11 best porter cable

Product description

The Porter cable PCCK619L2 20V 2-Tool Brushless Combo kit features a Pcck607 20V Brushless drill/driver, along with a Pcck647 20V Brushless impact driver. Brushless motors provides 50% more run time. The 1/2-in drill/driver contains powerful motor with 370 UWO of power for heavy-duty applications with minimal stall, and its two-speed transmission has 450/1, 800 RPM for speed of drilling and fastening applications. Mode collar allows you to switch from drilling to fastening mode without losing your clutch setting. The 1/4-in impact driver motor provides 1, 400 in-lbs. of torque for large fastening applications, with a transmission that provides 2, 700 max RPMs for speed of fastening applications. 1/4" Quick Change hex for one handed Quick and easy bit changes. These two tools offer a compact size ideal for work in tight spaces and lightweight for reduced user fatigue. Backed by Porter CABLE'S 2 year limited warranty. Includes: 1) Pcck607 Brushless drill/driver, 1) Pcck647 Brushless impact driver, 2) 1.5Ah batteries, 1) charger.

• Brushless motor provides 50% more run time
• Pcck607 1/2" drill/driver contains powerful motor with 370 UWO of power for heavy-duty applications with minimal stall
• Drill/driver has a two-speed transmission with 450/1, 800 RPM
• Pcck647 1/4" impact driver transmission provides 1, 400 in-lbs. of torque for large fastening applications
• Impact driver transmission provides 2, 700 max RPM's

User questions & answers

Question:	Why has the price skyrocketed by that much
Answer:	Demand and tariffs
Question:	Which is the best battery for these? I want to buy some extras for this set
Answer:	I use the smaller batteries. I have extras so there is always one on the charger. Bonus is that they weigh a bit less so if you really are using it to the battery life in one sitting it wont be so fatiguing. Check around as sometimes its cheaper to buy additional tools with batteries then you have an extra tool and an extra battery.
Question:	What is chuck size of impact drill
Answer:	1/4 inch hex impact driver—- basic home use.
Question:	Is the impact driver strong enough to remove lawn mower blades from a commercial mower
Answer:	Most likely WILL NOT break the bolt loose. I use these often doing commercial appliance installations and kiosk relocations. About 5 pounds of constant pressure is the most I would push them.

Product features

PORTER-CABLE 20V MAX Cordless Drill Combo Kit

This 20V MAX Brushless Compact Cordless Drill/Impact Driver 2-Tool Combo Kit delivers extended runtime with its high-efficiency motor. The 2-speed transmission provides the right speed for any fastening or drilling task. At just 8 in. and 3.2 lbs., you can work all day with this Drill/Driver. The Impact Driver also features a brushless motor for up to 50% more runtime, and it produces 1400 in.-lbs. torque for driving large fasteners with a max speed of 2700 RPM.

FEATURES

• Drill brushless motor provides 360 MWO for heavy and fast applications
• Drill high performance two speed transmission with RPM's of 0-430 and 0-1700 for speed of fastening
• Drill compact size of 8" for work in tight areas
• Impact Driver provides 1400 in-lbs torque for driving large fasteners
• Impact Driver max RPM's of 2700 for speed of fastening
• Impact Driver compact (5.8") and lightweight design (2.9 lbs) for ease of use
• Pro grade lithium ion batteries for maximum performance included
• Lithium Ion Charger

