material for a smoother cut and finish.

Product description

DEWALT DCG413B 20V XR Brushless 4.5-Inch angle Grinder features a DEWALT Brushless motor which delivers up to 57% more run time over brushed. This single speed motor offers a No load speed of 9, 000 max RPM's. It has a Paddle swith to operate; the brake is engaged as soon as the Paddle switch is released, bringing the wheel quickly to a stop. This tool also offers a 2-Position side handle for user comfort and convenience. Specifications: wheel diameter 4.5 inches, Arbor size 0.625 inches, metal motor bearings, Paddle switch, single speed. *This is a baretool item, battery sold separately. Includes: 1) angle Grinder.

• Dewalt Brushless Motor: Delivers Up to 57 Percent More Run Time over Brushed
• No Load Speed: Max 9, 000 RPMs
• Blade brake: brake engaged when paddle switch is released, bringing the wheel quickly to a stop.Max Watts Out:850 W
• Warranty: backed by DEWALT 3 year limited warranty
• Battery & Charger Sold Separately
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is this variable speed
Answer:	Yes, that's exactly what I use them for. Polishes 1080 and 1095 high carbon to a mirror finish.
Question:	How is the paddle switch on this compared to the trigger switch like all the other cordless grinders
Answer:	Yes, but soft metals. Aluminum, brass, copper, silver, gold. May not do what you want with stainless steel or high carbon steels.
Question:	Although the product description says it's ideal for electricians, do you think I could cut concrete if I were to use a 4 1/2 in diamond blade
Answer:	I found after 1000 grit, buffing with a good compound gave me a mirror finish. And I used a wet stone to sharpen. 1000 grit was the highest I used in sandpaper.
Question:	can I use 20V MAX Lithium Ion 5 AH battery for this tool? 5 AH is the correct one or no
Answer:	Yes! Silicon Carbide is recommended for use on stone.

Product description

Features:

This universal dust shroud fits almost all 4inch-5inch angle grinders . It's made of polycarbonate for improved visibility and durability.With this dust shroud, it can capture up to 99% of airborne dust, helps reduce user exposure to harmful silica dust,protect your health and keep the working area clean.



Applicable models

This universal Grinder dust shroud fits Makita，FLEX，BOSCH，DEWALT，METABO，HILTI，FESTOOL，STANLEY，RYOBI，EINHELL and HERZO machines, including models:

Makita: XAG13PT1, XAG13Z1, XAG11Z, XAG20Z, XAG17ZU, XAG21ZU, GA4530X, GA4530, GA403A, GA9557NB, GA9564P, GA9565PCV, GA4542C, GA5042C, GA9558PB, GA9557PB, GA9566CA, GA9005B, GA9564CV

FLEX: L8-11 115, L8-11 125, LE9-11 125, L10-11 125, L1506VR, L14-11 125, LE14-11 125, L3406, LB17-11 125, LBE 17-11, L15-10 150, LE14-7 125 INOX

BOSCH: GWS7-115, GWS9-125, GWS11-125, GWS12-125, GWS12-125ZCP, GWS13-125, GWX9-115

DEWALT: DWE4214, DWE4222N, D28110, DEW402N, DWE43214

METABO: MTBN600371420, MTBN600380420 , MTBN600562420, MTBN600552420, MTBN601236420, MTBN600418420

HILTI: AG500-12D, AG500-7SE, AG500-11S, AG700-14D, DCG125/500, DEG125/500, AG125/500-A22, AG150/500-A36, AG125/500-A36, AG125-13S, AG500-11S, AG125-15DB, AG500-12D

FESTOOL: ACG18, DSC-AG125FH

STANLEY: FMEG210-QS, FME811K

RYOBI: R18AG-0 ONE+, RYBRAG800

EINHELL: BT-AG850

HERZO: HAG45X



Specifications:

Condition: 100% Brand New

Material: Plastic + Alloy

Suitable Angle Grinder: 4inch- 5inch

Quantity: 1pc



If you have any questions, please feel free to contact us.

