12 best new corded drills

Product description

The Black & Decker LBXR20 20 Volt MAX Extended Run Time Lithium Battery is compatible with the 20-Volt MAX line of power and gardening tools. These batteries have been formulated for longer runtime and improved performance. This battery is compatible with cordless tool models BDC120VA100, BDCDMT120, BDCDMT120-2, BDCDMT120F, BDCDMT120IA, BDCF20, BDH2000SL, LD3K220, LCC220, LCS120, LCS120B, LD120VA, LDX120C, LDX120PK, LDX120SB, LDX220SB, LDX220SBFC, LGC120, GLC120B, LHT210, LHT2220, LHT2220B, LLP120, LLP120B, LPHT120, LPHT120B, LPP120, LPP120B, LST220, LSW120, LSW20, LSW20B, SSL20SB, SSL20SB-2.

• Ideal for drilling into wood, metal plastic and all screw driving tasks
• Chuck Size: 3/8 inch; Clutch Setting: 11; Included Components: LDX120 Drill/Driver, LBX20 20V MAX* Lithium Ion Battery, LCS20 Charger, Double Ended Bit; Power Source: Cordless
• Lithium Ion Technology & 20V MAX: Lighter, more compact, no memory, longer life
• 11 Position Clutch: Provides precise control for drilling into wood, metal, plastic, and all screwdriving tasks
• Compact and Lightweight: Less fatigue and allows users to drill / screw in confined spaces. Part of the 20V MAX System A System that Demands Attention
• Variable Speed: Allows countersinking without damaging material

User questions & answers

Question:	does it come with a light
Answer:	Yes, this hose is 4.0 I.D. X 75.0 LG.
Question:	Can i leave it charging over night without harming battery
Answer:	I ended up buying a totally new bag both of my closures failed. You can't fill the bag too much or those wing nuts tear loose from the bag. I use these to support the bag closure spring clamps. Just clip them along the edge after you fold the flaps over to close the bag. I use 2 clamps. Here's something like what I use. https://www.amazon.com/Lenox-Tools-VGP58100-Quick-Grip-Spring/dp/B00002244Z/ref=sr_1_4?ie=UTF8&qid=1543928604&sr=8-4&keywords=Irwin+spring+clamps
Question:	Does it come with charger and battery
Answer:	I have ordered and used it It is a quality replacement bag.. A bit expensive but good as original equipment
Question:	Is this drill sized and weighted well for use by a woman
Answer:	If you have the bag opening past the lip where the snout bolts on the bag will not come off. I cut the rear snout off behind the flange and put my bag on past the flange and it doesn't loosen. The cinch strap just needs put through the catch properly, with the teeth against the inserted end, so it stays tight.

Product description

The Black & Decker DR260C 5.5 Amp 3/8" Drill/Driver is powerful and compact, capable of handling tough tasks in tight spaces. This drill operates from 0-1,500 rpm, features a keyless chuck for quick and easy bit changes, along with variable speed for controlled drilling and driving. The on-board bit storage allows for quick access to screwdriving bits. This drill is perfect for drilling holes in wood, metal and plastic, and driving screws to fasten a variety of material. Includes: DR260 Drill/Driver, Double-Ended Screwdriving Bit.

• Powerful and Compact to get the job done
• Variable Speed for control during drilling/driving
• On Board Bit Storage for convenience
• Chuck Size: 3/8 in; Included Components: DR260 Drill/Driver, Double-Ended Screwdriving Bit

User questions & answers

Question:	Does this drill have an electric brake? When you let go of the trigger,does the bit stop spinning immediately
Answer:	No, it doesn't, it will continue to spin after you let go of the trigger. At least when you just hold it in the air. In practice when you're drilling something in, I haven't found it to keep going, even with small screws.
Question:	I have to drill some screws into mdf. There are no pre-drilled holes. Is this what I want
Answer:	This drill has no clutch so unless you are pretty familiar with these drills it has the potential to get away from you when the screw bottoms out.
Question:	is this drill powerful enough to attach the 'power cone' attachment for polishing the chrome wheels on my car
Answer:	I'm not sure how much power your device requires but I've found this drill to be very powerful for all my normal drilling operations.
Question:	I cannot insert the drill bit - My chuck is too tight and I cannot get it to open. I have followed the instructions in the manual. Help
Answer:	At first I had the same problem, and after spraying a little WD-40 between the chuck and the ribbed area it opened immediately. Like magic! Hope this helps anybody with this problem.