Product description

The PORTER-CABLE PCCK619L8 20V Max 8-Tool Combo Kit provides the tools needed to get the job done. This kit consists of : 1/2" Drill/Driver, 1/4" Impact Driver, 6 1/2" Circular Saw, Reciprocating Tiger Saw, Jig Saw, Oscillating Multi-tool, Cutoff tool/grinder, and LED flashlight. The Drill features a high-performance motor and a two-speed gear box that delivers the power needed to complete tasks easily. The Impact driver offers 1450 in/lbs of torque, and 0-2,800 RPM, 0-3,100 BPM. The 6-1/2" Circular Saw has a high-performance motor that delivers 4000 RPM's for aggressive cutting, and a beveling shoe that pivots up to 50 degrees. The Reciprocating Saw delivers 1" stroke length and 0-3,000 SPM with a compact design allows tool to reach tight spaces and a tool free blade release. The Jig Saw features 3 orbital settings and a variable speed trigger (0-2,500 SPM). The Oscillating Multi-Tool also offers a variable speed dial (8K-18K OPM) along with a LED work light for better visibility. The Cutoff Tool operates on a high-performance motor that produces 8,500 rpm and has a 3-position side handle for easy of use. And finally, the Flashlight has a pivoting head with 4 LED bulbs that delivers 120 Lumens. Kit includes: PCC601 1/2" Drill Driver, PCC641 1/4" Impact Driver, PCC660 6 1/2" Circular Saw, PCC670 Reciprocating Tiger Saw, PCC650 Jig Saw, PCC710 Oscillating Multi-Tool, PCC761 Cutoff tool/grinder, PCC700 LED Flash light, PCC680 1.5Ah battery PCC685 4.0Ah battery PCC699L 1amp charger kit bags. Power Tool Type - Cordless

• PERFORMANCE: Delivers power to complete a wide range of jobsite applications.
• ERGONOMIC DESIGN: Lightweight tools designed to fit the users' needs.
• RELIABILITY: Tools backed by a 3 year limited warranty.
• INCLUDES: Drill Driver, Impact Driver, Circ Saw, Tiger Saw, Jig Saw, Multi-Tool, Grinder, Flash light, 2 Batteries, Charger, 2 Bags
• PART OF THE PORTER-CABLE 20V MAX* SYSTEM: Battery works with all Porter-Cable 20V MAX* lithium ion products.

User questions & answers

Question:	Has anybody else realized there are 9 tools pictured in the 8 Tool Combo set and I'm wondering what is pictured directly behind the circular saw
Answer:	There are 8 tools. What you are seeing is the handle for 6 1/2" Circular Saw. I have this kit and checked the count.
Question:	Will these tools work well on off grid homestead
Answer:	As long as you have a 110 volt source for recharging the batteries they would work fine. But being off the grid I don't know if you have a power source to run the charger?
Question:	Will the 5amp batteries work within kits charger and tools
Answer:	If you're referring to the aftermarket 5.0 amp hour batteries sold FOR the Porter Cable 20v Max system here on Amazon, the answer is YES. And they work great! I have bought 6 of those 5AH batteries here (I think the brand is "PowerExtra.") No looking back. One note on those batteries. If using the PC Rapid Charger.. Sometimes they will cause the charger to throw a "defective battery" flashing light when they're about 2/3 charged. The battery is fine. Just remove it from the charger for a few seconds, firmly reinsert it in the charger, and allow it to finish charging.These batteries last a really long time between chargeshttps://www.amazon.com/gp/product/B01KETUOPC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	i count 9 tools. what is the one behind the circular saw in the first picture, it looks like a sander
Answer:	Magnify the image on Amazon. It's eight tools and that one that looks like another tool is actually the battery charger.Btw.. I HIGHLY recommend this set of tools.. Have had a couple or several of every item in this 20v system for over two years.. Reliable, durable, and indispensable!One note.... Be sure to buy a few of the 4.0 amp hour batteries if you intend to do signif projects with these tools

Product features

PCC601 1/2" Drill Driver

Features a high-performance motor that delivers 1,500-RPM and an LED helps to illuminate low-light or dark areas.

PCC641 1/4" Hex Impact Driver

Features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for power on a variety of applications. Its LED helps to illuminate low-light or dark work areas.

PCC650 Jig Saw

Features a variable-speed trigger that delivers 0-2,500-SPM and a 3/4-in stroke length for a variety of cutting applications.

PCC660 6 1/2" Circular Saw

Features a large cutting capacity up to 50° for efficient cutting.

PCC670 Reciprocating Tiger Saw

Delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. Its compact design is ideal for cutting in tight spaces.