• 【Applicable models】- Can be installed on more than 95% of 4" / 4.5" / 5" angle grinders；
• 【Brush ring】-Grinder dust shroud has a Brush ring on the edge, which is not easy to lose hair, which can effectively prevent dust from running away;
• 【Durable】-Grinder shroud weighs 0.6kg, which is thicker than similar products and has a long service life;
• 【Installation】-A new generation of grinder dust shroud is more convenient to install and the product packaging contains installation instructions.
• 【Free Accessories】- 1 hook wrench, 3 clamping connections, 1 lock washer 5.5 mm, 1 steel ring. Allows the hood to be mounted on different angle grinders

User questions & answers

Question:	Will this fit a Skil 9295 x 4.5" grinder
Answer:	Hello buyer, no problem, can be installed and used together
Question:	Does this come with the vaccum hose attachment
Answer:	It does not come with a vacuum attachment
Question:	Will this fit the Dremel ultra saw
Answer:	Not fit
Question:	Will this fit a ryobi AG
Answer:	Yes it will. I used Ryobi AG403, but they all have the same diameter attachment.

Product description

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

• 7 amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection
• One-Touch guard eliminates the need for a tool to adjust the guard location
• Hex wrench replaces spanner wrench - hex wrench is found in most tool boxes if lost
• Quick-Change wheel release allows tool-free wheel removal without the need for a wrench
• 2-position removable side handle provides increased comfort and control
• Slim, ergonomic body design provides increased comfort in extended use applications
• 5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories

User questions & answers

Question:	What kind of grinding discs does it take
Answer:	I would check the pinion gear in the head. Mine when I bought it had hardly any good grease in it and made noises. After apply a good amount of grease and 1 tablespoon of 90w gear oil runs fantastic.
Question:	Are the brushes replaceable
Answer:	4"
Question:	Do the grinding wheels come with it
Answer:	I rarely even use the wrench. I just use the lock button and grab the wheel and give it a twist
Question:	Does the switch stay on hen you let go or do you hold it while grinding
Answer:	This grinder accepts 7/8 already

Product features

DEWALT DWE4011 4-1/2-Inch Small Angle Grinder

The DEWALT DWE4011 features a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It has a low profile, jam-pot gear case which increases durability and allows tool to fit into tight spaces. It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

Product description

Powerful, efficient, and easy-to-operate, the DeWalt D28499X Heavy-Duty Large Angle Grinder provides dependable, professional performance no matter what the job. Its 5.3 HP, 15 Amp, 6,000 RPM motor with overload protection ensures higher operating speeds, even under heavy loads, so you get smooth, more precise finished products. A keyless design allows you to make guard adjustments without stopping to look for special tools, so you can set-up for specific jobs quickly. A lightweight body, rotating rear handle, and five-position side handle provide improved ergonomics to give you more control over your work and let you can work longer and more comfortably. This tool comes with 7- and 9-inch guards, and it offers a low-profile gearcase that allows you to work in tight spaces where other grinders don't fit.

Designed to stand up to long-term heavy-duty use, this grinder offers an epoxy-coated field and armature that protects against abrasion from airborne debris, an automatic turn-off feature that shuts down the tool when brushes need to be changed to avoid tool damage and save you money, and a two-wire double insulated "S" jacket rubber cord for extended life in both hot and cold climates.

From the Manufacturer

DEWALT D28499X Heavy-Duty 7-Inch/9-Inch 5.3 HP Large Angle Grinder

• High power 5.3 hp (maximum motor hp) 6,000 rpm motor with overload protection provides higher operating speeds under load
• Epoxy coated field and armature provide long service life against abrasion from airborne debris
• Keyless adjustable guard provides tool-free guard adjustments, increasing productivity
• Rotating rear handle provides improved ergonomics in cutting and grinding applications
• Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage 6,000 rpm provides optimal material removal with 9-inch grinding wheels

