11 best drill tables

Product description

Remember when you could support your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates an additional 275 square inches of space for your projects. Onboard rulers maximize accuracy for precise and even cuts while the adjustable fence slides back and forth to fit the needs of any project. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation while the fence’s stop block adjusts along the fence to help center your workpiece. The removable insert allows users to drill completely through their workpiece without damaging the table. Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (model 4208), the WEN 10-Inch Drill Press (models 4210 & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, it’s universal fit allows for installation on the majority of drill presses on the market. Simply tighten the mounting clamps onto tables anywhere from 5 to 16 inches in width. And, because its a WEN product, your drill press table comes backed by a friendly customer help line and a two-year warranty, all to make sure you remember WEN.

• Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)
• Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches
• Fits any drill press table between 5 and 16 inches in width
• Designed to fit the entire WEN Drill Press Series
• Includes an adjustable fence, a sliding fence stop block, onboard rulers, and a two-year warranty

User questions & answers

Question:	How does this drill fence mount to the wren drill press table
Answer:	It does, but there is a big "BUT". The table mounts to the drill press table via two clamps that attach to the bottom. Unfortunately, this clamping mechanism is not very stable. It easily comes loose. In my case, I purchase 4 screw fasteners, moved the attachment point to match the slots on the drill press table and then attached the table to the drill press table. Now it is rock solid. The fence is good quality, but with a 12 " drill press the mounting was problematic. Once I made the modifications, all is good!
Question:	Why are these q&as all about a drill press when the item advertised is a drill press table
Answer:	Many drill press manufactures make specific tables to fit their drill press pad. some have many different slots for different types of bolting fixtures for the drill press. Different fixtures are only compatible with specific drill press tables. It is important to see the bolting selections to match your drill press.
Question:	How far isback of table to center of hole on table
Answer:	The rear edge of the table is 4 inches from the center of the hole. With the fence in place, the hole center is 3 inches from the fence, if aligned at the edge of the table. The hole is also 12 inches from the table side edges.
Question:	Does this come with hold down clamps for the t-tracks? If not, what is recommended? thx
Answer:	I did not get hold downs but they are available.

Product features

WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

Remember when you could support your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates an additional 275 square inches of space for your projects. Onboard rulers maximize accuracy for precise and even cuts while the adjustable fence slides back and forth to fit the needs of any project. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation while the fence's stop block adjusts along the fence to help center your workpiece. The removable insert allows users to drill completely through their workpiece without damaging the table.

Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (model 4208), the WEN 10-Inch Drill Press (models 4210 & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227).

Although this drill press was designed with WEN in mind, it's universal fit allows for installation on the majority of drill presses on the market. Simply tighten the mounting clamps onto tables anywhere from 5 to 16 inches in width.

Features

- Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)

- Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches

- Fits the majority of drill press tables between 5 and 16 inches in width

- Designed to fit the entire WEN Drill Press Series

• Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
• The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
• Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter. That feature alone separates the Fulton Drill Press Table from the others
• Below the zero clearance insert is an opening that measures approximately 5-5/16” x 5-5/16” at the top with a circle cut out of the center that is about 3-3/4” in diameter. The circular cut-out is approximately 1” deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3” in diameter.
• That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.

User questions & answers

Question:	Does this table come with measuring tape/ruler
Answer:	Mine did not come with a measuring tape.
Question:	Can the fence be removed
Answer:	Yes. It is secured to the table by 2 T Track clamps (left & right) when these are loosened, the fence can be moved forward or backward. If you slide it to the rear, beyond the tracks, it can be removed.
Question:	How high is the Aluminum L Fence
Answer:	the aluminum fence on our unit wasn't square (n0t 90 degrees) so we tossed it. If yours is square I recall it to be between 1 1/2" and 2 inches
Question:	What size drill bit do you use to drill the holes for the screws that hold the T track on since it doesn't come pre assembled
Answer:	I used a 1/16th inch bit. Don't over tighten the screw.