• 🎁【❤ The Best Gift 2020】🎁
• ▲【 POWERFUL 6AMP MOTOR】710W 6Amp Powerful motor drives the hammer drill to a high speed of 2800RPM; Come with rich accessories, ideal for installing chandelier, procesandoing furniture, wall, door, and other DIY job for the metal, glass, stone and wood, which means that most of your needs can be met
• ▲【 HAMMER & DRILL 2 FUNCTIONS IN 1】With a dual-mode selector, just switch it to easily convert drill and hammer drill function, hammer drill function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts; The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic
• ▲【 VARIABLE SPEED TRIGGER & FORWARD AND REVERSE SWITCH】Comes with a variable speed trigger(0-2800 RPM), this hammer drill allows you to set any speed of your choice, which responds to the amount of pressure you apply, offers a greater degree of speed control. Forward and reverse function can be easily switch according to your tasks, such as complete the job of tightening or loosening screws
• ▲【 360° ROTATING AUXILIARY HANDLE & METAL KEYED CHUCK】With the adjustable anti-skid auxiliary design, the rotating auxiliary handle adds flexibility and offers a better grip, convenient for operation at any angle. The metal chuck achieves more precise control, it's keyed design is much safer than normal chucks where the drill bit can slip in some cases, and it is suitable for drill bits with diameter (≤1/2 inch) to meet your various requirements
• ▲【 10 DRILL BITS SET】10Pcs different sizes, different materials drill bits make this electric drill set an ideal tool for different kinds of applications and you can choose one for yourself accordingly, such as drilling into wood, metal, plastic, masonry and concrete

Product features

TACKLIFE 1/2-Inch(13mm) 6AMP/2800RPM Corded Dual Hammer Drill for Dry Wall, Wood, Stone, Steel with 10Pcs Drill Bits, Depth Gauge, Handle - PID01A

TACKLIFE 1/2-inch hammer drill features a pure copper motor of 6Amp, offering strong power to the drilling work, rotating speed can be up to 2800RMP, 12 dials variable speed knob and trigger allow you to choose the exact speed for different tasks. With a metal chuck, it is easy to change drill bits within a diameter of 1/2 inch(13 mm). The compact body, weighs only 5.5lbs, makes it an ideal drill for different working scenes.

Hammer & Drill 2 Functions in 1

• Before starting drilling, choose the hammer or drill function by switching the button on the top of the machine.
• The Hammer function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts.
• The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic.

PLEASE NOTE:

This hammer drill can't be used in reinforced concrete walls.

Variable-speed Trigger and Knob & Forward and Reverse Button

• The speed knob with 12-levels speed dial, which allows you to set a maximum speed before drilling.
• The variable-speed trigger allows you to change the speed for different applications.
• The lock-on button keeps one speed permanently to free your finger for long hours working.
• Forward & Reverse switch provides more convenience to tighten and loosen screws.
• The metal chuck achieves more precise control, it's keyed design provides greater grip of the drill bit and prevents the drill bit from falling off during work

Practical 10 Drill Bits Set

5 Twist drill bits for steel plate and wool(mm) : 4/5/6/7/8

5 Drills bits for brick(mm) : 4/5/6/7/8

Scaled Depth Gauge

The detachable depth rod allows you to determine exactly how deep the bit should go to meet the individual requirements of the task.

Rotatable Side Handle

360° rotatable side handle enables you to choose the best grip for your drilling work. Without any tools, the handle can be quickly installed and removed.