PCC700 LED Flash light

Helps to Illuminate dark work areas.

PCC710 Oscillating Multi-Tool

Features variable-speed that produces 8,000-18,000-OPM for optimum performance on a variety of applications. Its tool-free blade clamp, universal fitment and LED provide ease of use.

PCC761 Cutoff Tool/Grinder

Features a variable speed of 8,000-18,000-OPM and easily switches between cutting and grinding.

PCC680L 20V MAX* Lithium Ion 1.5Ah Battery

Interchangeable with all the tools in this kit.

PCC685L 20V MAX* Lithium Ion 4.0Ah Battery

Delivers power and runtime.

Two Kit Bags

Great for storing the tools that are included in this kit.

Product description

The PORTER CABLE PCCK604L2 20V MAX 2-Tool Cordless Drill/Driver and Impact Driver Combo Kit has everything you need for drilling and impact driving. The 1/2 in. 2-speed drill driver is compact at 8-1/4 in. long and weighs 3-1/2 lbs. The 1/4 in. impact driver is also compact at 6-9/10 in. long with a weight of 3-1/3 lbs. Both have ergonomic handles, LED lights and bit storage.

• 1/2 inch two speed drill/driver. High performance motor delivers 283 Units Watts Out and 0-350/0-1,500 RPM.
• Compact design 8.25 inch long and 3.5 lbs. Drill features an ergonomic handle design, LED light and bit storage
• 1/4 inch impact driver delivers 1450 in/lbs of torque, 0-2,800 RPM and 0-3,100 BPM. Quick load chuck for one handed bit changes.
• Compact design 6.9" long and 3.3 lbs.Impact driver features an ergonomic handle, LED light and bit storage
• 20V MAX 1.3 Ah lithium ion batteries included. Professional grade batteries deliver more runtime and are lighter weight than traditional NiCd batteries

User questions & answers

Question:	Does the drill have clutch settings
Answer:	Yes Low and high torque and 24 postition slip clutch.
Question:	Whats the difference between pcck604l2 and pcck602l
Answer:	What comes in the box is the difference. For inatance one might come with a hard case and the other may come with a carry bag
Question:	does the drill have led lights
Answer:	Yes it does. There is a small LED light on both the drill and the impact driver.
Question:	is the drill 1/2 chuck size
Answer:	Yes it is 1/2 inch chuck size

Product features

PCC601 1/2" Compact Drill/Driver

Features a high-performance motor that delivers 1,500-RPM and an LED to help illuminate low-light or dark areas.

PCC641 1/4" Hex Impact Driver

Features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for optimum power on a variety of applications. Its LED helps to illuminate low-light or dark work areas.

Two PCC681L 20V MAX* Batteries

Interchangeable with all the tools in this kit.

Product description

The PORTER CABLE PCC670B 20v MAX Lithium Bare Reciprocating Tigersaw features a high herformace drivetrain that delivers 1" stroke length and 0-3,000 SPM for aggressive cutting speed. The compact design allows tool to reach tight spaces at only 14.5" in length and the tool free blade release allows for quick and easy blade changes. A variable-speed trigger provides more control for cutting a variety of materials and the pivoting shoe helps keep constant contact with material. It has a contoured overmolded handle that is optimized for increased comfort. This tool is part of the 20V Max System - a high performance cordless platform. (This is a bare tool item - battery sold separately).

• High Performace Drivetrain delivers 1" stroke length and 0-3,000 SPM
• Compact design allows tool to reach tight spaces
• Tool Free Blade Release
• Variable-speed trigger
• Part of the 20V Max System

User questions & answers

Question:	What kind of battery comparable
Answer:	It has to be used with the Porter Cable 20v MAX battery, any of them will work either the 1.3 amph (black ones), the 1.5 amph (most common), the 2.0 (only with hammer drill), or the 4.0 amph.
Question:	I have a nicd 18 v battery. will this work with this saw
Answer:	No it only works with lithium ion. 20 volt batteries.
Question:	How long to recharge the battery
Answer:	I have two batteries, so one is always charged. It doesn't take long - the charging battery is always ready before the spare runs out.
Question:	I have an 18 Volt charger.Will this charger charge this 20 volt battery
Answer:	I don't think so. If you can afford it though, upgrade to the 20 volt lithium. Lowes has the drill, impact driver, 2 batteries and charger and a bag to carry it all in. $189 That's what I bought after my son the Contractor told me to get. I then added this saw and I can tell you, it is bad to the bone.

