12 best dewalt hammer drill

Product description

DEWALT DCD996B 20V MAX* XR Lithium Ion Brushless 3-Speed Hammer drill - Bare tool features a DEWALT-built high power, high efficiency brushless motor that delivers up to 57% more run time over brushed. This hammer drill has a heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. The 3-Mode LED light provides illumination in dark or confined spaces up to 20X brighter than previous model, with an LED Spotlight mode with a 20 minute shutoff function allowing for extended work time in dark or confined spaces. A 3-speed, all-metal high performance transmission optimizes tool-to-task for fast application speeds and improved run-time, with 0-38,250 BPM for fast drilling in masonry materials. Includes: DCD996 - 20V MAX* XR Lithium Ion Brushless Premium 3-Speed Hammer drill, Belt Hook, 360° side handle. This is a bare tool item - battery sold separately.

• High performance transmission for fast application speeds and improved run time
• High efficiency brushless motor delivers up to 57 percent more run time over brushed
• 0 38,250 BPM for fast drilling in masonry materials
• 3 Mode LED light with Spotlight mode
• Battery sold separately
• Battery & Charger Sold Separately
• Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18

User questions & answers

Question:	Does this seller have a link for a single 5ah battery?, all I could find is 2pcs battery
Answer:	Battery model DCB205 is available for purchase as a single pack online or by calling 1-888-678-7278.
Question:	Will it do hammer only? Chipping
Answer:	I own this drill and it will drill and hammer drill only. When hammer drill setting is selected it rotates and hammers. Theres no way to have it hammer with out rotation. I mostly use this drill for large wood holes 3/4 -1in or with holes saws in wood. This drill has so much power that I use it almost only in 3rd high gear. It's fun watching the unsuspecting coworker put it in low and watch them go for a ride .lol
Question:	Does it have a 220 V charger? if not, can you provide with one 220v instead of 110v
Answer:	it comes with a 110v charger. I bought this: FLAGPOWER Li-Ion Battery Charger 12V MAX and 20V MAX for Dewalt DCB101, for $29 and it works great
Question:	Maybe a dumb question, but is there a different between a hammer drill and a drill with a hammer setting? Is this too powerful to use regularly
Answer:	There are no dumb questions except those not asked. If the word hammer is used in the description then you are dealing with a hammer drill. The hammer setting is designed for use with a masonry drill bit for use when drilling into concrete or bricks and is not beneficial when using a regular drill bit and drilling into regular surfaces. It is not a matter of being "too powerful" but a matter of being unnecessarily pounding on a surface where there is no need or benefit to pound. The hammer setting does not get used unless drilling with a masonry bit.

Product features

DCD996B BARE TOOL 20V MAX XR LITHIUM ION BRUSHLESS 3-SPEED HAMMER DRILL

At just 8.4 ins long and 4.7 lbs, DEWALT's Premium 3-Speed Hammer drill (DCD996) features up to 2.8x faster application speed at 0-38, 250 BPM and 2,250 RPM, is up to 82% more powerful, and provides up to 2.8X more run time.

Powerful

The 20V MAX XR Hammer drill(DCD996) features a powerful brushless motor that supplies 820 Units Watts Out (UWO) for a faster application speed.

Durable

Featuring durable nitro-carburized metal ratcheting chucks and comfortable handle grips, these tools are GUARANTEED TOUGH for durability on the jobsite and include coated and sealed switches that help to resist moisture and dust contamination

Product description

The DEWALT DCH273B 20v Max Brushless SDS Rotary Hammer Bare tool features a DEWALT brushless motor for extended runtime and durability. It also offers Active Vibration Control which significantly reduces vibration and increases user comfort and productivity; a Perform and Protect feature from DEWALT. This rotary hammer gives 2.1 Joules impact energy which provides corded power without the cord. It also has a retractable utility hook for convenient hanging and storage. This is a bare tool item - battery sold separately. Includes: 360 Degree Side Handle, Depth Rod, Retractable Utility Hook.