Product description

The DEWALT DWE1014 3/8" 0-2,800 rpm VS Drill with Keyed Chuck features a powerful 7.0 amp motor which gives the user the power to get the job done! It has a compact pistol grip design that allows for user comfort with a light weight design decreases user fatigue. The user-friendly lock-on switch reduces user fatigue allowing for extended usage. This drill also has a variable speed trigger switch which gives the user greater versatility. This unit also includes a chuck key. Lock-On switch reduces fatigue

• The product is 3/8", Heavy Duty, VSR Drill
• Easy to use
• The product is manufactured in China
• A powerful 7.0 Amp motor
• Compact and Lightweight design
• Variable speed trigger

User questions & answers

Question:	Este taladro es de los que hay que ponerle carbonos de reeplazo
Answer:	It appears that the lock button only works at full speed. I had not tried it at lower speeds before, so when I did, I found that it only engaged when the trigger was fully depressed (full speed). I'm not sure if that is how it is supposed to work, but that's how mine does. It is not an issue for me. This unt is lightweight with lots of torque....it's trigger is sensitive to speed variations, and the reverse works well too.
Question:	Does this drill have a rubber cord that remains flexible in cold weather
Answer:	I guess it would matter on what you planned on using the drill for. I assume your a person who just wants a drill to use occasionally around your house. Either drill would be a good pick for a DIY'er. If your looking for a lightweight drill and something that can manuver in tight area's I would suggest the Porter Cable. But the Skil would do a better job in certain situations because it has lower speed but probably heavier torque which would perform better in driving screws in or drilling large holes in hardwoods.with the larger chuck you would be able to use bigger bits which generally do not fit a 3/8 in. chuck. Go with the Skil , it's going to give you more options but it's not a huge professional 1/2 in drill that might be over kill on your household projects.
Question:	Is it powerful enough to sharpen a mower blade with an attached sharpening stone
Answer:	The drill does have forward and reverse, but I do believe drill bits are designed to drill in the forward motion. Their may be specialty bits that will drill in reverse, but I'm not 100% sure on that.
Question:	Can this drilling machine used for metal and concrete
Answer:	Yes. This drill has enough power to pass a bill through the House of Representatives and Senate without getting vetoed by the President.

Product description

Versatile and easy to handle, the DEWALT DWD115K 3/8-inch VSR mid-handle drill kit with keyless chuck delivers the power you need in a light-duty drill for all your drilling and fastening projects. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable mid-handle grip so you can work smarter for longer.

3/8-Inch VSR Mid-Handle Drill Kit with Keyless Chuck At a Glance: Reliable 8-amp motor Variable-speed control from 0 to 2,500 RPM Soft, non-slip rubber grip and lightweight design Three-year limited warranty, one-year free service, 90-day money-back guarantee

The VSR mid-handle drill is ideal for a wide range of drilling and fastening applications. View larger.

Mid-handle grip

Patented DEWALT-Built Motor with Overload Protection

With its powerful 8-amp motor, the DEWALT DWD115K 3/8-inch VSR mid-handle drill is capable of delivering speeds of 0 to 2,500 RPM. This translates to quick, versatile drilling and driving.

Designed for Versatility and Durability

The dependable DWD115K is versatile enough for common around-the-home tasks and light, job-site work. The reversible drill features a 1-inch capacity when working in wood with a spade bit, and it can handle a capacity of 1-1/8 inches when used in wood with a hole saw. When used in steel with a twist bit, the drill can handle a capacity of 3/8-inch.

Its 3/8-inch ratcheting keyless chuck tightens as you work to deliver greater bit retention, and the drill's ball-bearing construction provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD115K is built to allow ergonomic hand positioning, and its soft grip and well-balanced design offer improved user comfort and better overall command of the drill. It also weighs an easy-to-manage 4.1 pounds, decreasing user fatigue after extended use.

The 3/8-inch VSR mid-handle drill kit with keyless chuck comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

One DEWALT DWD115K 3/8-inch VSR mid-handle drill and kit box.

The DEWALT VSR mid-handle drill comes with a durable kit box for safe keeping.