Product description

• 20 volt max 1/2 inch drill/driver
• Comes with 1 battery and 4 hour charger
• Includes double ended bit tip
• High performance motor 330 UWO
• 1/2 inch all metal ratcheting chuck; prevents bit from slipping
• Integral LED work light illuminates dark work areas
• Battery fuel gauge; indicates remaining battery charge

User questions & answers

Question:	how many settings does the chuck have
Answer:	22 torque settings, one drill setting, 2 speeds
Question:	Trae cargador
Answer:	Si viene con cargador, muy buen taladro
Question:	does the one battery set includes a standard charger or the PORTER-CABLE PCC690L 20-Volt Lithium Ion Charger
Answer:	i received the basic charger PCC695L with the one battery option... the Description at the top of the page is what i received. "Kit includes one battery, a charger, and a double ended bit tip"... at the bottom of the page, it states this:"What's in the BoxOne PORTER-CABLE PCC606LA kit, including one PCC600 20-volt max 1/2-inch drill-driver, one PCC680L lithium-ion compact battery, one PCC690L lithium-ion charger, and one double-ended bit tip." It even has a model # for the quick charger(PCC690L)... could be a typo but still very misleading...
Question:	If a buyer expected to receive a "kit box" or case, as is noted in the product description under the title "What's in the Box", would've these expectations been met
Answer:	In the corrugated box (manufacturer's packaging) there is no case. There is a 20 volt Lithium 1/2" drill driver (1), a Lithium Ion Battery (1), a Lithium Ion Charger (1), and a Double Ended Bit Tip (1).

Product features

Porter - Cable PCCK600LB 20V 1/2-Inch Lithium Ion Drill/Driver Kit

Features:

Product description

The PORTER-CABLE PCC740B 1/2" cordless impact wrench, bare tool features a powerful motor which produces 330ft/lbs of torque for heavy applications. It offers a maximum of 1,650 rpm's for driving large fasteners quickly, with a full variable speed trigger for precision control. The 1/2" hog ring allows for quick and easy socket changes. It also has a pro grade lithium battery for long life and maximum performance, along with a led light which helps improve visibility in dark areas. This impact driver is designed with a chemical resistant housing for automotive friendly settings. It also offers the user over mold grips for comfort during use. This unit is lightweight and balanced at 6.0 lbs with battery, and it has a short length measuring 9.9" front to back. *This is a bare tool item - battery sold separately. Backed by porter-cable's 3 year limited warranty. Includes: impact wrench.

• Powerful motor produces 330ft/lbs of torque for heavy applications
• Maximum of 1,650 rpm's for driving large fasteners quickly
• 1/2" hog ring for quick and easy socket changes
• Full variable speed trigger for precision control
• 3 year limited warranty

User questions & answers

Question:	What type of pcc battery does the impact wrench pcc740B require
Answer:	About 20lbs
Question:	How many on lbs and how many off lbs? Can't find anything clear about this
Answer:	Certainly, with the right polishing compound and wax.
Question:	Does this have enough power to remove axle nuts
Answer:	I looked on my buffer and it said 3450 rpm on the name plate.
Question:	Will this loosen lug nuts
Answer:	120 volts. Household voltage.
Question:	Is the speed adjustable or is it one speed? On which the drill turns
Answer:	The Central Machinery 6" Buffer is placarded to turn 3,450RPM
Question:	Does the charger shut off after charging
Answer:	What size are the arbor/shifts? 3/4, 5/8, 1/2"?
Question:	I can't seem to see much difference in the 604L2 and the 602L2 other than price, can anybody help me make a decision on which to buy
Answer:	The buffer is great and it's bright yellow as shown...Wazp Trikes
Question:	Can someone explain the difference between this set from Porter Cable and the Porter Cable set with Model #PCCK604L
Answer:	I don't think you will have any problem. Copper is pretty soft. So far all I have polished is aluminum engine accessories. When I started & was using a. cutting compound I could overload it if I tried but I would let up a little