• Brushless motor for extended runtime and durability
• Active Vibration Control which significantly reduces vibration
• 2.1 Joules impact energy which provides corded power without the cord
• Retractable utility hook for convenient hanging and storage
• No Load Speed 0 - 1,100 rpm. Optimal Concrete Drilling-5/32 - 1/2 inch. Chuck Type-SDS+. Blows/Min- 0 - 4,600 bpm
• Battery & Charger Sold Separately

User questions & answers

Question:	What is the largest size bit it will take
Answer:	The largest sds bit I have been able to find is 1 3/8 (trade size 1 inch emt hole) however in doing some digging product specifications specify 5/8 inch max bit still size
Question:	Has anyone used this with core bits
Answer:	yes - used it for several 1 3/8 holes with coring bits
Question:	How well does it work with ground rod driver
Answer:	I would say very well. Used a Bosh bit. 8 foot rod going into wonderful Mizzou red clay. Took about 2 minutes. I did add a little dish soap and water out of habit.
Question:	Can u send it to New Zealand
Answer:	No. We need it for work.

Product features

DEWALT DCH273B 20V Max* XR Brushless 1” L-Shape SDS Plus Rotary Hammer

Product Description

The DCH273B 20V Max XR Brushless 1” Rotary Hammer is a high-performance drill that is powered by a DEWALT brushless motor and a durable German engineered mechanism that delivers 2.1 joules of impact energy. Coupled with it's light weight design and SHOCKS Active Vibration Control technology, this hammer is ideal when used in overhead applications. The DCH273B is Dust Extraction ready for the D25303DH

Product description

DEWALT DCD996P2 20V MAX* XR Lithium Ion Brushless 3-Speed Hammer drill Kit features a DEWALT-built high power, high efficiency brushless motor that delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. This hammer drill has a heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. The 3-Mode LED light provides illumination in dark or confined spaces up to 20X brighter than previous model, with an LED Spotlight mode with a 20 minute shutoff function allowing for extended work time in dark or confined spaces. A 3-speed, all-metal high performance transmission optimizes tool-to-task for fast application speeds and improved run-time, with 0-38,250 BPM for fast drilling in masonry materials. Includes: DCD996 - 20V MAX* XR Lithium Ion Brushless Premium 3-Speed Hammer drill, DCB205 - 20V MAX* XR High Capacity Li-Ion Batteries (5.0Ah), Charger, Belt Hook, 360° side handle and Kit box. Do not change gears when the tool is running. Always allow the drill to come to a complete stop before changing gears. If you have trouble changing gears, depress and release the trigger switch and try again

• High performance transmission for fast application speeds and improved run-time
• High efficiency brushless motor delivers up to 57% more run time over brushed
• 0-38,250 BPM for fast drilling in masonry materials
• 3-Mode LED light with Spotlight mode
• DCB205 - 20V MAX* XR High Capacity Li-Ion Batteries (5.0Ah)
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	can it just drill without hammering
Answer:	Yes, if: 1. SDS style metal drilling bits are used, or 2. An adaptor is used to convert the SDS chuck to the conventional 3 jaw chuck.
Question:	Should the battery be loose on the grip? It rattles it's so loose
Answer:	Tiene la función de martillo, taladro normal, y taladro con martillo combinado. Usa las barrenas hittin, creo que asi se escribe.
Question:	Is there a way to remove the chuck
Answer:	3 years
Question:	I want to use this in europe and i would need a compatible 220v charger? is there something from the producer itself? how can i use this with 220v
Answer:	Case for the rotary hammer drill. No case for the angle grinder.

Product features

DCD996P2 20V MAX XR LITHIUM ION BRUSHLESS 3-SPEED HAMMER DRILL KIT

At just 8.4 ins long and 4.7 lbs, DEWALT's Premium 3-Speed Hammer drill (DCD996) features up to 2.8x faster application speed at 0-38, 250 BPM and 2,250 RPM, is up to 82% more powerful, and provides up to 2.8X more run time.

Powerful

The 20V MAX XR Hammer drill(DCD996) features a powerful brushless motor that supplies 820 Units Watts Out (UWO) for a faster application speed.