• 8-amp motor delivers high performance in heavy-duty applications
• 3/8-inch all-metal ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM VSR trigger for versatility in drilling and fastening applications
• Mid-handle grip design with soft grip provides increased balance and comfort
• All ball-bearing construction provides greater durability and longer tool life

User questions & answers

Question:	Is there a lock on the trigger to keep the drill in the "on" position
Answer:	No, it doesn't, it will continue to spin after you let go of the trigger. At least when you just hold it in the air. In practice when you're drilling something in, I haven't found it to keep going, even with small screws.
Question:	Is it reversible drill
Answer:	This drill has no clutch so unless you are pretty familiar with these drills it has the potential to get away from you when the screw bottoms out.
Question:	I don't understand the comments saying this drill is useless as a screwdriver. Anyone else agree that this drives screws as easily as cordless drills
Answer:	I'm not sure how much power your device requires but I've found this drill to be very powerful for all my normal drilling operations.
Question:	What is the advantage of a mid handle grip rather than a pistol grip? I am a woman with average strength, inexperienced at DIY but want to learn
Answer:	At first I had the same problem, and after spraying a little WD-40 between the chuck and the ribbed area it opened immediately. Like magic! Hope this helps anybody with this problem.
Question:	Does this drill have an electric brake? When you let go of the trigger,does the bit stop spinning immediately
Answer:	Castor oil is a humectant, it does remove moisture from one place and transfers it to another. Its not a good thing to use in a dry climate. If you insist on using it, Its best to use at night before bed and wash off in the morning.
Question:	I have to drill some screws into mdf. There are no pre-drilled holes. Is this what I want
Answer:	It says that it is made in the USA
Question:	is this drill powerful enough to attach the 'power cone' attachment for polishing the chrome wheels on my car
Answer:	I would send a note to the seller to ask. The bars I got came with one white, one brown, and a nice silicone soap dish. The only difference in ingredients in the brown bar is that it contains olive particulates which make it more textured, for scrubbing. Both have olive oil. To me, they feel the same, smell the same, and have had the same effects on my skin. Love their products!
Question:	I cannot insert the drill bit - My chuck is too tight and I cannot get it to open. I have followed the instructions in the manual. Help
Answer:	The butter cream comes in a plastic, vacuum sealed container and their oil (same ingredients) comes in a dark amber glass container.

Product features

Highly Efficient Motor

The DWD115K Drill powers through tough jobs like a pro with ease, all thanks to the powerful 8 Amp motor that delivers 0-2,500 rpm speed, even for heavy-duty applications. . The unique feature of this drill in particular is the 3/8" all-metal, ratcheting, keyless chuck that makes a better bit retention possible.

Specially designed Mid-Handle Grip

Having is a solid grip on power tools and ease of handling is as important as a powerful performance. This Corded Drill from Dewalt, is designed with keeping ease of usage and handling in mind. The grip of the handle is placed in the middle to give the user increased balanced and control and the soft grip ensures comfort.

Durable

The drill is strategically designed with an all ball bearing construction that makes it durable. The Drill comes in a carrying case to keep it safe while carrying it outside.

Product description

Metabo HPT's new Corded Drill - D10VH2 is vastly improved over previous models featuring an all-metal keyless chuck for higher durability and better bit holding capability. Equipped with a higher amp motor to improve efficiency, and an added belt hook for convenience, the D10VH2 is the perfect tool for light drilling jobs in metal and wood. Its rubber over-molded handle adds comfort and improves control. The variable speed dial with lock-on is convenient for adapting to the task at hand, and reduces fatigue during continuous use applications. An easy to access forward and reverse button makes backing out a bit quick and easy, and can be operated with one hand. The new D10VH2 is the perfect addition to any tool box.

• POWER: Powerful 7 amp motor to power through the toughest jobs
• TORQUE: 117.7-In-lbs of max torque
• LIGHTWEIGHT: Only 3.3 lbs for greater ease of use and less fatigue
• TRIGGER: Variable speed trigger with dial for precise operation
• CHUCK: All metal 3/8 In. keyless chuck for greater durability and better bit holding ability
• BELT HOOK: Belt hook for convenient storage between job locations
• COMPACT BODY: Designed to fit in tight spaces
• WARRANTY: 5-Year base warranty

User questions & answers

Question:	Is it light enough for a small woman to use
Answer:	Yes. My wife is able to use mine.
Question:	So the Hitachi is a rebrand of this, or is this a rebrand of Hitachi
Answer:	This is the same product only with a new brand name. Hitachi rebranded its product line to Metabo HPT. I think HPT stands for Hitachi Power Tools. They kept the model number for them exactly the same. Hope this helps.
Question:	will this drive screws and if so up 2 what length of screws
Answer:	This drill has the torque (133.7 in-lbs) and speed (no load: 2700 RPM) to drive screws. It all depends on the length, type and application.
Question:	where is made from
Answer:	It is made in Spain.