Product features

PCC600 1/2" Drill Driver

Features 330 units watts out (UWO), a two speed gear box (0-400/0-1,600), compact design (7.6 in. long/3.8 lbs.), and a 1/2-inch metal ratcheting chuck.

PCC640 Impact Driver

Features 1,495 in/lbs. of max torque, 0-2,900 RPM, 0-3,100 BPM, compact design (6.2" long/3.5 lbs.) and a one handed easy load 1/4" hex chuck.

Two PCC680L 20V Max 1.5Ah Batteries

Delivers power and runtime.

PORTER-CABLE 20V MAX Impact Wrench, 1/2-Inch, Tool Only (PCC740B)

Our 20V MAX 1/2 in. Cordless Impact Wrench is lightweight and balanced, and it delivers 330 ft/lbs. of torque for heavy-duty jobs. It offers a maximum of 1,650 RPM for driving large fasteners quickly. A variable speed trigger gives you precise control. The 1/2 in. hog ring allows for quick and easy socket changes. The 20V MAX battery provides long life and maximum performance, and an LED provides improved visibility in dark areas. This impact driver is designed with a chemical resistant housing for automotive settings.

FEATURES & SPECS

• 330 FT-LBS of torque for heavy applications
• 1,700 RPM for speed of application
• 1/2" Hog Ring for ease of socket change
• LED light for visibility in dark areas
• Lightweight and balanced at 6.0 lbs with battery
• Short length measuring 9.9" front to back
• Full variable speed trigger for added control
• Overmold grips for comfort during use

Product description

The Porter cable PCC685LP 20V max* 4.0 amp hours Lithium power tool battery, 2PK features No memory loss and minimal self-discharge so battery is ready when needed. These two 4Ah batteries deliver maximum runtime for heavy duty applications. Powers all Porter cable 20-Volt max power tools. Backed by Porter CABLE'S 2 year limited warranty. Includes: 4.0Ah maximum runtime batteries.

• Two 4Ah batteries deliver maximum runtime for heavy duty applications
• No memory loss and minimal self-discharge means the battery is ready when needed
• Powers all Porter Cable 20-volt max power tools for your convenience
• Backed by a Porter Cable 2 year limited warranty

User questions & answers

Question:	what is the input voltage
Answer:	For all around versatility I would go with a medium action unless you're fishing heavy soft plastics in thick cover or throwing large hard baits etc. For a good general bait caster I would recommend the medium action rod. I have 30lb power pro braid on mine and it works great. 10 to 20 pound mono would be fine also.
Question:	What shipping method is used? the last few orders i've placed haven't been delivered by ups and fedex. priority mail always delivers though
Answer:	The rod is not meant to be totally inserted (flush) and should have some space so that when the graphite starts to wear down it still is usable (the insert is actually longer than the female end), the space is reserved for use in the future. To make it easier, get some 200 grit sand paper and just lightly sand it if you are having trouble and want it flush (though this would void it) We want to set aside a part of the material, let the customer see its material, and a better understanding of this pole.
Question:	Does this battery work with Sears Bolt-On systems? It seems like the same form factor, the same charger, and everything
Answer:	I used a bit of light lubrication at the joints. Very sparing! This seems to eliminate the need for much force but does not interfere with it staying assembled when desired. I have several collapsible rods for the kayak and this is my go to method. Any light oil seems to work. My dad used to rub his two-piece rods on the side of his nose to lubricate them. It doesn't take much lubrication to aid release. Hope this helps.
Question:	Is this a real porter cable battery or or an imitation? i've seen several imitations out there which is why i was wondering
Answer:	The original test of line is 6 or 8 lb. It comes on the reel from manufacture. I personally prefer 2 or 4 lb test line because this is ultra super light tackle. So you can hold more line.
Question:	does this have the 4 mode contro
Answer:	Different, not bigger
Question:	Is it a gen 2? Does it have the settings button on the tip
Answer:	The longer the rod the farther you can cast.
Question:	El cargador es 220v
Answer:	Not sure what you mean by switch outlet??
Question:	Diference on 163,00 and 150.00 value
Answer:	I just got these. Have always put all batteries on a charger once installed. These like most took less than an hour to fully charge. ENJOY!