Durable

Featuring durable nitro-carburized metal ratcheting chucks and comfortable handle grips, these tools are GUARANTEED TOUGH for durability on the jobsite and include coated and sealed switches that help to resist moisture and dust contamination

• 🎁【❤ The Best Gift 2020】🎁
• ▲【 POWERFUL 6AMP MOTOR】710W 6Amp Powerful motor drives the hammer drill to a high speed of 2800RPM; Come with rich accessories, ideal for installing chandelier, procesandoing furniture, wall, door, and other DIY job for the metal, glass, stone and wood, which means that most of your needs can be met
• ▲【 HAMMER & DRILL 2 FUNCTIONS IN 1】With a dual-mode selector, just switch it to easily convert drill and hammer drill function, hammer drill function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts; The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic
• ▲【 VARIABLE SPEED TRIGGER & FORWARD AND REVERSE SWITCH】Comes with a variable speed trigger(0-2800 RPM), this hammer drill allows you to set any speed of your choice, which responds to the amount of pressure you apply, offers a greater degree of speed control. Forward and reverse function can be easily switch according to your tasks, such as complete the job of tightening or loosening screws
• ▲【 360° ROTATING AUXILIARY HANDLE & METAL KEYED CHUCK】With the adjustable anti-skid auxiliary design, the rotating auxiliary handle adds flexibility and offers a better grip, convenient for operation at any angle. The metal chuck achieves more precise control, it's keyed design is much safer than normal chucks where the drill bit can slip in some cases, and it is suitable for drill bits with diameter (≤1/2 inch) to meet your various requirements
• ▲【 10 DRILL BITS SET】10Pcs different sizes, different materials drill bits make this electric drill set an ideal tool for different kinds of applications and you can choose one for yourself accordingly, such as drilling into wood, metal, plastic, masonry and concrete

Product features

TACKLIFE 1/2-Inch(13mm) 6AMP/2800RPM Corded Dual Hammer Drill for Dry Wall, Wood, Stone, Steel with 10Pcs Drill Bits, Depth Gauge, Handle - PID01A

TACKLIFE 1/2-inch hammer drill features a pure copper motor of 6Amp, offering strong power to the drilling work, rotating speed can be up to 2800RMP, 12 dials variable speed knob and trigger allow you to choose the exact speed for different tasks. With a metal chuck, it is easy to change drill bits within a diameter of 1/2 inch(13 mm). The compact body, weighs only 5.5lbs, makes it an ideal drill for different working scenes.

Hammer & Drill 2 Functions in 1

• Before starting drilling, choose the hammer or drill function by switching the button on the top of the machine.
• The Hammer function introduces a pulsating action that helps drive masonry bits through hard surfaces, provides greater impact force and saves more efforts.
• The Drill mode has a more controlled torque and is intended for drilling holes through softer surfaces, such as wood or plastic.

PLEASE NOTE:

This hammer drill can't be used in reinforced concrete walls.

Variable-speed Trigger and Knob & Forward and Reverse Button

• The speed knob with 12-levels speed dial, which allows you to set a maximum speed before drilling.
• The variable-speed trigger allows you to change the speed for different applications.
• The lock-on button keeps one speed permanently to free your finger for long hours working.
• Forward & Reverse switch provides more convenience to tighten and loosen screws.
• The metal chuck achieves more precise control, it's keyed design provides greater grip of the drill bit and prevents the drill bit from falling off during work

Practical 10 Drill Bits Set

5 Twist drill bits for steel plate and wool(mm) : 4/5/6/7/8

5 Drills bits for brick(mm) : 4/5/6/7/8

Scaled Depth Gauge

The detachable depth rod allows you to determine exactly how deep the bit should go to meet the individual requirements of the task.

Rotatable Side Handle

360° rotatable side handle enables you to choose the best grip for your drilling work. Without any tools, the handle can be quickly installed and removed.