Product description

Versatile and easy to handle, the DEWALT DWD110K 3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck delivers the power you need in a light-duty drill for all your drilling and fastening needs. Enjoy the drill's variable-speed trigger, convenient reversing switch, and comfortable pistol grip, so you can work smarter, longer.

3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck At a Glance: Reliable, 7 amp motor Variable-speed control from 0 to 2,500 rpm Soft, non-slip rubber grip and lightweight design Three-year limited warranty, one-year free service, 90-day money-back guarantee

A lightweight, versatile tool for all of your drilling and fastening needs. View larger.

Patented DEWALT-Built Motor with Overload Protection

With its powerful 7 amp motor, the DEWALT DWD110K 3/8-Inch VSR Pistol-Grip Drill is capable of delivering speeds of 0 to 2,500 rpm. This translates to quick, versatile drilling and driving.

Mid-Handle Grip

Designed for Flexibility and Durability

The DWD110K is flexible enough for common jobsite tasks. The drill's 3/8-inch ratcheting keyless chuck tightens as you work to deliver greater bit retention, and the ball-bearing construction provides added durability. The reversible drill features a 1-inch maximum capacity when working in wood with a spade bit, and it can handle a capacity of 1-1/8 inches when used in wood with a hole saw. When used in steel with a twist bit, the drill can handle a capacity of 3/8 inch.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DWD110K is built to allow ergonomic hand positioning, and its soft grip and well-balanced design offer improved user comfort and better overall command of the drill. In addition, it weighs an easy-to-manage 4.1 pounds, decreasing user fatigue after extended use.

The 3/8-Inch VSR Pistol-Grip Drill Kit with Keyless Chuck comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD110K 3/8-Inch VSR Pistol-Grip Drill and kit bag.

The DEWALT VSR Pistol-Grip Drill comes with a durable kit bag for safe keeping.

• 8.0 Amp motor delivers high performance in heavy-duty applications
• 3/8-inch ratcheting keyless chuck for greater bit retention
• 0-2,500 RPM, vsr trigger for versatility in drilling and fastening applications
• Soft grip handle design offers increased gripping surface and comfort
• All ball-bearing construction provides greater durability and longer tool life;

User questions & answers

Question:	Is the dwd110 also compatible to use with 220v
Answer:	The depth gauge, belt clip, and handle are included. There is no charger or battery included. The "Z" in the model name indicates that this is the tool only, get a non-Z if you also want a battery and charger.
Question:	Does anyone know the difference between this and the all metal chuck keyless drill (other than chuck made in metal
Answer:	Yes however, it would be overkill. This drill has a lot of torque.
Question:	how long is the cord
Answer:	115
Question:	Where is this drill made
Answer:	No. Buy the XT257 case

Product description

Features variable speed/reversing for drilling in a wide variety of materials, low decibel rating (79dB). in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2, 500 RPM No load speed, capacity in: steel- 3/8", wood- 1" And weighs 3.1 lbs. Includes keyless chuck and plastic tool case.

From the Manufacturer

This variable speed, reversible drill features a beefy 4.9 amp motor for powering through those tough jobs. Bit installation is a snap with the nifty keyless chuck system. The larger trigger switch won’t wear out your trigger finger. This baby is easy on the ears with a decibel rating of 79dB. Its clever inline handle design maximizes power thrust. A large, recessed lock-on button will get you through those long jobs. And to extend tool life, Makita designed this double insulated tool with all ball bearing construction, as usual. All this with a weight of just 3.1lbs, this drill is great for any worksite. Your purchase includes a sturdy tool case.