User questions & answers

Question:	How thick of steel would this cut/good for cutting large stock
Answer:	The label on the Grinder say's. Dewalt Industrial Tool Co. 701 East Joppa Rd. Baltimore,MD 21286 For Service Info Call 1-800-4-DEWALT WWW.DEWALT.COM MADE IN CHINA
Question:	does it comes with its carrying case
Answer:	Listed as 5.3 peak HP. 5.3 HP = 3952 watts. 3952/120v = 32.9 amps (peak).Can't find steady amps but I'd put it on the level of a 14" cut-off saw. I've thrown breakers in one shop with this grinder. It's fine to run off most shop plug-ins and engine drive welders.In order to cut with this much power and a wider 9" disc, they have to make the cutting blades thicker. Cutting isn't much faster at all than with a smaller grinder with a thin disc. This is really just for heavy grinding and ideally in an ergonomical downwards position or by a geniunely strong person if out of position for long.
Question:	where is this made
Answer:	The ones I purchased are steel
Question:	They seem to be hiding the amperage of the tool. I buy based on the amp size of the motor. How many amps is it
Answer:	5" long with 2" of it is the brush

Product description

The DEWALT DWE4222N 4.5" Small Angle Paddle Switch Grinder with Brake and No Lock On features an 11Amp 1400 MWO motor which provides high operating speeds under heavy loads, with the Lanyard Ready integrated lanyard connection point. The brake slows the grinding wheel 50% faster once trigger is released as compared to DWE402 with DW4541 Wheel. It offers a One-Touch guard that allows for quick and easy guard adjustments with a single action. It also has the Dust Ejection System that contributes to long motor life. The E-Clutch activates in less than a tenth of a second when a wheel pinch/stall event is detected. Includes: DWE4222N Grinder, Side Handle, Backing Flange, Flange Nut, 4.5" T27 Guard, Hex Key Wheel Wrench. (Lanyard Not Included).

• 11Amp, 1400 MWO motor for high operating speeds
• One-Touch guard that allows for quick and easy guard adjustments
• Dust Ejection System for long motor life
• E-Clutch activates in less than a tenth of a second
• Lanyard Ready integrated lanyard connection point

Product description

The Bosch GWS10-45P 4-1/2-Inch Angle Grinder with Paddle Switch provides a multi-grip paddle switch for user control and comfort. It also delivers more power than previous-generation models - 10 amps and 11,500 rpm. It has directed air flow that diverts dust away from vital components and it has direct-motor cooling, giving it higher overload capabilities. For operator comfort and control, it sports a two-position Vibration Control side handle, making it less jarring to run. It was designed for all-day jobs in machinery manufacturing, metal fabrication and construction. It has a burst-protection quick tool less adjustable guard and a large spindle lock for more convenient disc change. The Service Minder brushes stop the grinder when preventative maintenance is required.

• Paddle switch provides for multiple, comfortable grip positions
• Powerful motor - 10 amps and 11,500 rpm
• Carbon brushes - more durable than previous-generation brushes
• Direct-motor cooling for higher overload capabilities
• Two-position Vibration Control side handle for more user comfort

User questions & answers

Question:	what arbor size is this angle grinder
Answer:	Thank you for your inquiry. The arbor size for GWS10-45P (4-1/2 In. Angle Grinder with Paddle Switch) is 7/8". If you have further questions you may contact us at 1-877-BOSCH99 (1-877-267-2499).
Question:	Reviewers of the preceding model mentioned this grinder not being compatible with a knotted wire cup brush. Why was that and does that apply here
Answer:	Thank you for your question. The GWS10-45P will accept a knotted wire cup wheel, however, there are safety warnings regarding it. Examples: wire bristles are thrown by the brush even during ordinary operation. Also, if a certain wire wheels recommended using a guard need to make sure there is no interference of the wheel or brush with the guard. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	According to the product iformation, it weighs over 2,000 lbs. It doesn't look like it literally weighs a ton.What is the actual weight
Answer:	Thank you for your question. The GWS10-45P weighs approximately 5 pounds. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Are these still made in germany? I picked up the ergo "45PE" model had the worst flimsiest trigger ever, made in china, instant return
Answer:	The country of origin of the GWS10-45P is in Germany and the country of origin of the GWS10-45PE is in China. Robert Bosch Tool Corporation utilizes a global manufacturing strategy, which incorporates a global network of suppliers with our worldwide manufacturing locations in regions such as Asia, Europe, and the United States. Our manufacturing facilities around the globe are all owned and operated by the Bosch Group and maintain the highest quality standards. You can be assured that whatever country your Bosch product was made in, it will be made with the quality you would expect from Bosch. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Bosch GWS10-45P Angle Grinder with Paddle Switch, 4-1/2"