Product features

PORTER-CABLE 20V MAX Lithium Battery, 4.0-Ah, 2-Pack (PCC685LP)

The 20V MAX 4.0Ah Lithium Ion Battery features no memory loss and minimal self-discharge so the batteries are ready when needed.

These batteries deliver maximum runtime for heavy-duty applications.

Product description

ORBITAL JIG SAW 5.0 AMPS - Stanley Black & Decker is a world-leading provider of tools and storage, commercial electronic security and engineered fastening systems, with unique growth platforms and a track record of sustained profitable growth. Included Components: BDEJS600C Jigsaw, Jigsaw Blade; Stroke Length: 3/4 in; Stokes per Minute: 3 000 spm; Tool Weight: 4.6 lbs

• Curve Control technology which allows you to adjust the saw's orbit in 1 of 4 customized settings
• 5 Amp variable-speed motor; up to 3,000 SPM of cutting power
• Can make 45 degree bevel cuts; with adjustable shoe for stability
• New and improved Wire Guard
• Dust blower
• New and improved Wire Guard for more precise cuts
• Keyless blade clamp for tool-free blade change

User questions & answers

Question:	Can you cut nails off of pallets
Answer:	Yes you can. Use a fine blade and put duc tape on both sides of the glass mark your line on the tape then cut
Question:	Will this be strong/accurate enough to cut the shape of a knife handled through a 2"x 10" x 1/2 inch think hard blog of jeans and fiberglass resin
Answer:	Yes. The harder you pull on the trigger the faster it goes.
Question:	does this come with blades, what is recommended
Answer:	Hi, Thank you for getting in touch! It is to inform you that it can cut nails but you may want to purchase appropriate blades for cutting metal. I hope this information addresses your needs. We look forward to welcoming you as our customer. Yours Sincerely, Sarfraz Customer Support Representative Tempus & Co.
Question:	What blade type/model can you use? Is there a specific blade made for this jigsaw
Answer:	The "orbital" refers to the circular motion of the blade. It moves up and down (as if on a y-axis) and also forward and backward (as if on the x-axis). The forward/backward motion is very slight compared to the up/down motion. It makes the cut more aggressive and a lot faster. Breaking down 2x4's goes very quickly. However, you can set the orbital motion from min to max, so this is very adjustable and this saw can still make very accurate cuts with the right blades.

Product description

The PORTER-CABLE PCCCK616L4 20V MAX 4-Tool Combo Kit offers the perfect combination of a 1/2" 2-speed drill/driver, a 5-1/2" Circular Saw, a Compact Reciprocating Saw, and a LED work light. It also includes PCC681L 20V MAX 1.3Ah Lithium Ion Batteries to keep you ready and working with little or no down-time. The 2-speed drill/driver gives you the power needed to complete applications with ease (283 Unit Watts Out, 0-350/0-1500). Its lightweight and compact design reduces .users fatigue (8.25" long and 3.5 lbs.), and features ergonomic handle design, LED light and bit storage. The 5 1/2" circular saw delivers 3700 RPM for a variety of cutting applications, and includes a 5 1/2" 18T carbide blade. This saw features tool free depth adjustment and bevels at 45 and 90 degrees for specialty cuts. The compact reciprocating saw features 0-3000 SPM, 7/8" stroke length, tool free blade change and pivoting shoe. And finally, this kit includes a LED work light which helps to brighten your work area. Included: Drill/Driver, Circular Saw, Reciprocating Saw, LED light, PCC681L Lithium Ion Batteries, PCC699L 20V MAX Lithium Ion Charger, Kit Bag, 5 1/2" 18T Circular Saw Blade, 6" Wood cutting reciprocating saw blade.