Product description

The D25263K 1-1/8-inch D-Handle SDS Rotary Hammer with SHOCKS offers 3 Joules of impact energy for fast drilling and chipping speed. It has a 8.5 Amp high performance motor for all your needs, and also features SHOCKS active vibration control and regulation, resulting in reduced vibration felt in the handles - a Perform & Protect feature. This Rotary Hammer has a rotating brush ring which delivers full speed/torque in forward and reverse, along with an integral clutch that reduces sudden, high torque reactions if bit jams. Includes: Rotary Hammer, 360 Side Handle, Depth Rod, Kit Box.

• 3 Joules of impact energy
• 8.5 Amp high performance motor
• SHOCKS - Active Vibration Control, reduced vibration felt in the handles. A Perform & Protect feature
• Integral clutch reduces sudden, high torque reactions
• Rotating brush ring delivers full speed/torque in forward and reverse

User questions & answers

Question:	No torque rating? Does anyone know the torque rating or max hole saw size in wood and steel
Answer:	I don't know that I would use it for wood, though I guess you could. It can be set to drill, to jack hammer, or to drill and jackhammer combined. Also, don't know about torque, but I found it to be sufficient for all applications I've tried it in. It is surprisingly powerful and durable for a snall handheld unit.
Question:	Does this have a 3rd setting to drill w/o hammer option so can core drill
Answer:	It has 3 options: 1: drill without hammer, only spining, 2: drill with hammer, 3: hammer only for chisel. No spinning...
Question:	Does this unit have the option of variable positions for chisel bit
Answer:	Yes, it can lock in position either horizontally or vertically, as I have used it in both positions. It may lock in other angles, but I have not tried it in angles other than parallel or perpendicular to the handle. I also will mention that this unit has performed admirably and I have absolutely no regrets with my purchase. I was able to remove old tile (put down in the 1950's with thick-set. I found it works best at lower speeds and sharp angles of attack. Take your time and you won't work up any sweat, letting the tool do the work. Hope this helps.
Question:	How do you place the drill bit in the hammer drill, I have been working on this task for a few hours,it do not grip the bits at all
Answer:	This drill does require the special SDS carbide drill bits that have three slots in the shank. I pull the nose piece back and press a little on the bit and it will slip into the drill. I then rotate the bit to ensure that it is locked into place. The slots in the SDS drill bits allows then to transfer the drills hammer action to the drill point. With this drill only bits that are marked SDS Plus will work.

Product description

Our 20V max cordless compact hammer drill/driver is designed with a high performance Brushless motor that delivers longer motor life and up to 57% more runtime over brushed motors. An included LED light provides optimum illumination in dark spaces as you work.

• Brushless motor delivers up to 57% more runtime over brushed
• Ergonomic comfort grip handle provides ideal balance and tool control
• Compact and has a lightweight design to fit into tight areas
• Led light with 20-second trigger release delay to provide increased visibility in dark or confined spaces
• 1 3.0Ah battery is 18% lighter than its predecessor (DCB200) and has a 3-year free service warranty

User questions & answers

Question:	Does the clutch have a separate hammer setting or is it always in hammer mode
Answer:	After speaking with the vendor, They confirmed that you can adjust nails anywhere between 5/8 - 2 in. What you would do is dial the knob that's on the right side of the tool.
Question:	The product details says no battery included. is it correct? is battery and charger included? how many batteries
Answer:	No it does not come with a case
Question:	What is length front to back
Answer:	This is not adequate for siding. Use the correct size nail per the MFG installation instructions.
Question:	How long does it take to recharge the battery
Answer:	Yes it comes with a ZRP102 and ZRP118 Charger

Product description

The DEWALT DCH133B 20V Max XR Brushless 1” D-Handle Rotary Hammer Drill Baretool features an optimized 2.6J mechanism which provides faster than corded speed of application. The durable German-engineered mechanism allows for long service life, even in the hardest concrete. DEWALT electronics allow the tool to maintain speed through the entire application without bogging down even with the largest bits. This hammer drill's compact size allows access to space restricted areas. This tool provides optimal concrete drilling in 3/16-5/8 inch concrete. It offers a no load speed of 0-1,500 rpm, with Blows/Minute at 0-5,550 bpm. Additional specs: Chuck Type SDS+, Mechanical Clutch, VSR Switch, Impact Energy = 2.6 Joules. **This is a baretool item, battery sold separately. Includes: 20v Max Rotary Hammer Drill.