• Feed Type: X Axis/ Table Feed
• Peak Torque Per Pound (in): 135
• Feed Rate Per Minute (in): 0-25
• Power: 110V
• Mounting Shaft Diameter: 5/8"

User questions & answers

Question:	Will this fit a jet jdm
Answer:	Vg is very satisfying
Question:	will this fit a Harbor Freight Mill Drill
Answer:	I use glycerin to make my liquid soap. If you are making liquid soap I would definitely use the vegetable glycerin and it works very well! The vegetable glycerin helps thicken the liquid soap and you can also use it to make foam soap. Hope this helps! Good luck
Question:	Will it fit an rf-30 mill drill
Answer:	500ml.

Product features

Mill Drill Table Power Feed For JET Machine

• Easy to install, no modification needed
• Insert type connectors replacement, clutch gear assembly has torque limit
• When power feed is working and accepting a tremendous obstacle, the clutch gear assembly will automatically disengage the power feed in order to reduce damage
• Speed range is 0-165RPM, rapid speed is 240 RPM.
• 135in/ Lbs, Voltage: 110v

Product description

replacement yellow safety keys for Sears Craftsman table saw, sander, band saw, drill press, etc. Compatible with all Sears bench and stationary power tools with round safety keys, substituting for Sears part numbers 60256, 24035, 22255, 976863-001, and similar.

• This key is an OEM injection molded part. It is not a 3D printed copy.
• This Safety Key fits many Sears Craftsman Rocker Style, Power Switchs used on many models of Craftsman power tools.
• Key head is and approximate 7/8" in diameter but is slightly oval shaped. The longest leg is about 15/16" and the short leg is about 5/8" long.
• Sears sold this key under several part numbers including 22255, 60256, and 976863-001.
• The last picture shows the key installed in a typical switch. This listing is for the KEY ONLY

User questions & answers

Question:	Is there any difference between the switch key and the original one? Is it really the same quality
Answer:	I use this product for my soap making. I did a little research check out the link below. I think this vegetable glycerin may work for you. Hope this helps. Good luck! http://www.gloucesterwomanbaskets.com/2014/02/my-inspiration-for-learning-pine-needle.html?m=1

Product description

WoodRiver Drill Press Table features a large 15-1/2”-deep x 23-3/8”-wide x 1"-thick tabletop constructed of a MDF core covered with matte black laminate. Tear-out is all but eliminated when drilling into the 4- 9/16"-square replaceable insert. Back-to-Back T-Track is bolted to the tabletop rather than screwed, so that accessories can apply more pressure to hold objects when drilling. Unique 24"-long Double T-Track extrusion is used for the simple fence that anchors to Back-to-Back Track. Self-adhesive scales are applied to the pair of Back-to-Back T-Tracks, as well as the Double T-Track fence. Two Saddle Stops anchor to the simple fence for multiple repetitive drilling locations. Complete Drill Press Table includes all T-Tracks, two Saddle Stops and mounting washers. Fits most 14" and larger drill presses. About Us: Founded in Boston in 1928, Woodcraft's operations were moved to Parkersburg, West Virginia in 1989. It's been over 90 years since Woodcraft first began selling high quality woodworking tools and supplies out of a one room shop in Boston's North End, and Woodcraft is still firmly committed to providing woodworkers with superior products and expert advice. We are America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans

• 15-1/2" x 23-3/8" x 1" tabletop with replaceable insert
• 24" double T-Track simple fence with measurement scales
• Two Back-To-Back T-Tracks anchor fence and include scales
• Two Saddle Stops conveniently flip out of the way when not in use - Fits most 14" and larger drill presses
• WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans.

User questions & answers

Question:	Will this woodriver drill press table fit my jet jdp-15b 15 "drill press
Answer:	It would not work with that style mill drill. Designed for Jet and Rong Fu full size mill drills
Question:	Will this woodriver drill press table fit my jet jdp-15b drill press
Answer:	This power feed uses a 3 jaw coupler to attach to the lead screw. The smaller mill drills generally use a coupler with a set screw for the lead screw
Question:	My drill press measures 7.5 inches between the center of the spindle and the inner edge of the support column. Will this table work for me
Answer:	I have not purchased replacement blades yet.
Question:	Will this work with a central machinery floor drill press
Answer:	If it calls for glycerin i would guess yes. i got it to make liquid soap as a thickener.