FEATURES

• Powerful 4.9 amp motor
• Keyless chuck for fast and easy bit installation and removal
• Large trigger switch for easy operation
• Variable speed (0 - 2,500 rpm) for drilling in a wide variety of materials
• Low decibel rating (79dB) for quieter operation
• In-line handle design for better control
• Large recessed lock-on button
• Reversing switch is conveniently located
• All ball bearing construction for durability
• Includes tool case for convenient storage of tool

What's in the Box

• Keyless chuck (763109-6)
• Plastic tool case (824043-A)

SPECIFICATIONS

• Capacities: Steel 3/8"; Wood 1"
• No load speed: 0 - 2,500 rpm
• Amps: (115V) 4.9
• Overall length: 10-9/32"
• Net weight: 3.1 lbs.
• Shipping weight: 6.7 lbs.

• The product is 4.9A 3/8" Vsr drill
• Easy to use
• The product is manufactured in United States
• Powerful 4.9 AMP motor
• Keyless chuck for fast and easy bit installation and removal
• Large trigger switch for easy operation
• Variable speed (0 - 2,500 RPM) for drilling in a wide variety of materials
• Low decibel rating (79dB) for quieter operation

User questions & answers

Question:	Does it have a built in bubble level
Answer:	No it doesn't have a bubble level.
Question:	does anyone know of a replacement chuck for this drill
Answer:	When my drill wore out, I just bought a new drill. No, I don’t.
Question:	The Makita 6408 is listed as having a variable speed. I can't find a way to adjust this.Is that how hard you press on the trigger like any drill
Answer:	Joanne you are correct! My drill speed is commensurate with the tension exerted upon the trigger this drill is light and powerful which is great since I have burned out quite a few drills over the years! This is now my go to drill....good luck!
Question:	will work on 220/240V
Answer:	No, this drill is not designed to be used on a 220/240V electrical system.

• ─🎁【Perfect Gift Choice】🎁─
• 🔶HIGH PERFORMANCE & All-METAL CHUCK - The 7.5Amp hammer drill has a no-load speed of 3000rpm, delivering powerful impact and hammer strength to complete heavy-duty projects on wood, plastic, wall, steel and brick which means that most of the work needs can be met. The all-metal chuck makes the bit more stable, that is important especially in some difficult jobs, which can reduce the swing and improve the accuracy of drilling.
• 🔶HAMMER & DRILL FUNCTIONS 2 IN 1 - Switch the black button on the top to select hammer drilling or drilling function; hammer drilling function will provide greater impact force, saving more efforts for concrete and masonry drilling job. Depending on your tasks, suitable for installing chandelier, TV, furniture, wall, door, and window.
• 🔶VARIABLE SPEED TRIGGER & FORWARD AND REVERSE SWITCH - Variable speed knob help to accurately complete various applications; lock-on button reduces fatigue for long hours work; The forward/backward switch allows you to tighten or replace/remove the drill as needed
• 🔶 1/2'' KEYLESS CHUCK & DEPTH GAUGE - Equipped with the 1/2 inch keyless auto chuck, the hammer drill help you making the drilling work convenient and efficiency. The built-in depth gauge allows you to determine exactly how deep the bit should go to meet the individual requirements of the task.

Product features

TACKLIFE 7.5Amp 3000RPM Hammer Drill, 900W Powerful Motor, 1/2-Inch(13mm) Keyless Chuck, 360 ° Rotatable Handle and Depth Gauge

TACKLIFE PID05A professional hammer drill with 900W, 7.5Amp can realize fast and efficient operation. Hammer and drilling 2 modes in 1 for brick, wood, steel, masonry, etc. 2 variable-speed allows you use low-speed and high-speed drilling according to different work, from home to the construction site.

Ergonomic Design

Equipped with a keyless chuck for quick easy changes of drill bits. The maximum chuck diameter of this impact drill is 1/2''.

Note: It can't be used in reinforced concrete walls.