• Optimized 2.6J mechanism provides faster than corded Speed of Application
• DEWALT electronics allow the tool to maintain speed through the entire application without bogging down even with the largest bits
• Compact size allows access to space restricted areas
• Compact size allows access to space restricted areas
• Battery & Charger Sold Separately

User questions & answers

Question:	Trabaja con corriente de 110 o de
Answer:	Esta herramienta trabaja con una batería recargable de 20V, preferiblemente mayor a 5Ah, es decir, no trabaja conectado a un toma corriente. Creo que la herramienta similar con cable trabaja a 110V
Question:	does this drill, hammer and chip, or just drill and hammer
Answer:	It has three settings...drill, hammer drill, and hammer/chip.
Question:	What do i need to use sds max tile chisel bits
Answer:	This tool is SDS+, unless you can find a SDS+ to SDS Max adapter you probably need a different tool
Question:	Is it normal for chuck to wobble slightly even when in drill mode with no bit inserted
Answer:	I noticed some runout on my brand new DCH133 also, it was approximately 0.06". I notified Dewalt to see what they have to say just now. Runout will make the holes bigger than intended for example if I am drilling a 0.25" hole, my runout will turn it into a 0.31" hole. This is a problem if the fastener tolerances dont allow for the larger diameter...

Product description

Take advantage of more power with the 20V MAX brushless tools with DEWALT FLEXVOLT ADVANTAGE tool technology. This 1/2 in. Cordless Hammer Drill has up to 42% more power when paired with a DCB606 FLEXVOLT Battery vs. a DCB205 20V MAX 5.0Ah Battery. Battery and charger sold separately.

• Up to 42% more power when paired with FLEXVOLT batteries
• Compatible with all DEWALT 20V MAX and FLEXVOLT Batteries
• GREAT BIT GRIP: Heavy-duty 1/2 in. ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
• 20X BRIGHTER LED: 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985
• EXTENDED WORK TIME WITH LED: Spotlight mode features 20-minute shutoff function, allowing for extended work time in dark or confined spaces

User questions & answers

Question:	How many Nm of torque does Dewalt dcd 999 have
Answer:	The previous model, DCD996, was rated at 95 Nm (hard) and 66 Nm (soft) for torque. This model is said to be 42% more powerful. That would equate to around 135 Nm (hard) and 94 Nm (soft).
Question:	What is flexvolt advantage
Answer:	FLEXVOLT ADVANTAGE delivers more power than with standard 20V DEWALT batteries. Examples : DCS573B Circular saw would have up to 77% more power, DCG416B Angle grinder would have up to 54% more power. Also FLEXVOLT are 60V so it will have a longer runtime.
Question:	Does the old type 1 6ah flexvolt battery give it more power or just the new batteries
Answer:	The "old type 1" 6Ah DCB606 with the gray top is the exact same internally as the new yellow top DCB606, they just refreshed its case a bit to match the other FlexVolt batteries. Function exactly the same.
Question:	can this tool be used to remove tile
Answer:	No

Product description

This Brushless compact cordless hammer drill/driver kit includes two 20V max* Lithium Ion batteries, charger, and carrying bag. It is only 6.9 in. Front to back, and its high-performance Brushless motor delivers 340 unit watts outs (UWO). the hammer functionality enables users to complete masonry drilling applications. The LED provides optimum illumination in dark spaces. The handle is ergonomically designed for increased comfort, balance, and easier tool control. It also has a removable belt hook. It’s backed by a 3-year, limited warranty so you can buy with confidence.