• The Fulton Deluxe Drill Press Table with Adjustable Aluminum Fence is the perfect addition for most any drill press. If you have a large floor drill press or a smaller bench top, odds are this add-on table top will quickly and easily mount to it. This feature rich drill press table allows you to drill accurate, repetitive holes, sand projects using the zero clearance plate, drill straight holes with an adjustable fence all the while it reduces vibration since it is a full 1 3/8” thick.
• This Table features a uniquely designed uni-body, L-style aluminum fence that is completely adjustable to achieve squareness to your table top and drill bit. This not only makes drilling straight holes easier, it makes drilling taller, longer stock much more accurate. To adjust the fence, you simply rotate the pre-installed set screws inside the fence or the ones on the back side of the fence until you are square. We recommend using a machinist square to do this (square not included).
• The package also includes a flip stop for repetitive drilling. The flip stop can be completely removed from the fence or it can be positioned up and out of the way when not in use. The stop works in conjunction with the center finder tape on the fence. The reason for the center finder tape is so you can accurately measure distance starting from the drill bit and work your way out from center. This method of measuring on the drill press comes in very handy on many drill press applications.
• Two zero clearance insert plates are included with the table. The inserts are removable and replaceable. They are designed to accept multiple holes so that you can drill clean holes with little or no tear-out with different size drill bits. The inserts can also be used for drum sanding purposes. Simply drill a hole slightly larger than your drum sander diameter. You can then drop your drum sander below the surface of the table to edge sand your projects with ease!
• The table is a full 1 3/8” thick and is laminated on the top and bottom to keep moisture out. The extra thick table top serves a few important purposes. First, is that it helps absorb much of the vibration which provides you with a stable working surface. Second, it allows for a unique track mounting system that lets you move the table into most any position needed. Many after market tables don’t allow for this kind of adjustability.

Product features

Fulton Deluxe 1 3/8 inch Thick Drill Press Table with Precision Tilt Capable Adjustable Fence System

The most complete after market drill press table available. With all the accessories and features not available on other table tops, the Fulton Deluxe Drill Press Table is sure to expand your drill press machine capabilities the moment you mount it!

Whats in the box?

• 15" x 24" x 1-3/8" thick laminated drill press table
• Precision, tilt capable aluminum fence system with center finding scale
• Aluminum flip stop for repetitive and accurate hole drilling
• 2 each PVC tipped Aluminum Hold Downs for keeping your stock in place
• 2 each Zero Clearance Inserts to help reduce tear-out and to allow zero clearance for multiple size sanding drums
• 2 each Post Knobs and Mounting Hardware for mounting the table to drill press machines with slotted factory tables

High Quality Parts for High Quality Projects and High Quality Results

No matter the size and scope of your projects the Fulton Deluxe Drill Press Table will be the perfect complement to your drill press to help drill precisely located, straight, true holes time after time after time. Wether using a standard drill bit, brad point bit or even large multi-tooth forstner bits, this table is the perfect table to help support your project and help get the job done.

Precision Aluminum Fence System

When we were designing this fence, we had a number of customers call in about other manufacturers drill press fences. One of the most pointed out flaws that there was no way to square the fence to the drill bit. The only way to do this with other fences was to shim the front or back until you got kind of sort of close. Now, with the Fulton Precision Aluminum Fence, you can actually tilt the fence back or front using set screws at both ends of the fence! This makes squaring up your fence way easier than ever before! The fence includes a center finding measuring tape to make locating center on your stock easy. The aluminum fence stop is the perfect way to drill holes at the same spot on multiple pieces of stock. When not in use the flip stop can be flipped up and out of the way or it can be completely removed by sliding it off the fence.

That's a THICK table top!

Why such a thick table top you ask? Well in this case, we believe that thicker is definitely better than thinner table tops. Our thicker table helps absorb the natural vibrations caused by drill presses and helps make the drilling process feel much smoother. Thinner tables tend to feel kind of well, thin in comparison after using the Fulton Table Top. Its a full 1-3/8" thick of laminated MDF that is sealed on the top and bottom to help prevent moisture and bowing of the table.

Slotted Factory Table? No Slots on your Factory Table? No Problem!

Unlike many other drill press tables, the Fulton Deluxe Drill Press Table can be mounted to virtually any drill press! With your unique track base mounting system, you can use standard post knobs to mount the table to slotted factory table tops or use aluminum hold downs to clamp the table to non-slotted factory table tops.