• PERFORMANCE: High Performance motors and impact mechanisms to power through jobs
• ERGONOMIC DESIGN: Compact and convenient design to alleviate jobsite hassles
• RELIABILITY: Tools backed by a 3 year limited warranty
• INCLUDES: PCC601 Drill Driver, PCC661 Circle Saw, PCC671 Recip Saw, PCC701 Flashlight, 20V MAX* Lithium Ion Batteries, Charger
• PART OF THE PORTER-CABLE 20V MAX* SYSTEM: Battery works with all Porter-Cable 20V MAX* lithium ion products

User questions & answers

Question:	could you pass me the total weight of the kit
Answer:	Shipping weight is 16.3 lbs.
Question:	What is the return policy
Answer:	Return policy for what? Look at what ever item you are buying from Amazon. It is ususally listed some where.
Question:	Does this come with two batteries
Answer:	Yes it does,and unless you use it in a commercial app. it's more than enough.If used in commercial app..the buel batteries and charger will fit the bill, exhalant product, I'm a contractor
Question:	What is the difference between this combo set and the pcck 614L4 combo set
Answer:	The LED light is different. Also the circular saw in the 614L4 is a 6 1/2" cut instead of a 5 1/2" cut. Not sure of any other differences.

Product features

PCC601 1/2" Compact Drill/Driver

Features a high-performance motor that delivers 1,500-RPM and an LED helps to illuminate low-light or dark areas.

PCC661 Circular Saw

Features high-performance motor (3,700 RPM), 5-1/2-in 18-tooth carbide blade (2-1/8-in cutting capacity), and beveling shoe (50 degrees).

PCC671 Reciprocating Saw

Delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. Its compact design is ideal for cutting in tight spaces.

PCC701 LED Flash light

Helps to illuminate dark work areas.

Two PCC681L 20V MAX* 1.3Ah Lithium Ion Batteries

Delivers power and runtime.

PCC699L Standard Charger

Charges the batteries for future use.

Kit Bag

Great for storing the tools that are included in this kit.

Product description

The PORTER-CABLE PCC790LA 20V MAX Lithium 18GA Brad Nailer Kit is 100% battery powered which eliminates need for compressor, hose or costly gas cartridges. The special motor design provides consistent firing power into various materials and climate conditions. This nailer features multiple tool free settings to provide increased productivity and user safety. The unit's lightweight and optimal center of gravity provide user comfort in multiple positions reducing user fatigue. It also offers multi functional dual LED lights to light up your workspace, and indicate errors. Fastener length capacity of 5/8" - 2", magazine capacity of 100, with sequential firing mode and trigger lock. Includes Battery, and Charger.

• NO COMPRESSOR NEEDED: This cordless brad nailer is battery powered, eliminating the need for a compressor, hose, or expensive gas cartridges.
• CONSISTENT DRIVING DEPTH: Our depth adjustment wheel allows you to properly countersink nails consistently. Nail Diameter: 18 gauge
• INCREASED PRODUCTIVITY: A tool free release lever, jam release, and depth adjustment wheel make your life easier.
• BETTER RUNTIME: Included 1.5 Ah 20Volt MAX Lithium ion battery lasts longer than NiCad, charger included. Integrated Belt Hook: Yes
• 3 YEAR LIMITED WARRANTY: PORTER CABLE will repair, without charge, any defects due to faulty materials or workmanship for 3 years from the date of purchase.