• Hammer functionality enables users to complete masonry drilling applications.
• Compact at only 6.9 in. Front to back designed to fit in tight spaces
• Lightweight at only 2.5 lbs.
• Variable speed trigger allows for control and precision on delicate work surfaces
• DEWALT built Brushless motor for efficient performance and runtime
• 1/2 in. Ratcheting chuck provides superior bit gripping strength
• Led foot light for superior visibility
• 340 UWO of power to help get the job done

User questions & answers

Question:	Is this good drill to buy
Answer:	Yes, my husband used it today and is very happy with his hammer drill.
Question:	What is the AH on each of the two batteries
Answer:	The DCD709C2 will include (2) DCB201 (1.5 AH) batteries.
Question:	Can the charger be connected to a 240 volts outlet
Answer:	The charger is rated for use with 110V / 120V current.
Question:	Does this have a switch that makes it a regular drill and then a hammer drill
Answer:	There is a model selection for drilling and screw driving.

Product description

The DCK299M2 20V MAX* combo kit is ideal for most drilling, hammering and fastening applications. This DEWALT tool kit includes a DCF887 impact driver and DCD996 hammer drill. DEWALT cordless tools also come with two 4.0 Ah battery packs and charger.

• DCD996 20V MAX* 1/2-inch hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time for the cordless drill combo kit
• DCD996 20V MAX* 1/2-inch hammerdrill in the cordless tools combo kit gets 0-38,250 BPM for fast drilling in masonry materials
• DCD996 20V MAX* 1/2-inch hammerdrill in the drill/ impact driver combo kit has a compact size (8.4-inch front-to-back length) and lightweight (4.7 lb) design to fit tight areas
• DCD996 20V MAX* hammerdrill includes 3-mode LED providing lighting in dark or confined spaces up to 20 times brighter than previous model
• DCF887 20V MAX* 1/4-inch impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute
• DCF887 20V MAX* 1/4-inch impact driver has a compact size (5.3-inch front-to-back length) and lightweight (3.4 lbs) design

User questions & answers

Question:	where is the led light on the drill
Answer:	Yes you can drill without the hammer function . In the front of the drill Is the clutch Setting , Along with the clutch setting If you look closely you can see The setting for just Drilling , After that hammer Drilling
Question:	Is the “hammerdrill” an option or is it always in hammer mode
Answer:	I have 5 drills and 12 batterys, they all are lose. I suspect this becase they operate under the bits and are covered with all material drilled; it had yo be lose enough to fall free with out binding the battery. They all work great. Batt life is most affected by leaving on the charger, remove once charged.
Question:	Why is the p2 kit $90 more than the m2? the retail price difference between 4.0 ah and 5.0 ah battery 2 packs is only
Answer:	I would think that if you open the chuck all the way and look in the bottom of the chuck there should be a bolt holding it in. At least on most drills that's how they are held in.
Question:	Does anyone else have an issue with the drill in the dck299p2? one guy said bought three and they were all defective
Answer:	I bought this tool for use in Hong Kong with 240v. I bought the DCB118 fast charger from the UK along with a FlexVolt battery (DCB606) and they work perfectly with the DCD996B (and my DCF887B). It is worth noting that shipping of Li-ion batteries is now restricted internationally based on a number of factors including watt-hours and if the battery is being shipped on it's own or with equipment. I had to return a combo kit as my US trans-shipper would not ship Li-ion batteries with equipment and gave me no option to split the package and ship the batteries separately (conversely, they shipped the larger FlexVolt battery (54V) with charger from the UK without issue).Compatible chargers include DCB102, DCB118, DCB132, and DCB1800B.If you are going to buy the DCD996 (or other 20V MAX tool), then in my experience, just buy the bare tool and then source the battery and charger locally.

Product description

The DEWALT DCD985 20V Max lithium ion premium 3-speed hammer drill/driver has a patented 3-speed all-metal transmission that matches the tool to task for the fastest application speed and improved run time. The heavy-duty 1/2-inch metal ratcheting chuck provides superior bit gripping strength. It has a high power.