High Performance

The 7.5Amp hammer drill has a highest speed of 3000RMP, which provides high torque, helps you to make a straight hole easily and perfectly. It do a good job on completing heavy-duty projects on wood, masonry, solid steel and concrete

Technical Specifications

Material: Plastic & Metal

Idling speed: 0-3000RPM

Lining size:1/2 Inch

Input voltage: AC120V, 50 / 60Hz

Power consumption: 7.5Amp

Product description

Variable speed and reversing switch, metal gear housing for jobsite durability, Made of helical cut steel, heat treated gears, two finger trigger for increased comfort. Specs: 0-850 RPM no-load speed, 600 watts maximum output power, 360 degree side handle, Double gear Reduction. Includes: chuck key with holder.

Versatile and easy to handle, the DEWALT DW235G 1/2-Inch VSR Drill delivers the power you need for all your home-improvement projects. Enjoy the drill's variable-speed control, convenient reversing switch, comfortable pistol grip, and auxiliary handle, so you can work smarter.

1/2-Inch VSR Drill At a Glance: Powerful, 7.8 amp motor Reversible, variable-speed control from 0 to 850 rpm Pistol grip with two-finger trigger for comfort and control Versatile, 360-degree side handle for easy maneuvering Three-year limited warranty, one-year free service, 90-day money-back guarantee

The VSR Drill has a powerful 7.8 amp motor, making it ideal for a wide range of tasks. View larger.

Dense copper windings help generate powerful motor rotation. View larger.

Reliable Construction and Variable-Speed Control

With its powerful 7.8 amp motor, The DEWALT 1/2-Inch VSR Drill is capable of delivering speeds of 0 to 850 rpm. This translates to quick, versatile drilling and driving. At the heart of the DW235G's long-lasting performance is a set of heat-treated, helical-cut steel gears that provide extended tool life and exceptional durability.

Designed for Versatility and Durability

As versatile as it is powerful, the DW235G functions well for both steel and wood applications. When working with a spade bit in wood, the drill offers a 1-1/2-inch capacity, and with an auger bit in wood, it can handle a 1-1/8-inch bit. The drill can handle a 2-1/8-inch self-feed bit and a 3-1/2-inch hole saw in wood. It can also handle a 1/2-inch twist bit or a 2-inch hole saw in steel.

The DW235G's keyed 1/2-inch chuck grips the bit securely to prevent slippage, and metal gear housing provides added durability.

Built with Comfortable, Accurate Handling in Mind

Comfortable handling goes a long way toward ensuring accurate results. The DW235G is built with an ergonomic grip, and its two-finger rubber trigger makes power control easy. A 360-degree side handle gives you hand-position options for improved user comfort and better overall command of the drill. And it weighs an easy-to-manage 4.9 pounds, decreasing user fatigue after extended use.

The DWD235G 1/2-inch VSR Drill comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What's in the Box

DWD235G 1/2-Inch VSR Drill, 360-degree side handle, and chuck key with holder.

From the Manufacturer

DEWALT DW235G Heavy-Duty 7.8 Amp 1/2-Inch Drill

• Helical-cut steel, heat-treated steel gears for long life and durability
• Metal gear housing for jobsite durability and increased reliability
• Two-finger trigger for increased comfort
• 360-degree side handle for greater control and versatility
• Manufactured in the USA
• Helical-cut steel, heat-treated steel gears for long life and durability
• Metal gear housing for jobsite durability and increased reliability

User questions & answers

Question:	I am an older woman who uses a drill a few times a year for household projects and to remove screws. . Is this more drill than I need
Answer:	Yes, it is a very powerful drill. Depending on your use I would suggest a 12 volt portable drill such as a Rigid or similar. The difference is in the torque available from each type. The corded drill, even though it has a handle for better control if the bit jams could break fingers or a wrist. The battery drills are quite capable of doing most jobs around the house or farm.
Question:	Is it 220 voltage
Answer:	No, 110/120v
Question:	Is the pistol grip removable
Answer:	if you are referring to the straight item with the black handle (they call it a 360 degree side handle), then yes, it is removable. it provides an extra two-handed grip for drilling something substantial if you are referring to the yellow pistol grip, then no, it is part of the main housing and not detachable.
Question:	Does the 360 degree handle have notches that fit matching protrusions on the drill, so when you tighten the 360 degree handle drill will not spin
Answer:	Side Handle:WARNING: To reduce the risk of personal injury, ALWAYS operate the tool with the side handleproperly installed and tightened. Failure to do so may result in the side handle slipping during tooloperation and subsequent loss of control. Hold tool with both hands to maximize control.A side handle may be supplied with your drill. Side handles are included with these drills: DW235G,DW245, DW246. The side handle clamps to the front of the gear case and can be rotated 360degrees to permit right- or left-hand use.