User questions & answers

Question:	Does this come with a charger
Answer:	This one does come with a battery & charger, but they sell a model without a charger
Question:	Would this tool work to repair my fence
Answer:	Sure it can repair your fence and build you new fences too I use it every day for at least two hours . Great tool I have not use my compressor from I bought this tool. But do not use the nailer alone use screws too.
Question:	Will it go through 1" oak trim
Answer:	yes
Question:	can i use multiple lengths of nails
Answer:	5/8 inch through 2 inch nails....awesome gun...i am so happy with it

Product description

The PORTER CABLE PCCK6118 20V MAX* Lithium Ion 6 Tool Combo Kit features a Drill/Driver, Circular Saw, Recap Saw, Impact Driver, Oscillating Tool and light. The PCC601 Drill/Driver features 283 units watts out (UWO), 2-speed gearbox (0-350/0-1,500), 1/2-in chuck, and built in LED light. The PCC641 Impact Driver features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for optimum power, with a quick release 1/4" hex head chuck for easy one-handed bit changes. The PCC661 Circa Saw offers a high-performance motor (3,700 RPM), 5-1/2-in 18-tooth carbide blade and bevelling shoe (50 degrees). The PCC671 Recap Saw delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. Its compact design is ideal for cutting in tight spaces. The PCC710 Oscillating Tool features a tool-free system making adjusting and changing accessories quick and easy, along with arable speed dial (8K-18K OPM). A PCC650 Jigsaw offers 3 orbital settings with a variable speed trigger (0-2,500 SPM). The A PCCW205B Orbital Sander has a detachable dust bag and a vacuum port. The PCC701 LED Flashlight helps to illuminate dark work areas. Includes: PCC601 Drill/Driver, PCC641 Impact Driver, PCC661 Circa Saw, PCC671 Recap Saw, PCC710 Oscillating Tool, PCC701 Flashlight, PCC681L 1.3AH Batteries, Charger and Bag.

• Performance: High performance motors and impact mechanisms to power through jobs
• Ergonomic design: Compact and convenient design to alleviate job site hassles
• Reliability: Tools backed by a 3 year limited warranty. 5 inches Random Orbit Sander runs at 12,000 orbits per minute for efficient material removal. Reciprocating saw features high-performance drive train - 7/8 inches stroke length
• Part of the PORTER CABLE 20Volt max* system: Battery works with all PORTER CABLE 20V max* Lithium Ion products
• INCLUDES: PCC601 Drill Driver, PCC641 Impact Driver, PCC661 Circa Saw, PCC671 Recap Saw, PCC710 Oscillating Tool, PCC650 Jigsaw, PCCW205B Orbital Sander, PCC701 Flashlight

User questions & answers

Question:	Does the drill have a hammer drill setting for masonry drilling
Answer:	It does not have a hammer drill setting for masonry drilling.
Question:	I don’t see a battery charger, Is there one included
Answer:	Yes - a 3AH battery, a 1.3AH battery, and a charger. I don't know why the manufacturer is saying they only supply 1 battery in their response...
Question:	How thick of wood can the circular saw cut
Answer:	The cut capacity for the Circular Saw is 2".
Question:	Do all the tools have brushless motors
Answer:	No, all the tools inside the PCCK6118 kit are not brushless.

Product features

PORTER-CABLE PCCK6118 20V MAX Lithium Ion 8-Tool Combo Kit

This 20V MAX* Lithium Ion 8-Tool Combo Kit features a Drill/Driver, Circular Saw, Recip Saw, Impact Driver, Jigsaw, Sander, Oscillating Tool and Flashlight. For professional contractors, carpenters, and those in the trades, this combo kit provides the tools to deliver top-quality work without the hassle of extension cords.

• 1/2 in. Drill/Driver features 2-speed gearbox (0-350/0-1,500), compact design, and built-in LED light
• ircular Saw features high-performance motor (3,700 RPM), 5-1/2 in. 18-tooth carbide blade, and 50° beveling shoe
• Oscillating tool with tool-free accessory change and variable speed up to 18,000 oscillations per minute for sanding and cutting versatility
• Jigsaw with variable speed (0-2,500-SPM) provides speed control for clean and accurate cuts
• 1/4 in. Impact Driver provides 1,450 in-lbs max torque at 2,900 RPM and 3,000 BPM, and is equipped with a quick-release chuck