The Bosch GWS10-45P 4-1/2- In. Angle Grinder with Paddle Switch provides a multi-grip paddle switch for user control and comfort. It also delivers more power than previous-generation models - 10 amps and 11,000 RPM. It has directed air flow that diverts dust away from vital components, and it has direct-motor cooling, giving it higher overload capabilities. For operator comfort and control, it sports a two-position Vibration Control side handle, making it less jarring to run. It was designed for all-day jobs in machinery manufacturing, metal fabrication and construction. It has a burst-protection quick toolless adjustable guard and a large spindle lock for more convenient disc change. The Service Minder brushes stop the grinder when preventative maintenance is required.

Product description

The Makita 7 in. Angle Grinder is built around a powerful 15 amp motor that delivers up to 6, 600 RPM for fast stock removal. It features labyrinthine construction that helps seal Internal components from outside contaminants to help increase tool life. The easy-to-use large trigger switch locks on for extended operation, and a large shaft Lock permits easy wheel changes. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control. A 7 in. Grinding wheel is included.

The Makita 7-Inch 15 Amp 6000 RPM Angle Grinder handles the toughest industrial applications with superb performance. It features an anti-dust varnish and labyrinth construction for protection from dust and debris. The gear housing rotates 90 degrees for heavy-duty cutting applications and the brushes are externally accessible for convenience and long life. This grinder set includes: 7-inch grinding wheel, side handle, wheel guard, inner flange, lock nut, lock nut wrench, and operating manual. The grinder measures 18-5/8 inches long and weighs 10.4 pounds. It is backed by a one-year warranty.

What's in the Box

Grinder, 7-inch grinding wheel, side handle, wheel guard, inner flange, lock nut, lock nut wrench, and operating manual.

From the Manufacturer

Makita GA7021 7" Angle Grinder, 15 Amps, 6,000 RPM

• Powerful 15 amp motor delivers 6, 600 RPM to handle the most demanding applications
• Rubberized soft grip handle provides increased operator comfort
• Rear trigger switch with lock-on for operator convenience
• Tool-less wheel guard for quick and easy adjustments
• Large rubber tool rest protects work piece from damage
• Three position adjustable side handle for operator convenience
• Spiral bevel gears for smoother rotations and a more efficient transfer of energy

User questions & answers

Question:	Can you attach a 4" concrete disc to this machine and if yes please state what type to buy as that is what i really need it for to cut concrete w
Answer:	No. Mine is 7/8 inch arbor.
Question:	Would you know if the back handle (where the switch is located) rotates
Answer:	No It comes in a cardboard box
Question:	Does this come with a 5/8" arbor
Answer:	if you can hold the machine....it will cut it.
Question:	Does it come in a case and if so what type
Answer:	No. The one I bought from Amazon did not have a case. You could probably go to Harbor Freight and get a hard or soft case for about $10-15. It is a big and heavy grinder but it makes short work of big jobs. We used it for paint stripping on concrete. Cut-off wheels will cut 1/2" thick cold rolled 1018 steel like nothing.

Product features

Makita GA7021 7" Angle Grinder, with AC/DC Switch

The Makita 7 in. Angle Grinder is built around a powerful 15 Amp motor that delivers up to 6,600 RPM for fast stock removal. It features labyrinthine construction that helps seal internal components from outside contaminants to help increase tool life. The easy-to-use large trigger switch locks on for extended operation, and a large shaft lock permits easy wheel changes.