• High efficiency motor delivers 450 unit watts out of max power for superior performance
• Also has a LED light with 20 second delay after trigger release Batteries not included
• Uses DEWALT 20Volt Max lithium ion batteries which offer longer run time and enhanced durability
• Heavy duty 1/2 Inch metal ratcheting chuck with carbide inserts
• Kit includes drill and 360 degree side handle 3 speed all metal transmission
• Battery & Charger Sold Separately
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	is this drill brushed or brushless
Answer:	Yes. Press a button and you change the direction from forward to reverse.
Question:	Does this drill come with a case
Answer:	should
Question:	Can i drill hole on metal
Answer:	Yes. The P215 does NOT turn as you tighten the chuck. Check one out at Home Depot if you don't believe me
Question:
Answer:	Sorry, I don't know. Mine is an old Yankee Drill, and they work exactly as needed. I mistakenly bought another brand of "push drill" a few years ago and was very disappointed, because it did not convert the "push and pull" to adequate torque. My only recommendation can be, "Go to a Yankee Drill" and "Yankee Drill" bits will work.

Product features

DEWALT DCD985B 20-Volt MAX Lithium Ion 1/2-Inch Hammer Drill/Drill Driver

DEWALT’s DCD985B 20-volt max lithium-ion 3.0 Ah premium hammer drill/driver bare tool comes equipped with patented technology and innovative features that make it ideal for commercial and residential builders, remodelers, carpenters, woodworkers, electricians, and plumbers. Its extreme durability, performance, and comfort allow users to match the tool to the task at hand, increasing its flexibility for a variety of applications regardless of speed, torque, or power.

What''s in the Box

Power

DEWALT-designed electronics have been built into the DCD985B’s switch to provide maximum life for the tools and batteries by helping to protect them from overheating, overloading, and deep discharge during use. The 20-volt’s lithium-ion batteries provide up to 35 percent more runtime than existing 18-volt lithium-ion battery technology. Plus, the hammer drill’s high-power, high-efficiency motor delivers 535 unit watts out of maximum power for superior performance in all drilling and fastening applications.

Speed

The hammer drill’s patented three-speed (0-600 RPM; 0-1,250 RPM; and 0-2,000 RPM), all-metal transmission allows users to select the appropriate speed for the job at hand and provides a significant advantage for applications that cannot be done at high speed because of torque requirements. While other drills may have to be set to the slowest speed, the DEWALT 20-volt max lithium-ion premium 3.0 Ah hammer drill has a middle speed setting that is more than twice as fast for tasks like drilling larger ship auger bits.

Durability

A heavy-duty 1/2-inch metal ratcheting chuck with carbide inserts provides superior bit-gripping strength—reducing slippage during high-torque applications—thus providing longer tool life. And the all-metal gear housing meets the demand for extreme toughness.

Convenience

The bright built-in LED work light above the trigger has a 20-second delay that improves visibility in dimly lit spaces.

Comfort

The premium hammer drill’s design incorporates a slim handle that extends user comfort during long jobs, and DEWALT’s engineering and design team adjusted the product footprint and weight allocation for ideal balance and a lightweight feel.

Made in the USA

In a commitment to build America, DEWALT, a leading manufacturer of high-quality professional power tools, is proud to expand its product offerings made in the USA using global materials to include more than 600 different cordless power tools, hand tools and accessories. DEWALT began production of its American-built cordless power tools in its 75,000-square-foot Charlotte Manufacturing Operations facility in early October of 2013, using global materials. Those same tools built prior to the opening of the factory were manufactured internationally and imported.

DEWALT cannot guarantee the tool you receive to be made in the USA, some retailers may have items that were built prior to October 2013. Only tools manufactured after October 2013 are made in the USA with global materials.

• DeWALT-built high power, high efficiency brushless motor delivers up to 57ore run time over brushed
• 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model

User questions & answers

Question:	Is this dewalt dcd996br drill equipped with sds
Answer:	Yes
Question:	Can this drill be used with the 20V Max 6 Ah batteries
Answer:	This nailer runs on Ryobi 18v one+ battery.
Question:	what is the warranty
Answer:	Not for Framing this is a finish nailer
Question:	Does this include front mounted handle
Answer:	Yes. There is a dial which works easily. I love this brad nailer!