Prevent Tear-out and Edge Sand Projects with Ease!

The Fulton Deluxe Drill Press Table comes with two Zero Clearance Insert Plates. The reason we include a second plate is simply because many woodworkers like to drill multiple size holes into the plates for multiple size bits. Another reason is for one plate to be used for drilling while the other can be used for sanding. Simply drill holes that are slightly larger than your sanding drum diameter. This allows you to drop a sanding drum down below the surface of the drill press table to make edge sanding easy. The plates can be rotated after they are drilled for a fresh area for a new hole.

Mounts to Most Any Size Drill Press

The Fulton Deluxe 1 3/8 inch Thick Drill Press Table with Precision Tilt Capable Adjustable Fence System can be mounted to most any drill press from 10" or larger. The table will work on 10" drill presses. When mounted to a 10 inch drill press, the center of the opening on the Fulton Deluxe Drill Press Table will not line up on center with the drill press chuck as it does on larger drill press machines. This means that the largest diameter drill bit you can use without drilling into the Fulton Deluxe Drill Press Table is 1-5/8" in diameter on 10" drill press machines. Larger drill press machines will accept larger diameter drill bits.

• PACKAGE #3 INCLUDES - Table, 36 Inch Fence, 6 Stainless Steel Flip Stops, 2 Knuckle Clamps, 1 Filler Block. Designed for 12 inch and larger drill presses.
• MICRO-DOT TABLE - The 16x23 inch work surface is covered in a unique Micro-Dot laminate on both sides of the stable MDF core. Reduces surface tension between your workpiece and the table.
• DUAL PURPOSE T-TRACK - We embed two sections of our dual purpose T-Track to create the attachment point for the fence. The track is anodized for wear resistance and laser engraved with measurement scales.
• 36 INCH FENCE - Engraved with zero in the middle, the fence is equipped with a bracket that slides in the embedded track. The fence brackets slide smoothly and lock securely.
• INCLUDED EXTRAS - Includes a tear-out-eliminating filler block, knuckle clamps for a wide range of stock thickness and shapes and stainless steel flip stops.

User questions & answers

Question:	What is the spacing of the two t tracks? trying to see if a rockler drill press fence would fit the tracks. thanks
Answer:	Drill press table will work! It means you're limited to 7.5" within outside edges of boards...no table can change this. What the table WILL do is increase the surface area boards rest on while drilling, provide moveable "Fences" with moveable "Stops" for more accurate and repetitive holes, and give you a stable smooth consistent near edges of under table to clamp to (vs small metal table with metal braces on the underside). 7.5" for your drill press...mine is 5.1" and WoodRiver Drill Press Table is working great for me!
Question:	is this really a 2 pack, two separate tables
Answer:	I was able to modify it to work on a small bench type drill press. the table is made of particle board. easy to modify fit. Don Ross
Question:	Is re-centering of the 36" adjustable fence entirely visual or is there a centering detent
Answer:	We are an OEM manufacturer, the production is the same quality as the original accessories, with strict reference to the original version of the standard.
Question:	How does this attach to the drill press table
Answer:	If your mill drill has a 3 jaw coupler on the end of the table, it will fit. If the end of the lead screw only has a round shank, this model will not work.

Product description

Great for bench-top tools like chop saws, drill presses, planers, scroll saws, and bandsaws. Support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber feet ensure stability and reduce machine vibration. The particle-board table top (with faux butcher block laminated finish) measures 13" x 23" and is 30-1/2" tall. Bottom measures 21" x 32". 700 lb. capacity. Please note: This product is not recommended for use with casters.

From the Manufacturer

The Shop Fox D2056 Tool Table is great for bench-top tools like chop saws, drill presses, planers, scroll saws, band saws, etc. Support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber' ensure stability and reduce machine vibration. Butcher block finish table top measures 13-Inch by 23-Inch and is 30-1/2-Inch tall. 700-Pound capacity.