Product description

The DEWALT DWE43116 4-1/2"- 6" high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT'S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5" type 27 guard, 1) 5" type 27 guard, 1) 6" type 27 guard.

• 13 amp motor / 9,000 RPM
• Dust Ejection System technology designed to protect the tool from damaging dust and debris that enters through air intake vents
• 4.5" type 27 guard, 5" type 27 guard, 6" type 27 guard
• Trigger switch (no trigger lock)

User questions & answers

Question:	Does this tool come with flat wrench for changing grind head
Answer:	The DWE43116 is electric corded.
Question:	Can you rotate the head of this grinder ? By removing and reinstalling the screws
Answer:	My experience with the grinder does NOT have any automatic shut-off function. A pinch situation (whether manually controlled or in the locked-trigger function) will NOT engage any safety feature at all.
Question:	Is this unit air powered as the description say's it is
Answer:	This is designed for 7" grinding wheel. To cut concrete a dimeond disk will work.
Question:	The description says the grinder will shut off if a pinch is detected but the manual says the dwe43116 does NOT have this feature. Which is right
Answer:	Copied from description. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control.

Product description

Angle Grinder, Voltage 120VAC, Wheel Dia. 7 In., No Load RPM 8500, 15.0 Amps, Spindle Thread Size 5/8 In.-11, Switch Type Paddle, Tool Length 17-1/2 In., Speed Type Single, Lock-on No, Lock-off Yes, Handle Design Rat Tail, Cord Length 8.0 ft., Features Anti-Vibration, Tool-Free Guard Change, Side Handle, Large Angle Grinder, Power Coated Stator and Epoxy Coated Windings, Protection Against Dust and Debris, Tri-Control Switch, Service Minder Brushes with Removable Brush Cover

From the Manufacturer

Maximum Power at Minimum Weight - Up to 20% lighter than comparable tools

• Country Of Origin: Germany
• Package Weight: 6.35 Kilograms
• Package Height: 58.42 Centimeters
• Package Length: 12.7 Centimeters

User questions & answers

Question:	Will this grinder use type 1 blades ( ie. segmented concrete saws
Answer:	Thank you for your inquiry. The GWS13-50VSP Angle Grinder has a speed dial on the back of the unit to adjust the speed. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Question:	The documentation claims 4hp 2.982 kw),domestic circuits in the us run 120v/15a (1.8kw). under full load, will this continuously fault
Answer:	Just about any angle grinder with the proper diamond blade can be used for tuckpointing but I wouldn't recommend this one due to it's very awkward paddle switch which I hated so much I sent mine back for a refund and purchased a different model.
Question:	Where is it made
Answer:	Thank you for your inquiry. The GWS13-50VSP Angle Grinder country of origin is Germany. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	does this grinder lock on
Answer:	Thank you for your question. The GWS13-50VSP has a 5/8-11 arbor size. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).

Product description

The Bosch GWS8-45 4-1/2-inch angle Grinder is a light, ergonomic Grinder, with a slender grip circumference that allows users to work comfortably for extended periods. This 4.2 lbs. Tool delivers plenty of power, with a 7.5-Amp motor that produces 11,000 no-load RPM. It has directed air flow that diverts dust away from vital components. Bosch service Minder brush system shuts off the tool when preventative maintenance is required, which helps to eliminate guesswork. This Grinder has a two-position side handle. It has a burst-protection quick adjustable guard designed for user protection, a fast-change Disc change and a large spindle lock. Includes: auxiliary handle; wheel guard; flange Kit; Spanner wrench; 4-1/2-inch abrasive wheel.