Product description

Designed for high-performance job sites, the PORTER-CABLE PC600D 3/8-inch variable speed drill provides reliable power and durability for projects requiring extended tool usage. With a high-output, 6.0 amp motor capable of 0 to 2, 500 revolutions-per-minute (RPM), the PC600D 3/8-inch drill is designed to provide the speed needed for a variety of drilling applications. The high-torque gear design makes the drill ideal for metal and wood fabrication, pilot hole drilling in deck building or frame construction, and other applications requiring the extended run-time of a corded drill.

From the Manufacturer

Variable speed drill is powered by 6.0-Amp motor, which delivers power in demanding applications. Keyless 3/8" chuck allows fast and easy bit changes and its variable-speed trigger provides 0-2500 RPM, providing results in various drilling and driving uses.

• 6.5-Amp motor delivers power in demanding applications
• Keyless 3/8-inch chuck provides fast and easy bit changes
• 0-2500 RPM variable speed trigger provides the best results for drilling and driving
• Lock-on button provides easier control during prolonged use

User questions & answers

Question:	Does the lock on button hold at variable speeds or only at full speed? Thanks for your time
Answer:	I’m not sure about the torque rating but I can tell you I put down a 12 x 12 deck with 3/1/2” Screws with no problem
Question:	Which one do i buy - this one or skil 6335-01 7 amp 1/2-inch drill (provided both have the same price
Answer:	Hi PPaine! This drill features a 1/2 inch keyed chuck. Thanks for your question!
Question:	Can it drill in reverse
Answer:	Thank you for the question! When you release the trigger the drill may continue to rotate momentarily as it comes to a stop.
Question:	would this drill have enough power to drill through glass with the correct bit of course
Answer:	Hi Nit! This variable speed drill offers up to 950 rpm. Thanks for the excellent question!

Product features

PORTER-CABLE Corded Drill

What makes the Drill stand out and gives it the power that it runs on is the high performing Motor that delivers 283 Units Watt out. To sustain the performance every machine needs a power -packed battery and in this case, the drill has within a 20V MAX Lithium ion batteries with 1.3 amp/hour cells.

Fast Bit change feature

The drill has a ½” chuck on it that is keyless which means it will save the additional effort of changing the bit with the help of a key.

Easy to work with in confined spaces

The PORTER-CABLE PCC601LB Lithium Ion Drill is small in size and light weight that is 8.25” long and 3.5lbs respectively. Adding to the ease of usage, the drill has an LED light to help use it in dark spaces.

Product description

The Dewalt DW511R (Certified Refurbished) 1/2" 1/2" VSR Single Speed Hammerdrill has a powerful motor to drive high-speed drilling in dual modes at the user's desired speed. Constructed with a lightweight design for easy handling and operating.

• 8.5 amp motor provides high performance and overload protection
• Lightweight design (4.3 lbs.) for extended use and less user fatigue
• 360-degree side handle with depth rod offers greater control, versatility, and increased depth accuracy
• Dual mode: hammerdrill/drill for wood, steel, or masonry applications
• Two-finger trigger for increased comfort

User questions & answers

Question:	Hello how meny voltage does it work ?walt dw511r 1/2in (13mm) 7.8 amp vsr hammerdrill (renewed) https://www.amazon.com/dp/b079v1m2rx/ref=cm_sw_r_cp_a
Answer:	Works on standard 110/115 volts (USA).
Question:	does it come with original accessories
Answer:	Not sure what you mean by "original accessories". The drill comes as you see it. The drill, the handle. Works great as an occassional use drill. Would not recommend as a construction site tool.
Question:	Made in usa
Answer:	Made in USA. YES
Question:	Made in the USA
Answer:	The tag on the unit says "YES"