• Sturdy design reduces machine vibration
• Support cross braces provide incredible strength
• Butcher block finish table top measures 13 by 23-Inch and is 30-1/2" tall
• 700-Pound capacity
• One-year warranty

User questions & answers

Question:	How to I get a replacement leg? Just set up the bench and the bottom of the leg has broken welds
Answer:	Butcher block finish table top measures 13" x 23" and is 30-1/2" tall. It also has a 700lb capacity. I would say yes. but it is a Craftsman....
Question:	Is this bench tall enough for a Craftsman Bench Top drill press
Answer:	Too many people have offered that it doesn't matter since they were clever enough to re-drill and tap their own size. I just wanted to confirm Frank Franz's helpful answer that these are M8 metric threads and Amazon does have locking casters that fit - just verify the thread on the casters is M8 and they fit just fine. I use the table as a base for a buffing station with 14" buffing wheels on a 36" wide shaft and the base is plenty stable.
Question:	Shop Fox D2056 Tool Table - can casters be screwed into legs? What size threaded post is needed
Answer:	Do you already have the Tool Table? If so, take the screw off of one leg of the table and take it to a hardware store or a lumber yard. The people who work there should have a gauge that will tell you the size of the screw and the thread pitch.
Question:	i want to put casters on this product, but i can't find the deminsion of the screw to the feet of this table. anybody have an idea
Answer:	Made.in China so there probably isn't one The best advice I.I can give you is to keep in greased and to use it for light projects

Product features

Shop Fox D2056 Tool Table

The Shop Fox D2056 Tool Table is great for bench-top tools like chop saws, drill presses, planers, scroll saws and bandsaws.

Arched support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber feet ensure stability even on irregular surfaces.

Stable Work Surface

The D2056 Shop Fox Tool Table is designed to give you a solid, stable work surface. This table has a 700 lb. capacity and yet it is light enough to be portable. The 13 inches x 23 inches x 1 inch butcher block laminate work surface is the perfect size for bench-top tools.

Option to Add a Second Shelf

A second shelf can be added to the base, resting on the cross brace supports. This shelf can be cut from any plywood, solid wood, particle board or MDF material.

Use Included Feet

Please use the included feet. Casters are not recommended for use with this product.

Adjustable Feet

This tool table features adjustable rubber feet to reduce vibration and assure a firm grip even when the floor surface may not be level.

Footprint

The D2056 footprint is just 32 inches x 21 inches, ideal for shops with limited space.

Product description

Entertaining Your guests is what Broil King specializes in. The Regal is designed to help you create mouth-watering dishes that will be the hit of the backyard party. Featuring Broil King performance grilling technology (PGT), the Regal S490 Pro will help you cook The perfect steak, delicious & juicy hamburgers, & succulent chicken & chops. The PGP system incorporates the key components of the grill providing precise control & that delicious BBQ flavor: A deep, durable cook box; Heavy & durable 9mm solid rod Stainless Steel cooking grids that are up to 56% heavier than those in those in other leading brands; a Stainless Steel Flab-R-Wave cooking system that hasp to 40% more coverage than comparable grills; patented Dual-Tube burners with ports along each side for a total of 8 rows of flame; linear flow valves that allow you to precisely control the temperature of your grill in any weather conditions. All of The features that have made Broil King an industry leader are packed into this grill, from the fit & finish to outstanding grilling performance. For the Outdoor chef who lives To entertain; welcome to the Regal series. Proudly built in North America & built to last.

• This product is a Natural Gas unit and you must have Natural Gas plumbed out to your patio or deck to be able to use this grill; If you do not have Natural Gas plumbed, please look at our selection of Propane barbecues
• Make the perfect steak - With patented Stainless Steel Dual-Tube burners and the innovative Flab-R-Wave Stainless Steel cooking system, The Regal S490 Pro will give you even temperatures across the cooking surface ensuring juicy and delicious results
• Durable cooking grids - Solid rod 9mm Stainless Steel cooking grids are up to 56% heavier than those in comparable grills, providing great heat retention and giving bold sear marks; Stainless Steel provides lasting durability so your grill is always ready
• Do more with your grill - the powerful side burner is perfect for preparing sides and heating up your favorite BBQ sauce; use the rear rotisserie burner and included Premium rotisserie kit to cook a delicious and juicy whole chicken or leg of lamb
• Make your next cookout a bit brighter - the cool blue LED-lit control knobs let you see exactly where the controls on your grill are set and add a stylish glow to your Outdoor patio space
• PROUDLY MADE IN NORTH AMERICA - with a limited lifetime cook box warranty, 10-year warranty on burners, cooking grids, and Flab-R-Wave, and 2-year warranty on remaining parts and paint, rest easy knowing your grill will perform for years to come