• COMPACT: Weighing only 4.2 lbs., the Bosch GWS8-45 Angle Grinder is lightweight and compact. Its slender grip circumference allows users to work comfortably for longer.
• POWER: The angle grinder features a powerful 7.5-amp motor to produce 11,000 no-load rpm for professional cutting and grinding applications.
• ERGONOMIC: With its slim-grip design, the GWS8-45 angle grinder provides outstanding user comfort. Its two-position side handle allows for greater control and utility.
• PROTECTION: The grinder also provides directed air flow to divert dust from vital components for enhanced durability and longer tool life. The burst-protection guard provides quick adjustments for user security.
• LONGEVITY: Bosch's Service Minder brush system shuts off the tool when preventative maintenance is required, extending overall tool life.

User questions & answers

Question:	What size arbor does this grinder have
Answer:	Yes. It will fit
Question:	Which type of 40 grit flap discs is it compatible
Answer:	Not sure if it is a 5.5" pad but it is designed to work with a 5" backing plate
Question:	How many watts will this grinder draw
Answer:	I'm not certain if they are exactly 5.5 but the is a little over hang on a 5" backing plate to keep from banging the plate against something. Certainly no as much as a foam pad. But dont let that discourage you they are wonderfull pads.
Question:	is this made in germany
Answer:	It should fit. The light comes with 2 different thread attachments.

Product features

GWS8-45 4-1/2-Inch Angle Grinder

The Bosch GWS8-45 4-1/2-Inch Angle Grinder is a light, ergonomic grinder, with a slender grip circumference that allows users to work comfortably for extended periods. This 4.2 pound tool delivers plenty of power, with a 7.5-amp motor that produces 11,000 no-load rpm. It has directed air flow that diverts dust away from vital components. Bosch's Service Minder brush system shuts off the tool when preventative maintenance is required, which helps to eliminate guesswork. This grinder has a two-position side handle. It has a burst-protection quick adjustable guard designed for user protection, a fast-change disc change and a large spindle lock.

Includes:

Auxiliary handle; Wheel guard; Flange kit; Spanner wrench; 4-1/2-Inch abrasive wheel.

Professional power

Powered by a 7.5-amp motor and rated at 11,000 no-load rpm, the Bosch GWS8-45 delivers all the power needed but in a compact package. The user is able to get more done, faster, with this grinder. And it has directed air flow that diverts dust away from switch and vital components.

Service minder brushes

The angle grinder was engineered with Service Minder brushes, which stop the grinder when preventative maintenance is required, eliminating guesswork. The carbon brushes provide outstanding lifetime. The tool also was designed with direct-motor cooling, giving it higher overload capabilities and extending runtimes.

Comfort and convenience

The Bosch GWS8-45 Angle Grinder was built to provide all-day operator comfort, with a slim grip, a lock-on side switch for continuous operation and an ergonomic design. This light (4.2 Lbs.) and compact tool still delivers professional power. The grinder features a two-position side handle that can switch from left to right, for additional control.

Adjustable burst guard

This angle grinder was designed with a quick adjustable guard. The burst-protection guard allows for advanced user protection. The tool also has a fast-change disc change and a large spindle lock allow for more convenience and easier change of accessories.

Product description

The G18ST 7" disc grinder deburrs die cast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

• Same tools. New name. Hitachi power tools has renamed to Metabo HPT
• 7 Inch Angle Grinder with 15 Amp Motor
• Includes: G18ST Angle Grinder, Side Handle and Two Wrenches
• Powerful 15 amp motor produces forcible 3950W output for plenty of power, torque and durability for tough jobs
• Lightweight design for reduced fatigue and improved control
• Class leading overload durability for increased life and reliability
• Halved stator design creates better cooling efficiency and ensures high motor durability

User questions & answers

Question:	This grinder is advertised as 7 inches. can i use a 3m 8 inch hookit soft pad on this grinder for sanding if i remove the shield
Answer:	Hi there! This comes with a Type 27 Grinder guard. Hope this helps!
Question:	what are the rpm
Answer:	The Hitachi HPT 7" grinder I purchased was made in Japan, I believe the Metabo HPT 7" is listed as the replacement model.
Question:	What kind of protective guard does it come with
Answer:	No, an allen wrench is now supplied instead of the wrench. The allen wrench will have the same capability.
Question:	What country it made
Answer:	No, the head is not adjustable.