User questions & answers

Question:	is infra red heat on this grill
Answer:	Thank you for your question. This Regal grill comes with our standard 15,000 BTU side burner, however it is compatible to have our Infrared burner installed should you prefer that option. Any other questions or concerns can be directed to our customer support team at 1-800-265-2150 or email [email protected]
Question:	What accessories come with the Regal s
Answer:	You get the rotisserie and a grill lift tool
Question:	Can the broil king regal s590 pro be converted to natural gas
Answer:	Yes, it is possible to purchase the necessary components to convert the grill to Natural Gas. Please contact our customer support team at 1-800-265-2150 or [email protected] for more details.
Question:	How is cleaning the grease trap and where is it
Answer:	It's pretty simple. You can access it by opening the cabinet door (left side) and pulling out the top drawer (right side). The trap is a small square metal dish that slides on and off rails that are affixed to the grease drainage conduits. You can wipe or pour out the grease and wash with dish soap.

Product description

Specification:

Type: Iron Bottom Bracket

Min- Max Clamp : 38-43mm

Main Rod : 25*400mm

Size : 400*155*155mm

Specification:

Type: Iron Bottom Bracket

Min- Max Clamp : 38-43mm

Main Rod : 25*400mm

Size : 400*155*155mm

Trip: 60mm (50mm is most suitable for long time work)

Base: Cast Iron Base

Quantity: 1x Drill Bracket

Features:

90Degree rotable to drill slant hole. Copper plug readjustment to confirm the precision and durable.

Precise graduation, transparent pointer, spacing function.



Note:

The jaws specifications 38-43mm, comes with adapter sleeve can take about 38-43mm. Please amount under before making your drill size.

If the drill can be slightly smaller cut yourself some piece of cardboard or rubber mat, if your drill size larger than the jaws (more than 43mm), then do not buy it.

Package includes:

1 pc of drill stand (electric drill in the picture is NOT included)

Trip: 60mm (50mm is most suitable for long time work)

Base: Cast Iron Base

Quantity: 1x Drill Bracket

Features:

90Degree rotable to drill slant hole. Copper plug readjustment to confirm the precision and durable.

Precise graduation, transparent pointer, spacing function.

Note:

The jaws specifications 38-43mm, comes with adapter sleeve can take about 38-43mm. Please amount under before making your drill size.

If the drill can be slightly smaller cut yourself some piece of cardboard or rubber mat, if your drill size

larger than the jaws (more than 43mm), then do not buy it.

Package includes: 1 pc of drill stand (electric drill in the picture is NOT included)

• ✔Original Clamping range:43 mm,and it could be adjusted to be from 38 mm to 43 mm by 3 adapter sleeves that comes with this drill stand.
• This heavy duty drill stand, with 90 Degree Rotation, can act as a drill press, tool holder and flex shaft holder all in one for applications like drilling, sanding and buffing.. Drill accurate perpendicular and angled holes.
• by 3 adapter sleeves that comes with this drill stand. ✔Flex shaft tool stand - allows telescopic adjustment to any height between 16 and 29 In. Working stroke：60 mm, Down stroke：60 mm,
• Copper plug readjustment to confirm the precison and durable.Precise graduation:transparent pointer,spacing fuctuion
• ✔Sturdy metal base (cast iron)with 4 clamping points - to securely hold work piece.

User questions & answers

Question:	Are any parts on this tool made from Plastic
Answer:	The black part pops right out, but the yellow part is not 2.5", it's a permanent part of the press, so I think altering it would be difficult but not impossible.
Question:	Will this work with rotory tools like a Dremel
Answer:	it is the whorst tool I have purshased, so weak, just for soft wood
Question:	can the drilling angle be adjusted? It looks like it can be in the photos, but not mentioned in the description
Answer:	I bought the Milescraft 1318 drillmate drill guide with chuck
Question:	How accurate is this thing? Is there any play when drilling
Answer:	Not really, I will suggest you get a real drill press